diff mbox series

[v2,3/4] spi: xcomm: remove i2c_set_clientdata()

Message ID 20240705-dev-spi-xcomm-gpiochip-v2-3-b10842fc9636@analog.com (mailing list archive)
State Accepted
Commit 5e7d4755c58a347b4fe7663cef9b169b0965d09d
Headers show
Series spi: xcomm: support GPO pin | expand

Commit Message

Nuno Sa via B4 Relay July 5, 2024, 3:12 p.m. UTC
From: Nuno Sa <nuno.sa@analog.com>

i2c_get_clientdata() is not being called anywhere so that we do not need
to set clientdata.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
---
 drivers/spi/spi-xcomm.c | 1 -
 1 file changed, 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c
index 5bbc250bc0534..1cd7d2b9e11c9 100644
--- a/drivers/spi/spi-xcomm.c
+++ b/drivers/spi/spi-xcomm.c
@@ -261,7 +261,6 @@  static int spi_xcomm_probe(struct i2c_client *i2c)
 	host->flags = SPI_CONTROLLER_HALF_DUPLEX;
 	host->transfer_one_message = spi_xcomm_transfer_one;
 	host->dev.of_node = i2c->dev.of_node;
-	i2c_set_clientdata(i2c, host);
 
 	ret = devm_spi_register_controller(&i2c->dev, host);
 	if (ret < 0)