diff mbox series

[v5] ns16550: Add ACPI support for ARM only

Message ID 5E532442.1040401@hisilicon.com (mailing list archive)
State New, archived
Headers show
Series [v5] ns16550: Add ACPI support for ARM only | expand

Commit Message

Wei Xu Feb. 24, 2020, 1:17 a.m. UTC
Parse the ACPI SPCR table and initialize the 16550 compatible serial port
for ARM only. Currently we only support one UART on ARM. Some fields
which we do not care yet on ARM are ignored.

Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien@xen.org>

---
Changes in v5:
- check the serial port address space before checking the address

Changes in v4:
- change the print when the serial port address is 0
- check the serial port address space id before initializing
- change the comment for the ignored PCIe fields

Changes in v3:
- address the code style comments from Jan
- use container_of to do cast
- list all fields we ignored
- check the console redirection is disabled or not before init the uart
- init the uart io_size and width via spcr->serial_port

Changes in v2:
- improve commit message
- remove the spcr initialization
- add comments for the uart initialization and configuration
- adjust the code style issue
- limit the code only built on ACPI and ARM
---
 xen/drivers/char/ns16550.c | 79 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

Comments

Julien Grall Feb. 24, 2020, 10:09 a.m. UTC | #1
Hi Wei,

On 24/02/2020 01:17, Wei Xu wrote:
> Parse the ACPI SPCR table and initialize the 16550 compatible serial port
> for ARM only. Currently we only support one UART on ARM. Some fields
> which we do not care yet on ARM are ignored.
> 
> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
> Reviewed-by: Jan Beulich <jbeulich@suse.com>

I don't think Jan gave an explicit reviewed-by for this patch. However...

> Acked-by: Julien Grall <julien@xen.org>
> 
> ---
> Changes in v5:
> - check the serial port address space before checking the address

... version 4 of this patch has already been merged. So can you send a 
follow-up to re-order the check?

Best regards,
Wei Xu Feb. 24, 2020, 11:07 a.m. UTC | #2
Hi Julien,

On 2020/2/24 18:09, Julien Grall wrote:
> Hi Wei,
> 
> On 24/02/2020 01:17, Wei Xu wrote:
>> Parse the ACPI SPCR table and initialize the 16550 compatible serial port
>> for ARM only. Currently we only support one UART on ARM. Some fields
>> which we do not care yet on ARM are ignored.
>>
>> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
>> Reviewed-by: Jan Beulich <jbeulich@suse.com>
> 
> I don't think Jan gave an explicit reviewed-by for this patch. However...

Sorry, I misunderstood it.

> 
>> Acked-by: Julien Grall <julien@xen.org>
>>
>> ---
>> Changes in v5:
>> - check the serial port address space before checking the address
> 
> ... version 4 of this patch has already been merged. So can you send a follow-up to re-order the check?

I will send a follow-up to re-order it.
Thanks!

Best Regards,
Wei

> 
> Best regards,
>
diff mbox series

Patch

diff --git a/xen/drivers/char/ns16550.c b/xen/drivers/char/ns16550.c
index aa87c57..425e044 100644
--- a/xen/drivers/char/ns16550.c
+++ b/xen/drivers/char/ns16550.c
@@ -1620,6 +1620,85 @@  DT_DEVICE_START(ns16550, "NS16550 UART", DEVICE_SERIAL)
 DT_DEVICE_END

 #endif /* HAS_DEVICE_TREE */
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_ARM)
+#include <xen/acpi.h>
+
+static int __init ns16550_acpi_uart_init(const void *data)
+{
+    struct acpi_table_header *table;
+    struct acpi_table_spcr *spcr;
+    acpi_status status;
+    /*
+     * Same as the DT part.
+     * Only support one UART on ARM which happen to be ns16550_com[0].
+     */
+    struct ns16550 *uart = &ns16550_com[0];
+
+    status = acpi_get_table(ACPI_SIG_SPCR, 0, &table);
+    if ( ACPI_FAILURE(status) )
+    {
+        printk("ns16550: Failed to get SPCR table\n");
+        return -EINVAL;
+    }
+
+    spcr = container_of(table, struct acpi_table_spcr, header);
+
+    if ( unlikely(spcr->serial_port.space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) )
+    {
+        printk("ns16550: Address space type is not mmio\n");
+        return -EINVAL;
+    }
+
+    /*
+     * The serial port address may be 0 for example
+     * if the console redirection is disabled.
+     */
+    if ( unlikely(!spcr->serial_port.address) )
+    {
+        printk("ns16550: Console redirection is disabled\n");
+        return -EINVAL;
+    }
+
+    ns16550_init_common(uart);
+
+    /*
+     * The baud rate is pre-configured by the firmware.
+     * And currently the ACPI part is only targeting ARM so the flow_control
+     * field and all PCI related ones which we do not care yet are ignored.
+     */
+    uart->baud = BAUD_AUTO;
+    uart->data_bits = 8;
+    uart->parity = spcr->parity;
+    uart->stop_bits = spcr->stop_bits;
+    uart->io_base = spcr->serial_port.address;
+    uart->io_size = spcr->serial_port.bit_width;
+    uart->reg_shift = spcr->serial_port.bit_offset;
+    uart->reg_width = spcr->serial_port.access_width;
+
+    /* The trigger/polarity information is not available in spcr. */
+    irq_set_type(spcr->interrupt, IRQ_TYPE_LEVEL_HIGH);
+    uart->irq = spcr->interrupt;
+
+    uart->vuart.base_addr = uart->io_base;
+    uart->vuart.size = uart->io_size;
+    uart->vuart.data_off = UART_THR << uart->reg_shift;
+    uart->vuart.status_off = UART_LSR << uart->reg_shift;
+    uart->vuart.status = UART_LSR_THRE | UART_LSR_TEMT;
+
+    /* Register with generic serial driver. */
+    serial_register_uart(SERHND_DTUART, &ns16550_driver, uart);
+
+    return 0;
+}
+
+ACPI_DEVICE_START(ans16550, "NS16550 UART", DEVICE_SERIAL)
+    .class_type = ACPI_DBG2_16550_COMPATIBLE,
+    .init = ns16550_acpi_uart_init,
+ACPI_DEVICE_END
+
+#endif /* CONFIG_ACPI && CONFIG_ARM */
+
 /*
  * Local variables:
  * mode: C