diff mbox series

[v5,4/5] xen/arm64: mm: Rework switch_ttbr()

Message ID 20230127195508.2786-5-julien@xen.org (mailing list archive)
State Superseded
Headers show
Series xen/arm: Don't switch TTBR while the MMU is on | expand

Commit Message

Julien Grall Jan. 27, 2023, 7:55 p.m. UTC
From: Julien Grall <jgrall@amazon.com>

At the moment, switch_ttbr() is switching the TTBR whilst the MMU is
still on.

Switching TTBR is like replacing existing mappings with new ones. So
we need to follow the break-before-make sequence.

In this case, it means the MMU needs to be switched off while the
TTBR is updated. In order to disable the MMU, we need to first
jump to an identity mapping.

Rename switch_ttbr() to switch_ttbr_id() and create an helper on
top to temporary map the identity mapping and call switch_ttbr()
via the identity address.

switch_ttbr_id() is now reworked to temporarily turn off the MMU
before updating the TTBR.

We also need to make sure the helper switch_ttbr() is part of the
identity mapping. So move _end_boot past it.

The arm32 code will use a different approach. So this issue is for now
only resolved on arm64.

Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com>

---
    Changes in v5:
        - Add a newline in switch_ttbr()
        - Add Luca's reviewed-by and tested-by

    Changes in v4:
        - Don't modify setup_pagetables() as we don't handle arm32.
        - Move the clearing of the boot page tables in an earlier patch
        - Fix the numbering

    Changes in v2:
        - Remove the arm32 changes. This will be addressed differently
        - Re-instate the instruct cache flush. This is not strictly
          necessary but kept it for safety.
        - Use "dsb ish"  rather than "dsb sy".


    TODO:
        * Handle the case where the runtime Xen is loaded at a different
          position for cache coloring. This will be dealt separately.
---
 xen/arch/arm/arm64/head.S     | 50 +++++++++++++++++++++++------------
 xen/arch/arm/arm64/mm.c       | 31 ++++++++++++++++++++++
 xen/arch/arm/include/asm/mm.h |  2 ++
 xen/arch/arm/mm.c             |  2 --
 4 files changed, 66 insertions(+), 19 deletions(-)

Comments

Michal Orzel Jan. 30, 2023, 9:17 a.m. UTC | #1
Hi Julien,

On 27/01/2023 20:55, Julien Grall wrote:
> 
> 
> From: Julien Grall <jgrall@amazon.com>
> 
> At the moment, switch_ttbr() is switching the TTBR whilst the MMU is
> still on.
> 
> Switching TTBR is like replacing existing mappings with new ones. So
> we need to follow the break-before-make sequence.
> 
> In this case, it means the MMU needs to be switched off while the
> TTBR is updated. In order to disable the MMU, we need to first
> jump to an identity mapping.
> 
> Rename switch_ttbr() to switch_ttbr_id() and create an helper on
> top to temporary map the identity mapping and call switch_ttbr()
> via the identity address.
> 
> switch_ttbr_id() is now reworked to temporarily turn off the MMU
> before updating the TTBR.
> 
> We also need to make sure the helper switch_ttbr() is part of the
> identity mapping. So move _end_boot past it.
> 
> The arm32 code will use a different approach. So this issue is for now
> only resolved on arm64.
> 
> Signed-off-by: Julien Grall <jgrall@amazon.com>
> Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
> Tested-by: Luca Fancellu <luca.fancellu@arm.com>

Reviewed-by: Michal Orzel <michal.orzel@amd.com>

~Michal
Bertrand Marquis Jan. 30, 2023, 10:42 a.m. UTC | #2
Hi Julien,

On 27 Jan 2023, at 20:55, Julien Grall <julien@xen.org> wrote:

From: Julien Grall <jgrall@amazon.com>

At the moment, switch_ttbr() is switching the TTBR whilst the MMU is
still on.

Switching TTBR is like replacing existing mappings with new ones. So
we need to follow the break-before-make sequence.

In this case, it means the MMU needs to be switched off while the
TTBR is updated. In order to disable the MMU, we need to first
jump to an identity mapping.

Rename switch_ttbr() to switch_ttbr_id() and create an helper on
top to temporary map the identity mapping and call switch_ttbr()
via the identity address.

switch_ttbr_id() is now reworked to temporarily turn off the MMU
before updating the TTBR.

We also need to make sure the helper switch_ttbr() is part of the
identity mapping. So move _end_boot past it.

The arm32 code will use a different approach. So this issue is for now
only resolved on arm64.

Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com>

Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com<mailto:bertrand.marquis@arm.com>>

Cheers
Bertrand
diff mbox series

Patch

diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 663f5813b12e..5efd442b24af 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -816,30 +816,46 @@  ENDPROC(fail)
  * Switch TTBR
  *
  * x0    ttbr
- *
- * TODO: This code does not comply with break-before-make.
  */
-ENTRY(switch_ttbr)
-        dsb   sy                     /* Ensure the flushes happen before
-                                      * continuing */
-        isb                          /* Ensure synchronization with previous
-                                      * changes to text */
-        tlbi   alle2                 /* Flush hypervisor TLB */
-        ic     iallu                 /* Flush I-cache */
-        dsb    sy                    /* Ensure completion of TLB flush */
+ENTRY(switch_ttbr_id)
+        /* 1) Ensure any previous read/write have completed */
+        dsb    ish
+        isb
+
+        /* 2) Turn off MMU */
+        mrs    x1, SCTLR_EL2
+        bic    x1, x1, #SCTLR_Axx_ELx_M
+        msr    SCTLR_EL2, x1
+        isb
+
+        /*
+         * 3) Flush the TLBs.
+         * See asm/arm64/flushtlb.h for the explanation of the sequence.
+         */
+        dsb   nshst
+        tlbi  alle2
+        dsb   nsh
+        isb
+
+        /* 4) Update the TTBR */
+        msr   TTBR0_EL2, x0
         isb
 
-        msr    TTBR0_EL2, x0
+        /*
+         * 5) Flush I-cache
+         * This should not be necessary but it is kept for safety.
+         */
+        ic     iallu
+        isb
 
-        isb                          /* Ensure synchronization with previous
-                                      * changes to text */
-        tlbi   alle2                 /* Flush hypervisor TLB */
-        ic     iallu                 /* Flush I-cache */
-        dsb    sy                    /* Ensure completion of TLB flush */
+        /* 6) Turn on the MMU */
+        mrs   x1, SCTLR_EL2
+        orr   x1, x1, #SCTLR_Axx_ELx_M  /* Enable MMU */
+        msr   SCTLR_EL2, x1
         isb
 
         ret
-ENDPROC(switch_ttbr)
+ENDPROC(switch_ttbr_id)
 
 #ifdef CONFIG_EARLY_PRINTK
 /*
diff --git a/xen/arch/arm/arm64/mm.c b/xen/arch/arm/arm64/mm.c
index f8e0887d25bc..efcd5e70ecf6 100644
--- a/xen/arch/arm/arm64/mm.c
+++ b/xen/arch/arm/arm64/mm.c
@@ -120,6 +120,37 @@  void update_identity_mapping(bool enable)
     BUG_ON(rc);
 }
 
+extern void switch_ttbr_id(uint64_t ttbr);
+
+typedef void (switch_ttbr_fn)(uint64_t ttbr);
+
+void __init switch_ttbr(uint64_t ttbr)
+{
+    vaddr_t id_addr = virt_to_maddr(switch_ttbr_id);
+    switch_ttbr_fn *fn = (switch_ttbr_fn *)id_addr;
+    lpae_t pte;
+
+    /* Enable the identity mapping in the boot page tables */
+    update_identity_mapping(true);
+
+    /* Enable the identity mapping in the runtime page tables */
+    pte = pte_of_xenaddr((vaddr_t)switch_ttbr_id);
+    pte.pt.table = 1;
+    pte.pt.xn = 0;
+    pte.pt.ro = 1;
+    write_pte(&xen_third_id[third_table_offset(id_addr)], pte);
+
+    /* Switch TTBR */
+    fn(ttbr);
+
+    /*
+     * Disable the identity mapping in the runtime page tables.
+     * Note it is not necessary to disable it in the boot page tables
+     * because they are not going to be used by this CPU anymore.
+     */
+    update_identity_mapping(false);
+}
+
 /*
  * Local variables:
  * mode: C
diff --git a/xen/arch/arm/include/asm/mm.h b/xen/arch/arm/include/asm/mm.h
index 23dec574eb31..4262165ce25e 100644
--- a/xen/arch/arm/include/asm/mm.h
+++ b/xen/arch/arm/include/asm/mm.h
@@ -207,6 +207,8 @@  extern unsigned long total_pages;
 extern void setup_pagetables(unsigned long boot_phys_offset);
 /* Map FDT in boot pagetable */
 extern void *early_fdt_map(paddr_t fdt_paddr);
+/* Switch to a new root page-tables */
+extern void switch_ttbr(uint64_t ttbr);
 /* Remove early mappings */
 extern void remove_early_mappings(void);
 /* Allocate and initialise pagetables for a secondary CPU. Sets init_ttbr to the
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index e95843d88f37..0b2d31cc5d6c 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -476,8 +476,6 @@  static void xen_pt_enforce_wnx(void)
     flush_xen_tlb_local();
 }
 
-extern void switch_ttbr(uint64_t ttbr);
-
 /* Clear a translation table and clean & invalidate the cache */
 static void clear_table(void *table)
 {