@@ -175,10 +175,7 @@ static int spi_st_transfer_one(struct spi_master *master,
static void spi_st_cleanup(struct spi_device *spi)
{
- int cs = spi->cs_gpio;
-
- if (gpio_is_valid(cs))
- devm_gpio_free(&spi->dev, cs);
+ gpio_free(spi->cs_gpio);
}
/* the spi->mode bits understood by this driver: */
@@ -201,14 +198,15 @@ static int spi_st_setup(struct spi_device *spi)
return -EINVAL;
}
- if (devm_gpio_request(&spi->dev, cs, dev_name(&spi->dev))) {
+ ret = gpio_request(cs, dev_name(&spi->dev));
+ if (ret) {
dev_err(&spi->dev, "could not request gpio:%d\n", cs);
- return -EINVAL;
+ return ret;
}
ret = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
if (ret)
- return ret;
+ goto out_free_gpio;
spi_st_clk = clk_get_rate(spi_st->clk);
@@ -217,7 +215,8 @@ static int spi_st_setup(struct spi_device *spi)
if (sscbrg < 0x07 || sscbrg > BIT(16)) {
dev_err(&spi->dev,
"baudrate %d outside valid range %d\n", sscbrg, hz);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out_free_gpio;
}
spi_st->baud = spi_st_clk / (2 * sscbrg);
@@ -266,6 +265,10 @@ static int spi_st_setup(struct spi_device *spi)
readl_relaxed(spi_st->base + SSC_RBUF);
return 0;
+
+out_free_gpio:
+ gpio_free(cs);
+ return ret;
}
/* Interrupt fired when TX shift register becomes empty */