diff mbox series

[v7,2/2] x86/time: prefer CMOS over EFI_GET_TIME

Message ID 20240913075907.34460-3-roger.pau@citrix.com (mailing list archive)
State New
Headers show
Series x86/time: improvements to wallclock logic | expand

Commit Message

Roger Pau Monné Sept. 13, 2024, 7:59 a.m. UTC
The EFI_GET_TIME implementation is well known to be broken for many firmware
implementations, for Xen the result on such implementations are:

----[ Xen-4.19-unstable  x86_64  debug=y  Tainted:   C    ]----
CPU:    0
RIP:    e008:[<0000000062ccfa70>] 0000000062ccfa70
[...]
Xen call trace:
   [<0000000062ccfa70>] R 0000000062ccfa70
   [<00000000732e9a3f>] S 00000000732e9a3f
   [<ffff82d04034f34f>] F arch/x86/time.c#get_cmos_time+0x1b3/0x26e
   [<ffff82d04045926f>] F init_xen_time+0x28/0xa4
   [<ffff82d040454bc4>] F __start_xen+0x1ee7/0x2578
   [<ffff82d040203334>] F __high_start+0x94/0xa0

Pagetable walk from 0000000062ccfa70:
 L4[0x000] = 000000207ef1c063 ffffffffffffffff
 L3[0x001] = 000000005d6c0063 ffffffffffffffff
 L2[0x116] = 8000000062c001e3 ffffffffffffffff (PSE)

****************************************
Panic on CPU 0:
FATAL PAGE FAULT
[error_code=0011]
Faulting linear address: 0000000062ccfa70
****************************************

Swap the preference to default to CMOS first, and EFI later, in an attempt to
use EFI_GET_TIME as a last resort option only.  Note that Linux for example
doesn't allow calling the get_time method, and instead provides a dummy handler
that unconditionally returns EFI_UNSUPPORTED on x86-64.

Such change in the preferences requires some re-arranging of the function
logic, so that panic messages with workaround suggestions are suitably printed.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
---
Changes since v2:
 - Updated to match previous changes.
---
 xen/arch/x86/time.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Andrew Cooper Sept. 16, 2024, 1:14 p.m. UTC | #1
On 13/09/2024 8:59 am, Roger Pau Monne wrote:
> The EFI_GET_TIME implementation is well known to be broken for many firmware
> implementations, for Xen the result on such implementations are:
>
> ----[ Xen-4.19-unstable  x86_64  debug=y  Tainted:   C    ]----
> CPU:    0
> RIP:    e008:[<0000000062ccfa70>] 0000000062ccfa70
> [...]
> Xen call trace:
>    [<0000000062ccfa70>] R 0000000062ccfa70
>    [<00000000732e9a3f>] S 00000000732e9a3f
>    [<ffff82d04034f34f>] F arch/x86/time.c#get_cmos_time+0x1b3/0x26e
>    [<ffff82d04045926f>] F init_xen_time+0x28/0xa4
>    [<ffff82d040454bc4>] F __start_xen+0x1ee7/0x2578
>    [<ffff82d040203334>] F __high_start+0x94/0xa0
>
> Pagetable walk from 0000000062ccfa70:
>  L4[0x000] = 000000207ef1c063 ffffffffffffffff
>  L3[0x001] = 000000005d6c0063 ffffffffffffffff
>  L2[0x116] = 8000000062c001e3 ffffffffffffffff (PSE)
>
> ****************************************
> Panic on CPU 0:
> FATAL PAGE FAULT
> [error_code=0011]
> Faulting linear address: 0000000062ccfa70
> ****************************************
>
> Swap the preference to default to CMOS first, and EFI later, in an attempt to
> use EFI_GET_TIME as a last resort option only.  Note that Linux for example
> doesn't allow calling the get_time method, and instead provides a dummy handler
> that unconditionally returns EFI_UNSUPPORTED on x86-64.
>
> Such change in the preferences requires some re-arranging of the function
> logic, so that panic messages with workaround suggestions are suitably printed.
>
> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>

Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>

This brings us better-in-line with the rest of the world on the matter.

~Andrew
Marek Marczykowski-Górecki Sept. 17, 2024, 11 a.m. UTC | #2
On Fri, Sep 13, 2024 at 09:59:07AM +0200, Roger Pau Monne wrote:
> The EFI_GET_TIME implementation is well known to be broken for many firmware
> implementations, for Xen the result on such implementations are:
> 
> ----[ Xen-4.19-unstable  x86_64  debug=y  Tainted:   C    ]----
> CPU:    0
> RIP:    e008:[<0000000062ccfa70>] 0000000062ccfa70
> [...]
> Xen call trace:
>    [<0000000062ccfa70>] R 0000000062ccfa70
>    [<00000000732e9a3f>] S 00000000732e9a3f
>    [<ffff82d04034f34f>] F arch/x86/time.c#get_cmos_time+0x1b3/0x26e
>    [<ffff82d04045926f>] F init_xen_time+0x28/0xa4
>    [<ffff82d040454bc4>] F __start_xen+0x1ee7/0x2578
>    [<ffff82d040203334>] F __high_start+0x94/0xa0
> 
> Pagetable walk from 0000000062ccfa70:
>  L4[0x000] = 000000207ef1c063 ffffffffffffffff
>  L3[0x001] = 000000005d6c0063 ffffffffffffffff
>  L2[0x116] = 8000000062c001e3 ffffffffffffffff (PSE)
> 
> ****************************************
> Panic on CPU 0:
> FATAL PAGE FAULT
> [error_code=0011]
> Faulting linear address: 0000000062ccfa70
> ****************************************
> 
> Swap the preference to default to CMOS first, and EFI later, in an attempt to
> use EFI_GET_TIME as a last resort option only.  Note that Linux for example
> doesn't allow calling the get_time method, and instead provides a dummy handler
> that unconditionally returns EFI_UNSUPPORTED on x86-64.
> 
> Such change in the preferences requires some re-arranging of the function
> logic, so that panic messages with workaround suggestions are suitably printed.
> 
> Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>

Since this changes behavior for running on EFI,
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

> ---
> Changes since v2:
>  - Updated to match previous changes.
> ---
>  xen/arch/x86/time.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/xen/arch/x86/time.c b/xen/arch/x86/time.c
> index e4751684951e..b86e4d58b40c 100644
> --- a/xen/arch/x86/time.c
> +++ b/xen/arch/x86/time.c
> @@ -1592,14 +1592,14 @@ static void __init probe_wallclock(void)
>          wallclock_source = WALLCLOCK_XEN;
>          return;
>      }
> -    if ( efi_enabled(EFI_RS) && efi_get_time() )
> +    if ( cmos_rtc_probe() )
>      {
> -        wallclock_source = WALLCLOCK_EFI;
> +        wallclock_source = WALLCLOCK_CMOS;
>          return;
>      }
> -    if ( cmos_rtc_probe() )
> +    if ( efi_enabled(EFI_RS) && efi_get_time() )
>      {
> -        wallclock_source = WALLCLOCK_CMOS;
> +        wallclock_source = WALLCLOCK_EFI;
>          return;
>      }
>  
> -- 
> 2.46.0
>
diff mbox series

Patch

diff --git a/xen/arch/x86/time.c b/xen/arch/x86/time.c
index e4751684951e..b86e4d58b40c 100644
--- a/xen/arch/x86/time.c
+++ b/xen/arch/x86/time.c
@@ -1592,14 +1592,14 @@  static void __init probe_wallclock(void)
         wallclock_source = WALLCLOCK_XEN;
         return;
     }
-    if ( efi_enabled(EFI_RS) && efi_get_time() )
+    if ( cmos_rtc_probe() )
     {
-        wallclock_source = WALLCLOCK_EFI;
+        wallclock_source = WALLCLOCK_CMOS;
         return;
     }
-    if ( cmos_rtc_probe() )
+    if ( efi_enabled(EFI_RS) && efi_get_time() )
     {
-        wallclock_source = WALLCLOCK_CMOS;
+        wallclock_source = WALLCLOCK_EFI;
         return;
     }