Message ID | 20240329194849.25554-2-wsadowski@marvell.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | Support for Cadence xSPI Marvell modifications | expand |
On Fri, 29 Mar 2024 12:48:45 -0700, Witold Sadowski wrote: > Add new bindings: > - mrvl,xspi-nor compatible string > Compatible string to enable Marvell XSPI modification > - Multiple PHY configuration registers > - base for xfer register set > > Signed-off-by: Witold Sadowski <wsadowski@marvell.com> > --- > .../devicetree/bindings/spi/cdns,xspi.yaml | 84 ++++++++++++++++++- > 1 file changed, 83 insertions(+), 1 deletion(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: ignoring, error in schema: properties: compatible Error: Documentation/devicetree/bindings/spi/cdns,xspi.example.dts:88.23-24 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/spi/cdns,xspi.example.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2 make: *** [Makefile:240: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240329194849.25554-2-wsadowski@marvell.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 29/03/2024 20:48, Witold Sadowski wrote: > Add new bindings: > - mrvl,xspi-nor compatible string > Compatible string to enable Marvell XSPI modification > - Multiple PHY configuration registers > - base for xfer register set > > Signed-off-by: Witold Sadowski <wsadowski@marvell.com> Please use subject prefixes matching the subsystem. You can get them for example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory your patch is touching. > --- > .../devicetree/bindings/spi/cdns,xspi.yaml | 84 ++++++++++++++++++- > 1 file changed, 83 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml > index eb0f92468185..d1fde8d4e9b8 100644 > --- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml > +++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml > @@ -20,23 +20,74 @@ allOf: > > properties: > compatible: > - const: cdns,xspi-nor > + - const: cdns,xspi-nor > + - const: mrvl,xspi-nor It does not look like you tested the bindings, at least after quick look. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Maybe you need to update your dtschema and yamllint. There is a lot of things happening here, but I won't perform review if the code was never tested. Sorry, please test before sending. Best regards, Krzysztof
Hi Witold, kernel test robot noticed the following build warnings: [auto build test WARNING on broonie-spi/for-next] [also build test WARNING on linus/master v6.9-rc1 next-20240328] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Witold-Sadowski/spi-cadence-Add-new-bindings-documentation-for-Cadence-XSPI/20240330-035124 base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next patch link: https://lore.kernel.org/r/20240329194849.25554-2-wsadowski%40marvell.com patch subject: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI compiler: loongarch64-linux-gcc (GCC) 13.2.0 reproduce: (https://download.01.org/0day-ci/archive/20240331/202403311827.DCvAFLcu-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202403311827.DCvAFLcu-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) >> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean' from schema $id: http://json-schema.org/draft-07/schema# >> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean' from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# -- >> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: ignoring, error in schema: properties: compatible Documentation/devicetree/bindings/net/snps,dwmac.yaml: mac-mode: missing type definition
On 30/03/2024 12:32, Krzysztof Kozlowski wrote: ... >> >> properties: >> compatible: >> - const: cdns,xspi-nor >> + - const: cdns,xspi-nor >> + - const: mrvl,xspi-nor > > It does not look like you tested the bindings, at least after quick > look. Please run `make dt_binding_check` (see > Documentation/devicetree/bindings/writing-schema.rst for instructions). > Maybe you need to update your dtschema and yamllint. > > There is a lot of things happening here, but I won't perform review if > the code was never tested. Sorry, please test before sending. Hi, You did not address any of the comments and build issues neither here nor in previous mailings. Starting from 2022, all previous comments look ignored and then after some time you send another v1 expecting us to do review of the same code with the same issues. I gave it 1 month for some sort of response from you. None came. Therefore let's be clear: I will automatically NAK any further version you send, based on assumption you ignored entire existing feedback. Before sending any new patches for this XSPI, please first respond to numerous emails you already got (from the last two years). That's way we will know that reviewer's feedback is being addressed. Thank you for understanding. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml index eb0f92468185..d1fde8d4e9b8 100644 --- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml @@ -20,23 +20,74 @@ allOf: properties: compatible: - const: cdns,xspi-nor + - const: cdns,xspi-nor + - const: mrvl,xspi-nor reg: items: - description: address and length of the controller register set - description: address and length of the Slave DMA data port - description: address and length of the auxiliary registers + - description: address and length of the xfer registers reg-names: items: - const: io - const: sdma - const: aux + - const: xferbase interrupts: maxItems: 1 + cdns,dll-phy-control: + description: | + PHY config register. Valid only for cdns,mrvl-xspi-nor + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x707 + + cdns,rfile-phy-control: + description: | + PHY config register. Valid only for cdns,mrvl-xspi-nor + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x40000 + + cdns,rfile-phy-tsel: + description: | + PHY config register. Valid only for cdns,mrvl-xspi-nor + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + cdns,phy-dq-timing: + description: | + PHY config register. Valid only for cdns,mrvl-xspi-nor + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x101 + + cdns,phy-dqs-timing: + description: | + PHY config register. Valid only for cdns,mrvl-xspi-nor + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x700404 + + cdns,phy-gate-lpbk-ctrl: + description: | + PHY config register. Valid only for cdns,mrvl-xspi-nor + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x200030 + + cdns,phy-dll-master-ctrl: + description: | + PHY config register. Valid only for cdns,mrvl-xspi-nor + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x00800000 + + cdns,phy-dll-slave-ctrl: + description: | + PHY config register. Valid only for cdns,mrvl-xspi-nor + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x0000ff01 + required: - compatible - reg @@ -68,6 +119,37 @@ examples: reg = <0>; }; + flash@1 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <75000000>; + reg = <1>; + }; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + xspi: spi@a0010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mrvl,xspi-nor"; + reg = <0x0 0xa0010000 0x0 0x1040>, + <0x0 0xb0000000 0x0 0x1000>, + <0x0 0xa0020000 0x0 0x100>; + <0x0 0xa0090000 0x0 0x100>; + reg-names = "io", "sdma", "aux", "xferbase"; + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <75000000>; + reg = <0>; + }; + flash@1 { compatible = "jedec,spi-nor"; spi-max-frequency = <75000000>;
Add new bindings: - mrvl,xspi-nor compatible string Compatible string to enable Marvell XSPI modification - Multiple PHY configuration registers - base for xfer register set Signed-off-by: Witold Sadowski <wsadowski@marvell.com> --- .../devicetree/bindings/spi/cdns,xspi.yaml | 84 ++++++++++++++++++- 1 file changed, 83 insertions(+), 1 deletion(-)