diff mbox series

[v4,11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600

Message ID 20220325100849.2019209-12-clg@kaod.org (mailing list archive)
State Superseded
Headers show
Series spi: spi-mem: Convert Aspeed SMC driver to spi-mem | expand

Commit Message

Cédric Le Goater March 25, 2022, 10:08 a.m. UTC
From: Potin Lai <potin.lai@quantatw.com>

In AST2600, the unit of SPI CEx decoding range register is 1MB, and end
address offset is set to the acctual offset - 1MB. If the flash only has
1MB, the end address will has same value as start address, which will
causing unexpected errors.

This patch set the decoding size to at least 2MB to avoid decoding errors.

Tested:
root@bletchley:~# dmesg | grep "aspeed-smc 1e631000.spi: CE0 window"
[   59.328134] aspeed-smc 1e631000.spi: CE0 window resized to 2MB (AST2600 Decoding)
[   59.343001] aspeed-smc 1e631000.spi: CE0 window [ 0x50000000 - 0x50200000 ] 2MB
root@bletchley:~# devmem 0x1e631030
0x00100000

Signed-off-by: Potin Lai <potin.lai@quantatw.com>
[ clg : Ported on new spi-mem driver ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 drivers/spi/spi-aspeed-smc.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Pratyush Yadav March 30, 2022, 7:49 p.m. UTC | #1
> Subject: [PATCH v4 11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600

Nitpick: s/mtd: spi-nor: aspeed:/spi: aspeed:/

On 25/03/22 11:08AM, Cédric Le Goater wrote:
> From: Potin Lai <potin.lai@quantatw.com>
> 
> In AST2600, the unit of SPI CEx decoding range register is 1MB, and end
> address offset is set to the acctual offset - 1MB. If the flash only has
> 1MB, the end address will has same value as start address, which will
> causing unexpected errors.
> 
> This patch set the decoding size to at least 2MB to avoid decoding errors.
> 
> Tested:
> root@bletchley:~# dmesg | grep "aspeed-smc 1e631000.spi: CE0 window"
> [   59.328134] aspeed-smc 1e631000.spi: CE0 window resized to 2MB (AST2600 Decoding)
> [   59.343001] aspeed-smc 1e631000.spi: CE0 window [ 0x50000000 - 0x50200000 ] 2MB
> root@bletchley:~# devmem 0x1e631030
> 0x00100000
> 
> Signed-off-by: Potin Lai <potin.lai@quantatw.com>
> [ clg : Ported on new spi-mem driver ]
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>  drivers/spi/spi-aspeed-smc.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
> index 660451667a39..227797e13997 100644
> --- a/drivers/spi/spi-aspeed-smc.c
> +++ b/drivers/spi/spi-aspeed-smc.c
> @@ -466,6 +466,8 @@ static int aspeed_spi_set_window(struct aspeed_spi *aspi,
>   *   is correct.
>   */
>  static const struct aspeed_spi_data ast2500_spi_data;
> +static const struct aspeed_spi_data ast2600_spi_data;
> +static const struct aspeed_spi_data ast2600_fmc_data;
>  
>  static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip,
>  					 u32 local_offset, u32 size)
> @@ -489,6 +491,17 @@ static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip,
>  			 chip->cs, size >> 20);
>  	}
>  
> +	/*
> +	 * The decoding size of AST2600 SPI controller should set at
> +	 * least 2MB.
> +	 */
> +	if ((aspi->data == &ast2600_spi_data || aspi->data == &ast2600_fmc_data) &&
> +	    size < SZ_2M) {
> +		size = SZ_2M;
> +		dev_info(aspi->dev, "CE%d window resized to %dMB (AST2600 Decoding)",
> +			 chip->cs, size >> 20);
> +	}
> +
>  	aspeed_spi_get_windows(aspi, windows);
>  
>  	/* Adjust this chip window */
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
index 660451667a39..227797e13997 100644
--- a/drivers/spi/spi-aspeed-smc.c
+++ b/drivers/spi/spi-aspeed-smc.c
@@ -466,6 +466,8 @@  static int aspeed_spi_set_window(struct aspeed_spi *aspi,
  *   is correct.
  */
 static const struct aspeed_spi_data ast2500_spi_data;
+static const struct aspeed_spi_data ast2600_spi_data;
+static const struct aspeed_spi_data ast2600_fmc_data;
 
 static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip,
 					 u32 local_offset, u32 size)
@@ -489,6 +491,17 @@  static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip,
 			 chip->cs, size >> 20);
 	}
 
+	/*
+	 * The decoding size of AST2600 SPI controller should set at
+	 * least 2MB.
+	 */
+	if ((aspi->data == &ast2600_spi_data || aspi->data == &ast2600_fmc_data) &&
+	    size < SZ_2M) {
+		size = SZ_2M;
+		dev_info(aspi->dev, "CE%d window resized to %dMB (AST2600 Decoding)",
+			 chip->cs, size >> 20);
+	}
+
 	aspeed_spi_get_windows(aspi, windows);
 
 	/* Adjust this chip window */