diff mbox series

[v4,15/40] fsi: aspeed: Use common initialization and link enable

Message ID 20240605212312.349188-16-eajames@linux.ibm.com (mailing list archive)
State New
Headers show
Series fsi: Add interrupt support | expand

Commit Message

Eddie James June 5, 2024, 9:22 p.m. UTC
Create a regmap for accessing the master registers over OPB
to use the new common master initialization and link enable procedures.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
Changes since v2:
 - Add AST2700 direct AHB access of master registers

 drivers/fsi/fsi-master-aspeed.c | 173 +++++++++++++-------------------
 1 file changed, 68 insertions(+), 105 deletions(-)
diff mbox series

Patch

diff --git a/drivers/fsi/fsi-master-aspeed.c b/drivers/fsi/fsi-master-aspeed.c
index 3d15e867237df..a67f185bb8814 100644
--- a/drivers/fsi/fsi-master-aspeed.c
+++ b/drivers/fsi/fsi-master-aspeed.c
@@ -27,6 +27,7 @@  struct fsi_master_aspeed {
 	struct mutex		lock;	/* protect HW access */
 	struct device		*dev;
 	void __iomem		*base;
+	void __iomem		*ctrl;
 	struct clk		*clk;
 	struct gpio_desc	*cfam_reset_gpio;
 };
@@ -95,14 +96,6 @@  static const u32 fsi_base = 0xa0000000;
 #define CREATE_TRACE_POINTS
 #include <trace/events/fsi_master_aspeed.h>
 
-#define FSI_LINK_ENABLE_SETUP_TIME	10	/* in mS */
-
-/* Run the bus at maximum speed by default */
-#define FSI_DIVISOR_DEFAULT            1
-#define FSI_DIVISOR_CABLED             2
-static u16 aspeed_fsi_divisor = FSI_DIVISOR_DEFAULT;
-module_param_named(bus_div,aspeed_fsi_divisor, ushort, 0);
-
 #define OPB_POLL_TIMEOUT		500
 
 static int __opb_write(struct fsi_master_aspeed *aspeed, u32 addr,
@@ -333,35 +326,6 @@  static int aspeed_master_write(struct fsi_master *master, int link,
 	return ret;
 }
 
-static int aspeed_master_link_enable(struct fsi_master *master, int link,
-				     bool enable)
-{
-	struct fsi_master_aspeed *aspeed = to_fsi_master_aspeed(master);
-	int idx, bit, ret;
-	__be32 reg;
-
-	idx = link / 32;
-	bit = link % 32;
-
-	reg = cpu_to_be32(0x80000000 >> bit);
-
-	mutex_lock(&aspeed->lock);
-
-	if (!enable) {
-		ret = opb_writel(aspeed, ctrl_base + FSI_MCENP0 + (4 * idx), reg);
-		goto done;
-	}
-
-	ret = opb_writel(aspeed, ctrl_base + FSI_MSENP0 + (4 * idx), reg);
-	if (ret)
-		goto done;
-
-	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-done:
-	mutex_unlock(&aspeed->lock);
-	return ret;
-}
-
 static int aspeed_master_term(struct fsi_master *master, int link, uint8_t id)
 {
 	uint32_t addr;
@@ -389,72 +353,54 @@  static void aspeed_master_release(struct device *dev)
 	struct fsi_master_aspeed *aspeed =
 		to_fsi_master_aspeed(to_fsi_master(dev));
 
+	regmap_exit(aspeed->master.map);
 	kfree(aspeed);
 }
 
-/* mmode encoders */
-static inline u32 fsi_mmode_crs0(u32 x)
+static int regmap_aspeed_opb_read(void *context, unsigned int reg, unsigned int *val)
 {
-	return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
-}
+	__be32 v;
+	int ret;
 
-static inline u32 fsi_mmode_crs1(u32 x)
-{
-	return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
+	ret = opb_readl(context, ctrl_base + reg, &v);
+	if (ret)
+		return ret;
+
+	*val = be32_to_cpu(v);
+	return 0;
 }
 
-static int aspeed_master_init(struct fsi_master_aspeed *aspeed)
+static int regmap_aspeed_opb_write(void *context, unsigned int reg, unsigned int val)
 {
-	__be32 reg;
-
-	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
-			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
-	opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
-
-	/* Initialize the MFSI (hub master) engine */
-	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
-			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
-	opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
-
-	reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
-	opb_writel(aspeed, ctrl_base + FSI_MECTRL, reg);
-
-	reg = cpu_to_be32(FSI_MMODE_ECRC | FSI_MMODE_EPC | FSI_MMODE_RELA
-			| fsi_mmode_crs0(aspeed_fsi_divisor)
-			| fsi_mmode_crs1(aspeed_fsi_divisor)
-			| FSI_MMODE_P8_TO_LSB);
-	dev_info(aspeed->dev, "mmode set to %08x (divisor %d)\n",
-			be32_to_cpu(reg), aspeed_fsi_divisor);
-	opb_writel(aspeed, ctrl_base + FSI_MMODE, reg);
-
-	reg = cpu_to_be32(0xffff0000);
-	opb_writel(aspeed, ctrl_base + FSI_MDLYR, reg);
-
-	reg = cpu_to_be32(~0);
-	opb_writel(aspeed, ctrl_base + FSI_MSENP0, reg);
-
-	/* Leave enabled long enough for master logic to set up */
-	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-
-	opb_writel(aspeed, ctrl_base + FSI_MCENP0, reg);
-
-	opb_readl(aspeed, ctrl_base + FSI_MAEB, NULL);
+	return opb_writel(context, ctrl_base + reg, cpu_to_be32(val));
+}
 
-	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
-	opb_writel(aspeed, ctrl_base + FSI_MRESP0, reg);
+static const struct regmap_bus regmap_aspeed_opb = {
+	.reg_write = regmap_aspeed_opb_write,
+	.reg_read = regmap_aspeed_opb_read,
+};
 
-	opb_readl(aspeed, ctrl_base + FSI_MLEVP0, NULL);
+static int regmap_ast2700_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct fsi_master_aspeed *aspeed = context;
 
-	/* Reset the master bridge */
-	reg = cpu_to_be32(FSI_MRESB_RST_GEN);
-	opb_writel(aspeed, ctrl_base + FSI_MRESB0, reg);
+	*val = readl(aspeed->ctrl + reg);
+	return 0;
+}
 
-	reg = cpu_to_be32(FSI_MRESB_RST_ERR);
-	opb_writel(aspeed, ctrl_base + FSI_MRESB0, reg);
+static int regmap_ast2700_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct fsi_master_aspeed *aspeed = context;
 
+	writel(val, aspeed->ctrl + reg);
 	return 0;
 }
 
+static const struct regmap_bus regmap_ast2700 = {
+	.reg_write = regmap_ast2700_write,
+	.reg_read = regmap_ast2700_read,
+};
+
 static ssize_t cfam_reset_store(struct device *dev, struct device_attribute *attr,
 				const char *buf, size_t count)
 {
@@ -466,7 +412,7 @@  static ssize_t cfam_reset_store(struct device *dev, struct device_attribute *att
 	usleep_range(900, 1000);
 	gpiod_set_value(aspeed->cfam_reset_gpio, 0);
 	usleep_range(900, 1000);
-	opb_writel(aspeed, ctrl_base + FSI_MRESP0, cpu_to_be32(FSI_MRESP_RST_ALL_MASTER));
+	regmap_write(aspeed->master.map, FSI_MRESP0, FSI_MRESP_RST_ALL_MASTER);
 	mutex_unlock(&aspeed->lock);
 	trace_fsi_master_aspeed_cfam_reset(false);
 
@@ -526,14 +472,6 @@  static int tacoma_cabled_fsi_fixup(struct device *dev)
 
 	/* If the routing GPIO is high we should set the mux to low. */
 	if (gpio) {
-		/*
-		 * Cable signal integrity means we should run the bus
-		 * slightly slower. Do not override if a kernel param
-		 * has already overridden.
-		 */
-		if (aspeed_fsi_divisor == FSI_DIVISOR_DEFAULT)
-			aspeed_fsi_divisor = FSI_DIVISOR_CABLED;
-
 		gpiod_direction_output(mux_gpio, 0);
 		dev_info(dev, "FSI configured for external cable\n");
 	} else {
@@ -549,9 +487,13 @@  static int fsi_master_aspeed_probe(struct platform_device *pdev)
 {
 	const struct fsi_master_aspeed_data *md = of_device_get_match_data(&pdev->dev);
 	u32 opb_retry_counter = md ? md->opb_retry_counter : OPB_RC_DEFAULT;
+	const struct regmap_bus *bus = &regmap_aspeed_opb;
+	struct regmap_config aspeed_master_regmap_config;
 	struct fsi_master_aspeed *aspeed;
-	int rc, links, reg;
-	__be32 raw;
+	u32 opb_ctrl_base = ctrl_base;
+	struct resource *res;
+	unsigned int reg;
+	int rc, links;
 
 	rc = tacoma_cabled_fsi_fixup(&pdev->dev);
 	if (rc) {
@@ -571,6 +513,17 @@  static int fsi_master_aspeed_probe(struct platform_device *pdev)
 		goto err_free_aspeed;
 	}
 
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
+	if (res) {
+		aspeed->ctrl = devm_ioremap_resource(&pdev->dev, res);
+		if (!IS_ERR(aspeed->ctrl)) {
+			/* Access FSI controller over AHB */
+			opb_ctrl_base = res->start;
+			opb_retry_counter &= ~OPB_RC_CTRL_OPB;
+			bus = &regmap_ast2700;
+		}
+	}
+
 	aspeed->clk = devm_clk_get(aspeed->dev, NULL);
 	if (IS_ERR(aspeed->clk)) {
 		dev_err(aspeed->dev, "couldn't get clock\n");
@@ -594,7 +547,7 @@  static int fsi_master_aspeed_probe(struct platform_device *pdev)
 
 	writel(opb_retry_counter, aspeed->base + OPB_RETRY_COUNTER);
 
-	writel(ctrl_base, aspeed->base + OPB_CTRL_BASE);
+	writel(opb_ctrl_base, aspeed->base + OPB_CTRL_BASE);
 	writel(fsi_base, aspeed->base + OPB_FSI_BASE);
 
 	/* Set read data order */
@@ -611,13 +564,19 @@  static int fsi_master_aspeed_probe(struct platform_device *pdev)
 	 */
 	writel(0x1, aspeed->base + OPB0_SELECT);
 
-	rc = opb_readl(aspeed, ctrl_base + FSI_MVER, &raw);
+	fsi_master_regmap_config(&aspeed_master_regmap_config);
+	aspeed->master.map = regmap_init(&pdev->dev, bus, aspeed, &aspeed_master_regmap_config);
+	if (IS_ERR(aspeed->master.map)) {
+		rc = PTR_ERR(aspeed->master.map);
+		goto err_release;
+	}
+
+	rc = regmap_read(aspeed->master.map, FSI_MVER, &reg);
 	if (rc) {
 		dev_err(&pdev->dev, "failed to read hub version\n");
-		goto err_release;
+		goto err_regmap;
 	}
 
-	reg = be32_to_cpu(raw);
 	links = (reg >> 8) & 0xff;
 	dev_info(&pdev->dev, "hub version %08x (%d links)\n", reg, links);
 
@@ -626,20 +585,22 @@  static int fsi_master_aspeed_probe(struct platform_device *pdev)
 	aspeed->master.dev.of_node = of_node_get(dev_of_node(&pdev->dev));
 
 	aspeed->master.n_links = links;
+	aspeed->master.flags = FSI_MASTER_FLAG_RELA;
 	aspeed->master.read = aspeed_master_read;
 	aspeed->master.write = aspeed_master_write;
 	aspeed->master.send_break = aspeed_master_break;
 	aspeed->master.term = aspeed_master_term;
-	aspeed->master.link_enable = aspeed_master_link_enable;
 
 	dev_set_drvdata(&pdev->dev, aspeed);
 
 	mutex_init(&aspeed->lock);
-	aspeed_master_init(aspeed);
+	rc = fsi_master_init(&aspeed->master, clk_get_rate(aspeed->clk));
+	if (rc)
+		goto err_regmap;
 
 	rc = fsi_master_register(&aspeed->master);
 	if (rc)
-		goto err_release;
+		goto err_regmap;
 
 	/* At this point, fsi_master_register performs the device_initialize(),
 	 * and holds the sole reference on master.dev. This means the device
@@ -651,6 +612,8 @@  static int fsi_master_aspeed_probe(struct platform_device *pdev)
 	get_device(&aspeed->master.dev);
 	return 0;
 
+err_regmap:
+	regmap_exit(aspeed->master.map);
 err_release:
 	clk_disable_unprepare(aspeed->clk);
 err_free_aspeed: