new file mode 100755
@@ -0,0 +1,108 @@
+#! /bin/bash
+# FS QA Test No. 873
+#
+# See how well xfs_fsr handles "defragging" a file with a hojillion extents.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+_require_test_program "punch-alternating"
+_require_command "$XFS_FSR_PROG" "xfs_fsr"
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+testdir="$SCRATCH_MNT/test-$seq"
+mkdir "$testdir"
+
+# Setup for 16000 blocks, but we'll accept stress testing down to
+# 2^10 blocks... that should be plenty for anyone.
+fnr=$((12 + LOAD_FACTOR))
+free_blocks=$(stat -f -c '%a' "$testdir")
+blksz=$(stat -f -c '%S' "$testdir")
+space_avail=$((free_blocks * blksz))
+calc_space() {
+ blocks_needed=$(( 2 ** (fnr + 1) ))
+ space_needed=$((blocks_needed * blksz * 5 / 4))
+}
+calc_space
+while test $space_needed -gt $space_avail; do
+ fnr=$((fnr - 1))
+ calc_space
+done
+test $fnr -lt 10 && _notrun "Insufficient space for stress test; would only create $blocks_needed extents."
+bytes=$((blocks_needed * blksz))
+
+echo "Create a many-block file"
+echo "creating $blocks_needed blocks..." >> "$seqres.full"
+_pwrite_byte 0x62 0 $blksz $testdir/file0 >> $seqres.full
+"$XFS_IO_PROG" -f -c "pwrite -S 0x61 -b 4194304 0 $bytes" "$testdir/file1" >> "$seqres.full"
+echo "punching..." >> "$seqres.full"
+"$here/src/punch-alternating" "$testdir/file1" >> "$seqres.full"
+seq 0 2 $((2 ** (fnr + 1) )) | while read lblk; do
+ _reflink_range $testdir/file0 0 $testdir/file1 $((lblk * blksz)) $blksz >> $seqres.full
+done
+echo "...done" >> "$seqres.full"
+_scratch_cycle_mount
+
+echo "Reflink the big file"
+echo "reflinking $((blocks_needed / 2)) blocks, $((bytes / 2)) bytes" >> "$seqres.full"
+_reflink_range "$testdir/file1" 0 "$testdir/file2" 0 $bytes >> "$seqres.full"
+
+echo "Defrag the big file"
+old_nextents=$(_count_extents $testdir/file1)
+$XFS_FSR_PROG -v -d $testdir/file1 >> $seqres.full
+new_nextents=$(_count_extents $testdir/file1)
+
+echo "Check extent count"
+$XFS_IO_PROG -c 'stat -v' $testdir/file1 >> $seqres.full
+$XFS_IO_PROG -c 'stat -v' $testdir/file2 >> $seqres.full
+echo "extents: $old_nextents -> $new_nextents" >> $seqres.full
+test $old_nextents -gt $new_nextents || echo "FAIL: $old_nextents -> $new_nextents"
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,6 @@
+QA output created by 873
+Format and mount
+Create a many-block file
+Reflink the big file
+Defrag the big file
+Check extent count
new file mode 100755
@@ -0,0 +1,97 @@
+#! /bin/bash
+# FS QA Test No. 874
+#
+# Ensure that xfs_fsr handles errors correctly while defragging files.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+. ./common/inject
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+_require_command "$XFS_FSR_PROG" "xfs_fsr"
+_require_xfs_io_error_injection "bmap_finish_one"
+_require_xfs_scratch_rmapbt
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+testdir="$SCRATCH_MNT/test-$seq"
+blksz=65536
+blks=3
+mkdir "$testdir"
+
+echo "Create a many-block file"
+_pwrite_byte 0x62 0 $((blksz * blks)) $testdir/file1 >> $seqres.full
+_pwrite_byte 0x63 0 $blksz $testdir/file2 >> $seqres.full
+_reflink_range $testdir/file2 0 $testdir/file1 $blksz $blksz >> $seqres.full
+_scratch_cycle_mount
+$XFS_IO_PROG -c 'bmap -v' $testdir/file1 >> $seqres.full
+
+echo "Inject error"
+_scratch_inject_error "bmap_finish_one"
+
+echo "Defrag the file"
+old_nextents=$(_count_extents $testdir/file1)
+$XFS_FSR_PROG -v -d $testdir/file1 >> $seqres.full 2>&1
+
+echo "FS should be shut down, touch will fail"
+touch $SCRATCH_MNT/badfs 2>&1 | _filter_scratch
+
+echo "Remount to replay log" | tee /dev/ttyprintk
+_scratch_inject_logprint >> $seqres.full
+new_nextents=$(_count_extents $testdir/file1)
+
+echo "Check extent count" | tee /dev/ttyprintk
+$XFS_IO_PROG -c 'stat -v' $testdir/file1 >> $seqres.full
+$XFS_IO_PROG -c 'stat -v' $testdir/file2 >> $seqres.full
+echo "extents: $old_nextents -> $new_nextents" >> $seqres.full
+
+echo "FS should be online, touch should succeed"
+touch $SCRATCH_MNT/goodfs
+$XFS_IO_PROG -c 'bmap -v' $testdir/file1 >> $seqres.full
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,10 @@
+QA output created by 874
+Format and mount
+Create a many-block file
+Inject error
+Defrag the file
+FS should be shut down, touch will fail
+touch: cannot touch 'SCRATCH_MNT/badfs': Input/output error
+Remount to replay log
+Check extent count
+FS should be online, touch should succeed
new file mode 100755
@@ -0,0 +1,102 @@
+#! /bin/bash
+# FS QA Test No. 875
+#
+# Ensure that xfs_fsr handles quota correctly while defragging files.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename "$0"`
+seqres="$RESULT_DIR/$seq"
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf "$tmp".*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+. ./common/quota
+
+# real QA test starts here
+_supported_os Linux
+_supported_fs xfs
+_require_scratch_reflink
+_require_cp_reflink
+_require_command "$XFS_FSR_PROG" "xfs_fsr"
+_require_quota
+_require_nobody
+
+do_repquota()
+{
+ repquota $SCRATCH_MNT | egrep '^(fsgqa|root|nobody)'
+}
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+export MOUNT_OPTIONS="-o usrquota,grpquota $MOUNT_OPTIONS"
+_scratch_mount >> "$seqres.full" 2>&1
+quotacheck -u -g $SCRATCH_MNT 2> /dev/null
+quotaon $SCRATCH_MNT 2> /dev/null
+
+testdir="$SCRATCH_MNT/test-$seq"
+blksz=65536
+blks=3
+mkdir "$testdir"
+
+echo "Create a many-block file"
+touch $testdir/file1
+chown nobody $testdir/file1
+touch $testdir/file2
+chown nobody $testdir/file2
+_pwrite_byte 0x62 0 $((blksz * blks)) $testdir/file1 >> $seqres.full
+_pwrite_byte 0x63 0 $blksz $testdir/file2 >> $seqres.full
+_reflink_range $testdir/file2 0 $testdir/file1 $blksz $blksz >> $seqres.full
+do_repquota
+_scratch_cycle_mount
+
+echo "Defrag the file"
+old_nextents=$(_count_extents $testdir/file1)
+$XFS_FSR_PROG -v -d $testdir/file1 >> $seqres.full
+new_nextents=$(_count_extents $testdir/file1)
+do_repquota
+
+echo "Remount the FS to see if accounting changes"
+_scratch_cycle_mount
+do_repquota
+
+echo "Check extent count"
+$XFS_IO_PROG -c 'stat -v' $testdir/file1 >> $seqres.full
+$XFS_IO_PROG -c 'stat -v' $testdir/file2 >> $seqres.full
+echo "extents: $old_nextents -> $new_nextents" >> $seqres.full
+test $old_nextents -gt $new_nextents || echo "FAIL: $old_nextents -> $new_nextents"
+
+# success, all done
+status=0
+exit
new file mode 100644
@@ -0,0 +1,12 @@
+QA output created by 875
+Format and mount
+Create a many-block file
+root -- 0 0 0 4 0 0
+nobody -- 256 0 0 2 0 0
+Defrag the file
+root -- 0 0 0 4 0 0
+nobody -- 256 0 0 2 0 0
+Remount the FS to see if accounting changes
+root -- 0 0 0 4 0 0
+nobody -- 256 0 0 2 0 0
+Check extent count
@@ -308,3 +308,6 @@
325 auto quick clone
326 auto quick clone
327 auto quick clone
+873 auto quick clone fsr
+874 auto quick clone fsr
+875 auto quick clone fsr quota
Add a few tests to stress the new swapext code for reflink and rmap. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- tests/xfs/873 | 108 +++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/873.out | 6 +++ tests/xfs/874 | 97 ++++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/874.out | 10 +++++ tests/xfs/875 | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++ tests/xfs/875.out | 12 ++++++ tests/xfs/group | 3 + 7 files changed, 338 insertions(+) create mode 100755 tests/xfs/873 create mode 100644 tests/xfs/873.out create mode 100755 tests/xfs/874 create mode 100644 tests/xfs/874.out create mode 100755 tests/xfs/875 create mode 100644 tests/xfs/875.out