diff mbox series

[v2,5/5] x86/pvh: Avoid absolute symbol references in .head.text

Message ID 20240930071513.909462-12-ardb+git@google.com (mailing list archive)
State Superseded
Headers show
Series x86/xen: Drop absolute references from startup code | expand

Commit Message

Ard Biesheuvel Sept. 30, 2024, 7:15 a.m. UTC 
From: Ard Biesheuvel <ardb@kernel.org>

The .head.text section contains code that may execute from a different
address than it was linked at. This is fragile, given that the x86 ABI
can refer to global symbols via absolute or relative references, and the
toolchain assumes that these are interchangeable, which they are not in
this particular case.

For this reason, all absolute symbol references are being removed from
code that is emitted into .head.text. Subsequently, build time
validation may be added that ensures that no absolute ELF relocations
exist at all in that ELF section.

In the case of the PVH code, the absolute references are in 32-bit code,
which gets emitted with R_X86_64_32 relocations, and these are even more
problematic going forward, as it prevents running the linker in PIE
mode.

So update the 64-bit code to avoid _pa(), and to only rely on relative
symbol references: these are always 32-bits wide, even in 64-bit code,
and are resolved by the linker at build time.

Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Tested-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 arch/x86/platform/pvh/head.S | 30 ++++++++++++--------
 1 file changed, 18 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/arch/x86/platform/pvh/head.S b/arch/x86/platform/pvh/head.S
index 2b0d887e0872..cf89b2385c5a 100644
--- a/arch/x86/platform/pvh/head.S
+++ b/arch/x86/platform/pvh/head.S
@@ -6,7 +6,9 @@ 
 
 	.code32
 	.text
+#ifdef CONFIG_X86_32
 #define _pa(x)          ((x) - __START_KERNEL_map)
+#endif
 #define rva(x)          ((x) - pvh_start_xen)
 
 #include <linux/elfnote.h>
@@ -72,8 +74,7 @@  SYM_CODE_START(pvh_start_xen)
 	movl $0, %esp
 
 	leal rva(gdt)(%ebp), %eax
-	leal rva(gdt_start)(%ebp), %ecx
-	movl %ecx, 2(%eax)
+	addl %eax, 2(%eax)
 	lgdt (%eax)
 
 	mov $PVH_DS_SEL,%eax
@@ -103,10 +104,23 @@  SYM_CODE_START(pvh_start_xen)
 	btsl $_EFER_LME, %eax
 	wrmsr
 
+	/*
+	 * Reuse the non-relocatable symbol emitted for the ELF note to
+	 * subtract the build time physical address of pvh_start_xen() from
+	 * its actual runtime address, without relying on absolute 32-bit ELF
+	 * relocations, as these are not supported by the linker when running
+	 * in -pie mode, and should be avoided in .head.text in general.
+	 */
 	mov %ebp, %ebx
-	subl $_pa(pvh_start_xen), %ebx /* offset */
+	subl rva(xen_elfnote_phys32_entry)(%ebp), %ebx
 	jz .Lpagetable_done
 
+	/*
+	 * Store the resulting load offset in phys_base.  __pa() needs
+	 * phys_base set to calculate the hypercall page in xen_pvh_init().
+	 */
+	movl %ebx, rva(phys_base)(%ebp)
+
 	/* Fixup page-tables for relocation. */
 	leal rva(pvh_init_top_pgt)(%ebp), %edi
 	movl $PTRS_PER_PGD, %ecx
@@ -165,14 +179,6 @@  SYM_CODE_START(pvh_start_xen)
 	xor %edx, %edx
 	wrmsr
 
-	/*
-	 * Calculate load offset and store in phys_base.  __pa() needs
-	 * phys_base set to calculate the hypercall page in xen_pvh_init().
-	 */
-	movq %rbp, %rbx
-	subq $_pa(pvh_start_xen), %rbx
-	movq %rbx, phys_base(%rip)
-
 	/* Call xen_prepare_pvh() via the kernel virtual mapping */
 	leaq xen_prepare_pvh(%rip), %rax
 	subq phys_base(%rip), %rax
@@ -218,7 +224,7 @@  SYM_CODE_END(pvh_start_xen)
 	.balign 8
 SYM_DATA_START_LOCAL(gdt)
 	.word gdt_end - gdt_start - 1
-	.long _pa(gdt_start) /* x86-64 will overwrite if relocated. */
+	.long gdt_start - gdt
 	.word 0
 SYM_DATA_END(gdt)
 SYM_DATA_START_LOCAL(gdt_start)