| Message ID | 20230703-topic-8250_qup_icc-v1-3-fea39aa07525@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add interconnects to QUPs on SM8250 | expand |
On 03/07/2023 15:31, Konrad Dybcio wrote: > Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path. > Allow such case. > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Mon, 03 Jul 2023 15:31:12 +0200, Konrad Dybcio wrote: > Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path. > Allow such case. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > .../bindings/i2c/qcom,i2c-geni-qcom.yaml | 27 +++++++++++++++------- > 1 file changed, 19 insertions(+), 8 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: geniqup@8c0000: i2c@a94000: More than one condition true in oneOf schema: {'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True}, 'properties': {'$nodename': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'interconnect-names': {'items': [{'const': 'qup-config'}, {'const': 'qup-memory'}], 'maxItems': 2, 'minItems': 2, 'type': 'array'}, 'interconnects': {'maxItems': 2, 'minItems': 2}, 'phandle': True, 'pinctrl-names': True, 'secure-status': True, 'status': True}}, {'patternProperties': {'pinctrl-[0-9]+': True}, 'properties': {'$nodename': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'interconnect-names': {'items': [{'const': 'qup-core'}, {'const': 'qup-config'}, {'const': 'qup-memory'}], 'maxItems': 3, 'minItems': 3, 'type': 'array'}, 'interconnects': {'maxItems': 3, 'minItems': 3}, 'phandle': True, 'pinctrl-names': True, 'secure-status': True, 'status': True}}], 'properties': {'clock-names': {'items': [{'const': 'se'}], 'maxItems': 1, 'minItems': 1, 'type': 'array'}, 'clocks': {'maxItems': 1, 'minItems': 1}}} from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: i2c@a94000: More than one condition true in oneOf schema: {'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True}, 'properties': {'$nodename': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'interconnect-names': {'items': [{'const': 'qup-config'}, {'const': 'qup-memory'}], 'maxItems': 2, 'minItems': 2, 'type': 'array'}, 'interconnects': {'maxItems': 2, 'minItems': 2}, 'phandle': True, 'pinctrl-names': True, 'secure-status': True, 'status': True}}, {'patternProperties': {'pinctrl-[0-9]+': True}, 'properties': {'$nodename': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'interconnect-names': {'items': [{'const': 'qup-core'}, {'const': 'qup-config'}, {'const': 'qup-memory'}], 'maxItems': 3, 'minItems': 3, 'type': 'array'}, 'interconnects': {'maxItems': 3, 'minItems': 3}, 'phandle': True, 'pinctrl-names': True, 'secure-status': True, 'status': True}}], 'properties': {'clock-names': {'items': [{'const': 'se'}], 'maxItems': 1, 'minItems': 1, 'type': 'array'}, 'clocks': {'maxItems': 1, 'minItems': 1}}} from schema $id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230703-topic-8250_qup_icc-v1-3-fea39aa07525@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 03/07/2023 16:36, Krzysztof Kozlowski wrote: > On 03/07/2023 15:31, Konrad Dybcio wrote: >> Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path. >> Allow such case. >> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Un-reviewed. Don't define properties in oneOf, instead use the syntax I pointed out in other patch. If you remove interconnects from this example, you will reproduce the error. This should be something like: interconnects: minItems: 2 maxItems: 3 interconnect-names: oneOf: - items: - const: qup-config - const: qup-memory - items: - const: qup-core - const: qup-config - const: qup-memory Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml index 9f66a3bb1f80..f92b6d7fc7c5 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml @@ -108,14 +108,25 @@ allOf: clock-names: const: se - interconnects: - minItems: 3 - - interconnect-names: - items: - - const: qup-core - - const: qup-config - - const: qup-memory + oneOf: + - properties: + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: qup-config + - const: qup-memory + + - properties: + interconnects: + minItems: 3 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + - const: qup-memory unevaluatedProperties: false
Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path. Allow such case. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../bindings/i2c/qcom,i2c-geni-qcom.yaml | 27 +++++++++++++++------- 1 file changed, 19 insertions(+), 8 deletions(-)