| Message ID | Zp--KHAFuDVnH1Oq@mail-itl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Assertion failed at arch/x86/genapic/x2apic.c:38 on S3 resume nested in KVM on AMD | expand |
On 23.07.2024 16:28, Marek Marczykowski-Górecki wrote: > I'm observing a crash like the one below when trying to resume from S3. > It happens on Xen nested in KVM (QEMU 9.0, Linux 6.9.3) but only on AMD. > The very same software stack on Intel works just fine. QEMU is running > with "-cpu host,+svm,+invtsc -machine q35,kernel-irqchip=split -device > amd-iommu,intremap=on -smp 2" among others. > > (XEN) Preparing system for ACPI S3 state. > (XEN) Disabling non-boot CPUs ... > (XEN) Broke affinity for IRQ1, new: {0-1} > (XEN) Broke affinity for IRQ20, new: {0-1} > (XEN) Broke affinity for IRQ22, new: {0-1} > (XEN) Entering ACPI S3 state. > (XEN) Finishing wakeup from ACPI S3 state. > (XEN) Enabling non-boot CPUs ... > (XEN) Assertion 'cpumask_test_cpu(this_cpu, per_cpu(cluster_cpus, this_cpu))' failed at arch/x86/genapic/x2apic.c:38 > (XEN) ----[ Xen-4.20 x86_64 debug=y Not tainted ]---- > (XEN) CPU: 1 > (XEN) RIP: e008:[<ffff82d04028862b>] x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9 > (XEN) RFLAGS: 0000000000010096 CONTEXT: hypervisor > (XEN) rax: ffff830278a25f50 rbx: 0000000000000001 rcx: ffff82d0405e1700 > (XEN) rdx: 0000003233412000 rsi: ffff8302739da2d8 rdi: 0000000000000000 > (XEN) rbp: 00000000000000c8 rsp: ffff8302739d7e78 r8: 0000000000000001 > (XEN) r9: ffff8302739d7fa0 r10: 0000000000000001 r11: 0000000000000000 > (XEN) r12: 0000000000000001 r13: 0000000000000001 r14: 0000000000000000 > (XEN) r15: 0000000000000000 cr0: 000000008005003b cr4: 00000000007506e0 > (XEN) cr3: 000000007fa7a000 cr2: 0000000000000000 > (XEN) fsb: 0000000000000000 gsb: 0000000000000000 gss: 0000000000000000 > (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 > (XEN) Xen code around <ffff82d04028862b> (x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9): > (XEN) cf 82 ff ff eb b7 0f 0b <0f> 0b 48 8d 05 9c fc 33 00 48 8b 0d a5 0a 35 00 > (XEN) Xen stack trace from rsp=ffff8302739d7e78: > (XEN) 0000000000000000 00000000000000c8 0000000000000001 0000000000000001 > (XEN) 0000000000000000 ffff82d0402f1d83 ffff8302739d7fff 00000000000000c8 > (XEN) 0000000000000001 0000000000000001 ffff82d04031adb9 0000000000000001 > (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff82d040276677 > (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > (XEN) ffff88810037c000 0000000000000001 0000000000000246 deadbeefdeadf00d > (XEN) 0000000000000001 aaaaaaaaaaaaaaaa 0000000000000000 ffffffff811d130a > (XEN) deadbeefdeadf00d deadbeefdeadf00d deadbeefdeadf00d 0000010000000000 > (XEN) ffffffff811d130a 000000000000e033 0000000000000246 ffffc900400b3ef8 > (XEN) 000000000000e02b 000000000000beef 000000000000beef 000000000000beef > (XEN) 000000000000beef 0000e01000000001 ffff8302739de000 0000003233412000 > (XEN) 00000000007506e0 0000000000000000 0000000000000000 0000000200000000 > (XEN) 0000000000000002 > (XEN) Xen call trace: > (XEN) [<ffff82d04028862b>] R x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9 > (XEN) [<ffff82d0402f1d83>] S setup_local_APIC+0x26/0x449 > (XEN) [<ffff82d04031adb9>] S start_secondary+0x1c4/0x37a > (XEN) [<ffff82d040276677>] S __high_start+0x87/0xd0 > (XEN) > (XEN) > (XEN) **************************************** > (XEN) Panic on CPU 1: > (XEN) Assertion 'cpumask_test_cpu(this_cpu, per_cpu(cluster_cpus, this_cpu))' failed at arch/x86/genapic/x2apic.c:38 > (XEN) **************************************** Would you mind giving the patch below a try? Jan x86/x2APIC: correct cluster tracking upon CPUs going down for S3 Downing CPUs for S3 is somewhat special: Since we can expect the system to come back up in exactly the same hardware configuration, per-CPU data for the secondary CPUs isn't de-allocated (and then cleared upon re- allocation when the CPUs are being brought back up). Therefore the cluster_cpus per-CPU pointer will retain its value for all CPUs other than the final one in a cluster (i.e. in particular for all CPUs in the same cluster as CPU0). That, however, is in conflict with the assertion early in init_apic_ldr_x2apic_cluster(). Note that the issue is avoided on Intel hardware, where we park CPUs instead of bringing them down. Extend the bypassing of the freeing to the suspend case, thus making suspend/resume also a tiny bit faster. Fixes: 2e6c8f182c9c ("x86: distinguish CPU offlining from CPU removal") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> --- a/xen/arch/x86/genapic/x2apic.c +++ b/xen/arch/x86/genapic/x2apic.c @@ -228,7 +228,8 @@ static int cf_check update_clusterinfo( case CPU_UP_CANCELED: case CPU_DEAD: case CPU_REMOVE: - if ( park_offline_cpus == (action != CPU_REMOVE) ) + if ( park_offline_cpus == (action != CPU_REMOVE) || + system_state == SYS_STATE_suspend ) break; if ( per_cpu(cluster_cpus, cpu) ) {
On Thu, Aug 08, 2024 at 01:22:30PM +0200, Jan Beulich wrote: > On 23.07.2024 16:28, Marek Marczykowski-Górecki wrote: > > I'm observing a crash like the one below when trying to resume from S3. > > It happens on Xen nested in KVM (QEMU 9.0, Linux 6.9.3) but only on AMD. > > The very same software stack on Intel works just fine. QEMU is running > > with "-cpu host,+svm,+invtsc -machine q35,kernel-irqchip=split -device > > amd-iommu,intremap=on -smp 2" among others. > > > > (XEN) Preparing system for ACPI S3 state. > > (XEN) Disabling non-boot CPUs ... > > (XEN) Broke affinity for IRQ1, new: {0-1} > > (XEN) Broke affinity for IRQ20, new: {0-1} > > (XEN) Broke affinity for IRQ22, new: {0-1} > > (XEN) Entering ACPI S3 state. > > (XEN) Finishing wakeup from ACPI S3 state. > > (XEN) Enabling non-boot CPUs ... > > (XEN) Assertion 'cpumask_test_cpu(this_cpu, per_cpu(cluster_cpus, this_cpu))' failed at arch/x86/genapic/x2apic.c:38 > > (XEN) ----[ Xen-4.20 x86_64 debug=y Not tainted ]---- > > (XEN) CPU: 1 > > (XEN) RIP: e008:[<ffff82d04028862b>] x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9 > > (XEN) RFLAGS: 0000000000010096 CONTEXT: hypervisor > > (XEN) rax: ffff830278a25f50 rbx: 0000000000000001 rcx: ffff82d0405e1700 > > (XEN) rdx: 0000003233412000 rsi: ffff8302739da2d8 rdi: 0000000000000000 > > (XEN) rbp: 00000000000000c8 rsp: ffff8302739d7e78 r8: 0000000000000001 > > (XEN) r9: ffff8302739d7fa0 r10: 0000000000000001 r11: 0000000000000000 > > (XEN) r12: 0000000000000001 r13: 0000000000000001 r14: 0000000000000000 > > (XEN) r15: 0000000000000000 cr0: 000000008005003b cr4: 00000000007506e0 > > (XEN) cr3: 000000007fa7a000 cr2: 0000000000000000 > > (XEN) fsb: 0000000000000000 gsb: 0000000000000000 gss: 0000000000000000 > > (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 > > (XEN) Xen code around <ffff82d04028862b> (x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9): > > (XEN) cf 82 ff ff eb b7 0f 0b <0f> 0b 48 8d 05 9c fc 33 00 48 8b 0d a5 0a 35 00 > > (XEN) Xen stack trace from rsp=ffff8302739d7e78: > > (XEN) 0000000000000000 00000000000000c8 0000000000000001 0000000000000001 > > (XEN) 0000000000000000 ffff82d0402f1d83 ffff8302739d7fff 00000000000000c8 > > (XEN) 0000000000000001 0000000000000001 ffff82d04031adb9 0000000000000001 > > (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff82d040276677 > > (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > > (XEN) ffff88810037c000 0000000000000001 0000000000000246 deadbeefdeadf00d > > (XEN) 0000000000000001 aaaaaaaaaaaaaaaa 0000000000000000 ffffffff811d130a > > (XEN) deadbeefdeadf00d deadbeefdeadf00d deadbeefdeadf00d 0000010000000000 > > (XEN) ffffffff811d130a 000000000000e033 0000000000000246 ffffc900400b3ef8 > > (XEN) 000000000000e02b 000000000000beef 000000000000beef 000000000000beef > > (XEN) 000000000000beef 0000e01000000001 ffff8302739de000 0000003233412000 > > (XEN) 00000000007506e0 0000000000000000 0000000000000000 0000000200000000 > > (XEN) 0000000000000002 > > (XEN) Xen call trace: > > (XEN) [<ffff82d04028862b>] R x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9 > > (XEN) [<ffff82d0402f1d83>] S setup_local_APIC+0x26/0x449 > > (XEN) [<ffff82d04031adb9>] S start_secondary+0x1c4/0x37a > > (XEN) [<ffff82d040276677>] S __high_start+0x87/0xd0 > > (XEN) > > (XEN) > > (XEN) **************************************** > > (XEN) Panic on CPU 1: > > (XEN) Assertion 'cpumask_test_cpu(this_cpu, per_cpu(cluster_cpus, this_cpu))' failed at arch/x86/genapic/x2apic.c:38 > > (XEN) **************************************** > > Would you mind giving the patch below a try? Yes, this seems to fix the issue, thanks! > Jan > > x86/x2APIC: correct cluster tracking upon CPUs going down for S3 > > Downing CPUs for S3 is somewhat special: Since we can expect the system > to come back up in exactly the same hardware configuration, per-CPU data > for the secondary CPUs isn't de-allocated (and then cleared upon re- > allocation when the CPUs are being brought back up). Therefore the > cluster_cpus per-CPU pointer will retain its value for all CPUs other > than the final one in a cluster (i.e. in particular for all CPUs in the > same cluster as CPU0). That, however, is in conflict with the assertion > early in init_apic_ldr_x2apic_cluster(). > > Note that the issue is avoided on Intel hardware, where we park CPUs > instead of bringing them down. I wonder why I don't hit this issue on baremetal AMD, only on nested. Anyway, Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> > Extend the bypassing of the freeing to the suspend case, thus making > suspend/resume also a tiny bit faster. > > Fixes: 2e6c8f182c9c ("x86: distinguish CPU offlining from CPU removal") > Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> > Signed-off-by: Jan Beulich <jbeulich@suse.com> > > --- a/xen/arch/x86/genapic/x2apic.c > +++ b/xen/arch/x86/genapic/x2apic.c > @@ -228,7 +228,8 @@ static int cf_check update_clusterinfo( > case CPU_UP_CANCELED: > case CPU_DEAD: > case CPU_REMOVE: > - if ( park_offline_cpus == (action != CPU_REMOVE) ) > + if ( park_offline_cpus == (action != CPU_REMOVE) || > + system_state == SYS_STATE_suspend ) > break; > if ( per_cpu(cluster_cpus, cpu) ) > { > >
On 08.08.2024 15:19, Marek Marczykowski-Górecki wrote: > On Thu, Aug 08, 2024 at 01:22:30PM +0200, Jan Beulich wrote: >> x86/x2APIC: correct cluster tracking upon CPUs going down for S3 >> >> Downing CPUs for S3 is somewhat special: Since we can expect the system >> to come back up in exactly the same hardware configuration, per-CPU data >> for the secondary CPUs isn't de-allocated (and then cleared upon re- >> allocation when the CPUs are being brought back up). Therefore the >> cluster_cpus per-CPU pointer will retain its value for all CPUs other >> than the final one in a cluster (i.e. in particular for all CPUs in the >> same cluster as CPU0). That, however, is in conflict with the assertion >> early in init_apic_ldr_x2apic_cluster(). >> >> Note that the issue is avoided on Intel hardware, where we park CPUs >> instead of bringing them down. > > I wonder why I don't hit this issue on baremetal AMD, only on nested. Different clustering arrangements? > Anyway, > > Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Great, thanks. Jan
diff --git a/xen/arch/x86/genapic/x2apic.c b/xen/arch/x86/genapic/x2apic.c index 371dd100c742..fe8e664e1b63 100644 --- a/xen/arch/x86/genapic/x2apic.c +++ b/xen/arch/x86/genapic/x2apic.c @@ -30,8 +30,11 @@ static inline u32 x2apic_cluster(unsigned int cpu) static void cf_check init_apic_ldr_x2apic_cluster(void) { unsigned int cpu, this_cpu = smp_processor_id(); + uint32_t id = apic_read(APIC_ID); + uint32_t ldr = apic_read(APIC_LDR); - per_cpu(cpu_2_logical_apicid, this_cpu) = apic_read(APIC_LDR); + ASSERT(x2apic_ldr_from_id(id) == ldr); + per_cpu(cpu_2_logical_apicid, this_cpu) = ldr; if ( per_cpu(cluster_cpus, this_cpu) ) { diff --git a/xen/arch/x86/hvm/vlapic.c b/xen/arch/x86/hvm/vlapic.c index 9cfc82666ae5..2a010a6363b7 100644 --- a/xen/arch/x86/hvm/vlapic.c +++ b/xen/arch/x86/hvm/vlapic.c @@ -1064,11 +1064,6 @@ static const struct hvm_mmio_ops vlapic_mmio_ops = { .write = vlapic_mmio_write, }; -static uint32_t x2apic_ldr_from_id(uint32_t id) -{ - return ((id & ~0xf) << 12) | (1 << (id & 0xf)); -} - static void set_x2apic_id(struct vlapic *vlapic) { const struct vcpu *v = vlapic_vcpu(vlapic); diff --git a/xen/arch/x86/include/asm/apic.h b/xen/arch/x86/include/asm/apic.h index 7b5a0832c05e..8a892fa2fa5b 100644 --- a/xen/arch/x86/include/asm/apic.h +++ b/xen/arch/x86/include/asm/apic.h @@ -148,6 +148,11 @@ static inline void ack_APIC_irq(void) apic_write(APIC_EOI, 0); } +static inline uint32_t x2apic_ldr_from_id(uint32_t id) +{ + return ((id & ~0xf) << 12) | (1 << (id & 0xf)); +} + extern int get_maxlvt(void); extern void clear_local_APIC(void); extern void connect_bsp_APIC (void);
Hi, I'm observing a crash like the one below when trying to resume from S3. It happens on Xen nested in KVM (QEMU 9.0, Linux 6.9.3) but only on AMD. The very same software stack on Intel works just fine. QEMU is running with "-cpu host,+svm,+invtsc -machine q35,kernel-irqchip=split -device amd-iommu,intremap=on -smp 2" among others. (XEN) Preparing system for ACPI S3 state. (XEN) Disabling non-boot CPUs ... (XEN) Broke affinity for IRQ1, new: {0-1} (XEN) Broke affinity for IRQ20, new: {0-1} (XEN) Broke affinity for IRQ22, new: {0-1} (XEN) Entering ACPI S3 state. (XEN) Finishing wakeup from ACPI S3 state. (XEN) Enabling non-boot CPUs ... (XEN) Assertion 'cpumask_test_cpu(this_cpu, per_cpu(cluster_cpus, this_cpu))' failed at arch/x86/genapic/x2apic.c:38 (XEN) ----[ Xen-4.20 x86_64 debug=y Not tainted ]---- (XEN) CPU: 1 (XEN) RIP: e008:[<ffff82d04028862b>] x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9 (XEN) RFLAGS: 0000000000010096 CONTEXT: hypervisor (XEN) rax: ffff830278a25f50 rbx: 0000000000000001 rcx: ffff82d0405e1700 (XEN) rdx: 0000003233412000 rsi: ffff8302739da2d8 rdi: 0000000000000000 (XEN) rbp: 00000000000000c8 rsp: ffff8302739d7e78 r8: 0000000000000001 (XEN) r9: ffff8302739d7fa0 r10: 0000000000000001 r11: 0000000000000000 (XEN) r12: 0000000000000001 r13: 0000000000000001 r14: 0000000000000000 (XEN) r15: 0000000000000000 cr0: 000000008005003b cr4: 00000000007506e0 (XEN) cr3: 000000007fa7a000 cr2: 0000000000000000 (XEN) fsb: 0000000000000000 gsb: 0000000000000000 gss: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 (XEN) Xen code around <ffff82d04028862b> (x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9): (XEN) cf 82 ff ff eb b7 0f 0b <0f> 0b 48 8d 05 9c fc 33 00 48 8b 0d a5 0a 35 00 (XEN) Xen stack trace from rsp=ffff8302739d7e78: (XEN) 0000000000000000 00000000000000c8 0000000000000001 0000000000000001 (XEN) 0000000000000000 ffff82d0402f1d83 ffff8302739d7fff 00000000000000c8 (XEN) 0000000000000001 0000000000000001 ffff82d04031adb9 0000000000000001 (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff82d040276677 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) ffff88810037c000 0000000000000001 0000000000000246 deadbeefdeadf00d (XEN) 0000000000000001 aaaaaaaaaaaaaaaa 0000000000000000 ffffffff811d130a (XEN) deadbeefdeadf00d deadbeefdeadf00d deadbeefdeadf00d 0000010000000000 (XEN) ffffffff811d130a 000000000000e033 0000000000000246 ffffc900400b3ef8 (XEN) 000000000000e02b 000000000000beef 000000000000beef 000000000000beef (XEN) 000000000000beef 0000e01000000001 ffff8302739de000 0000003233412000 (XEN) 00000000007506e0 0000000000000000 0000000000000000 0000000200000000 (XEN) 0000000000000002 (XEN) Xen call trace: (XEN) [<ffff82d04028862b>] R x2apic.c#init_apic_ldr_x2apic_cluster+0x8a/0x1b9 (XEN) [<ffff82d0402f1d83>] S setup_local_APIC+0x26/0x449 (XEN) [<ffff82d04031adb9>] S start_secondary+0x1c4/0x37a (XEN) [<ffff82d040276677>] S __high_start+0x87/0xd0 (XEN) (XEN) (XEN) **************************************** (XEN) Panic on CPU 1: (XEN) Assertion 'cpumask_test_cpu(this_cpu, per_cpu(cluster_cpus, this_cpu))' failed at arch/x86/genapic/x2apic.c:38 (XEN) **************************************** On a release build, it hits "BUG" later on in the same file. I've tested the attached patch from Roger, but that assertion didn't fail (or it crashed before reaching that part).