| Message ID | 0bdbc18a-e062-9d39-2d01-75a0480c692e@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | xfs: fix mounting failed caused by sequencing problem ,in the log records | expand |
diff --git a/repair/scan.c b/repair/scan.c index 7b720131..b5458eb8 100644 --- a/repair/scan.c +++ b/repair/scan.c @@ -185,7 +185,7 @@ scan_lbtree( ASSERT(dirty == 0 || (dirty && !no_modify)); - if ((dirty || badcrc) && !no_modify) { + if (!err && (dirty || badcrc) && !no_modify) { libxfs_buf_mark_dirty(bp); libxfs_buf_relse(bp); }
We found an issue where repair failed in the fault injection. $ xfs_repair test.img ... Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 Metadata CRC error detected at 0x55a30e420c7d, xfs_bmbt block 0x51d68/0x1000 - agno = 3 Metadata CRC error detected at 0x55a30e420c7d, xfs_bmbt block 0x51d68/0x1000 btree block 0/41901 is suspect, error -74 bad magic # 0x58534c4d in inode 3306572 (data fork) bmbt block 41901 bad data fork in inode 3306572 cleared inode 3306572 ... Phase 7 - verify and correct link counts... Metadata corruption detected at 0x55a30e420b58, xfs_bmbt block 0x51d68/0x1000 libxfs_bwrite: write verifier failed on xfs_bmbt bno 0x51d68/0x8 xfs_repair: Releasing dirty buffer to free list! xfs_repair: Refusing to write a corrupt buffer to the data device! xfs_repair: Lost a write to the data device! fatal error -- File system metadata writeout failed, err=117. Re-run xfs_repair. $ xfs_db test.img xfs_db> inode 3306572 xfs_db> p core.magic = 0x494e core.mode = 0100666 // regular file core.version = 3 core.format = 3 (btree) ... u3.bmbt.keys[1] = [startoff] 1:[6] u3.bmbt.ptrs[1] = 41901 // btree root ... $ hexdump -C -n 4096 41901.img 00000000 58 53 4c 4d 00 00 00 00 00 00 01 e8 d6 f4 03 14 |XSLM............| 00000010 09 f3 a6 1b 0a 3c 45 5a 96 39 41 ac 09 2f 66 99 |.....<EZ.9A../f.| 00000020 00 00 00 00 00 05 1f fb 00 00 00 00 00 05 1d 68 |...............h| ... The block data associated with inode 3306572 is abnormal, but check the CRC first when reading. If the CRC check fails, badcrc will be set. Then the dirty flag will be set on bp when badcrc is set. In the final stage of repair, the dirty bp will be refreshed in batches. When refresh to the disk, the data in bp will be verified. At this time, if the data verification fails, resulting in a repair error. After scan_bmapbt returns an error, the inode will be cleaned up. Then bp doesn't need to set dirty flag, so that it won't trigger writeback verification failure. Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com> --- repair/scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)