diff mbox series

[v6,1/4] gpio: swnode: Add ability to specify native chip selects for SPI

Message ID 20240415140925.3518990-2-ckeepax@opensource.cirrus.com (mailing list archive)
State Superseded
Headers show
Series Add bridged amplifiers to cs42l43 | expand

Commit Message

Charles Keepax April 15, 2024, 2:09 p.m. UTC
SPI devices can specify a cs-gpios property to enumerate their
chip selects. Under device tree, a zero entry in this property can
be used to specify that a particular chip select is using the SPI
controllers native chip select, for example:

        cs-gpios = <&gpio1 0 0>, <0>;

Here, the second chip select is native. However, when using swnodes
there is currently no way to specify a native chip select. The
proposal here is to register a swnode_gpio_undefined software node,
that can be specified to allow the indication of a native chip
select. For example:

static const struct software_node_ref_args device_cs_refs[] = {
	{
		.node  = &device_gpiochip_swnode,
		.nargs = 2,
		.args  = { 0, GPIO_ACTIVE_LOW },
	},
	{
		.node  = &swnode_gpio_undefined,
		.nargs = 0,
	},
};

Register the swnode as the gpiolib is initialised and check in
swnode_get_gpio_device() if the returned node matches
swnode_gpio_undefined and return -ENOENT, which matches the
behaviour of the device tree system when it encounters a 0 phandle.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

Series changes since v5:
 - Add back help for GPIO_SWNODE_UNDEFINED
 - Correct some typos
 - Only check for undefined swnode if the Kconfig is set
 - Add a pr_fmt
 - Move swnode_gpio_undefined to include/linux/gpio/property.h

Thanks,
Charles

 drivers/gpio/Kconfig          |  9 +++++++
 drivers/gpio/gpiolib-swnode.c | 44 +++++++++++++++++++++++++++++++++++
 include/linux/gpio/property.h |  4 ++++
 3 files changed, 57 insertions(+)

Comments

Andy Shevchenko April 15, 2024, 4:05 p.m. UTC | #1
On Mon, Apr 15, 2024 at 5:09 PM Charles Keepax
<ckeepax@opensource.cirrus.com> wrote:
>
> SPI devices can specify a cs-gpios property to enumerate their
> chip selects. Under device tree, a zero entry in this property can
> be used to specify that a particular chip select is using the SPI
> controllers native chip select, for example:
>
>         cs-gpios = <&gpio1 0 0>, <0>;
>
> Here, the second chip select is native. However, when using swnodes
> there is currently no way to specify a native chip select. The
> proposal here is to register a swnode_gpio_undefined software node,
> that can be specified to allow the indication of a native chip
> select. For example:
>
> static const struct software_node_ref_args device_cs_refs[] = {
>         {
>                 .node  = &device_gpiochip_swnode,
>                 .nargs = 2,
>                 .args  = { 0, GPIO_ACTIVE_LOW },
>         },
>         {
>                 .node  = &swnode_gpio_undefined,
>                 .nargs = 0,
>         },
> };
>
> Register the swnode as the gpiolib is initialised and check in
> swnode_get_gpio_device() if the returned node matches
> swnode_gpio_undefined and return -ENOENT, which matches the
> behaviour of the device tree system when it encounters a 0 phandle.

FWIW,
Reviewed-by: Andy Shevchenko <andy@kernel.org>
(I assume that this is _not_ going to be applied standalone as we
don't want this without users, i.o.w. all or none as per this series)
Bartosz Golaszewski April 16, 2024, 9:09 p.m. UTC | #2
On Mon, Apr 15, 2024 at 4:09 PM Charles Keepax
<ckeepax@opensource.cirrus.com> wrote:
>
> SPI devices can specify a cs-gpios property to enumerate their
> chip selects. Under device tree, a zero entry in this property can
> be used to specify that a particular chip select is using the SPI
> controllers native chip select, for example:
>
>         cs-gpios = <&gpio1 0 0>, <0>;
>
> Here, the second chip select is native. However, when using swnodes
> there is currently no way to specify a native chip select. The
> proposal here is to register a swnode_gpio_undefined software node,
> that can be specified to allow the indication of a native chip
> select. For example:
>
> static const struct software_node_ref_args device_cs_refs[] = {
>         {
>                 .node  = &device_gpiochip_swnode,
>                 .nargs = 2,
>                 .args  = { 0, GPIO_ACTIVE_LOW },
>         },
>         {
>                 .node  = &swnode_gpio_undefined,
>                 .nargs = 0,
>         },
> };
>
> Register the swnode as the gpiolib is initialised and check in
> swnode_get_gpio_device() if the returned node matches
> swnode_gpio_undefined and return -ENOENT, which matches the
> behaviour of the device tree system when it encounters a 0 phandle.
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
>

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
diff mbox series

Patch

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b50d0b470849..00b5c007a2bb 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -103,6 +103,15 @@  config GPIO_REGMAP
 	select REGMAP
 	tristate
 
+config GPIO_SWNODE_UNDEFINED
+	bool
+	help
+	  This adds a special place holder for software nodes to contain an
+	  undefined GPIO reference, this is primarily used by SPI to allow a
+	  list of GPIO chip selects to mark a certain chip select as being
+	  controlled the SPI device's internal chip select mechanism and not
+	  a GPIO.
+
 # put drivers in the right section, in alphabetical order
 
 # This symbol is selected by both I2C and SPI expanders
diff --git a/drivers/gpio/gpiolib-swnode.c b/drivers/gpio/gpiolib-swnode.c
index fa52bdb1a29a..cec1ab878af8 100644
--- a/drivers/gpio/gpiolib-swnode.c
+++ b/drivers/gpio/gpiolib-swnode.c
@@ -4,8 +4,13 @@ 
  *
  * Copyright 2022 Google LLC
  */
+
+#define pr_fmt(fmt) "gpiolib: swnode: " fmt
+
 #include <linux/err.h>
 #include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/printk.h>
 #include <linux/property.h>
@@ -17,6 +22,8 @@ 
 #include "gpiolib.h"
 #include "gpiolib-swnode.h"
 
+#define GPIOLIB_SWNODE_UNDEFINED_NAME "swnode-gpio-undefined"
+
 static void swnode_format_propname(const char *con_id, char *propname,
 				   size_t max_size)
 {
@@ -40,6 +47,14 @@  static struct gpio_device *swnode_get_gpio_device(struct fwnode_handle *fwnode)
 	if (!gdev_node || !gdev_node->name)
 		return ERR_PTR(-EINVAL);
 
+	/*
+	 * Check for a special node that identifies undefined GPIOs, this is
+	 * primarily used as a key for internal chip selects in SPI bindings.
+	 */
+	if (IS_ENABLED(CONFIG_GPIO_SWNODE_UNDEFINED) &&
+	    !strcmp(gdev_node->name, GPIOLIB_SWNODE_UNDEFINED_NAME))
+		return ERR_PTR(-ENOENT);
+
 	gdev = gpio_device_find_by_label(gdev_node->name);
 	return gdev ?: ERR_PTR(-EPROBE_DEFER);
 }
@@ -121,3 +136,32 @@  int swnode_gpio_count(const struct fwnode_handle *fwnode, const char *con_id)
 
 	return count ?: -ENOENT;
 }
+
+#if IS_ENABLED(CONFIG_GPIO_SWNODE_UNDEFINED)
+/*
+ * A special node that identifies undefined GPIOs, this is primarily used as
+ * a key for internal chip selects in SPI bindings.
+ */
+const struct software_node swnode_gpio_undefined = {
+	.name = GPIOLIB_SWNODE_UNDEFINED_NAME,
+};
+EXPORT_SYMBOL_NS_GPL(swnode_gpio_undefined, GPIO_SWNODE);
+
+static int __init swnode_gpio_init(void)
+{
+	int ret;
+
+	ret = software_node_register(&swnode_gpio_undefined);
+	if (ret < 0)
+		pr_err("failed to register swnode: %d\n", ret);
+
+	return ret;
+}
+subsys_initcall(swnode_gpio_init);
+
+static void __exit swnode_gpio_cleanup(void)
+{
+	software_node_unregister(&swnode_gpio_undefined);
+}
+__exitcall(swnode_gpio_cleanup);
+#endif
diff --git a/include/linux/gpio/property.h b/include/linux/gpio/property.h
index 6c75c8bd44a0..832a60c2e0b9 100644
--- a/include/linux/gpio/property.h
+++ b/include/linux/gpio/property.h
@@ -5,7 +5,11 @@ 
 #include <dt-bindings/gpio/gpio.h> /* for GPIO_* flags */
 #include <linux/property.h>
 
+struct software_node;
+
 #define PROPERTY_ENTRY_GPIO(_name_, _chip_node_, _idx_, _flags_) \
 	PROPERTY_ENTRY_REF(_name_, _chip_node_, _idx_, _flags_)
 
+extern const struct software_node swnode_gpio_undefined;
+
 #endif /* __LINUX_GPIO_PROPERTY_H */