diff mbox series

[V3,5/8] dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops

Message ID 1653944417-17168-6-git-send-email-olekstysh@gmail.com (mailing list archive)
State Superseded
Headers show
Series virtio: Solution to restrict memory access under Xen using xen-grant DMA-mapping layer | expand

Commit Message

Oleksandr Tyshchenko May 30, 2022, 9 p.m. UTC 
From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>

The main purpose of this binding is to communicate Xen specific
information using generic IOMMU device tree bindings (which is
a good fit here) rather than introducing a custom property.

Introduce Xen specific IOMMU for the virtualized device (e.g. virtio)
to be used by Xen grant DMA-mapping layer in the subsequent commit.

The reference to Xen specific IOMMU node using "iommus" property
indicates that Xen grant mappings need to be enabled for the device,
and it specifies the ID of the domain where the corresponding backend
resides. The domid (domain ID) is used as an argument to the Xen grant
mapping APIs.

This is needed for the option to restrict memory access using Xen grant
mappings to work which primary goal is to enable using virtio devices
in Xen guests.

Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
---
Changes RFC -> V1:
   - update commit subject/description and text in description
   - move to devicetree/bindings/arm/

Changes V1 -> V2:
   - update text in description
   - change the maintainer of the binding
   - fix validation issue
   - reference xen,dev-domid.yaml schema from virtio/mmio.yaml

Change V2 -> V3:
   - Stefano already gave his Reviewed-by, I dropped it due to the changes (significant)
   - use generic IOMMU device tree bindings instead of custom property
     "xen,dev-domid"
   - change commit subject and description, was
     "dt-bindings: Add xen,dev-domid property description for xen-grant DMA ops"
---
 .../devicetree/bindings/iommu/xen,grant-dma.yaml   | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml

Comments

Krzysztof Kozlowski May 31, 2022, 11:52 a.m. UTC | #1 
On 30/05/2022 23:00, Oleksandr Tyshchenko wrote:
> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>

Thank you for your patch. There is something to discuss/improve.

> diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
> new file mode 100644
> index 00000000..ab5765c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xen specific IOMMU for virtualized devices (e.g. virtio)
> +
> +maintainers:
> +  - Stefano Stabellini <sstabellini@kernel.org>
> +
> +description:
> +  The reference to Xen specific IOMMU node using "iommus" property indicates
> +  that Xen grant mappings need to be enabled for the device, and it specifies
> +  the ID of the domain where the corresponding backend resides.
> +  The binding is required to restrict memory access using Xen grant mappings.
> +
> +properties:
> +  compatible:
> +    const: xen,grant-dma
> +
> +  '#iommu-cells':
> +    const: 1
> +    description:
> +      Xen specific IOMMU is multiple-master IOMMU device.
> +      The single cell describes the domid (domain ID) of the domain where
> +      the backend is running.
> +
> +required:
> +  - compatible
> +  - "#iommu-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    xen_iommu {

No underscores in node names, generic node names, so this looks like
"iommu".

> +        compatible = "xen,grant-dma";
> +        #iommu-cells = <1>;
> +    };
> +
> +    virtio@3000 {
> +        compatible = "virtio,mmio";
> +        reg = <0x3000 0x100>;
> +        interrupts = <41>;
> +
> +        /* The backend is located in Xen domain with ID 1 */
> +        iommus = <&xen_iommu 1>;

There is no need usually to give consumer examples in provider binding.
If there is nothing specific here (looks exactly like every IOMMU
consumer in Linux kernel), drop the consumer.

> +    };


Best regards,
Krzysztof
Oleksandr Tyshchenko May 31, 2022, 5:09 p.m. UTC | #2 
On 31.05.22 14:52, Krzysztof Kozlowski wrote:

Hello Krzysztof

> On 30/05/2022 23:00, Oleksandr Tyshchenko wrote:
>> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
> Thank you for your patch. There is something to discuss/improve.
>
>> diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
>> new file mode 100644
>> index 00000000..ab5765c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
>> @@ -0,0 +1,49 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Xen specific IOMMU for virtualized devices (e.g. virtio)
>> +
>> +maintainers:
>> +  - Stefano Stabellini <sstabellini@kernel.org>
>> +
>> +description:
>> +  The reference to Xen specific IOMMU node using "iommus" property indicates
>> +  that Xen grant mappings need to be enabled for the device, and it specifies
>> +  the ID of the domain where the corresponding backend resides.
>> +  The binding is required to restrict memory access using Xen grant mappings.
>> +
>> +properties:
>> +  compatible:
>> +    const: xen,grant-dma
>> +
>> +  '#iommu-cells':
>> +    const: 1
>> +    description:
>> +      Xen specific IOMMU is multiple-master IOMMU device.
>> +      The single cell describes the domid (domain ID) of the domain where
>> +      the backend is running.
>> +
>> +required:
>> +  - compatible
>> +  - "#iommu-cells"
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    xen_iommu {
> No underscores in node names, generic node names, so this looks like
> "iommu".


ok, will change


>
>> +        compatible = "xen,grant-dma";
>> +        #iommu-cells = <1>;
>> +    };
>> +
>> +    virtio@3000 {
>> +        compatible = "virtio,mmio";
>> +        reg = <0x3000 0x100>;
>> +        interrupts = <41>;
>> +
>> +        /* The backend is located in Xen domain with ID 1 */
>> +        iommus = <&xen_iommu 1>;
> There is no need usually to give consumer examples in provider binding.
> If there is nothing specific here (looks exactly like every IOMMU
> consumer in Linux kernel), drop the consumer.


I got it.  There is nothing specific from the device tree's perspective, 
I was thinking to draw attention to the IOMMU specifier (in our case, 
the master device's ID == backend's domain ID). But  '#iommu-cells' 
description above already clarifies that. Will drop.


>
>> +    };
>
> Best regards,
> Krzysztof
Stefano Stabellini June 1, 2022, 12:34 a.m. UTC | #3 
On Tue, 31 May 2022, Oleksandr Tyshchenko wrote:
> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
> 
> The main purpose of this binding is to communicate Xen specific
> information using generic IOMMU device tree bindings (which is
> a good fit here) rather than introducing a custom property.
> 
> Introduce Xen specific IOMMU for the virtualized device (e.g. virtio)
> to be used by Xen grant DMA-mapping layer in the subsequent commit.
> 
> The reference to Xen specific IOMMU node using "iommus" property
> indicates that Xen grant mappings need to be enabled for the device,
> and it specifies the ID of the domain where the corresponding backend
> resides. The domid (domain ID) is used as an argument to the Xen grant
> mapping APIs.
> 
> This is needed for the option to restrict memory access using Xen grant
> mappings to work which primary goal is to enable using virtio devices
> in Xen guests.
> 
> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
> ---
> Changes RFC -> V1:
>    - update commit subject/description and text in description
>    - move to devicetree/bindings/arm/
> 
> Changes V1 -> V2:
>    - update text in description
>    - change the maintainer of the binding
>    - fix validation issue
>    - reference xen,dev-domid.yaml schema from virtio/mmio.yaml
> 
> Change V2 -> V3:
>    - Stefano already gave his Reviewed-by, I dropped it due to the changes (significant)
>    - use generic IOMMU device tree bindings instead of custom property
>      "xen,dev-domid"
>    - change commit subject and description, was
>      "dt-bindings: Add xen,dev-domid property description for xen-grant DMA ops"
> ---
>  .../devicetree/bindings/iommu/xen,grant-dma.yaml   | 49 ++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
> new file mode 100644
> index 00000000..ab5765c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xen specific IOMMU for virtualized devices (e.g. virtio)
> +
> +maintainers:
> +  - Stefano Stabellini <sstabellini@kernel.org>
> +
> +description:
> +  The reference to Xen specific IOMMU node using "iommus" property indicates
> +  that Xen grant mappings need to be enabled for the device, and it specifies
> +  the ID of the domain where the corresponding backend resides.
> +  The binding is required to restrict memory access using Xen grant mappings.

I think this is OK and in line with the discussion we had on the list. I
propose the following wording instead:

"""
The Xen IOMMU represents the Xen grant table interface. Grant mappings
are to be used with devices connected to the Xen IOMMU using the
"iommus" property, which also specifies the ID of the backend domain.
The binding is required to restrict memory access using Xen grant
mappings.
"""


> +properties:
> +  compatible:
> +    const: xen,grant-dma
> +
> +  '#iommu-cells':
> +    const: 1
> +    description:
> +      Xen specific IOMMU is multiple-master IOMMU device.
> +      The single cell describes the domid (domain ID) of the domain where
> +      the backend is running.

Here I would say:

"""
The single cell is the domid (domain ID) of the domain where the backend
is running.
"""

With the two wording improvements:

Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>


> +required:
> +  - compatible
> +  - "#iommu-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    xen_iommu {
> +        compatible = "xen,grant-dma";
> +        #iommu-cells = <1>;
> +    };
> +
> +    virtio@3000 {
> +        compatible = "virtio,mmio";
> +        reg = <0x3000 0x100>;
> +        interrupts = <41>;
> +
> +        /* The backend is located in Xen domain with ID 1 */
> +        iommus = <&xen_iommu 1>;
> +    };
> -- 
> 2.7.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
Oleksandr Tyshchenko June 1, 2022, 1:32 p.m. UTC | #4 
On 01.06.22 03:34, Stefano Stabellini wrote:

Hello Stefano

> On Tue, 31 May 2022, Oleksandr Tyshchenko wrote:
>> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
>>
>> The main purpose of this binding is to communicate Xen specific
>> information using generic IOMMU device tree bindings (which is
>> a good fit here) rather than introducing a custom property.
>>
>> Introduce Xen specific IOMMU for the virtualized device (e.g. virtio)
>> to be used by Xen grant DMA-mapping layer in the subsequent commit.
>>
>> The reference to Xen specific IOMMU node using "iommus" property
>> indicates that Xen grant mappings need to be enabled for the device,
>> and it specifies the ID of the domain where the corresponding backend
>> resides. The domid (domain ID) is used as an argument to the Xen grant
>> mapping APIs.
>>
>> This is needed for the option to restrict memory access using Xen grant
>> mappings to work which primary goal is to enable using virtio devices
>> in Xen guests.
>>
>> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
>> ---
>> Changes RFC -> V1:
>>     - update commit subject/description and text in description
>>     - move to devicetree/bindings/arm/
>>
>> Changes V1 -> V2:
>>     - update text in description
>>     - change the maintainer of the binding
>>     - fix validation issue
>>     - reference xen,dev-domid.yaml schema from virtio/mmio.yaml
>>
>> Change V2 -> V3:
>>     - Stefano already gave his Reviewed-by, I dropped it due to the changes (significant)
>>     - use generic IOMMU device tree bindings instead of custom property
>>       "xen,dev-domid"
>>     - change commit subject and description, was
>>       "dt-bindings: Add xen,dev-domid property description for xen-grant DMA ops"
>> ---
>>   .../devicetree/bindings/iommu/xen,grant-dma.yaml   | 49 ++++++++++++++++++++++
>>   1 file changed, 49 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
>> new file mode 100644
>> index 00000000..ab5765c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
>> @@ -0,0 +1,49 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Xen specific IOMMU for virtualized devices (e.g. virtio)
>> +
>> +maintainers:
>> +  - Stefano Stabellini <sstabellini@kernel.org>
>> +
>> +description:
>> +  The reference to Xen specific IOMMU node using "iommus" property indicates
>> +  that Xen grant mappings need to be enabled for the device, and it specifies
>> +  the ID of the domain where the corresponding backend resides.
>> +  The binding is required to restrict memory access using Xen grant mappings.
> I think this is OK and in line with the discussion we had on the list. I
> propose the following wording instead:
>
> """
> The Xen IOMMU represents the Xen grant table interface. Grant mappings
> are to be used with devices connected to the Xen IOMMU using the
> "iommus" property, which also specifies the ID of the backend domain.
> The binding is required to restrict memory access using Xen grant
> mappings.
> """
>
>
>> +properties:
>> +  compatible:
>> +    const: xen,grant-dma
>> +
>> +  '#iommu-cells':
>> +    const: 1
>> +    description:
>> +      Xen specific IOMMU is multiple-master IOMMU device.
>> +      The single cell describes the domid (domain ID) of the domain where
>> +      the backend is running.
> Here I would say:
>
> """
> The single cell is the domid (domain ID) of the domain where the backend
> is running.
> """
>
> With the two wording improvements:

I am happy with proposed wording improvements, will update.


>
> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>

Thanks!


>
>
>> +required:
>> +  - compatible
>> +  - "#iommu-cells"
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    xen_iommu {
>> +        compatible = "xen,grant-dma";
>> +        #iommu-cells = <1>;
>> +    };
>> +
>> +    virtio@3000 {
>> +        compatible = "virtio,mmio";
>> +        reg = <0x3000 0x100>;
>> +        interrupts = <41>;
>> +
>> +        /* The backend is located in Xen domain with ID 1 */
>> +        iommus = <&xen_iommu 1>;
>> +    };
>> -- 
>> 2.7.4
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
new file mode 100644
index 00000000..ab5765c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,49 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+  - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+  The reference to Xen specific IOMMU node using "iommus" property indicates
+  that Xen grant mappings need to be enabled for the device, and it specifies
+  the ID of the domain where the corresponding backend resides.
+  The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+  compatible:
+    const: xen,grant-dma
+
+  '#iommu-cells':
+    const: 1
+    description:
+      Xen specific IOMMU is multiple-master IOMMU device.
+      The single cell describes the domid (domain ID) of the domain where
+      the backend is running.
+
+required:
+  - compatible
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    xen_iommu {
+        compatible = "xen,grant-dma";
+        #iommu-cells = <1>;
+    };
+
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        /* The backend is located in Xen domain with ID 1 */
+        iommus = <&xen_iommu 1>;
+    };