@@ -13,12 +13,268 @@ difference is the introduction of the ``hypervisor`` node that is under the
2. Allows for the domain construction information to easily be sanitized by
simple removing the ``/chosen/hypervisor`` node.
+
+The Hypervisor node
+-------------------
+
+The ``hypervisor`` node is a top level container for the domains that will be built
+by hypervisor on start up. The node will be named ``hypervisor`` with a ``compatible``
+property to identify which hypervisors the configuration is intended. The hypervisor
+node will consist of one or more config nodes and one or more domain nodes.
+
+Properties
+""""""""""
+
+compatible
+ Identifies which hypervisors the configuration is compatible. Required.
+
+ Format: "hypervisor,<hypervisor name>", e.g "hypervisor,xen"
+
+Child Nodes
+"""""""""""
+
+* config
+* domain
+
+Config Node
+-----------
+
+A ``config`` node is for passing configuration data and identifying any boot
+modules that is of interest to the hypervisor. For example this would be where
+Xen would be informed of microcode or XSM policy locations. Each ``config``
+node will require a unique device-tree compliant name as there may be one or
+more ``config`` nodes present in a single dtb file. To identify which
+hypervisor the configuration is intended, the required ``compatible`` property
+must be present.
+
+While the config node is not meant to replace the hypervisor commandline, there
+may be cases where it is better suited for passing configuration details at
+boot time. This additional information may be carried in properties assigned
+to a ``config`` node. If there are any boot modules that are intended for the
+hypervisor, then a ``module`` child node should be provided to identify the
+boot module.
+
+Properties
+""""""""""
+
+compatible
+ Identifies the hypervisor the confiugration is intended. Required.
+
+ Format: "<hypervisor name>,config", e.g "xen,config"
+
+bootargs
+ This is used to provide the boot params for Xen.
+
+ Format: String, e.g. "flask=silo"
+
+Child Nodes
+"""""""""""
+
+* module
+
+Domain Node
+-----------
+
+A ``domain`` node is for describing the construction of a domain. Since there
+may be one or more domain nodes, each one requires a unique, DTB compliant name
+and a ``compatible`` property to identify as a domain node.
+
+A ``domain`` node may provide a ``domid`` property which will be used as the
+requested domain id for the domain with a value of “0” signifying to use the
+next available domain id, which is the default behavior if omitted. It should
+be noted that a domain configuration is not able to request a domid of “0”.
+Beyond that a domain node may have any of the following optional properties.
+
+Properties
+""""""""""
+
+compatible
+ Identifies the node as a domain node and for which hypervisor. Required.
+
+ Format: "<hypervisor name>,domain", e.g "xen,domain"
+
+domid
+ Identifies the domid requested to assign to the domain.
+
+ Format: Integer, e.g <0>
+
+permissions
+ This sets what Discretionary Access Control permissions
+ a domain is assigned. Optional, default is none.
+
+ Format: Bitfield, e.g <3> or <0x00000003>
+
+ PERMISSION_NONE (0)
+ PERMISSION_CONTROL (1 << 0)
+ PERMISSION_HARDWARE (1 << 1)
+
+functions
+ This identifies what system functions a domain will fulfill.
+ Optional, the default is none.
+
+ Format: Bitfield, e.g <3221225487> or <0xC0000007>
+
+ FUNCTION_NONE (0)
+ FUNCTION_BOOT (1 << 0)
+ FUNCTION_CRASH (1 << 1)
+ FUNCTION_CONSOLE (1 << 2)
+ FUNCTION_XENSTORE (1 << 30)
+ FUNCTION_LEGACY_DOM0 (1 << 31)
+
+.. note:: The `functions` bits that have been selected to indicate
+ ``FUNCTION_XENSTORE`` and ``FUNCTION_LEGACY_DOM0`` are the last two bits
+ (30, 31) such that should these features ever be fully replaced or retired,
+ the flags may be dropped without leaving a gap in the flag set.
+
+mode
+ The mode the domain will be executed under. Required.
+
+ Format: Bitfield, e.g <5> or <0x00000005>
+
+ MODE_PARAVIRTUALIZED (1 << 0) PV | PVH/HVM
+ MODE_ENABLE_DEVICE_MODEL (1 << 1) HVM | PVH
+ MODE_LONG (1 << 2) 64 BIT | 32 BIT
+
+domain-uuid
+ A globally unique identifier for the domain. Optional,
+ the default is NULL.
+
+ Format: Byte Array, e.g [B3 FB 98 FB 8F 9F 67 A3]
+
+cpus
+ The number of vCPUs to be assigned to the domain. Optional,
+ the default is “1”.
+
+ Format: Integer, e.g <0>
+
+memory
+ The amount of memory to assign to the domain, in KBs. This field uses a DTB
+ Reg which contains a start and size. For memory allocation start may or may
+ not have significance but size will always be used for the amount of memory
+ Required.
+
+ Format: String min:<sz> | max:<sz> | <sz>, e.g. "256M"
+
+security-id
+ The security identity to be assigned to the domain when XSM
+ is the access control mechanism being used. Optional,
+ the default is “system_u:system_r:domU_t”.
+
+ Format: string, e.g. "system_u:system_r:domU_t"
+
+Child Nodes
+"""""""""""
+
+* module
+
+Module node
+-----------
+
+This node describes a boot module loaded by the boot loader. A ``module`` node
+will often appear repeatedly and will require a unique and DTB compliant name
+for each instance. The compatible property is required to identify that the
+node is a ``module`` node, the type of boot module, and what it represents.
+
+Depending on the type of boot module, the ``module`` node will require either a
+``module-index`` or ``module-addr`` property must be present. They provide the
+boot module specific way of locating the boot module in memory.
+
+Properties
+""""""""""
+
+compatible
+ This identifies what the module is and thus what the hypervisor
+ should use the module for during domain construction. Required.
+
+ Format: "module,<module type>"[, "module,<locating type>"]
+ module type: kernel, ramdisk, device-tree, microcode, xsm-policy,
+ config
+
+ locating type: index, addr
+
+module-index
+ This identifies the index for this module when in a module chain.
+ Required for multiboot environments.
+
+ Format: Integer, e.g. <0>
+
+module-addr
+ This identifies where in memory this module is located. Required for
+ non-multiboot environments.
+
+ Format: DTB Reg <start size>, e.g. <0x0 0x20000>
+
+bootargs
+ This is used to provide the boot params to kernel modules.
+
+ Format: String, e.g. "ro quiet"
+
+.. note:: The bootargs property is intended for situations where the same kernel multiboot module is used for more than one domain.
+
Example Configuration
---------------------
-Below are two example device tree definitions for the hypervisor node. The
-first is an example of a multiboot-based configuration for x86 and the second
-is a module-based configuration for Arm.
+Below are examples device tree definitions for the hypervisor node. The first
+is an example of booting a dom0 only configuration. Afterh that are a
+multiboot-based configuration for x86 and a module-based configuration for Arm.
+
+Multiboot x86 Configuration Dom0-only:
+""""""""""""""""""""""""""""""""""""""
+The following dts file can be provided to the Device Tree compiler, ``dtc``, to
+produce a dtb file.
+::
+
+ /dts-v1/;
+
+ / {
+ chosen {
+ hypervisor {
+ compatible = "hypervisor,xen";
+
+ dom0 {
+ compatible = "xen,domain";
+
+ domid = <0>;
+
+ permissions = <3>;
+ functions = <0xC000000F>;
+ mode = <5>;
+
+ domain-uuid = [B3 FB 98 FB 8F 9F 67 A3 8A 6E 62 5A 09 13 F0 8C];
+
+ cpus = <1>;
+ memory = <0x0 0x20000000>;
+
+ kernel {
+ compatible = "module,kernel", "module,index";
+ module-index = <1>;
+ };
+ };
+
+ };
+ };
+ };
+
+The resulting dtb file, in this case dom0-only.dtb, can then be used with a
+GRUB menuentry as such,
+::
+
+ menuentry 'Devuan GNU/Linux, with Xen hyperlaunch' {
+ insmod part_gpt
+ insmod ext2
+ set root='hd0,gpt2'
+
+ echo 'Loading Xen hyperlaunch ...'
+
+ multiboot2 /xen.gz placeholder sync_console
+ echo 'Loading Dom0 hyperlaunch dtb ...'
+ module2 --nounzip /dom0-only.dtb
+ echo 'Loading Linux 5.4.36+ ...'
+ module2 /vmlinuz-5.4.36+ placeholder root=/dev/mapper/test01--vg-root ro quiet
+ echo 'Loading initial ramdisk ...'
+ module2 --nounzip /initrd.img-5.4.36+
+ }
+
Multiboot x86 Configuration:
""""""""""""""""""""""""""""
@@ -31,89 +287,70 @@ Multiboot x86 Configuration:
compatible = “hypervisor,xen”
// Configuration container
- config {
+ xen-config {
compatible = "xen,config";
- module {
- compatible = "module,microcode", "multiboot,module";
- mb-index = <1>;
+ bootargs = "console=com1,vga com1=115200,8n1 loglvl=all";
+
+ microcode {
+ compatible = "module,microcode", "module,index";
+ module-index = <1>;
};
- module {
- compatible = "module,xsm-policy", "multiboot,module";
- mb-index = <2>;
+ policy {
+ compatible = "module,xsm-policy", "module,index";
+ module-index = <2>;
};
};
// Boot Domain definition
- domain {
+ domB {
compatible = "xen,domain";
domid = <0x7FF5>;
- // FUNCTION_NONE (0)
- // FUNCTION_BOOT (1 << 0)
- // FUNCTION_CRASH (1 << 1)
- // FUNCTION_CONSOLE (1 << 2)
- // FUNCTION_XENSTORE (1 << 30)
- // FUNCTION_LEGACY_DOM0 (1 << 31)
functions = <0x00000001>;
memory = <0x0 0x20000>;
cpus = <1>;
- module {
- compatible = "module,kernel", "multiboot,module";
- mb-index = <3>;
- };
- module {
- compatible = "module,ramdisk", "multiboot,module";
- mb-index = <4>;
+ kernel {
+ compatible = "module,kernel", "module,index";
+ module-index = <3>;
};
- module {
- compatible = "module,config", "multiboot,module";
- mb-index = <5>;
+ initrd {
+ compatible = "module,ramdisk", "module,index";
+ module-index = <4>;
+ };
+ dom-config {
+ compatible = "module,config", "module,index";
+ module-index = <5>;
};
// Classic Dom0 definition
- domain {
+ dom0 {
compatible = "xen,domain";
domid = <0>;
- // PERMISSION_NONE (0)
- // PERMISSION_CONTROL (1 << 0)
- // PERMISSION_HARDWARE (1 << 1)
permissions = <3>;
-
- // FUNCTION_NONE (0)
- // FUNCTION_BOOT (1 << 0)
- // FUNCTION_CRASH (1 << 1)
- // FUNCTION_CONSOLE (1 << 2)
- // FUNCTION_XENSTORE (1 << 30)
- // FUNCTION_LEGACY_DOM0 (1 << 31)
functions = <0xC0000006>;
-
- // MODE_PARAVIRTUALIZED (1 << 0) /* PV | PVH/HVM */
- // MODE_ENABLE_DEVICE_MODEL (1 << 1) /* HVM | PVH */
- // MODE_LONG (1 << 2) /* 64 BIT | 32 BIT */
mode = <5>; /* 64 BIT, PV */
- // UUID
domain-uuid = [B3 FB 98 FB 8F 9F 67 A3];
cpus = <1>;
memory = <0x0 0x20000>;
- security-id = “dom0_t;
+ security-id = “system_u:system_r:dom0_t;
- module {
- compatible = "module,kernel", "multiboot,module";
- mb-index = <6>;
+ kernel {
+ compatible = "module,kernel", "module,index";
+ module-index = <6>;
bootargs = "console=hvc0";
};
- module {
- compatible = "module,ramdisk", "multiboot,module";
- mb-index = <7>;
+ initrd {
+ compatible = "module,ramdisk", "module,index";
+ module-index = <7>;
};
};
@@ -137,89 +374,68 @@ Module Arm Configuration:
compatible = “hypervisor,xen”
// Configuration container
- config {
+ xen-config {
compatible = "xen,config";
- module {
- compatible = "module,microcode”;
+ microcode {
+ compatible = "module,microcode”,"module,addr";
module-addr = <0x0000ff00 0x80>;
};
- module {
- compatible = "module,xsm-policy";
+ policy {
+ compatible = "module,xsm-policy","module,addr";
module-addr = <0x0000ff00 0x80>;
};
};
// Boot Domain definition
- domain {
+ domB {
compatible = "xen,domain";
domid = <0x7FF5>;
- // FUNCTION_NONE (0)
- // FUNCTION_BOOT (1 << 0)
- // FUNCTION_CRASH (1 << 1)
- // FUNCTION_CONSOLE (1 << 2)
- // FUNCTION_XENSTORE (1 << 30)
- // FUNCTION_LEGACY_DOM0 (1 << 31)
functions = <0x00000001>;
memory = <0x0 0x20000>;
cpus = <1>;
- module {
- compatible = "module,kernel";
+
+ kernel {
+ compatible = "module,kernel","module,addr";
module-addr = <0x0000ff00 0x80>;
};
-
- module {
- compatible = "module,ramdisk";
+ initrd {
+ compatible = "module,ramdisk","module,addr";
module-addr = <0x0000ff00 0x80>;
};
- module {
- compatible = "module,config";
+ dom-config {
+ compatible = "module,config","module,addr";
module-addr = <0x0000ff00 0x80>;
};
// Classic Dom0 definition
- domain@0 {
+ dom0 {
compatible = "xen,domain";
domid = <0>;
- // PERMISSION_NONE (0)
- // PERMISSION_CONTROL (1 << 0)
- // PERMISSION_HARDWARE (1 << 1)
permissions = <3>;
-
- // FUNCTION_NONE (0)
- // FUNCTION_BOOT (1 << 0)
- // FUNCTION_CRASH (1 << 1)
- // FUNCTION_CONSOLE (1 << 2)
- // FUNCTION_XENSTORE (1 << 30)
- // FUNCTION_LEGACY_DOM0 (1 << 31)
functions = <0xC0000006>;
-
- // MODE_PARAVIRTUALIZED (1 << 0) /* PV | PVH/HVM */
- // MODE_ENABLE_DEVICE_MODEL (1 << 1) /* HVM | PVH */
- // MODE_LONG (1 << 2) /* 64 BIT | 32 BIT */
mode = <5>; /* 64 BIT, PV */
- // UUID
domain-uuid = [B3 FB 98 FB 8F 9F 67 A3];
cpus = <1>;
memory = <0x0 0x20000>;
- security-id = “dom0_t”;
+ security-id = “system_u:system_r:dom0_t”;
- module {
- compatible = "module,kernel";
+ kernel {
+ compatible = "module,kernel","module,addr";
module-addr = <0x0000ff00 0x80>;
bootargs = "console=hvc0";
};
- module {
- compatible = "module,ramdisk";
+ intird {
+ compatible = "module,ramdisk","module,addr";
module-addr = <0x0000ff00 0x80>;
};
};
@@ -240,104 +456,3 @@ provided to Xen using the standard method currently in use. The remaining
modules would need to be loaded in the respective addresses specified in the
`module-addr` property.
-
-The Hypervisor node
--------------------
-
-The hypervisor node is a top level container for the domains that will be built
-by hypervisor on start up. On the ``hypervisor`` node the ``compatible``
-property is used to identify the type of hypervisor node present..
-
-compatible
- Identifies the type of node. Required.
-
-The Config node
----------------
-
-A config node is for detailing any modules that are of interest to Xen itself.
-For example this would be where Xen would be informed of microcode or XSM
-policy locations. If the modules are multiboot modules and are able to be
-located by index within the module chain, the ``mb-index`` property should be
-used to specify the index in the multiboot module chain.. If the module will be
-located by physical memory address, then the ``module-addr`` property should be
-used to identify the location and size of the module.
-
-compatible
- Identifies the type of node. Required.
-
-The Domain node
----------------
-
-A domain node is for describing the construction of a domain. It may provide a
-domid property which will be used as the requested domain id for the domain
-with a value of “0” signifying to use the next available domain id, which is
-the default behavior if omitted. A domain configuration is not able to request
-a domid of “0”. After that a domain node may have any of the following
-parameters,
-
-compatible
- Identifies the type of node. Required.
-
-domid
- Identifies the domid requested to assign to the domain. Required.
-
-permissions
- This sets what Discretionary Access Control permissions
- a domain is assigned. Optional, default is none.
-
-functions
- This identifies what system functions a domain will fulfill.
- Optional, the default is none.
-
-.. note:: The `functions` bits that have been selected to indicate
- ``FUNCTION_XENSTORE`` and ``FUNCTION_LEGACY_DOM0`` are the last two bits
- (30, 31) such that should these features ever be fully retired, the flags may
- be dropped without leaving a gap in the flag set.
-
-mode
- The mode the domain will be executed under. Required.
-
-domain-uuid
- A globally unique identifier for the domain. Optional,
- the default is NULL.
-
-cpus
- The number of vCPUs to be assigned to the domain. Optional,
- the default is “1”.
-
-memory
- The amount of memory to assign to the domain, in KBs.
- Required.
-
-security-id
- The security identity to be assigned to the domain when XSM
- is the access control mechanism being used. Optional,
- the default is “domu_t”.
-
-The Module node
----------------
-
-This node describes a boot module loaded by the boot loader. The required
-compatible property follows the format: module,<type> where type can be
-“kernel”, “ramdisk”, “device-tree”, “microcode”, “xsm-policy” or “config”. In
-the case the module is a multiboot module, the additional property string
-“multiboot,module” may be present. One of two properties is required and
-identifies how to locate the module. They are the mb-index, used for multiboot
-modules, and the module-addr for memory address based location.
-
-compatible
- This identifies what the module is and thus what the hypervisor
- should use the module for during domain construction. Required.
-
-mb-index
- This identifies the index for this module in the multiboot module chain.
- Required for multiboot environments.
-
-module-addr
- This identifies where in memory this module is located. Required for
- non-multiboot environments.
-
-bootargs
- This is used to provide the boot params to kernel modules.
-
-.. note:: The bootargs property is intended for situations where the same kernel multiboot module is used for more than one domain.