diff mbox series

[v2,2/2] xen/arm: platform: Add Raspberry Pi platform

Message ID 2473fc46a8229bb2434a90a510136202e7479177.1564371527.git.stewart.hildebrand@dornerworks.com (mailing list archive)
State New, archived
Headers show
Series Raspberry Pi 4 support | expand

Commit Message

Stewart Hildebrand July 29, 2019, 1:19 p.m. UTC
The aux peripherals (uart1, spi1, and spi2) share an IRQ and a page of
memory. For debugging, it is helpful to use the aux UART in Xen. In
this case, Xen would try to assign spi1 and spi2 to dom0, but this
results in an error since the shared IRQ was already assigned to Xen.
Blacklist aux devices other than the UART to prevent mapping the shared
IRQ and memory range to dom0.

Signed-off-by: Stewart Hildebrand <stewart.hildebrand@dornerworks.com>
---
 xen/arch/arm/platforms/Makefile            |  1 +
 xen/arch/arm/platforms/brcm-raspberry-pi.c | 55 ++++++++++++++++++++++
 2 files changed, 56 insertions(+)
 create mode 100644 xen/arch/arm/platforms/brcm-raspberry-pi.c

Comments

Julien Grall July 31, 2019, 12:03 p.m. UTC | #1
Hi Stewart,

On 29/07/2019 14:19, Stewart Hildebrand wrote:
> The aux peripherals (uart1, spi1, and spi2) share an IRQ and a page of
> memory. For debugging, it is helpful to use the aux UART in Xen. In
> this case, Xen would try to assign spi1 and spi2 to dom0, but this
> results in an error since the shared IRQ was already assigned to Xen.
> Blacklist aux devices other than the UART to prevent mapping the shared
> IRQ and memory range to dom0.

Reading the commit message, it is unclear what's the impact on blacklist spi1 
and spi2. Could you expand it?

The rest of the patch looks good.

Cheers,
Stewart Hildebrand July 31, 2019, 1:55 p.m. UTC | #2
On Wednesday, July 31, 2019 8:04 AM, Julien Grall <julien.grall@arm.com> wrote:
>Hi Stewart,

Hi Julien

>On 29/07/2019 14:19, Stewart Hildebrand wrote:
>> The aux peripherals (uart1, spi1, and spi2) share an IRQ and a page of
>> memory. For debugging, it is helpful to use the aux UART in Xen. In
>> this case, Xen would try to assign spi1 and spi2 to dom0, but this
>> results in an error since the shared IRQ was already assigned to Xen.
>> Blacklist aux devices other than the UART to prevent mapping the shared
>> IRQ and memory range to dom0.
>
>Reading the commit message, it is unclear what's the impact on blacklist spi1
>and spi2. Could you expand it?

Yes, good thinking. What do you think about the following (the first paragraph is unchanged, just copied for completeness):

"The aux peripherals (uart1, spi1, and spi2) share an IRQ and a page of
memory. For debugging, it is helpful to use the aux UART in Xen. In
this case, Xen would try to assign spi1 and spi2 to dom0, but this
results in an error since the shared IRQ was already assigned to Xen.
Blacklist aux devices other than the UART to prevent mapping the shared
IRQ and memory range to dom0.

Blacklisting spi1 and spi2 unfortunately makes those peripherals
unavailable for use in the system. Future work could include forwarding
the IRQ for spi1 and spi2, and trap and mediate access to the memory
range for spi1 and spi2."

Would you like me to re-send the patch, or can the message be updated on commit?

Stew

>The rest of the patch looks good.
>
>Cheers,
>
>--
>Julien Grall
Julien Grall July 31, 2019, 2:42 p.m. UTC | #3
Hi,

On 31/07/2019 14:55, Stewart Hildebrand wrote:
> On Wednesday, July 31, 2019 8:04 AM, Julien Grall <julien.grall@arm.com> wrote:
>> Hi Stewart,
> 
> Hi Julien
> 
>> On 29/07/2019 14:19, Stewart Hildebrand wrote:
>>> The aux peripherals (uart1, spi1, and spi2) share an IRQ and a page of
>>> memory. For debugging, it is helpful to use the aux UART in Xen. In
>>> this case, Xen would try to assign spi1 and spi2 to dom0, but this
>>> results in an error since the shared IRQ was already assigned to Xen.
>>> Blacklist aux devices other than the UART to prevent mapping the shared
>>> IRQ and memory range to dom0.
>>
>> Reading the commit message, it is unclear what's the impact on blacklist spi1
>> and spi2. Could you expand it?
> 
> Yes, good thinking. What do you think about the following (the first paragraph is unchanged, just copied for completeness):
> 
> "The aux peripherals (uart1, spi1, and spi2) share an IRQ and a page of
> memory. For debugging, it is helpful to use the aux UART in Xen. In
> this case, Xen would try to assign spi1 and spi2 to dom0, but this
> results in an error since the shared IRQ was already assigned to Xen.
> Blacklist aux devices other than the UART to prevent mapping the shared
> IRQ and memory range to dom0.
> 
> Blacklisting spi1 and spi2 unfortunately makes those peripherals
> unavailable for use in the system. Future work could include forwarding
> the IRQ for spi1 and spi2, and trap and mediate access to the memory
> range for spi1 and spi2."

Ok, so they are not critical to boot Dom0. Good :).

Hopefully they will learn the lesson for the next generation!

> 
> Would you like me to re-send the patch, or can the message be updated on commit?

No, I will update the commit message and commit it later on today.

With the new commit message:

Acked-by: Julien Grall <julien.grall@arm.com>

Cheers,
diff mbox series

Patch

diff --git a/xen/arch/arm/platforms/Makefile b/xen/arch/arm/platforms/Makefile
index 01608f89ee..8632f4115f 100644
--- a/xen/arch/arm/platforms/Makefile
+++ b/xen/arch/arm/platforms/Makefile
@@ -8,5 +8,6 @@  obj-$(CONFIG_ALL64_PLAT) += seattle.o
 obj-$(CONFIG_ALL_PLAT)   += sunxi.o
 obj-$(CONFIG_ALL64_PLAT) += thunderx.o
 obj-$(CONFIG_ALL64_PLAT) += xgene-storm.o
+obj-$(CONFIG_ALL64_PLAT) += brcm-raspberry-pi.o
 obj-$(CONFIG_MPSOC_PLATFORM)  += xilinx-zynqmp.o
 obj-$(CONFIG_MPSOC_PLATFORM)  += xilinx-zynqmp-eemi.o
diff --git a/xen/arch/arm/platforms/brcm-raspberry-pi.c b/xen/arch/arm/platforms/brcm-raspberry-pi.c
new file mode 100644
index 0000000000..e22d2b3184
--- /dev/null
+++ b/xen/arch/arm/platforms/brcm-raspberry-pi.c
@@ -0,0 +1,55 @@ 
+/*
+ * xen/arch/arm/platforms/brcm-raspberry-pi.c
+ *
+ * Raspberry Pi 4 Platform specific settings.
+ *
+ * Stewart Hildebrand <stewart.hildebrand@dornerworks.com>
+ * Copyright (c) 2019 DornerWorks, Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/platform.h>
+
+static const char *const brcm_bcm2838_dt_compat[] __initconst =
+{
+    "brcm,bcm2838",
+    NULL
+};
+
+static const struct dt_device_match brcm_bcm2838_blacklist_dev[] __initconst =
+{
+    /*
+     * The aux SPIs share an IRQ and a page with the aux UART.
+     * If the same page gets mapped to dom0 and Xen, there is risk of
+     * dom0 writing to the UART that Xen controls.
+     */
+    DT_MATCH_COMPATIBLE("brcm,bcm2835-aux-spi"),
+    /*
+     * The aux peripheral also shares a page with the aux UART.
+     */
+    DT_MATCH_COMPATIBLE("brcm,bcm2835-aux"),
+    { /* sentinel */ },
+};
+
+PLATFORM_START(brcm_bcm2838, "Raspberry Pi 4")
+    .compatible     = brcm_bcm2838_dt_compat,
+    .blacklist_dev  = brcm_bcm2838_blacklist_dev,
+PLATFORM_END
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */