diff mbox series

[v3,4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI

Message ID 20240418011353.1764672-5-wsadowski@marvell.com (mailing list archive)
State New
Headers show
Series Marvell HW overlay support for Cadence xSPI | expand

Commit Message

Witold Sadowski April 18, 2024, 1:13 a.m. UTC
From: Piyush Malgujar <pmalgujar@marvell.com>

These changes enables to read the configs from ACPI tables as required
for successful probing in ACPI uefi environment.
In case of ACPI disabled/dts based environment, it will continue to
read configs from dts as before

Signed-off-by: Piyush Malgujar <pmalgujar@marvell.com>
Signed-off-by: Witold Sadowski <wsadowski@marvell.com>
---
 drivers/spi/spi-cadence-xspi.c | 97 +++++++++++++++++++++++++++++++---
 1 file changed, 90 insertions(+), 7 deletions(-)

Comments

Krzysztof Kozlowski April 18, 2024, 5:51 p.m. UTC | #1
On 18/04/2024 03:13, Witold Sadowski wrote:
> From: Piyush Malgujar <pmalgujar@marvell.com>
> 
> These changes enables to read the configs from ACPI tables as required
> for successful probing in ACPI uefi environment.
> In case of ACPI disabled/dts based environment, it will continue to
> read configs from dts as before
> 

...

>  	}
> @@ -924,6 +989,21 @@ static int cdns_xspi_probe(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id cdns_xspi_acpi_match[] = {
> +	{
> +		.id = "cdns,xspi-nor",
> +		.driver_data = (kernel_ulong_t) &cdns_driver_data,
> +	},
> +	{
> +		.id = "mrvl,xspi-nor",
> +		.driver_data = (kernel_ulong_t) &mrvl_driver_data,

UEFI provides compatibles for ACPI? I think that's first such format in
the kernel.

Best regards,
Krzysztof
Witold Sadowski April 29, 2024, 2:30 p.m. UTC | #2
> On 18/04/2024 03:13, Witold Sadowski wrote:
> > From: Piyush Malgujar <pmalgujar@marvell.com>
> >
> > These changes enables to read the configs from ACPI tables as required
> > for successful probing in ACPI uefi environment.
> > In case of ACPI disabled/dts based environment, it will continue to
> > read configs from dts as before
> >
> 
> ...
> 
> >  	}
> > @@ -924,6 +989,21 @@ static int cdns_xspi_probe(struct platform_device
> *pdev)
> >  	return 0;
> >  }
> >
> > +#ifdef CONFIG_ACPI
> > +static const struct acpi_device_id cdns_xspi_acpi_match[] = {
> > +	{
> > +		.id = "cdns,xspi-nor",
> > +		.driver_data = (kernel_ulong_t) &cdns_driver_data,
> > +	},
> > +	{
> > +		.id = "mrvl,xspi-nor",
> > +		.driver_data = (kernel_ulong_t) &mrvl_driver_data,
> 
> UEFI provides compatibles for ACPI? I think that's first such format in
> the kernel.

Yes, that code is not doing what was expected.
Current usage scenario in ACPI mode is:
xSPI block with HID PRP0001, and additional compatible package set to
correct compatible string
With that approach only issue(in ACPI mode) is with matching device
with data field from of_device_id. It looks like there are functions
to match that when DTB is used, but in ACPI mode it fails.
I believe solution is to traverse dev->driver->of_match_table manually
To match device name with correct compatible data structure.
That will be included in next patchset.

> 
> Best regards,
> Krzysztof

Regards
Witek
Krzysztof Kozlowski April 30, 2024, 8 a.m. UTC | #3
On 29/04/2024 16:30, Witold Sadowski wrote:
>>>
>>> +#ifdef CONFIG_ACPI
>>> +static const struct acpi_device_id cdns_xspi_acpi_match[] = {
>>> +	{
>>> +		.id = "cdns,xspi-nor",
>>> +		.driver_data = (kernel_ulong_t) &cdns_driver_data,
>>> +	},
>>> +	{
>>> +		.id = "mrvl,xspi-nor",
>>> +		.driver_data = (kernel_ulong_t) &mrvl_driver_data,
>>
>> UEFI provides compatibles for ACPI? I think that's first such format in
>> the kernel.
> 
> Yes, that code is not doing what was expected.
> Current usage scenario in ACPI mode is:
> xSPI block with HID PRP0001, and additional compatible package set to
> correct compatible string
> With that approach only issue(in ACPI mode) is with matching device
> with data field from of_device_id. It looks like there are functions
> to match that when DTB is used, but in ACPI mode it fails.
> I believe solution is to traverse dev->driver->of_match_table manually
> To match device name with correct compatible data structure.
> That will be included in next patchset.

PRP0001 should be handled by regular of_device_id table, of course
assuming your kernel has build-in CONFIG_OF.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/spi/spi-cadence-xspi.c b/drivers/spi/spi-cadence-xspi.c
index 5d36f9177f3c..e4ebfad8a1cb 100644
--- a/drivers/spi/spi-cadence-xspi.c
+++ b/drivers/spi/spi-cadence-xspi.c
@@ -2,6 +2,7 @@ 
 // Cadence XSPI flash controller driver
 // Copyright (C) 2020-21 Cadence
 
+#include <linux/acpi.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -14,6 +15,7 @@ 
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi-mem.h>
 #include <linux/bitfield.h>
@@ -700,6 +702,67 @@  static int cdns_xspi_mem_op(struct cdns_xspi_dev *cdns_xspi,
 					   (dir != SPI_MEM_NO_DATA));
 }
 
+#ifdef CONFIG_ACPI
+static bool cdns_xspi_supports_op(struct spi_mem *mem,
+				  const struct spi_mem_op *op)
+{
+	struct spi_device *spi = mem->spi;
+	const union acpi_object *obj;
+	struct acpi_device *adev;
+
+	adev = ACPI_COMPANION(&spi->dev);
+
+	if (!acpi_dev_get_property(adev, "spi-tx-bus-width", ACPI_TYPE_INTEGER,
+				   &obj)) {
+		switch (obj->integer.value) {
+		case 1:
+			break;
+		case 2:
+			spi->mode |= SPI_TX_DUAL;
+			break;
+		case 4:
+			spi->mode |= SPI_TX_QUAD;
+			break;
+		case 8:
+			spi->mode |= SPI_TX_OCTAL;
+			break;
+		default:
+			dev_warn(&spi->dev,
+				 "spi-tx-bus-width %lld not supported\n",
+				 obj->integer.value);
+			break;
+		}
+	}
+
+	if (!acpi_dev_get_property(adev, "spi-rx-bus-width", ACPI_TYPE_INTEGER,
+				   &obj)) {
+		switch (obj->integer.value) {
+		case 1:
+			break;
+		case 2:
+			spi->mode |= SPI_RX_DUAL;
+			break;
+		case 4:
+			spi->mode |= SPI_RX_QUAD;
+			break;
+		case 8:
+			spi->mode |= SPI_RX_OCTAL;
+			break;
+		default:
+			dev_warn(&spi->dev,
+				 "spi-rx-bus-width %lld not supported\n",
+				 obj->integer.value);
+			break;
+		}
+	}
+
+	if (!spi_mem_default_supports_op(mem, op))
+		return false;
+
+	return true;
+}
+#endif
+
 static int cdns_xspi_mem_op_execute(struct spi_mem *mem,
 				    const struct spi_mem_op *op)
 {
@@ -723,6 +786,9 @@  static int cdns_xspi_adjust_mem_op_size(struct spi_mem *mem, struct spi_mem_op *
 }
 
 static const struct spi_controller_mem_ops cadence_xspi_mem_ops = {
+#ifdef CONFIG_ACPI
+	.supports_op = cdns_xspi_supports_op,
+#endif
 	.exec_op = cdns_xspi_mem_op_execute,
 	.adjust_op_size = cdns_xspi_adjust_mem_op_size,
 };
@@ -774,21 +840,20 @@  static irqreturn_t cdns_xspi_irq_handler(int this_irq, void *dev)
 
 static int cdns_xspi_of_get_plat_data(struct platform_device *pdev)
 {
-	struct device_node *node_prop = pdev->dev.of_node;
-	struct device_node *node_child;
+	struct fwnode_handle *fwnode_child;
 	unsigned int cs;
 
-	for_each_child_of_node(node_prop, node_child) {
-		if (!of_device_is_available(node_child))
+	device_for_each_child_node(&pdev->dev, fwnode_child) {
+		if (!fwnode_device_is_available(fwnode_child))
 			continue;
 
-		if (of_property_read_u32(node_child, "reg", &cs)) {
+		if (fwnode_property_read_u32(fwnode_child, "reg", &cs)) {
 			dev_err(&pdev->dev, "Couldn't get memory chip select\n");
-			of_node_put(node_child);
+			fwnode_handle_put(fwnode_child);
 			return -ENXIO;
 		} else if (cs >= CDNS_XSPI_MAX_BANKS) {
 			dev_err(&pdev->dev, "reg (cs) parameter value too large\n");
-			of_node_put(node_child);
+			fwnode_handle_put(fwnode_child);
 			return -ENXIO;
 		}
 	}
@@ -924,6 +989,21 @@  static int cdns_xspi_probe(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id cdns_xspi_acpi_match[] = {
+	{
+		.id = "cdns,xspi-nor",
+		.driver_data = (kernel_ulong_t) &cdns_driver_data,
+	},
+	{
+		.id = "mrvl,xspi-nor",
+		.driver_data = (kernel_ulong_t) &mrvl_driver_data,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, cdns_xspi_acpi_match);
+#endif
+
 static const struct of_device_id cdns_xspi_of_match[] = {
 	{
 		.compatible = "cdns,xspi-nor",
@@ -942,6 +1022,9 @@  static struct platform_driver cdns_xspi_platform_driver = {
 	.driver = {
 		.name = CDNS_XSPI_NAME,
 		.of_match_table = cdns_xspi_of_match,
+#ifdef CONFIG_ACPI
+		.acpi_match_table = cdns_xspi_acpi_match,
+#endif
 	},
 };