diff mbox series

[v2,01/34] mm/gup: add make_dirty arg to put_user_pages_dirty_lock()

Message ID 20190804224915.28669-2-jhubbard@nvidia.com (mailing list archive)
State Not Applicable, archived
Headers show
Series put_user_pages(): miscellaneous call sites | expand

Commit Message

john.hubbard@gmail.com Aug. 4, 2019, 10:48 p.m. UTC
From: John Hubbard <jhubbard@nvidia.com>

Provide a more capable variation of put_user_pages_dirty_lock(),
and delete put_user_pages_dirty(). This is based on the
following:

1. Lots of call sites become simpler if a bool is passed
into put_user_page*(), instead of making the call site
choose which put_user_page*() variant to call.

2. Christoph Hellwig's observation that set_page_dirty_lock()
is usually correct, and set_page_dirty() is usually a
bug, or at least questionable, within a put_user_page*()
calling chain.

This leads to the following API choices:

    * put_user_pages_dirty_lock(page, npages, make_dirty)

    * There is no put_user_pages_dirty(). You have to
      hand code that, in the rare case that it's
      required.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
 drivers/infiniband/core/umem.c             |   5 +-
 drivers/infiniband/hw/hfi1/user_pages.c    |   5 +-
 drivers/infiniband/hw/qib/qib_user_pages.c |  13 +--
 drivers/infiniband/hw/usnic/usnic_uiom.c   |   5 +-
 drivers/infiniband/sw/siw/siw_mem.c        |  19 +---
 include/linux/mm.h                         |   5 +-
 mm/gup.c                                   | 115 +++++++++------------
 7 files changed, 61 insertions(+), 106 deletions(-)

Comments

Ira Weiny Aug. 6, 2019, 5:39 p.m. UTC | #1
On Sun, Aug 04, 2019 at 03:48:42PM -0700, john.hubbard@gmail.com wrote:
> From: John Hubbard <jhubbard@nvidia.com>
> 
> Provide a more capable variation of put_user_pages_dirty_lock(),
> and delete put_user_pages_dirty(). This is based on the
> following:
> 
> 1. Lots of call sites become simpler if a bool is passed
> into put_user_page*(), instead of making the call site
> choose which put_user_page*() variant to call.
> 
> 2. Christoph Hellwig's observation that set_page_dirty_lock()
> is usually correct, and set_page_dirty() is usually a
> bug, or at least questionable, within a put_user_page*()
> calling chain.
> 
> This leads to the following API choices:
> 
>     * put_user_pages_dirty_lock(page, npages, make_dirty)
> 
>     * There is no put_user_pages_dirty(). You have to
>       hand code that, in the rare case that it's
>       required.
> 
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> Cc: Matthew Wilcox <willy@infradead.org>
> Cc: Jan Kara <jack@suse.cz>
> Cc: Ira Weiny <ira.weiny@intel.com>
> Cc: Jason Gunthorpe <jgg@ziepe.ca>
> Signed-off-by: John Hubbard <jhubbard@nvidia.com>
> ---
>  drivers/infiniband/core/umem.c             |   5 +-
>  drivers/infiniband/hw/hfi1/user_pages.c    |   5 +-
>  drivers/infiniband/hw/qib/qib_user_pages.c |  13 +--
>  drivers/infiniband/hw/usnic/usnic_uiom.c   |   5 +-
>  drivers/infiniband/sw/siw/siw_mem.c        |  19 +---
>  include/linux/mm.h                         |   5 +-
>  mm/gup.c                                   | 115 +++++++++------------
>  7 files changed, 61 insertions(+), 106 deletions(-)
> 
> diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
> index 08da840ed7ee..965cf9dea71a 100644
> --- a/drivers/infiniband/core/umem.c
> +++ b/drivers/infiniband/core/umem.c
> @@ -54,10 +54,7 @@ static void __ib_umem_release(struct ib_device *dev, struct ib_umem *umem, int d
>  
>  	for_each_sg_page(umem->sg_head.sgl, &sg_iter, umem->sg_nents, 0) {
>  		page = sg_page_iter_page(&sg_iter);
> -		if (umem->writable && dirty)
> -			put_user_pages_dirty_lock(&page, 1);
> -		else
> -			put_user_page(page);
> +		put_user_pages_dirty_lock(&page, 1, umem->writable && dirty);
>  	}
>  
>  	sg_free_table(&umem->sg_head);
> diff --git a/drivers/infiniband/hw/hfi1/user_pages.c b/drivers/infiniband/hw/hfi1/user_pages.c
> index b89a9b9aef7a..469acb961fbd 100644
> --- a/drivers/infiniband/hw/hfi1/user_pages.c
> +++ b/drivers/infiniband/hw/hfi1/user_pages.c
> @@ -118,10 +118,7 @@ int hfi1_acquire_user_pages(struct mm_struct *mm, unsigned long vaddr, size_t np
>  void hfi1_release_user_pages(struct mm_struct *mm, struct page **p,
>  			     size_t npages, bool dirty)
>  {
> -	if (dirty)
> -		put_user_pages_dirty_lock(p, npages);
> -	else
> -		put_user_pages(p, npages);
> +	put_user_pages_dirty_lock(p, npages, dirty);
>  
>  	if (mm) { /* during close after signal, mm can be NULL */
>  		atomic64_sub(npages, &mm->pinned_vm);
> diff --git a/drivers/infiniband/hw/qib/qib_user_pages.c b/drivers/infiniband/hw/qib/qib_user_pages.c
> index bfbfbb7e0ff4..26c1fb8d45cc 100644
> --- a/drivers/infiniband/hw/qib/qib_user_pages.c
> +++ b/drivers/infiniband/hw/qib/qib_user_pages.c
> @@ -37,15 +37,6 @@
>  
>  #include "qib.h"
>  
> -static void __qib_release_user_pages(struct page **p, size_t num_pages,
> -				     int dirty)
> -{
> -	if (dirty)
> -		put_user_pages_dirty_lock(p, num_pages);
> -	else
> -		put_user_pages(p, num_pages);
> -}
> -
>  /**
>   * qib_map_page - a safety wrapper around pci_map_page()
>   *
> @@ -124,7 +115,7 @@ int qib_get_user_pages(unsigned long start_page, size_t num_pages,
>  
>  	return 0;
>  bail_release:
> -	__qib_release_user_pages(p, got, 0);
> +	put_user_pages_dirty_lock(p, got, false);
>  bail:
>  	atomic64_sub(num_pages, &current->mm->pinned_vm);
>  	return ret;
> @@ -132,7 +123,7 @@ int qib_get_user_pages(unsigned long start_page, size_t num_pages,
>  
>  void qib_release_user_pages(struct page **p, size_t num_pages)
>  {
> -	__qib_release_user_pages(p, num_pages, 1);
> +	put_user_pages_dirty_lock(p, num_pages, true);
>  
>  	/* during close after signal, mm can be NULL */
>  	if (current->mm)
> diff --git a/drivers/infiniband/hw/usnic/usnic_uiom.c b/drivers/infiniband/hw/usnic/usnic_uiom.c
> index 0b0237d41613..62e6ffa9ad78 100644
> --- a/drivers/infiniband/hw/usnic/usnic_uiom.c
> +++ b/drivers/infiniband/hw/usnic/usnic_uiom.c
> @@ -75,10 +75,7 @@ static void usnic_uiom_put_pages(struct list_head *chunk_list, int dirty)
>  		for_each_sg(chunk->page_list, sg, chunk->nents, i) {
>  			page = sg_page(sg);
>  			pa = sg_phys(sg);
> -			if (dirty)
> -				put_user_pages_dirty_lock(&page, 1);
> -			else
> -				put_user_page(page);
> +			put_user_pages_dirty_lock(&page, 1, dirty);
>  			usnic_dbg("pa: %pa\n", &pa);
>  		}
>  		kfree(chunk);
> diff --git a/drivers/infiniband/sw/siw/siw_mem.c b/drivers/infiniband/sw/siw/siw_mem.c
> index 67171c82b0c4..1e197753bf2f 100644
> --- a/drivers/infiniband/sw/siw/siw_mem.c
> +++ b/drivers/infiniband/sw/siw/siw_mem.c
> @@ -60,20 +60,6 @@ struct siw_mem *siw_mem_id2obj(struct siw_device *sdev, int stag_index)
>  	return NULL;
>  }
>  
> -static void siw_free_plist(struct siw_page_chunk *chunk, int num_pages,
> -			   bool dirty)
> -{
> -	struct page **p = chunk->plist;
> -
> -	while (num_pages--) {
> -		if (!PageDirty(*p) && dirty)
> -			put_user_pages_dirty_lock(p, 1);
> -		else
> -			put_user_page(*p);
> -		p++;
> -	}
> -}
> -
>  void siw_umem_release(struct siw_umem *umem, bool dirty)
>  {
>  	struct mm_struct *mm_s = umem->owning_mm;
> @@ -82,8 +68,9 @@ void siw_umem_release(struct siw_umem *umem, bool dirty)
>  	for (i = 0; num_pages; i++) {
>  		int to_free = min_t(int, PAGES_PER_CHUNK, num_pages);
>  
> -		siw_free_plist(&umem->page_chunk[i], to_free,
> -			       umem->writable && dirty);
> +		put_user_pages_dirty_lock(umem->page_chunk[i].plist,
> +					  to_free,
> +					  umem->writable && dirty);
>  		kfree(umem->page_chunk[i].plist);
>  		num_pages -= to_free;
>  	}
> diff --git a/include/linux/mm.h b/include/linux/mm.h
> index 0334ca97c584..9759b6a24420 100644
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -1057,8 +1057,9 @@ static inline void put_user_page(struct page *page)
>  	put_page(page);
>  }
>  
> -void put_user_pages_dirty(struct page **pages, unsigned long npages);
> -void put_user_pages_dirty_lock(struct page **pages, unsigned long npages);
> +void put_user_pages_dirty_lock(struct page **pages, unsigned long npages,
> +			       bool make_dirty);
> +
>  void put_user_pages(struct page **pages, unsigned long npages);
>  
>  #if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
> diff --git a/mm/gup.c b/mm/gup.c
> index 98f13ab37bac..7fefd7ab02c4 100644
> --- a/mm/gup.c
> +++ b/mm/gup.c
> @@ -29,85 +29,70 @@ struct follow_page_context {
>  	unsigned int page_mask;
>  };
>  
> -typedef int (*set_dirty_func_t)(struct page *page);
> -
> -static void __put_user_pages_dirty(struct page **pages,
> -				   unsigned long npages,
> -				   set_dirty_func_t sdf)
> -{
> -	unsigned long index;
> -
> -	for (index = 0; index < npages; index++) {
> -		struct page *page = compound_head(pages[index]);
> -
> -		/*
> -		 * Checking PageDirty at this point may race with
> -		 * clear_page_dirty_for_io(), but that's OK. Two key cases:
> -		 *
> -		 * 1) This code sees the page as already dirty, so it skips
> -		 * the call to sdf(). That could happen because
> -		 * clear_page_dirty_for_io() called page_mkclean(),
> -		 * followed by set_page_dirty(). However, now the page is
> -		 * going to get written back, which meets the original
> -		 * intention of setting it dirty, so all is well:
> -		 * clear_page_dirty_for_io() goes on to call
> -		 * TestClearPageDirty(), and write the page back.
> -		 *
> -		 * 2) This code sees the page as clean, so it calls sdf().
> -		 * The page stays dirty, despite being written back, so it
> -		 * gets written back again in the next writeback cycle.
> -		 * This is harmless.
> -		 */
> -		if (!PageDirty(page))
> -			sdf(page);
> -
> -		put_user_page(page);
> -	}
> -}
> -
>  /**
> - * put_user_pages_dirty() - release and dirty an array of gup-pinned pages
> - * @pages:  array of pages to be marked dirty and released.
> + * put_user_pages_dirty_lock() - release and optionally dirty gup-pinned pages
> + * @pages:  array of pages to be maybe marked dirty, and definitely released.

Better would be.

@pages:  array of pages to be put

>   * @npages: number of pages in the @pages array.
> + * @make_dirty: whether to mark the pages dirty
>   *
>   * "gup-pinned page" refers to a page that has had one of the get_user_pages()
>   * variants called on that page.
>   *
>   * For each page in the @pages array, make that page (or its head page, if a
> - * compound page) dirty, if it was previously listed as clean. Then, release
> - * the page using put_user_page().
> + * compound page) dirty, if @make_dirty is true, and if the page was previously
> + * listed as clean. In any case, releases all pages using put_user_page(),
> + * possibly via put_user_pages(), for the non-dirty case.

I don't think users of this interface need this level of detail.  I think
something like.

 * For each page in the @pages array, release the page.  If @make_dirty is
 * true, mark the page dirty prior to release.


>   *
>   * Please see the put_user_page() documentation for details.
>   *
> - * set_page_dirty(), which does not lock the page, is used here.
> - * Therefore, it is the caller's responsibility to ensure that this is
> - * safe. If not, then put_user_pages_dirty_lock() should be called instead.
> + * set_page_dirty_lock() is used internally. If instead, set_page_dirty() is
> + * required, then the caller should a) verify that this is really correct,
> + * because _lock() is usually required, and b) hand code it:
> + * set_page_dirty_lock(), put_user_page().
>   *
>   */
> -void put_user_pages_dirty(struct page **pages, unsigned long npages)
> +void put_user_pages_dirty_lock(struct page **pages, unsigned long npages,
> +			       bool make_dirty)
>  {
> -	__put_user_pages_dirty(pages, npages, set_page_dirty);
> -}
> -EXPORT_SYMBOL(put_user_pages_dirty);
> +	unsigned long index;
>  
> -/**
> - * put_user_pages_dirty_lock() - release and dirty an array of gup-pinned pages
> - * @pages:  array of pages to be marked dirty and released.
> - * @npages: number of pages in the @pages array.
> - *
> - * For each page in the @pages array, make that page (or its head page, if a
> - * compound page) dirty, if it was previously listed as clean. Then, release
> - * the page using put_user_page().
> - *
> - * Please see the put_user_page() documentation for details.
> - *
> - * This is just like put_user_pages_dirty(), except that it invokes
> - * set_page_dirty_lock(), instead of set_page_dirty().
> - *
> - */
> -void put_user_pages_dirty_lock(struct page **pages, unsigned long npages)
> -{
> -	__put_user_pages_dirty(pages, npages, set_page_dirty_lock);
> +	/*
> +	 * TODO: this can be optimized for huge pages: if a series of pages is
> +	 * physically contiguous and part of the same compound page, then a
> +	 * single operation to the head page should suffice.
> +	 */

I think this comment belongs to the for loop below...  or just something about
how to make this and put_user_pages() more efficient.  It is odd, that this is
the same comment as in put_user_pages()...

The code is good.  So... Other than the comments.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>

Ira

> +
> +	if (!make_dirty) {
> +		put_user_pages(pages, npages);
> +		return;
> +	}
> +
> +	for (index = 0; index < npages; index++) {
> +		struct page *page = compound_head(pages[index]);
> +		/*
> +		 * Checking PageDirty at this point may race with
> +		 * clear_page_dirty_for_io(), but that's OK. Two key
> +		 * cases:
> +		 *
> +		 * 1) This code sees the page as already dirty, so it
> +		 * skips the call to set_page_dirty(). That could happen
> +		 * because clear_page_dirty_for_io() called
> +		 * page_mkclean(), followed by set_page_dirty().
> +		 * However, now the page is going to get written back,
> +		 * which meets the original intention of setting it
> +		 * dirty, so all is well: clear_page_dirty_for_io() goes
> +		 * on to call TestClearPageDirty(), and write the page
> +		 * back.
> +		 *
> +		 * 2) This code sees the page as clean, so it calls
> +		 * set_page_dirty(). The page stays dirty, despite being
> +		 * written back, so it gets written back again in the
> +		 * next writeback cycle. This is harmless.
> +		 */
> +		if (!PageDirty(page))
> +			set_page_dirty_lock(page);
> +		put_user_page(page);
> +	}
>  }
>  EXPORT_SYMBOL(put_user_pages_dirty_lock);
>  
> -- 
> 2.22.0
>
John Hubbard Aug. 6, 2019, 8:39 p.m. UTC | #2
On 8/6/19 10:39 AM, Ira Weiny wrote:
> On Sun, Aug 04, 2019 at 03:48:42PM -0700, john.hubbard@gmail.com wrote:
>> From: John Hubbard <jhubbard@nvidia.com>
...
>> -
>>  /**
>> - * put_user_pages_dirty() - release and dirty an array of gup-pinned pages
>> - * @pages:  array of pages to be marked dirty and released.
>> + * put_user_pages_dirty_lock() - release and optionally dirty gup-pinned pages
>> + * @pages:  array of pages to be maybe marked dirty, and definitely released.
> 
> Better would be.
> 
> @pages:  array of pages to be put

OK, I'll change to that wording.

> 
>>   * @npages: number of pages in the @pages array.
>> + * @make_dirty: whether to mark the pages dirty
>>   *
>>   * "gup-pinned page" refers to a page that has had one of the get_user_pages()
>>   * variants called on that page.
>>   *
>>   * For each page in the @pages array, make that page (or its head page, if a
>> - * compound page) dirty, if it was previously listed as clean. Then, release
>> - * the page using put_user_page().
>> + * compound page) dirty, if @make_dirty is true, and if the page was previously
>> + * listed as clean. In any case, releases all pages using put_user_page(),
>> + * possibly via put_user_pages(), for the non-dirty case.
> 
> I don't think users of this interface need this level of detail.  I think
> something like.
> 
>  * For each page in the @pages array, release the page.  If @make_dirty is
>  * true, mark the page dirty prior to release.

Yes, it is too wordy, I'll change to that.

> 
...
>> -void put_user_pages_dirty_lock(struct page **pages, unsigned long npages)
>> -{
>> -	__put_user_pages_dirty(pages, npages, set_page_dirty_lock);
>> +	/*
>> +	 * TODO: this can be optimized for huge pages: if a series of pages is
>> +	 * physically contiguous and part of the same compound page, then a
>> +	 * single operation to the head page should suffice.
>> +	 */
> 
> I think this comment belongs to the for loop below...  or just something about
> how to make this and put_user_pages() more efficient.  It is odd, that this is
> the same comment as in put_user_pages()...

Actually I think I'll just delete the comment entirely, it's just noise really.

> 
> The code is good.  So... Other than the comments.
> 
> Reviewed-by: Ira Weiny <ira.weiny@intel.com>


Thanks for the review!


thanks,
diff mbox series

Patch

diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index 08da840ed7ee..965cf9dea71a 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -54,10 +54,7 @@  static void __ib_umem_release(struct ib_device *dev, struct ib_umem *umem, int d
 
 	for_each_sg_page(umem->sg_head.sgl, &sg_iter, umem->sg_nents, 0) {
 		page = sg_page_iter_page(&sg_iter);
-		if (umem->writable && dirty)
-			put_user_pages_dirty_lock(&page, 1);
-		else
-			put_user_page(page);
+		put_user_pages_dirty_lock(&page, 1, umem->writable && dirty);
 	}
 
 	sg_free_table(&umem->sg_head);
diff --git a/drivers/infiniband/hw/hfi1/user_pages.c b/drivers/infiniband/hw/hfi1/user_pages.c
index b89a9b9aef7a..469acb961fbd 100644
--- a/drivers/infiniband/hw/hfi1/user_pages.c
+++ b/drivers/infiniband/hw/hfi1/user_pages.c
@@ -118,10 +118,7 @@  int hfi1_acquire_user_pages(struct mm_struct *mm, unsigned long vaddr, size_t np
 void hfi1_release_user_pages(struct mm_struct *mm, struct page **p,
 			     size_t npages, bool dirty)
 {
-	if (dirty)
-		put_user_pages_dirty_lock(p, npages);
-	else
-		put_user_pages(p, npages);
+	put_user_pages_dirty_lock(p, npages, dirty);
 
 	if (mm) { /* during close after signal, mm can be NULL */
 		atomic64_sub(npages, &mm->pinned_vm);
diff --git a/drivers/infiniband/hw/qib/qib_user_pages.c b/drivers/infiniband/hw/qib/qib_user_pages.c
index bfbfbb7e0ff4..26c1fb8d45cc 100644
--- a/drivers/infiniband/hw/qib/qib_user_pages.c
+++ b/drivers/infiniband/hw/qib/qib_user_pages.c
@@ -37,15 +37,6 @@ 
 
 #include "qib.h"
 
-static void __qib_release_user_pages(struct page **p, size_t num_pages,
-				     int dirty)
-{
-	if (dirty)
-		put_user_pages_dirty_lock(p, num_pages);
-	else
-		put_user_pages(p, num_pages);
-}
-
 /**
  * qib_map_page - a safety wrapper around pci_map_page()
  *
@@ -124,7 +115,7 @@  int qib_get_user_pages(unsigned long start_page, size_t num_pages,
 
 	return 0;
 bail_release:
-	__qib_release_user_pages(p, got, 0);
+	put_user_pages_dirty_lock(p, got, false);
 bail:
 	atomic64_sub(num_pages, &current->mm->pinned_vm);
 	return ret;
@@ -132,7 +123,7 @@  int qib_get_user_pages(unsigned long start_page, size_t num_pages,
 
 void qib_release_user_pages(struct page **p, size_t num_pages)
 {
-	__qib_release_user_pages(p, num_pages, 1);
+	put_user_pages_dirty_lock(p, num_pages, true);
 
 	/* during close after signal, mm can be NULL */
 	if (current->mm)
diff --git a/drivers/infiniband/hw/usnic/usnic_uiom.c b/drivers/infiniband/hw/usnic/usnic_uiom.c
index 0b0237d41613..62e6ffa9ad78 100644
--- a/drivers/infiniband/hw/usnic/usnic_uiom.c
+++ b/drivers/infiniband/hw/usnic/usnic_uiom.c
@@ -75,10 +75,7 @@  static void usnic_uiom_put_pages(struct list_head *chunk_list, int dirty)
 		for_each_sg(chunk->page_list, sg, chunk->nents, i) {
 			page = sg_page(sg);
 			pa = sg_phys(sg);
-			if (dirty)
-				put_user_pages_dirty_lock(&page, 1);
-			else
-				put_user_page(page);
+			put_user_pages_dirty_lock(&page, 1, dirty);
 			usnic_dbg("pa: %pa\n", &pa);
 		}
 		kfree(chunk);
diff --git a/drivers/infiniband/sw/siw/siw_mem.c b/drivers/infiniband/sw/siw/siw_mem.c
index 67171c82b0c4..1e197753bf2f 100644
--- a/drivers/infiniband/sw/siw/siw_mem.c
+++ b/drivers/infiniband/sw/siw/siw_mem.c
@@ -60,20 +60,6 @@  struct siw_mem *siw_mem_id2obj(struct siw_device *sdev, int stag_index)
 	return NULL;
 }
 
-static void siw_free_plist(struct siw_page_chunk *chunk, int num_pages,
-			   bool dirty)
-{
-	struct page **p = chunk->plist;
-
-	while (num_pages--) {
-		if (!PageDirty(*p) && dirty)
-			put_user_pages_dirty_lock(p, 1);
-		else
-			put_user_page(*p);
-		p++;
-	}
-}
-
 void siw_umem_release(struct siw_umem *umem, bool dirty)
 {
 	struct mm_struct *mm_s = umem->owning_mm;
@@ -82,8 +68,9 @@  void siw_umem_release(struct siw_umem *umem, bool dirty)
 	for (i = 0; num_pages; i++) {
 		int to_free = min_t(int, PAGES_PER_CHUNK, num_pages);
 
-		siw_free_plist(&umem->page_chunk[i], to_free,
-			       umem->writable && dirty);
+		put_user_pages_dirty_lock(umem->page_chunk[i].plist,
+					  to_free,
+					  umem->writable && dirty);
 		kfree(umem->page_chunk[i].plist);
 		num_pages -= to_free;
 	}
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 0334ca97c584..9759b6a24420 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1057,8 +1057,9 @@  static inline void put_user_page(struct page *page)
 	put_page(page);
 }
 
-void put_user_pages_dirty(struct page **pages, unsigned long npages);
-void put_user_pages_dirty_lock(struct page **pages, unsigned long npages);
+void put_user_pages_dirty_lock(struct page **pages, unsigned long npages,
+			       bool make_dirty);
+
 void put_user_pages(struct page **pages, unsigned long npages);
 
 #if defined(CONFIG_SPARSEMEM) && !defined(CONFIG_SPARSEMEM_VMEMMAP)
diff --git a/mm/gup.c b/mm/gup.c
index 98f13ab37bac..7fefd7ab02c4 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -29,85 +29,70 @@  struct follow_page_context {
 	unsigned int page_mask;
 };
 
-typedef int (*set_dirty_func_t)(struct page *page);
-
-static void __put_user_pages_dirty(struct page **pages,
-				   unsigned long npages,
-				   set_dirty_func_t sdf)
-{
-	unsigned long index;
-
-	for (index = 0; index < npages; index++) {
-		struct page *page = compound_head(pages[index]);
-
-		/*
-		 * Checking PageDirty at this point may race with
-		 * clear_page_dirty_for_io(), but that's OK. Two key cases:
-		 *
-		 * 1) This code sees the page as already dirty, so it skips
-		 * the call to sdf(). That could happen because
-		 * clear_page_dirty_for_io() called page_mkclean(),
-		 * followed by set_page_dirty(). However, now the page is
-		 * going to get written back, which meets the original
-		 * intention of setting it dirty, so all is well:
-		 * clear_page_dirty_for_io() goes on to call
-		 * TestClearPageDirty(), and write the page back.
-		 *
-		 * 2) This code sees the page as clean, so it calls sdf().
-		 * The page stays dirty, despite being written back, so it
-		 * gets written back again in the next writeback cycle.
-		 * This is harmless.
-		 */
-		if (!PageDirty(page))
-			sdf(page);
-
-		put_user_page(page);
-	}
-}
-
 /**
- * put_user_pages_dirty() - release and dirty an array of gup-pinned pages
- * @pages:  array of pages to be marked dirty and released.
+ * put_user_pages_dirty_lock() - release and optionally dirty gup-pinned pages
+ * @pages:  array of pages to be maybe marked dirty, and definitely released.
  * @npages: number of pages in the @pages array.
+ * @make_dirty: whether to mark the pages dirty
  *
  * "gup-pinned page" refers to a page that has had one of the get_user_pages()
  * variants called on that page.
  *
  * For each page in the @pages array, make that page (or its head page, if a
- * compound page) dirty, if it was previously listed as clean. Then, release
- * the page using put_user_page().
+ * compound page) dirty, if @make_dirty is true, and if the page was previously
+ * listed as clean. In any case, releases all pages using put_user_page(),
+ * possibly via put_user_pages(), for the non-dirty case.
  *
  * Please see the put_user_page() documentation for details.
  *
- * set_page_dirty(), which does not lock the page, is used here.
- * Therefore, it is the caller's responsibility to ensure that this is
- * safe. If not, then put_user_pages_dirty_lock() should be called instead.
+ * set_page_dirty_lock() is used internally. If instead, set_page_dirty() is
+ * required, then the caller should a) verify that this is really correct,
+ * because _lock() is usually required, and b) hand code it:
+ * set_page_dirty_lock(), put_user_page().
  *
  */
-void put_user_pages_dirty(struct page **pages, unsigned long npages)
+void put_user_pages_dirty_lock(struct page **pages, unsigned long npages,
+			       bool make_dirty)
 {
-	__put_user_pages_dirty(pages, npages, set_page_dirty);
-}
-EXPORT_SYMBOL(put_user_pages_dirty);
+	unsigned long index;
 
-/**
- * put_user_pages_dirty_lock() - release and dirty an array of gup-pinned pages
- * @pages:  array of pages to be marked dirty and released.
- * @npages: number of pages in the @pages array.
- *
- * For each page in the @pages array, make that page (or its head page, if a
- * compound page) dirty, if it was previously listed as clean. Then, release
- * the page using put_user_page().
- *
- * Please see the put_user_page() documentation for details.
- *
- * This is just like put_user_pages_dirty(), except that it invokes
- * set_page_dirty_lock(), instead of set_page_dirty().
- *
- */
-void put_user_pages_dirty_lock(struct page **pages, unsigned long npages)
-{
-	__put_user_pages_dirty(pages, npages, set_page_dirty_lock);
+	/*
+	 * TODO: this can be optimized for huge pages: if a series of pages is
+	 * physically contiguous and part of the same compound page, then a
+	 * single operation to the head page should suffice.
+	 */
+
+	if (!make_dirty) {
+		put_user_pages(pages, npages);
+		return;
+	}
+
+	for (index = 0; index < npages; index++) {
+		struct page *page = compound_head(pages[index]);
+		/*
+		 * Checking PageDirty at this point may race with
+		 * clear_page_dirty_for_io(), but that's OK. Two key
+		 * cases:
+		 *
+		 * 1) This code sees the page as already dirty, so it
+		 * skips the call to set_page_dirty(). That could happen
+		 * because clear_page_dirty_for_io() called
+		 * page_mkclean(), followed by set_page_dirty().
+		 * However, now the page is going to get written back,
+		 * which meets the original intention of setting it
+		 * dirty, so all is well: clear_page_dirty_for_io() goes
+		 * on to call TestClearPageDirty(), and write the page
+		 * back.
+		 *
+		 * 2) This code sees the page as clean, so it calls
+		 * set_page_dirty(). The page stays dirty, despite being
+		 * written back, so it gets written back again in the
+		 * next writeback cycle. This is harmless.
+		 */
+		if (!PageDirty(page))
+			set_page_dirty_lock(page);
+		put_user_page(page);
+	}
 }
 EXPORT_SYMBOL(put_user_pages_dirty_lock);