Message ID | 1455192681-13003-1-git-send-email-ian.campbell@citrix.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
> -----Original Message----- > From: Ian Campbell [mailto:ian.campbell@citrix.com] > Sent: 11 February 2016 12:11 > To: Ian Jackson; Wei Liu; xen-devel@lists.xen.org; Stefano Stabellini > Cc: Ian Campbell; Paul Durrant; Anthony Perard > Subject: [PATCH v2] tools: probe for existence of qemu-xen stderr trace > backend. > > QEMU upstream commit ed7f5f1d8db0 ("trace: convert stderr backend to > log") renamed the "stderr" trace backend to "log", which breaks the > xen build when pointed at a QEMU tree after that point: > > ./configure of QEMU fail with: > "ERROR: invalid trace backends > Please choose supported trace backends." > > Upstream also changed, in baf86d6b3ca0 ("trace: switch default backend > to "log""), to use "log" as the default backend (previously it was > "nop"). > > Use ./scripts/tracetool.py to check for the presence of the stderr > backend and if it is present then explicitly enable it. If the stderr > backend is not present then assume a newer QEMU which defaults to > "log" and simply accept that default (there is a 1 commit window > upstream where this would result in no trace backend being enabled). > > The check is done using the older (deprecated?) --check-backend/--backend > variant of the tracetool.py options rather than the new plural > versions since the singular was supported even by very old versions of > QEMU. New QEMU has compatibility code but if/when that is removed we > will still do the right thing i.e. no explict configuiration resulting > in the upstream default (currently "log"). > > If the explicit selection of the "stderr" backend is required then it > is now done unconditionally (not depending on debug=y), which is > simpler to arrange here but also matches the newer upstream's default > to "log" which is not conditional on debug being enabled either. > > Tested with current qemu-xen-unstable (e9d8252) and current QEMU > upstream master (88c73d1), both out of tree via > QEMU_UPSTREAM_URL=/path/to/qemu-xen.git. > > Signed-off-by: Ian Campbell <ian.campbell@citrix.com> > Cc: Paul Durrant <paul.durrant@citrix.com> LGTM. Reviewed-by: Paul Durrant <paul.durrant@citrix.com> > Cc: Anthony PERARD <anthony.perard@citrix.com> > --- > v2: Just probe for stderr, otherwise assume the new upstream default > of log is what we will get anyway. Substantially rewrite commit > message. > --- > tools/Makefile | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/tools/Makefile b/tools/Makefile > index cb8652c..3f45fb9 100644 > --- a/tools/Makefile > +++ b/tools/Makefile > @@ -228,7 +228,7 @@ qemu-xen-dir-force-update: qemu-xen-dir-find > fi > > ifeq ($(debug),y) > -QEMU_XEN_ENABLE_DEBUG := --enable-debug --enable-trace- > backend=stderr > +QEMU_XEN_ENABLE_DEBUG := --enable-debug > else > QEMU_XEN_ENABLE_DEBUG := > endif > @@ -240,8 +240,14 @@ subdir-all-qemu-xen-dir: qemu-xen-dir-find > source=.; \ > fi; \ > cd qemu-xen-dir; \ > + if $$source/scripts/tracetool.py --check-backend --backend stderr ; > then \ > + enable_trace_backend='--enable-trace-backend=stderr'; \ > + else \ > + enable_trace_backend='' ; \ > + fi ; \ > $$source/configure --enable-xen --target-list=i386-softmmu \ > $(QEMU_XEN_ENABLE_DEBUG) \ > + $$enable_trace_backend \ > --prefix=$(LIBEXEC) \ > --libdir=$(LIBEXEC_LIB) \ > --includedir=$(LIBEXEC_INC) \ > -- > 2.1.4
On Thu, 11 Feb 2016, Ian Campbell wrote: > QEMU upstream commit ed7f5f1d8db0 ("trace: convert stderr backend to > log") renamed the "stderr" trace backend to "log", which breaks the > xen build when pointed at a QEMU tree after that point: > > ./configure of QEMU fail with: > "ERROR: invalid trace backends > Please choose supported trace backends." > > Upstream also changed, in baf86d6b3ca0 ("trace: switch default backend > to "log""), to use "log" as the default backend (previously it was > "nop"). > > Use ./scripts/tracetool.py to check for the presence of the stderr > backend and if it is present then explicitly enable it. If the stderr > backend is not present then assume a newer QEMU which defaults to > "log" and simply accept that default (there is a 1 commit window > upstream where this would result in no trace backend being enabled). > > The check is done using the older (deprecated?) --check-backend/--backend > variant of the tracetool.py options rather than the new plural > versions since the singular was supported even by very old versions of > QEMU. New QEMU has compatibility code but if/when that is removed we > will still do the right thing i.e. no explict configuiration resulting > in the upstream default (currently "log"). > > If the explicit selection of the "stderr" backend is required then it > is now done unconditionally (not depending on debug=y), which is > simpler to arrange here but also matches the newer upstream's default > to "log" which is not conditional on debug being enabled either. > > Tested with current qemu-xen-unstable (e9d8252) and current QEMU > upstream master (88c73d1), both out of tree via > QEMU_UPSTREAM_URL=/path/to/qemu-xen.git. > > Signed-off-by: Ian Campbell <ian.campbell@citrix.com> > Cc: Paul Durrant <paul.durrant@citrix.com> > Cc: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> > v2: Just probe for stderr, otherwise assume the new upstream default > of log is what we will get anyway. Substantially rewrite commit > message. > --- > tools/Makefile | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/tools/Makefile b/tools/Makefile > index cb8652c..3f45fb9 100644 > --- a/tools/Makefile > +++ b/tools/Makefile > @@ -228,7 +228,7 @@ qemu-xen-dir-force-update: qemu-xen-dir-find > fi > > ifeq ($(debug),y) > -QEMU_XEN_ENABLE_DEBUG := --enable-debug --enable-trace-backend=stderr > +QEMU_XEN_ENABLE_DEBUG := --enable-debug > else > QEMU_XEN_ENABLE_DEBUG := > endif > @@ -240,8 +240,14 @@ subdir-all-qemu-xen-dir: qemu-xen-dir-find > source=.; \ > fi; \ > cd qemu-xen-dir; \ > + if $$source/scripts/tracetool.py --check-backend --backend stderr ; then \ > + enable_trace_backend='--enable-trace-backend=stderr'; \ > + else \ > + enable_trace_backend='' ; \ > + fi ; \ > $$source/configure --enable-xen --target-list=i386-softmmu \ > $(QEMU_XEN_ENABLE_DEBUG) \ > + $$enable_trace_backend \ > --prefix=$(LIBEXEC) \ > --libdir=$(LIBEXEC_LIB) \ > --includedir=$(LIBEXEC_INC) \ > -- > 2.1.4 >
On Thu, Feb 11, 2016 at 12:11:21PM +0000, Ian Campbell wrote: > QEMU upstream commit ed7f5f1d8db0 ("trace: convert stderr backend to > log") renamed the "stderr" trace backend to "log", which breaks the > xen build when pointed at a QEMU tree after that point: > > ./configure of QEMU fail with: > "ERROR: invalid trace backends > Please choose supported trace backends." > > Upstream also changed, in baf86d6b3ca0 ("trace: switch default backend > to "log""), to use "log" as the default backend (previously it was > "nop"). > > Use ./scripts/tracetool.py to check for the presence of the stderr > backend and if it is present then explicitly enable it. If the stderr > backend is not present then assume a newer QEMU which defaults to > "log" and simply accept that default (there is a 1 commit window > upstream where this would result in no trace backend being enabled). > > The check is done using the older (deprecated?) --check-backend/--backend > variant of the tracetool.py options rather than the new plural > versions since the singular was supported even by very old versions of > QEMU. New QEMU has compatibility code but if/when that is removed we > will still do the right thing i.e. no explict configuiration resulting > in the upstream default (currently "log"). > > If the explicit selection of the "stderr" backend is required then it > is now done unconditionally (not depending on debug=y), which is > simpler to arrange here but also matches the newer upstream's default > to "log" which is not conditional on debug being enabled either. > > Tested with current qemu-xen-unstable (e9d8252) and current QEMU > upstream master (88c73d1), both out of tree via > QEMU_UPSTREAM_URL=/path/to/qemu-xen.git. > > Signed-off-by: Ian Campbell <ian.campbell@citrix.com> > Cc: Paul Durrant <paul.durrant@citrix.com> > Cc: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> > --- > v2: Just probe for stderr, otherwise assume the new upstream default > of log is what we will get anyway. Substantially rewrite commit > message. > --- > tools/Makefile | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/tools/Makefile b/tools/Makefile > index cb8652c..3f45fb9 100644 > --- a/tools/Makefile > +++ b/tools/Makefile > @@ -228,7 +228,7 @@ qemu-xen-dir-force-update: qemu-xen-dir-find > fi > > ifeq ($(debug),y) > -QEMU_XEN_ENABLE_DEBUG := --enable-debug --enable-trace-backend=stderr > +QEMU_XEN_ENABLE_DEBUG := --enable-debug > else > QEMU_XEN_ENABLE_DEBUG := > endif > @@ -240,8 +240,14 @@ subdir-all-qemu-xen-dir: qemu-xen-dir-find > source=.; \ > fi; \ > cd qemu-xen-dir; \ > + if $$source/scripts/tracetool.py --check-backend --backend stderr ; then \ > + enable_trace_backend='--enable-trace-backend=stderr'; \ > + else \ > + enable_trace_backend='' ; \ > + fi ; \ > $$source/configure --enable-xen --target-list=i386-softmmu \ > $(QEMU_XEN_ENABLE_DEBUG) \ > + $$enable_trace_backend \ > --prefix=$(LIBEXEC) \ > --libdir=$(LIBEXEC_LIB) \ > --includedir=$(LIBEXEC_INC) \ > -- > 2.1.4 >
On Thu, 2016-02-11 at 16:30 +0000, Wei Liu wrote: > On Thu, Feb 11, 2016 at 12:11:21PM +0000, Ian Campbell wrote: > > QEMU upstream commit ed7f5f1d8db0 ("trace: convert stderr backend to > > log") renamed the "stderr" trace backend to "log", which breaks the > > xen build when pointed at a QEMU tree after that point: > > > > ./configure of QEMU fail with: > > "ERROR: invalid trace backends > > Please choose supported trace backends." > > > > Upstream also changed, in baf86d6b3ca0 ("trace: switch default backend > > to "log""), to use "log" as the default backend (previously it was > > "nop"). > > > > Use ./scripts/tracetool.py to check for the presence of the stderr > > backend and if it is present then explicitly enable it. If the stderr > > backend is not present then assume a newer QEMU which defaults to > > "log" and simply accept that default (there is a 1 commit window > > upstream where this would result in no trace backend being enabled). > > > > The check is done using the older (deprecated?) --check-backend/ > > --backend > > variant of the tracetool.py options rather than the new plural > > versions since the singular was supported even by very old versions of > > QEMU. New QEMU has compatibility code but if/when that is removed we > > will still do the right thing i.e. no explict configuiration resulting > > in the upstream default (currently "log"). > > > > If the explicit selection of the "stderr" backend is required then it > > is now done unconditionally (not depending on debug=y), which is > > simpler to arrange here but also matches the newer upstream's default > > to "log" which is not conditional on debug being enabled either. > > > > Tested with current qemu-xen-unstable (e9d8252) and current QEMU > > upstream master (88c73d1), both out of tree via > > QEMU_UPSTREAM_URL=/path/to/qemu-xen.git. > > > > Signed-off-by: Ian Campbell <ian.campbell@citrix.com> > > Cc: Paul Durrant <paul.durrant@citrix.com> > > Cc: Anthony PERARD <anthony.perard@citrix.com> > > Acked-by: Wei Liu <wei.liu2@citrix.com> Thanks, applied.
diff --git a/tools/Makefile b/tools/Makefile index cb8652c..3f45fb9 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -228,7 +228,7 @@ qemu-xen-dir-force-update: qemu-xen-dir-find fi ifeq ($(debug),y) -QEMU_XEN_ENABLE_DEBUG := --enable-debug --enable-trace-backend=stderr +QEMU_XEN_ENABLE_DEBUG := --enable-debug else QEMU_XEN_ENABLE_DEBUG := endif @@ -240,8 +240,14 @@ subdir-all-qemu-xen-dir: qemu-xen-dir-find source=.; \ fi; \ cd qemu-xen-dir; \ + if $$source/scripts/tracetool.py --check-backend --backend stderr ; then \ + enable_trace_backend='--enable-trace-backend=stderr'; \ + else \ + enable_trace_backend='' ; \ + fi ; \ $$source/configure --enable-xen --target-list=i386-softmmu \ $(QEMU_XEN_ENABLE_DEBUG) \ + $$enable_trace_backend \ --prefix=$(LIBEXEC) \ --libdir=$(LIBEXEC_LIB) \ --includedir=$(LIBEXEC_INC) \
QEMU upstream commit ed7f5f1d8db0 ("trace: convert stderr backend to log") renamed the "stderr" trace backend to "log", which breaks the xen build when pointed at a QEMU tree after that point: ./configure of QEMU fail with: "ERROR: invalid trace backends Please choose supported trace backends." Upstream also changed, in baf86d6b3ca0 ("trace: switch default backend to "log""), to use "log" as the default backend (previously it was "nop"). Use ./scripts/tracetool.py to check for the presence of the stderr backend and if it is present then explicitly enable it. If the stderr backend is not present then assume a newer QEMU which defaults to "log" and simply accept that default (there is a 1 commit window upstream where this would result in no trace backend being enabled). The check is done using the older (deprecated?) --check-backend/--backend variant of the tracetool.py options rather than the new plural versions since the singular was supported even by very old versions of QEMU. New QEMU has compatibility code but if/when that is removed we will still do the right thing i.e. no explict configuiration resulting in the upstream default (currently "log"). If the explicit selection of the "stderr" backend is required then it is now done unconditionally (not depending on debug=y), which is simpler to arrange here but also matches the newer upstream's default to "log" which is not conditional on debug being enabled either. Tested with current qemu-xen-unstable (e9d8252) and current QEMU upstream master (88c73d1), both out of tree via QEMU_UPSTREAM_URL=/path/to/qemu-xen.git. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Paul Durrant <paul.durrant@citrix.com> Cc: Anthony PERARD <anthony.perard@citrix.com> --- v2: Just probe for stderr, otherwise assume the new upstream default of log is what we will get anyway. Substantially rewrite commit message. --- tools/Makefile | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)