diff mbox series

[1/1] generic: test reads racing with slow reflink operations

Message ID 169947896885.203781.13438458222742566484.stgit@frogsfrogsfrogs (mailing list archive)
State Superseded
Headers show
Series fstests: updates for Linux 6.7 | expand

Commit Message

Darrick J. Wong Nov. 8, 2023, 9:29 p.m. UTC 
From: Darrick J. Wong <djwong@kernel.org>

XFS has a rather slow reflink operation.  While a reflink operation is
running, other programs cannot read the contents of the source file,
which is causing latency spikes.  Catherine Hoang wrote a patch to
permit reads, since the source file contents do not change.  This is a
functionality test for that patch.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
---
 configure.ac              |    1 
 include/builddefs.in      |    1 
 m4/package_libcdev.m4     |   12 ++
 src/Makefile              |    4 +
 src/t_reflink_read_race.c |  339 +++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/1953        |   74 ++++++++++
 tests/generic/1953.out    |    6 +
 7 files changed, 437 insertions(+)
 create mode 100644 src/t_reflink_read_race.c
 create mode 100755 tests/generic/1953
 create mode 100644 tests/generic/1953.out

Comments

Zorro Lang Nov. 10, 2023, 2:40 p.m. UTC | #1 
On Wed, Nov 08, 2023 at 01:29:28PM -0800, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@kernel.org>
> 
> XFS has a rather slow reflink operation.  While a reflink operation is
> running, other programs cannot read the contents of the source file,
> which is causing latency spikes.  Catherine Hoang wrote a patch to
> permit reads, since the source file contents do not change.  This is a
> functionality test for that patch.
> 
> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
> ---
>  configure.ac              |    1 
>  include/builddefs.in      |    1 
>  m4/package_libcdev.m4     |   12 ++
>  src/Makefile              |    4 +
>  src/t_reflink_read_race.c |  339 +++++++++++++++++++++++++++++++++++++++++++++
>  tests/generic/1953        |   74 ++++++++++
>  tests/generic/1953.out    |    6 +
>  7 files changed, 437 insertions(+)
>  create mode 100644 src/t_reflink_read_race.c
>  create mode 100755 tests/generic/1953
>  create mode 100644 tests/generic/1953.out
> 
> 
> diff --git a/configure.ac b/configure.ac
> index 4687d8a3c0..7333045330 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -71,6 +71,7 @@ AC_HAVE_BMV_OF_SHARED
>  AC_HAVE_NFTW
>  AC_HAVE_RLIMIT_NOFILE
>  AC_HAVE_FIEXCHANGE
> +AC_HAVE_FICLONE
>  
>  AC_CHECK_FUNCS([renameat2])
>  AC_CHECK_FUNCS([reallocarray])
> diff --git a/include/builddefs.in b/include/builddefs.in
> index 969acf0da2..446350d5fc 100644
> --- a/include/builddefs.in
> +++ b/include/builddefs.in
> @@ -73,6 +73,7 @@ HAVE_NFTW = @have_nftw@
>  HAVE_BMV_OF_SHARED = @have_bmv_of_shared@
>  HAVE_RLIMIT_NOFILE = @have_rlimit_nofile@
>  HAVE_FIEXCHANGE = @have_fiexchange@
> +HAVE_FICLONE = @have_ficlone@
>  
>  GCCFLAGS = -funsigned-char -fno-strict-aliasing -Wall
>  
> diff --git a/m4/package_libcdev.m4 b/m4/package_libcdev.m4
> index 7f73104405..91eb64db21 100644
> --- a/m4/package_libcdev.m4
> +++ b/m4/package_libcdev.m4
> @@ -173,4 +173,16 @@ AC_DEFUN([AC_HAVE_FIEXCHANGE],
>      ]])],[have_fiexchange=yes
>         AC_MSG_RESULT(yes)],[AC_MSG_RESULT(no)])
>      AC_SUBST(have_fiexchange)
> +
> +# Check if we have FICLONE
> +AC_DEFUN([AC_HAVE_FICLONE],
> +  [ AC_MSG_CHECKING([for FICLONE])
> +    AC_LINK_IFELSE([AC_LANG_PROGRAM([[
> +#include <sys/ioctl.h>
> +#include <linux/fs.h>
> +    ]], [[
> +	 ioctl(-1, FICLONE, -1);
> +    ]])],[have_ficlone=yes
> +       AC_MSG_RESULT(yes)],[AC_MSG_RESULT(no)])
> +    AC_SUBST(have_ficlone)

I got below build error:
  libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
  cp include/install-sh .
  aclocal -I m4
  /usr/bin/m4:m4/package_libcdev.m4:162: ERROR: end of file in string
  autom4te: error: /usr/bin/m4 failed with exit status: 1
  aclocal: error: autom4te failed with exit status: 1
  make: *** [Makefile:66: configure] Error 1

I think you missed a "])" at here, below "])" belong to last AC_DEFUN.

>    ])
> diff --git a/src/Makefile b/src/Makefile
> index 2815f919b2..49dd2f6c1e 100644
> --- a/src/Makefile
> +++ b/src/Makefile
> @@ -94,6 +94,10 @@ ifeq ($(HAVE_SEEK_DATA), yes)
>   endif
>  endif
>  
> +ifeq ($(HAVE_FICLONE),yes)
> +     TARGETS += t_reflink_read_race
> +endif
> +
>  CFILES = $(TARGETS:=.c)
>  LDIRT = $(TARGETS) fssum
>  

[snip]

> diff --git a/tests/generic/1953 b/tests/generic/1953
> new file mode 100755
> index 0000000000..058538e6fe
> --- /dev/null
> +++ b/tests/generic/1953
> @@ -0,0 +1,74 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2023, Oracle and/or its affiliates.  All Rights Reserved.
> +#
> +# FS QA Test No. 1953
> +#
> +# Race file reads with a very slow reflink operation to see if the reads
> +# actually complete while the reflink is ongoing.  This is a functionality
> +# test for XFS commit f3ba4762fa56 "xfs: allow read IO and FICLONE to run
> +# concurrently".
> +#
> +. ./common/preamble
> +_begin_fstest auto clone punch
> +
> +# Import common functions.
> +. ./common/filter
> +. ./common/attr
> +. ./common/reflink
> +
> +# real QA test starts here
> +_require_scratch_reflink
> +_require_cp_reflink
> +_require_xfs_io_command "fpunch"
> +_require_test_program "punch-alternating"
> +_require_test_program "t_reflink_read_race"
> +
> +rm -f "$seqres.full"
> +
> +echo "Format and mount"
> +_scratch_mkfs > "$seqres.full" 2>&1
> +_scratch_mount >> "$seqres.full" 2>&1
> +
> +testdir="$SCRATCH_MNT/test-$seq"
> +mkdir "$testdir"
> +
> +calc_space() {
> +	blocks_needed=$(( 2 ** (fnr + 1) ))
> +	space_needed=$((blocks_needed * blksz * 5 / 4))
> +}
> +
> +# Figure out the number of blocks that we need to get the reflink runtime above
> +# 1 seconds
> +echo "Create a many-block file"
> +for ((fnr = 1; fnr < 40; fnr++)); do
> +	free_blocks=$(stat -f -c '%a' "$testdir")
> +	blksz=$(_get_file_block_size "$testdir")
> +	space_avail=$((free_blocks * blksz))
> +	calc_space
> +	test $space_needed -gt $space_avail && \
> +		_notrun "Insufficient space for stress test; would only create $blocks_needed extents."
> +
> +	off=$(( (2 ** fnr) * blksz))
> +	$XFS_IO_PROG -f -c "pwrite -S 0x61 -b 4194304 $off $off" "$testdir/file1" >> "$seqres.full"
> +	"$here/src/punch-alternating" "$testdir/file1" >> "$seqres.full"
> +
> +	timeout 1s cp --reflink=always "$testdir/file1" "$testdir/garbage" || break

To make sure we have this program:
  _require_command "$TIMEOUT_PROG" timeout
then use $TIMEOUT_PROG at here.

Others looks good to me, if it expects to get below failure on linux 6.6.0-rc6+.

# ./check generic/1953
FSTYP         -- xfs (debug)
PLATFORM      -- Linux/x86_64 hp-dl380pg8-01 6.6.0-rc6-mainline+ #7 SMP PREEMPT_DYNAMIC Thu Oct 19 22:34:28 CST 2023
MKFS_OPTIONS  -- -f /dev/loop0
MOUNT_OPTIONS -- -o context=system_u:object_r:root_t:s0 /dev/loop0 /mnt/scratch

generic/1953       - output mismatch (see /root/git/xfstests/results//generic/1953.out.bad)
    --- tests/generic/1953.out  2023-11-10 22:22:12.379185281 +0800
    +++ /root/git/xfstests/results//generic/1953.out.bad        2023-11-10 22:28:27.041801352 +0800
    @@ -3,4 +3,4 @@
     Create a many-block file
     Reflink the big file
     Terminated
    -test completed successfully
    +clone finished before any reads
    ...
    (Run 'diff -u /root/git/xfstests/tests/generic/1953.out /root/git/xfstests/results//generic/1953.out.bad'  to see the entire diff)
Ran: generic/1953
Failures: generic/1953
Failed 1 of 1 tests

Thanks,
Zorro

> +done
> +echo "fnr=$fnr" >> $seqres.full
> +
> +echo "Reflink the big file"
> +$here/src/t_reflink_read_race "$testdir/file1" "$testdir/file2" \
> +	"$testdir/outcome" &>> $seqres.full
> +
> +if [ ! -e "$testdir/outcome" ]; then
> +	echo "Could not set up program"
> +elif grep -q "finished read early" "$testdir/outcome"; then
> +	echo "test completed successfully"
> +else
> +	cat "$testdir/outcome"
> +fi
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/generic/1953.out b/tests/generic/1953.out
> new file mode 100644
> index 0000000000..8eaacb7ff0
> --- /dev/null
> +++ b/tests/generic/1953.out
> @@ -0,0 +1,6 @@
> +QA output created by 1953
> +Format and mount
> +Create a many-block file
> +Reflink the big file
> +Terminated
> +test completed successfully
>
Darrick J. Wong Nov. 11, 2023, 10:20 p.m. UTC | #2 
On Fri, Nov 10, 2023 at 10:40:19PM +0800, Zorro Lang wrote:
> On Wed, Nov 08, 2023 at 01:29:28PM -0800, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@kernel.org>
> > 
> > XFS has a rather slow reflink operation.  While a reflink operation is
> > running, other programs cannot read the contents of the source file,
> > which is causing latency spikes.  Catherine Hoang wrote a patch to
> > permit reads, since the source file contents do not change.  This is a
> > functionality test for that patch.
> > 
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > Reviewed-by: Christoph Hellwig <hch@lst.de>
> > Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
> > ---
> >  configure.ac              |    1 
> >  include/builddefs.in      |    1 
> >  m4/package_libcdev.m4     |   12 ++
> >  src/Makefile              |    4 +
> >  src/t_reflink_read_race.c |  339 +++++++++++++++++++++++++++++++++++++++++++++
> >  tests/generic/1953        |   74 ++++++++++
> >  tests/generic/1953.out    |    6 +
> >  7 files changed, 437 insertions(+)
> >  create mode 100644 src/t_reflink_read_race.c
> >  create mode 100755 tests/generic/1953
> >  create mode 100644 tests/generic/1953.out
> > 
> > 
> > diff --git a/configure.ac b/configure.ac
> > index 4687d8a3c0..7333045330 100644
> > --- a/configure.ac
> > +++ b/configure.ac
> > @@ -71,6 +71,7 @@ AC_HAVE_BMV_OF_SHARED
> >  AC_HAVE_NFTW
> >  AC_HAVE_RLIMIT_NOFILE
> >  AC_HAVE_FIEXCHANGE
> > +AC_HAVE_FICLONE
> >  
> >  AC_CHECK_FUNCS([renameat2])
> >  AC_CHECK_FUNCS([reallocarray])
> > diff --git a/include/builddefs.in b/include/builddefs.in
> > index 969acf0da2..446350d5fc 100644
> > --- a/include/builddefs.in
> > +++ b/include/builddefs.in
> > @@ -73,6 +73,7 @@ HAVE_NFTW = @have_nftw@
> >  HAVE_BMV_OF_SHARED = @have_bmv_of_shared@
> >  HAVE_RLIMIT_NOFILE = @have_rlimit_nofile@
> >  HAVE_FIEXCHANGE = @have_fiexchange@
> > +HAVE_FICLONE = @have_ficlone@
> >  
> >  GCCFLAGS = -funsigned-char -fno-strict-aliasing -Wall
> >  
> > diff --git a/m4/package_libcdev.m4 b/m4/package_libcdev.m4
> > index 7f73104405..91eb64db21 100644
> > --- a/m4/package_libcdev.m4
> > +++ b/m4/package_libcdev.m4
> > @@ -173,4 +173,16 @@ AC_DEFUN([AC_HAVE_FIEXCHANGE],
> >      ]])],[have_fiexchange=yes
> >         AC_MSG_RESULT(yes)],[AC_MSG_RESULT(no)])
> >      AC_SUBST(have_fiexchange)
> > +
> > +# Check if we have FICLONE
> > +AC_DEFUN([AC_HAVE_FICLONE],
> > +  [ AC_MSG_CHECKING([for FICLONE])
> > +    AC_LINK_IFELSE([AC_LANG_PROGRAM([[
> > +#include <sys/ioctl.h>
> > +#include <linux/fs.h>
> > +    ]], [[
> > +	 ioctl(-1, FICLONE, -1);
> > +    ]])],[have_ficlone=yes
> > +       AC_MSG_RESULT(yes)],[AC_MSG_RESULT(no)])
> > +    AC_SUBST(have_ficlone)
> 
> I got below build error:
>   libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
>   cp include/install-sh .
>   aclocal -I m4
>   /usr/bin/m4:m4/package_libcdev.m4:162: ERROR: end of file in string
>   autom4te: error: /usr/bin/m4 failed with exit status: 1
>   aclocal: error: autom4te failed with exit status: 1
>   make: *** [Makefile:66: configure] Error 1
> 
> I think you missed a "])" at here, below "])" belong to last AC_DEFUN.

Yep, that was a porting bug when I reshuffled the patches.

> >    ])
> > diff --git a/src/Makefile b/src/Makefile
> > index 2815f919b2..49dd2f6c1e 100644
> > --- a/src/Makefile
> > +++ b/src/Makefile
> > @@ -94,6 +94,10 @@ ifeq ($(HAVE_SEEK_DATA), yes)
> >   endif
> >  endif
> >  
> > +ifeq ($(HAVE_FICLONE),yes)
> > +     TARGETS += t_reflink_read_race
> > +endif
> > +
> >  CFILES = $(TARGETS:=.c)
> >  LDIRT = $(TARGETS) fssum
> >  
> 
> [snip]
> 
> > diff --git a/tests/generic/1953 b/tests/generic/1953
> > new file mode 100755
> > index 0000000000..058538e6fe
> > --- /dev/null
> > +++ b/tests/generic/1953
> > @@ -0,0 +1,74 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2023, Oracle and/or its affiliates.  All Rights Reserved.
> > +#
> > +# FS QA Test No. 1953
> > +#
> > +# Race file reads with a very slow reflink operation to see if the reads
> > +# actually complete while the reflink is ongoing.  This is a functionality
> > +# test for XFS commit f3ba4762fa56 "xfs: allow read IO and FICLONE to run
> > +# concurrently".
> > +#
> > +. ./common/preamble
> > +_begin_fstest auto clone punch
> > +
> > +# Import common functions.
> > +. ./common/filter
> > +. ./common/attr
> > +. ./common/reflink
> > +
> > +# real QA test starts here
> > +_require_scratch_reflink
> > +_require_cp_reflink
> > +_require_xfs_io_command "fpunch"
> > +_require_test_program "punch-alternating"
> > +_require_test_program "t_reflink_read_race"
> > +
> > +rm -f "$seqres.full"
> > +
> > +echo "Format and mount"
> > +_scratch_mkfs > "$seqres.full" 2>&1
> > +_scratch_mount >> "$seqres.full" 2>&1
> > +
> > +testdir="$SCRATCH_MNT/test-$seq"
> > +mkdir "$testdir"
> > +
> > +calc_space() {
> > +	blocks_needed=$(( 2 ** (fnr + 1) ))
> > +	space_needed=$((blocks_needed * blksz * 5 / 4))
> > +}
> > +
> > +# Figure out the number of blocks that we need to get the reflink runtime above
> > +# 1 seconds
> > +echo "Create a many-block file"
> > +for ((fnr = 1; fnr < 40; fnr++)); do
> > +	free_blocks=$(stat -f -c '%a' "$testdir")
> > +	blksz=$(_get_file_block_size "$testdir")
> > +	space_avail=$((free_blocks * blksz))
> > +	calc_space
> > +	test $space_needed -gt $space_avail && \
> > +		_notrun "Insufficient space for stress test; would only create $blocks_needed extents."
> > +
> > +	off=$(( (2 ** fnr) * blksz))
> > +	$XFS_IO_PROG -f -c "pwrite -S 0x61 -b 4194304 $off $off" "$testdir/file1" >> "$seqres.full"
> > +	"$here/src/punch-alternating" "$testdir/file1" >> "$seqres.full"
> > +
> > +	timeout 1s cp --reflink=always "$testdir/file1" "$testdir/garbage" || break
> 
> To make sure we have this program:
>   _require_command "$TIMEOUT_PROG" timeout
> then use $TIMEOUT_PROG at here.

<shrug> timeout is in coreutils, is that not a requirement?

Will add anyway.

> Others looks good to me, if it expects to get below failure on linux 6.6.0-rc6+.
> 
> # ./check generic/1953
> FSTYP         -- xfs (debug)
> PLATFORM      -- Linux/x86_64 hp-dl380pg8-01 6.6.0-rc6-mainline+ #7 SMP PREEMPT_DYNAMIC Thu Oct 19 22:34:28 CST 2023
> MKFS_OPTIONS  -- -f /dev/loop0
> MOUNT_OPTIONS -- -o context=system_u:object_r:root_t:s0 /dev/loop0 /mnt/scratch
> 
> generic/1953       - output mismatch (see /root/git/xfstests/results//generic/1953.out.bad)
>     --- tests/generic/1953.out  2023-11-10 22:22:12.379185281 +0800
>     +++ /root/git/xfstests/results//generic/1953.out.bad        2023-11-10 22:28:27.041801352 +0800
>     @@ -3,4 +3,4 @@
>      Create a many-block file
>      Reflink the big file
>      Terminated
>     -test completed successfully
>     +clone finished before any reads
>     ...
>     (Run 'diff -u /root/git/xfstests/tests/generic/1953.out /root/git/xfstests/results//generic/1953.out.bad'  to see the entire diff)
> Ran: generic/1953
> Failures: generic/1953
> Failed 1 of 1 tests

This output is correct for 6.6; the functionality examined by this test
was merged for 6.7-rc1.

--D

> 
> Thanks,
> Zorro
> 
> > +done
> > +echo "fnr=$fnr" >> $seqres.full
> > +
> > +echo "Reflink the big file"
> > +$here/src/t_reflink_read_race "$testdir/file1" "$testdir/file2" \
> > +	"$testdir/outcome" &>> $seqres.full
> > +
> > +if [ ! -e "$testdir/outcome" ]; then
> > +	echo "Could not set up program"
> > +elif grep -q "finished read early" "$testdir/outcome"; then
> > +	echo "test completed successfully"
> > +else
> > +	cat "$testdir/outcome"
> > +fi
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/generic/1953.out b/tests/generic/1953.out
> > new file mode 100644
> > index 0000000000..8eaacb7ff0
> > --- /dev/null
> > +++ b/tests/generic/1953.out
> > @@ -0,0 +1,6 @@
> > +QA output created by 1953
> > +Format and mount
> > +Create a many-block file
> > +Reflink the big file
> > +Terminated
> > +test completed successfully
> > 
> 
>
diff mbox series

Patch

diff --git a/configure.ac b/configure.ac
index 4687d8a3c0..7333045330 100644
--- a/configure.ac
+++ b/configure.ac
@@ -71,6 +71,7 @@  AC_HAVE_BMV_OF_SHARED
 AC_HAVE_NFTW
 AC_HAVE_RLIMIT_NOFILE
 AC_HAVE_FIEXCHANGE
+AC_HAVE_FICLONE
 
 AC_CHECK_FUNCS([renameat2])
 AC_CHECK_FUNCS([reallocarray])
diff --git a/include/builddefs.in b/include/builddefs.in
index 969acf0da2..446350d5fc 100644
--- a/include/builddefs.in
+++ b/include/builddefs.in
@@ -73,6 +73,7 @@  HAVE_NFTW = @have_nftw@
 HAVE_BMV_OF_SHARED = @have_bmv_of_shared@
 HAVE_RLIMIT_NOFILE = @have_rlimit_nofile@
 HAVE_FIEXCHANGE = @have_fiexchange@
+HAVE_FICLONE = @have_ficlone@
 
 GCCFLAGS = -funsigned-char -fno-strict-aliasing -Wall
 
diff --git a/m4/package_libcdev.m4 b/m4/package_libcdev.m4
index 7f73104405..91eb64db21 100644
--- a/m4/package_libcdev.m4
+++ b/m4/package_libcdev.m4
@@ -173,4 +173,16 @@  AC_DEFUN([AC_HAVE_FIEXCHANGE],
     ]])],[have_fiexchange=yes
        AC_MSG_RESULT(yes)],[AC_MSG_RESULT(no)])
     AC_SUBST(have_fiexchange)
+
+# Check if we have FICLONE
+AC_DEFUN([AC_HAVE_FICLONE],
+  [ AC_MSG_CHECKING([for FICLONE])
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([[
+#include <sys/ioctl.h>
+#include <linux/fs.h>
+    ]], [[
+	 ioctl(-1, FICLONE, -1);
+    ]])],[have_ficlone=yes
+       AC_MSG_RESULT(yes)],[AC_MSG_RESULT(no)])
+    AC_SUBST(have_ficlone)
   ])
diff --git a/src/Makefile b/src/Makefile
index 2815f919b2..49dd2f6c1e 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -94,6 +94,10 @@  ifeq ($(HAVE_SEEK_DATA), yes)
  endif
 endif
 
+ifeq ($(HAVE_FICLONE),yes)
+     TARGETS += t_reflink_read_race
+endif
+
 CFILES = $(TARGETS:=.c)
 LDIRT = $(TARGETS) fssum
 
diff --git a/src/t_reflink_read_race.c b/src/t_reflink_read_race.c
new file mode 100644
index 0000000000..00c19d7c05
--- /dev/null
+++ b/src/t_reflink_read_race.c
@@ -0,0 +1,339 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Race reads with reflink to see if reads continue while we're cloning.
+ * Copyright 2023 Oracle.  All rights reserved.
+ */
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/ioctl.h>
+#include <linux/fs.h>
+#include <time.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <pthread.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+
+static pid_t mypid;
+
+static FILE *outcome_fp;
+
+/* Significant timestamps.  Initialized to zero */
+static double program_start, clone_start, clone_end;
+
+/* Coordinates access to timestamps */
+static pthread_mutex_t lock = PTHREAD_MUTEX_INITIALIZER;
+
+struct readinfo {
+	int fd;
+	unsigned int blocksize;
+	char *descr;
+};
+
+struct cloneinfo {
+	int src_fd, dst_fd;
+};
+
+#define MSEC_PER_SEC	1000
+#define NSEC_PER_MSEC	1000000
+
+/*
+ * Assume that it shouldn't take longer than 100ms for the FICLONE ioctl to
+ * enter the kernel and take locks on an uncontended file.  This is also the
+ * required CLOCK_MONOTONIC granularity.
+ */
+#define EARLIEST_READ_MS	(MSEC_PER_SEC / 10)
+
+/*
+ * We want to be reasonably sure that the FICLONE takes long enough that any
+ * read initiated after clone operation locked the source file could have
+ * completed a disk IO before the clone finishes.  Therefore, we require that
+ * the clone operation must take at least 4x the maximum setup time.
+ */
+#define MINIMUM_CLONE_MS	(EARLIEST_READ_MS * 5)
+
+static double timespec_to_msec(const struct timespec *ts)
+{
+	return (ts->tv_sec * (double)MSEC_PER_SEC) +
+	       (ts->tv_nsec / (double)NSEC_PER_MSEC);
+}
+
+static void sleep_ms(unsigned int len)
+{
+	struct timespec time = {
+		.tv_nsec = len * NSEC_PER_MSEC,
+	};
+
+	nanosleep(&time, NULL);
+}
+
+static void outcome(const char *str)
+{
+	fprintf(outcome_fp, "%s\n", str);
+	fflush(outcome_fp);
+}
+
+static void *reader_fn(void *arg)
+{
+	struct timespec now;
+	struct readinfo *ri = arg;
+	char *buf = malloc(ri->blocksize);
+	loff_t pos = 0;
+	ssize_t copied;
+	int ret;
+
+	if (!buf) {
+		perror("alloc buffer");
+		goto kill_error;
+	}
+
+	/* Wait for the FICLONE to start */
+	pthread_mutex_lock(&lock);
+	while (clone_start < program_start) {
+		pthread_mutex_unlock(&lock);
+#ifdef DEBUG
+		printf("%s read waiting for clone to start; cs=%.2f ps=%.2f\n",
+				ri->descr, clone_start, program_start);
+		fflush(stdout);
+#endif
+		sleep_ms(1);
+		pthread_mutex_lock(&lock);
+	}
+	pthread_mutex_unlock(&lock);
+	sleep_ms(EARLIEST_READ_MS);
+
+	/* Read from the file... */
+	while ((copied = read(ri->fd, buf, ri->blocksize)) > 0) {
+		double read_completion;
+
+		ret = clock_gettime(CLOCK_MONOTONIC, &now);
+		if (ret) {
+			perror("clock_gettime");
+			goto kill_error;
+		}
+		read_completion = timespec_to_msec(&now);
+
+		/*
+		 * If clone_end is still zero, the FICLONE is still running.
+		 * If the read completion occurred a safe duration after the
+		 * start of the ioctl, then report that as an early read
+		 * completion.
+		 */
+		pthread_mutex_lock(&lock);
+		if (clone_end < program_start &&
+		    read_completion > clone_start + EARLIEST_READ_MS) {
+			pthread_mutex_unlock(&lock);
+
+			/* clone still running... */
+			printf("finished %s read early at %.2fms\n",
+					ri->descr,
+					read_completion - program_start);
+			fflush(stdout);
+			outcome("finished read early");
+			goto kill_done;
+		}
+		pthread_mutex_unlock(&lock);
+
+		sleep_ms(1);
+		pos += copied;
+	}
+	if (copied < 0) {
+		perror("read");
+		goto kill_error;
+	}
+
+	return NULL;
+kill_error:
+	outcome("reader error");
+kill_done:
+	kill(mypid, SIGTERM);
+	return NULL;
+}
+
+static void *clone_fn(void *arg)
+{
+	struct timespec now;
+	struct cloneinfo *ci = arg;
+	int ret;
+
+	/* Record the approximate start time of this thread */
+	ret = clock_gettime(CLOCK_MONOTONIC, &now);
+	if (ret) {
+		perror("clock_gettime clone start");
+		goto kill_error;
+	}
+	pthread_mutex_lock(&lock);
+	clone_start = timespec_to_msec(&now);
+	pthread_mutex_unlock(&lock);
+
+	printf("started clone at %.2fms\n", clone_start - program_start);
+	fflush(stdout);
+
+	/* Kernel call, only killable with a fatal signal */
+	ret = ioctl(ci->dst_fd, FICLONE, ci->src_fd);
+	if (ret) {
+		perror("FICLONE");
+		goto kill_error;
+	}
+
+	/* If the ioctl completes, note the completion time */
+	ret = clock_gettime(CLOCK_MONOTONIC, &now);
+	if (ret) {
+		perror("clock_gettime clone end");
+		goto kill_error;
+	}
+
+	pthread_mutex_lock(&lock);
+	clone_end = timespec_to_msec(&now);
+	pthread_mutex_unlock(&lock);
+
+	printf("finished clone at %.2fms\n",
+			clone_end - program_start);
+	fflush(stdout);
+
+	/* Complain if we didn't take long enough to clone. */
+	if (clone_end < clone_start + MINIMUM_CLONE_MS) {
+		printf("clone did not take enough time (%.2fms)\n",
+				clone_end - clone_start);
+		fflush(stdout);
+		outcome("clone too fast");
+		goto kill_done;
+	}
+
+	outcome("clone finished before any reads");
+	goto kill_done;
+
+kill_error:
+	outcome("clone error");
+kill_done:
+	kill(mypid, SIGTERM);
+	return NULL;
+}
+
+int main(int argc, char *argv[])
+{
+	struct cloneinfo ci;
+	struct readinfo bufio = { .descr = "buffered" };
+	struct readinfo directio = { .descr = "directio" };
+	struct timespec now;
+	pthread_t clone_thread, bufio_thread, directio_thread;
+	double clockres;
+	int ret;
+
+	if (argc != 4) {
+		printf("Usage: %s src_file dst_file outcome_file\n", argv[0]);
+		return 1;
+	}
+
+	mypid = getpid();
+
+	/* Check for sufficient clock precision. */
+	ret = clock_getres(CLOCK_MONOTONIC, &now);
+	if (ret) {
+		perror("clock_getres MONOTONIC");
+		return 2;
+	}
+	printf("CLOCK_MONOTONIC resolution: %llus %luns\n",
+			(unsigned long long)now.tv_sec,
+			(unsigned long)now.tv_nsec);
+	fflush(stdout);
+
+	clockres = timespec_to_msec(&now);
+	if (clockres > EARLIEST_READ_MS) {
+		fprintf(stderr, "insufficient CLOCK_MONOTONIC resolution\n");
+		return 2;
+	}
+
+	/*
+	 * Measure program start time since the MONOTONIC time base is not
+	 * all that well defined.
+	 */
+	ret = clock_gettime(CLOCK_MONOTONIC, &now);
+	if (ret) {
+		perror("clock_gettime MONOTONIC");
+		return 2;
+	}
+	if (now.tv_sec == 0 && now.tv_nsec == 0) {
+		fprintf(stderr, "Uhoh, start time is zero?!\n");
+		return 2;
+	}
+	program_start = timespec_to_msec(&now);
+
+	outcome_fp = fopen(argv[3], "w");
+	if (!outcome_fp) {
+		perror(argv[3]);
+		return 2;
+	}
+
+	/* Open separate fds for each thread */
+	ci.src_fd = open(argv[1], O_RDONLY);
+	if (ci.src_fd < 0) {
+		perror(argv[1]);
+		return 2;
+	}
+
+	ci.dst_fd = open(argv[2], O_RDWR | O_CREAT, 0600);
+	if (ci.dst_fd < 0) {
+		perror(argv[2]);
+		return 2;
+	}
+
+	bufio.fd = open(argv[1], O_RDONLY);
+	if (bufio.fd < 0) {
+		perror(argv[1]);
+		return 2;
+	}
+	bufio.blocksize = 37;
+
+	directio.fd = open(argv[1], O_RDONLY | O_DIRECT);
+	if (directio.fd < 0) {
+		perror(argv[1]);
+		return 2;
+	}
+	directio.blocksize = 512;
+
+	/* Start threads */
+	ret = pthread_create(&clone_thread, NULL, clone_fn, &ci);
+	if (ret) {
+		fprintf(stderr, "create clone thread: %s\n", strerror(ret));
+		return 2;
+	}
+
+	ret = pthread_create(&bufio_thread, NULL, reader_fn, &bufio);
+	if (ret) {
+		fprintf(stderr, "create bufio thread: %s\n", strerror(ret));
+		return 2;
+	}
+
+	ret = pthread_create(&directio_thread, NULL, reader_fn, &directio);
+	if (ret) {
+		fprintf(stderr, "create directio thread: %s\n", strerror(ret));
+		return 2;
+	}
+
+	/* Wait for threads */
+	ret = pthread_join(clone_thread, NULL);
+	if (ret) {
+		fprintf(stderr, "join clone thread: %s\n", strerror(ret));
+		return 2;
+	}
+
+	ret = pthread_join(bufio_thread, NULL);
+	if (ret) {
+		fprintf(stderr, "join bufio thread: %s\n", strerror(ret));
+		return 2;
+	}
+
+	ret = pthread_join(directio_thread, NULL);
+	if (ret) {
+		fprintf(stderr, "join directio thread: %s\n", strerror(ret));
+		return 2;
+	}
+
+	printf("Program should have killed itself?\n");
+	outcome("program failed to end early");
+	return 0;
+}
diff --git a/tests/generic/1953 b/tests/generic/1953
new file mode 100755
index 0000000000..058538e6fe
--- /dev/null
+++ b/tests/generic/1953
@@ -0,0 +1,74 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2023, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# FS QA Test No. 1953
+#
+# Race file reads with a very slow reflink operation to see if the reads
+# actually complete while the reflink is ongoing.  This is a functionality
+# test for XFS commit f3ba4762fa56 "xfs: allow read IO and FICLONE to run
+# concurrently".
+#
+. ./common/preamble
+_begin_fstest auto clone punch
+
+# Import common functions.
+. ./common/filter
+. ./common/attr
+. ./common/reflink
+
+# real QA test starts here
+_require_scratch_reflink
+_require_cp_reflink
+_require_xfs_io_command "fpunch"
+_require_test_program "punch-alternating"
+_require_test_program "t_reflink_read_race"
+
+rm -f "$seqres.full"
+
+echo "Format and mount"
+_scratch_mkfs > "$seqres.full" 2>&1
+_scratch_mount >> "$seqres.full" 2>&1
+
+testdir="$SCRATCH_MNT/test-$seq"
+mkdir "$testdir"
+
+calc_space() {
+	blocks_needed=$(( 2 ** (fnr + 1) ))
+	space_needed=$((blocks_needed * blksz * 5 / 4))
+}
+
+# Figure out the number of blocks that we need to get the reflink runtime above
+# 1 seconds
+echo "Create a many-block file"
+for ((fnr = 1; fnr < 40; fnr++)); do
+	free_blocks=$(stat -f -c '%a' "$testdir")
+	blksz=$(_get_file_block_size "$testdir")
+	space_avail=$((free_blocks * blksz))
+	calc_space
+	test $space_needed -gt $space_avail && \
+		_notrun "Insufficient space for stress test; would only create $blocks_needed extents."
+
+	off=$(( (2 ** fnr) * blksz))
+	$XFS_IO_PROG -f -c "pwrite -S 0x61 -b 4194304 $off $off" "$testdir/file1" >> "$seqres.full"
+	"$here/src/punch-alternating" "$testdir/file1" >> "$seqres.full"
+
+	timeout 1s cp --reflink=always "$testdir/file1" "$testdir/garbage" || break
+done
+echo "fnr=$fnr" >> $seqres.full
+
+echo "Reflink the big file"
+$here/src/t_reflink_read_race "$testdir/file1" "$testdir/file2" \
+	"$testdir/outcome" &>> $seqres.full
+
+if [ ! -e "$testdir/outcome" ]; then
+	echo "Could not set up program"
+elif grep -q "finished read early" "$testdir/outcome"; then
+	echo "test completed successfully"
+else
+	cat "$testdir/outcome"
+fi
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/1953.out b/tests/generic/1953.out
new file mode 100644
index 0000000000..8eaacb7ff0
--- /dev/null
+++ b/tests/generic/1953.out
@@ -0,0 +1,6 @@ 
+QA output created by 1953
+Format and mount
+Create a many-block file
+Reflink the big file
+Terminated
+test completed successfully