| Message ID | 20221128020613.14821-9-xiangsheng.hou@mediatek.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add MediaTek MT7986 SPI NAND and ECC support | expand |
On 28/11/2022 03:06, Xiangsheng Hou wrote: > Split MediaTek ECC engine with rawnand controller and convert to > YAML schema. > > Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com> > --- > .../bindings/mtd/mtk,nand-ecc-engine.yaml | 60 ++++++ > .../devicetree/bindings/mtd/mtk-nand.txt | 176 ------------------ > .../devicetree/bindings/mtd/mtk-nand.yaml | 92 +++++++++ > 3 files changed, 152 insertions(+), 176 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml > delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt > create mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.yaml > > diff --git a/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml > new file mode 100644 > index 000000000000..80321157e928 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml Wrong vendor prefix. Isn't it mediatek? > @@ -0,0 +1,60 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mtd/mtk,nand-ecc-engine.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek(MTK) SoCs NAND ECC engine > + > +maintainers: > + - Xiangsheng Hou <xiangsheng.hou@mediatek.com> > + > +description: | > + MTK NAND ECC engine can cowork with MTK raw NAND and SPI NAND controller. > + > +properties: > + compatible: > + enum: > + - mediatek,mt2701-ecc > + - mediatek,mt2712-ecc > + - mediatek,mt7622-ecc > + > + reg: > + items: > + - description: Base physical address and size of ECC. > + > + interrupts: > + items: > + - description: ECC interrupt > + > + clocks: > + minItems: 1 Drop minItems. > + items: > + - description: clock used for the controller Drop items/description - it is obvious, isn't it? Rather maxItems: 1, Unless controller is not obvious in this context - about which controller you talk about? > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + > +unevaluatedProperties: false Instead: additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mt2701-clk.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + soc { > + #address-cells = <2>; Mismatched iindentation. 4 spaces for DTS. > + #size-cells = <2>; > + > + bch: ecc@1100e000 { > + compatible = "mediatek,mt2701-ecc"; > + reg = <0 0x1100e000 0 0x1000>; > + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_NFI_ECC>; > + }; > + }; > + > diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt > deleted file mode 100644 > index 4d3ec5e4ff8a..000000000000 > --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt > +++ /dev/null > @@ -1,176 +0,0 @@ > -MTK SoCs NAND FLASH controller (NFC) DT binding > - > -This file documents the device tree bindings for MTK SoCs NAND controllers. > -The functional split of the controller requires two drivers to operate: > -the nand controller interface driver and the ECC engine driver. > - > -The hardware description for both devices must be captured as device > -tree nodes. > - > -1) NFC NAND Controller Interface (NFI): > -======================================= > - > -The first part of NFC is NAND Controller Interface (NFI) HW. > -Required NFI properties: > -- compatible: Should be one of > - "mediatek,mt2701-nfc", > - "mediatek,mt2712-nfc", > - "mediatek,mt7622-nfc". > -- reg: Base physical address and size of NFI. > -- interrupts: Interrupts of NFI. > -- clocks: NFI required clocks. > -- clock-names: NFI clocks internal name. > -- ecc-engine: Required ECC Engine node. > -- #address-cells: NAND chip index, should be 1. > -- #size-cells: Should be 0. > - > -Example: > - > - nandc: nfi@1100d000 { > - compatible = "mediatek,mt2701-nfc"; > - reg = <0 0x1100d000 0 0x1000>; > - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; > - clocks = <&pericfg CLK_PERI_NFI>, > - <&pericfg CLK_PERI_NFI_PAD>; > - clock-names = "nfi_clk", "pad_clk"; > - ecc-engine = <&bch>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - > -Platform related properties, should be set in {platform_name}.dts: > -- children nodes: NAND chips. > - > -Children nodes properties: > -- reg: Chip Select Signal, default 0. > - Set as reg = <0>, <1> when need 2 CS. > -Optional: > -- nand-on-flash-bbt: Store BBT on NAND Flash. > -- nand-ecc-mode: the NAND ecc mode (check driver for supported modes) > -- nand-ecc-step-size: Number of data bytes covered by a single ECC step. > - valid values: > - 512 and 1024 on mt2701 and mt2712. > - 512 only on mt7622. > - 1024 is recommended for large page NANDs. > -- nand-ecc-strength: Number of bits to correct per ECC step. > - The valid values that each controller supports: > - mt2701: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, > - 32, 36, 40, 44, 48, 52, 56, 60. > - mt2712: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, > - 32, 36, 40, 44, 48, 52, 56, 60, 68, 72, 80. > - mt7622: 4, 6, 8, 10, 12, 14, 16. > - The strength should be calculated as follows: > - E = (S - F) * 8 / B > - S = O / (P / Q) > - E : nand-ecc-strength. > - S : spare size per sector. > - F : FDM size, should be in the range [1,8]. > - It is used to store free oob data. > - O : oob size. > - P : page size. > - Q : nand-ecc-step-size. > - B : number of parity bits needed to correct > - 1 bitflip. > - According to MTK NAND controller design, > - this number depends on max ecc step size > - that MTK NAND controller supports. > - If max ecc step size supported is 1024, > - then it should be always 14. And if max > - ecc step size is 512, then it should be > - always 13. > - If the result does not match any one of the listed > - choices above, please select the smaller valid value from > - the list. > - (otherwise the driver will do the adjustment at runtime) > -- pinctrl-names: Default NAND pin GPIO setting name. > -- pinctrl-0: GPIO setting node. > - > -Example: > - &pio { > - nand_pins_default: nanddefault { > - pins_dat { > - pinmux = <MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7>, > - <MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6>, > - <MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4>, > - <MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3>, > - <MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0>, > - <MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1>, > - <MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5>, > - <MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8>, > - <MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2>; > - input-enable; > - drive-strength = <MTK_DRIVE_8mA>; > - bias-pull-up; > - }; > - > - pins_we { > - pinmux = <MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB>; > - drive-strength = <MTK_DRIVE_8mA>; > - bias-pull-up = <MTK_PUPD_SET_R1R0_10>; > - }; > - > - pins_ale { > - pinmux = <MT2701_PIN_116_MSDC0_CMD__FUNC_NALE>; > - drive-strength = <MTK_DRIVE_8mA>; > - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > - }; > - }; > - }; > - > - &nandc { > - status = "okay"; > - pinctrl-names = "default"; > - pinctrl-0 = <&nand_pins_default>; > - nand@0 { > - reg = <0>; > - nand-on-flash-bbt; > - nand-ecc-mode = "hw"; > - nand-ecc-strength = <24>; > - nand-ecc-step-size = <1024>; > - }; > - }; > - > -NAND chip optional subnodes: > -- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt > - > -Example: > - nand@0 { > - partitions { > - compatible = "fixed-partitions"; > - #address-cells = <1>; > - #size-cells = <1>; > - > - preloader@0 { > - label = "pl"; > - read-only; > - reg = <0x00000000 0x00400000>; > - }; > - android@00400000 { > - label = "android"; > - reg = <0x00400000 0x12c00000>; > - }; > - }; > - }; > - > -2) ECC Engine: > -============== > - > -Required BCH properties: > -- compatible: Should be one of > - "mediatek,mt2701-ecc", > - "mediatek,mt2712-ecc", > - "mediatek,mt7622-ecc". > -- reg: Base physical address and size of ECC. > -- interrupts: Interrupts of ECC. > -- clocks: ECC required clocks. > -- clock-names: ECC clocks internal name. > - > -Example: > - > - bch: ecc@1100e000 { > - compatible = "mediatek,mt2701-ecc"; > - reg = <0 0x1100e000 0 0x1000>; > - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; > - clocks = <&pericfg CLK_PERI_NFI_ECC>; > - clock-names = "nfiecc_clk"; > - }; > diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.yaml b/Documentation/devicetree/bindings/mtd/mtk-nand.yaml > new file mode 100644 > index 000000000000..47a1334bcddd > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.yaml Filename more or less matching compatibles, so for example: mediatek,mtk-nfc > @@ -0,0 +1,92 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mtd/mtk-nand.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC) device tree bindings Drop "device tree bindings" > + > +maintainers: > + - Xiangsheng Hou <xiangsheng.hou@mediatek.com> > + > +allOf: > + - $ref: "nand-controller.yaml#" Drop quotes. > + > +properties: > + compatible: > + enum: > + - mediatek,mt2701-nfc > + - mediatek,mt2712-nfc > + - mediatek,mt7622-nfc > + > + reg: > + items: > + - description: Base physical address and size of NFI. > + > + interrupts: > + items: > + - description: NFI interrupt > + > + clocks: > + minItems: 2 Drop > + items: > + - description: clock used for the controller > + - description: clock used for the pad > + > + clock-names: > + minItems: 2 Drop > + items: > + - const: nfi_clk > + - const: pad_clk > + > + nand-ecc-engine: > + description: Required ECC Engine node > + $ref: /schemas/types.yaml#/definitions/phandle This does not look right. This is a property of NAND chip and original binding was saying this as well... or was it called ecc-engine in original bindings? But your commit msg did not explain any differences from pure conversion. > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 Drop, they come from nand-controller.yaml. > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - nand-ecc-engine > + - "#address-cells" > + - "#size-cells" Drop cells here as well. > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/mt2701-clk.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + nandc: nfi@1100d000 { > + compatible = "mediatek,mt2701-nfc"; Messed indentation. > + reg = <0 0x1100d000 0 0x1000>; > + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_NFI>, > + <&pericfg CLK_PERI_NFI_PAD>; Non aligned line. > + clock-names = "nfi_clk", "pad_clk"; > + nand-ecc-engine = <&bch>; > + #address-cells = <1>; > + #size-cells = <0>; Incomplete example. > + }; > + > + bch: ecc@1100e000 { > + compatible = "mediatek,mt2701-ecc"; > + reg = <0 0x1100e000 0 0x1000>; > + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_NFI_ECC>; > + }; > + }; Best regards, Krzysztof
On Mon, 28 Nov 2022 10:06:12 +0800, Xiangsheng Hou wrote: > Split MediaTek ECC engine with rawnand controller and convert to > YAML schema. > > Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com> > --- > .../bindings/mtd/mtk,nand-ecc-engine.yaml | 60 ++++++ > .../devicetree/bindings/mtd/mtk-nand.txt | 176 ------------------ > .../devicetree/bindings/mtd/mtk-nand.yaml | 92 +++++++++ > 3 files changed, 152 insertions(+), 176 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml > delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt > create mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/mtk-nand.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed: [{'const': 'nfi_clk'}, {'const': 'pad_clk'}] is too long [{'const': 'nfi_clk'}, {'const': 'pad_clk'}] is too short False schema does not allow 2 1 was expected hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/mtk-nand.yaml: properties:clocks: 'oneOf' conditional failed, one must be fixed: [{'description': 'clock used for the controller'}, {'description': 'clock used for the pad'}] is too long [{'description': 'clock used for the controller'}, {'description': 'clock used for the pad'}] is too short False schema does not allow 2 1 was expected hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml: properties:clocks: 'oneOf' conditional failed, one must be fixed: [{'description': 'clock used for the controller'}] is too short False schema does not allow 1 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/mtk-nand.example.dtb: nfi@1100d000: $nodename:0: 'nfi@1100d000' does not match '^nand-controller(@.*)?' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/mtk-nand.yaml doc reference errors (make refcheckdocs): Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/mtd/mtk-nand.txt MAINTAINERS: Documentation/devicetree/bindings/mtd/mtk-nand.txt See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221128020613.14821-9-xiangsheng.hou@mediatek.com This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command.
Hi Krzysztof, On Mon, 2022-11-28 at 10:13 +0100, Krzysztof Kozlowski wrote: > On 28/11/2022 03:06, Xiangsheng Hou wrote: > > Split MediaTek ECC engine with rawnand controller and convert to > > YAML schema. > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mtd/mtk,nand-ecc- > > engine.yaml > > Wrong vendor prefix. Isn't it mediatek? Yes, will be fixed. > > + > > + reg: > > + items: > > + - description: Base physical address and size of ECC. > > + > > + interrupts: > > + items: > > + - description: ECC interrupt > > + > > + clocks: > > + minItems: 1 > > Drop minItems. > > > + items: > > + - description: clock used for the controller > > Drop items/description - it is obvious, isn't it? Rather maxItems: 1, > Unless controller is not obvious in this context - about which > controller you talk about? Will be dropped and fix other comment in next series. > > + > > + > > + nand-ecc-engine: > > + description: Required ECC Engine node > > + $ref: /schemas/types.yaml#/definitions/phandle > > This does not look right. This is a property of NAND chip and > original > binding was saying this as well... or was it called ecc-engine in > original bindings? But your commit msg did not explain any > differences > from pure conversion. The MediaTek NAND controller driver have change ecc-engine to nand-ecc- engine property. Will dropped and explain the difference in commit msg. Best regards, Xiangsheng Hou
Hi Xiangsheng,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on broonie-spi/for-next]
[also build test WARNING on mtd/mtd/fixes linus/master v6.1-rc7]
[cannot apply to mtd/mtd/next next-20221130]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Xiangsheng-Hou/Add-MediaTek-MT7986-SPI-NAND-and-ECC-support/20221128-100858
base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
patch link: https://lore.kernel.org/r/20221128020613.14821-9-xiangsheng.hou%40mediatek.com
patch subject: [PATCH 8/9] dt-bindings: mtd: Split ECC engine with rawnand controller
reproduce:
# https://github.com/intel-lab-lkp/linux/commit/e446750f6e2d7e0ab515d0bdd4b3bba63f9e10c0
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Xiangsheng-Hou/Add-MediaTek-MT7986-SPI-NAND-and-ECC-support/20221128-100858
git checkout e446750f6e2d7e0ab515d0bdd4b3bba63f9e10c0
make menuconfig
# enable CONFIG_COMPILE_TEST, CONFIG_WARN_MISSING_DOCUMENTS, CONFIG_WARN_ABI_ERRORS
make htmldocs
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/mtd/mtk-nand.txt
diff --git a/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml new file mode 100644 index 000000000000..80321157e928 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/mtk,nand-ecc-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek(MTK) SoCs NAND ECC engine + +maintainers: + - Xiangsheng Hou <xiangsheng.hou@mediatek.com> + +description: | + MTK NAND ECC engine can cowork with MTK raw NAND and SPI NAND controller. + +properties: + compatible: + enum: + - mediatek,mt2701-ecc + - mediatek,mt2712-ecc + - mediatek,mt7622-ecc + + reg: + items: + - description: Base physical address and size of ECC. + + interrupts: + items: + - description: ECC interrupt + + clocks: + minItems: 1 + items: + - description: clock used for the controller + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + bch: ecc@1100e000 { + compatible = "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + }; + }; + diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt deleted file mode 100644 index 4d3ec5e4ff8a..000000000000 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ /dev/null @@ -1,176 +0,0 @@ -MTK SoCs NAND FLASH controller (NFC) DT binding - -This file documents the device tree bindings for MTK SoCs NAND controllers. -The functional split of the controller requires two drivers to operate: -the nand controller interface driver and the ECC engine driver. - -The hardware description for both devices must be captured as device -tree nodes. - -1) NFC NAND Controller Interface (NFI): -======================================= - -The first part of NFC is NAND Controller Interface (NFI) HW. -Required NFI properties: -- compatible: Should be one of - "mediatek,mt2701-nfc", - "mediatek,mt2712-nfc", - "mediatek,mt7622-nfc". -- reg: Base physical address and size of NFI. -- interrupts: Interrupts of NFI. -- clocks: NFI required clocks. -- clock-names: NFI clocks internal name. -- ecc-engine: Required ECC Engine node. -- #address-cells: NAND chip index, should be 1. -- #size-cells: Should be 0. - -Example: - - nandc: nfi@1100d000 { - compatible = "mediatek,mt2701-nfc"; - reg = <0 0x1100d000 0 0x1000>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_NFI>, - <&pericfg CLK_PERI_NFI_PAD>; - clock-names = "nfi_clk", "pad_clk"; - ecc-engine = <&bch>; - #address-cells = <1>; - #size-cells = <0>; - }; - -Platform related properties, should be set in {platform_name}.dts: -- children nodes: NAND chips. - -Children nodes properties: -- reg: Chip Select Signal, default 0. - Set as reg = <0>, <1> when need 2 CS. -Optional: -- nand-on-flash-bbt: Store BBT on NAND Flash. -- nand-ecc-mode: the NAND ecc mode (check driver for supported modes) -- nand-ecc-step-size: Number of data bytes covered by a single ECC step. - valid values: - 512 and 1024 on mt2701 and mt2712. - 512 only on mt7622. - 1024 is recommended for large page NANDs. -- nand-ecc-strength: Number of bits to correct per ECC step. - The valid values that each controller supports: - mt2701: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, - 32, 36, 40, 44, 48, 52, 56, 60. - mt2712: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, - 32, 36, 40, 44, 48, 52, 56, 60, 68, 72, 80. - mt7622: 4, 6, 8, 10, 12, 14, 16. - The strength should be calculated as follows: - E = (S - F) * 8 / B - S = O / (P / Q) - E : nand-ecc-strength. - S : spare size per sector. - F : FDM size, should be in the range [1,8]. - It is used to store free oob data. - O : oob size. - P : page size. - Q : nand-ecc-step-size. - B : number of parity bits needed to correct - 1 bitflip. - According to MTK NAND controller design, - this number depends on max ecc step size - that MTK NAND controller supports. - If max ecc step size supported is 1024, - then it should be always 14. And if max - ecc step size is 512, then it should be - always 13. - If the result does not match any one of the listed - choices above, please select the smaller valid value from - the list. - (otherwise the driver will do the adjustment at runtime) -- pinctrl-names: Default NAND pin GPIO setting name. -- pinctrl-0: GPIO setting node. - -Example: - &pio { - nand_pins_default: nanddefault { - pins_dat { - pinmux = <MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7>, - <MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6>, - <MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4>, - <MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3>, - <MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0>, - <MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1>, - <MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5>, - <MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8>, - <MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2>; - input-enable; - drive-strength = <MTK_DRIVE_8mA>; - bias-pull-up; - }; - - pins_we { - pinmux = <MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB>; - drive-strength = <MTK_DRIVE_8mA>; - bias-pull-up = <MTK_PUPD_SET_R1R0_10>; - }; - - pins_ale { - pinmux = <MT2701_PIN_116_MSDC0_CMD__FUNC_NALE>; - drive-strength = <MTK_DRIVE_8mA>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - }; - }; - - &nandc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_default>; - nand@0 { - reg = <0>; - nand-on-flash-bbt; - nand-ecc-mode = "hw"; - nand-ecc-strength = <24>; - nand-ecc-step-size = <1024>; - }; - }; - -NAND chip optional subnodes: -- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt - -Example: - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - preloader@0 { - label = "pl"; - read-only; - reg = <0x00000000 0x00400000>; - }; - android@00400000 { - label = "android"; - reg = <0x00400000 0x12c00000>; - }; - }; - }; - -2) ECC Engine: -============== - -Required BCH properties: -- compatible: Should be one of - "mediatek,mt2701-ecc", - "mediatek,mt2712-ecc", - "mediatek,mt7622-ecc". -- reg: Base physical address and size of ECC. -- interrupts: Interrupts of ECC. -- clocks: ECC required clocks. -- clock-names: ECC clocks internal name. - -Example: - - bch: ecc@1100e000 { - compatible = "mediatek,mt2701-ecc"; - reg = <0 0x1100e000 0 0x1000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_NFI_ECC>; - clock-names = "nfiecc_clk"; - }; diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.yaml b/Documentation/devicetree/bindings/mtd/mtk-nand.yaml new file mode 100644 index 000000000000..47a1334bcddd --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/mtk-nand.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC) device tree bindings + +maintainers: + - Xiangsheng Hou <xiangsheng.hou@mediatek.com> + +allOf: + - $ref: "nand-controller.yaml#" + +properties: + compatible: + enum: + - mediatek,mt2701-nfc + - mediatek,mt2712-nfc + - mediatek,mt7622-nfc + + reg: + items: + - description: Base physical address and size of NFI. + + interrupts: + items: + - description: NFI interrupt + + clocks: + minItems: 2 + items: + - description: clock used for the controller + - description: clock used for the pad + + clock-names: + minItems: 2 + items: + - const: nfi_clk + - const: pad_clk + + nand-ecc-engine: + description: Required ECC Engine node + $ref: /schemas/types.yaml#/definitions/phandle + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - nand-ecc-engine + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2701-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + nandc: nfi@1100d000 { + compatible = "mediatek,mt2701-nfc"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI>, + <&pericfg CLK_PERI_NFI_PAD>; + clock-names = "nfi_clk", "pad_clk"; + nand-ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bch: ecc@1100e000 { + compatible = "mediatek,mt2701-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_ECC>; + }; + };
Split MediaTek ECC engine with rawnand controller and convert to YAML schema. Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com> --- .../bindings/mtd/mtk,nand-ecc-engine.yaml | 60 ++++++ .../devicetree/bindings/mtd/mtk-nand.txt | 176 ------------------ .../devicetree/bindings/mtd/mtk-nand.yaml | 92 +++++++++ 3 files changed, 152 insertions(+), 176 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/mtk,nand-ecc-engine.yaml delete mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.txt create mode 100644 Documentation/devicetree/bindings/mtd/mtk-nand.yaml