| Message ID | 161836233652.2755262.563331015931843615.stgit@magnolia (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | fstests: make sure NEEDSREPAIR feature stops mounts | expand |
On Tue, Apr 13, 2021 at 06:05:36PM -0700, Darrick J. Wong wrote: > From: Darrick J. Wong <djwong@kernel.org> > > Make sure that the needsrepair feature flag can be cleared only by > repair and that mounts are prohibited when the feature is set. > > Signed-off-by: Darrick J. Wong <djwong@kernel.org> > --- > common/xfs | 21 ++++++++++++++ > tests/xfs/768 | 80 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/768.out | 4 +++ > tests/xfs/770 | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/770.out | 2 + > tests/xfs/group | 2 + > 6 files changed, 191 insertions(+) > create mode 100755 tests/xfs/768 > create mode 100644 tests/xfs/768.out > create mode 100755 tests/xfs/770 > create mode 100644 tests/xfs/770.out > > > diff --git a/common/xfs b/common/xfs > index 887bd001..fa204663 100644 > --- a/common/xfs > +++ b/common/xfs > @@ -1114,3 +1114,24 @@ _xfs_get_cowgc_interval() { > _fail "Can't find cowgc interval procfs knob?" > fi > } > + > +# Print the status of the given features on the scratch filesystem. > +# Returns 0 if all features are found, 1 otherwise. > +_check_scratch_xfs_features() > +{ > + local features="$(_scratch_xfs_db -c 'version')" > + local output=("FEATURES:") > + local found=0 > + > + for feature in "$@"; do > + local status="NO" > + if echo "${features}" | grep -q -w "${feature}"; then > + status="YES" > + found=$((found + 1)) > + fi > + output+=("${feature}:${status}") > + done > + > + echo "${output[@]}" > + test "${found}" -eq "$#" > +} > diff --git a/tests/xfs/768 b/tests/xfs/768 > new file mode 100755 > index 00000000..dd9c53be > --- /dev/null > +++ b/tests/xfs/768 > @@ -0,0 +1,80 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0-or-later > +# Copyright (c) 2021 Oracle. All Rights Reserved. > +# > +# FS QA Test No. 768 > +# > +# Make sure that the kernel won't mount a filesystem if repair forcibly sets > +# NEEDSREPAIR while fixing metadata. Corrupt a directory in such a way as > +# to force repair to write an invalid dirent value as a sentinel to trigger a > +# repair activity in a later phase. Use a debug knob in xfs_repair to abort > +# the repair immediately after forcing the flag on. > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > + > +# real QA test starts here > +_supported_fs xfs > +_require_scratch > +grep -q LIBXFS_DEBUG_WRITE_CRASH $XFS_REPAIR_PROG || \ > + _notrun "libxfs write failure injection hook not detected?" Sorry that I didn't notice it earlier, but this pattern repeats in both tests, might be possible to turn it into a common helper? And $XFS_REPAIR_PROG may contain some pre-defined options along with xfs_repair in the future, like $DF_PROG is actually defined as "df -T -P". Perhaps $(type -P xfs_repair) is better here. > + > +rm -f $seqres.full > + > +# Set up a real filesystem for our actual test > +_scratch_mkfs -m crc=1 >> $seqres.full Test relies on -m crc=1, so probably we need _require_xfs_crc as well to make sure userspace and kernel supports crc. Or just like xfs/770, use _require_scratch_xfs_crc instead of _require_scratch? > + > +# Create a directory large enough to have a dir data block. 2k worth of > +# dirent names ought to do it. > +_scratch_mount > +mkdir -p $SCRATCH_MNT/fubar > +for i in $(seq 0 256 2048); do > + fname=$(printf "%0255d" $i) > + ln -s -f urk $SCRATCH_MNT/fubar/$fname > +done > +inum=$(stat -c '%i' $SCRATCH_MNT/fubar) > +_scratch_unmount > + > +# Fuzz the directory > +_scratch_xfs_db -x -c "inode $inum" -c "dblock 0" \ > + -c "fuzz -d bu[2].inumber add" >> $seqres.full > + > +# Try to repair the directory, force it to crash after setting needsrepair > +LIBXFS_DEBUG_WRITE_CRASH=ddev=2 _scratch_xfs_repair 2>> $seqres.full > +test $? -eq 137 || echo "repair should have been killed??" > + > +# We can't mount, right? > +_check_scratch_xfs_features NEEDSREPAIR > +_try_scratch_mount &> $tmp.mount > +res=$? > +_filter_scratch < $tmp.mount > +if [ $res -eq 0 ]; then > + echo "Should not be able to mount after needsrepair crash" > + _scratch_unmount > +fi > + > +# Repair properly this time and retry the mount > +_scratch_xfs_repair 2>> $seqres.full > +_check_scratch_xfs_features NEEDSREPAIR > + > +_scratch_mount > + > +# success, all done > +status=0 > +exit > diff --git a/tests/xfs/768.out b/tests/xfs/768.out > new file mode 100644 > index 00000000..1168ba25 > --- /dev/null > +++ b/tests/xfs/768.out > @@ -0,0 +1,4 @@ > +QA output created by 768 > +FEATURES: NEEDSREPAIR:YES > +mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning. > +FEATURES: NEEDSREPAIR:NO > diff --git a/tests/xfs/770 b/tests/xfs/770 > new file mode 100755 > index 00000000..574047d5 > --- /dev/null > +++ b/tests/xfs/770 > @@ -0,0 +1,82 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0-or-later > +# Copyright (c) 2021 Oracle. All Rights Reserved. > +# > +# FS QA Test No. 770 > +# > +# Populate a filesystem with all types of metadata, then run repair with the > +# libxfs write failure trigger set to go after a single write. Check that the > +# injected error trips, causing repair to abort, that needsrepair is set on the > +# fs, the kernel won't mount; and that a non-injecting repair run clears > +# needsrepair and makes the filesystem mountable again. > +# > +# Repeat with the trip point set to successively higher numbers of writes until > +# we hit ~200 writes or repair manages to run to completion without tripping. > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.* > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/populate > +. ./common/filter > + > +# real QA test starts here > +_supported_fs xfs > + > +_require_scratch_xfs_crc # needsrepair only exists for v5 > +_require_populate_commands > + > +rm -f ${RESULT_DIR}/require_scratch # we take care of checking the fs Use _require_scratch_nocheck instead? Thanks, Eryu > +rm -f $seqres.full > + > +# Populate the filesystem > +_scratch_populate_cached nofill >> $seqres.full 2>&1 > + > +max_writes=200 # 200 loops should be enough for anyone > +nr_incr=$((13 / TIME_FACTOR)) > +test $nr_incr -lt 1 && nr_incr=1 > +for ((nr_writes = 1; nr_writes < max_writes; nr_writes += nr_incr)); do > + # Start a repair and force it to abort after some number of writes > + LIBXFS_DEBUG_WRITE_CRASH=ddev=$nr_writes _scratch_xfs_repair 2>> $seqres.full > + res=$? > + if [ $res -ne 0 ] && [ $res -ne 137 ]; then > + echo "repair failed with $res??" > + break > + elif [ $res -eq 0 ]; then > + [ $nr_writes -eq 1 ] && \ > + echo "ran to completion on the first try?" > + break > + fi > + > + # Check the state of NEEDSREPAIR after repair fails. If it isn't set > + # but if repair -n says the fs is clean, then it's possible that the > + # injected error caused it to abort immediately after the write that > + # cleared NEEDSREPAIR. > + if ! _check_scratch_xfs_features NEEDSREPAIR > /dev/null && > + ! _scratch_xfs_repair -n &>> $seqres.full; then > + echo "NEEDSREPAIR should be set on corrupt fs" > + fi > + > + # Repair properly this time and retry the mount > + _scratch_xfs_repair 2>> $seqres.full > + _check_scratch_xfs_features NEEDSREPAIR > /dev/null && \ > + echo "Repair failed to clear NEEDSREPAIR on the $nr_writes writes test" > +done > + > +# success, all done > +echo Silence is golden. > +status=0 > +exit > diff --git a/tests/xfs/770.out b/tests/xfs/770.out > new file mode 100644 > index 00000000..725d740b > --- /dev/null > +++ b/tests/xfs/770.out > @@ -0,0 +1,2 @@ > +QA output created by 770 > +Silence is golden. > diff --git a/tests/xfs/group b/tests/xfs/group > index fe83f82d..09fddb5a 100644 > --- a/tests/xfs/group > +++ b/tests/xfs/group > @@ -520,3 +520,5 @@ > 537 auto quick > 538 auto stress > 539 auto quick mount > +768 auto quick repair > +770 auto repair
On Sun, Apr 18, 2021 at 08:14:58PM +0800, Eryu Guan wrote: > On Tue, Apr 13, 2021 at 06:05:36PM -0700, Darrick J. Wong wrote: > > From: Darrick J. Wong <djwong@kernel.org> > > > > Make sure that the needsrepair feature flag can be cleared only by > > repair and that mounts are prohibited when the feature is set. > > > > Signed-off-by: Darrick J. Wong <djwong@kernel.org> > > --- > > common/xfs | 21 ++++++++++++++ > > tests/xfs/768 | 80 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > > tests/xfs/768.out | 4 +++ > > tests/xfs/770 | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++ > > tests/xfs/770.out | 2 + > > tests/xfs/group | 2 + > > 6 files changed, 191 insertions(+) > > create mode 100755 tests/xfs/768 > > create mode 100644 tests/xfs/768.out > > create mode 100755 tests/xfs/770 > > create mode 100644 tests/xfs/770.out > > > > > > diff --git a/common/xfs b/common/xfs > > index 887bd001..fa204663 100644 > > --- a/common/xfs > > +++ b/common/xfs > > @@ -1114,3 +1114,24 @@ _xfs_get_cowgc_interval() { > > _fail "Can't find cowgc interval procfs knob?" > > fi > > } > > + > > +# Print the status of the given features on the scratch filesystem. > > +# Returns 0 if all features are found, 1 otherwise. > > +_check_scratch_xfs_features() > > +{ > > + local features="$(_scratch_xfs_db -c 'version')" > > + local output=("FEATURES:") > > + local found=0 > > + > > + for feature in "$@"; do > > + local status="NO" > > + if echo "${features}" | grep -q -w "${feature}"; then > > + status="YES" > > + found=$((found + 1)) > > + fi > > + output+=("${feature}:${status}") > > + done > > + > > + echo "${output[@]}" > > + test "${found}" -eq "$#" > > +} > > diff --git a/tests/xfs/768 b/tests/xfs/768 > > new file mode 100755 > > index 00000000..dd9c53be > > --- /dev/null > > +++ b/tests/xfs/768 > > @@ -0,0 +1,80 @@ > > +#! /bin/bash > > +# SPDX-License-Identifier: GPL-2.0-or-later > > +# Copyright (c) 2021 Oracle. All Rights Reserved. > > +# > > +# FS QA Test No. 768 > > +# > > +# Make sure that the kernel won't mount a filesystem if repair forcibly sets > > +# NEEDSREPAIR while fixing metadata. Corrupt a directory in such a way as > > +# to force repair to write an invalid dirent value as a sentinel to trigger a > > +# repair activity in a later phase. Use a debug knob in xfs_repair to abort > > +# the repair immediately after forcing the flag on. > > + > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -f $tmp.* > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/filter > > + > > +# real QA test starts here > > +_supported_fs xfs > > +_require_scratch > > +grep -q LIBXFS_DEBUG_WRITE_CRASH $XFS_REPAIR_PROG || \ > > + _notrun "libxfs write failure injection hook not detected?" > > Sorry that I didn't notice it earlier, but this pattern repeats in both > tests, might be possible to turn it into a common helper? > > And $XFS_REPAIR_PROG may contain some pre-defined options along with > xfs_repair in the future, like $DF_PROG is actually defined as > "df -T -P". Perhaps $(type -P xfs_repair) is better here. <shrug> So far nobody's tried that and there are other tests that assume that things like $XFS_SCRUB_PROG are strict file paths, but I don't mind changing this to use `type`. I'll refactor this into a helper function while I'm at it. > > + > > +rm -f $seqres.full > > + > > +# Set up a real filesystem for our actual test > > +_scratch_mkfs -m crc=1 >> $seqres.full > > Test relies on -m crc=1, so probably we need _require_xfs_crc as well to > make sure userspace and kernel supports crc. > > Or just like xfs/770, use _require_scratch_xfs_crc instead of > _require_scratch? Ok, done. > > + > > +# Create a directory large enough to have a dir data block. 2k worth of > > +# dirent names ought to do it. > > +_scratch_mount > > +mkdir -p $SCRATCH_MNT/fubar > > +for i in $(seq 0 256 2048); do > > + fname=$(printf "%0255d" $i) > > + ln -s -f urk $SCRATCH_MNT/fubar/$fname > > +done > > +inum=$(stat -c '%i' $SCRATCH_MNT/fubar) > > +_scratch_unmount > > + > > +# Fuzz the directory > > +_scratch_xfs_db -x -c "inode $inum" -c "dblock 0" \ > > + -c "fuzz -d bu[2].inumber add" >> $seqres.full > > + > > +# Try to repair the directory, force it to crash after setting needsrepair > > +LIBXFS_DEBUG_WRITE_CRASH=ddev=2 _scratch_xfs_repair 2>> $seqres.full > > +test $? -eq 137 || echo "repair should have been killed??" > > + > > +# We can't mount, right? > > +_check_scratch_xfs_features NEEDSREPAIR > > +_try_scratch_mount &> $tmp.mount > > +res=$? > > +_filter_scratch < $tmp.mount > > +if [ $res -eq 0 ]; then > > + echo "Should not be able to mount after needsrepair crash" > > + _scratch_unmount > > +fi > > + > > +# Repair properly this time and retry the mount > > +_scratch_xfs_repair 2>> $seqres.full > > +_check_scratch_xfs_features NEEDSREPAIR > > + > > +_scratch_mount > > + > > +# success, all done > > +status=0 > > +exit > > diff --git a/tests/xfs/768.out b/tests/xfs/768.out > > new file mode 100644 > > index 00000000..1168ba25 > > --- /dev/null > > +++ b/tests/xfs/768.out > > @@ -0,0 +1,4 @@ > > +QA output created by 768 > > +FEATURES: NEEDSREPAIR:YES > > +mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning. > > +FEATURES: NEEDSREPAIR:NO > > diff --git a/tests/xfs/770 b/tests/xfs/770 > > new file mode 100755 > > index 00000000..574047d5 > > --- /dev/null > > +++ b/tests/xfs/770 > > @@ -0,0 +1,82 @@ > > +#! /bin/bash > > +# SPDX-License-Identifier: GPL-2.0-or-later > > +# Copyright (c) 2021 Oracle. All Rights Reserved. > > +# > > +# FS QA Test No. 770 > > +# > > +# Populate a filesystem with all types of metadata, then run repair with the > > +# libxfs write failure trigger set to go after a single write. Check that the > > +# injected error trips, causing repair to abort, that needsrepair is set on the > > +# fs, the kernel won't mount; and that a non-injecting repair run clears > > +# needsrepair and makes the filesystem mountable again. > > +# > > +# Repeat with the trip point set to successively higher numbers of writes until > > +# we hit ~200 writes or repair manages to run to completion without tripping. > > + > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -f $tmp.* > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/populate > > +. ./common/filter > > + > > +# real QA test starts here > > +_supported_fs xfs > > + > > +_require_scratch_xfs_crc # needsrepair only exists for v5 > > +_require_populate_commands > > + > > +rm -f ${RESULT_DIR}/require_scratch # we take care of checking the fs > > Use _require_scratch_nocheck instead? Fixed, thanks. --D > > Thanks, > Eryu > > > +rm -f $seqres.full > > + > > +# Populate the filesystem > > +_scratch_populate_cached nofill >> $seqres.full 2>&1 > > + > > +max_writes=200 # 200 loops should be enough for anyone > > +nr_incr=$((13 / TIME_FACTOR)) > > +test $nr_incr -lt 1 && nr_incr=1 > > +for ((nr_writes = 1; nr_writes < max_writes; nr_writes += nr_incr)); do > > + # Start a repair and force it to abort after some number of writes > > + LIBXFS_DEBUG_WRITE_CRASH=ddev=$nr_writes _scratch_xfs_repair 2>> $seqres.full > > + res=$? > > + if [ $res -ne 0 ] && [ $res -ne 137 ]; then > > + echo "repair failed with $res??" > > + break > > + elif [ $res -eq 0 ]; then > > + [ $nr_writes -eq 1 ] && \ > > + echo "ran to completion on the first try?" > > + break > > + fi > > + > > + # Check the state of NEEDSREPAIR after repair fails. If it isn't set > > + # but if repair -n says the fs is clean, then it's possible that the > > + # injected error caused it to abort immediately after the write that > > + # cleared NEEDSREPAIR. > > + if ! _check_scratch_xfs_features NEEDSREPAIR > /dev/null && > > + ! _scratch_xfs_repair -n &>> $seqres.full; then > > + echo "NEEDSREPAIR should be set on corrupt fs" > > + fi > > + > > + # Repair properly this time and retry the mount > > + _scratch_xfs_repair 2>> $seqres.full > > + _check_scratch_xfs_features NEEDSREPAIR > /dev/null && \ > > + echo "Repair failed to clear NEEDSREPAIR on the $nr_writes writes test" > > +done > > + > > +# success, all done > > +echo Silence is golden. > > +status=0 > > +exit > > diff --git a/tests/xfs/770.out b/tests/xfs/770.out > > new file mode 100644 > > index 00000000..725d740b > > --- /dev/null > > +++ b/tests/xfs/770.out > > @@ -0,0 +1,2 @@ > > +QA output created by 770 > > +Silence is golden. > > diff --git a/tests/xfs/group b/tests/xfs/group > > index fe83f82d..09fddb5a 100644 > > --- a/tests/xfs/group > > +++ b/tests/xfs/group > > @@ -520,3 +520,5 @@ > > 537 auto quick > > 538 auto stress > > 539 auto quick mount > > +768 auto quick repair > > +770 auto repair
diff --git a/common/xfs b/common/xfs index 887bd001..fa204663 100644 --- a/common/xfs +++ b/common/xfs @@ -1114,3 +1114,24 @@ _xfs_get_cowgc_interval() { _fail "Can't find cowgc interval procfs knob?" fi } + +# Print the status of the given features on the scratch filesystem. +# Returns 0 if all features are found, 1 otherwise. +_check_scratch_xfs_features() +{ + local features="$(_scratch_xfs_db -c 'version')" + local output=("FEATURES:") + local found=0 + + for feature in "$@"; do + local status="NO" + if echo "${features}" | grep -q -w "${feature}"; then + status="YES" + found=$((found + 1)) + fi + output+=("${feature}:${status}") + done + + echo "${output[@]}" + test "${found}" -eq "$#" +} diff --git a/tests/xfs/768 b/tests/xfs/768 new file mode 100755 index 00000000..dd9c53be --- /dev/null +++ b/tests/xfs/768 @@ -0,0 +1,80 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (c) 2021 Oracle. All Rights Reserved. +# +# FS QA Test No. 768 +# +# Make sure that the kernel won't mount a filesystem if repair forcibly sets +# NEEDSREPAIR while fixing metadata. Corrupt a directory in such a way as +# to force repair to write an invalid dirent value as a sentinel to trigger a +# repair activity in a later phase. Use a debug knob in xfs_repair to abort +# the repair immediately after forcing the flag on. + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_supported_fs xfs +_require_scratch +grep -q LIBXFS_DEBUG_WRITE_CRASH $XFS_REPAIR_PROG || \ + _notrun "libxfs write failure injection hook not detected?" + +rm -f $seqres.full + +# Set up a real filesystem for our actual test +_scratch_mkfs -m crc=1 >> $seqres.full + +# Create a directory large enough to have a dir data block. 2k worth of +# dirent names ought to do it. +_scratch_mount +mkdir -p $SCRATCH_MNT/fubar +for i in $(seq 0 256 2048); do + fname=$(printf "%0255d" $i) + ln -s -f urk $SCRATCH_MNT/fubar/$fname +done +inum=$(stat -c '%i' $SCRATCH_MNT/fubar) +_scratch_unmount + +# Fuzz the directory +_scratch_xfs_db -x -c "inode $inum" -c "dblock 0" \ + -c "fuzz -d bu[2].inumber add" >> $seqres.full + +# Try to repair the directory, force it to crash after setting needsrepair +LIBXFS_DEBUG_WRITE_CRASH=ddev=2 _scratch_xfs_repair 2>> $seqres.full +test $? -eq 137 || echo "repair should have been killed??" + +# We can't mount, right? +_check_scratch_xfs_features NEEDSREPAIR +_try_scratch_mount &> $tmp.mount +res=$? +_filter_scratch < $tmp.mount +if [ $res -eq 0 ]; then + echo "Should not be able to mount after needsrepair crash" + _scratch_unmount +fi + +# Repair properly this time and retry the mount +_scratch_xfs_repair 2>> $seqres.full +_check_scratch_xfs_features NEEDSREPAIR + +_scratch_mount + +# success, all done +status=0 +exit diff --git a/tests/xfs/768.out b/tests/xfs/768.out new file mode 100644 index 00000000..1168ba25 --- /dev/null +++ b/tests/xfs/768.out @@ -0,0 +1,4 @@ +QA output created by 768 +FEATURES: NEEDSREPAIR:YES +mount: SCRATCH_MNT: mount(2) system call failed: Structure needs cleaning. +FEATURES: NEEDSREPAIR:NO diff --git a/tests/xfs/770 b/tests/xfs/770 new file mode 100755 index 00000000..574047d5 --- /dev/null +++ b/tests/xfs/770 @@ -0,0 +1,82 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (c) 2021 Oracle. All Rights Reserved. +# +# FS QA Test No. 770 +# +# Populate a filesystem with all types of metadata, then run repair with the +# libxfs write failure trigger set to go after a single write. Check that the +# injected error trips, causing repair to abort, that needsrepair is set on the +# fs, the kernel won't mount; and that a non-injecting repair run clears +# needsrepair and makes the filesystem mountable again. +# +# Repeat with the trip point set to successively higher numbers of writes until +# we hit ~200 writes or repair manages to run to completion without tripping. + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/populate +. ./common/filter + +# real QA test starts here +_supported_fs xfs + +_require_scratch_xfs_crc # needsrepair only exists for v5 +_require_populate_commands + +rm -f ${RESULT_DIR}/require_scratch # we take care of checking the fs +rm -f $seqres.full + +# Populate the filesystem +_scratch_populate_cached nofill >> $seqres.full 2>&1 + +max_writes=200 # 200 loops should be enough for anyone +nr_incr=$((13 / TIME_FACTOR)) +test $nr_incr -lt 1 && nr_incr=1 +for ((nr_writes = 1; nr_writes < max_writes; nr_writes += nr_incr)); do + # Start a repair and force it to abort after some number of writes + LIBXFS_DEBUG_WRITE_CRASH=ddev=$nr_writes _scratch_xfs_repair 2>> $seqres.full + res=$? + if [ $res -ne 0 ] && [ $res -ne 137 ]; then + echo "repair failed with $res??" + break + elif [ $res -eq 0 ]; then + [ $nr_writes -eq 1 ] && \ + echo "ran to completion on the first try?" + break + fi + + # Check the state of NEEDSREPAIR after repair fails. If it isn't set + # but if repair -n says the fs is clean, then it's possible that the + # injected error caused it to abort immediately after the write that + # cleared NEEDSREPAIR. + if ! _check_scratch_xfs_features NEEDSREPAIR > /dev/null && + ! _scratch_xfs_repair -n &>> $seqres.full; then + echo "NEEDSREPAIR should be set on corrupt fs" + fi + + # Repair properly this time and retry the mount + _scratch_xfs_repair 2>> $seqres.full + _check_scratch_xfs_features NEEDSREPAIR > /dev/null && \ + echo "Repair failed to clear NEEDSREPAIR on the $nr_writes writes test" +done + +# success, all done +echo Silence is golden. +status=0 +exit diff --git a/tests/xfs/770.out b/tests/xfs/770.out new file mode 100644 index 00000000..725d740b --- /dev/null +++ b/tests/xfs/770.out @@ -0,0 +1,2 @@ +QA output created by 770 +Silence is golden. diff --git a/tests/xfs/group b/tests/xfs/group index fe83f82d..09fddb5a 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -520,3 +520,5 @@ 537 auto quick 538 auto stress 539 auto quick mount +768 auto quick repair +770 auto repair