| Message ID | 20230613065229.5619-2-quic_ptalari@quicinc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 59bbe86bb212b618ec2b50434f54bb4cfc704f44 |
| Headers | show |
| Series | spi-geni-qcom: Add SPI SLAVE mode support for GENI based QuPv3 | expand |
> -----Original Message----- > From: Praveen Talari (QUIC) > Sent: Tuesday, June 13, 2023 12:22 PM > To: agross@kernel.org; andersson@kernel.org; konrad.dybcio@linaro.org; > broonie@kernel.org; linux-arm-msm@vger.kernel.org; linux- > spi@vger.kernel.org; linux-kernel@vger.kernel.org > Cc: Mukesh Savaliya (QUIC) <quic_msavaliy@quicinc.com>; Visweswara > Tanuku (QUIC) <quic_vtanuku@quicinc.com>; Vijaya Krishna Nivarthi (Temp) > (QUIC) <quic_vnivarth@quicinc.com>; Aniket RANDIVE (QUIC) > <quic_arandive@quicinc.com>; Praveen Talari (QUIC) > <quic_ptalari@quicinc.com> > Subject: [PATCH 1/2] soc: qcom: geni-se: Add SPI SLAVE mode support for > GENI based QuPv3 > > Add SPI SLAVE mode support for GENI based QuPv3. > > Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com> Looks good to me. Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> > --- > include/linux/soc/qcom/geni-se.h | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/include/linux/soc/qcom/geni-se.h > b/include/linux/soc/qcom/geni-se.h > index 821a19135bb6..29e06905bc1f 100644 > --- a/include/linux/soc/qcom/geni-se.h > +++ b/include/linux/soc/qcom/geni-se.h > @@ -35,6 +35,7 @@ enum geni_se_protocol_type { > GENI_SE_UART, > GENI_SE_I2C, > GENI_SE_I3C, > + GENI_SE_SPI_SLAVE, > }; > > struct geni_wrapper; > @@ -73,12 +74,14 @@ struct geni_se { > > /* Common SE registers */ > #define GENI_FORCE_DEFAULT_REG 0x20 > +#define GENI_OUTPUT_CTRL 0x24 > #define SE_GENI_STATUS 0x40 > #define GENI_SER_M_CLK_CFG 0x48 > #define GENI_SER_S_CLK_CFG 0x4c > #define GENI_IF_DISABLE_RO 0x64 > #define GENI_FW_REVISION_RO 0x68 > #define SE_GENI_CLK_SEL 0x7c > +#define SE_GENI_CFG_SEQ_START 0x84 > #define SE_GENI_DMA_MODE_EN 0x258 > #define SE_GENI_M_CMD0 0x600 > #define SE_GENI_M_CMD_CTRL_REG 0x604 > @@ -111,6 +114,9 @@ struct geni_se { > /* GENI_FORCE_DEFAULT_REG fields */ > #define FORCE_DEFAULT BIT(0) > > +/* GENI_OUTPUT_CTRL fields */ > +#define GENI_IO_MUX_0_EN BIT(0) > + > /* GENI_STATUS fields */ > #define M_GENI_CMD_ACTIVE BIT(0) > #define S_GENI_CMD_ACTIVE BIT(12) > @@ -130,6 +136,9 @@ struct geni_se { > /* GENI_CLK_SEL fields */ > #define CLK_SEL_MSK GENMASK(2, 0) > > +/* SE_GENI_CFG_SEQ_START fields */ > +#define START_TRIGGER BIT(0) > + > /* SE_GENI_DMA_MODE_EN */ > #define GENI_DMA_MODE_EN BIT(0) > > -- > 2.17.1
diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h index 821a19135bb6..29e06905bc1f 100644 --- a/include/linux/soc/qcom/geni-se.h +++ b/include/linux/soc/qcom/geni-se.h @@ -35,6 +35,7 @@ enum geni_se_protocol_type { GENI_SE_UART, GENI_SE_I2C, GENI_SE_I3C, + GENI_SE_SPI_SLAVE, }; struct geni_wrapper; @@ -73,12 +74,14 @@ struct geni_se { /* Common SE registers */ #define GENI_FORCE_DEFAULT_REG 0x20 +#define GENI_OUTPUT_CTRL 0x24 #define SE_GENI_STATUS 0x40 #define GENI_SER_M_CLK_CFG 0x48 #define GENI_SER_S_CLK_CFG 0x4c #define GENI_IF_DISABLE_RO 0x64 #define GENI_FW_REVISION_RO 0x68 #define SE_GENI_CLK_SEL 0x7c +#define SE_GENI_CFG_SEQ_START 0x84 #define SE_GENI_DMA_MODE_EN 0x258 #define SE_GENI_M_CMD0 0x600 #define SE_GENI_M_CMD_CTRL_REG 0x604 @@ -111,6 +114,9 @@ struct geni_se { /* GENI_FORCE_DEFAULT_REG fields */ #define FORCE_DEFAULT BIT(0) +/* GENI_OUTPUT_CTRL fields */ +#define GENI_IO_MUX_0_EN BIT(0) + /* GENI_STATUS fields */ #define M_GENI_CMD_ACTIVE BIT(0) #define S_GENI_CMD_ACTIVE BIT(12) @@ -130,6 +136,9 @@ struct geni_se { /* GENI_CLK_SEL fields */ #define CLK_SEL_MSK GENMASK(2, 0) +/* SE_GENI_CFG_SEQ_START fields */ +#define START_TRIGGER BIT(0) + /* SE_GENI_DMA_MODE_EN */ #define GENI_DMA_MODE_EN BIT(0)
Add SPI SLAVE mode support for GENI based QuPv3. Signed-off-by: Praveen Talari <quic_ptalari@quicinc.com> --- include/linux/soc/qcom/geni-se.h | 9 +++++++++ 1 file changed, 9 insertions(+)