Message ID | 20170803154900.GR4477@magnolia (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
On Thu, Aug 03, 2017 at 08:49:00AM -0700, Darrick J. Wong wrote: > Refactor the XFS error injection helpers to use the new errortag > interface to configure error injection. If that isn't present, fall > back either to the xfs_io/ioctl based injection or the older sysfs > knobs. Refactor existing testcases to use the new helpers. > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> > --- > v2: fix name of the 'find knob' function to communicate that it takes a > mountpoint's device, not the mountpoint itself; check for debug before > we check for knobs > --- > common/inject | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- > tests/xfs/141 | 5 +++-- > tests/xfs/196 | 17 ++++++---------- > 3 files changed, 66 insertions(+), 15 deletions(-) > > diff --git a/common/inject b/common/inject > index 8ecc290..c1b7869 100644 > --- a/common/inject > +++ b/common/inject > @@ -35,12 +35,49 @@ _require_error_injection() > esac > } > > +# Find the errortag injection knob in sysfs for a given xfs mount's > +# block device. > +_find_xfs_mountdev_errortag_knob() > +{ > + dev="$1" > + knob="$2" > + shortdev="$(_short_dev "${dev}")" > + tagfile="/sys/fs/xfs/${shortdev}/errortag/${knob}" > + > + # Some of the new sysfs errortag knobs were previously available via > + # another sysfs path. > + case "${knob}" in > + "log_bad_crc") > + if [ ! -w "${tagfile}" ]; then > + tagfile="/sys/fs/xfs/${shortdev}/log/log_badcrc_factor" > + fi > + ;; > + "drop_writes") > + if [ ! -w "${tagfile}" ]; then > + tagfile="/sys/fs/xfs/${shortdev}/drop_writes" > + fi > + if [ ! -w "${tagfile}" ]; then > + tagfile="/sys/fs/xfs/${shortdev}/fail_writes" > + fi > + ;; > + *) > + ;; > + esac > + > + echo "${tagfile}" > +} > + > # Requires that xfs_io inject command knows about this error type > _require_xfs_io_error_injection() > { > type="$1" > _require_error_injection > > + # Can we find the error injection knobs via the new errortag > + # configuration mechanism? > + knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")" > + test -w "${knob}" && return > + > # NOTE: We can't actually test error injection here because xfs > # hasn't always range checked the argument to xfs_errortag_add. > # We also don't want to trip an error before we're ready to deal > @@ -54,16 +91,34 @@ _require_xfs_io_error_injection() > _test_inject_error() > { > type="$1" > + value="$2" > > - $XFS_IO_PROG -x -c "inject $type" $TEST_DIR > + knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")" > + if [ -w "${knob}" ]; then > + test -z "${value}" && value="default" > + echo -n "${value}" > "${knob}" > + elif [ -z "${value}" ] || [ "${value}" = "default" ]; then > + $XFS_IO_PROG -x -c "inject $type" $TEST_DIR > + else > + _notrun "Cannot inject error ${type} value ${value}." (Seems you missed the comments on this "_notrun" in my first reply :) I don't think _notrun belongs here, because at this point we should have already made sure, by _require_xfs_io_error_injection, that XFS does support the error injection we want. Something went wrong If we failed to inject the error. So I think "_fail" is more appropriate. > + fi > } > > # Inject an error into the scratch fs > _scratch_inject_error() > { > type="$1" > + value="$2" > > - $XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT > + knob="$(_find_xfs_mountdev_errortag_knob "${SCRATCH_DEV}" "${type}")" > + if [ -w "${knob}" ]; then > + test -z "${value}" && value="default" > + echo -n "${value}" > "${knob}" > + elif [ -z "${value}" ] || [ "${value}" = "default" ]; then > + $XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT > + else > + _notrun "Cannot inject error ${type} value ${value}." Same here. Thanks, Eryu > + fi > } > > # Unmount and remount the scratch device, dumping the log > diff --git a/tests/xfs/141 b/tests/xfs/141 > index 56ff14e..f61e524 100755 > --- a/tests/xfs/141 > +++ b/tests/xfs/141 > @@ -47,13 +47,14 @@ rm -f $seqres.full > > # get standard environment, filters and checks > . ./common/rc > +. ./common/inject > > # real QA test starts here > > # Modify as appropriate. > _supported_fs xfs > _supported_os Linux > -_require_xfs_sysfs $(_short_dev $TEST_DEV)/log/log_badcrc_factor > +_require_xfs_io_error_injection "log_bad_crc" > _require_scratch > _require_command "$KILLALL_PROG" killall > > @@ -69,7 +70,7 @@ for i in $(seq 1 5); do > # (increase this value to run fsstress longer). > factor=$((RANDOM % 100 + 1)) > echo iteration $i log_badcrc_factor: $factor >> $seqres.full 2>&1 > - echo $factor > /sys/fs/xfs/$sdev/log/log_badcrc_factor > + _scratch_inject_error "log_bad_crc" "$factor" > > # Run fsstress until the filesystem shuts down. It will shut down > # automatically when error injection triggers. > diff --git a/tests/xfs/196 b/tests/xfs/196 > index e9b0649..fe3f570 100755 > --- a/tests/xfs/196 > +++ b/tests/xfs/196 > @@ -45,6 +45,7 @@ _cleanup() > # get standard environment, filters and checks > . ./common/rc > . ./common/punch > +. ./common/inject > > # real QA test starts here > rm -f $seqres.full > @@ -53,13 +54,7 @@ rm -f $seqres.full > _supported_fs generic > _supported_os Linux > _require_scratch > - > -DROP_WRITES="drop_writes" > -# replace "drop_writes" with "fail_writes" for old kernel > -if [ -f /sys/fs/xfs/$(_short_dev $TEST_DEV)/fail_writes ];then > - DROP_WRITES="fail_writes" > -fi > -_require_xfs_sysfs $(_short_dev $TEST_DEV)/${DROP_WRITES} > +_require_xfs_io_error_injection "drop_writes" > > _scratch_mkfs >/dev/null 2>&1 > _scratch_mount > @@ -72,7 +67,7 @@ bytes=$((64 * 1024)) > $XFS_IO_PROG -f -c "pwrite 0 $bytes" $file >> $seqres.full 2>&1 > > # Enable write drops. All buffered writes are dropped from this point on. > -echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES > +_scratch_inject_error "drop_writes" 1 > > # Write every other 4k range to split the larger delalloc extent into many more > # smaller extents. Use pwrite because with write failures enabled, all > @@ -89,7 +84,7 @@ for i in $(seq 4096 8192 $endoff); do > $XFS_IO_PROG -c "pwrite $i 4k" $file >> $seqres.full 2>&1 > done > > -echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES > +_scratch_inject_error "drop_writes" 0 > > _scratch_cycle_mount > $XFS_IO_PROG -c 'bmap -vp' $file | _filter_bmap > @@ -104,9 +99,9 @@ for offset in $(seq 0 100 500); do > $XFS_IO_PROG -fc "pwrite ${offset}m 100m" $file >> $seqres.full 2>&1 > > punchoffset=$((offset + 75)) > - echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES > + _scratch_inject_error "drop_writes" > $XFS_IO_PROG -c "pwrite ${punchoffset}m 4k" $file >> $seqres.full 2>&1 > - echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES > + _scratch_inject_error "drop_writes" 0 > done > > echo "Silence is golden." > -- > To unsubscribe from this list: send the line "unsubscribe fstests" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-xfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 04, 2017 at 08:45:02AM +0800, Eryu Guan wrote: > On Thu, Aug 03, 2017 at 08:49:00AM -0700, Darrick J. Wong wrote: > > Refactor the XFS error injection helpers to use the new errortag > > interface to configure error injection. If that isn't present, fall > > back either to the xfs_io/ioctl based injection or the older sysfs > > knobs. Refactor existing testcases to use the new helpers. > > > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> > > --- > > v2: fix name of the 'find knob' function to communicate that it takes a > > mountpoint's device, not the mountpoint itself; check for debug before > > we check for knobs > > --- > > common/inject | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- > > tests/xfs/141 | 5 +++-- > > tests/xfs/196 | 17 ++++++---------- > > 3 files changed, 66 insertions(+), 15 deletions(-) > > > > diff --git a/common/inject b/common/inject > > index 8ecc290..c1b7869 100644 > > --- a/common/inject > > +++ b/common/inject > > @@ -35,12 +35,49 @@ _require_error_injection() > > esac > > } > > > > +# Find the errortag injection knob in sysfs for a given xfs mount's > > +# block device. > > +_find_xfs_mountdev_errortag_knob() > > +{ > > + dev="$1" > > + knob="$2" > > + shortdev="$(_short_dev "${dev}")" > > + tagfile="/sys/fs/xfs/${shortdev}/errortag/${knob}" > > + > > + # Some of the new sysfs errortag knobs were previously available via > > + # another sysfs path. > > + case "${knob}" in > > + "log_bad_crc") > > + if [ ! -w "${tagfile}" ]; then > > + tagfile="/sys/fs/xfs/${shortdev}/log/log_badcrc_factor" > > + fi > > + ;; > > + "drop_writes") > > + if [ ! -w "${tagfile}" ]; then > > + tagfile="/sys/fs/xfs/${shortdev}/drop_writes" > > + fi > > + if [ ! -w "${tagfile}" ]; then > > + tagfile="/sys/fs/xfs/${shortdev}/fail_writes" > > + fi > > + ;; > > + *) > > + ;; > > + esac > > + > > + echo "${tagfile}" > > +} > > + > > # Requires that xfs_io inject command knows about this error type > > _require_xfs_io_error_injection() > > { > > type="$1" > > _require_error_injection > > > > + # Can we find the error injection knobs via the new errortag > > + # configuration mechanism? > > + knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")" > > + test -w "${knob}" && return > > + > > # NOTE: We can't actually test error injection here because xfs > > # hasn't always range checked the argument to xfs_errortag_add. > > # We also don't want to trip an error before we're ready to deal > > @@ -54,16 +91,34 @@ _require_xfs_io_error_injection() > > _test_inject_error() > > { > > type="$1" > > + value="$2" > > > > - $XFS_IO_PROG -x -c "inject $type" $TEST_DIR > > + knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")" > > + if [ -w "${knob}" ]; then > > + test -z "${value}" && value="default" > > + echo -n "${value}" > "${knob}" > > + elif [ -z "${value}" ] || [ "${value}" = "default" ]; then > > + $XFS_IO_PROG -x -c "inject $type" $TEST_DIR > > + else > > + _notrun "Cannot inject error ${type} value ${value}." > > (Seems you missed the comments on this "_notrun" in my first reply :) > > I don't think _notrun belongs here, because at this point we should have > already made sure, by _require_xfs_io_error_injection, that XFS does > support the error injection we want. Something went wrong If we failed > to inject the error. So I think "_fail" is more appropriate. Oops. Will send v3 fixing both. > > + fi > > } > > > > # Inject an error into the scratch fs > > _scratch_inject_error() > > { > > type="$1" > > + value="$2" > > > > - $XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT > > + knob="$(_find_xfs_mountdev_errortag_knob "${SCRATCH_DEV}" "${type}")" > > + if [ -w "${knob}" ]; then > > + test -z "${value}" && value="default" > > + echo -n "${value}" > "${knob}" > > + elif [ -z "${value}" ] || [ "${value}" = "default" ]; then > > + $XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT > > + else > > + _notrun "Cannot inject error ${type} value ${value}." > > Same here. > > Thanks, > Eryu > > > + fi > > } > > > > # Unmount and remount the scratch device, dumping the log > > diff --git a/tests/xfs/141 b/tests/xfs/141 > > index 56ff14e..f61e524 100755 > > --- a/tests/xfs/141 > > +++ b/tests/xfs/141 > > @@ -47,13 +47,14 @@ rm -f $seqres.full > > > > # get standard environment, filters and checks > > . ./common/rc > > +. ./common/inject > > > > # real QA test starts here > > > > # Modify as appropriate. > > _supported_fs xfs > > _supported_os Linux > > -_require_xfs_sysfs $(_short_dev $TEST_DEV)/log/log_badcrc_factor > > +_require_xfs_io_error_injection "log_bad_crc" > > _require_scratch > > _require_command "$KILLALL_PROG" killall > > > > @@ -69,7 +70,7 @@ for i in $(seq 1 5); do > > # (increase this value to run fsstress longer). > > factor=$((RANDOM % 100 + 1)) > > echo iteration $i log_badcrc_factor: $factor >> $seqres.full 2>&1 > > - echo $factor > /sys/fs/xfs/$sdev/log/log_badcrc_factor > > + _scratch_inject_error "log_bad_crc" "$factor" > > > > # Run fsstress until the filesystem shuts down. It will shut down > > # automatically when error injection triggers. > > diff --git a/tests/xfs/196 b/tests/xfs/196 > > index e9b0649..fe3f570 100755 > > --- a/tests/xfs/196 > > +++ b/tests/xfs/196 > > @@ -45,6 +45,7 @@ _cleanup() > > # get standard environment, filters and checks > > . ./common/rc > > . ./common/punch > > +. ./common/inject > > > > # real QA test starts here > > rm -f $seqres.full > > @@ -53,13 +54,7 @@ rm -f $seqres.full > > _supported_fs generic > > _supported_os Linux > > _require_scratch > > - > > -DROP_WRITES="drop_writes" > > -# replace "drop_writes" with "fail_writes" for old kernel > > -if [ -f /sys/fs/xfs/$(_short_dev $TEST_DEV)/fail_writes ];then > > - DROP_WRITES="fail_writes" > > -fi > > -_require_xfs_sysfs $(_short_dev $TEST_DEV)/${DROP_WRITES} > > +_require_xfs_io_error_injection "drop_writes" > > > > _scratch_mkfs >/dev/null 2>&1 > > _scratch_mount > > @@ -72,7 +67,7 @@ bytes=$((64 * 1024)) > > $XFS_IO_PROG -f -c "pwrite 0 $bytes" $file >> $seqres.full 2>&1 > > > > # Enable write drops. All buffered writes are dropped from this point on. > > -echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES > > +_scratch_inject_error "drop_writes" 1 > > > > # Write every other 4k range to split the larger delalloc extent into many more > > # smaller extents. Use pwrite because with write failures enabled, all > > @@ -89,7 +84,7 @@ for i in $(seq 4096 8192 $endoff); do > > $XFS_IO_PROG -c "pwrite $i 4k" $file >> $seqres.full 2>&1 > > done > > > > -echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES > > +_scratch_inject_error "drop_writes" 0 > > > > _scratch_cycle_mount > > $XFS_IO_PROG -c 'bmap -vp' $file | _filter_bmap > > @@ -104,9 +99,9 @@ for offset in $(seq 0 100 500); do > > $XFS_IO_PROG -fc "pwrite ${offset}m 100m" $file >> $seqres.full 2>&1 > > > > punchoffset=$((offset + 75)) > > - echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES > > + _scratch_inject_error "drop_writes" > > $XFS_IO_PROG -c "pwrite ${punchoffset}m 4k" $file >> $seqres.full 2>&1 > > - echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES > > + _scratch_inject_error "drop_writes" 0 > > done > > > > echo "Silence is golden." > > -- > > To unsubscribe from this list: send the line "unsubscribe fstests" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-xfs" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-xfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/common/inject b/common/inject index 8ecc290..c1b7869 100644 --- a/common/inject +++ b/common/inject @@ -35,12 +35,49 @@ _require_error_injection() esac } +# Find the errortag injection knob in sysfs for a given xfs mount's +# block device. +_find_xfs_mountdev_errortag_knob() +{ + dev="$1" + knob="$2" + shortdev="$(_short_dev "${dev}")" + tagfile="/sys/fs/xfs/${shortdev}/errortag/${knob}" + + # Some of the new sysfs errortag knobs were previously available via + # another sysfs path. + case "${knob}" in + "log_bad_crc") + if [ ! -w "${tagfile}" ]; then + tagfile="/sys/fs/xfs/${shortdev}/log/log_badcrc_factor" + fi + ;; + "drop_writes") + if [ ! -w "${tagfile}" ]; then + tagfile="/sys/fs/xfs/${shortdev}/drop_writes" + fi + if [ ! -w "${tagfile}" ]; then + tagfile="/sys/fs/xfs/${shortdev}/fail_writes" + fi + ;; + *) + ;; + esac + + echo "${tagfile}" +} + # Requires that xfs_io inject command knows about this error type _require_xfs_io_error_injection() { type="$1" _require_error_injection + # Can we find the error injection knobs via the new errortag + # configuration mechanism? + knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")" + test -w "${knob}" && return + # NOTE: We can't actually test error injection here because xfs # hasn't always range checked the argument to xfs_errortag_add. # We also don't want to trip an error before we're ready to deal @@ -54,16 +91,34 @@ _require_xfs_io_error_injection() _test_inject_error() { type="$1" + value="$2" - $XFS_IO_PROG -x -c "inject $type" $TEST_DIR + knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")" + if [ -w "${knob}" ]; then + test -z "${value}" && value="default" + echo -n "${value}" > "${knob}" + elif [ -z "${value}" ] || [ "${value}" = "default" ]; then + $XFS_IO_PROG -x -c "inject $type" $TEST_DIR + else + _notrun "Cannot inject error ${type} value ${value}." + fi } # Inject an error into the scratch fs _scratch_inject_error() { type="$1" + value="$2" - $XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT + knob="$(_find_xfs_mountdev_errortag_knob "${SCRATCH_DEV}" "${type}")" + if [ -w "${knob}" ]; then + test -z "${value}" && value="default" + echo -n "${value}" > "${knob}" + elif [ -z "${value}" ] || [ "${value}" = "default" ]; then + $XFS_IO_PROG -x -c "inject $type" $SCRATCH_MNT + else + _notrun "Cannot inject error ${type} value ${value}." + fi } # Unmount and remount the scratch device, dumping the log diff --git a/tests/xfs/141 b/tests/xfs/141 index 56ff14e..f61e524 100755 --- a/tests/xfs/141 +++ b/tests/xfs/141 @@ -47,13 +47,14 @@ rm -f $seqres.full # get standard environment, filters and checks . ./common/rc +. ./common/inject # real QA test starts here # Modify as appropriate. _supported_fs xfs _supported_os Linux -_require_xfs_sysfs $(_short_dev $TEST_DEV)/log/log_badcrc_factor +_require_xfs_io_error_injection "log_bad_crc" _require_scratch _require_command "$KILLALL_PROG" killall @@ -69,7 +70,7 @@ for i in $(seq 1 5); do # (increase this value to run fsstress longer). factor=$((RANDOM % 100 + 1)) echo iteration $i log_badcrc_factor: $factor >> $seqres.full 2>&1 - echo $factor > /sys/fs/xfs/$sdev/log/log_badcrc_factor + _scratch_inject_error "log_bad_crc" "$factor" # Run fsstress until the filesystem shuts down. It will shut down # automatically when error injection triggers. diff --git a/tests/xfs/196 b/tests/xfs/196 index e9b0649..fe3f570 100755 --- a/tests/xfs/196 +++ b/tests/xfs/196 @@ -45,6 +45,7 @@ _cleanup() # get standard environment, filters and checks . ./common/rc . ./common/punch +. ./common/inject # real QA test starts here rm -f $seqres.full @@ -53,13 +54,7 @@ rm -f $seqres.full _supported_fs generic _supported_os Linux _require_scratch - -DROP_WRITES="drop_writes" -# replace "drop_writes" with "fail_writes" for old kernel -if [ -f /sys/fs/xfs/$(_short_dev $TEST_DEV)/fail_writes ];then - DROP_WRITES="fail_writes" -fi -_require_xfs_sysfs $(_short_dev $TEST_DEV)/${DROP_WRITES} +_require_xfs_io_error_injection "drop_writes" _scratch_mkfs >/dev/null 2>&1 _scratch_mount @@ -72,7 +67,7 @@ bytes=$((64 * 1024)) $XFS_IO_PROG -f -c "pwrite 0 $bytes" $file >> $seqres.full 2>&1 # Enable write drops. All buffered writes are dropped from this point on. -echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES +_scratch_inject_error "drop_writes" 1 # Write every other 4k range to split the larger delalloc extent into many more # smaller extents. Use pwrite because with write failures enabled, all @@ -89,7 +84,7 @@ for i in $(seq 4096 8192 $endoff); do $XFS_IO_PROG -c "pwrite $i 4k" $file >> $seqres.full 2>&1 done -echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES +_scratch_inject_error "drop_writes" 0 _scratch_cycle_mount $XFS_IO_PROG -c 'bmap -vp' $file | _filter_bmap @@ -104,9 +99,9 @@ for offset in $(seq 0 100 500); do $XFS_IO_PROG -fc "pwrite ${offset}m 100m" $file >> $seqres.full 2>&1 punchoffset=$((offset + 75)) - echo 1 > /sys/fs/xfs/$sdev/$DROP_WRITES + _scratch_inject_error "drop_writes" $XFS_IO_PROG -c "pwrite ${punchoffset}m 4k" $file >> $seqres.full 2>&1 - echo 0 > /sys/fs/xfs/$sdev/$DROP_WRITES + _scratch_inject_error "drop_writes" 0 done echo "Silence is golden."
Refactor the XFS error injection helpers to use the new errortag interface to configure error injection. If that isn't present, fall back either to the xfs_io/ioctl based injection or the older sysfs knobs. Refactor existing testcases to use the new helpers. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- v2: fix name of the 'find knob' function to communicate that it takes a mountpoint's device, not the mountpoint itself; check for debug before we check for knobs --- common/inject | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- tests/xfs/141 | 5 +++-- tests/xfs/196 | 17 ++++++---------- 3 files changed, 66 insertions(+), 15 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-xfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html