diff mbox series

target: core: remove from tmr_list at lun unlink

Message ID 20210407142140.29947-1-d.bogdanov@yadro.com (mailing list archive)
State Superseded
Headers show
Series target: core: remove from tmr_list at lun unlink | expand

Commit Message

Dmitry Bogdanov April 7, 2021, 2:21 p.m. UTC
Currently TMF commands are removed from de_device.dev_tmf_list at
the very end of se_cmd lifecycle. But se_lun unlinks from se_cmd
up on a command status (response) is queued in transport layer.
It means that LUN and backend device can be deleted meantime and at
the moment of repsonse completion a panic is occured:

target_tmr_work()
	cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire
	transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun
— // — // — // —
<<<--- lun remove
<<<--- core backend device remove
— // — // — // —
qlt_handle_abts_completion()
  tfo->free_mcmd()
    transport_generic_free_cmd()
      target_put_sess_cmd()
        core_tmr_release_req() {
          if (dev) { // backend device, can not be null
            spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH

Call Trace:
NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0
LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod]
Call Trace:
(unreliable)
0x0
target_put_sess_cmd+0x2a0/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx]
process_one_work+0x2c4/0x5c0
worker_thread+0x88/0x690

For FC protocol it is a race condition, but for iSCSI protocol it is
easyly reproduced by manual sending iSCSI commands:
- Send some SCSI sommand
- Send Abort of that command over iSCSI
- Remove LUN on target
- Send next iSCSI command to acknowledge the Abort_Response
- target panics

There is no sense to keep the command in tmr_list until response
completion, so move the removal from tmr_list from the response
completion to the response queueing when lun is unlinked.
Move the removal from state list too as it is a subject to the same
race condition.

Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>

---
The issue exists from the very begining.
I uploaded a script that helps to reproduce the issue at
https://gist.github.com/logost/cb93df41dd2432454324449b390403c4
---
 drivers/target/target_core_tmr.c       |  9 ---------
 drivers/target/target_core_transport.c | 19 +++++++++++++++++--
 2 files changed, 17 insertions(+), 11 deletions(-)

Comments

Mike Christie April 9, 2021, 5:18 p.m. UTC | #1
On 4/7/21 9:21 AM, Dmitry Bogdanov wrote:
> Currently TMF commands are removed from de_device.dev_tmf_list at
> the very end of se_cmd lifecycle. But se_lun unlinks from se_cmd
> up on a command status (response) is queued in transport layer.
> It means that LUN and backend device can be deleted meantime and at
> the moment of repsonse completion a panic is occured:
> 
> target_tmr_work()
> 	cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire
> 	transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun
> — // — // — // —
> <<<--- lun remove
> <<<--- core backend device remove
> — // — // — // —
> qlt_handle_abts_completion()
>   tfo->free_mcmd()
>     transport_generic_free_cmd()
>       target_put_sess_cmd()
>         core_tmr_release_req() {
>           if (dev) { // backend device, can not be null
>             spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH
> 
> Call Trace:
> NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0
> LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod]
> Call Trace:
> (unreliable)
> 0x0
> target_put_sess_cmd+0x2a0/0x370 [target_core_mod]
> transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
> tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx]
> process_one_work+0x2c4/0x5c0
> worker_thread+0x88/0x690
> 
> For FC protocol it is a race condition, but for iSCSI protocol it is
> easyly reproduced by manual sending iSCSI commands:
> - Send some SCSI sommand
> - Send Abort of that command over iSCSI
> - Remove LUN on target
> - Send next iSCSI command to acknowledge the Abort_Response
> - target panics
> 
> There is no sense to keep the command in tmr_list until response
> completion, so move the removal from tmr_list from the response
> completion to the response queueing when lun is unlinked.
> Move the removal from state list too as it is a subject to the same
> race condition.
> 
> Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
> 
> ---
> The issue exists from the very begining.
> I uploaded a script that helps to reproduce the issue at
> https://urldefense.com/v3/__https://gist.github.com/logost/cb93df41dd2432454324449b390403c4__;!!GqivPVa7Brio!KN-N7Ult7Itn2AzY6LdP2vm0D81UIjpbCyOAH3uf2OoLGUykpGP3dJTQlLm9m71MjsxY$ 
> ---
>  drivers/target/target_core_tmr.c       |  9 ---------
>  drivers/target/target_core_transport.c | 19 +++++++++++++++++--
>  2 files changed, 17 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
> index 7347285471fa..323a173010c1 100644
> --- a/drivers/target/target_core_tmr.c
> +++ b/drivers/target/target_core_tmr.c
> @@ -50,15 +50,6 @@ EXPORT_SYMBOL(core_tmr_alloc_req);
>  
>  void core_tmr_release_req(struct se_tmr_req *tmr)
>  {
> -	struct se_device *dev = tmr->tmr_dev;
> -	unsigned long flags;
> -
> -	if (dev) {
> -		spin_lock_irqsave(&dev->se_tmr_lock, flags);
> -		list_del_init(&tmr->tmr_list);
> -		spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
> -	}
> -
>  	kfree(tmr);
>  }
>  
> diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
> index 5ecb9f18a53d..4d9968f43cf1 100644
> --- a/drivers/target/target_core_transport.c
> +++ b/drivers/target/target_core_transport.c
> @@ -667,6 +667,20 @@ static void target_remove_from_state_list(struct se_cmd *cmd)
>  	spin_unlock_irqrestore(&dev->queues[cmd->cpuid].lock, flags);
>  }
>  
> +static void target_remove_from_tmr_list(struct se_cmd *cmd)
> +{
> +	struct se_device *dev = NULL;
> +	unsigned long flags;
> +

This is just a nit. Maybe just do:

struct se_device *dev = NULL;
unsigned long flags;

if (!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB))
	return;

dev = cmd->se_tmr_req->tmr_dev;
spin_lock_irqsave(&dev->se_tmr_lock, flags);
list_del_init(&cmd->se_tmr_req->tmr_list);
spin_unlock_irqrestore(&dev->se_tmr_lock, flags);


It will look like target_remove_from_state_list. Below I was expecting
some sort of twist ending with the extra if in there. But we just wanted
to run the function for tmrs.


> +	if (cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)
> +		dev = cmd->se_tmr_req->tmr_dev;
> +
> +	if (dev) {
> +		spin_lock_irqsave(&dev->se_tmr_lock, flags);
> +		list_del_init(&cmd->se_tmr_req->tmr_list);
> +		spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
> +	}
> +}
>  /*
>   * This function is called by the target core after the target core has
>   * finished processing a SCSI command or SCSI TMF. Both the regular command
> @@ -678,8 +692,6 @@ static int transport_cmd_check_stop_to_fabric(struct se_cmd *cmd)
>  {
>  	unsigned long flags;
>  
> -	target_remove_from_state_list(cmd);
> -
>  	/*
>  	 * Clear struct se_cmd->se_lun before the handoff to FE.
>  	 */

Right below this line we clear se_cmd->selun. I think that should go in
transport_lun_remove_cmd since it's the function that does the put and now
with your changes we handle all the last refs there.


> @@ -719,6 +731,9 @@ static void transport_lun_remove_cmd(struct se_cmd *cmd)
>  	if (!lun)
>  		return;
>  
> +	target_remove_from_state_list(cmd);
> +	target_remove_from_tmr_list(cmd);
> +
>  	if (cmpxchg(&cmd->lun_ref_active, true, false))
>  		percpu_ref_put(&lun->lun_ref);
>  }
>
Mike Christie April 9, 2021, 5:34 p.m. UTC | #2
On 4/9/21 12:18 PM, Mike Christie wrote:
> On 4/7/21 9:21 AM, Dmitry Bogdanov wrote:
>> Currently TMF commands are removed from de_device.dev_tmf_list at
>> the very end of se_cmd lifecycle. But se_lun unlinks from se_cmd
>> up on a command status (response) is queued in transport layer.
>> It means that LUN and backend device can be deleted meantime and at
>> the moment of repsonse completion a panic is occured:
>>
>> target_tmr_work()
>> 	cmd->se_tfo->queue_tm_rsp(cmd); // send abort_rsp to a wire
>> 	transport_lun_remove_cmd(cmd) // unlink se_cmd from se_lun
>> — // — // — // —
>> <<<--- lun remove
>> <<<--- core backend device remove
>> — // — // — // —
>> qlt_handle_abts_completion()
>>   tfo->free_mcmd()
>>     transport_generic_free_cmd()
>>       target_put_sess_cmd()
>>         core_tmr_release_req() {
>>           if (dev) { // backend device, can not be null
>>             spin_lock_irqsave(&dev->se_tmr_lock, flags); //<<<--- CRASH
>>
>> Call Trace:
>> NIP [c000000000e1683c] _raw_spin_lock_irqsave+0x2c/0xc0
>> LR [c00800000e433338] core_tmr_release_req+0x40/0xa0 [target_core_mod]
>> Call Trace:
>> (unreliable)
>> 0x0
>> target_put_sess_cmd+0x2a0/0x370 [target_core_mod]
>> transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
>> tcm_qla2xxx_complete_mcmd+0x28/0x50 [tcm_qla2xxx]
>> process_one_work+0x2c4/0x5c0
>> worker_thread+0x88/0x690
>>
>> For FC protocol it is a race condition, but for iSCSI protocol it is
>> easyly reproduced by manual sending iSCSI commands:
>> - Send some SCSI sommand
>> - Send Abort of that command over iSCSI
>> - Remove LUN on target
>> - Send next iSCSI command to acknowledge the Abort_Response
>> - target panics
>>
>> There is no sense to keep the command in tmr_list until response
>> completion, so move the removal from tmr_list from the response
>> completion to the response queueing when lun is unlinked.
>> Move the removal from state list too as it is a subject to the same
>> race condition.
>>
>> Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
>> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
>> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
>>
>> ---
>> The issue exists from the very begining.
>> I uploaded a script that helps to reproduce the issue at
>> https://urldefense.com/v3/__https://gist.github.com/logost/cb93df41dd2432454324449b390403c4__;!!GqivPVa7Brio!KN-N7Ult7Itn2AzY6LdP2vm0D81UIjpbCyOAH3uf2OoLGUykpGP3dJTQlLm9m71MjsxY$ 
>> ---
>>  drivers/target/target_core_tmr.c       |  9 ---------
>>  drivers/target/target_core_transport.c | 19 +++++++++++++++++--
>>  2 files changed, 17 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
>> index 7347285471fa..323a173010c1 100644
>> --- a/drivers/target/target_core_tmr.c
>> +++ b/drivers/target/target_core_tmr.c
>> @@ -50,15 +50,6 @@ EXPORT_SYMBOL(core_tmr_alloc_req);
>>  
>>  void core_tmr_release_req(struct se_tmr_req *tmr)
>>  {
>> -	struct se_device *dev = tmr->tmr_dev;
>> -	unsigned long flags;
>> -
>> -	if (dev) {
>> -		spin_lock_irqsave(&dev->se_tmr_lock, flags);
>> -		list_del_init(&tmr->tmr_list);
>> -		spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
>> -	}
>> -
>>  	kfree(tmr);
>>  }
>>  
>> diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
>> index 5ecb9f18a53d..4d9968f43cf1 100644
>> --- a/drivers/target/target_core_transport.c
>> +++ b/drivers/target/target_core_transport.c
>> @@ -667,6 +667,20 @@ static void target_remove_from_state_list(struct se_cmd *cmd)
>>  	spin_unlock_irqrestore(&dev->queues[cmd->cpuid].lock, flags);
>>  }
>>  
>> +static void target_remove_from_tmr_list(struct se_cmd *cmd)
>> +{
>> +	struct se_device *dev = NULL;
>> +	unsigned long flags;
>> +
> 
> This is just a nit. Maybe just do:
> 
> struct se_device *dev = NULL;
> unsigned long flags;
> 
> if (!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB))
> 	return;
> 
> dev = cmd->se_tmr_req->tmr_dev;
> spin_lock_irqsave(&dev->se_tmr_lock, flags);
> list_del_init(&cmd->se_tmr_req->tmr_list);
> spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
> 

This might be wrong. I thought when you moved the deletion to
transport_cmd_check_stop_to_fabric, we would always have a dev set.
But in core_tmr_abort_task there is that transport_lookup_tmr_lun
check. If that is a valid check in there and it could be NULL in
the path:

transport_generic_handle_tmr -> target_handle_abort -> 
ransport_cmd_check_stop_to_fabric

then we would hit a NULL pointer. I'm not sure how we would get a NULL
dev there though. The driver would have to not use the standard
target_submit_tmr or be iscsi and not call transport_lookup_tmr_lun.


One issue with the patch though is if iscsit_tmr_abort_task fails then we don't
call transport_cmd_check_stop_to_fabric, so the tmr will be stuck on the list.
Dmitry Bogdanov April 13, 2021, 3:53 p.m. UTC | #3
Hi Mike,

> > This is just a nit. Maybe just do:
> > 
> > struct se_device *dev = NULL;
> > unsigned long flags;
> > 
> > if (!(cmd->se_cmd_flags & SCF_SCSI_TMR_CDB))
> > 	return;
> > 
> > dev = cmd->se_tmr_req->tmr_dev;
> > spin_lock_irqsave(&dev->se_tmr_lock, flags);
> > list_del_init(&cmd->se_tmr_req->tmr_list);
> > spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
> > 

> This might be wrong. I thought when you moved the deletion to
> transport_cmd_check_stop_to_fabric, we would always have a dev set.
> But in core_tmr_abort_task there is that transport_lookup_tmr_lun
> check. If that is a valid check in there and it could be NULL in
> the path:

> transport_generic_handle_tmr -> target_handle_abort -> 
> ransport_cmd_check_stop_to_fabric
>
> then we would hit a NULL pointer. I'm not sure how we would get a NULL
> dev there though. The driver would have to not use the standard
> target_submit_tmr or be iscsi and not call transport_lookup_tmr_lun.
In theory it can do some out-of-tree transport driver, ok I will keep a guard
in target_remove_from_tmr_list().

>
> One issue with the patch though is if iscsit_tmr_abort_task fails then we don't
> call transport_cmd_check_stop_to_fabric, so the tmr will be stuck on the list.
Yes, I see. I am going to use this patch to solve it:
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -2142,7 +2142,7 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
         * TMR TASK_REASSIGN.
         */
        iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state);
-       target_put_sess_cmd(&cmd->se_cmd);
+       transport_generic_free_cmd(&cmd->se_cmd, false);
        return 0;
 }
 EXPORT_SYMBOL(iscsit_handle_task_mgt_cmd);


BR,
 Dmitry
diff mbox series

Patch

diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 7347285471fa..323a173010c1 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -50,15 +50,6 @@  EXPORT_SYMBOL(core_tmr_alloc_req);
 
 void core_tmr_release_req(struct se_tmr_req *tmr)
 {
-	struct se_device *dev = tmr->tmr_dev;
-	unsigned long flags;
-
-	if (dev) {
-		spin_lock_irqsave(&dev->se_tmr_lock, flags);
-		list_del_init(&tmr->tmr_list);
-		spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
-	}
-
 	kfree(tmr);
 }
 
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 5ecb9f18a53d..4d9968f43cf1 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -667,6 +667,20 @@  static void target_remove_from_state_list(struct se_cmd *cmd)
 	spin_unlock_irqrestore(&dev->queues[cmd->cpuid].lock, flags);
 }
 
+static void target_remove_from_tmr_list(struct se_cmd *cmd)
+{
+	struct se_device *dev = NULL;
+	unsigned long flags;
+
+	if (cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)
+		dev = cmd->se_tmr_req->tmr_dev;
+
+	if (dev) {
+		spin_lock_irqsave(&dev->se_tmr_lock, flags);
+		list_del_init(&cmd->se_tmr_req->tmr_list);
+		spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
+	}
+}
 /*
  * This function is called by the target core after the target core has
  * finished processing a SCSI command or SCSI TMF. Both the regular command
@@ -678,8 +692,6 @@  static int transport_cmd_check_stop_to_fabric(struct se_cmd *cmd)
 {
 	unsigned long flags;
 
-	target_remove_from_state_list(cmd);
-
 	/*
 	 * Clear struct se_cmd->se_lun before the handoff to FE.
 	 */
@@ -719,6 +731,9 @@  static void transport_lun_remove_cmd(struct se_cmd *cmd)
 	if (!lun)
 		return;
 
+	target_remove_from_state_list(cmd);
+	target_remove_from_tmr_list(cmd);
+
 	if (cmpxchg(&cmd->lun_ref_active, true, false))
 		percpu_ref_put(&lun->lun_ref);
 }