[v2] spi: mt65xx: add PM QoS support

Commit Message

Leilk Liu March 4, 2025, 2:37 a.m. UTC

Enable Quality of Service(QoS) support to speed up interrupt service
routine handle. Sometimes, a gic interrupt will be generated after
SPI transmission, but at this time the CPU is in an idle state and the
processing handler will be very slow. It takes time to exit the idle state
and then become active. This will cause the SPI handler to execute slowly
and cause SPI transfer timeouts.

Signed-off-by: Leilk Liu <[e-mail]>
---
v2: 
 1. add qos_request description in mtk_spi
---
 drivers/spi/spi-mt65xx.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Comments

Mark Brown March 11, 2025, 5:17 p.m. UTC | #1

On Tue, 04 Mar 2025 10:37:15 +0800, Leilk Liu wrote:
> Enable Quality of Service(QoS) support to speed up interrupt service
> routine handle. Sometimes, a gic interrupt will be generated after
> SPI transmission, but at this time the CPU is in an idle state and the
> processing handler will be very slow. It takes time to exit the idle state
> and then become active. This will cause the SPI handler to execute slowly
> and cause SPI transfer timeouts.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: mt65xx: add PM QoS support
      commit: 632556d5799a2b3e87dd5594a59245523b39cf31

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Patch

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 197bf2dbe5de..4b0a1c0db041 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -20,6 +20,7 @@ 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi-mem.h>
 #include <linux/dma-mapping.h>
+#include <linux/pm_qos.h>
 
 #define SPI_CFG0_REG			0x0000
 #define SPI_CFG1_REG			0x0004
@@ -147,6 +148,7 @@  struct mtk_spi_compatible {
  * @tx_sgl_len:		Size of TX DMA transfer
  * @rx_sgl_len:		Size of RX DMA transfer
  * @dev_comp:		Device data structure
+ * @qos_request:	QoS request
  * @spi_clk_hz:		Current SPI clock in Hz
  * @spimem_done:	SPI-MEM operation completion
  * @use_spimem:		Enables SPI-MEM
@@ -166,6 +168,7 @@  struct mtk_spi {
 	struct scatterlist *tx_sgl, *rx_sgl;
 	u32 tx_sgl_len, rx_sgl_len;
 	const struct mtk_spi_compatible *dev_comp;
+	struct pm_qos_request qos_request;
 	u32 spi_clk_hz;
 	struct completion spimem_done;
 	bool use_spimem;
@@ -356,6 +359,7 @@  static int mtk_spi_hw_init(struct spi_controller *host,
 	struct mtk_chip_config *chip_config = spi->controller_data;
 	struct mtk_spi *mdata = spi_controller_get_devdata(host);
 
+	cpu_latency_qos_update_request(&mdata->qos_request, 500);
 	cpha = spi->mode & SPI_CPHA ? 1 : 0;
 	cpol = spi->mode & SPI_CPOL ? 1 : 0;
 
@@ -459,6 +463,15 @@  static int mtk_spi_prepare_message(struct spi_controller *host,
 	return mtk_spi_hw_init(host, msg->spi);
 }
 
+static int mtk_spi_unprepare_message(struct spi_controller *host,
+				     struct spi_message *message)
+{
+	struct mtk_spi *mdata = spi_controller_get_devdata(host);
+
+	cpu_latency_qos_update_request(&mdata->qos_request, PM_QOS_DEFAULT_VALUE);
+	return 0;
+}
+
 static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	u32 reg_val;
@@ -1143,6 +1156,7 @@  static int mtk_spi_probe(struct platform_device *pdev)
 
 	host->set_cs = mtk_spi_set_cs;
 	host->prepare_message = mtk_spi_prepare_message;
+	host->unprepare_message = mtk_spi_unprepare_message;
 	host->transfer_one = mtk_spi_transfer_one;
 	host->can_dma = mtk_spi_can_dma;
 	host->setup = mtk_spi_setup;
@@ -1249,6 +1263,8 @@  static int mtk_spi_probe(struct platform_device *pdev)
 		clk_disable_unprepare(mdata->spi_hclk);
 	}
 
+	cpu_latency_qos_add_request(&mdata->qos_request, PM_QOS_DEFAULT_VALUE);
+
 	if (mdata->dev_comp->need_pad_sel) {
 		if (mdata->pad_num != host->num_chipselect)
 			return dev_err_probe(dev, -EINVAL,
@@ -1292,6 +1308,7 @@  static void mtk_spi_remove(struct platform_device *pdev)
 	struct mtk_spi *mdata = spi_controller_get_devdata(host);
 	int ret;
 
+	cpu_latency_qos_remove_request(&mdata->qos_request);
 	if (mdata->use_spimem && !completion_done(&mdata->spimem_done))
 		complete(&mdata->spimem_done);