diff mbox series

[2/9] man: create a separate GEOMETRY ioctl manpage

Message ID 156104946127.1174403.3334245262659435539.stgit@magnolia (mailing list archive)
State Accepted, archived
Headers show
Series xfsprogs: document the ioctls scrub uses | expand

Commit Message

Darrick J. Wong June 20, 2019, 4:51 p.m. UTC 
From: Darrick J. Wong <darrick.wong@oracle.com>

Break out the xfs geometry ioctl into a separate manpage so that we can
document how it works.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 man/man2/ioctl_xfs_fsop_geometry.2 |  221 ++++++++++++++++++++++++++++++++++++
 man/man3/xfsctl.3                  |   11 +-
 2 files changed, 228 insertions(+), 4 deletions(-)
 create mode 100644 man/man2/ioctl_xfs_fsop_geometry.2

Comments

Eric Sandeen July 5, 2019, 3:01 p.m. UTC | #1 
On 6/20/19 11:51 AM, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> Break out the xfs geometry ioctl into a separate manpage so that we can
> document how it works.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> ---
>  man/man2/ioctl_xfs_fsop_geometry.2 |  221 ++++++++++++++++++++++++++++++++++++
>  man/man3/xfsctl.3                  |   11 +-
>  2 files changed, 228 insertions(+), 4 deletions(-)
>  create mode 100644 man/man2/ioctl_xfs_fsop_geometry.2

Same drill, I can change any agreed-to suggestions on the way in,
just a couple things below.

> 
> diff --git a/man/man2/ioctl_xfs_fsop_geometry.2 b/man/man2/ioctl_xfs_fsop_geometry.2
> new file mode 100644
> index 00000000..c6e89efd
> --- /dev/null
> +++ b/man/man2/ioctl_xfs_fsop_geometry.2
> @@ -0,0 +1,221 @@
> +.\" Copyright (c) 2019, Oracle.  All rights reserved.
> +.\"
> +.\" %%%LICENSE_START(GPLv2+_DOC_FULL)
> +.\" SPDX-License-Identifier: GPL-2.0+
> +.\" %%%LICENSE_END
> +.TH IOCTL-XFS-FSOP-GEOMETRY 2 2019-06-17 "XFS"
> +.SH NAME
> +ioctl_xfs_fsop_geometry \- report XFS filesystem shape

can we just say geometry here or maybe "layout?"  "Shape" isn't really used anywhere else.

> +.SH SYNOPSIS
> +.br
> +.B #include <xfs/xfs_fs.h>
> +.PP
> +.BI "int ioctl(int " fd ", XFS_IOC_FSOP_GEOMETRY, struct xfs_fsop_geom*" arg );
> +.br
> +.BI "int ioctl(int " fd ", XFS_IOC_FSOP_GEOMETRY_V1, struct xfs_fsop_geom_v1 *" arg );
> +.SH DESCRIPTION
> +Report the storage space parameters that influence allocation decisions in
> +this XFS filesystem.

This doesn't seem 100% accurate (uuid for example...) but meh.

> +This information is conveyed in a structure of the following form:
> +.PP
> +.in +4n
> +.nf
> +struct xfs_fsop_geom {
> +	__u32         blocksize;
> +	__u32         rtextsize;
> +	__u32         agblocks;
> +	__u32         agcount;
> +	__u32         logblocks;
> +	__u32         sectsize;
> +	__u32         inodesize;
> +	__u32         imaxpct;
> +	__u64         datablocks;
> +	__u64         rtblocks;
> +	__u64         rtextents;
> +	__u64         logstart;
> +	unsigned char uuid[16];
> +	__u32         sunit;
> +	__u32         swidth;
> +	__s32         version;
> +	__u32         flags;
> +	__u32         logsectsize;
> +	__u32         rtsectsize;
> +	__u32         dirblocksize;
> +	/* struct xfs_fsop_geom_v1 stops here. */
> +
> +	__u32         logsunit;
> +};
> +.fi
> +.in
> +.PP
> +.I blocksize
> +is the size of a fundamental filesystem block, in bytes.
> +.PP
> +.I rtextsize
> +is the size of an extent on the realtime volume, in bytes.
> +.PP
> +.I agblocks
> +is the size of an allocation group, in units of filesystem blocks.
> +.PP
> +.I agcount
> +is the number of allocation groups in the filesystem.
> +.PP
> +.I logblocks
> +is the size of the log, in units of filesystem blocks.
> +.PP
> +.I sectsize
> +is the smallest amount of data that can be written to the data device
> +atomically, in bytes.
> +.PP
> +.I inodesize
> +is the size of an inode record, in bytes.
> +.PP
> +.I imaxpct
> +is the maximum percentage of the filesystem that can be allocated to inode
> +record blocks.
> +.PP
> +.I datablocks
> +is the size of the data device, in units of filesystem blocks.
> +.PP
> +.I rtblocks
> +is the size of the realtime device, in units of filesystem blocks.
> +.PP
> +.I rtextents
> +is the number of extents that can be allocated on the realtime device.
> +.PP
> +.I logstart
> +is the start of the log, in units of filesystem blocks.
> +If the filesystem has an external log, this will be zero.
> +.PP
> +.I uuid
> +is the universal unique identifier of the filesystem.
> +.PP
> +.I sunit
> +is what the filesystem has been told is the size of a RAID stripe unit on the
> +underlying data device, in filesystem blocks.
> +.PP
> +.I swidth
> +is what the filesystem has been told is the width of a RAID stripe on the
> +underlying data device, in units of RAID stripe units.
> +.PP
> +.I version
> +is the version of this structure.
> +This value will be XFS_FSOP_GEOM_VERSION.
> +.PP
> +.I flags
> +tell us what features are enabled on the filesystem.
> +Refer to the section
> +.B FILESYSTEM FEATURE FLAGS
> +below for more information about each feature.
> +.PP
> +.I logsectsize
> +is the smallest amount of data that can be written to the log device atomically,
> +in bytes.
> +.PP
> +.I rtsectsize
> +is the smallest amount of data that can be written to the realtime device
> +atomically, in bytes.
> +.PP
> +.I dirblocksize
> +is the size of directory blocks, in bytes.
> +.PP
> +.I logsunit
> +is what the filesystem has been told is the size of a RAID stripe unit on the
> +underlying log device, in filesystem blocks.
> +This field is meaningful only if the flag
> +.B  XFS_FSOP_GEOM_FLAGS_LOGV2
> +is set.
> +.SH FILESYSTEM FEATURE FLAGS
> +Filesystem features are reported to userspace as a combination the following
> +flags:
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_ATTR
> +Extended attributes are present.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_NLINK
> +This filesystem supports up to 2^32 links.
> +If this flag is not set, the filesystem supports only 2^16 links.

Files on this filesystem support up to 2^32 hard links.

> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_QUOTA
> +Quotas are enabled.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_IALIGN
> +Inodes are aligned for better performance.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_DALIGN
> +Filesystem tries to align data block allocations to RAID stripe units for
> +better performance.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_SHARED
> +Unused.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_EXTFLG
> +Filesystem supports unwritten extents.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_DIRV2
> +Directories are in version 2 format and maintain free space data for better
> +performance.
> +Version 1 format directories are no longer supported.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_LOGV2
> +Log uses the V2 format.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_SECTOR
> +The log device has a sector size larger than 512 bytes.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_ATTR2
> +Filesystem contains V2 extended attributes.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_PROJID32
> +Project IDs can be as large as 2^32.
> +If this flag is not set, the filesystem supports only 2^16 project IDs.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_DIRV2CI
> +Case-insensitive lookups are supported on directories.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_LAZYSB
> +On-disk superblock counters are updated only at unmount time.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_V5SB
> +Metadata blocks are self describing and contain checksums.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_FTYPE
> +Directories contain inode types in directory entries.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_FINOBT
> +Filesystem maintains an index of free inodes.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_SPINODES
> +Filesystem may allocate discontiguous inode chunks when free space is
> +fragmented.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_RMAPBT
> +Filesystem stores reverse mappings of blocks to owners.
> +.TP
> +.B XFS_FSOP_GEOM_FLAGS_REFLINK
> +Filesystem supports sharing blocks between files.
> +.RE
> +
> +.SH RETURN VALUE
> +On error, \-1 is returned, and
> +.I errno
> +is set to indicate the error.
> +.PP
> +.SH ERRORS
> +Error codes can be one of, but are not limited to, the following:
> +.TP
> +.B EFAULT
> +The kernel was not able to copy into the userspace buffer.
> +.TP
> +.B EFSBADCRC
> +Metadata checksum validation failed while performing the query.
> +.TP
> +.B EFSCORRUPTED
> +Metadata corruption was encountered while performing the query.
> +.TP
> +.B EIO
> +An I/O error was encountered while performing the query.
> +.SH CONFORMING TO
> +This API is specific to XFS filesystem on the Linux kernel.
> +.SH SEE ALSO
> +.BR ioctl (2)
> diff --git a/man/man3/xfsctl.3 b/man/man3/xfsctl.3
> index 2992b5be..1237eac6 100644
> --- a/man/man3/xfsctl.3
> +++ b/man/man3/xfsctl.3
> @@ -479,6 +479,12 @@ the kernel, except no output count parameter is used (should
>  be initialized to zero).
>  An error is returned if the inode number is invalid.
>  
> +.TP
> +.B XFS_IOC_FSGEOMETRY
> +See
> +.BR ioctl_xfs_fsop_geometry (2)
> +for more information.
> +
>  .PP
>  .nf
>  .B XFS_IOC_THAW
> @@ -494,10 +500,6 @@ An error is returned if the inode number is invalid.
>  These interfaces are used to implement various filesystem internal
>  operations on XFS filesystems.
>  For
> -.B XFS_IOC_FSGEOMETRY
> -(get filesystem mkfs time information), the output structure is of type
> -.BR struct xfs_fsop_geom .
> -For
>  .B XFS_FS_COUNTS
>  (get filesystem dynamic global information), the output structure is of type
>  .BR xfs_fsop_counts_t .
> @@ -506,6 +508,7 @@ as they are not of general use to applications.
>  
>  .SH SEE ALSO
>  .BR ioctl_xfs_fsgetxattr (2),
> +.BR ioctl_xfs_fsop_geometry (2),
>  .BR fstatfs (2),
>  .BR statfs (2),
>  .BR xfs (5),
>
Darrick J. Wong July 5, 2019, 4:25 p.m. UTC | #2 
On Fri, Jul 05, 2019 at 10:01:56AM -0500, Eric Sandeen wrote:
> 
> 
> On 6/20/19 11:51 AM, Darrick J. Wong wrote:
> > From: Darrick J. Wong <darrick.wong@oracle.com>
> > 
> > Break out the xfs geometry ioctl into a separate manpage so that we can
> > document how it works.
> > 
> > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > ---
> >  man/man2/ioctl_xfs_fsop_geometry.2 |  221 ++++++++++++++++++++++++++++++++++++
> >  man/man3/xfsctl.3                  |   11 +-
> >  2 files changed, 228 insertions(+), 4 deletions(-)
> >  create mode 100644 man/man2/ioctl_xfs_fsop_geometry.2
> 
> Same drill, I can change any agreed-to suggestions on the way in,
> just a couple things below.
> 
> > 
> > diff --git a/man/man2/ioctl_xfs_fsop_geometry.2 b/man/man2/ioctl_xfs_fsop_geometry.2
> > new file mode 100644
> > index 00000000..c6e89efd
> > --- /dev/null
> > +++ b/man/man2/ioctl_xfs_fsop_geometry.2
> > @@ -0,0 +1,221 @@
> > +.\" Copyright (c) 2019, Oracle.  All rights reserved.
> > +.\"
> > +.\" %%%LICENSE_START(GPLv2+_DOC_FULL)
> > +.\" SPDX-License-Identifier: GPL-2.0+
> > +.\" %%%LICENSE_END
> > +.TH IOCTL-XFS-FSOP-GEOMETRY 2 2019-06-17 "XFS"
> > +.SH NAME
> > +ioctl_xfs_fsop_geometry \- report XFS filesystem shape
> 
> can we just say geometry here or maybe "layout?"  "Shape" isn't really
> used anywhere else.

Eh, I guess that's fine for the title.  I was trying to avoid using
geometry to define itself, but that can wait.

> > +.SH SYNOPSIS
> > +.br
> > +.B #include <xfs/xfs_fs.h>
> > +.PP
> > +.BI "int ioctl(int " fd ", XFS_IOC_FSOP_GEOMETRY, struct xfs_fsop_geom*" arg );
> > +.br
> > +.BI "int ioctl(int " fd ", XFS_IOC_FSOP_GEOMETRY_V1, struct xfs_fsop_geom_v1 *" arg );
> > +.SH DESCRIPTION
> > +Report the storage space parameters that influence allocation decisions in
> > +this XFS filesystem.
> 
> This doesn't seem 100% accurate (uuid for example...) but meh.

"Report the parameters that control filesystem space configuration
decisions in a particular XFS filesystem."

Any better?

> 
> > +This information is conveyed in a structure of the following form:
> > +.PP
> > +.in +4n
> > +.nf
> > +struct xfs_fsop_geom {
> > +	__u32         blocksize;
> > +	__u32         rtextsize;
> > +	__u32         agblocks;
> > +	__u32         agcount;
> > +	__u32         logblocks;
> > +	__u32         sectsize;
> > +	__u32         inodesize;
> > +	__u32         imaxpct;
> > +	__u64         datablocks;
> > +	__u64         rtblocks;
> > +	__u64         rtextents;
> > +	__u64         logstart;
> > +	unsigned char uuid[16];
> > +	__u32         sunit;
> > +	__u32         swidth;
> > +	__s32         version;
> > +	__u32         flags;
> > +	__u32         logsectsize;
> > +	__u32         rtsectsize;
> > +	__u32         dirblocksize;
> > +	/* struct xfs_fsop_geom_v1 stops here. */
> > +
> > +	__u32         logsunit;
> > +};
> > +.fi
> > +.in
> > +.PP
> > +.I blocksize
> > +is the size of a fundamental filesystem block, in bytes.
> > +.PP
> > +.I rtextsize
> > +is the size of an extent on the realtime volume, in bytes.
> > +.PP
> > +.I agblocks
> > +is the size of an allocation group, in units of filesystem blocks.
> > +.PP
> > +.I agcount
> > +is the number of allocation groups in the filesystem.
> > +.PP
> > +.I logblocks
> > +is the size of the log, in units of filesystem blocks.
> > +.PP
> > +.I sectsize
> > +is the smallest amount of data that can be written to the data device
> > +atomically, in bytes.
> > +.PP
> > +.I inodesize
> > +is the size of an inode record, in bytes.
> > +.PP
> > +.I imaxpct
> > +is the maximum percentage of the filesystem that can be allocated to inode
> > +record blocks.
> > +.PP
> > +.I datablocks
> > +is the size of the data device, in units of filesystem blocks.
> > +.PP
> > +.I rtblocks
> > +is the size of the realtime device, in units of filesystem blocks.
> > +.PP
> > +.I rtextents
> > +is the number of extents that can be allocated on the realtime device.
> > +.PP
> > +.I logstart
> > +is the start of the log, in units of filesystem blocks.
> > +If the filesystem has an external log, this will be zero.
> > +.PP
> > +.I uuid
> > +is the universal unique identifier of the filesystem.
> > +.PP
> > +.I sunit
> > +is what the filesystem has been told is the size of a RAID stripe unit on the
> > +underlying data device, in filesystem blocks.
> > +.PP
> > +.I swidth
> > +is what the filesystem has been told is the width of a RAID stripe on the
> > +underlying data device, in units of RAID stripe units.
> > +.PP
> > +.I version
> > +is the version of this structure.
> > +This value will be XFS_FSOP_GEOM_VERSION.
> > +.PP
> > +.I flags
> > +tell us what features are enabled on the filesystem.
> > +Refer to the section
> > +.B FILESYSTEM FEATURE FLAGS
> > +below for more information about each feature.
> > +.PP
> > +.I logsectsize
> > +is the smallest amount of data that can be written to the log device atomically,
> > +in bytes.
> > +.PP
> > +.I rtsectsize
> > +is the smallest amount of data that can be written to the realtime device
> > +atomically, in bytes.
> > +.PP
> > +.I dirblocksize
> > +is the size of directory blocks, in bytes.
> > +.PP
> > +.I logsunit
> > +is what the filesystem has been told is the size of a RAID stripe unit on the
> > +underlying log device, in filesystem blocks.
> > +This field is meaningful only if the flag
> > +.B  XFS_FSOP_GEOM_FLAGS_LOGV2
> > +is set.
> > +.SH FILESYSTEM FEATURE FLAGS
> > +Filesystem features are reported to userspace as a combination the following
> > +flags:
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_ATTR
> > +Extended attributes are present.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_NLINK
> > +This filesystem supports up to 2^32 links.
> > +If this flag is not set, the filesystem supports only 2^16 links.
> 
> Files on this filesystem support up to 2^32 hard links.

Yes, that's better. :)
--D

> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_QUOTA
> > +Quotas are enabled.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_IALIGN
> > +Inodes are aligned for better performance.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_DALIGN
> > +Filesystem tries to align data block allocations to RAID stripe units for
> > +better performance.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_SHARED
> > +Unused.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_EXTFLG
> > +Filesystem supports unwritten extents.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_DIRV2
> > +Directories are in version 2 format and maintain free space data for better
> > +performance.
> > +Version 1 format directories are no longer supported.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_LOGV2
> > +Log uses the V2 format.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_SECTOR
> > +The log device has a sector size larger than 512 bytes.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_ATTR2
> > +Filesystem contains V2 extended attributes.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_PROJID32
> > +Project IDs can be as large as 2^32.
> > +If this flag is not set, the filesystem supports only 2^16 project IDs.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_DIRV2CI
> > +Case-insensitive lookups are supported on directories.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_LAZYSB
> > +On-disk superblock counters are updated only at unmount time.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_V5SB
> > +Metadata blocks are self describing and contain checksums.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_FTYPE
> > +Directories contain inode types in directory entries.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_FINOBT
> > +Filesystem maintains an index of free inodes.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_SPINODES
> > +Filesystem may allocate discontiguous inode chunks when free space is
> > +fragmented.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_RMAPBT
> > +Filesystem stores reverse mappings of blocks to owners.
> > +.TP
> > +.B XFS_FSOP_GEOM_FLAGS_REFLINK
> > +Filesystem supports sharing blocks between files.
> > +.RE
> > +
> > +.SH RETURN VALUE
> > +On error, \-1 is returned, and
> > +.I errno
> > +is set to indicate the error.
> > +.PP
> > +.SH ERRORS
> > +Error codes can be one of, but are not limited to, the following:
> > +.TP
> > +.B EFAULT
> > +The kernel was not able to copy into the userspace buffer.
> > +.TP
> > +.B EFSBADCRC
> > +Metadata checksum validation failed while performing the query.
> > +.TP
> > +.B EFSCORRUPTED
> > +Metadata corruption was encountered while performing the query.
> > +.TP
> > +.B EIO
> > +An I/O error was encountered while performing the query.
> > +.SH CONFORMING TO
> > +This API is specific to XFS filesystem on the Linux kernel.
> > +.SH SEE ALSO
> > +.BR ioctl (2)
> > diff --git a/man/man3/xfsctl.3 b/man/man3/xfsctl.3
> > index 2992b5be..1237eac6 100644
> > --- a/man/man3/xfsctl.3
> > +++ b/man/man3/xfsctl.3
> > @@ -479,6 +479,12 @@ the kernel, except no output count parameter is used (should
> >  be initialized to zero).
> >  An error is returned if the inode number is invalid.
> >  
> > +.TP
> > +.B XFS_IOC_FSGEOMETRY
> > +See
> > +.BR ioctl_xfs_fsop_geometry (2)
> > +for more information.
> > +
> >  .PP
> >  .nf
> >  .B XFS_IOC_THAW
> > @@ -494,10 +500,6 @@ An error is returned if the inode number is invalid.
> >  These interfaces are used to implement various filesystem internal
> >  operations on XFS filesystems.
> >  For
> > -.B XFS_IOC_FSGEOMETRY
> > -(get filesystem mkfs time information), the output structure is of type
> > -.BR struct xfs_fsop_geom .
> > -For
> >  .B XFS_FS_COUNTS
> >  (get filesystem dynamic global information), the output structure is of type
> >  .BR xfs_fsop_counts_t .
> > @@ -506,6 +508,7 @@ as they are not of general use to applications.
> >  
> >  .SH SEE ALSO
> >  .BR ioctl_xfs_fsgetxattr (2),
> > +.BR ioctl_xfs_fsop_geometry (2),
> >  .BR fstatfs (2),
> >  .BR statfs (2),
> >  .BR xfs (5),
> >
diff mbox series

Patch

diff --git a/man/man2/ioctl_xfs_fsop_geometry.2 b/man/man2/ioctl_xfs_fsop_geometry.2
new file mode 100644
index 00000000..c6e89efd
--- /dev/null
+++ b/man/man2/ioctl_xfs_fsop_geometry.2
@@ -0,0 +1,221 @@ 
+.\" Copyright (c) 2019, Oracle.  All rights reserved.
+.\"
+.\" %%%LICENSE_START(GPLv2+_DOC_FULL)
+.\" SPDX-License-Identifier: GPL-2.0+
+.\" %%%LICENSE_END
+.TH IOCTL-XFS-FSOP-GEOMETRY 2 2019-06-17 "XFS"
+.SH NAME
+ioctl_xfs_fsop_geometry \- report XFS filesystem shape
+.SH SYNOPSIS
+.br
+.B #include <xfs/xfs_fs.h>
+.PP
+.BI "int ioctl(int " fd ", XFS_IOC_FSOP_GEOMETRY, struct xfs_fsop_geom*" arg );
+.br
+.BI "int ioctl(int " fd ", XFS_IOC_FSOP_GEOMETRY_V1, struct xfs_fsop_geom_v1 *" arg );
+.SH DESCRIPTION
+Report the storage space parameters that influence allocation decisions in
+this XFS filesystem.
+This information is conveyed in a structure of the following form:
+.PP
+.in +4n
+.nf
+struct xfs_fsop_geom {
+	__u32         blocksize;
+	__u32         rtextsize;
+	__u32         agblocks;
+	__u32         agcount;
+	__u32         logblocks;
+	__u32         sectsize;
+	__u32         inodesize;
+	__u32         imaxpct;
+	__u64         datablocks;
+	__u64         rtblocks;
+	__u64         rtextents;
+	__u64         logstart;
+	unsigned char uuid[16];
+	__u32         sunit;
+	__u32         swidth;
+	__s32         version;
+	__u32         flags;
+	__u32         logsectsize;
+	__u32         rtsectsize;
+	__u32         dirblocksize;
+	/* struct xfs_fsop_geom_v1 stops here. */
+
+	__u32         logsunit;
+};
+.fi
+.in
+.PP
+.I blocksize
+is the size of a fundamental filesystem block, in bytes.
+.PP
+.I rtextsize
+is the size of an extent on the realtime volume, in bytes.
+.PP
+.I agblocks
+is the size of an allocation group, in units of filesystem blocks.
+.PP
+.I agcount
+is the number of allocation groups in the filesystem.
+.PP
+.I logblocks
+is the size of the log, in units of filesystem blocks.
+.PP
+.I sectsize
+is the smallest amount of data that can be written to the data device
+atomically, in bytes.
+.PP
+.I inodesize
+is the size of an inode record, in bytes.
+.PP
+.I imaxpct
+is the maximum percentage of the filesystem that can be allocated to inode
+record blocks.
+.PP
+.I datablocks
+is the size of the data device, in units of filesystem blocks.
+.PP
+.I rtblocks
+is the size of the realtime device, in units of filesystem blocks.
+.PP
+.I rtextents
+is the number of extents that can be allocated on the realtime device.
+.PP
+.I logstart
+is the start of the log, in units of filesystem blocks.
+If the filesystem has an external log, this will be zero.
+.PP
+.I uuid
+is the universal unique identifier of the filesystem.
+.PP
+.I sunit
+is what the filesystem has been told is the size of a RAID stripe unit on the
+underlying data device, in filesystem blocks.
+.PP
+.I swidth
+is what the filesystem has been told is the width of a RAID stripe on the
+underlying data device, in units of RAID stripe units.
+.PP
+.I version
+is the version of this structure.
+This value will be XFS_FSOP_GEOM_VERSION.
+.PP
+.I flags
+tell us what features are enabled on the filesystem.
+Refer to the section
+.B FILESYSTEM FEATURE FLAGS
+below for more information about each feature.
+.PP
+.I logsectsize
+is the smallest amount of data that can be written to the log device atomically,
+in bytes.
+.PP
+.I rtsectsize
+is the smallest amount of data that can be written to the realtime device
+atomically, in bytes.
+.PP
+.I dirblocksize
+is the size of directory blocks, in bytes.
+.PP
+.I logsunit
+is what the filesystem has been told is the size of a RAID stripe unit on the
+underlying log device, in filesystem blocks.
+This field is meaningful only if the flag
+.B  XFS_FSOP_GEOM_FLAGS_LOGV2
+is set.
+.SH FILESYSTEM FEATURE FLAGS
+Filesystem features are reported to userspace as a combination the following
+flags:
+.TP
+.B XFS_FSOP_GEOM_FLAGS_ATTR
+Extended attributes are present.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_NLINK
+This filesystem supports up to 2^32 links.
+If this flag is not set, the filesystem supports only 2^16 links.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_QUOTA
+Quotas are enabled.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_IALIGN
+Inodes are aligned for better performance.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_DALIGN
+Filesystem tries to align data block allocations to RAID stripe units for
+better performance.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_SHARED
+Unused.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_EXTFLG
+Filesystem supports unwritten extents.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_DIRV2
+Directories are in version 2 format and maintain free space data for better
+performance.
+Version 1 format directories are no longer supported.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_LOGV2
+Log uses the V2 format.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_SECTOR
+The log device has a sector size larger than 512 bytes.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_ATTR2
+Filesystem contains V2 extended attributes.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_PROJID32
+Project IDs can be as large as 2^32.
+If this flag is not set, the filesystem supports only 2^16 project IDs.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_DIRV2CI
+Case-insensitive lookups are supported on directories.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_LAZYSB
+On-disk superblock counters are updated only at unmount time.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_V5SB
+Metadata blocks are self describing and contain checksums.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_FTYPE
+Directories contain inode types in directory entries.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_FINOBT
+Filesystem maintains an index of free inodes.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_SPINODES
+Filesystem may allocate discontiguous inode chunks when free space is
+fragmented.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_RMAPBT
+Filesystem stores reverse mappings of blocks to owners.
+.TP
+.B XFS_FSOP_GEOM_FLAGS_REFLINK
+Filesystem supports sharing blocks between files.
+.RE
+
+.SH RETURN VALUE
+On error, \-1 is returned, and
+.I errno
+is set to indicate the error.
+.PP
+.SH ERRORS
+Error codes can be one of, but are not limited to, the following:
+.TP
+.B EFAULT
+The kernel was not able to copy into the userspace buffer.
+.TP
+.B EFSBADCRC
+Metadata checksum validation failed while performing the query.
+.TP
+.B EFSCORRUPTED
+Metadata corruption was encountered while performing the query.
+.TP
+.B EIO
+An I/O error was encountered while performing the query.
+.SH CONFORMING TO
+This API is specific to XFS filesystem on the Linux kernel.
+.SH SEE ALSO
+.BR ioctl (2)
diff --git a/man/man3/xfsctl.3 b/man/man3/xfsctl.3
index 2992b5be..1237eac6 100644
--- a/man/man3/xfsctl.3
+++ b/man/man3/xfsctl.3
@@ -479,6 +479,12 @@  the kernel, except no output count parameter is used (should
 be initialized to zero).
 An error is returned if the inode number is invalid.
 
+.TP
+.B XFS_IOC_FSGEOMETRY
+See
+.BR ioctl_xfs_fsop_geometry (2)
+for more information.
+
 .PP
 .nf
 .B XFS_IOC_THAW
@@ -494,10 +500,6 @@  An error is returned if the inode number is invalid.
 These interfaces are used to implement various filesystem internal
 operations on XFS filesystems.
 For
-.B XFS_IOC_FSGEOMETRY
-(get filesystem mkfs time information), the output structure is of type
-.BR struct xfs_fsop_geom .
-For
 .B XFS_FS_COUNTS
 (get filesystem dynamic global information), the output structure is of type
 .BR xfs_fsop_counts_t .
@@ -506,6 +508,7 @@  as they are not of general use to applications.
 
 .SH SEE ALSO
 .BR ioctl_xfs_fsgetxattr (2),
+.BR ioctl_xfs_fsop_geometry (2),
 .BR fstatfs (2),
 .BR statfs (2),
 .BR xfs (5),