@@ -32,6 +32,7 @@
#define CTRL_IO_DUAL_DATA BIT(29)
#define CTRL_IO_QUAD_DATA BIT(30)
#define CTRL_COMMAND_SHIFT 16
+#define CTRL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI only */
#define CTRL_IO_DUMMY_SET(dummy) \
(((((dummy) >> 2) & 0x1) << 14) | (((dummy) & 0x3) << 6))
#define CTRL_CE_STOP_ACTIVE BIT(2)
@@ -293,6 +294,8 @@ static bool aspeed_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op
return true;
}
+static const struct aspeed_spi_data ast2400_spi_data;
+
static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
{
struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master);
@@ -322,6 +325,9 @@ static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *o
addr_mode |= (0x11 << chip->cs);
else
addr_mode &= ~(0x11 << chip->cs);
+
+ if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data)
+ ctl_val |= CTRL_IO_ADDRESS_4B;
}
if (op->dummy.buswidth && op->dummy.nbytes)
@@ -413,7 +419,13 @@ static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip)
struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 };
struct aspeed_spi_window *win = &windows[chip->cs];
- aspeed_spi_get_windows(aspi, windows);
+ /* No segment registers for the AST2400 SPI controller */
+ if (aspi->data == &ast2400_spi_data) {
+ win->offset = 0;
+ win->size = aspi->ahb_window_size;
+ } else {
+ aspeed_spi_get_windows(aspi, windows);
+ }
chip->ahb_base = aspi->ahb_base + win->offset;
chip->ahb_window_size = win->size;
@@ -476,6 +488,10 @@ static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip,
struct aspeed_spi_window *win = &windows[chip->cs];
int ret;
+ /* No segment registers for the AST2400 SPI controller */
+ if (aspi->data == &ast2400_spi_data)
+ return 0;
+
/*
* Due to an HW issue on the AST2500 SPI controller, the CE0
* window size should be smaller than the maximum 128MB.
@@ -560,6 +576,12 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
else
addr_mode &= ~(0x11 << chip->cs);
writel(addr_mode, aspi->regs + CE_CTRL_REG);
+
+ /* AST2400 SPI controller sets 4BYTE address mode in
+ * CE0 Control Register
+ */
+ if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data)
+ ctl_val |= CTRL_IO_ADDRESS_4B;
}
/* READ mode is the controller default setting */
@@ -860,6 +882,14 @@ static const struct aspeed_spi_data ast2400_fmc_data = {
.segment_reg = aspeed_spi_segment_reg,
};
+static const struct aspeed_spi_data ast2400_spi_data = {
+ .max_cs = 1,
+ .hastype = false,
+ .we0 = 0,
+ .ctl0 = 0x04,
+ /* No segment registers */
+};
+
static const struct aspeed_spi_data ast2500_fmc_data = {
.max_cs = 3,
.hastype = true,
@@ -904,6 +934,7 @@ static const struct aspeed_spi_data ast2600_spi_data = {
static const struct of_device_id aspeed_spi_matches[] = {
{ .compatible = "aspeed,ast2400-fmc", .data = &ast2400_fmc_data },
+ { .compatible = "aspeed,ast2400-spi", .data = &ast2400_spi_data },
{ .compatible = "aspeed,ast2500-fmc", .data = &ast2500_fmc_data },
{ .compatible = "aspeed,ast2500-spi", .data = &ast2500_spi_data },
{ .compatible = "aspeed,ast2600-fmc", .data = &ast2600_fmc_data },
Extend the driver for the AST2400 SPI Flash Controller (SPI). This controller has a slightly different interface which requires adaptation of the 4B handling. Summary of features : . host Firmware . 1 chip select pin (CE0) . slightly different register set, between AST2500 and the legacy controller . no segment registers . single, dual mode. Signed-off-by: Cédric Le Goater <clg@kaod.org> --- drivers/spi/spi-aspeed-smc.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)