@@ -113,8 +113,8 @@ static void kzm_init(MachineState *machine)
alias_offset += ram[i].size;
}
- if (nd_table[0].used) {
- lan9118_init(&nd_table[0], KZM_LAN9118_ADDR,
+ if (qemu_find_nic_info("lan9118", true, NULL)) {
+ lan9118_init(KZM_LAN9118_ADDR,
qdev_get_gpio_in(DEVICE(&s->soc.avic), 52));
}
@@ -458,7 +458,7 @@ static void mps2_common_init(MachineState *machine)
/* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
- lan9118_init(&nd_table[0], mmc->ethernet_base,
+ lan9118_init(mmc->ethernet_base,
qdev_get_gpio_in(armv7m,
mmc->fpga_type == FPGA_AN511 ? 47 : 13));
@@ -84,7 +84,6 @@ static void realview_init(MachineState *machine,
SysBusDevice *busdev;
qemu_irq pic[64];
PCIBus *pci_bus = NULL;
- NICInfo *nd;
DriveInfo *dinfo;
I2CBus *i2c;
int n;
@@ -295,10 +294,9 @@ static void realview_init(MachineState *machine,
}
}
- nd = qemu_find_nic_info(is_pb ? "lan9118" : "smc91c111", true, NULL);
- if (nd) {
+ if (qemu_find_nic_info(is_pb ? "lan9118" : "smc91c111", true, NULL)) {
if (is_pb) {
- lan9118_init(nd, 0x4e000000, pic[28]);
+ lan9118_init(0x4e000000, pic[28]);
} else {
smc91c111_init(0x4e000000, pic[28]);
}
@@ -686,8 +686,8 @@ static void vexpress_common_init(MachineState *machine)
memory_region_add_subregion(sysmem, map[VE_VIDEORAM], &vms->vram);
/* 0x4e000000 LAN9118 Ethernet */
- if (nd_table[0].used) {
- lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]);
+ if (qemu_find_nic_info("lan9118", true, NULL)) {
+ lan9118_init(map[VE_ETHERNET], pic[15]);
}
/* VE_USB: not modelled */
@@ -1407,14 +1407,13 @@ static void lan9118_register_types(void)
/* Legacy helper function. Should go away when machine config files are
implemented. */
-void lan9118_init(NICInfo *nd, uint32_t base, qemu_irq irq)
+void lan9118_init(uint32_t base, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
- qemu_check_nic_model(nd, "lan9118");
dev = qdev_new(TYPE_LAN9118);
- qdev_set_nic_properties(dev, nd);
+ qemu_configure_nic_device(dev, true, NULL);
s = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(s, &error_fatal);
sysbus_mmio_map(s, 0, base);
@@ -15,6 +15,6 @@
#define TYPE_LAN9118 "lan9118"
-void lan9118_init(NICInfo *, uint32_t, qemu_irq);
+void lan9118_init(uint32_t, qemu_irq);
#endif