diff mbox series

[-next,15/24] spi: rspi: switch to use modern name

Message ID 20230816094013.1275068-16-yangyingliang@huawei.com (mailing list archive)
State Superseded
Headers show
Series spi: switch to use modern name (part4) | expand

Commit Message

Yang Yingliang Aug. 16, 2023, 9:40 a.m. UTC
Change legacy name master/slave to modern name host/target.

No functional changed.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/spi/spi-rspi.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Geert Uytterhoeven Aug. 16, 2023, 10:34 a.m. UTC | #1
Hi Yang,

On Wed, Aug 16, 2023 at 11:43 AM Yang Yingliang
<yangyingliang@huawei.com> wrote:
> Change legacy name master/slave to modern name host/target.
>
> No functional changed.
>
> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>

Thanks for your patch!

> --- a/drivers/spi/spi-rspi.c
> +++ b/drivers/spi/spi-rspi.c
> @@ -71,7 +71,7 @@
>  #define SPCR_SPE               0x40    /* Function Enable */
>  #define SPCR_SPTIE             0x20    /* Transmit Interrupt Enable */
>  #define SPCR_SPEIE             0x10    /* Error Interrupt Enable */
> -#define SPCR_MSTR              0x08    /* Master/Slave Mode Select */
> +#define SPCR_MSTR              0x08    /* Host/Target Mode Select */

Please do not change this register bit definition nor the comment, as
they match Rev 2.00 of the R-Car Series, 2nd Generation, and Rev. 1.30
of the RZ/G2L{,C} Group Hardware User's Manual.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 83bb16995e06..365434a448e4 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -71,7 +71,7 @@ 
 #define SPCR_SPE		0x40	/* Function Enable */
 #define SPCR_SPTIE		0x20	/* Transmit Interrupt Enable */
 #define SPCR_SPEIE		0x10	/* Error Interrupt Enable */
-#define SPCR_MSTR		0x08	/* Master/Slave Mode Select */
+#define SPCR_MSTR		0x08	/* Host/Target Mode Select */
 #define SPCR_MODFEN		0x04	/* Mode Fault Error Detection Enable */
 /* RSPI on SH only */
 #define SPCR_TXMD		0x02	/* TX Only Mode (vs. Full Duplex) */
@@ -1000,7 +1000,7 @@  static int rspi_prepare_message(struct spi_controller *ctlr,
 	if (spi->mode & SPI_LSB_FIRST)
 		rspi->spcmd |= SPCMD_LSBF;
 
-	/* Configure slave signal to assert */
+	/* Configure target signal to assert */
 	rspi->spcmd |= SPCMD_SSLA(spi_get_csgpiod(spi, 0) ? rspi->ctlr->unused_native_cs
 						: spi_get_chipselect(spi, 0));
 
@@ -1019,7 +1019,7 @@  static int rspi_prepare_message(struct spi_controller *ctlr,
 			return ret;
 	}
 
-	/* Enable SPI function in master mode */
+	/* Enable SPI function in host mode */
 	rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR);
 	return 0;
 }
@@ -1135,7 +1135,7 @@  static int rspi_request_dma(struct device *dev, struct spi_controller *ctlr,
 	unsigned int dma_tx_id, dma_rx_id;
 
 	if (dev->of_node) {
-		/* In the OF case we will get the slave IDs from the DT */
+		/* In the OF case we will get the target IDs from the DT */
 		dma_tx_id = 0;
 		dma_rx_id = 0;
 	} else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) {
@@ -1294,7 +1294,7 @@  static int rspi_probe(struct platform_device *pdev)
 	const struct spi_ops *ops;
 	unsigned long clksrc;
 
-	ctlr = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
+	ctlr = spi_alloc_host(&pdev->dev, sizeof(struct rspi_data));
 	if (ctlr == NULL)
 		return -ENOMEM;