Message ID | E1bPubM-0002u3-AQ@debutante (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Hi Mark, On Wed, Jul 20, 2016 at 05:44:04PM +0100, Mark Brown wrote: > The patch > > spi: rockchip: limit transfers to (64K - 1) bytes > > has been applied to the spi tree at > > git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git > > All being well this means that it will be integrated into the linux-next > tree (usually sometime in the next 24 hours) and sent to Linus during > the next merge window (or sooner if it is a bug fix), however if > problems are discovered then the patch may be dropped or reverted. > > You may get further e-mails resulting from automated or manual testing > and review of the tree, please engage with people reporting problems and > send followup patches addressing any issues that are reported if needed. > > If any updates are required or you are submitting further changes they > should be sent as incremental updates against current git, existing > patches will not be replaced. > > Please add any relevant lists and maintainers to the CCs when replying > to this mail. > > Thanks, > Mark > > From 5185a81c02d4118b11e6cb7b5fbf6f15ff7aff90 Mon Sep 17 00:00:00 2001 > From: Brian Norris <briannorris@chromium.org> > Date: Thu, 14 Jul 2016 18:30:59 -0700 > Subject: [PATCH] spi: rockchip: limit transfers to (64K - 1) bytes > > The Rockchip SPI controller's length register only supports 16-bits, > yielding a maximum length of 64KiB (the CTRLR1 register holds "length - > 1"). Trying to transfer more than that (e.g., with a large SPI flash > read) will cause the driver to hang. > > Now, it seems that while theoretically we should be able to program > CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to > cause the core to choke, so stick with a maximum of 64K - 1 bytes -- > i.e., 0xffff. > > Signed-off-by: Brian Norris <briannorris@chromium.org> > Signed-off-by: Mark Brown <broonie@kernel.org> Thanks for applying! I'm OK with that, but just to be clear this might qualify as a (very slight) hack, since I believe we should be able to support a full 64KiB on both PIO and DMA. But it is better than the current state of things on this driver, IMO. I suppose it's up to Rockchip (or me) to figure out why some PIO transfers fail at exactly 64K if we want to support that. They have reproduced the failures I've seen. Brian -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index cd89682065b9..cf69f4dfb8c7 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -142,6 +142,12 @@ /* sclk_out: spi master internal logic in rk3x can support 50Mhz */ #define MAX_SCLK_OUT 50000000 +/* + * SPI_CTRLR1 is 16-bits, so we should support lengths of 0xffff + 1. However, + * the controller seems to hang when given 0x10000, so stick with this for now. + */ +#define ROCKCHIP_SPI_MAX_TRANLEN 0xffff + enum rockchip_ssi_type { SSI_MOTO_SPI = 0, SSI_TI_SSP, @@ -573,6 +579,11 @@ static void rockchip_spi_config(struct rockchip_spi *rs) dev_dbg(rs->dev, "cr0 0x%x, div %d\n", cr0, div); } +static size_t rockchip_spi_max_transfer_size(struct spi_device *spi) +{ + return ROCKCHIP_SPI_MAX_TRANLEN; +} + static int rockchip_spi_transfer_one( struct spi_master *master, struct spi_device *spi, @@ -589,6 +600,11 @@ static int rockchip_spi_transfer_one( return -EINVAL; } + if (xfer->len > ROCKCHIP_SPI_MAX_TRANLEN) { + dev_err(rs->dev, "Transfer is too long (%d)\n", xfer->len); + return -EINVAL; + } + rs->speed = xfer->speed_hz; rs->bpw = xfer->bits_per_word; rs->n_bytes = rs->bpw >> 3; @@ -728,6 +744,7 @@ static int rockchip_spi_probe(struct platform_device *pdev) master->prepare_message = rockchip_spi_prepare_message; master->unprepare_message = rockchip_spi_unprepare_message; master->transfer_one = rockchip_spi_transfer_one; + master->max_transfer_size = rockchip_spi_max_transfer_size; master->handle_err = rockchip_spi_handle_err; rs->dma_tx.ch = dma_request_chan(rs->dev, "tx");