diff mbox series

xfs/420 and xfs/421: don't disturb unwritten status with md5sum

Message ID 20190218091951.GA5171@lst.de (mailing list archive)
State Accepted
Headers show
Series xfs/420 and xfs/421: don't disturb unwritten status with md5sum | expand

Commit Message

Christoph Hellwig Feb. 18, 2019, 9:19 a.m. UTC
The way we decided if an unwritten extent is considered a hole or data
is by checking if the page and/or blocks are marked uptodate, that is
contain valid data in the page cache.

xfs/420 and xfs/421 try to exercise SEEK_HOLE / SEEK_DATA in the
presence of cowextsize preallocations over holes in the data fork.  The
current XFS code never actually uses those for buffer writes, but a
pending patch changes that.  For SEEK_HOLE / SEEK_DATA to work properly
in that case we also need to look at the COW fork in their
implementations and thus have to rely on the unwritten extent page cache
probing.  But the tests for it ensure we do have valid data in the
pagecache by calling md5sum on the test files, and thus reading their
contents (including the zero-filled holes) in, and thus making them
all valid data.

Fix that by dropping the page cache content after the md5sum calls.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 tests/xfs/420 | 6 ++++++
 tests/xfs/421 | 6 ++++++
 2 files changed, 12 insertions(+)

Comments

Eryu Guan March 9, 2019, 10:32 a.m. UTC | #1
On Mon, Feb 18, 2019 at 10:19:51AM +0100, Christoph Hellwig wrote:
> The way we decided if an unwritten extent is considered a hole or data
> is by checking if the page and/or blocks are marked uptodate, that is
> contain valid data in the page cache.
> 
> xfs/420 and xfs/421 try to exercise SEEK_HOLE / SEEK_DATA in the
> presence of cowextsize preallocations over holes in the data fork.  The
> current XFS code never actually uses those for buffer writes, but a
> pending patch changes that.  For SEEK_HOLE / SEEK_DATA to work properly
> in that case we also need to look at the COW fork in their
> implementations and thus have to rely on the unwritten extent page cache
> probing.  But the tests for it ensure we do have valid data in the
> pagecache by calling md5sum on the test files, and thus reading their
> contents (including the zero-filled holes) in, and thus making them
> all valid data.
> 
> Fix that by dropping the page cache content after the md5sum calls.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Hi Darrick, would you please help review this version of the fix as
well? I basically have no idea about the implementation of the "pending
patch" and what it changes.. Thanks a lot!

Eryu

> ---
>  tests/xfs/420 | 6 ++++++
>  tests/xfs/421 | 6 ++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/tests/xfs/420 b/tests/xfs/420
> index a083a12b..34199637 100755
> --- a/tests/xfs/420
> +++ b/tests/xfs/420
> @@ -83,6 +83,8 @@ echo "Compare files"
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file3 | _filter_scratch
> +# drop caches to make sure the page cache for the unwritten extents is clean
> +echo 1 > /proc/sys/vm/drop_caches
>  
>  echo "CoW the shared part then write into the empty part" | tee -a $seqres.full
>  $XFS_IO_PROG -c "cowextsize" $testdir/file1 >> $seqres.full
> @@ -106,6 +108,8 @@ echo "Compare files"
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file3 | _filter_scratch
> +# drop caches to make sure the page cache for the unwritten extents is clean
> +echo 1 > /proc/sys/vm/drop_caches
>  
>  echo "sync filesystem" | tee -a $seqres.full
>  sync
> @@ -123,6 +127,8 @@ echo "Compare files"
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file3 | _filter_scratch
> +# drop caches to make sure the page cache for the unwritten extents is clean
> +echo 1 > /proc/sys/vm/drop_caches
>  
>  echo "Remount" | tee -a $seqres.full
>  _scratch_cycle_mount
> diff --git a/tests/xfs/421 b/tests/xfs/421
> index a2734aba..374389bd 100755
> --- a/tests/xfs/421
> +++ b/tests/xfs/421
> @@ -83,6 +83,8 @@ echo "Compare files"
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file3 | _filter_scratch
> +# drop caches to make sure the page cache for the unwritten extents is clean
> +echo 1 > /proc/sys/vm/drop_caches
>  
>  echo "CoW the shared part then write into the empty part" | tee -a $seqres.full
>  $XFS_IO_PROG -c "cowextsize" $testdir/file1 >> $seqres.full
> @@ -106,6 +108,8 @@ echo "Compare files"
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file3 | _filter_scratch
> +# drop caches to make sure the page cache for the unwritten extents is clean
> +echo 1 > /proc/sys/vm/drop_caches
>  
>  echo "sync filesystem" | tee -a $seqres.full
>  sync
> @@ -123,6 +127,8 @@ echo "Compare files"
>  md5sum $testdir/file1 | _filter_scratch
>  md5sum $testdir/file2 | _filter_scratch
>  md5sum $testdir/file3 | _filter_scratch
> +# drop caches to make sure the page cache for the unwritten extents is clean
> +echo 1 > /proc/sys/vm/drop_caches
>  
>  echo "Remount" | tee -a $seqres.full
>  _scratch_cycle_mount
> -- 
> 2.20.1
>
Darrick J. Wong March 9, 2019, 5:34 p.m. UTC | #2
On Sat, Mar 09, 2019 at 06:32:11PM +0800, Eryu Guan wrote:
> On Mon, Feb 18, 2019 at 10:19:51AM +0100, Christoph Hellwig wrote:
> > The way we decided if an unwritten extent is considered a hole or data
> > is by checking if the page and/or blocks are marked uptodate, that is
> > contain valid data in the page cache.
> > 
> > xfs/420 and xfs/421 try to exercise SEEK_HOLE / SEEK_DATA in the
> > presence of cowextsize preallocations over holes in the data fork.  The
> > current XFS code never actually uses those for buffer writes, but a
> > pending patch changes that.  For SEEK_HOLE / SEEK_DATA to work properly
> > in that case we also need to look at the COW fork in their
> > implementations and thus have to rely on the unwritten extent page cache
> > probing.  But the tests for it ensure we do have valid data in the
> > pagecache by calling md5sum on the test files, and thus reading their
> > contents (including the zero-filled holes) in, and thus making them
> > all valid data.
> > 
> > Fix that by dropping the page cache content after the md5sum calls.
> > 
> > Signed-off-by: Christoph Hellwig <hch@lst.de>
> 
> Hi Darrick, would you please help review this version of the fix as
> well? I basically have no idea about the implementation of the "pending
> patch" and what it changes.. Thanks a lot!

/me wonders if the "md5sum and drop caches" could be refactored a bit,
but as a strict bugfix for always_cow mode this looks ok to me:

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>

--D


> Eryu
> 
> > ---
> >  tests/xfs/420 | 6 ++++++
> >  tests/xfs/421 | 6 ++++++
> >  2 files changed, 12 insertions(+)
> > 
> > diff --git a/tests/xfs/420 b/tests/xfs/420
> > index a083a12b..34199637 100755
> > --- a/tests/xfs/420
> > +++ b/tests/xfs/420
> > @@ -83,6 +83,8 @@ echo "Compare files"
> >  md5sum $testdir/file1 | _filter_scratch
> >  md5sum $testdir/file2 | _filter_scratch
> >  md5sum $testdir/file3 | _filter_scratch
> > +# drop caches to make sure the page cache for the unwritten extents is clean
> > +echo 1 > /proc/sys/vm/drop_caches
> >  
> >  echo "CoW the shared part then write into the empty part" | tee -a $seqres.full
> >  $XFS_IO_PROG -c "cowextsize" $testdir/file1 >> $seqres.full
> > @@ -106,6 +108,8 @@ echo "Compare files"
> >  md5sum $testdir/file1 | _filter_scratch
> >  md5sum $testdir/file2 | _filter_scratch
> >  md5sum $testdir/file3 | _filter_scratch
> > +# drop caches to make sure the page cache for the unwritten extents is clean
> > +echo 1 > /proc/sys/vm/drop_caches
> >  
> >  echo "sync filesystem" | tee -a $seqres.full
> >  sync
> > @@ -123,6 +127,8 @@ echo "Compare files"
> >  md5sum $testdir/file1 | _filter_scratch
> >  md5sum $testdir/file2 | _filter_scratch
> >  md5sum $testdir/file3 | _filter_scratch
> > +# drop caches to make sure the page cache for the unwritten extents is clean
> > +echo 1 > /proc/sys/vm/drop_caches
> >  
> >  echo "Remount" | tee -a $seqres.full
> >  _scratch_cycle_mount
> > diff --git a/tests/xfs/421 b/tests/xfs/421
> > index a2734aba..374389bd 100755
> > --- a/tests/xfs/421
> > +++ b/tests/xfs/421
> > @@ -83,6 +83,8 @@ echo "Compare files"
> >  md5sum $testdir/file1 | _filter_scratch
> >  md5sum $testdir/file2 | _filter_scratch
> >  md5sum $testdir/file3 | _filter_scratch
> > +# drop caches to make sure the page cache for the unwritten extents is clean
> > +echo 1 > /proc/sys/vm/drop_caches
> >  
> >  echo "CoW the shared part then write into the empty part" | tee -a $seqres.full
> >  $XFS_IO_PROG -c "cowextsize" $testdir/file1 >> $seqres.full
> > @@ -106,6 +108,8 @@ echo "Compare files"
> >  md5sum $testdir/file1 | _filter_scratch
> >  md5sum $testdir/file2 | _filter_scratch
> >  md5sum $testdir/file3 | _filter_scratch
> > +# drop caches to make sure the page cache for the unwritten extents is clean
> > +echo 1 > /proc/sys/vm/drop_caches
> >  
> >  echo "sync filesystem" | tee -a $seqres.full
> >  sync
> > @@ -123,6 +127,8 @@ echo "Compare files"
> >  md5sum $testdir/file1 | _filter_scratch
> >  md5sum $testdir/file2 | _filter_scratch
> >  md5sum $testdir/file3 | _filter_scratch
> > +# drop caches to make sure the page cache for the unwritten extents is clean
> > +echo 1 > /proc/sys/vm/drop_caches
> >  
> >  echo "Remount" | tee -a $seqres.full
> >  _scratch_cycle_mount
> > -- 
> > 2.20.1
> >
diff mbox series

Patch

diff --git a/tests/xfs/420 b/tests/xfs/420
index a083a12b..34199637 100755
--- a/tests/xfs/420
+++ b/tests/xfs/420
@@ -83,6 +83,8 @@  echo "Compare files"
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file3 | _filter_scratch
+# drop caches to make sure the page cache for the unwritten extents is clean
+echo 1 > /proc/sys/vm/drop_caches
 
 echo "CoW the shared part then write into the empty part" | tee -a $seqres.full
 $XFS_IO_PROG -c "cowextsize" $testdir/file1 >> $seqres.full
@@ -106,6 +108,8 @@  echo "Compare files"
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file3 | _filter_scratch
+# drop caches to make sure the page cache for the unwritten extents is clean
+echo 1 > /proc/sys/vm/drop_caches
 
 echo "sync filesystem" | tee -a $seqres.full
 sync
@@ -123,6 +127,8 @@  echo "Compare files"
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file3 | _filter_scratch
+# drop caches to make sure the page cache for the unwritten extents is clean
+echo 1 > /proc/sys/vm/drop_caches
 
 echo "Remount" | tee -a $seqres.full
 _scratch_cycle_mount
diff --git a/tests/xfs/421 b/tests/xfs/421
index a2734aba..374389bd 100755
--- a/tests/xfs/421
+++ b/tests/xfs/421
@@ -83,6 +83,8 @@  echo "Compare files"
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file3 | _filter_scratch
+# drop caches to make sure the page cache for the unwritten extents is clean
+echo 1 > /proc/sys/vm/drop_caches
 
 echo "CoW the shared part then write into the empty part" | tee -a $seqres.full
 $XFS_IO_PROG -c "cowextsize" $testdir/file1 >> $seqres.full
@@ -106,6 +108,8 @@  echo "Compare files"
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file3 | _filter_scratch
+# drop caches to make sure the page cache for the unwritten extents is clean
+echo 1 > /proc/sys/vm/drop_caches
 
 echo "sync filesystem" | tee -a $seqres.full
 sync
@@ -123,6 +127,8 @@  echo "Compare files"
 md5sum $testdir/file1 | _filter_scratch
 md5sum $testdir/file2 | _filter_scratch
 md5sum $testdir/file3 | _filter_scratch
+# drop caches to make sure the page cache for the unwritten extents is clean
+echo 1 > /proc/sys/vm/drop_caches
 
 echo "Remount" | tee -a $seqres.full
 _scratch_cycle_mount