diff mbox

[v2] tpm: vtpm_proxy: Suppresse error logging when in closed state

Message ID 1495748360-26558-1-git-send-email-stefanb@linux.vnet.ibm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Stefan Berger May 25, 2017, 9:39 p.m. UTC
Suppress the error logging when the core TPM driver sends commands
to the VTPM proxy driver and -EPIPE is returned in case the VTPM
proxy driver is 'closed' (closed anonymous file descriptor).  This
error code is only returned by the send function and by tpm_transmit
when the VTPM proxy driver is being used.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
---
 drivers/char/tpm/tpm-interface.c | 4 ++--
 drivers/char/tpm/tpm2-cmd.c      | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

Comments

Joe Perches May 25, 2017, 9:53 p.m. UTC | #1
On Thu, 2017-05-25 at 17:39 -0400, Stefan Berger wrote:
> Suppress the error logging when the core TPM driver sends commands
> to the VTPM proxy driver and -EPIPE is returned in case the VTPM
> proxy driver is 'closed' (closed anonymous file descriptor).  This
> error code is only returned by the send function and by tpm_transmit
> when the VTPM proxy driver is being used.
> 
> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
> ---
>  drivers/char/tpm/tpm-interface.c | 4 ++--
>  drivers/char/tpm/tpm2-cmd.c      | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
> index d711186..4826fcf 100644
> --- a/drivers/char/tpm/tpm-interface.c
> +++ b/drivers/char/tpm/tpm-interface.c
> @@ -429,11 +429,11 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
>  		goto out;
>  
>  	rc = chip->ops->send(chip, (u8 *) buf, count);
> -	if (rc < 0) {
> +	if (rc < 0 && rc != -EPIPE)
>  		dev_err(&chip->dev,
>  			"tpm_transmit: tpm_send: error %d\n", rc);
> +	if (rc < 0)
>  		goto out;

Perhaps this would read better as

	if (rc < 0) {
		if (rc != -EPIPE)
			dev_err(etc...);
		goto out;
	}

though for etc, perhaps
			dev_err(&chip->dev, "%s: %tpm_send: error %d\n",
				__func__, rc);

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
Jarkko Sakkinen May 25, 2017, 10:35 p.m. UTC | #2
On Thu, May 25, 2017 at 05:39:20PM -0400, Stefan Berger wrote:
> Suppress the error logging when the core TPM driver sends commands
> to the VTPM proxy driver and -EPIPE is returned in case the VTPM
> proxy driver is 'closed' (closed anonymous file descriptor).  This
> error code is only returned by the send function and by tpm_transmit
> when the VTPM proxy driver is being used.
> 
> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>

This have to hold up until some time next week as I have to make sure
that I understand that this is the right choice, which requirest to
study vtpm implementation.

I'm travelling right now.

/Jarkko

> ---
>  drivers/char/tpm/tpm-interface.c | 4 ++--
>  drivers/char/tpm/tpm2-cmd.c      | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
> index d711186..4826fcf 100644
> --- a/drivers/char/tpm/tpm-interface.c
> +++ b/drivers/char/tpm/tpm-interface.c
> @@ -429,11 +429,11 @@ ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
>  		goto out;
>  
>  	rc = chip->ops->send(chip, (u8 *) buf, count);
> -	if (rc < 0) {
> +	if (rc < 0 && rc != -EPIPE)
>  		dev_err(&chip->dev,
>  			"tpm_transmit: tpm_send: error %d\n", rc);
> +	if (rc < 0)
>  		goto out;
> -	}
>  
>  	if (chip->flags & TPM_CHIP_FLAG_IRQ)
>  		goto out_recv;
> diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
> index 3ee6883..3a99643 100644
> --- a/drivers/char/tpm/tpm2-cmd.c
> +++ b/drivers/char/tpm/tpm2-cmd.c
> @@ -840,7 +840,7 @@ void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type)
>  	/* In places where shutdown command is sent there's no much we can do
>  	 * except print the error code on a system failure.
>  	 */
> -	if (rc < 0)
> +	if (rc < 0 && rc != -EPIPE)
>  		dev_warn(&chip->dev, "transmit returned %d while stopping the TPM",
>  			 rc);
>  }
> -- 
> 2.4.3
> 

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
diff mbox

Patch

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index d711186..4826fcf 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -429,11 +429,11 @@  ssize_t tpm_transmit(struct tpm_chip *chip, struct tpm_space *space,
 		goto out;
 
 	rc = chip->ops->send(chip, (u8 *) buf, count);
-	if (rc < 0) {
+	if (rc < 0 && rc != -EPIPE)
 		dev_err(&chip->dev,
 			"tpm_transmit: tpm_send: error %d\n", rc);
+	if (rc < 0)
 		goto out;
-	}
 
 	if (chip->flags & TPM_CHIP_FLAG_IRQ)
 		goto out_recv;
diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
index 3ee6883..3a99643 100644
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -840,7 +840,7 @@  void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type)
 	/* In places where shutdown command is sent there's no much we can do
 	 * except print the error code on a system failure.
 	 */
-	if (rc < 0)
+	if (rc < 0 && rc != -EPIPE)
 		dev_warn(&chip->dev, "transmit returned %d while stopping the TPM",
 			 rc);
 }