diff mbox

[v3,2/7] tpm_tis: Disable interrupt auto probing on a per-device basis

Message ID 1450376600-6970-3-git-send-email-jgunthorpe@obsidianresearch.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jason Gunthorpe Dec. 17, 2015, 6:23 p.m. UTC
Instead of clearing the global interrupts flag when any device
does not have an interrupt just pass -1 through tpm_info.irq.

The only thing that asks for autoprobing is the force=1 path.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---
 drivers/char/tpm/tpm_tis.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

Comments

Jarkko Sakkinen Jan. 3, 2016, 5:20 p.m. UTC | #1
On Thu, Dec 17, 2015 at 11:23:15AM -0700, Jason Gunthorpe wrote:
> Instead of clearing the global interrupts flag when any device
> does not have an interrupt just pass -1 through tpm_info.irq.
> 
> The only thing that asks for autoprobing is the force=1 path.

Sorry for my ignorance but what does this patch help? Why interrupts
flag is not enough?

> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Did I already give Tested-by's for this series (I did for those that
went into v4.5 pull request)?

/Jarkko

> ---
>  drivers/char/tpm/tpm_tis.c | 18 ++++++++++--------
>  1 file changed, 10 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 304323bdcaaa..fecd27b45fd1 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -69,7 +69,11 @@ enum tis_defaults {
>  struct tpm_info {
>  	unsigned long start;
>  	unsigned long len;
> -	unsigned int irq;
> +	/* irq > 0 means: use irq $irq;
> +	 * irq = 0 means: autoprobe for an irq;
> +	 * irq = -1 means: no irq support
> +	 */
> +	int irq;
>  };
>  
>  static struct tpm_info tis_default_info = {
> @@ -807,7 +811,7 @@ static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info,
>  	/* INTERRUPT Setup */
>  	init_waitqueue_head(&chip->vendor.read_queue);
>  	init_waitqueue_head(&chip->vendor.int_queue);
> -	if (interrupts) {
> +	if (interrupts && tpm_info->irq != -1) {
>  		if (tpm_info->irq) {
>  			tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
>  						 tpm_info->irq);
> @@ -895,9 +899,9 @@ static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
>  
>  #ifdef CONFIG_PNP
>  static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
> -				      const struct pnp_device_id *pnp_id)
> +			    const struct pnp_device_id *pnp_id)
>  {
> -	struct tpm_info tpm_info = tis_default_info;
> +	struct tpm_info tpm_info = {};
>  	acpi_handle acpi_dev_handle = NULL;
>  
>  	tpm_info.start = pnp_mem_start(pnp_dev, 0);
> @@ -906,7 +910,7 @@ static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
>  	if (pnp_irq_valid(pnp_dev, 0))
>  		tpm_info.irq = pnp_irq(pnp_dev, 0);
>  	else
> -		interrupts = false;
> +		tpm_info.irq = -1;
>  
>  #ifdef CONFIG_ACPI
>  	if (pnp_acpi_device(pnp_dev)) {
> @@ -984,6 +988,7 @@ static int tpm_tis_acpi_init(struct acpi_device *acpi_dev)
>  		return -ENODEV;
>  
>  	INIT_LIST_HEAD(&resources);
> +	tpm_info.irq = -1;
>  	ret = acpi_dev_get_resources(acpi_dev, &resources, tpm_check_resource,
>  				     &tpm_info);
>  	if (ret < 0)
> @@ -991,9 +996,6 @@ static int tpm_tis_acpi_init(struct acpi_device *acpi_dev)
>  
>  	acpi_dev_free_resource_list(&resources);
>  
> -	if (!tpm_info.irq)
> -		interrupts = false;
> -
>  	if (is_itpm(acpi_dev))
>  		itpm = true;
>  
> -- 
> 2.1.4
> 

------------------------------------------------------------------------------
Jason Gunthorpe Jan. 4, 2016, 6:24 p.m. UTC | #2
On Sun, Jan 03, 2016 at 07:20:40PM +0200, Jarkko Sakkinen wrote:
> On Thu, Dec 17, 2015 at 11:23:15AM -0700, Jason Gunthorpe wrote:
> > Instead of clearing the global interrupts flag when any device
> > does not have an interrupt just pass -1 through tpm_info.irq.
> > 
> > The only thing that asks for autoprobing is the force=1 path.
> 
> Sorry for my ignorance but what does this patch help? Why interrupts
> flag is not enough?

It is wrong for a driver's probe function to change global state, and
very wrong to change a module option.

> > Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> > Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
> > Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> 
> Did I already give Tested-by's for this series (I did for those that
> went into v4.5 pull request)?

You said you tested the crb stuff, which is this series... Did you
test something else?

Jason

------------------------------------------------------------------------------
Jarkko Sakkinen Jan. 4, 2016, 6:32 p.m. UTC | #3
On Mon, Jan 04, 2016 at 11:24:42AM -0700, Jason Gunthorpe wrote:
> On Sun, Jan 03, 2016 at 07:20:40PM +0200, Jarkko Sakkinen wrote:
> > On Thu, Dec 17, 2015 at 11:23:15AM -0700, Jason Gunthorpe wrote:
> > > Instead of clearing the global interrupts flag when any device
> > > does not have an interrupt just pass -1 through tpm_info.irq.
> > > 
> > > The only thing that asks for autoprobing is the force=1 path.
> > 
> > Sorry for my ignorance but what does this patch help? Why interrupts
> > flag is not enough?
> 
> It is wrong for a driver's probe function to change global state, and
> very wrong to change a module option.

I disagree about global state in some sense but module options should
stay static. That's much better argument.

> > > Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> > > Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
> > > Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > 
> > Did I already give Tested-by's for this series (I did for those that
> > went into v4.5 pull request)?
> 
> You said you tested the crb stuff, which is this series... Did you
> test something else?

Checked my emails. Right I did run my tests for this (both with FIFO
and CRB driver). It was bit "stormy" before Christmas with all kinds
of small patches so I wasn't sure.

Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

> Jason

/Jarkko

------------------------------------------------------------------------------
diff mbox

Patch

diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 304323bdcaaa..fecd27b45fd1 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -69,7 +69,11 @@  enum tis_defaults {
 struct tpm_info {
 	unsigned long start;
 	unsigned long len;
-	unsigned int irq;
+	/* irq > 0 means: use irq $irq;
+	 * irq = 0 means: autoprobe for an irq;
+	 * irq = -1 means: no irq support
+	 */
+	int irq;
 };
 
 static struct tpm_info tis_default_info = {
@@ -807,7 +811,7 @@  static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info,
 	/* INTERRUPT Setup */
 	init_waitqueue_head(&chip->vendor.read_queue);
 	init_waitqueue_head(&chip->vendor.int_queue);
-	if (interrupts) {
+	if (interrupts && tpm_info->irq != -1) {
 		if (tpm_info->irq) {
 			tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
 						 tpm_info->irq);
@@ -895,9 +899,9 @@  static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
 
 #ifdef CONFIG_PNP
 static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
-				      const struct pnp_device_id *pnp_id)
+			    const struct pnp_device_id *pnp_id)
 {
-	struct tpm_info tpm_info = tis_default_info;
+	struct tpm_info tpm_info = {};
 	acpi_handle acpi_dev_handle = NULL;
 
 	tpm_info.start = pnp_mem_start(pnp_dev, 0);
@@ -906,7 +910,7 @@  static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
 	if (pnp_irq_valid(pnp_dev, 0))
 		tpm_info.irq = pnp_irq(pnp_dev, 0);
 	else
-		interrupts = false;
+		tpm_info.irq = -1;
 
 #ifdef CONFIG_ACPI
 	if (pnp_acpi_device(pnp_dev)) {
@@ -984,6 +988,7 @@  static int tpm_tis_acpi_init(struct acpi_device *acpi_dev)
 		return -ENODEV;
 
 	INIT_LIST_HEAD(&resources);
+	tpm_info.irq = -1;
 	ret = acpi_dev_get_resources(acpi_dev, &resources, tpm_check_resource,
 				     &tpm_info);
 	if (ret < 0)
@@ -991,9 +996,6 @@  static int tpm_tis_acpi_init(struct acpi_device *acpi_dev)
 
 	acpi_dev_free_resource_list(&resources);
 
-	if (!tpm_info.irq)
-		interrupts = false;
-
 	if (is_itpm(acpi_dev))
 		itpm = true;