diff mbox series

[09/14] arm64: dts: qcom: sc7180: Remove superfluous "input-enable"s from trogdor

Message ID 20230323102605.9.I94dbc53176e8adb0d7673b7feb2368e85418f938@changeid (mailing list archive)
State Accepted
Commit e8df226339fa032c49f8db4281903930d018a22c
Headers show
Series Control Quad SPI pinctrl better on Qualcomm Chromebooks | expand

Commit Message

Doug Anderson March 23, 2023, 5:30 p.m. UTC
As talked about in the patch ("dt-bindings: pinctrl: qcom: tlmm should
use output-disable, not input-enable"), using "input-enable" in
pinctrl states for Qualcomm TLMM pinctrl devices was either
superfluous or there to disable a pin's output.

Looking at trogdor:
* ap_ec_int_l, fp_to_ap_irq_l, h1_ap_int_odl, p_sensor_int_l:
  Superfluous. The pins will be configured as inputs automatically by
  the Linux GPIO subsystem (presumably the reference for other OSes
  using these device trees).
* bios_flash_wp_l: Superfluous. This pin is exposed to userspace
  through the kernel's GPIO API and will be configured automatically.

That means that in none of the cases for trogdor did we need to change
"input-enable" to "output-disable" and we can just remove these
superfluous properties.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 5 -----
 1 file changed, 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 1f2e1f701761..39100b0c1140 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1206,7 +1206,6 @@  amp_en: amp-en-state {
 	ap_ec_int_l: ap-ec-int-l-state {
 		pins = "gpio94";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -1229,7 +1228,6 @@  ap_suspend_l_neuter: ap-suspend-l-neuter-state {
 	bios_flash_wp_l: bios-flash-wp-l-state {
 		pins = "gpio66";
 		function = "gpio";
-		input-enable;
 		bias-disable;
 	};
 
@@ -1271,7 +1269,6 @@  fp_rst_l: fp-rst-l-state {
 	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
 		pins = "gpio4";
 		function = "gpio";
-		input-enable;
 
 		/* Has external pullup */
 		bias-disable;
@@ -1286,7 +1283,6 @@  fpmcu_boot0: fpmcu-boot0-state {
 	h1_ap_int_odl: h1-ap-int-odl-state {
 		pins = "gpio42";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -1335,7 +1331,6 @@  pen_rst_odl: pen-rst-odl-state {
 	p_sensor_int_l: p-sensor-int-l-state {
 		pins = "gpio24";
 		function = "gpio";
-		input-enable;
 
 		/* Has external pullup */
 		bias-disable;