From patchwork Wed Apr 17 09:46:09 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905093 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id ACC2717E6 for ; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 985CB288D0 for ; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 8CEBC288D2; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1A4BF2892E for ; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731664AbfDQJqh (ORCPT ); Wed, 17 Apr 2019 05:46:37 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44534 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731645AbfDQJqg (ORCPT ); Wed, 17 Apr 2019 05:46:36 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=Q1pNcpslvmb56dzJY2LQ9VFTGyQXrn+n93Lv3V4JY2c=; b=oPnLT253S6biASai9M/vZlBPYS 93eiTuJ9TdiqJqvh9nZ+05jNnzKT6D26a+QoPgvCXuVtqdnjXMHOtd0zD/GSdOjAHJpdgakji2yog gSGd9U/5BZ9lO4V/mPqqIllEGdHBSOr0jUl6qtATLnpoK0qnHVlN08vVlPcUClkFPbwbYlVHTtTud dzwZsgq3kBNOa2n3eAJ+uxcANQyULA9I9y0G96c7tDYvQUpR+e/mg2OvODWk5swRfLzbJEWDjSNNu zx7y0A/wdBCN4qjIrcyo/8Ekz1S6tAMT3OOsfozgcZCzvEl5rY1rXiPH24+Iq8UUoXJtIzC8UkRxy pp5LkGqw==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000a3-Jk; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003u8-PW; Wed, 17 Apr 2019 06:46:30 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 01/21] docs: hwmon: k10temp: convert to ReST format Date: Wed, 17 Apr 2019 06:46:09 -0300 Message-Id: <9ed57114de6b0a1ed13a8b219ccb579ca2662320.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert k10temp to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/k10temp | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp index 254d2f55345a..12a86ba17de9 100644 --- a/Documentation/hwmon/k10temp +++ b/Documentation/hwmon/k10temp @@ -2,42 +2,77 @@ Kernel driver k10temp ===================== Supported chips: + * AMD Family 10h processors: + Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below) + Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below) + Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II + Socket S1G3: Athlon II, Sempron, Turion II + * AMD Family 11h processors: + Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) + * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series) + * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) + * AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo" + * AMD Family 16h processors: "Kabini", "Mullins" Prefix: 'k10temp' + Addresses scanned: PCI space + Datasheets: + BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/31116.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41256.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors: + http://support.amd.com/us/Processor_TechDocs/41131.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors: + http://support.amd.com/us/Processor_TechDocs/43170.pdf + Revision Guide for AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/41322.pdf + Revision Guide for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41788.pdf + Revision Guide for AMD Family 12h Processors: + http://support.amd.com/us/Processor_TechDocs/44739.pdf + Revision Guide for AMD Family 14h Models 00h-0Fh Processors: + http://support.amd.com/us/Processor_TechDocs/47534.pdf + AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks: + http://support.amd.com/us/Processor_TechDocs/43373.pdf + AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43374.pdf + AMD Family 10h Desktop Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43375.pdf Author: Clemens Ladisch @@ -60,7 +95,7 @@ are using an AM3 processor on an AM2+ mainboard, you can safely use the There is one temperature measurement value, available as temp1_input in sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree. -Please note that it is defined as a relative value; to quote the AMD manual: +Please note that it is defined as a relative value; to quote the AMD manual:: Tctl is the processor temperature control value, used by the platform to control cooling systems. Tctl is a non-physical temperature on an From patchwork Wed Apr 17 09:46:10 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905087 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id DBEB817E0 for ; Wed, 17 Apr 2019 09:48:35 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id C62DA288D0 for ; Wed, 17 Apr 2019 09:48:35 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id B836328980; Wed, 17 Apr 2019 09:48:35 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 66C81288D0 for ; Wed, 17 Apr 2019 09:48:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731753AbfDQJs2 (ORCPT ); Wed, 17 Apr 2019 05:48:28 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44756 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731683AbfDQJqi (ORCPT ); Wed, 17 Apr 2019 05:46:38 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=usEtvPDaSFf99phOElHFCTpsFSNcxENwWCf3il6USvw=; b=Yhizq8TjeMfZLpXY7t8h8kMnBu 8BlPo9RpRElzDuAnebIPnK0Ho0/zpXfOJ9EVywxAJ2YwhKBb8GxO6PVdmxsTv/78vDPo56gJgn1WA dJai3e1j+Ste9c9TtI6ZWi3dOS8tEde9cKziX3G29I087DWk1a3danYV/RXEEqM8mAK0IEdspw8Bp x4QXgtNhe2k9A/9vdGVAnt+PGGXr7GWhnYm9z6OPHuU5Zq5A0TQsXmpY5iUBnnMCvDU2wzIcpJnCl U1RTBOxk2VUzsF/jNPy/lAesFVExGocqa74DfXk78lgilAp/I7TfRw/z0DA30Q5g4WHDjOPbeZM2s B5jWEzqQ==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000aA-JZ; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003uC-QN; Wed, 17 Apr 2019 06:46:30 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , Liviu Dudau , Sudeep Holla , Lorenzo Pieralisi , linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 02/21] docs: hwmon: vexpress: convert to ReST format Date: Wed, 17 Apr 2019 06:46:10 -0300 Message-Id: <7f3e72d30c341b48d344110925a4f5fb3c92fe3c.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert vexpress to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Acked-by: Liviu Dudau --- Documentation/hwmon/vexpress | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/Documentation/hwmon/vexpress b/Documentation/hwmon/vexpress index 557d6d5ad90d..8c861c8151ac 100644 --- a/Documentation/hwmon/vexpress +++ b/Documentation/hwmon/vexpress @@ -2,14 +2,21 @@ Kernel driver vexpress ====================== Supported systems: + * ARM Ltd. Versatile Express platform + Prefix: 'vexpress' + Datasheets: + * "Hardware Description" sections of the Technical Reference Manuals - for the Versatile Express boards: - http://infocenter.arm.com/help/topic/com.arm.doc.subset.boards.express/index.html + for the Versatile Express boards: + + - http://infocenter.arm.com/help/topic/com.arm.doc.subset.boards.express/index.html + * Section "4.4.14. System Configuration registers" of the V2M-P1 TRM: - http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0447-/index.html + + - http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0447-/index.html Author: Pawel Moll From patchwork Wed Apr 17 09:46:11 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905101 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B89FC17E6 for ; Wed, 17 Apr 2019 09:48:59 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id A3576288D0 for ; Wed, 17 Apr 2019 09:48:59 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 968402892E; Wed, 17 Apr 2019 09:48:59 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 09C91288D2 for ; Wed, 17 Apr 2019 09:48:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731647AbfDQJsr (ORCPT ); Wed, 17 Apr 2019 05:48:47 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44518 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731639AbfDQJqg (ORCPT ); Wed, 17 Apr 2019 05:46:36 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=YulanG3i2WrJpx0xcGHlq1inbqZIAFZQdFGyn1cb8Dg=; b=QWM2Vrn0rj0r4DHh58VbLoFul+ 8cc0qm9YCEaWmY91K1kwhmCPKPztfuVhjNtU7X55SyaoQXUmDrLhVomyTOTNKm0u/cSzhAC+fFjxX b3OG52eo13K6ScO8hWmBnsFAQi59xl9BGlsXjaCY9JR/XXTmcZeP3iyKPwxPDVS5FqbRIchoyt0nk lbkxnPX/fBZD81PkVfBvea9+mEW7RUMz+XRrRdpgJ61Etu979r8dltSQQ5xywc2a6MiTDmet83BHU K9sOFgWRMdA+XBcLaVc8K4mo+VU4aWhan/jnRv04ZZBAKA3twoiJzSwfImCsGJkXRLGvkkJk2PAli ctKhcupg==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000a4-JT; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003uG-RG; Wed, 17 Apr 2019 06:46:30 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 03/21] docs: hwmon: menf21bmc: convert to ReST format Date: Wed, 17 Apr 2019 06:46:11 -0300 Message-Id: <8d7f058a9a75ec8ab19013b56e526e340020f8fc.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert menf21bmc to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/menf21bmc | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/hwmon/menf21bmc b/Documentation/hwmon/menf21bmc index 2a273a065c5e..1f0c6b2235ab 100644 --- a/Documentation/hwmon/menf21bmc +++ b/Documentation/hwmon/menf21bmc @@ -2,8 +2,11 @@ Kernel driver menf21bmc_hwmon ============================= Supported chips: + * MEN 14F021P00 + Prefix: 'menf21bmc_hwmon' + Adresses scanned: - Author: Andreas Werner @@ -34,6 +37,7 @@ Sysfs entries The following attributes are supported. All attributes are read only The Limits are read once by the driver. +=============== ========================== in0_input +3.3V input voltage in1_input +5.0V input voltage in2_input +12.0V input voltage @@ -48,3 +52,4 @@ in1_label "MON_5V" in2_label "MON_12V" in3_label "5V_STANDBY" in4_label "VBAT" +=============== ========================== From patchwork Wed Apr 17 09:46:12 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905095 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1437C13B5 for ; Wed, 17 Apr 2019 09:48:38 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id F3306288D0 for ; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id E7CC1288D2; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 9C85228980 for ; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731659AbfDQJqh (ORCPT ); Wed, 17 Apr 2019 05:46:37 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44488 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731633AbfDQJqg (ORCPT ); Wed, 17 Apr 2019 05:46:36 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=xCuR65PtwgJBAPxgpGGXq1ybGkxNyklHVSry7KBSYD4=; b=R5Ffh4/pikYIASKx80VMTLv9F7 WSBnPADcZllhXk5C6NFIUjAvFZMjIJR+3lvWcOIvGpnM8waYcp/s1RnpuNY8n4vLEdpx32n1bqydA 8r5sRndbFT/CJbYMy5f+urdoh4TpYo7XEOLk+NXh5nvhowuHDCWjVVhUIdWz469vQ7PH+eB/sW7j8 n6ZdFlM6KGjW39ef+nl7/d/U3Njz5l+2NAcwpZpC05nTxgyb1lpeLCY3ZbOP/PSpm1jeNpf5JKleq qa07n0DhcFFwMh6BQjux6bnfjL/36In4j6fAt1sSi4DuLkj1YM92ysY/mc8AKOk3B/T3liow2Qo03 71MgdDXg==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000a6-JK; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003uK-S5; Wed, 17 Apr 2019 06:46:30 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 04/21] docs: hwmon: sch5627: convert to ReST format Date: Wed, 17 Apr 2019 06:46:12 -0300 Message-Id: <849c7881be62a68274f57d9cc58ee93194f695cb.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert sch5627 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/sch5627 | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627 index 0551d266c51c..187682e99114 100644 --- a/Documentation/hwmon/sch5627 +++ b/Documentation/hwmon/sch5627 @@ -2,9 +2,13 @@ Kernel driver sch5627 ===================== Supported chips: + * SMSC SCH5627 + Prefix: 'sch5627' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Application Note available upon request Author: Hans de Goede From patchwork Wed Apr 17 09:46:13 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905097 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 268F913B5 for ; Wed, 17 Apr 2019 09:48:39 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1318F288D0 for ; Wed, 17 Apr 2019 09:48:39 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 07AB428980; Wed, 17 Apr 2019 09:48:39 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id AD641288D0 for ; Wed, 17 Apr 2019 09:48:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731743AbfDQJsi (ORCPT ); Wed, 17 Apr 2019 05:48:38 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44516 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731644AbfDQJqh (ORCPT ); Wed, 17 Apr 2019 05:46:37 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=et9eXCe5ZAfSQ5mBgtr6YkPzKHB/bcQ3N5gbJc1LICw=; b=M9loXKwhDUJ/5g04e+LM81GOD9 YYxJW+x6ca9seyVxSqxCgC8BSpvs+QbKVfWL+x62WyiDk15zxbAs2W/doSzXbQd7N1syeMQ4mLYbh 8f5q4vJMStHM9zLz/75Gk6ZXY+Vd/VuIicVeVYlUw8WJwyp4rJjqru8TBmcKiD25TVhfb2hlRP5ZD XhbzQTgqFstXKfSmt4WIfotdleKQ6EpIHW6OT8ykdV315u5dwriIcripKsl7KRwkTkRlbp8pPu+EB OQr7LsF0vNGzJrsY9NtovVf4aZvDsprsw8IF2dd21ocUmT3WGuoIlCkGoyUabf4wi9U/egU0CZ2CY O3Rx2Qcg==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000a5-JA; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003uO-St; Wed, 17 Apr 2019 06:46:30 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 05/21] docs: hwmon: emc2103: convert to ReST format Date: Wed, 17 Apr 2019 06:46:13 -0300 Message-Id: X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert emc2103 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/emc2103 | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103 index a12b2c127140..6a6ca6d1b34e 100644 --- a/Documentation/hwmon/emc2103 +++ b/Documentation/hwmon/emc2103 @@ -2,13 +2,17 @@ Kernel driver emc2103 ====================== Supported chips: + * SMSC EMC2103 + Addresses scanned: I2C 0x2e + Prefix: 'emc2103' + Datasheet: Not public Authors: - Steve Glendinning + Steve Glendinning Description ----------- From patchwork Wed Apr 17 09:46:14 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905099 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 7807D17E6 for ; Wed, 17 Apr 2019 09:48:39 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 616E3288D0 for ; Wed, 17 Apr 2019 09:48:39 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 5607E2892E; Wed, 17 Apr 2019 09:48:39 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D7D94288D2 for ; Wed, 17 Apr 2019 09:48:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731771AbfDQJsi (ORCPT ); Wed, 17 Apr 2019 05:48:38 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44556 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731647AbfDQJqg (ORCPT ); Wed, 17 Apr 2019 05:46:36 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=6Qp3OTiveUtdQiehEFVG/K5c8ofOuDom/ezWCNRJrzE=; b=FKlTM234SxlApmsHdiTYUxL55U lzl7V6iD6kAoj0ZzXzAuNIpH8IUMvWrLcBAZpr+CBZ+4XnL0pfmmiYxBVMAQuIqqsfMboCdPqjTAN YD4/6d+grCLfkLomapTpdog6D/cF41mJdYql0OyEX+OCxacgBjbYHMdjPOqnEF1V5pyT42lLmBAwS ASxbIznLvyCRq/EUTgrf0uBYT34mnmsdeLrmcv0IR7iMgYIEYWyNA+cAYF8kl1UgAvMmrlga0lVWW rEYbnTk4qTC4B43AAUCD9mkcYsl2wa/u3WoMiwzJhXQNfIMqg2FLXgRyiM1Hn0j0ofsHtLioUp5JX 3aMPrjjw==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000a8-KF; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003uS-Tj; Wed, 17 Apr 2019 06:46:30 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 06/21] docs: hwmon: pc87360: convert to ReST format Date: Wed, 17 Apr 2019 06:46:14 -0300 Message-Id: X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert pc87360 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/pc87360 | 38 +++++++++++++++++++++++++------------ 1 file changed, 26 insertions(+), 12 deletions(-) diff --git a/Documentation/hwmon/pc87360 b/Documentation/hwmon/pc87360 index d5f5cf16ce59..4bad07bce54b 100644 --- a/Documentation/hwmon/pc87360 +++ b/Documentation/hwmon/pc87360 @@ -2,14 +2,19 @@ Kernel driver pc87360 ===================== Supported chips: + * National Semiconductor PC87360, PC87363, PC87364, PC87365 and PC87366 + Prefixes: 'pc87360', 'pc87363', 'pc87364', 'pc87365', 'pc87366' + Addresses scanned: none, address read from Super I/O config space + Datasheets: No longer available Authors: Jean Delvare Thanks to Sandeep Mehta, Tonko de Rooy and Daniel Ceregatti for testing. + Thanks to Rudolf Marek for helping me investigate conversion issues. @@ -17,11 +22,13 @@ Module Parameters ----------------- * init int - Chip initialization level: - 0: None - *1: Forcibly enable internal voltage and temperature channels, except in9 - 2: Forcibly enable all voltage and temperature channels, except in9 - 3: Forcibly enable all voltage and temperature channels, including in9 + Chip initialization level: + + - 0: None + - **1**: Forcibly enable internal voltage and temperature channels, + except in9 + - 2: Forcibly enable all voltage and temperature channels, except in9 + - 3: Forcibly enable all voltage and temperature channels, including in9 Note that this parameter has no effect for the PC87360, PC87363 and PC87364 chips. @@ -43,13 +50,15 @@ hardware monitoring chipsets, not only controlling and monitoring three fans, but also monitoring eleven voltage inputs and two (PC87365) or up to four (PC87366) temperatures. + =========== ======= ======= ======= ======= ===== Chip #vin #fan #pwm #temp devid - + =========== ======= ======= ======= ======= ===== PC87360 - 2 2 - 0xE1 PC87363 - 2 2 - 0xE8 PC87364 - 3 3 - 0xE4 PC87365 11 3 3 2 0xE5 PC87366 11 3 3 3-4 0xE9 + =========== ======= ======= ======= ======= ===== The driver assumes that no more than one chip is present, and one of the standard Super I/O addresses is used (0x2E/0x2F or 0x4E/0x4F) @@ -68,18 +77,23 @@ have to care no more. For reference, here are a few values about clock dividers: - slowest accuracy highest - measurable around 3000 accurate + =========== =============== =============== =========== + slowest accuracy highest + measurable around 3000 accurate divider speed (RPM) RPM (RPM) speed (RPM) - 1 1882 18 6928 - 2 941 37 4898 - 4 470 74 3464 - 8 235 150 2449 + =========== =============== =============== =========== + 1 1882 18 6928 + 2 941 37 4898 + 4 470 74 3464 + 8 235 150 2449 + =========== =============== =============== =========== For the curious, here is how the values above were computed: + * slowest measurable speed: clock/(255*divider) * accuracy around 3000 RPM: 3000^2/clock * highest accurate speed: sqrt(clock*100) + The clock speed for the PC87360 family is 480 kHz. I arbitrarily chose 100 RPM as the lowest acceptable accuracy. From patchwork Wed Apr 17 09:46:15 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905057 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0E61C17E0 for ; Wed, 17 Apr 2019 09:46:38 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id ED484288D0 for ; Wed, 17 Apr 2019 09:46:37 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id E13FF2892E; Wed, 17 Apr 2019 09:46:37 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5D1F7288D0 for ; Wed, 17 Apr 2019 09:46:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731651AbfDQJqh (ORCPT ); Wed, 17 Apr 2019 05:46:37 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44468 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727013AbfDQJqg (ORCPT ); Wed, 17 Apr 2019 05:46:36 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=M6d3gsVlVPLCn/N3u8ByL4YNqFMBx3u0kXh2q28dX1Q=; b=sxSTFQrj+PkkcjQ7c6Z4DPRiCy OKj+yThGIOeNlwWyizWCXpXho3olY1zX2lJUqzWMb5BD78bwrPBy6ayXZYmypRpnH6pbXS8o3p/Xx 8J1b08KsczB9VV9a0p3ewhbumDwYbB7ILZPLNMobyF4UA6M/AhpGqsrSXtkPJKlXi/mCiWgY0gJWr FKVR0ZkiyJCOd43QF95XHWZIfGTJAjDsx+IOGX+yxUeefafj/G5EVkY3MeQIJ5tNS/+Y9tFaqXEtH 5AmjeallMSaFoIaZ9XdKBEeLJ5l2JPcTYLPkFro5OJz8JMTY1F4MJ8ybuABLKVizoeZBkxWe8Ak27 rfVkaAMw==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000a7-HX; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003uW-UZ; Wed, 17 Apr 2019 06:46:30 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 07/21] docs: hwmon: fam15h_power: convert to ReST format Date: Wed, 17 Apr 2019 06:46:15 -0300 Message-Id: <602e740d6286ae6b0909f75383a45136c91975a6.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert fam15h_power to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/fam15h_power | 85 +++++++++++++++++++++----------- 1 file changed, 57 insertions(+), 28 deletions(-) diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power index fb594c281c46..fdde632c93a3 100644 --- a/Documentation/hwmon/fam15h_power +++ b/Documentation/hwmon/fam15h_power @@ -2,15 +2,20 @@ Kernel driver fam15h_power ========================== Supported chips: + * AMD Family 15h Processors + * AMD Family 16h Processors Prefix: 'fam15h_power' + Addresses scanned: PCI space + Datasheets: - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors - AMD64 Architecture Programmer's Manual Volume 2: System Programming + + - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors + - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors + - AMD64 Architecture Programmer's Manual Volume 2: System Programming Author: Andreas Herrmann @@ -31,14 +36,19 @@ For AMD Family 15h and 16h processors the following power values can be calculated using different processor northbridge function registers: -* BasePwrWatts: Specifies in watts the maximum amount of power - consumed by the processor for NB and logic external to the core. -* ProcessorPwrWatts: Specifies in watts the maximum amount of power - the processor can support. -* CurrPwrWatts: Specifies in watts the current amount of power being - consumed by the processor. +* BasePwrWatts: + Specifies in watts the maximum amount of power + consumed by the processor for NB and logic external to the core. + +* ProcessorPwrWatts: + Specifies in watts the maximum amount of power + the processor can support. +* CurrPwrWatts: + Specifies in watts the current amount of power being + consumed by the processor. This driver provides ProcessorPwrWatts and CurrPwrWatts: + * power1_crit (ProcessorPwrWatts) * power1_input (CurrPwrWatts) @@ -53,35 +63,53 @@ calculate the average power consumed by a processor during a measurement interval Tm. The feature of accumulated power mechanism is indicated by CPUID Fn8000_0007_EDX[12]. -* Tsample: compute unit power accumulator sample period -* Tref: the PTSC counter period -* PTSC: performance timestamp counter -* N: the ratio of compute unit power accumulator sample period to the - PTSC period -* Jmax: max compute unit accumulated power which is indicated by - MaxCpuSwPwrAcc MSR C001007b -* Jx/Jy: compute unit accumulated power which is indicated by - CpuSwPwrAcc MSR C001007a -* Tx/Ty: the value of performance timestamp counter which is indicated - by CU_PTSC MSR C0010280 -* PwrCPUave: CPU average power +* Tsample: + compute unit power accumulator sample period + +* Tref: + the PTSC counter period + +* PTSC: + performance timestamp counter + +* N: + the ratio of compute unit power accumulator sample period to the + PTSC period + +* Jmax: + max compute unit accumulated power which is indicated by + MaxCpuSwPwrAcc MSR C001007b + +* Jx/Jy: + compute unit accumulated power which is indicated by + CpuSwPwrAcc MSR C001007a +* Tx/Ty: + the value of performance timestamp counter which is indicated + by CU_PTSC MSR C0010280 + +* PwrCPUave: + CPU average power i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007. + N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]]. ii. Read the full range of the cumulative energy value from the new -MSR MaxCpuSwPwrAcc. + MSR MaxCpuSwPwrAcc. + Jmax = value returned. + iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC. - Jx = value read from CpuSwPwrAcc and Tx = value read from -PTSC. + + Jx = value read from CpuSwPwrAcc and Tx = value read from PTSC. iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC. - Jy = value read from CpuSwPwrAcc and Ty = value read from -PTSC. + + Jy = value read from CpuSwPwrAcc and Ty = value read from PTSC. v. Calculate the average power consumption for a compute unit over -time period (y-x). Unit of result is uWatt. + time period (y-x). Unit of result is uWatt:: + if (Jy < Jx) // Rollover has occurred Jdelta = (Jy + Jmax) - Jx else @@ -90,13 +118,14 @@ time period (y-x). Unit of result is uWatt. This driver provides PwrCPUave and interval(default is 10 millisecond and maximum is 1 second): + * power1_average (PwrCPUave) * power1_average_interval (Interval) The power1_average_interval can be updated at /etc/sensors3.conf file as below: -chip "fam15h_power-*" +chip `fam15h_power-*` set power1_average_interval 0.01 Then save it with "sensors -s". From patchwork Wed Apr 17 09:46:16 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905091 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4BAFB17E0 for ; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 3409B288D0 for ; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 2890528980; Wed, 17 Apr 2019 09:48:37 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 49D2D288D0 for ; Wed, 17 Apr 2019 09:48:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731673AbfDQJqh (ORCPT ); Wed, 17 Apr 2019 05:46:37 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44512 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731635AbfDQJqh (ORCPT ); Wed, 17 Apr 2019 05:46:37 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=T9FpEx+v6dirYQZTfEZfPbIv51pWI5oRflnlTBdAXUY=; b=goV7bMHicbYRntVJTgbguoBQaM Odm046UHeDAmg2npO9g6EYrSR113MwbsQazz0BACus9WBjjqPYUGkvnLb3soZQ5jgKkfWrZb00sX/ 9mtZNPgrQ7tmvLQIXOWA/obkh8SdXIZFjm7qjqmVrI1K/793LmbIMVeSHW9yE5i7J2sHzB3X2KTWM 9HV+gP1CP+kiqBL1VgrMaIUzGWaAlAZuAUZUUaMCY9shdXfIk7FQhEXlpb4abRBpH2j69wRRPc9vY iFYT1IIZSRup5pgZq9sFqX6p2YKnHFNQStbb/Ssy997oP3Es6g8GfWz9SMOSOoC5V0b5EQPEhlgDD 4byUu/Aw==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000a9-Hk; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003ua-VO; Wed, 17 Apr 2019 06:46:30 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 08/21] docs: hwmon: w83791d: convert to ReST format Date: Wed, 17 Apr 2019 06:46:16 -0300 Message-Id: <38a07bc9042995a8fa88ba59f847238fcdff1c0e.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert w83791d to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/w83791d | 123 +++++++++++++++++++++--------------- 1 file changed, 71 insertions(+), 52 deletions(-) diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index f4021a285460..a91f9e5fb0c6 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -2,9 +2,13 @@ Kernel driver w83791d ===================== Supported chips: + * Winbond W83791D + Prefix: 'w83791d' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791D_W83791Gb.pdf Author: Charles Spirakis @@ -12,39 +16,46 @@ Author: Charles Spirakis This driver was derived from the w83781d.c and w83792d.c source files. Credits: + w83781d.c: - Frodo Looijaard , - Philip Edelbrock , - and Mark Studebaker + + - Frodo Looijaard , + - Philip Edelbrock , + - Mark Studebaker + w83792d.c: - Shane Huang (Winbond), - Rudolf Marek + + - Shane Huang (Winbond), + - Rudolf Marek Additional contributors: - Sven Anders - Marc Hulsman + + - Sven Anders + - Marc Hulsman Module Parameters ----------------- * init boolean - (default 0) - Use 'init=1' to have the driver do extra software initializations. - The default behavior is to do the minimum initialization possible - and depend on the BIOS to properly setup the chip. If you know you - have a w83791d and you're having problems, try init=1 before trying - reset=1. + (default 0) + + Use 'init=1' to have the driver do extra software initializations. + The default behavior is to do the minimum initialization possible + and depend on the BIOS to properly setup the chip. If you know you + have a w83791d and you're having problems, try init=1 before trying + reset=1. * reset boolean - (default 0) - Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default - behavior is no chip reset to preserve BIOS settings. + (default 0) + + Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default + behavior is no chip reset to preserve BIOS settings. * force_subclients=bus,caddr,saddr,saddr - This is used to force the i2c addresses for subclients of - a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b' - to force the subclients of chip 0x2f on bus 0 to i2c addresses - 0x4a and 0x4b. + This is used to force the i2c addresses for subclients of + a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b` + to force the subclients of chip 0x2f on bus 0 to i2c addresses + 0x4a and 0x4b. Description @@ -91,11 +102,11 @@ This file is used for both legacy and new code. The sysfs interface to the beep bitmask has migrated from the original legacy method of a single sysfs beep_mask file to a newer method using multiple -*_beep files as described in .../Documentation/hwmon/sysfs-interface. +`*_beep` files as described in `Documentation/hwmon/sysfs-interface`. A similar change has occurred for the bitmap corresponding to the alarms. The original legacy method used a single sysfs alarms file containing a bitmap -of triggered alarms. The newer method uses multiple sysfs *_alarm files +of triggered alarms. The newer method uses multiple sysfs `*_alarm` files (again following the pattern described in sysfs-interface). Since both methods read and write the underlying hardware, they can be used @@ -116,46 +127,54 @@ User mode code requesting values more often will receive cached values. The sysfs-interface is documented in the 'sysfs-interface' file. Only chip-specific options are documented here. -pwm[1-3]_enable - this file controls mode of fan/temperature control for +======================= ======================================================= +pwm[1-3]_enable this file controls mode of fan/temperature control for fan 1-3. Fan/PWM 4-5 only support manual mode. - * 1 Manual mode - * 2 Thermal Cruise mode - * 3 Fan Speed Cruise mode (no further support) -temp[1-3]_target - defines the target temperature for Thermal Cruise mode. + * 1 Manual mode + * 2 Thermal Cruise mode + * 3 Fan Speed Cruise mode (no further support) + +temp[1-3]_target defines the target temperature for Thermal Cruise mode. Unit: millidegree Celsius RW -temp[1-3]_tolerance - temperature tolerance for Thermal Cruise mode. +temp[1-3]_tolerance temperature tolerance for Thermal Cruise mode. Specifies an interval around the target temperature in which the fan speed is not changed. Unit: millidegree Celsius RW +======================= ======================================================= Alarms bitmap vs. beep_mask bitmask ------------------------------------- +----------------------------------- + For legacy code using the alarms and beep_mask files: -in0 (VCORE) : alarms: 0x000001 beep_mask: 0x000001 -in1 (VINR0) : alarms: 0x000002 beep_mask: 0x002000 <== mismatch -in2 (+3.3VIN): alarms: 0x000004 beep_mask: 0x000004 -in3 (5VDD) : alarms: 0x000008 beep_mask: 0x000008 -in4 (+12VIN) : alarms: 0x000100 beep_mask: 0x000100 -in5 (-12VIN) : alarms: 0x000200 beep_mask: 0x000200 -in6 (-5VIN) : alarms: 0x000400 beep_mask: 0x000400 -in7 (VSB) : alarms: 0x080000 beep_mask: 0x010000 <== mismatch -in8 (VBAT) : alarms: 0x100000 beep_mask: 0x020000 <== mismatch -in9 (VINR1) : alarms: 0x004000 beep_mask: 0x004000 -temp1 : alarms: 0x000010 beep_mask: 0x000010 -temp2 : alarms: 0x000020 beep_mask: 0x000020 -temp3 : alarms: 0x002000 beep_mask: 0x000002 <== mismatch -fan1 : alarms: 0x000040 beep_mask: 0x000040 -fan2 : alarms: 0x000080 beep_mask: 0x000080 -fan3 : alarms: 0x000800 beep_mask: 0x000800 -fan4 : alarms: 0x200000 beep_mask: 0x200000 -fan5 : alarms: 0x400000 beep_mask: 0x400000 -tart1 : alarms: 0x010000 beep_mask: 0x040000 <== mismatch -tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch -tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch -case_open : alarms: 0x001000 beep_mask: 0x001000 -global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable) +============= ======== ========= ========================== +Signal Alarms beep_mask Obs +============= ======== ========= ========================== +in0 (VCORE) 0x000001 0x000001 +in1 (VINR0) 0x000002 0x002000 <== mismatch +in2 (+3.3VIN) 0x000004 0x000004 +in3 (5VDD) 0x000008 0x000008 +in4 (+12VIN) 0x000100 0x000100 +in5 (-12VIN) 0x000200 0x000200 +in6 (-5VIN) 0x000400 0x000400 +in7 (VSB) 0x080000 0x010000 <== mismatch +in8 (VBAT) 0x100000 0x020000 <== mismatch +in9 (VINR1) 0x004000 0x004000 +temp1 0x000010 0x000010 +temp2 0x000020 0x000020 +temp3 0x002000 0x000002 <== mismatch +fan1 0x000040 0x000040 +fan2 0x000080 0x000080 +fan3 0x000800 0x000800 +fan4 0x200000 0x200000 +fan5 0x400000 0x400000 +tart1 0x010000 0x040000 <== mismatch +tart2 0x020000 0x080000 <== mismatch +tart3 0x040000 0x100000 <== mismatch +case_open 0x001000 0x001000 +global_enable - 0x800000 (modified via beep_enable) +============= ======== ========= ========================== From patchwork Wed Apr 17 09:46:17 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905089 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 28EA013B5 for ; Wed, 17 Apr 2019 09:48:36 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1256B288D0 for ; Wed, 17 Apr 2019 09:48:36 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 071BB2892E; Wed, 17 Apr 2019 09:48:36 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 8746B288D2 for ; Wed, 17 Apr 2019 09:48:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731678AbfDQJqh (ORCPT ); Wed, 17 Apr 2019 05:46:37 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44478 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731632AbfDQJqh (ORCPT ); Wed, 17 Apr 2019 05:46:37 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=XJ5nNnNov1WL9We9Rkq0YuX1IdpxSUQHOhnmRyQ5KdY=; b=sKSNJPQLGO0D/zt+T5GNzRoia8 9UjLRTJFRkxV/JrJwL5Orq08QFcfZjJn8stjoQs8LTYmwhq1g5O/lMUFt4uWLlpdQJoMa9L9v2M2x lXXqjJrE7gJEe2RllGIbUrfXY1nCTrv+rWJm6QQJUCNARy0unLvjS6MN9AKfG+0inKpVO36cab4Dt h/ngBkXfGCAuRWcobOJVpfRQ9T5JmPYE7hkZaInb7HfHEemwmfgWxy2fAoUGtYfS3StG9CJnjNR4p GNqwHp6U8DCb7e+umFCnUVM7Vr2pMFJMTpJo8DHgc+guD80pfN/G8QtLTSo32fW/LJPYXIYIerhGS 2i3X7+9w==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000aB-Gg; Wed, 17 Apr 2019 09:46:34 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9C-0003ue-WF; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 09/21] docs: hwmon: coretemp: convert to ReST format Date: Wed, 17 Apr 2019 06:46:17 -0300 Message-Id: <5d264b71876d4e03dd72e27749158a30794cc1b8.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert coretemp to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/coretemp | 46 +++++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 16 deletions(-) diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index fec5a9bf755f..c609329e3bc4 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -3,20 +3,29 @@ Kernel driver coretemp Supported chips: * All Intel Core family + Prefix: 'coretemp' - CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm), - 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm), - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield), - 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom), - 0x36 (Cedar Trail Atom) - Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual - Volume 3A: System Programming Guide - http://softwarecommunity.intel.com/Wiki/Mobility/720.htm + + CPUID: family 0x6, models + + - 0xe (Pentium M DC), 0xf (Core 2 DC 65nm), + - 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm), + - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield), + - 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom), + - 0x36 (Cedar Trail Atom) + + Datasheet: + + Intel 64 and IA-32 Architectures Software Developer's Manual + Volume 3A: System Programming Guide + + http://softwarecommunity.intel.com/Wiki/Mobility/720.htm Author: Rudolf Marek Description ----------- + This driver permits reading the DTS (Digital Temperature Sensor) embedded inside Intel CPUs. This driver can read both the per-core and per-package temperature using the appropriate sensors. The per-package sensor is new; @@ -35,14 +44,17 @@ may be raised, if the temperature grows enough (more than TjMax) to trigger the Out-Of-Spec bit. Following table summarizes the exported sysfs files: All Sysfs entries are named with their core_id (represented here by 'X'). -tempX_input - Core temperature (in millidegrees Celsius). -tempX_max - All cooling devices should be turned on (on Core2). -tempX_crit - Maximum junction temperature (in millidegrees Celsius). -tempX_crit_alarm - Set when Out-of-spec bit is set, never clears. - Correct CPU operation is no longer guaranteed. -tempX_label - Contains string "Core X", where X is processor - number. For Package temp, this will be "Physical id Y", - where Y is the package number. + +================= ======================================================== +tempX_input Core temperature (in millidegrees Celsius). +tempX_max All cooling devices should be turned on (on Core2). +tempX_crit Maximum junction temperature (in millidegrees Celsius). +tempX_crit_alarm Set when Out-of-spec bit is set, never clears. + Correct CPU operation is no longer guaranteed. +tempX_label Contains string "Core X", where X is processor + number. For Package temp, this will be "Physical id Y", + where Y is the package number. +================= ======================================================== On CPU models which support it, TjMax is read from a model-specific register. On other models, it is set to an arbitrary value based on weak heuristics. @@ -52,6 +64,7 @@ as a module parameter (tjmax). Appendix A. Known TjMax lists (TBD): Some information comes from ark.intel.com +=============== =============================================== ================ Process Processor TjMax(C) 22nm Core i5/i7 Processors @@ -179,3 +192,4 @@ Process Processor TjMax(C) 65nm Celeron Processors T1700/1600 100 560/550/540/530 100 +=============== =============================================== ================ From patchwork Wed Apr 17 09:46:18 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905067 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EB94A17E6 for ; Wed, 17 Apr 2019 09:47:12 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D6226288D2 for ; Wed, 17 Apr 2019 09:47:12 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id CA82628980; Wed, 17 Apr 2019 09:47:12 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D135A2892E for ; Wed, 17 Apr 2019 09:47:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731791AbfDQJrL (ORCPT ); Wed, 17 Apr 2019 05:47:11 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:45122 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731716AbfDQJqk (ORCPT ); Wed, 17 Apr 2019 05:46:40 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=l7KuQXP8ekBrckKFuXPKEKBVP38Sacyqxjuqo4eD4aI=; b=trGi6bVsdxZwsVloKfaDN5Y4pX L+GXO5budAkrmzroxxu7fwHkH3ImYhHazQND17uPYZTKfTexvsPDvBlr1GPc5gNmeJwMkx9S/Talq IXCqfZDeQ9qD9z/k5zLR47hhroQ8d1IjKmZuGgm1IzWx5T5aIGuSxm72m0l90hdwzPW5xnfB921rm vHSaciMVTOf/OWSKqET/fkjoYm5GBtU6Lt/5R/O9oqSma7zcz/gI3wf/m5oTKucMLbfai5ko9NbL3 iWU7wcePPH5k3j5mf3nU1/aoHH98/qx3YMUn0JwzDYqU3QJ5PoObkqP+4Q2AICofdpectjCEwVDlP uFPWlQxg==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aC-5s; Wed, 17 Apr 2019 09:46:38 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003uj-0t; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , Joel Stanley , Andrew Jeffery , linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org Subject: [PATCH v3 10/21] docs: hwmon: aspeed-pwm-tacho: convert to ReST format Date: Wed, 17 Apr 2019 06:46:18 -0300 Message-Id: <8461d6c50972d2e5ec90d71e3db18ac2f7edf455.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert aspeed-pwm-tacho to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/aspeed-pwm-tacho | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/hwmon/aspeed-pwm-tacho b/Documentation/hwmon/aspeed-pwm-tacho index 7cfb34977460..6dcec845fbc7 100644 --- a/Documentation/hwmon/aspeed-pwm-tacho +++ b/Documentation/hwmon/aspeed-pwm-tacho @@ -15,8 +15,10 @@ controller supports up to 16 tachometer inputs. The driver provides the following sensor accesses in sysfs: +=============== ======= ===================================================== fanX_input ro provide current fan rotation value in RPM as reported by the fan to the device. pwmX rw get or set PWM fan control value. This is an integer value between 0(off) and 255(full speed). +=============== ======= ===================================================== From patchwork Wed Apr 17 09:46:19 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905073 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1C06317E0 for ; Wed, 17 Apr 2019 09:47:39 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 04E4C288D0 for ; Wed, 17 Apr 2019 09:47:39 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id ED61A2892E; Wed, 17 Apr 2019 09:47:38 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 844ED28984 for ; Wed, 17 Apr 2019 09:47:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731818AbfDQJri (ORCPT ); Wed, 17 Apr 2019 05:47:38 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:45050 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731710AbfDQJqk (ORCPT ); Wed, 17 Apr 2019 05:46:40 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=pN8YptXx1xrUPVntgy7n3du+toVS3b1++92qgrif+/U=; b=KnxpLqp3IxArsqb/4nvOt9Ia29 8ATNATe7r1EcU82uLVQ1eFZgUR9IyPWFN59fS/xWtVeDGrPSMTu2W99ZPZDlb+Lq4nW/HNfunM4nN zLv3PypiqzecThb5f4H5FrRScKGrUhSBRatVROcbri4t6b4H39muBYnq8U+R3ekXqM1hwKpZMDrqw bNNUNwki+5Hs0oLp1VXAWigP3N6kHGNsq5q29HPLpYqhnQnmFdKMszaVHwd61hHUkDV0tz3+KB2Ug 4BB9zMYcpJwHbjxCB28nSJ1pdTSPykvKH+9oVegg7rcCWqi0eAasL7IcQEhiBoPMhcVCPMiYjyBz+ D5it8gIQ==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aD-61; Wed, 17 Apr 2019 09:46:38 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003ur-1n; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , Benjamin Herrenschmidt , Paul Mackerras , Michael Ellerman , linux-hwmon@vger.kernel.org, linuxppc-dev@lists.ozlabs.org Subject: [PATCH v3 11/21] docs: hwmon: ibmpowernv: convert to ReST format Date: Wed, 17 Apr 2019 06:46:19 -0300 Message-Id: X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert ibmpowernv to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/ibmpowernv | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv index 56468258711f..5d642bc3dec0 100644 --- a/Documentation/hwmon/ibmpowernv +++ b/Documentation/hwmon/ibmpowernv @@ -2,6 +2,7 @@ Kernel Driver IBMPOWERNV ======================== Supported systems: + * Any recent IBM P servers based on POWERNV platform Author: Neelesh Gupta @@ -29,10 +30,11 @@ CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'. Sysfs attributes ---------------- +======================= ======================================================= fanX_input Measured RPM value. fanX_min Threshold RPM for alert generation. -fanX_fault 0: No fail condition - 1: Failing fan +fanX_fault - 0: No fail condition + - 1: Failing fan tempX_input Measured ambient temperature. tempX_max Threshold ambient temperature for alert generation. @@ -42,20 +44,22 @@ tempX_enable Enable/disable all temperature sensors belonging to the sub-group. In POWER9, this attribute corresponds to each OCC. Using this attribute each OCC can be asked to disable/enable all of its temperature sensors. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable inX_input Measured power supply voltage (millivolt) -inX_fault 0: No fail condition. - 1: Failing power supply. +inX_fault - 0: No fail condition. + - 1: Failing power supply. inX_highest Historical maximum voltage inX_lowest Historical minimum voltage inX_enable Enable/disable all voltage sensors belonging to the sub-group. In POWER9, this attribute corresponds to each OCC. Using this attribute each OCC can be asked to disable/enable all of its voltage sensors. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable powerX_input Power consumption (microWatt) powerX_input_highest Historical maximum power @@ -64,8 +68,9 @@ powerX_enable Enable/disable all power sensors belonging to the sub-group. In POWER9, this attribute corresponds to each OCC. Using this attribute each OCC can be asked to disable/enable all of its power sensors. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable currX_input Measured current (milliampere) currX_highest Historical maximum current @@ -74,7 +79,9 @@ currX_enable Enable/disable all current sensors belonging to the sub-group. In POWER9, this attribute corresponds to each OCC. Using this attribute each OCC can be asked to disable/enable all of its current sensors. - 1: Enable - 0: Disable + + - 1: Enable + - 0: Disable energyX_input Cumulative energy (microJoule) +======================= ======================================================= From patchwork Wed Apr 17 09:46:20 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905079 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id DD25F17E0 for ; Wed, 17 Apr 2019 09:48:07 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id C607B288D0 for ; Wed, 17 Apr 2019 09:48:07 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id BA45C28980; Wed, 17 Apr 2019 09:48:07 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 0CB08288D0 for ; Wed, 17 Apr 2019 09:48:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731542AbfDQJr4 (ORCPT ); Wed, 17 Apr 2019 05:47:56 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44942 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731703AbfDQJqj (ORCPT ); Wed, 17 Apr 2019 05:46:39 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=/DoZqJ47XdGMH8UMjypS+5ERMfAgqAifsh9MIk2OSH4=; b=I0nJi0iLds2lEPiYoXNUo1ljS+ 5A/G01cLdmgaNuOOMACnDDRVYR3bsyX40u82Keh+KV/uejFmvnAv16PHlpwAgI+OMpw716TBW+QA8 7m6J9Mb4nXYsWrQKULLiUsWaRql9yg/IlNPa6hbfLiJYmMBC2YQdPoPMbOZhTPfOwqTYZ5F3iTrle BgSRiS8z+OyPPKzumO/RkxOhsctoUU8m0FW7NFxb+8i+Wk8BvVDq6QnvJu0vDVr1lQIOKqiLW43ox X2Cn6StCVxu5ENEkZIEis564R3YCsMldFGxq5AdniaqZvw8HmtsNokp3aUwvqe8NAQf1QFnvPNxj6 X0F0fsgQ==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aE-5p; Wed, 17 Apr 2019 09:46:38 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003uz-2d; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 12/21] docs: hwmon: asc7621: convert to ReST format Date: Wed, 17 Apr 2019 06:46:20 -0300 Message-Id: <25014c2dc28a758b01b14400e484b30a8f553e33.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert asc7621 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/asc7621 | 146 ++++++++++++++++++++++-------------- 1 file changed, 88 insertions(+), 58 deletions(-) diff --git a/Documentation/hwmon/asc7621 b/Documentation/hwmon/asc7621 index 7287be7e1f21..b5a9fad0f172 100644 --- a/Documentation/hwmon/asc7621 +++ b/Documentation/hwmon/asc7621 @@ -1,10 +1,15 @@ +===================== Kernel driver asc7621 -================== +===================== Supported chips: + Andigilog aSC7621 and aSC7621a + Prefix: 'asc7621' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.fairview5.com/linux/asc7621/asc7621.pdf Author: @@ -73,8 +78,10 @@ Finally, we have added a tach disable function that turns off the tach measurement system for individual tachs in order to save power. That is in register 75h. --- +-------------------------------------------------------------------------- + aSC7621 Product Description +=========================== The aSC7621 has a two wire digital interface compatible with SMBus 2.0. Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode @@ -102,6 +109,8 @@ System voltages of VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard power are monitored efficiently with internal scaling resistors. Features +-------- + - Supports PECI interface and monitors internal and remote thermal diodes - 2-wire, SMBus 2.0 compliant, serial interface - 10-bit ADC @@ -110,7 +119,7 @@ Features - Noise filtering of temperature reading for fan speed control - 0.25C digital temperature sensor resolution - 3 PWM fan speed control outputs for 2-, 3- or 4-wire fans and up to 4 fan - tachometer inputs + tachometer inputs - Enhanced measured temperature to Temperature Zone assignment. - Provides high and low PWM frequency ranges - 3 GPIO pins for custom use @@ -123,17 +132,20 @@ Except where noted below, the sysfs entries created by this driver follow the standards defined in "sysfs-interface". temp1_source + = =============================================== 0 (default) peci_legacy = 0, Remote 1 Temperature - peci_legacy = 1, PECI Processor Temperature 0 + peci_legacy = 1, PECI Processor Temperature 0 1 Remote 1 Temperature 2 Remote 2 Temperature 3 Internal Temperature 4 PECI Processor Temperature 0 5 PECI Processor Temperature 1 6 PECI Processor Temperature 2 - 7 PECI Processor Temperature 3 + 7 PECI Processor Temperature 3 + = =============================================== temp2_source + = =============================================== 0 (default) Internal Temperature 1 Remote 1 Temperature 2 Remote 2 Temperature @@ -142,8 +154,10 @@ temp2_source 5 PECI Processor Temperature 1 6 PECI Processor Temperature 2 7 PECI Processor Temperature 3 + = =============================================== temp3_source + = =============================================== 0 (default) Remote 2 Temperature 1 Remote 1 Temperature 2 Remote 2 Temperature @@ -152,10 +166,12 @@ temp3_source 5 PECI Processor Temperature 1 6 PECI Processor Temperature 2 7 PECI Processor Temperature 3 + = =============================================== temp4_source + = =============================================== 0 (default) peci_legacy = 0, PECI Processor Temperature 0 - peci_legacy = 1, Remote 1 Temperature + peci_legacy = 1, Remote 1 Temperature 1 Remote 1 Temperature 2 Remote 2 Temperature 3 Internal Temperature @@ -163,58 +179,65 @@ temp4_source 5 PECI Processor Temperature 1 6 PECI Processor Temperature 2 7 PECI Processor Temperature 3 + = =============================================== -temp[1-4]_smoothing_enable -temp[1-4]_smoothing_time +temp[1-4]_smoothing_enable / temp[1-4]_smoothing_time Smooths spikes in temp readings caused by noise. Valid values in milliseconds are: - 35000 - 17600 - 11800 - 7000 - 4400 - 3000 - 1600 - 800 + + * 35000 + * 17600 + * 11800 + * 7000 + * 4400 + * 3000 + * 1600 + * 800 temp[1-4]_crit When the corresponding zone temperature reaches this value, ALL pwm outputs will got to 100%. -temp[5-8]_input -temp[5-8]_enable +temp[5-8]_input / temp[5-8]_enable The aSC7621 can also read temperatures provided by the processor via the PECI bus. Usually these are "core" temps and are relative to the point where the automatic thermal control circuit starts throttling. This means that these are usually negative numbers. pwm[1-3]_enable + =============== ======================================================== 0 Fan off. 1 Fan on manual control. 2 Fan on automatic control and will run at the minimum pwm - if the temperature for the zone is below the minimum. - 3 Fan on automatic control but will be off if the temperature - for the zone is below the minimum. - 4-254 Ignored. + if the temperature for the zone is below the minimum. + 3 Fan on automatic control but will be off if the + temperature for the zone is below the minimum. + 4-254 Ignored. 255 Fan on full. + =============== ======================================================== pwm[1-3]_auto_channels Bitmap as described in sysctl-interface with the following exceptions... + Only the following combination of zones (and their corresponding masks) are valid: - 1 - 2 - 3 - 2,3 - 1,2,3 - 4 - 1,2,3,4 - Special values: - 0 Disabled. - 16 Fan on manual control. - 31 Fan on full. + * 1 + * 2 + * 3 + * 2,3 + * 1,2,3 + * 4 + * 1,2,3,4 + + * Special values: + + == ====================== + 0 Disabled. + 16 Fan on manual control. + 31 Fan on full. + == ====================== pwm[1-3]_invert @@ -226,22 +249,22 @@ pwm[1-3]_freq PWM frequency in Hz Valid values in Hz are: - 10 - 15 - 23 - 30 (default) - 38 - 47 - 62 - 94 - 23000 - 24000 - 25000 - 26000 - 27000 - 28000 - 29000 - 30000 + * 10 + * 15 + * 23 + * 30 (default) + * 38 + * 47 + * 62 + * 94 + * 23000 + * 24000 + * 25000 + * 26000 + * 27000 + * 28000 + * 29000 + * 30000 Setting any other value will be ignored. @@ -251,17 +274,17 @@ peci_enable peci_avg Input filter average time. - 0 0 Sec. (no Smoothing) (default) - 1 0.25 Sec. - 2 0.5 Sec. - 3 1.0 Sec. - 4 2.0 Sec. - 5 4.0 Sec. - 6 8.0 Sec. - 7 0.0 Sec. + * 0 0 Sec. (no Smoothing) (default) + * 1 0.25 Sec. + * 2 0.5 Sec. + * 3 1.0 Sec. + * 4 2.0 Sec. + * 5 4.0 Sec. + * 6 8.0 Sec. + * 7 0.0 Sec. peci_legacy - + = ============================================ 0 Standard Mode (default) Remote Diode 1 reading is associated with Temperature Zone 1, PECI is associated with @@ -270,10 +293,12 @@ peci_legacy 1 Legacy Mode PECI is associated with Temperature Zone 1, Remote Diode 1 is associated with Zone 4 + = ============================================ peci_diode Diode filter + = ==================== 0 0.25 Sec. 1 1.1 Sec. 2 2.4 Sec. (default) @@ -282,15 +307,20 @@ peci_diode 5 6.8 Sec. 6 10.2 Sec. 7 16.4 Sec. + = ==================== peci_4domain Four domain enable + = =============================================== 0 1 or 2 Domains for enabled processors (default) 1 3 or 4 Domains for enabled processors + = =============================================== peci_domain Domain + = ================================================== 0 Processor contains a single domain (0) (default) 1 Processor contains two domains (0,1) + = ================================================== From patchwork Wed Apr 17 09:46:21 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905081 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B37C013B5 for ; Wed, 17 Apr 2019 09:48:08 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 9E381288D0 for ; Wed, 17 Apr 2019 09:48:08 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 9264828984; Wed, 17 Apr 2019 09:48:08 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 0A9A5288D0 for ; Wed, 17 Apr 2019 09:48:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731561AbfDQJsH (ORCPT ); Wed, 17 Apr 2019 05:48:07 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44958 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731705AbfDQJqj (ORCPT ); Wed, 17 Apr 2019 05:46:39 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=HBtp3BEM97J+VvxjcyTQ0Rh8cs8lWpfrxcjNLnrN9tA=; b=QuB7dVywcb51QyXd2/yU4BZRab KEogfLYvP3CXsGMEU4U9XS+VkPu1K/gIo7EgzoYDiS0BpOXFUoDOkAfPiYvJlHYhNwixNyp/T6IKL BSjXpbEmWjiIpZxYHGarBu1LR37S3w8NL76umpjR4zLb89J+Pr6Ky3Uzag/EtsKVK0PILAbQJr6Ax tsocT4IyWPFWTw8/VKBLB4NYc01ox75f/W94yyNww6u8NBSvnCuDXOaPHertsSv8ILG0j+KVNAolV Iwd/nyWnIvDFc+v733kdmZA03aT/MhfvH5opFabb/6siM7SJ1EqaTlXv6Y3YwvAQnGIv8ndndqN9u bydtP2sw==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aF-89; Wed, 17 Apr 2019 09:46:38 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003v4-3U; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 13/21] docs: hwmon: ads1015: convert to ReST format Date: Wed, 17 Apr 2019 06:46:21 -0300 Message-Id: <1a1413f4f87db98026c59f79a278ed5e6cdd78d2.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert ads1015 to ReST format, in order to allow it to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/ads1015 | 72 ++++++++++++++++++++++--------------- 1 file changed, 43 insertions(+), 29 deletions(-) diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015 index 02d2a459385f..e0951c4e57bb 100644 --- a/Documentation/hwmon/ads1015 +++ b/Documentation/hwmon/ads1015 @@ -2,17 +2,25 @@ Kernel driver ads1015 ===================== Supported chips: + * Texas Instruments ADS1015 + Prefix: 'ads1015' - Datasheet: Publicly available at the Texas Instruments website : - http://focus.ti.com/lit/ds/symlink/ads1015.pdf + + Datasheet: Publicly available at the Texas Instruments website: + + http://focus.ti.com/lit/ds/symlink/ads1015.pdf + * Texas Instruments ADS1115 + Prefix: 'ads1115' - Datasheet: Publicly available at the Texas Instruments website : - http://focus.ti.com/lit/ds/symlink/ads1115.pdf + + Datasheet: Publicly available at the Texas Instruments website: + + http://focus.ti.com/lit/ds/symlink/ads1115.pdf Authors: - Dirk Eibach, Guntermann & Drunck GmbH + Dirk Eibach, Guntermann & Drunck GmbH Description ----------- @@ -24,14 +32,15 @@ This device is a 12/16-bit A-D converter with 4 inputs. The inputs can be used single ended or in certain differential combinations. The inputs can be made available by 8 sysfs input files in0_input - in7_input: -in0: Voltage over AIN0 and AIN1. -in1: Voltage over AIN0 and AIN3. -in2: Voltage over AIN1 and AIN3. -in3: Voltage over AIN2 and AIN3. -in4: Voltage over AIN0 and GND. -in5: Voltage over AIN1 and GND. -in6: Voltage over AIN2 and GND. -in7: Voltage over AIN3 and GND. + + - in0: Voltage over AIN0 and AIN1. + - in1: Voltage over AIN0 and AIN3. + - in2: Voltage over AIN1 and AIN3. + - in3: Voltage over AIN2 and AIN3. + - in4: Voltage over AIN0 and GND. + - in5: Voltage over AIN1 and GND. + - in6: Voltage over AIN2 and GND. + - in7: Voltage over AIN3 and GND. Which inputs are available can be configured using platform data or devicetree. @@ -42,29 +51,34 @@ Platform Data In linux/platform_data/ads1015.h platform data is defined, channel_data contains configuration data for the used input combinations: + - pga is the programmable gain amplifier (values are full scale) - 0: +/- 6.144 V - 1: +/- 4.096 V - 2: +/- 2.048 V - 3: +/- 1.024 V - 4: +/- 0.512 V - 5: +/- 0.256 V + + - 0: +/- 6.144 V + - 1: +/- 4.096 V + - 2: +/- 2.048 V + - 3: +/- 1.024 V + - 4: +/- 0.512 V + - 5: +/- 0.256 V + - data_rate in samples per second - 0: 128 - 1: 250 - 2: 490 - 3: 920 - 4: 1600 - 5: 2400 - 6: 3300 -Example: -struct ads1015_platform_data data = { + - 0: 128 + - 1: 250 + - 2: 490 + - 3: 920 + - 4: 1600 + - 5: 2400 + - 6: 3300 + +Example:: + + struct ads1015_platform_data data = { .channel_data = { [2] = { .enabled = true, .pga = 1, .data_rate = 0 }, [4] = { .enabled = true, .pga = 4, .data_rate = 5 }, } -}; + }; In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input (FS +/- 0.512 V, 2400 SPS) would be created. From patchwork Wed Apr 17 09:46:22 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905085 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 31CCB17E0 for ; Wed, 17 Apr 2019 09:48:25 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1679B288D0 for ; Wed, 17 Apr 2019 09:48:25 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 0A64A2892E; Wed, 17 Apr 2019 09:48:25 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D2D6E288D0 for ; Wed, 17 Apr 2019 09:48:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731895AbfDQJsI (ORCPT ); Wed, 17 Apr 2019 05:48:08 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44966 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731706AbfDQJqj (ORCPT ); Wed, 17 Apr 2019 05:46:39 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=ulutPdeq76TIAwFutCNSAnXWKpsBCVZyfKMBQDg50Ww=; b=LUHi1/3No//Nnj3kxiHaAmkoUI Zot0+K5/oDYj+LkGevhlydv8lqLIfVI4Tv/DOsbCO9JX62UdQbMwMP1nWK7vownFqGXDiQaBycGEj 0usrR16Xx4ljliGCA3Y4nKEcAyohY/ctbNaAg4tzMDUibD2cGSjQ/RBybbn+niI3WONudnCD2bKqw xChbeZSsn4BWZaQPusCDaSpMbuZdL/gqnEw1su5hry0ejdFJ8YvXbZxBF7XVgPXifGwbSZv9tnvh3 +2sBxN2pC3rp6LPk6XTpJVjo4uy+KL5STRy5ojW0c5JWiEuPzwbS3FDhl1B9rOM9d4Sg0BWZaRGUg DomcsnAA==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aG-7a; Wed, 17 Apr 2019 09:46:38 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003vA-4J; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 14/21] docs: hwmon: dme1737, vt1211: convert to ReST format Date: Wed, 17 Apr 2019 06:46:22 -0300 Message-Id: X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert dme1737 and vt1211 to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/dme1737 | 88 ++++++++++++++++++++++++++----------- Documentation/hwmon/vt1211 | 84 +++++++++++++++++++++-------------- 2 files changed, 114 insertions(+), 58 deletions(-) diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 4d2935145a1c..82fcbc6b2b43 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -2,21 +2,37 @@ Kernel driver dme1737 ===================== Supported chips: + * SMSC DME1737 and compatibles (like Asus A8000) + Prefix: 'dme1737' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA + * SMSC SCH3112, SCH3114, SCH3116 + Prefix: 'sch311x' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Available on the Internet + * SMSC SCH5027 + Prefix: 'sch5027' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA + * SMSC SCH5127 + Prefix: 'sch5127' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Provided by SMSC upon request and under NDA Authors: @@ -26,11 +42,14 @@ Authors: Module Parameters ----------------- -* force_start: bool Enables the monitoring of voltage, fan and temp inputs +* force_start: bool + Enables the monitoring of voltage, fan and temp inputs and PWM output control functions. Using this parameter shouldn't be required since the BIOS usually takes care of this. -* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e + +* probe_all_addr: bool + Include non-standard LPC addresses 0x162e and 0x164e when probing for ISA devices. This is required for the following boards: - VIA EPIA SN18000 @@ -70,7 +89,8 @@ scaling resistors. The values returned by the driver therefore reflect true millivolts and don't need scaling. The voltage inputs are mapped as follows (the last column indicates the input ranges): -DME1737, A8000: +DME1737, A8000:: + in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -79,7 +99,8 @@ DME1737, A8000: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH311x: +SCH311x:: + in0: +2.5V 0V - 3.32V in1: Vccp (processor core) 0V - 2V in2: VCC (internal +3.3V) 0V - 4.38V @@ -88,7 +109,8 @@ SCH311x: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH5027: +SCH5027:: + in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -97,7 +119,8 @@ SCH5027: in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V -SCH5127: +SCH5127:: + in0: +2.5 0V - 3.32V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -119,7 +142,7 @@ Celsius. The chip also features offsets for all 3 temperature inputs which - when programmed - get added to the input readings. The chip does all the scaling by itself and the driver therefore reports true temperatures that don't need any user-space adjustments. The temperature inputs are mapped as follows -(the last column indicates the input ranges): +(the last column indicates the input ranges):: temp1: Remote diode 1 (3904 type) temperature -127C - +127C temp2: DME1737 internal temperature -127C - +127C @@ -171,6 +194,7 @@ pwm[1-3]_auto_pwm_min, respectively. The thermal thresholds of the zones are programmed via zone[1-3]_auto_point[1-3]_temp and zone[1-3]_auto_point1_temp_hyst: + =============================== ======================================= pwm[1-3]_auto_point2_pwm full-speed duty-cycle (255, i.e., 100%) pwm[1-3]_auto_point1_pwm low-speed duty-cycle pwm[1-3]_auto_pwm_min min-speed duty-cycle @@ -179,6 +203,7 @@ zone[1-3]_auto_point1_temp_hyst: zone[1-3]_auto_point2_temp full-speed temp zone[1-3]_auto_point1_temp low-speed temp zone[1-3]_auto_point1_temp_hyst min-speed temp + =============================== ======================================= The chip adjusts the output duty-cycle linearly in the range of auto_point1_pwm to auto_point2_pwm if the temperature of the associated zone is between @@ -192,17 +217,21 @@ all PWM outputs are set to 100% duty-cycle. Following is another representation of how the chip sets the output duty-cycle based on the temperature of the associated thermal zone: - Duty-Cycle Duty-Cycle - Temperature Rising Temp Falling Temp - ----------- ----------- ------------ + =============== =============== ================= + Temperature Duty-Cycle Duty-Cycle + Rising Temp Falling Temp + =============== =============== ================= full-speed full-speed full-speed - < linearly adjusted duty-cycle > + - < linearly - + adjusted + duty-cycle > low-speed low-speed low-speed - min-speed low-speed + - min-speed low-speed min-speed min-speed min-speed - min-speed min-speed + - min-speed min-speed + =============== =============== ================= Sysfs Attributes @@ -211,8 +240,9 @@ Sysfs Attributes Following is a list of all sysfs attributes that the driver provides, their permissions and a short description: +=============================== ======= ======================================= Name Perm Description ----- ---- ----------- +=============================== ======= ======================================= cpu0_vid RO CPU core reference voltage in millivolts. vrm RW Voltage regulator module version @@ -242,9 +272,10 @@ temp[1-3]_fault RO Temp input fault. Returns 1 if the chip zone[1-3]_auto_channels_temp RO Temperature zone to temperature input mapping. This attribute is a bitfield and supports the following values: - 1: temp1 - 2: temp2 - 4: temp3 + + - 1: temp1 + - 2: temp2 + - 4: temp3 zone[1-3]_auto_point1_temp_hyst RW Auto PWM temp point1 hysteresis. The output of the corresponding PWM is set to the pwm_auto_min value if the temp @@ -275,9 +306,10 @@ pmw[1-3,5-6] RO/RW Duty-cycle of PWM output. Supported manual mode. pwm[1-3]_enable RW Enable of PWM outputs 1-3. Supported values are: - 0: turned off (output @ 100%) - 1: manual mode - 2: automatic mode + + - 0: turned off (output @ 100%) + - 1: manual mode + - 2: automatic mode pwm[5-6]_enable RO Enable of PWM outputs 5-6. Always returns 1 since these 2 outputs are hard-wired to manual mode. @@ -294,11 +326,12 @@ pmw[1-3]_ramp_rate RW Ramp rate of PWM output. Determines how pwm[1-3]_auto_channels_zone RW PWM output to temperature zone mapping. This attribute is a bitfield and supports the following values: - 1: zone1 - 2: zone2 - 4: zone3 - 6: highest of zone[2-3] - 7: highest of zone[1-3] + + - 1: zone1 + - 2: zone2 + - 4: zone3 + - 6: highest of zone[2-3] + - 7: highest of zone[1-3] pwm[1-3]_auto_pwm_min RW Auto PWM min pwm. Minimum PWM duty- cycle. Supported values are 0 or auto_point1_pwm. @@ -307,12 +340,14 @@ pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the full-speed duty-cycle which is hard- wired to 255 (100% duty-cycle). +=============================== ======= ======================================= Chip Differences ---------------- +======================= ======= ======= ======= ======= Feature dme1737 sch311x sch5027 sch5127 -------------------------------------------------------- +======================= ======= ======= ======= ======= temp[1-3]_offset yes yes vid yes zone3 yes yes yes @@ -326,3 +361,4 @@ pwm5 opt opt fan6 opt opt pwm6 opt opt in7 yes +======================= ======= ======= ======= ======= diff --git a/Documentation/hwmon/vt1211 b/Documentation/hwmon/vt1211 index 77fa633b97a8..ddbcde7dd642 100644 --- a/Documentation/hwmon/vt1211 +++ b/Documentation/hwmon/vt1211 @@ -2,9 +2,13 @@ Kernel driver vt1211 ==================== Supported chips: + * VIA VT1211 + Prefix: 'vt1211' + Addresses scanned: none, address read from Super-I/O config space + Datasheet: Provided by VIA upon request and under NDA Authors: Juerg Haefliger @@ -19,14 +23,17 @@ technical support. Module Parameters ----------------- -* uch_config: int Override the BIOS default universal channel (UCH) + +* uch_config: int + Override the BIOS default universal channel (UCH) configuration for channels 1-5. Legal values are in the range of 0-31. Bit 0 maps to UCH1, bit 1 maps to UCH2 and so on. Setting a bit to 1 enables the thermal input of that particular UCH and setting a bit to 0 enables the voltage input. -* int_mode: int Override the BIOS default temperature interrupt mode. +* int_mode: int + Override the BIOS default temperature interrupt mode. The only possible value is 0 which forces interrupt mode 0. In this mode, any pending interrupt is cleared when the status register is read but is regenerated as @@ -55,8 +62,9 @@ connected to the PWM outputs of the VT1211 :-(). The following table shows the relationship between the vt1211 inputs and the sysfs nodes. +=============== ============== =========== ================================ Sensor Voltage Mode Temp Mode Default Use (from the datasheet) ------- ------------ --------- -------------------------------- +=============== ============== =========== ================================ Reading 1 temp1 Intel thermal diode Reading 3 temp2 Internal thermal diode UCH1/Reading2 in0 temp3 NTC type thermistor @@ -65,6 +73,7 @@ UCH3 in2 temp5 VccP (processor core) UCH4 in3 temp6 +5V UCH5 in4 temp7 +12V +3.3V in5 Internal VCC (+3.3V) +=============== ============== =========== ================================ Voltage Monitoring @@ -82,19 +91,22 @@ follows. And this is of course totally dependent on the actual board implementation :-) You will have to find documentation for your own motherboard and edit sensors.conf accordingly. - Expected +============= ====== ====== ========= ============ + Expected Voltage R1 R2 Divider Raw Value ------------------------------------------------ +============= ====== ====== ========= ============ +2.5V 2K 10K 1.2 2083 mV -VccP --- --- 1.0 1400 mV (1) +VccP --- --- 1.0 1400 mV [1]_ +5V 14K 10K 2.4 2083 mV +12V 47K 10K 5.7 2105 mV -+3.3V (int) 2K 3.4K 1.588 3300 mV (2) ++3.3V (int) 2K 3.4K 1.588 3300 mV [2]_ +3.3V (ext) 6.8K 10K 1.68 1964 mV +============= ====== ====== ========= ============ -(1) Depending on the CPU (1.4V is for a VIA C3 Nehemiah). -(2) R1 and R2 for 3.3V (int) are internal to the VT1211 chip and the driver - performs the scaling and returns the properly scaled voltage value. +.. [1] Depending on the CPU (1.4V is for a VIA C3 Nehemiah). + +.. [2] R1 and R2 for 3.3V (int) are internal to the VT1211 chip and the driver + performs the scaling and returns the properly scaled voltage value. Each measured voltage has an associated low and high limit which triggers an alarm when crossed. @@ -124,35 +136,37 @@ compute temp1 (@-Offset)/Gain, (@*Gain)+Offset According to the VIA VT1211 BIOS porting guide, the following gain and offset values should be used: +=============== ======== =========== Diode Type Offset Gain ----------- ------ ---- +=============== ======== =========== Intel CPU 88.638 0.9528 - 65.000 0.9686 *) + 65.000 0.9686 [3]_ VIA C3 Ezra 83.869 0.9528 VIA C3 Ezra-T 73.869 0.9528 +=============== ======== =========== -*) This is the formula from the lm_sensors 2.10.0 sensors.conf file. I don't -know where it comes from or how it was derived, it's just listed here for -completeness. +.. [3] This is the formula from the lm_sensors 2.10.0 sensors.conf file. I don't + know where it comes from or how it was derived, it's just listed here for + completeness. Temp3-temp7 support NTC thermistors. For these channels, the driver returns the voltages as seen at the individual pins of UCH1-UCH5. The voltage at the pin (Vpin) is formed by a voltage divider made of the thermistor (Rth) and a -scaling resistor (Rs): +scaling resistor (Rs):: -Vpin = 2200 * Rth / (Rs + Rth) (2200 is the ADC max limit of 2200 mV) + Vpin = 2200 * Rth / (Rs + Rth) (2200 is the ADC max limit of 2200 mV) The equation for the thermistor is as follows (google it if you want to know -more about it): +more about it):: -Rth = Ro * exp(B * (1 / T - 1 / To)) (To is 298.15K (25C) and Ro is the - nominal resistance at 25C) + Rth = Ro * exp(B * (1 / T - 1 / To)) (To is 298.15K (25C) and Ro is the + nominal resistance at 25C) Mingling the above two equations and assuming Rs = Ro and B = 3435 yields the -following formula for sensors.conf: +following formula for sensors.conf:: -compute tempx 1 / (1 / 298.15 - (` (2200 / @ - 1)) / 3435) - 273.15, - 2200 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) + compute tempx 1 / (1 / 298.15 - (` (2200 / @ - 1)) / 3435) - 273.15, + 2200 / (1 + (^ (3435 / 298.15 - 3435 / (273.15 + @)))) Fan Speed Control @@ -176,31 +190,37 @@ registers in the VT1211 and programming one set is sufficient (actually only the first set pwm1_auto_point[1-4]_temp is writable, the second set is read-only). +========================== ========================================= PWM Auto Point PWM Output Duty-Cycle ------------------------------------------------- +========================== ========================================= pwm[1-2]_auto_point4_pwm full speed duty-cycle (hard-wired to 255) pwm[1-2]_auto_point3_pwm high speed duty-cycle pwm[1-2]_auto_point2_pwm low speed duty-cycle pwm[1-2]_auto_point1_pwm off duty-cycle (hard-wired to 0) +========================== ========================================= +========================== ================= Temp Auto Point Thermal Threshold ---------------------------------------------- +========================== ================= pwm[1-2]_auto_point4_temp full speed temp pwm[1-2]_auto_point3_temp high speed temp pwm[1-2]_auto_point2_temp low speed temp pwm[1-2]_auto_point1_temp off temp +========================== ================= Long story short, the controller implements the following algorithm to set the PWM output duty-cycle based on the input temperature: -Thermal Threshold Output Duty-Cycle - (Rising Temp) (Falling Temp) ----------------------------------------------------------- - full speed duty-cycle full speed duty-cycle +=================== ======================= ======================== +Thermal Threshold Output Duty-Cycle Output Duty-Cycle + (Rising Temp) (Falling Temp) +=================== ======================= ======================== +- full speed duty-cycle full speed duty-cycle full speed temp - high speed duty-cycle full speed duty-cycle +- high speed duty-cycle full speed duty-cycle high speed temp - low speed duty-cycle high speed duty-cycle +- low speed duty-cycle high speed duty-cycle low speed temp - off duty-cycle low speed duty-cycle +- off duty-cycle low speed duty-cycle off temp +=================== ======================= ======================== From patchwork Wed Apr 17 09:46:23 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905075 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6E86F13B5 for ; Wed, 17 Apr 2019 09:47:55 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 57658288D0 for ; Wed, 17 Apr 2019 09:47:55 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 4A10128980; Wed, 17 Apr 2019 09:47:55 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id C97F3288D0 for ; Wed, 17 Apr 2019 09:47:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731845AbfDQJri (ORCPT ); Wed, 17 Apr 2019 05:47:38 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44982 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731633AbfDQJqj (ORCPT ); Wed, 17 Apr 2019 05:46:39 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=9LalUJPmuPDaMfLRWCl1lzBZDSX3p4v9Ob+a/oKrM1M=; b=kUr4Vp3hsaiwCMmYlm++/7B9Lr 29ZVXEQ2bn8jMe0gSw2Qnc3cDTf0nWkepLzMpW4vb9YHVNQyqm4bln9nAR7YKRTHZD5vD9Adey4y1 xPbAbX95rglQgbUuWCf0bEfZFn3jACUHRaigO7Yme5kgcLv2cnnxCqo33d/Gzatpr5nrw2C61mwHQ ED5rLFHiQaV+aSb1NAlVo/VmAnNbjaCnyzTYYU/4HRpYHkOgEQKlJGT8z2ZwLNpI+yzdPfvEut48h eSD3DSu32UCsHvKjJTkHcLI8kDhe39ih8SbcYEgMATeGudyv+SEbaWFquMht2UtLsMmia2fWu/ZF4 H7nJ2oIA==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aJ-9x; Wed, 17 Apr 2019 09:46:38 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003vF-59; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 15/21] docs: hwmon: wm831x, wm8350: convert to ReST format Date: Wed, 17 Apr 2019 06:46:23 -0300 Message-Id: <05f285eae86db4c6ea1d8c48f7cca1618de4a3f3.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert wm831x and wm8350 to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/wm831x | 9 ++++++--- Documentation/hwmon/wm8350 | 10 +++++++--- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x index 11446757c8c8..c56fb35a2fb3 100644 --- a/Documentation/hwmon/wm831x +++ b/Documentation/hwmon/wm831x @@ -3,11 +3,14 @@ Kernel driver wm831x-hwmon Supported chips: * Wolfson Microelectronics WM831x PMICs + Prefix: 'wm831x' + Datasheet: - http://www.wolfsonmicro.com/products/WM8310 - http://www.wolfsonmicro.com/products/WM8311 - http://www.wolfsonmicro.com/products/WM8312 + + - http://www.wolfsonmicro.com/products/WM8310 + - http://www.wolfsonmicro.com/products/WM8311 + - http://www.wolfsonmicro.com/products/WM8312 Authors: Mark Brown diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350 index 98f923bd2e92..cec044ca5900 100644 --- a/Documentation/hwmon/wm8350 +++ b/Documentation/hwmon/wm8350 @@ -2,12 +2,16 @@ Kernel driver wm8350-hwmon ========================== Supported chips: + * Wolfson Microelectronics WM835x PMICs + Prefix: 'wm8350' + Datasheet: - http://www.wolfsonmicro.com/products/WM8350 - http://www.wolfsonmicro.com/products/WM8351 - http://www.wolfsonmicro.com/products/WM8352 + + - http://www.wolfsonmicro.com/products/WM8350 + - http://www.wolfsonmicro.com/products/WM8351 + - http://www.wolfsonmicro.com/products/WM8352 Authors: Mark Brown From patchwork Wed Apr 17 09:46:24 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905083 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 648E713B5 for ; Wed, 17 Apr 2019 09:48:09 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 4E626288D0 for ; Wed, 17 Apr 2019 09:48:09 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 42D03288D2; Wed, 17 Apr 2019 09:48:09 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 9F9AC2892E for ; Wed, 17 Apr 2019 09:48:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731499AbfDQJr4 (ORCPT ); Wed, 17 Apr 2019 05:47:56 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44948 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731704AbfDQJqj (ORCPT ); Wed, 17 Apr 2019 05:46:39 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=QQCff89iImXjDA1ktDroJqyQ00Ieb0wfPOW+QkqKVUk=; b=oOHzOQB/pOzkyaPII8W0pSfEfx B3fPP/Zz89MqCc3U4cXign+Xe5R+GncVoK7Wq78FzQFlFcK0FAc+IlUcXU6qFLyIBVFru/0DdOjRs qJaIe4Dcn1kLx/UpHYTBFB4J0tQMz8xnD9Nhdiu9JLdsiV+UfVd55kgwXC7MMMGesp/CSrm2gZQFI FyZ6EoR6OWtgtZ9qIW1sCytjev/PYu/vI0jU7ecJxkc3FJ7vwLLHXiALuxVLjf2YB8gEzuRdVhLtr jd5UccHWqEnO3fwyNHIQV3N7LxsJe9xTd1g6jriaxKMPY/L7+M3Vew8CNOSJDqcJUnJjvPUZzT2gZ Qj+Z4uCg==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aK-AQ; Wed, 17 Apr 2019 09:46:38 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003vK-5z; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 16/21] docs: hwmon: da9052, da9055: convert to ReST format Date: Wed, 17 Apr 2019 06:46:24 -0300 Message-Id: <722f0c2614ba19993fd04266063ad7c09876ff89.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert da9052 and da9055 to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/da9052 | 41 +++++++++++++++++++++++++++----------- Documentation/hwmon/da9055 | 20 ++++++++++++++----- 2 files changed, 44 insertions(+), 17 deletions(-) diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052 index 5bc51346b689..c1c0f1f08904 100644 --- a/Documentation/hwmon/da9052 +++ b/Documentation/hwmon/da9052 @@ -1,6 +1,12 @@ +Kernel driver da9052 +==================== + Supported chips: + * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs + Prefix: 'da9052' + Datasheet: Datasheet is not publicly available. Authors: David Dajun Chen @@ -15,17 +21,20 @@ different inputs. The track and hold circuit ensures stable input voltages at the input of the ADC during the conversion. The ADC is used to measure the following inputs: -Channel 0: VDDOUT - measurement of the system voltage -Channel 1: ICH - internal battery charger current measurement -Channel 2: TBAT - output from the battery NTC -Channel 3: VBAT - measurement of the battery voltage -Channel 4: ADC_IN4 - high impedance input (0 - 2.5V) -Channel 5: ADC_IN5 - high impedance input (0 - 2.5V) -Channel 6: ADC_IN6 - high impedance input (0 - 2.5V) -Channel 7: XY - TSI interface to measure the X and Y voltage of the touch - screen resistive potentiometers -Channel 8: Internal Tjunc. - sense (internal temp. sensor) -Channel 9: VBBAT - measurement of the backup battery voltage + +========= =================================================================== +Channel 0 VDDOUT - measurement of the system voltage +Channel 1 ICH - internal battery charger current measurement +Channel 2 TBAT - output from the battery NTC +Channel 3 VBAT - measurement of the battery voltage +Channel 4 ADC_IN4 - high impedance input (0 - 2.5V) +Channel 5 ADC_IN5 - high impedance input (0 - 2.5V) +Channel 6 ADC_IN6 - high impedance input (0 - 2.5V) +Channel 7 XY - TSI interface to measure the X and Y voltage of the touch + screen resistive potentiometers +Channel 8 Internal Tjunc. - sense (internal temp. sensor) +Channel 9 VBBAT - measurement of the backup battery voltage +========= =================================================================== By using sysfs attributes we can measure the system voltage VDDOUT, the battery charging current ICH, battery temperature TBAT, battery junction temperature @@ -37,12 +46,15 @@ Voltage Monitoring Voltages are sampled by a 10 bit ADC. The battery voltage is calculated as: + Milli volt = ((ADC value * 1000) / 512) + 2500 The backup battery voltage is calculated as: + Milli volt = (ADC value * 2500) / 512; The voltages on ADC channels 4, 5 and 6 are calculated as: + Milli volt = (ADC value * 2500) / 1023 Temperature Monitoring @@ -52,10 +64,15 @@ Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures are monitored by the ADC channels. The junction temperature is calculated: + Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 + The junction temperature attribute is supported by the driver. The battery temperature is calculated: - Degree Celsius = 1 / (t1 + 1/298)- 273 + + Degree Celsius = 1 / (t1 + 1/298) - 273 + where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) + Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively. diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055 index 855c3f536e00..beae271a3312 100644 --- a/Documentation/hwmon/da9055 +++ b/Documentation/hwmon/da9055 @@ -1,6 +1,11 @@ +Kernel driver da9055 +==================== + Supported chips: * Dialog Semiconductors DA9055 PMIC + Prefix: 'da9055' + Datasheet: Datasheet is not publicly available. Authors: David Dajun Chen @@ -15,11 +20,12 @@ different inputs. The track and hold circuit ensures stable input voltages at the input of the ADC during the conversion. The ADC is used to measure the following inputs: -Channel 0: VDDOUT - measurement of the system voltage -Channel 1: ADC_IN1 - high impedance input (0 - 2.5V) -Channel 2: ADC_IN2 - high impedance input (0 - 2.5V) -Channel 3: ADC_IN3 - high impedance input (0 - 2.5V) -Channel 4: Internal Tjunc. - sense (internal temp. sensor) + +- Channel 0: VDDOUT - measurement of the system voltage +- Channel 1: ADC_IN1 - high impedance input (0 - 2.5V) +- Channel 2: ADC_IN2 - high impedance input (0 - 2.5V) +- Channel 3: ADC_IN3 - high impedance input (0 - 2.5V) +- Channel 4: Internal Tjunc. - sense (internal temp. sensor) By using sysfs attributes we can measure the system voltage VDDOUT, chip junction temperature and auxiliary channels voltages. @@ -31,9 +37,11 @@ Voltages are sampled in a AUTO mode it can be manually sampled too and results are stored in a 10 bit ADC. The system voltage is calculated as: + Milli volt = ((ADC value * 1000) / 85) + 2500 The voltages on ADC channels 1, 2 and 3 are calculated as: + Milli volt = (ADC value * 1000) / 102 Temperature Monitoring @@ -43,5 +51,7 @@ Temperatures are sampled by a 10 bit ADC. Junction temperatures are monitored by the ADC channels. The junction temperature is calculated: + Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332 + The junction temperature attribute is supported by the driver. From patchwork Wed Apr 17 09:46:25 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905077 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0DEF317E0 for ; Wed, 17 Apr 2019 09:47:56 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E8F39288D0 for ; Wed, 17 Apr 2019 09:47:55 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id DD2792892E; Wed, 17 Apr 2019 09:47:55 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 04A8D288D2 for ; Wed, 17 Apr 2019 09:47:55 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731842AbfDQJri (ORCPT ); Wed, 17 Apr 2019 05:47:38 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:44984 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731707AbfDQJqj (ORCPT ); Wed, 17 Apr 2019 05:46:39 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=Yr6flntSohMfDY8JmTkJqWByC2k/5EEKrm+kjxu+UOk=; b=CLyHBzlxpSpgBRQgDQMosY4cMT E6Qm6CWKhuVcLZspob1t2E6iYktAS0rw38vbZISLlnTvQeo63r2L2dCYvrHJT1zJuOVpE9ZzM3zwQ erc6QZCvGk+MQG308Cs6PfAp6Mxh0fDFxOHi7aj7bwcanKgdb6oQ1ttPyAMY0A+D8Ob06ylmd4Vwh AUAiIIGyHSfLhC63m05UOz5JRQuqK7bqIV47PE8ydUfy+DOOxv7EWrxJlKro3Zro5Q3cZVFAQRhvc FdediaVz36Sq3VAKco40bY6qNCiCrUOrRrOJENyNdIixNd+i0TsUcqS8DW2wR5zA1t7/EpfeCSMRf 8IPF4EPg==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aL-Au; Wed, 17 Apr 2019 09:46:38 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003vP-77; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 17/21] docs: hwmon: k8temp, w83793: convert to ReST format Date: Wed, 17 Apr 2019 06:46:25 -0300 Message-Id: <84e5c302b2254138de560781b47ab50d835f78bf.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert k8temp and w83793 to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/k8temp | 17 +++-- Documentation/hwmon/w83793 | 123 ++++++++++++++++++++----------------- 2 files changed, 77 insertions(+), 63 deletions(-) diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp index 716dc24c7237..72da12aa17e5 100644 --- a/Documentation/hwmon/k8temp +++ b/Documentation/hwmon/k8temp @@ -2,12 +2,17 @@ Kernel driver k8temp ==================== Supported chips: + * AMD Athlon64/FX or Opteron CPUs + Prefix: 'k8temp' + Addresses scanned: PCI space + Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf Author: Rudolf Marek + Contact: Rudolf Marek Description @@ -27,10 +32,12 @@ implemented sensors. Mapping of /sys files is as follows: -temp1_input - temperature of Core 0 and "place" 0 -temp2_input - temperature of Core 0 and "place" 1 -temp3_input - temperature of Core 1 and "place" 0 -temp4_input - temperature of Core 1 and "place" 1 +============= =================================== +temp1_input temperature of Core 0 and "place" 0 +temp2_input temperature of Core 0 and "place" 1 +temp3_input temperature of Core 1 and "place" 0 +temp4_input temperature of Core 1 and "place" 1 +============= =================================== Temperatures are measured in degrees Celsius and measurement resolution is 1 degree C. It is expected that future CPU will have better resolution. The @@ -48,7 +55,7 @@ computed temperature called TControl, which must be lower than TControlMax. The relationship is following: -temp1_input - TjOffset*2 < TControlMax, + temp1_input - TjOffset*2 < TControlMax, TjOffset is not yet exported by the driver, TControlMax is usually 70 degrees C. The rule of the thumb -> CPU temperature should not cross diff --git a/Documentation/hwmon/w83793 b/Documentation/hwmon/w83793 index 6cc5f639b721..83bb40c48645 100644 --- a/Documentation/hwmon/w83793 +++ b/Documentation/hwmon/w83793 @@ -2,29 +2,34 @@ Kernel driver w83793 ==================== Supported chips: + * Winbond W83793G/W83793R + Prefix: 'w83793' + Addresses scanned: I2C 0x2c - 0x2f + Datasheet: Still not published Authors: - Yuan Mu (Winbond Electronics) - Rudolf Marek + - Yuan Mu (Winbond Electronics) + - Rudolf Marek Module parameters ----------------- * reset int - (default 0) - This parameter is not recommended, it will lose motherboard specific - settings. Use 'reset=1' to reset the chip when loading this module. + (default 0) + + This parameter is not recommended, it will lose motherboard specific + settings. Use 'reset=1' to reset the chip when loading this module. * force_subclients=bus,caddr,saddr1,saddr2 - This is used to force the i2c addresses for subclients of - a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b' - to force the subclients of chip 0x2f on bus 0 to i2c addresses - 0x4a and 0x4b. + This is used to force the i2c addresses for subclients of + a certain chip. Typical usage is `force_subclients=0,0x2f,0x4a,0x4b` + to force the subclients of chip 0x2f on bus 0 to i2c addresses + 0x4a and 0x4b. Description @@ -33,70 +38,72 @@ Description This driver implements support for Winbond W83793G/W83793R chips. * Exported features - This driver exports 10 voltage sensors, up to 12 fan tachometer inputs, - 6 remote temperatures, up to 8 sets of PWM fan controls, SmartFan - (automatic fan speed control) on all temperature/PWM combinations, 2 - sets of 6-pin CPU VID input. + This driver exports 10 voltage sensors, up to 12 fan tachometer inputs, + 6 remote temperatures, up to 8 sets of PWM fan controls, SmartFan + (automatic fan speed control) on all temperature/PWM combinations, 2 + sets of 6-pin CPU VID input. * Sensor resolutions - If your motherboard maker used the reference design, the resolution of - voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6, - 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution, - temp5-6 have a 1 degree Celsiis resolution. + If your motherboard maker used the reference design, the resolution of + voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6, + 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution, + temp5-6 have a 1 degree Celsiis resolution. * Temperature sensor types - Temp1-4 have 2 possible types. It can be read from (and written to) - temp[1-4]_type. - - If the value is 3, it starts monitoring using a remote termal diode - (default). - - If the value is 6, it starts monitoring using the temperature sensor - in Intel CPU and get result by PECI. - Temp5-6 can be connected to external thermistors (value of - temp[5-6]_type is 4). + Temp1-4 have 2 possible types. It can be read from (and written to) + temp[1-4]_type. + + - If the value is 3, it starts monitoring using a remote termal diode + (default). + - If the value is 6, it starts monitoring using the temperature sensor + in Intel CPU and get result by PECI. + + Temp5-6 can be connected to external thermistors (value of + temp[5-6]_type is 4). * Alarm mechanism - For voltage sensors, an alarm triggers if the measured value is below - the low voltage limit or over the high voltage limit. - For temperature sensors, an alarm triggers if the measured value goes - above the high temperature limit, and wears off only after the measured - value drops below the hysteresis value. - For fan sensors, an alarm triggers if the measured value is below the - low speed limit. + For voltage sensors, an alarm triggers if the measured value is below + the low voltage limit or over the high voltage limit. + For temperature sensors, an alarm triggers if the measured value goes + above the high temperature limit, and wears off only after the measured + value drops below the hysteresis value. + For fan sensors, an alarm triggers if the measured value is below the + low speed limit. * SmartFan/PWM control - If you want to set a pwm fan to manual mode, you just need to make sure it - is not controlled by any temp channel, for example, you want to set fan1 - to manual mode, you need to check the value of temp[1-6]_fan_map, make - sure bit 0 is cleared in the 6 values. And then set the pwm1 value to - control the fan. + If you want to set a pwm fan to manual mode, you just need to make sure it + is not controlled by any temp channel, for example, you want to set fan1 + to manual mode, you need to check the value of temp[1-6]_fan_map, make + sure bit 0 is cleared in the 6 values. And then set the pwm1 value to + control the fan. - Each temperature channel can control all the 8 PWM outputs (by setting the - corresponding bit in tempX_fan_map), you can set the temperature channel - mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3 - is the SmartFanII mode. Temperature channels will try to speed up or - slow down all controlled fans, this means one fan can receive different - PWM value requests from different temperature channels, but the chip - will always pick the safest (max) PWM value for each fan. + Each temperature channel can control all the 8 PWM outputs (by setting the + corresponding bit in tempX_fan_map), you can set the temperature channel + mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3 + is the SmartFanII mode. Temperature channels will try to speed up or + slow down all controlled fans, this means one fan can receive different + PWM value requests from different temperature channels, but the chip + will always pick the safest (max) PWM value for each fan. - In Thermal Cruise mode, the chip attempts to keep the temperature at a - predefined value, within a tolerance margin. So if tempX_input > - thermal_cruiseX + toleranceX, the chip will increase the PWM value, - if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease - the PWM value. If the temperature is within the tolerance range, the PWM - value is left unchanged. + In Thermal Cruise mode, the chip attempts to keep the temperature at a + predefined value, within a tolerance margin. So if tempX_input > + thermal_cruiseX + toleranceX, the chip will increase the PWM value, + if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease + the PWM value. If the temperature is within the tolerance range, the PWM + value is left unchanged. - SmartFanII works differently, you have to define up to 7 PWM, temperature - trip points, defining a PWM/temperature curve which the chip will follow. - While not fundamentally different from the Thermal Cruise mode, the - implementation is quite different, giving you a finer-grained control. + SmartFanII works differently, you have to define up to 7 PWM, temperature + trip points, defining a PWM/temperature curve which the chip will follow. + While not fundamentally different from the Thermal Cruise mode, the + implementation is quite different, giving you a finer-grained control. * Chassis - If the case open alarm triggers, it will stay in this state unless cleared - by writing 0 to the sysfs file "intrusion0_alarm". + If the case open alarm triggers, it will stay in this state unless cleared + by writing 0 to the sysfs file "intrusion0_alarm". * VID and VRM - The VRM version is detected automatically, don't modify the it unless you - *do* know the cpu VRM version and it's not properly detected. + The VRM version is detected automatically, don't modify the it unless you + *do* know the cpu VRM version and it's not properly detected. Notes From patchwork Wed Apr 17 09:46:26 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905069 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B031B13B5 for ; Wed, 17 Apr 2019 09:47:15 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 9539D288D0 for ; Wed, 17 Apr 2019 09:47:15 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 88D082892E; Wed, 17 Apr 2019 09:47:15 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 87BE0288D0 for ; Wed, 17 Apr 2019 09:47:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731645AbfDQJrK (ORCPT ); Wed, 17 Apr 2019 05:47:10 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:45054 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731711AbfDQJqk (ORCPT ); Wed, 17 Apr 2019 05:46:40 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc: To:From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=2c2mrLgCbp7PZnwNzgZtrnDsXGK2/GMKpO8QwC4Y9Og=; b=mytZi4OKcCQ1/Q4KCNBJNkNyNA tGHtw/WCjxBrWDBfl3rs2PDdbvIZoLTQMdqrzrfcnw6pE/FHwkDHoNW/RajIRwYbWAajWNprWrq4m 2dhgjBTvGScUB+BHqZZ9x2QoH+2M7RQeh2XoYZ5YgfCvNUAqhsnB81qyo+dnSVAU+567jZwyWR/0n iO1RiANwbCZ2VkNaXB51wSCgWxi7g85XU+eH6ISe5UK+UX/zCpX6/aaAM5LC/0LW4qwntcqicUhMX jOHsDx0SC0YrFmd0HWxUIxT1xrkxsONiDsr/FJbD4MaY1B8Ue1sUcTma5bdI3JwjSoi0Za1gL4Qv3 zgeg5zJA==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aM-C3; Wed, 17 Apr 2019 09:46:39 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003vU-83; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 18/21] docs: hwmon: pmbus files: convert to ReST format Date: Wed, 17 Apr 2019 06:46:26 -0300 Message-Id: <309c061320a1b2b6e2afa9a1f578827c98d76bbe.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert pmbus files to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/adm1275 | 26 ++++ Documentation/hwmon/ibm-cffps | 3 + Documentation/hwmon/ir35221 | 11 +- Documentation/hwmon/lm25066 | 30 ++++ Documentation/hwmon/ltc2978 | 267 +++++++++++++++++++++++++-------- Documentation/hwmon/ltc3815 | 12 +- Documentation/hwmon/max16064 | 15 +- Documentation/hwmon/max20751 | 7 + Documentation/hwmon/max31785 | 6 + Documentation/hwmon/max34440 | 88 +++++++++-- Documentation/hwmon/max8688 | 18 ++- Documentation/hwmon/pmbus | 90 +++++++---- Documentation/hwmon/pmbus-core | 173 ++++++++++++--------- Documentation/hwmon/tps40422 | 23 ++- Documentation/hwmon/ucd9000 | 31 ++-- Documentation/hwmon/ucd9200 | 42 ++++-- Documentation/hwmon/zl6100 | 69 ++++++++- 17 files changed, 684 insertions(+), 227 deletions(-) diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index 5e277b0d91ce..5c5860011d6e 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -2,29 +2,53 @@ Kernel driver adm1275 ===================== Supported chips: + * Analog Devices ADM1075 + Prefix: 'adm1075' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf + * Analog Devices ADM1272 + Prefix: 'adm1272' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf + * Analog Devices ADM1275 + Prefix: 'adm1275' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf + * Analog Devices ADM1276 + Prefix: 'adm1276' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf + * Analog Devices ADM1278 + Prefix: 'adm1278' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf + * Analog Devices ADM1293/ADM1294 + Prefix: 'adm1293', 'adm1294' + Addresses scanned: - + Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf Author: Guenter Roeck @@ -75,6 +99,7 @@ Sysfs entries The following attributes are supported. Limits are read-write, history reset attributes are write-only, all other attributes are read-only. +======================= ======================================================= inX_label "vin1" or "vout1" depending on chip variant and configuration. On ADM1075, ADM1293, and ADM1294, vout1 reports the voltage on the VAUX pin. @@ -120,3 +145,4 @@ temp1_reset_history Write any value to reset history. Temperature attributes are supported on ADM1272 and ADM1278. +======================= ======================================================= diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps index e05ecd8ecfcf..52e74e39463a 100644 --- a/Documentation/hwmon/ibm-cffps +++ b/Documentation/hwmon/ibm-cffps @@ -2,6 +2,7 @@ Kernel driver ibm-cffps ======================= Supported chips: + * IBM Common Form Factor power supply Author: Eddie James @@ -24,6 +25,7 @@ Sysfs entries The following attributes are supported: +======================= ====================================================== curr1_alarm Output current over-current alarm. curr1_input Measured output current in mA. curr1_label "iout1" @@ -52,3 +54,4 @@ temp2_alarm Secondary rectifier temp over-temperature alarm. temp2_input Measured secondary rectifier temp in millidegrees C. temp3_alarm ORing FET temperature over-temperature alarm. temp3_input Measured ORing FET temperature in millidegrees C. +======================= ====================================================== diff --git a/Documentation/hwmon/ir35221 b/Documentation/hwmon/ir35221 index 3e82f3d93f44..a83922e5ccb5 100644 --- a/Documentation/hwmon/ir35221 +++ b/Documentation/hwmon/ir35221 @@ -3,8 +3,11 @@ Kernel driver ir35221 Supported chips: * Infineon IR35221 + Prefix: 'ir35221' + Addresses scanned: - + Datasheet: Datasheet is not publicly available. Author: Samuel Mendoza-Jonas @@ -23,15 +26,16 @@ This driver does not probe for PMBus devices. You will have to instantiate devices explicitly. Example: the following commands will load the driver for an IR35221 -at address 0x70 on I2C bus #4: +at address 0x70 on I2C bus #4:: -# modprobe ir35221 -# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device + # modprobe ir35221 + # echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device Sysfs attributes ---------------- +======================= ======================================================= curr1_label "iin" curr1_input Measured input current curr1_max Maximum current @@ -85,3 +89,4 @@ temp[1-2]_highest Highest temperature temp[1-2]_lowest Lowest temperature temp[1-2]_max Maximum temperature temp[1-2]_max_alarm Chip temperature high alarm +======================= ======================================================= diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066 index 51b32aa203a8..60b7f2722931 100644 --- a/Documentation/hwmon/lm25066 +++ b/Documentation/hwmon/lm25066 @@ -2,34 +2,62 @@ Kernel driver lm25066 ===================== Supported chips: + * TI LM25056 + Prefix: 'lm25056' + Addresses scanned: - + Datasheets: + http://www.ti.com/lit/gpn/lm25056 + http://www.ti.com/lit/gpn/lm25056a + * National Semiconductor LM25066 + Prefix: 'lm25066' + Addresses scanned: - + Datasheets: + http://www.national.com/pf/LM/LM25066.html + http://www.national.com/pf/LM/LM25066A.html + * National Semiconductor LM5064 + Prefix: 'lm5064' + Addresses scanned: - + Datasheet: + http://www.national.com/pf/LM/LM5064.html + * National Semiconductor LM5066 + Prefix: 'lm5066' + Addresses scanned: - + Datasheet: + http://www.national.com/pf/LM/LM5066.html + * Texas Instruments LM5066I + Prefix: 'lm5066i' + Addresses scanned: - + Datasheet: + http://www.ti.com/product/LM5066I + Author: Guenter Roeck @@ -64,6 +92,7 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================= in1_label "vin" in1_input Measured input voltage. in1_average Average measured input voltage. @@ -105,3 +134,4 @@ temp1_max Maximum temperature. temp1_crit Critical high temperature. temp1_max_alarm Chip temperature high alarm. temp1_crit_alarm Chip temperature critical high alarm. +======================= ======================================================= diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978 index dfb2caa401d9..01a24fd6d5fe 100644 --- a/Documentation/hwmon/ltc2978 +++ b/Documentation/hwmon/ltc2978 @@ -2,85 +2,143 @@ Kernel driver ltc2978 ===================== Supported chips: + * Linear Technology LTC2974 + Prefix: 'ltc2974' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2974 + * Linear Technology LTC2975 + Prefix: 'ltc2975' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2975 + * Linear Technology LTC2977 + Prefix: 'ltc2977' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2977 + * Linear Technology LTC2978, LTC2978A + Prefix: 'ltc2978' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2978 - http://www.linear.com/product/ltc2978a + + http://www.linear.com/product/ltc2978a + * Linear Technology LTC2980 + Prefix: 'ltc2980' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc2980 + * Linear Technology LTC3880 + Prefix: 'ltc3880' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3880 + * Linear Technology LTC3882 + Prefix: 'ltc3882' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3882 + * Linear Technology LTC3883 + Prefix: 'ltc3883' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3883 + * Linear Technology LTC3886 + Prefix: 'ltc3886' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3886 + * Linear Technology LTC3887 + Prefix: 'ltc3887' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3887 + * Linear Technology LTM2987 + Prefix: 'ltm2987' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltm2987 + * Linear Technology LTM4675 + Prefix: 'ltm4675' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltm4675 + * Linear Technology LTM4676 + Prefix: 'ltm4676' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltm4676 + * Analog Devices LTM4686 + Prefix: 'ltm4686' + Addresses scanned: - + Datasheet: http://www.analog.com/ltm4686 + Author: Guenter Roeck Description ----------- -LTC2974 and LTC2975 are quad digital power supply managers. -LTC2978 is an octal power supply monitor. -LTC2977 is a pin compatible replacement for LTC2978. -LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977 -in a single die. The chip is instantiated and reported as two separate chips -on two different I2C bus addresses. -LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down -DC/DC controllers. -LTC3883 is a single phase step-down DC/DC controller. -LTM2987 is a 16-channel Power System Manager with two LTC2977 plus -additional components on a single die. The chip is instantiated and reported -as two separate chips on two different I2C bus addresses. -LTM4675 is a dual 9A or single 18A μModule regulator -LTM4676 is a dual 13A or single 26A uModule regulator. -LTM4686 is a dual 10A or single 20A uModule regulator. +- LTC2974 and LTC2975 are quad digital power supply managers. +- LTC2978 is an octal power supply monitor. +- LTC2977 is a pin compatible replacement for LTC2978. +- LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977 +- in a single die. The chip is instantiated and reported as two separate chips +- on two different I2C bus addresses. +- LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down +- DC/DC controllers. +- LTC3883 is a single phase step-down DC/DC controller. +- LTM2987 is a 16-channel Power System Manager with two LTC2977 plus +- additional components on a single die. The chip is instantiated and reported +- as two separate chips on two different I2C bus addresses. +- LTM4675 is a dual 9A or single 18A μModule regulator +- LTM4676 is a dual 13A or single 26A uModule regulator. +- LTM4686 is a dual 10A or single 20A uModule regulator. Usage Notes @@ -90,127 +148,208 @@ This driver does not probe for PMBus devices. You will have to instantiate devices explicitly. Example: the following commands will load the driver for an LTC2978 at address -0x60 on I2C bus #1: +0x60 on I2C bus #1:: -# modprobe ltc2978 -# echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device + # modprobe ltc2978 + # echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs attributes ---------------- +======================= ======================================================== in1_label "vin" + in1_input Measured input voltage. + in1_min Minimum input voltage. + in1_max Maximum input voltage. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. + in1_lcrit Critical minimum input voltage. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. + in1_crit Critical maximum input voltage. + in1_min_alarm Input voltage low alarm. + in1_max_alarm Input voltage high alarm. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. in1_lcrit_alarm Input voltage critical low alarm. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. in1_crit_alarm Input voltage critical high alarm. + in1_lowest Lowest input voltage. + LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and LTM2987 only. in1_highest Highest input voltage. + in1_reset_history Reset input voltage history. in[N]_label "vout[1-8]". - LTC2974, LTC2975: N=2-5 - LTC2977, LTC2980, LTM2987: N=2-9 - LTC2978: N=2-9 - LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676: - N=2-3 - LTC3883: N=2 + + - LTC2974, LTC2975: N=2-5 + - LTC2977, LTC2980, LTM2987: N=2-9 + - LTC2978: N=2-9 + - LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676: + N=2-3 + - LTC3883: N=2 + in[N]_input Measured output voltage. + in[N]_min Minimum output voltage. + in[N]_max Maximum output voltage. + in[N]_lcrit Critical minimum output voltage. + in[N]_crit Critical maximum output voltage. + in[N]_min_alarm Output voltage low alarm. + in[N]_max_alarm Output voltage high alarm. + in[N]_lcrit_alarm Output voltage critical low alarm. + in[N]_crit_alarm Output voltage critical high alarm. -in[N]_lowest Lowest output voltage. LTC2974, LTC2975, - and LTC2978 only. + +in[N]_lowest Lowest output voltage. + + + LTC2974, LTC2975,and LTC2978 only. + in[N]_highest Highest output voltage. + in[N]_reset_history Reset output voltage history. temp[N]_input Measured temperature. - On LTC2974 and LTC2975, temp[1-4] report external - temperatures, and temp5 reports the chip temperature. - On LTC2977, LTC2980, LTC2978, and LTM2987, only one - temperature measurement is supported and reports - the chip temperature. - On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676, - temp1 and temp2 report external temperatures, and temp3 - reports the chip temperature. - On LTC3883, temp1 reports an external temperature, - and temp2 reports the chip temperature. -temp[N]_min Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978, - and LTM2987 only. + + - On LTC2974 and LTC2975, temp[1-4] report external + temperatures, and temp5 reports the chip temperature. + - On LTC2977, LTC2980, LTC2978, and LTM2987, only one + temperature measurement is supported and reports + the chip temperature. + - On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676, + temp1 and temp2 report external temperatures, and + temp3 reports the chip temperature. + - On LTC3883, temp1 reports an external temperature, + and temp2 reports the chip temperature. + +temp[N]_min Mimimum temperature. + + LTC2974, LCT2977, LTM2980, LTC2978, and LTM2987 only. + temp[N]_max Maximum temperature. + temp[N]_lcrit Critical low temperature. + temp[N]_crit Critical high temperature. + temp[N]_min_alarm Temperature low alarm. + LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and LTM2987 only. + temp[N]_max_alarm Temperature high alarm. + + temp[N]_lcrit_alarm Temperature critical low alarm. + temp[N]_crit_alarm Temperature critical high alarm. + temp[N]_lowest Lowest measured temperature. - LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and - LTM2987 only. - Not supported for chip temperature sensor on LTC2974 and - LTC2975. -temp[N]_highest Highest measured temperature. Not supported for chip - temperature sensor on LTC2974 and LTC2975. -temp[N]_reset_history Reset temperature history. Not supported for chip - temperature sensor on LTC2974 and LTC2975. + + - LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and + LTM2987 only. + - Not supported for chip temperature sensor on LTC2974 + and LTC2975. + +temp[N]_highest Highest measured temperature. + + Not supported for chip temperature sensor on + LTC2974 and LTC2975. + +temp[N]_reset_history Reset temperature history. + + Not supported for chip temperature sensor on + LTC2974 and LTC2975. power1_label "pin". LTC3883 and LTC3886 only. + power1_input Measured input power. power[N]_label "pout[1-4]". - LTC2974, LTC2975: N=1-4 - LTC2977, LTC2980, LTM2987: Not supported - LTC2978: Not supported - LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: - N=1-2 - LTC3883: N=2 + + - LTC2974, LTC2975: N=1-4 + - LTC2977, LTC2980, LTM2987: Not supported + - LTC2978: Not supported + - LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: + N=1-2 + - LTC3883: N=2 + power[N]_input Measured output power. -curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675, +curr1_label "iin". + + LTC3880, LTC3883, LTC3886, LTC3887, LTM4675, and LTM4676 only. + curr1_input Measured input current. + curr1_max Maximum input current. + curr1_max_alarm Input current high alarm. -curr1_highest Highest input current. LTC3883 and LTC3886 only. -curr1_reset_history Reset input current history. LTC3883 and LTC3886 only. + +curr1_highest Highest input current. + + LTC3883 and LTC3886 only. + +curr1_reset_history Reset input current history. + + LTC3883 and LTC3886 only. curr[N]_label "iout[1-4]". - LTC2974, LTC2975: N=1-4 - LTC2977, LTC2980, LTM2987: not supported - LTC2978: not supported - LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: - N=2-3 - LTC3883: N=2 + + - LTC2974, LTC2975: N=1-4 + - LTC2977, LTC2980, LTM2987: not supported + - LTC2978: not supported + - LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676: + N=2-3 + - LTC3883: N=2 + curr[N]_input Measured output current. + curr[N]_max Maximum output current. + curr[N]_crit Critical high output current. -curr[N]_lcrit Critical low output current. LTC2974 and LTC2975 only. + +curr[N]_lcrit Critical low output current. + + LTC2974 and LTC2975 only. + curr[N]_max_alarm Output current high alarm. + curr[N]_crit_alarm Output current critical high alarm. + curr[N]_lcrit_alarm Output current critical low alarm. + LTC2974 and LTC2975 only. -curr[N]_lowest Lowest output current. LTC2974 and LTC2975 only. + +curr[N]_lowest Lowest output current. + + LTC2974 and LTC2975 only. + curr[N]_highest Highest output current. + curr[N]_reset_history Reset output current history. +======================= ======================================================== diff --git a/Documentation/hwmon/ltc3815 b/Documentation/hwmon/ltc3815 index eb7db2d13587..fb0135fc1925 100644 --- a/Documentation/hwmon/ltc3815 +++ b/Documentation/hwmon/ltc3815 @@ -2,9 +2,13 @@ Kernel driver ltc3815 ===================== Supported chips: + * Linear Technology LTC3815 + Prefix: 'ltc3815' + Addresses scanned: - + Datasheet: http://www.linear.com/product/ltc3815 Author: Guenter Roeck @@ -23,15 +27,16 @@ This driver does not probe for PMBus devices. You will have to instantiate devices explicitly. Example: the following commands will load the driver for an LTC3815 -at address 0x20 on I2C bus #1: +at address 0x20 on I2C bus #1:: -# modprobe ltc3815 -# echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device + # modprobe ltc3815 + # echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs attributes ---------------- +======================= ======================================================= in1_label "vin" in1_input Measured input voltage. in1_alarm Input voltage alarm. @@ -59,3 +64,4 @@ curr2_input Measured output current. curr2_alarm Output current alarm. curr2_highest Highest output current. curr2_reset_history Reset output current history. +======================= ======================================================= diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 index 265370f5cb82..61ec679dc477 100644 --- a/Documentation/hwmon/max16064 +++ b/Documentation/hwmon/max16064 @@ -2,9 +2,13 @@ Kernel driver max16064 ====================== Supported chips: + * Maxim MAX16064 + Prefix: 'max16064' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf Author: Guenter Roeck @@ -40,16 +44,20 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in[1-4]_label "vout[1-4]" in[1-4]_input Measured voltage. From READ_VOUT register. in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. in[1-4]_highest Historical maximum voltage. in[1-4]_reset_history Write any value to reset history. @@ -64,3 +72,4 @@ temp1_crit_alarm Chip temperature critical high alarm. Set by comparing status is set. temp1_highest Historical maximum temperature. temp1_reset_history Write any value to reset history. +======================= ======================================================== diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751 index f9fa25ebb521..d546695900ef 100644 --- a/Documentation/hwmon/max20751 +++ b/Documentation/hwmon/max20751 @@ -2,10 +2,15 @@ Kernel driver max20751 ====================== Supported chips: + * maxim MAX20751 + Prefix: 'max20751' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf + Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf Author: Guenter Roeck @@ -40,6 +45,7 @@ Sysfs entries The following attributes are supported. +======================= ======================================================= in1_label "vin1" in1_input Measured voltage. in1_min Minimum input voltage. @@ -75,3 +81,4 @@ temp1_crit_alarm Chip temperature critical high alarm. power1_input Output power. power1_label "pout1" +======================= ======================================================= diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785 index 270c5f865261..c8c6756d0ee1 100644 --- a/Documentation/hwmon/max31785 +++ b/Documentation/hwmon/max31785 @@ -2,9 +2,13 @@ Kernel driver max31785 ====================== Supported chips: + * Maxim MAX31785, MAX31785A + Prefix: 'max31785' or 'max31785a' + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf Author: Andrew Jeffery @@ -30,6 +34,7 @@ devices explicitly. Sysfs attributes ---------------- +======================= ======================================================= fan[1-4]_alarm Fan alarm. fan[1-4]_fault Fan fault. fan[1-8]_input Fan RPM. On the MAX31785A, inputs 5-8 correspond to the @@ -58,3 +63,4 @@ temp[1-11]_crit_alarm Chip temperature critical high alarm temp[1-11]_input Measured temperature temp[1-11]_max Maximum temperature temp[1-11]_max_alarm Chip temperature high alarm +======================= ======================================================= diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440 index b2de8fa49273..639838ef29fd 100644 --- a/Documentation/hwmon/max34440 +++ b/Documentation/hwmon/max34440 @@ -2,34 +2,63 @@ Kernel driver max34440 ====================== Supported chips: + * Maxim MAX34440 + Prefixes: 'max34440' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34440.pdf + * Maxim MAX34441 + PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller + Prefixes: 'max34441' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34441.pdf + * Maxim MAX34446 + PMBus Power-Supply Data Logger + Prefixes: 'max34446' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34446.pdf + * Maxim MAX34451 + PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer + Prefixes: 'max34451' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34451.pdf + * Maxim MAX34460 + PMBus 12-Channel Voltage Monitor & Sequencer + Prefix: 'max34460' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34460.pdf + * Maxim MAX34461 + PMBus 16-Channel Voltage Monitor & Sequencer + Prefix: 'max34461' + Addresses scanned: - + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf Author: Guenter Roeck @@ -77,42 +106,67 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +In +~~ + +======================= ======================================================= in[1-6]_label "vout[1-6]". in[1-6]_input Measured voltage. From READ_VOUT register. in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. in[1-6]_lowest Historical minimum voltage. in[1-6]_highest Historical maximum voltage. in[1-6]_reset_history Write any value to reset history. +======================= ======================================================= - MAX34446 only supports in[1-4]. +.. note:: MAX34446 only supports in[1-4]. +Curr +~~~~ + +======================= ======================================================== curr[1-6]_label "iout[1-6]". curr[1-6]_input Measured current. From READ_IOUT register. curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT + register. curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status. curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr[1-4]_average Historical average current (MAX34446/34451 only). curr[1-6]_highest Historical maximum current. curr[1-6]_reset_history Write any value to reset history. +======================= ======================================================== - in6 and curr6 attributes only exist for MAX34440. - MAX34446 only supports curr[1-4]. +.. note:: + - in6 and curr6 attributes only exist for MAX34440. + - MAX34446 only supports curr[1-4]. + +Power +~~~~~ + +======================= ======================================================== power[1,3]_label "pout[1,3]" power[1,3]_input Measured power. power[1,3]_average Historical average power. power[1,3]_highest Historical maximum power. +======================= ======================================================== - Power attributes only exist for MAX34446. +.. note:: Power attributes only exist for MAX34446. +Temp +~~~~ + +======================= ======================================================== temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register. temp1 is the chip's internal temperature. temp2..temp5 are remote I2C temperature sensors. For MAX34441, temp6 @@ -125,11 +179,17 @@ temp[1-8]_crit_alarm Temperature critical high alarm. temp[1-8]_average Historical average temperature (MAX34446 only). temp[1-8]_highest Historical maximum temperature. temp[1-8]_reset_history Write any value to reset history. +======================= ======================================================== - temp7 and temp8 attributes only exist for MAX34440. - MAX34446 only supports temp[1-3]. -MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on input pins) -and temp[1-5]. -MAX34460 supports attribute groups in[1-12] and temp[1-5]. -MAX34461 supports attribute groups in[1-16] and temp[1-5]. +.. note:: + - temp7 and temp8 attributes only exist for MAX34440. + - MAX34446 only supports temp[1-3]. + + +.. note:: + + - MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on + input pins) and temp[1-5]. + - MAX34460 supports attribute groups in[1-12] and temp[1-5]. + - MAX34461 supports attribute groups in[1-16] and temp[1-5]. diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 index ca233bec7a8a..43da139234c1 100644 --- a/Documentation/hwmon/max8688 +++ b/Documentation/hwmon/max8688 @@ -2,9 +2,13 @@ Kernel driver max8688 ===================== Supported chips: + * Maxim MAX8688 + Prefix: 'max8688' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf Author: Guenter Roeck @@ -40,23 +44,28 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in1_label "vout1" in1_input Measured voltage. From READ_VOUT register. in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. in1_highest Historical maximum voltage. in1_reset_history Write any value to reset history. curr1_label "iout1" curr1_input Measured current. From READ_IOUT register. curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT + register. curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register. curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr1_highest Historical maximum current. @@ -73,3 +82,4 @@ temp1_crit_alarm Chip temperature critical high alarm. Set by comparing status is set. temp1_highest Historical maximum temperature. temp1_reset_history Write any value to reset history. +======================= ======================================================== diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index dfd9c65996c0..abfb9dd4857d 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -1,42 +1,77 @@ Kernel driver pmbus -==================== +=================== Supported chips: + * Ericsson BMR453, BMR454 + Prefixes: 'bmr453', 'bmr454' + Addresses scanned: - + Datasheet: + http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395 + * ON Semiconductor ADP4000, NCP4200, NCP4208 + Prefixes: 'adp4000', 'ncp4200', 'ncp4208' + Addresses scanned: - + Datasheets: + http://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF + http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF + http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF + * Lineage Power + Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020' + Addresses scanned: - + Datasheets: + http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf + http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf + http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf + http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf + http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf + * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25 + Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25' + Addresses scanned: - + Datasheets: + http://www.ti.com/lit/gpn/tps40400 + http://www.ti.com/lit/gpn/tps544b20 + http://www.ti.com/lit/gpn/tps544b25 + http://www.ti.com/lit/gpn/tps544c20 + http://www.ti.com/lit/gpn/tps544c25 + * Generic PMBus devices + Prefix: 'pmbus' + Addresses scanned: - + Datasheet: n.a. + Author: Guenter Roeck @@ -62,9 +97,10 @@ supported by all chips), and since there is no well defined address range for PMBus devices. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC2978 at address 0x60 -on I2C bus #1: -$ modprobe pmbus -$ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe pmbus + $ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device Platform data support @@ -72,9 +108,9 @@ Platform data support Support for additional PMBus chips can be added by defining chip parameters in a new chip specific driver file. For example, (untested) code to add support for -Emerson DS1200 power modules might look as follows. +Emerson DS1200 power modules might look as follows:: -static struct pmbus_driver_info ds1200_info = { + static struct pmbus_driver_info ds1200_info = { .pages = 1, /* Note: All other sensors are in linear mode */ .direct[PSC_VOLTAGE_OUT] = true, @@ -95,45 +131,45 @@ static struct pmbus_driver_info ds1200_info = { | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12, -}; + }; -static int ds1200_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ + static int ds1200_probe(struct i2c_client *client, + const struct i2c_device_id *id) + { return pmbus_do_probe(client, id, &ds1200_info); -} + } -static int ds1200_remove(struct i2c_client *client) -{ + static int ds1200_remove(struct i2c_client *client) + { return pmbus_do_remove(client); -} + } -static const struct i2c_device_id ds1200_id[] = { + static const struct i2c_device_id ds1200_id[] = { {"ds1200", 0}, {} -}; + }; -MODULE_DEVICE_TABLE(i2c, ds1200_id); + MODULE_DEVICE_TABLE(i2c, ds1200_id); -/* This is the driver that will be inserted */ -static struct i2c_driver ds1200_driver = { + /* This is the driver that will be inserted */ + static struct i2c_driver ds1200_driver = { .driver = { .name = "ds1200", }, .probe = ds1200_probe, .remove = ds1200_remove, .id_table = ds1200_id, -}; + }; -static int __init ds1200_init(void) -{ + static int __init ds1200_init(void) + { return i2c_add_driver(&ds1200_driver); -} + } -static void __exit ds1200_exit(void) -{ + static void __exit ds1200_exit(void) + { i2c_del_driver(&ds1200_driver); -} + } Sysfs entries @@ -148,6 +184,7 @@ a given sysfs entry. The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== inX_input Measured voltage. From READ_VIN or READ_VOUT register. inX_min Minimum Voltage. From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register. @@ -214,3 +251,4 @@ tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing tempX_crit_alarm Chip temperature critical high alarm. Set by comparing READ_TEMPERATURE_X with OT_FAULT_LIMIT if TEMP_OT_FAULT status is set. +======================= ======================================================== diff --git a/Documentation/hwmon/pmbus-core b/Documentation/hwmon/pmbus-core index 8ed10e9ddfb5..92515c446fe3 100644 --- a/Documentation/hwmon/pmbus-core +++ b/Documentation/hwmon/pmbus-core @@ -1,3 +1,4 @@ +================================== PMBus core driver and internal API ================================== @@ -120,24 +121,24 @@ Specifically, it provides the following information. non-standard PMBus commands to standard commands, or to augment standard command return values with device specific information. - API functions - ------------- +API functions +============= - Functions provided by chip driver - --------------------------------- +Functions provided by chip driver +--------------------------------- - All functions return the command return value (read) or zero (write) if - successful. A return value of -ENODATA indicates that there is no manufacturer - specific command, but that a standard PMBus command may exist. Any other - negative return value indicates that the commands does not exist for this - chip, and that no attempt should be made to read or write the standard - command. +All functions return the command return value (read) or zero (write) if +successful. A return value of -ENODATA indicates that there is no manufacturer +specific command, but that a standard PMBus command may exist. Any other +negative return value indicates that the commands does not exist for this +chip, and that no attempt should be made to read or write the standard +command. - As mentioned above, an exception to this rule applies to virtual commands, - which _must_ be handled in driver specific code. See "Virtual PMBus Commands" - above for more details. +As mentioned above, an exception to this rule applies to virtual commands, +which *must* be handled in driver specific code. See "Virtual PMBus Commands" +above for more details. - Command execution in the core PMBus driver code is as follows. +Command execution in the core PMBus driver code is as follows:: if (chip_access_function) { status = chip_access_function(); @@ -148,128 +149,160 @@ Specifically, it provides the following information. return -EINVAL; return generic_access(); - Chip drivers may provide pointers to the following functions in struct - pmbus_driver_info. All functions are optional. +Chip drivers may provide pointers to the following functions in struct +pmbus_driver_info. All functions are optional. + +:: int (*read_byte_data)(struct i2c_client *client, int page, int reg); - Read byte from page , register . - may be -1, which means "current page". +Read byte from page , register . + may be -1, which means "current page". + + +:: int (*read_word_data)(struct i2c_client *client, int page, int reg); - Read word from page , register . +Read word from page , register . + +:: int (*write_word_data)(struct i2c_client *client, int page, int reg, - u16 word); + u16 word); - Write word to page , register . +Write word to page , register . + +:: int (*write_byte)(struct i2c_client *client, int page, u8 value); - Write byte to page , register . - may be -1, which means "current page". +Write byte to page , register . + may be -1, which means "current page". + +:: int (*identify)(struct i2c_client *client, struct pmbus_driver_info *info); - Determine supported PMBus functionality. This function is only necessary - if a chip driver supports multiple chips, and the chip functionality is not - pre-determined. It is currently only used by the generic pmbus driver - (pmbus.c). +Determine supported PMBus functionality. This function is only necessary +if a chip driver supports multiple chips, and the chip functionality is not +pre-determined. It is currently only used by the generic pmbus driver +(pmbus.c). - Functions exported by core driver - --------------------------------- +Functions exported by core driver +--------------------------------- - Chip drivers are expected to use the following functions to read or write - PMBus registers. Chip drivers may also use direct I2C commands. If direct I2C - commands are used, the chip driver code must not directly modify the current - page, since the selected page is cached in the core driver and the core driver - will assume that it is selected. Using pmbus_set_page() to select a new page - is mandatory. +Chip drivers are expected to use the following functions to read or write +PMBus registers. Chip drivers may also use direct I2C commands. If direct I2C +commands are used, the chip driver code must not directly modify the current +page, since the selected page is cached in the core driver and the core driver +will assume that it is selected. Using pmbus_set_page() to select a new page +is mandatory. + +:: int pmbus_set_page(struct i2c_client *client, u8 page); - Set PMBus page register to for subsequent commands. +Set PMBus page register to for subsequent commands. + +:: int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); - Read word data from , . Similar to i2c_smbus_read_word_data(), but - selects page first. +Read word data from , . Similar to i2c_smbus_read_word_data(), but +selects page first. + +:: int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word); - Write word data to , . Similar to i2c_smbus_write_word_data(), but - selects page first. +Write word data to , . Similar to i2c_smbus_write_word_data(), but +selects page first. + +:: int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg); - Read byte data from , . Similar to i2c_smbus_read_byte_data(), but - selects page first. may be -1, which means "current page". +Read byte data from , . Similar to i2c_smbus_read_byte_data(), but +selects page first. may be -1, which means "current page". + +:: int pmbus_write_byte(struct i2c_client *client, int page, u8 value); - Write byte data to , . Similar to i2c_smbus_write_byte(), but - selects page first. may be -1, which means "current page". +Write byte data to , . Similar to i2c_smbus_write_byte(), but +selects page first. may be -1, which means "current page". + +:: void pmbus_clear_faults(struct i2c_client *client); - Execute PMBus "Clear Fault" command on all chip pages. - This function calls the device specific write_byte function if defined. - Therefore, it must _not_ be called from that function. +Execute PMBus "Clear Fault" command on all chip pages. +This function calls the device specific write_byte function if defined. +Therefore, it must _not_ be called from that function. + +:: bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); - Check if byte register exists. Return true if the register exists, false - otherwise. - This function calls the device specific write_byte function if defined to - obtain the chip status. Therefore, it must _not_ be called from that function. +Check if byte register exists. Return true if the register exists, false +otherwise. +This function calls the device specific write_byte function if defined to +obtain the chip status. Therefore, it must _not_ be called from that function. + +:: bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); - Check if word register exists. Return true if the register exists, false - otherwise. - This function calls the device specific write_byte function if defined to - obtain the chip status. Therefore, it must _not_ be called from that function. +Check if word register exists. Return true if the register exists, false +otherwise. +This function calls the device specific write_byte function if defined to +obtain the chip status. Therefore, it must _not_ be called from that function. + +:: int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, - struct pmbus_driver_info *info); + struct pmbus_driver_info *info); - Execute probe function. Similar to standard probe function for other drivers, - with the pointer to struct pmbus_driver_info as additional argument. Calls - identify function if supported. Must only be called from device probe - function. +Execute probe function. Similar to standard probe function for other drivers, +with the pointer to struct pmbus_driver_info as additional argument. Calls +identify function if supported. Must only be called from device probe +function. + +:: void pmbus_do_remove(struct i2c_client *client); - Execute driver remove function. Similar to standard driver remove function. +Execute driver remove function. Similar to standard driver remove function. + +:: const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client); - Return pointer to struct pmbus_driver_info as passed to pmbus_do_probe(). +Return pointer to struct pmbus_driver_info as passed to pmbus_do_probe(). PMBus driver platform data ========================== PMBus platform data is defined in include/linux/pmbus.h. Platform data -currently only provides a flag field with a single bit used. +currently only provides a flag field with a single bit used:: -#define PMBUS_SKIP_STATUS_CHECK (1 << 0) + #define PMBUS_SKIP_STATUS_CHECK (1 << 0) -struct pmbus_platform_data { - u32 flags; /* Device specific flags */ -}; + struct pmbus_platform_data { + u32 flags; /* Device specific flags */ + }; Flags ----- PMBUS_SKIP_STATUS_CHECK - -During register detection, skip checking the status register for -communication or command errors. + During register detection, skip checking the status register for + communication or command errors. Some PMBus chips respond with valid data when trying to read an unsupported register. For such chips, checking the status register is mandatory when diff --git a/Documentation/hwmon/tps40422 b/Documentation/hwmon/tps40422 index 24bb0688d515..359751eb5ed4 100644 --- a/Documentation/hwmon/tps40422 +++ b/Documentation/hwmon/tps40422 @@ -2,9 +2,13 @@ Kernel driver tps40422 ====================== Supported chips: + * TI TPS40422 + Prefix: 'tps40422' + Addresses scanned: - + Datasheet: http://www.ti.com/lit/gpn/tps40422 Author: Zhu Laiwen @@ -39,6 +43,7 @@ Sysfs entries The following attributes are supported. +======================= ======================================================= in[1-2]_label "vout[1-2]" in[1-2]_input Measured voltage. From READ_VOUT register. in[1-2]_alarm voltage alarm. @@ -46,19 +51,23 @@ in[1-2]_alarm voltage alarm. curr[1-2]_input Measured current. From READ_IOUT register. curr[1-2]_label "iout[1-2]" curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT + register. curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT status. curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr2_alarm Current high alarm. From IOUT_OC_WARNING status. -temp1_input Measured temperature. From READ_TEMPERATURE_2 register on page 0. +temp1_input Measured temperature. From READ_TEMPERATURE_2 register + on page 0. temp1_max Maximum temperature. From OT_WARN_LIMIT register. temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. temp1_max_alarm Chip temperature high alarm. Set by comparing - READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if TEMP_OT_WARNING - status is set. + READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if + TEMP_OT_WARNING status is set. temp1_crit_alarm Chip temperature critical high alarm. Set by comparing - READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if TEMP_OT_FAULT - status is set. -temp2_input Measured temperature. From READ_TEMPERATURE_2 register on page 1. + READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if + TEMP_OT_FAULT status is set. +temp2_input Measured temperature. From READ_TEMPERATURE_2 register + on page 1. temp2_alarm Chip temperature alarm on page 1. +======================= ======================================================= diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000 index 262e713e60ff..d69061b7312c 100644 --- a/Documentation/hwmon/ucd9000 +++ b/Documentation/hwmon/ucd9000 @@ -2,15 +2,20 @@ Kernel driver ucd9000 ===================== Supported chips: + * TI UCD90120, UCD90124, UCD90160, UCD9090, and UCD90910 + Prefixes: 'ucd90120', 'ucd90124', 'ucd90160', 'ucd9090', 'ucd90910' + Addresses scanned: - + Datasheets: - http://focus.ti.com/lit/ds/symlink/ucd90120.pdf - http://focus.ti.com/lit/ds/symlink/ucd90124.pdf - http://focus.ti.com/lit/ds/symlink/ucd90160.pdf - http://focus.ti.com/lit/ds/symlink/ucd9090.pdf - http://focus.ti.com/lit/ds/symlink/ucd90910.pdf + + - http://focus.ti.com/lit/ds/symlink/ucd90120.pdf + - http://focus.ti.com/lit/ds/symlink/ucd90124.pdf + - http://focus.ti.com/lit/ds/symlink/ucd90160.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9090.pdf + - http://focus.ti.com/lit/ds/symlink/ucd90910.pdf Author: Guenter Roeck @@ -76,23 +81,28 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in[1-12]_label "vout[1-12]". in[1-12]_input Measured voltage. From READ_VOUT register. in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. curr[1-12]_label "iout[1-12]". curr[1-12]_input Measured current. From READ_IOUT register. curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT +curr[1-12]_lcrit Critical minimum output current. From + IOUT_UC_FAULT_LIMIT register. +curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. -curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status. curr[1-12]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. @@ -116,3 +126,4 @@ fan[1-4]_fault Fan fault. created only for enabled fans. Note that even though UCD90910 supports up to 10 fans, only up to four fans are currently supported. +======================= ======================================================== diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200 index 1e8060e631bd..44eda4a579b6 100644 --- a/Documentation/hwmon/ucd9200 +++ b/Documentation/hwmon/ucd9200 @@ -2,18 +2,23 @@ Kernel driver ucd9200 ===================== Supported chips: + * TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 + Prefixes: 'ucd9220', 'ucd9222', 'ucd9224', 'ucd9240', 'ucd9244', 'ucd9246', - 'ucd9248' + 'ucd9248' + Addresses scanned: - + Datasheets: - http://focus.ti.com/lit/ds/symlink/ucd9220.pdf - http://focus.ti.com/lit/ds/symlink/ucd9222.pdf - http://focus.ti.com/lit/ds/symlink/ucd9224.pdf - http://focus.ti.com/lit/ds/symlink/ucd9240.pdf - http://focus.ti.com/lit/ds/symlink/ucd9244.pdf - http://focus.ti.com/lit/ds/symlink/ucd9246.pdf - http://focus.ti.com/lit/ds/symlink/ucd9248.pdf + + - http://focus.ti.com/lit/ds/symlink/ucd9220.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9222.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9224.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9240.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9244.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9246.pdf + - http://focus.ti.com/lit/ds/symlink/ucd9248.pdf Author: Guenter Roeck @@ -52,12 +57,14 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in1_label "vin". in1_input Measured voltage. From READ_VIN register. in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register. in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register. in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register. -in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register. +in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT + register. in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status. in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status. in1_lcrit_alarm Voltage critical low alarm. From VIN_UV_FAULT status. @@ -68,11 +75,14 @@ in[2-5]_input Measured voltage. From READ_VOUT register. in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. curr1_label "iin". curr1_input Measured current. From READ_IIN register. @@ -80,9 +90,10 @@ curr1_input Measured current. From READ_IIN register. curr[2-5]_label "iout[1-4]". curr[2-5]_input Measured current. From READ_IOUT register. curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT +curr[2-5]_lcrit Critical minimum output current. From + IOUT_UC_FAULT_LIMIT register. +curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. -curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status. curr[2-5]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. @@ -97,7 +108,7 @@ power[2-5]_label "pout[1-4]" rails. See chip datasheets for details. temp[1-5]_input Measured temperatures. From READ_TEMPERATURE_1 and - READ_TEMPERATURE_2 registers. + READ_TEMPERATURE_2 registers. temp1 is the chip internal temperature. temp[2-5] are rail temperatures. temp[2-5] attributes are only created for enabled rails. See chip datasheets for @@ -110,3 +121,4 @@ temp[1-5]_crit_alarm Temperature critical high alarm. fan1_input Fan RPM. ucd9240 only. fan1_alarm Fan alarm. ucd9240 only. fan1_fault Fan fault. ucd9240 only. +======================= ======================================================== diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100 index 477a94b131ae..4029970bace4 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100 @@ -2,57 +2,106 @@ Kernel driver zl6100 ==================== Supported chips: + * Intersil / Zilker Labs ZL2004 + Prefix: 'zl2004' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn6847.pdf + * Intersil / Zilker Labs ZL2005 + Prefix: 'zl2005' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn6848.pdf + * Intersil / Zilker Labs ZL2006 + Prefix: 'zl2006' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn6850.pdf + * Intersil / Zilker Labs ZL2008 + Prefix: 'zl2008' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn6859.pdf + * Intersil / Zilker Labs ZL2105 + Prefix: 'zl2105' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn6851.pdf + * Intersil / Zilker Labs ZL2106 + Prefix: 'zl2106' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn6852.pdf + * Intersil / Zilker Labs ZL6100 + Prefix: 'zl6100' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn6876.pdf + * Intersil / Zilker Labs ZL6105 + Prefix: 'zl6105' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn6906.pdf + * Intersil / Zilker Labs ZL9101M + Prefix: 'zl9101' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn7669.pdf + * Intersil / Zilker Labs ZL9117M + Prefix: 'zl9117' + Addresses scanned: - + Datasheet: http://www.intersil.com/data/fn/fn7914.pdf + * Ericsson BMR450, BMR451 + Prefix: 'bmr450', 'bmr451' + Addresses scanned: - + Datasheet: + http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401 + * Ericsson BMR462, BMR463, BMR464 + Prefixes: 'bmr462', 'bmr463', 'bmr464' + Addresses scanned: - + Datasheet: -http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256 + http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256 Author: Guenter Roeck @@ -75,13 +124,15 @@ This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices for details. -WARNING: Do not access chip registers using the i2cdump command, and do not use -any of the i2ctools commands on a command register used to save and restore -configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by -this driver interpret any access to those command registers (including read -commands) as request to execute the command in question. Unless write accesses -to those registers are protected, this may result in power loss, board resets, -and/or Flash corruption. Worst case, your board may turn into a brick. +.. warning:: + + Do not access chip registers using the i2cdump command, and do not use + any of the i2ctools commands on a command register used to save and restore + configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by + this driver interpret any access to those command registers (including read + commands) as request to execute the command in question. Unless write accesses + to those registers are protected, this may result in power loss, board resets, + and/or Flash corruption. Worst case, your board may turn into a brick. Platform data support @@ -110,6 +161,7 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in1_label "vin" in1_input Measured input voltage. in1_min Minimum input voltage. @@ -158,3 +210,4 @@ temp[12]_min_alarm Chip temperature low alarm. temp[12]_max_alarm Chip temperature high alarm. temp[12]_lcrit_alarm Chip temperature critical low alarm. temp[12]_crit_alarm Chip temperature critical high alarm. +======================= ======================================================== From patchwork Wed Apr 17 09:46:27 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905071 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 780EA13B5 for ; Wed, 17 Apr 2019 09:47:25 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5C4F7288D0 for ; Wed, 17 Apr 2019 09:47:25 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 507F52892E; Wed, 17 Apr 2019 09:47:25 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 77751288D0 for ; Wed, 17 Apr 2019 09:47:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729039AbfDQJrW (ORCPT ); Wed, 17 Apr 2019 05:47:22 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:45022 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731709AbfDQJqk (ORCPT ); Wed, 17 Apr 2019 05:46:40 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Reply-To:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=QXSBflgdICDavMt3qJi4slib9fkF1Sog++iPiX5VTQo=; b=O/w4x6Q8au14g5cKUIQjla8Dp8 gsetDYfDJVEu89F7FuAvZQZO6EyS6eT3y5SQ+IPuBTSIVzObupmPFgX+YGkKRW+yViYUFFZhrgzA8 KDGedKDih4YOhIASOsa5Ya/AzpbX478DaX0AF6NsKQGdKPfEWmXQvFMuStgx49iRNvVJxJmFYS3TQ be9z5NALzKddrs9aRZYY/oFHEMcOr5MCCEhiJ9zI9RmkipMfOfUUIQjLUiiB6/xjVL+6oZJ1xzwP9 kl7z7ikdAHgUTpsShPd7/+a8aZ0VdiTRz6JvgQpVFqWAlh2Mfqq9rNxYSS2XfRkBAJ5KVe/69vVIk 1utkDuJA==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9K-0000aN-FS; Wed, 17 Apr 2019 09:46:39 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003vZ-8w; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , linux-hwmon@vger.kernel.org Subject: [PATCH v3 19/21] docs: hwmon: misc files: convert to ReST format Date: Wed, 17 Apr 2019 06:46:27 -0300 Message-Id: <7e7949769de565332b176ad68ca3e7ad92260e9d.1555494108.git.mchehab+samsung@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert other files maintained by Guenter to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab --- Documentation/hwmon/ina209 | 18 ++++-- Documentation/hwmon/ina2xx | 39 +++++++++--- Documentation/hwmon/jc42 | 55 ++++++++++++++++- Documentation/hwmon/lm95234 | 11 +++- Documentation/hwmon/ltc4261 | 16 +++-- Documentation/hwmon/max16065 | 24 +++++++- Documentation/hwmon/max6697 | 33 ++++++++++ Documentation/hwmon/nct6775 | 114 ++++++++++++++++++++++++++++------- Documentation/hwmon/smm665 | 42 +++++++++++-- Documentation/hwmon/tmp401 | 30 ++++++++- 10 files changed, 328 insertions(+), 54 deletions(-) diff --git a/Documentation/hwmon/ina209 b/Documentation/hwmon/ina209 index 672501de4509..64322075a145 100644 --- a/Documentation/hwmon/ina209 +++ b/Documentation/hwmon/ina209 @@ -1,16 +1,21 @@ Kernel driver ina209 -===================== +==================== Supported chips: + * Burr-Brown / Texas Instruments INA209 + Prefix: 'ina209' + Addresses scanned: - + Datasheet: - http://www.ti.com/lit/gpn/ina209 + http://www.ti.com/lit/gpn/ina209 -Author: Paul Hays -Author: Ira W. Snyder -Author: Guenter Roeck +Author: + - Paul Hays + - Ira W. Snyder + - Guenter Roeck Description @@ -31,7 +36,7 @@ the I2C bus. See the datasheet for details. This tries to expose most monitoring features of the hardware via sysfs. It does not support every feature of this chip. - +======================= ======================================================= in0_input shunt voltage (mV) in0_input_highest shunt voltage historical maximum reading (mV) in0_input_lowest shunt voltage historical minimum reading (mV) @@ -70,6 +75,7 @@ curr1_input current measurement (mA) update_interval data conversion time; affects number of samples used to average results for shunt and bus voltages. +======================= ======================================================= General Remarks --------------- diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index 0f36c021192d..95badf9c396f 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -2,35 +2,56 @@ Kernel driver ina2xx ==================== Supported chips: + * Texas Instruments INA219 + + Prefix: 'ina219' Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ * Texas Instruments INA220 + Prefix: 'ina220' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ * Texas Instruments INA226 + Prefix: 'ina226' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ * Texas Instruments INA230 + Prefix: 'ina230' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ * Texas Instruments INA231 + Prefix: 'ina231' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/ + + http://www.ti.com/ Author: Lothar Felten @@ -64,16 +85,20 @@ lower limit of the update_interval is 2 ms, the upper limit is 2253 ms. The actual programmed interval may vary from the desired value. General sysfs entries -------------- +--------------------- +======================= =============================== in0_input Shunt voltage(mV) channel in1_input Bus voltage(mV) channel curr1_input Current(mA) measurement channel power1_input Power(uW) measurement channel shunt_resistor Shunt resistance(uOhm) channel +======================= =============================== Sysfs entries for ina226, ina230 and ina231 only -------------- +------------------------------------------------ +======================= ==================================================== update_interval data conversion time; affects number of samples used to average results for shunt and bus voltages. +======================= ==================================================== diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42 index b4b671f22453..5b14b49bb6f7 100644 --- a/Documentation/hwmon/jc42 +++ b/Documentation/hwmon/jc42 @@ -2,53 +2,100 @@ Kernel driver jc42 ================== Supported chips: + * Analog Devices ADT7408 + Datasheets: + http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf + * Atmel AT30TS00, AT30TS002A/B, AT30TSE004A + Datasheets: + http://www.atmel.com/Images/doc8585.pdf + http://www.atmel.com/Images/doc8711.pdf + http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf + http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf + * IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2, + TS3001GB2 + Datasheets: + Available from IDT web site + * Maxim MAX6604 + Datasheets: + http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf + * Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843 + Datasheets: + http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf + http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf + * NXP Semiconductors SE97, SE97B, SE98, SE98A + Datasheets: + http://www.nxp.com/documents/data_sheet/SE97.pdf + http://www.nxp.com/documents/data_sheet/SE97B.pdf + http://www.nxp.com/documents/data_sheet/SE98.pdf + http://www.nxp.com/documents/data_sheet/SE98A.pdf + * ON Semiconductor CAT34TS02, CAT6095 + Datasheet: + http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF + http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF + * ST Microelectronics STTS424, STTS424E02, STTS2002, STTS2004, STTS3000 + Datasheets: + http://www.st.com/web/en/resource/technical/document/datasheet/CD00157556.pdf + http://www.st.com/web/en/resource/technical/document/datasheet/CD00157558.pdf + http://www.st.com/web/en/resource/technical/document/datasheet/CD00266638.pdf + http://www.st.com/web/en/resource/technical/document/datasheet/CD00225278.pdf + http://www.st.com/web/en/resource/technical/document/datasheet/DM00076709.pdf + * JEDEC JC 42.4 compliant temperature sensor chips + Datasheet: + http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf + Common for all chips: + Prefix: 'jc42' + Addresses scanned: I2C 0x18 - 0x1f Author: @@ -67,10 +114,10 @@ The driver auto-detects the chips listed above, but can be manually instantiated to support other JC 42.4 compliant chips. Example: the following will load the driver for a generic JC 42.4 compliant -temperature sensor at address 0x18 on I2C bus #1: +temperature sensor at address 0x18 on I2C bus #1:: -# modprobe jc42 -# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device + # modprobe jc42 + # echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum, and critical temperature can be configured. There are alarms for high, low, @@ -90,6 +137,7 @@ cannot be changed. Sysfs entries ------------- +======================= =========================================== temp1_input Temperature (RO) temp1_min Minimum temperature (RO or RW) temp1_max Maximum temperature (RO or RW) @@ -101,3 +149,4 @@ temp1_max_hyst Maximum hysteresis temperature (RO) temp1_min_alarm Temperature low alarm temp1_max_alarm Temperature high alarm temp1_crit_alarm Temperature critical alarm +======================= =========================================== diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234 index 32b777ef224c..e4c14bea5efd 100644 --- a/Documentation/hwmon/lm95234 +++ b/Documentation/hwmon/lm95234 @@ -2,15 +2,22 @@ Kernel driver lm95234 ===================== Supported chips: + * National Semiconductor / Texas Instruments LM95233 + Addresses scanned: I2C 0x18, 0x2a, 0x2b + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/product/lm95233 + + http://www.ti.com/product/lm95233 + * National Semiconductor / Texas Instruments LM95234 + Addresses scanned: I2C 0x18, 0x4d, 0x4e + Datasheet: Publicly available at the Texas Instruments website - http://www.ti.com/product/lm95234 + http://www.ti.com/product/lm95234 Author: Guenter Roeck diff --git a/Documentation/hwmon/ltc4261 b/Documentation/hwmon/ltc4261 index 9378a75c6134..c80233f8082e 100644 --- a/Documentation/hwmon/ltc4261 +++ b/Documentation/hwmon/ltc4261 @@ -2,11 +2,16 @@ Kernel driver ltc4261 ===================== Supported chips: + * Linear Technology LTC4261 + Prefix: 'ltc4261' + Addresses scanned: - + Datasheet: - http://cds.linear.com/docs/Datasheet/42612fb.pdf + + http://cds.linear.com/docs/Datasheet/42612fb.pdf Author: Guenter Roeck @@ -26,9 +31,10 @@ which can be safely used to identify the chip. You will have to instantiate the devices explicitly. Example: the following will load the driver for an LTC4261 at address 0x10 -on I2C bus #1: -$ modprobe ltc4261 -$ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe ltc4261 + $ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -51,6 +57,7 @@ the proximity of the ADIN2 pin to the OV pin. ADIN2 is, however, not available on all chip variants. To ensure that the alarm condition is reported to the user, report it with both voltage sensors. +======================= ============================= in1_input ADIN2 voltage (mV) in1_min_alarm ADIN/ADIN2 Undervoltage alarm in1_max_alarm ADIN/ADIN2 Overvoltage alarm @@ -61,3 +68,4 @@ in2_max_alarm ADIN/ADIN2 Overvoltage alarm curr1_input SENSE current (mA) curr1_alarm SENSE overcurrent alarm +======================= ============================= diff --git a/Documentation/hwmon/max16065 b/Documentation/hwmon/max16065 index 208a29e43010..fa5c852a178c 100644 --- a/Documentation/hwmon/max16065 +++ b/Documentation/hwmon/max16065 @@ -1,29 +1,49 @@ Kernel driver max16065 ====================== + Supported chips: + * Maxim MAX16065, MAX16066 + Prefixes: 'max16065', 'max16066' + Addresses scanned: - + Datasheet: + http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf + * Maxim MAX16067 + Prefix: 'max16067' + Addresses scanned: - + Datasheet: + http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf + * Maxim MAX16068 + Prefix: 'max16068' + Addresses scanned: - + Datasheet: + http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf + * Maxim MAX16070/MAX16071 + Prefixes: 'max16070', 'max16071' + Addresses scanned: - + Datasheet: + http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf - Author: Guenter Roeck @@ -73,6 +93,7 @@ turn into a brick. Sysfs entries ------------- +======================= ======================================================== in[0-11]_input Input voltage measurements. in12_input Voltage on CSP (Current Sense Positive) pin. @@ -103,3 +124,4 @@ curr1_input Current sense input; only if the chip supports current curr1_alarm Overcurrent alarm; only if the chip supports current sensing and if current sensing is enabled. +======================= ======================================================== diff --git a/Documentation/hwmon/max6697 b/Documentation/hwmon/max6697 index 6594177ededa..ffc5a7d8d33b 100644 --- a/Documentation/hwmon/max6697 +++ b/Documentation/hwmon/max6697 @@ -2,38 +2,69 @@ Kernel driver max6697 ===================== Supported chips: + * Maxim MAX6581 + Prefix: 'max6581' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6581.pdf + * Maxim MAX6602 + Prefix: 'max6602' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6602.pdf + * Maxim MAX6622 + Prefix: 'max6622' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6622.pdf + * Maxim MAX6636 + Prefix: 'max6636' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6636.pdf + * Maxim MAX6689 + Prefix: 'max6689' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6689.pdf + * Maxim MAX6693 + Prefix: 'max6693' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6693.pdf + * Maxim MAX6694 + Prefix: 'max6694' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6694.pdf + * Maxim MAX6697 + Prefix: 'max6697' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6697.pdf + * Maxim MAX6698 + Prefix: 'max6698' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6698.pdf + * Maxim MAX6699 + Prefix: 'max6699' + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6699.pdf Author: + Guenter Roeck Description @@ -50,9 +81,11 @@ The driver provides the following sysfs attributes. temp1 is the local (chip) temperature, temp[2..n] are remote temperatures. The actually supported per-channel attributes are chip type and channel dependent. +================ == ========================================================== tempX_input RO temperature tempX_max RW temperature maximum threshold tempX_max_alarm RO temperature maximum threshold alarm tempX_crit RW temperature critical threshold tempX_crit_alarm RO temperature critical threshold alarm tempX_fault RO temperature diode fault (remote sensors only) +================ == ========================================================== diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775 index bd59834d310f..1d0315c40952 100644 --- a/Documentation/hwmon/nct6775 +++ b/Documentation/hwmon/nct6775 @@ -1,52 +1,90 @@ -Note -==== - -This driver supersedes the NCT6775F and NCT6776F support in the W83627EHF -driver. - Kernel driver NCT6775 ===================== +.. note:: + + This driver supersedes the NCT6775F and NCT6776F support in the W83627EHF + driver. + Supported chips: + * Nuvoton NCT6102D/NCT6104D/NCT6106D + Prefix: 'nct6106' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from the Nuvoton web site + * Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I + Prefix: 'nct6775' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT5573D/NCT5577D/NCT6776D/NCT6776F + Prefix: 'nct6776' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT5532D/NCT6779D + Prefix: 'nct6779' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6791D + Prefix: 'nct6791' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6792D + Prefix: 'nct6792' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6793D + Prefix: 'nct6793' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6795D + Prefix: 'nct6795' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + * Nuvoton NCT6796D + Prefix: 'nct6796' + Addresses scanned: ISA address retrieved from Super I/O registers + Datasheet: Available from Nuvoton upon request + + Authors: - Guenter Roeck + + Guenter Roeck Description ----------- @@ -96,10 +134,14 @@ The mode works for fan1-fan5. sysfs attributes ---------------- -pwm[1-7] - this file stores PWM duty cycle or DC value (fan speed) in range: +pwm[1-7] + - this file stores PWM duty cycle or DC value (fan speed) in range: + 0 (lowest speed) to 255 (full) -pwm[1-7]_enable - this file controls mode of fan/temperature control: +pwm[1-7]_enable + - this file controls mode of fan/temperature control: + * 0 Fan control disabled (fans set to maximum speed) * 1 Manual mode, write to pwm[0-5] any value 0-255 * 2 "Thermal Cruise" mode @@ -107,15 +149,19 @@ pwm[1-7]_enable - this file controls mode of fan/temperature control: * 4 "Smart Fan III" mode (NCT6775F only) * 5 "Smart Fan IV" mode -pwm[1-7]_mode - controls if output is PWM or DC level - * 0 DC output - * 1 PWM output +pwm[1-7]_mode + - controls if output is PWM or DC level + + * 0 DC output + * 1 PWM output Common fan control attributes ----------------------------- -pwm[1-7]_temp_sel Temperature source. Value is temperature sensor index. +pwm[1-7]_temp_sel + Temperature source. Value is temperature sensor index. For example, select '1' for temp1_input. + pwm[1-7]_weight_temp_sel Secondary temperature source. Value is temperature sensor index. For example, select '1' for temp1_input. @@ -126,13 +172,16 @@ following attributes. pwm[1-7]_weight_duty_step Duty step size. + pwm[1-7]_weight_temp_step Temperature step size. With each step over temp_step_base, the value of weight_duty_step is added to the current pwm value. + pwm[1-7]_weight_temp_step_base Temperature at which secondary temperature control kicks in. + pwm[1-7]_weight_temp_step_tol Temperature step tolerance. @@ -141,24 +190,35 @@ Thermal Cruise mode (2) If the temperature is in the range defined by: -pwm[1-7]_target_temp Target temperature, unit millidegree Celsius +pwm[1-7]_target_temp + Target temperature, unit millidegree Celsius (range 0 - 127000) + pwm[1-7]_temp_tolerance Target temperature tolerance, unit millidegree Celsius -there are no changes to fan speed. Once the temperature leaves the interval, fan +There are no changes to fan speed. Once the temperature leaves the interval, fan speed increases (if temperature is higher that desired) or decreases (if temperature is lower than desired), using the following limits and time intervals. -pwm[1-7]_start fan pwm start value (range 1 - 255), to start fan +pwm[1-7]_start + fan pwm start value (range 1 - 255), to start fan when the temperature is above defined range. -pwm[1-7]_floor lowest fan pwm (range 0 - 255) if temperature is below + +pwm[1-7]_floor + lowest fan pwm (range 0 - 255) if temperature is below the defined range. If set to 0, the fan is expected to stop if the temperature is below the defined range. -pwm[1-7]_step_up_time milliseconds before fan speed is increased -pwm[1-7]_step_down_time milliseconds before fan speed is decreased -pwm[1-7]_stop_time how many milliseconds must elapse to switch + +pwm[1-7]_step_up_time + milliseconds before fan speed is increased + +pwm[1-7]_step_down_time + milliseconds before fan speed is decreased + +pwm[1-7]_stop_time + how many milliseconds must elapse to switch corresponding fan off (when the temperature was below defined range). @@ -167,7 +227,9 @@ Speed Cruise mode (3) This modes tries to keep the fan speed constant. -fan[1-7]_target Target fan speed +fan[1-7]_target + Target fan speed + fan[1-7]_tolerance Target speed tolerance @@ -188,16 +250,22 @@ critical temperature mode, in which the fans should run at full speed. pwm[1-7]_auto_point[1-7]_pwm pwm value to be set if temperature reaches matching temperature range. + pwm[1-7]_auto_point[1-7]_temp Temperature over which the matching pwm is enabled. + pwm[1-7]_temp_tolerance Temperature tolerance, unit millidegree Celsius + pwm[1-7]_crit_temp_tolerance Temperature tolerance for critical temperature, unit millidegree Celsius -pwm[1-7]_step_up_time milliseconds before fan speed is increased -pwm[1-7]_step_down_time milliseconds before fan speed is decreased +pwm[1-7]_step_up_time + milliseconds before fan speed is increased + +pwm[1-7]_step_down_time + milliseconds before fan speed is decreased Usage Notes ----------- diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665 index a341eeedab75..a0e27f62b57b 100644 --- a/Documentation/hwmon/smm665 +++ b/Documentation/hwmon/smm665 @@ -2,31 +2,57 @@ Kernel driver smm665 ==================== Supported chips: + * Summit Microelectronics SMM465 + Prefix: 'smm465' + Addresses scanned: - + Datasheet: + http://www.summitmicro.com/prod_select/summary/SMM465/SMM465DS.pdf + * Summit Microelectronics SMM665, SMM665B + Prefix: 'smm665' + Addresses scanned: - + Datasheet: + http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf + * Summit Microelectronics SMM665C + Prefix: 'smm665c' + Addresses scanned: - + Datasheet: + http://www.summitmicro.com/prod_select/summary/SMM665C/SMM665C_2125.pdf + * Summit Microelectronics SMM764 + Prefix: 'smm764' + Addresses scanned: - + Datasheet: + http://www.summitmicro.com/prod_select/summary/SMM764/SMM764_2098.pdf + * Summit Microelectronics SMM766, SMM766B + Prefix: 'smm766' + Addresses scanned: - + Datasheets: + http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf + http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf Author: Guenter Roeck @@ -36,9 +62,10 @@ Module Parameters ----------------- * vref: int - Default: 1250 (mV) - Reference voltage on VREF_ADC pin in mV. It should not be necessary to set - this parameter unless a non-default reference voltage is used. + Default: 1250 (mV) + + Reference voltage on VREF_ADC pin in mV. It should not be necessary to set + this parameter unless a non-default reference voltage is used. Description @@ -64,9 +91,10 @@ the devices explicitly. When instantiating the device, you have to specify its configuration register address. Example: the following will load the driver for an SMM665 at address 0x57 -on I2C bus #1: -$ modprobe smm665 -$ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device +on I2C bus #1:: + + $ modprobe smm665 + $ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device Sysfs entries @@ -84,6 +112,7 @@ max otherwise. For details please see the SMM665 datasheet. For SMM465 and SMM764, values for Channel E and F are reported but undefined. +======================= ======================================================= in1_input 12V input voltage (mV) in2_input 3.3V (VDD) input voltage (mV) in3_input Channel A voltage (mV) @@ -155,3 +184,4 @@ temp1_min Mimimum chip temperature temp1_max Maximum chip temperature temp1_crit Critical chip temperature temp1_crit_alarm Temperature critical alarm +======================= ======================================================= diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401 index 2d9ca42213cf..bd865bbdb38d 100644 --- a/Documentation/hwmon/tmp401 +++ b/Documentation/hwmon/tmp401 @@ -2,33 +2,59 @@ Kernel driver tmp401 ==================== Supported chips: + * Texas Instruments TMP401 + Prefix: 'tmp401' + Addresses scanned: I2C 0x4c + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp401.html + * Texas Instruments TMP411 + Prefix: 'tmp411' + Addresses scanned: I2C 0x4c, 0x4d, 0x4e + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp411.html + * Texas Instruments TMP431 + Prefix: 'tmp431' + Addresses scanned: I2C 0x4c, 0x4d + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp431.html + * Texas Instruments TMP432 + Prefix: 'tmp432' + Addresses scanned: I2C 0x4c, 0x4d + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html + * Texas Instruments TMP435 + Prefix: 'tmp435' + Addresses scanned: I2C 0x48 - 0x4f + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html + * Texas Instruments TMP461 + Prefix: 'tmp461' + Datasheet: http://www.ti.com/product/tmp461 + + Authors: - Hans de Goede - Andre Prendel + + - Hans de Goede + - Andre Prendel Description ----------- From patchwork Wed Apr 17 09:46:29 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Mauro Carvalho Chehab X-Patchwork-Id: 10905063 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 3E36A13B5 for ; Wed, 17 Apr 2019 09:47:10 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1ACF2288D0 for ; Wed, 17 Apr 2019 09:47:10 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 0A2EA28984; Wed, 17 Apr 2019 09:47:10 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.7 required=2.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5E5D2288D0 for ; Wed, 17 Apr 2019 09:47:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730926AbfDQJq5 (ORCPT ); Wed, 17 Apr 2019 05:46:57 -0400 Received: from bombadil.infradead.org ([198.137.202.133]:45398 "EHLO bombadil.infradead.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1731645AbfDQJqn (ORCPT ); Wed, 17 Apr 2019 05:46:43 -0400 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc: To:From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help: List-Unsubscribe:List-Subscribe:List-Post:List-Owner:List-Archive; bh=vxhWXetAzQwxpq3qaW+OrSd5FSTUMJuYuBdRvkU1jYs=; b=rA+8pMmFdPBmZZhlsqZRWJ8+1g T3upYAa8ThDyk06AyHmFQ4K5CVF/v9WcIstmtRXNlp54jBltTosG9JzjtInFdDXl4HzoSvOLNnH4G macry0HmvHZSXZ3fDRk0temcqF6PNo5Dt1kHp7AwQbWKDgYoeuqz4iL+YMSIiTGrAMsF0sciGzetv umO268l0V633z1Vi7wFYcm1hSj4DDrGcVvozv++PxURYa/JwymRlbFFARyaCEmxjDyhMp3C2Urqh3 QlvoEJAR0K0Q44upqoYICwhF19vPrrUXG6fJGSubD9I9iaaPGfsMw5S9LlQOavHkSb+KZs8m87pQn 1s0/1brw==; Received: from 177.132.233.55.dynamic.adsl.gvt.net.br ([177.132.233.55] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.90_1 #2 (Red Hat Linux)) id 1hGh9G-0000ab-KE; Wed, 17 Apr 2019 09:46:35 +0000 Received: from mchehab by bombadil.infradead.org with local (Exim 4.92) (envelope-from ) id 1hGh9D-0003vl-BY; Wed, 17 Apr 2019 06:46:31 -0300 From: Mauro Carvalho Chehab To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Jonathan Corbet , Jean Delvare , Guenter Roeck , Rob Herring , Mark Rutland , Dirk Eibach , George Joseph , Joel Stanley , Andrew Jeffery , Fenghua Yu , Support Opensource , Juerg Haefliger , Steve Glendinning , Huang Rui , Benjamin Herrenschmidt , Paul Mackerras , Michael Ellerman , Clemens Ladisch , Rudolf Marek , Andreas Werner , Jim Cromie , Kamil Debski , Bartlomiej Zolnierkiewicz , Hans de Goede , Liviu Dudau , Sudeep Holla , Lorenzo Pieralisi , Marc Hulsman , linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linuxppc-dev@lists.ozlabs.org, patches@opensource.cirrus.com Subject: [PATCH v3 21/21] docs: hwmon: Add an index file and rename docs to *.rst Date: Wed, 17 Apr 2019 06:46:29 -0300 Message-Id: X-Mailer: git-send-email 2.20.1 In-Reply-To: References: MIME-Version: 1.0 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab Acked-by: Liviu Dudau --- .../devicetree/bindings/hwmon/g762.txt | 2 +- Documentation/hwmon/{ab8500 => ab8500.rst} | 2 +- ...guru-datasheet => abituguru-datasheet.rst} | 0 .../hwmon/{abituguru => abituguru.rst} | 0 .../hwmon/{abituguru3 => abituguru3.rst} | 0 Documentation/hwmon/{abx500 => abx500.rst} | 0 ...{acpi_power_meter => acpi_power_meter.rst} | 2 +- Documentation/hwmon/{ad7314 => ad7314.rst} | 0 .../hwmon/{adc128d818 => adc128d818.rst} | 0 Documentation/hwmon/{adm1021 => adm1021.rst} | 0 Documentation/hwmon/{adm1025 => adm1025.rst} | 0 Documentation/hwmon/{adm1026 => adm1026.rst} | 0 Documentation/hwmon/{adm1031 => adm1031.rst} | 0 Documentation/hwmon/{adm1275 => adm1275.rst} | 4 +- Documentation/hwmon/{adm9240 => adm9240.rst} | 0 Documentation/hwmon/{ads1015 => ads1015.rst} | 0 Documentation/hwmon/{ads7828 => ads7828.rst} | 0 Documentation/hwmon/{adt7410 => adt7410.rst} | 0 Documentation/hwmon/{adt7411 => adt7411.rst} | 0 Documentation/hwmon/{adt7462 => adt7462.rst} | 1 - Documentation/hwmon/{adt7470 => adt7470.rst} | 0 Documentation/hwmon/{adt7475 => adt7475.rst} | 0 Documentation/hwmon/{amc6821 => amc6821.rst} | 1 - Documentation/hwmon/{asb100 => asb100.rst} | 1 - Documentation/hwmon/{asc7621 => asc7621.rst} | 0 ...{aspeed-pwm-tacho => aspeed-pwm-tacho.rst} | 0 .../hwmon/{coretemp => coretemp.rst} | 0 Documentation/hwmon/{da9052 => da9052.rst} | 0 Documentation/hwmon/{da9055 => da9055.rst} | 0 Documentation/hwmon/{dme1737 => dme1737.rst} | 0 Documentation/hwmon/{ds1621 => ds1621.rst} | 0 Documentation/hwmon/{ds620 => ds620.rst} | 0 Documentation/hwmon/{emc1403 => emc1403.rst} | 0 Documentation/hwmon/{emc2103 => emc2103.rst} | 0 .../hwmon/{emc6w201 => emc6w201.rst} | 0 Documentation/hwmon/{f71805f => f71805f.rst} | 0 .../hwmon/{f71882fg => f71882fg.rst} | 0 .../hwmon/{fam15h_power => fam15h_power.rst} | 0 .../hwmon/{ftsteutates => ftsteutates.rst} | 0 Documentation/hwmon/{g760a => g760a.rst} | 0 Documentation/hwmon/{g762 => g762.rst} | 2 +- Documentation/hwmon/{gl518sm => gl518sm.rst} | 0 Documentation/hwmon/{hih6130 => hih6130.rst} | 0 ...on-kernel-api.txt => hwmon-kernel-api.rst} | 4 +- .../hwmon/{ibm-cffps => ibm-cffps.rst} | 0 Documentation/hwmon/{ibmaem => ibmaem.rst} | 0 .../hwmon/{ibmpowernv => ibmpowernv.rst} | 0 Documentation/hwmon/{ina209 => ina209.rst} | 0 Documentation/hwmon/{ina2xx => ina2xx.rst} | 2 +- Documentation/hwmon/{ina3221 => ina3221.rst} | 0 Documentation/hwmon/index.rst | 179 ++++++++++++++++++ Documentation/hwmon/{ir35221 => ir35221.rst} | 0 Documentation/hwmon/{it87 => it87.rst} | 0 Documentation/hwmon/{jc42 => jc42.rst} | 0 Documentation/hwmon/{k10temp => k10temp.rst} | 0 Documentation/hwmon/{k8temp => k8temp.rst} | 0 .../hwmon/{lineage-pem => lineage-pem.rst} | 0 Documentation/hwmon/{lm25066 => lm25066.rst} | 2 +- Documentation/hwmon/{lm63 => lm63.rst} | 0 Documentation/hwmon/{lm70 => lm70.rst} | 0 Documentation/hwmon/{lm73 => lm73.rst} | 0 Documentation/hwmon/{lm75 => lm75.rst} | 0 Documentation/hwmon/{lm77 => lm77.rst} | 0 Documentation/hwmon/{lm78 => lm78.rst} | 0 Documentation/hwmon/{lm80 => lm80.rst} | 0 Documentation/hwmon/{lm83 => lm83.rst} | 0 Documentation/hwmon/{lm85 => lm85.rst} | 0 Documentation/hwmon/{lm87 => lm87.rst} | 0 Documentation/hwmon/{lm90 => lm90.rst} | 0 Documentation/hwmon/{lm92 => lm92.rst} | 0 Documentation/hwmon/{lm93 => lm93.rst} | 0 Documentation/hwmon/{lm95234 => lm95234.rst} | 0 Documentation/hwmon/{lm95245 => lm95245.rst} | 0 Documentation/hwmon/{ltc2945 => ltc2945.rst} | 0 Documentation/hwmon/{ltc2978 => ltc2978.rst} | 0 Documentation/hwmon/{ltc2990 => ltc2990.rst} | 0 Documentation/hwmon/{ltc3815 => ltc3815.rst} | 0 Documentation/hwmon/{ltc4151 => ltc4151.rst} | 0 Documentation/hwmon/{ltc4215 => ltc4215.rst} | 0 Documentation/hwmon/{ltc4245 => ltc4245.rst} | 0 Documentation/hwmon/{ltc4260 => ltc4260.rst} | 0 Documentation/hwmon/{ltc4261 => ltc4261.rst} | 0 .../hwmon/{max16064 => max16064.rst} | 2 +- .../hwmon/{max16065 => max16065.rst} | 0 Documentation/hwmon/{max1619 => max1619.rst} | 1 - Documentation/hwmon/{max1668 => max1668.rst} | 0 Documentation/hwmon/{max197 => max197.rst} | 0 .../hwmon/{max20751 => max20751.rst} | 2 +- .../hwmon/{max31722 => max31722.rst} | 0 .../hwmon/{max31785 => max31785.rst} | 0 .../hwmon/{max31790 => max31790.rst} | 0 .../hwmon/{max34440 => max34440.rst} | 2 +- Documentation/hwmon/{max6639 => max6639.rst} | 0 Documentation/hwmon/{max6642 => max6642.rst} | 0 Documentation/hwmon/{max6650 => max6650.rst} | 1 - Documentation/hwmon/{max6697 => max6697.rst} | 0 Documentation/hwmon/{max8688 => max8688.rst} | 2 +- .../hwmon/{mc13783-adc => mc13783-adc.rst} | 0 Documentation/hwmon/{mcp3021 => mcp3021.rst} | 0 .../hwmon/{menf21bmc => menf21bmc.rst} | 0 .../hwmon/{mlxreg-fan => mlxreg-fan.rst} | 0 Documentation/hwmon/{nct6683 => nct6683.rst} | 0 Documentation/hwmon/{nct6775 => nct6775.rst} | 0 Documentation/hwmon/{nct7802 => nct7802.rst} | 0 Documentation/hwmon/{nct7904 => nct7904.rst} | 0 .../{npcm750-pwm-fan => npcm750-pwm-fan.rst} | 0 Documentation/hwmon/{nsa320 => nsa320.rst} | 0 .../{ntc_thermistor => ntc_thermistor.rst} | 0 Documentation/hwmon/{occ => occ.rst} | 0 Documentation/hwmon/{pc87360 => pc87360.rst} | 0 Documentation/hwmon/{pc87427 => pc87427.rst} | 0 Documentation/hwmon/{pcf8591 => pcf8591.rst} | 0 .../hwmon/{pmbus-core => pmbus-core.rst} | 0 Documentation/hwmon/{pmbus => pmbus.rst} | 0 .../hwmon/{powr1220 => powr1220.rst} | 0 Documentation/hwmon/{pwm-fan => pwm-fan.rst} | 0 ...aspberrypi-hwmon => raspberrypi-hwmon.rst} | 0 Documentation/hwmon/{sch5627 => sch5627.rst} | 0 Documentation/hwmon/{sch5636 => sch5636.rst} | 0 .../hwmon/{scpi-hwmon => scpi-hwmon.rst} | 0 Documentation/hwmon/{sht15 => sht15.rst} | 0 Documentation/hwmon/{sht21 => sht21.rst} | 0 Documentation/hwmon/{sht3x => sht3x.rst} | 0 Documentation/hwmon/{shtc1 => shtc1.rst} | 0 Documentation/hwmon/{sis5595 => sis5595.rst} | 1 - Documentation/hwmon/{smm665 => smm665.rst} | 0 .../hwmon/{smsc47b397 => smsc47b397.rst} | 0 .../hwmon/{smsc47m1 => smsc47m1.rst} | 0 .../hwmon/{smsc47m192 => smsc47m192.rst} | 0 ...mitting-patches => submitting-patches.rst} | 6 +- .../{sysfs-interface => sysfs-interface.rst} | 0 Documentation/hwmon/{tc654 => tc654.rst} | 0 Documentation/hwmon/{tc74 => tc74.rst} | 0 Documentation/hwmon/{thmc50 => thmc50.rst} | 1 - Documentation/hwmon/{tmp102 => tmp102.rst} | 2 +- Documentation/hwmon/{tmp103 => tmp103.rst} | 2 +- Documentation/hwmon/{tmp108 => tmp108.rst} | 2 +- Documentation/hwmon/{tmp401 => tmp401.rst} | 2 +- Documentation/hwmon/{tmp421 => tmp421.rst} | 0 .../hwmon/{tps40422 => tps40422.rst} | 2 +- ...4030-madc-hwmon => twl4030-madc-hwmon.rst} | 0 Documentation/hwmon/{ucd9000 => ucd9000.rst} | 4 +- Documentation/hwmon/{ucd9200 => ucd9200.rst} | 4 +- .../{userspace-tools => userspace-tools.rst} | 0 .../hwmon/{vexpress => vexpress.rst} | 0 Documentation/hwmon/{via686a => via686a.rst} | 0 Documentation/hwmon/{vt1211 => vt1211.rst} | 0 .../hwmon/{w83627ehf => w83627ehf.rst} | 0 .../hwmon/{w83627hf => w83627hf.rst} | 0 Documentation/hwmon/{w83773g => w83773g.rst} | 0 Documentation/hwmon/{w83781d => w83781d.rst} | 0 Documentation/hwmon/{w83791d => w83791d.rst} | 2 +- Documentation/hwmon/{w83792d => w83792d.rst} | 0 Documentation/hwmon/{w83793 => w83793.rst} | 0 Documentation/hwmon/{w83795 => w83795.rst} | 0 .../hwmon/{w83l785ts => w83l785ts.rst} | 0 .../hwmon/{w83l786ng => w83l786ng.rst} | 0 Documentation/hwmon/{wm831x => wm831x.rst} | 0 Documentation/hwmon/{wm8350 => wm8350.rst} | 0 .../hwmon/{xgene-hwmon => xgene-hwmon.rst} | 0 Documentation/hwmon/{zl6100 => zl6100.rst} | 2 +- Documentation/index.rst | 1 + Documentation/thermal/sysfs-api.txt | 2 +- MAINTAINERS | 108 +++++------ drivers/hwmon/Kconfig | 8 +- drivers/hwmon/ads7828.c | 2 +- drivers/hwmon/max197.c | 2 +- drivers/hwmon/sht15.c | 2 +- include/linux/platform_data/ads7828.h | 2 +- include/linux/platform_data/ds620.h | 2 +- include/linux/platform_data/ina2xx.h | 2 +- include/linux/platform_data/max197.h | 2 +- include/linux/platform_data/ntc_thermistor.h | 2 +- 173 files changed, 275 insertions(+), 102 deletions(-) rename Documentation/hwmon/{ab8500 => ab8500.rst} (86%) rename Documentation/hwmon/{abituguru-datasheet => abituguru-datasheet.rst} (100%) rename Documentation/hwmon/{abituguru => abituguru.rst} (100%) rename Documentation/hwmon/{abituguru3 => abituguru3.rst} (100%) rename Documentation/hwmon/{abx500 => abx500.rst} (100%) rename Documentation/hwmon/{acpi_power_meter => acpi_power_meter.rst} (97%) rename Documentation/hwmon/{ad7314 => ad7314.rst} (100%) rename Documentation/hwmon/{adc128d818 => adc128d818.rst} (100%) rename Documentation/hwmon/{adm1021 => adm1021.rst} (100%) rename Documentation/hwmon/{adm1025 => adm1025.rst} (100%) rename Documentation/hwmon/{adm1026 => adm1026.rst} (100%) rename Documentation/hwmon/{adm1031 => adm1031.rst} (100%) rename Documentation/hwmon/{adm1275 => adm1275.rst} (97%) rename Documentation/hwmon/{adm9240 => adm9240.rst} (100%) rename Documentation/hwmon/{ads1015 => ads1015.rst} (100%) rename Documentation/hwmon/{ads7828 => ads7828.rst} (100%) rename Documentation/hwmon/{adt7410 => adt7410.rst} (100%) rename Documentation/hwmon/{adt7411 => adt7411.rst} (100%) rename Documentation/hwmon/{adt7462 => adt7462.rst} (99%) rename Documentation/hwmon/{adt7470 => adt7470.rst} (100%) rename Documentation/hwmon/{adt7475 => adt7475.rst} (100%) rename Documentation/hwmon/{amc6821 => amc6821.rst} (99%) rename Documentation/hwmon/{asb100 => asb100.rst} (99%) rename Documentation/hwmon/{asc7621 => asc7621.rst} (100%) rename Documentation/hwmon/{aspeed-pwm-tacho => aspeed-pwm-tacho.rst} (100%) rename Documentation/hwmon/{coretemp => coretemp.rst} (100%) rename Documentation/hwmon/{da9052 => da9052.rst} (100%) rename Documentation/hwmon/{da9055 => da9055.rst} (100%) rename Documentation/hwmon/{dme1737 => dme1737.rst} (100%) rename Documentation/hwmon/{ds1621 => ds1621.rst} (100%) rename Documentation/hwmon/{ds620 => ds620.rst} (100%) rename Documentation/hwmon/{emc1403 => emc1403.rst} (100%) rename Documentation/hwmon/{emc2103 => emc2103.rst} (100%) rename Documentation/hwmon/{emc6w201 => emc6w201.rst} (100%) rename Documentation/hwmon/{f71805f => f71805f.rst} (100%) rename Documentation/hwmon/{f71882fg => f71882fg.rst} (100%) rename Documentation/hwmon/{fam15h_power => fam15h_power.rst} (100%) rename Documentation/hwmon/{ftsteutates => ftsteutates.rst} (100%) rename Documentation/hwmon/{g760a => g760a.rst} (100%) rename Documentation/hwmon/{g762 => g762.rst} (97%) rename Documentation/hwmon/{gl518sm => gl518sm.rst} (100%) rename Documentation/hwmon/{hih6130 => hih6130.rst} (100%) rename Documentation/hwmon/{hwmon-kernel-api.txt => hwmon-kernel-api.rst} (99%) rename Documentation/hwmon/{ibm-cffps => ibm-cffps.rst} (100%) rename Documentation/hwmon/{ibmaem => ibmaem.rst} (100%) rename Documentation/hwmon/{ibmpowernv => ibmpowernv.rst} (100%) rename Documentation/hwmon/{ina209 => ina209.rst} (100%) rename Documentation/hwmon/{ina2xx => ina2xx.rst} (97%) rename Documentation/hwmon/{ina3221 => ina3221.rst} (100%) create mode 100644 Documentation/hwmon/index.rst rename Documentation/hwmon/{ir35221 => ir35221.rst} (100%) rename Documentation/hwmon/{it87 => it87.rst} (100%) rename Documentation/hwmon/{jc42 => jc42.rst} (100%) rename Documentation/hwmon/{k10temp => k10temp.rst} (100%) rename Documentation/hwmon/{k8temp => k8temp.rst} (100%) rename Documentation/hwmon/{lineage-pem => lineage-pem.rst} (100%) rename Documentation/hwmon/{lm25066 => lm25066.rst} (97%) rename Documentation/hwmon/{lm63 => lm63.rst} (100%) rename Documentation/hwmon/{lm70 => lm70.rst} (100%) rename Documentation/hwmon/{lm73 => lm73.rst} (100%) rename Documentation/hwmon/{lm75 => lm75.rst} (100%) rename Documentation/hwmon/{lm77 => lm77.rst} (100%) rename Documentation/hwmon/{lm78 => lm78.rst} (100%) rename Documentation/hwmon/{lm80 => lm80.rst} (100%) rename Documentation/hwmon/{lm83 => lm83.rst} (100%) rename Documentation/hwmon/{lm85 => lm85.rst} (100%) rename Documentation/hwmon/{lm87 => lm87.rst} (100%) rename Documentation/hwmon/{lm90 => lm90.rst} (100%) rename Documentation/hwmon/{lm92 => lm92.rst} (100%) rename Documentation/hwmon/{lm93 => lm93.rst} (100%) rename Documentation/hwmon/{lm95234 => lm95234.rst} (100%) rename Documentation/hwmon/{lm95245 => lm95245.rst} (100%) rename Documentation/hwmon/{ltc2945 => ltc2945.rst} (100%) rename Documentation/hwmon/{ltc2978 => ltc2978.rst} (100%) rename Documentation/hwmon/{ltc2990 => ltc2990.rst} (100%) rename Documentation/hwmon/{ltc3815 => ltc3815.rst} (100%) rename Documentation/hwmon/{ltc4151 => ltc4151.rst} (100%) rename Documentation/hwmon/{ltc4215 => ltc4215.rst} (100%) rename Documentation/hwmon/{ltc4245 => ltc4245.rst} (100%) rename Documentation/hwmon/{ltc4260 => ltc4260.rst} (100%) rename Documentation/hwmon/{ltc4261 => ltc4261.rst} (100%) rename Documentation/hwmon/{max16064 => max16064.rst} (96%) rename Documentation/hwmon/{max16065 => max16065.rst} (100%) rename Documentation/hwmon/{max1619 => max1619.rst} (99%) rename Documentation/hwmon/{max1668 => max1668.rst} (100%) rename Documentation/hwmon/{max197 => max197.rst} (100%) rename Documentation/hwmon/{max20751 => max20751.rst} (96%) rename Documentation/hwmon/{max31722 => max31722.rst} (100%) rename Documentation/hwmon/{max31785 => max31785.rst} (100%) rename Documentation/hwmon/{max31790 => max31790.rst} (100%) rename Documentation/hwmon/{max34440 => max34440.rst} (98%) rename Documentation/hwmon/{max6639 => max6639.rst} (100%) rename Documentation/hwmon/{max6642 => max6642.rst} (100%) rename Documentation/hwmon/{max6650 => max6650.rst} (99%) rename Documentation/hwmon/{max6697 => max6697.rst} (100%) rename Documentation/hwmon/{max8688 => max8688.rst} (97%) rename Documentation/hwmon/{mc13783-adc => mc13783-adc.rst} (100%) rename Documentation/hwmon/{mcp3021 => mcp3021.rst} (100%) rename Documentation/hwmon/{menf21bmc => menf21bmc.rst} (100%) rename Documentation/hwmon/{mlxreg-fan => mlxreg-fan.rst} (100%) rename Documentation/hwmon/{nct6683 => nct6683.rst} (100%) rename Documentation/hwmon/{nct6775 => nct6775.rst} (100%) rename Documentation/hwmon/{nct7802 => nct7802.rst} (100%) rename Documentation/hwmon/{nct7904 => nct7904.rst} (100%) rename Documentation/hwmon/{npcm750-pwm-fan => npcm750-pwm-fan.rst} (100%) rename Documentation/hwmon/{nsa320 => nsa320.rst} (100%) rename Documentation/hwmon/{ntc_thermistor => ntc_thermistor.rst} (100%) rename Documentation/hwmon/{occ => occ.rst} (100%) rename Documentation/hwmon/{pc87360 => pc87360.rst} (100%) rename Documentation/hwmon/{pc87427 => pc87427.rst} (100%) rename Documentation/hwmon/{pcf8591 => pcf8591.rst} (100%) rename Documentation/hwmon/{pmbus-core => pmbus-core.rst} (100%) rename Documentation/hwmon/{pmbus => pmbus.rst} (100%) rename Documentation/hwmon/{powr1220 => powr1220.rst} (100%) rename Documentation/hwmon/{pwm-fan => pwm-fan.rst} (100%) rename Documentation/hwmon/{raspberrypi-hwmon => raspberrypi-hwmon.rst} (100%) rename Documentation/hwmon/{sch5627 => sch5627.rst} (100%) rename Documentation/hwmon/{sch5636 => sch5636.rst} (100%) rename Documentation/hwmon/{scpi-hwmon => scpi-hwmon.rst} (100%) rename Documentation/hwmon/{sht15 => sht15.rst} (100%) rename Documentation/hwmon/{sht21 => sht21.rst} (100%) rename Documentation/hwmon/{sht3x => sht3x.rst} (100%) rename Documentation/hwmon/{shtc1 => shtc1.rst} (100%) rename Documentation/hwmon/{sis5595 => sis5595.rst} (99%) rename Documentation/hwmon/{smm665 => smm665.rst} (100%) rename Documentation/hwmon/{smsc47b397 => smsc47b397.rst} (100%) rename Documentation/hwmon/{smsc47m1 => smsc47m1.rst} (100%) rename Documentation/hwmon/{smsc47m192 => smsc47m192.rst} (100%) rename Documentation/hwmon/{submitting-patches => submitting-patches.rst} (98%) rename Documentation/hwmon/{sysfs-interface => sysfs-interface.rst} (100%) rename Documentation/hwmon/{tc654 => tc654.rst} (100%) rename Documentation/hwmon/{tc74 => tc74.rst} (100%) rename Documentation/hwmon/{thmc50 => thmc50.rst} (99%) rename Documentation/hwmon/{tmp102 => tmp102.rst} (93%) rename Documentation/hwmon/{tmp103 => tmp103.rst} (92%) rename Documentation/hwmon/{tmp108 => tmp108.rst} (95%) rename Documentation/hwmon/{tmp401 => tmp401.rst} (97%) rename Documentation/hwmon/{tmp421 => tmp421.rst} (100%) rename Documentation/hwmon/{tps40422 => tps40422.rst} (96%) rename Documentation/hwmon/{twl4030-madc-hwmon => twl4030-madc-hwmon.rst} (100%) rename Documentation/hwmon/{ucd9000 => ucd9000.rst} (97%) rename Documentation/hwmon/{ucd9200 => ucd9200.rst} (97%) rename Documentation/hwmon/{userspace-tools => userspace-tools.rst} (100%) rename Documentation/hwmon/{vexpress => vexpress.rst} (100%) rename Documentation/hwmon/{via686a => via686a.rst} (100%) rename Documentation/hwmon/{vt1211 => vt1211.rst} (100%) rename Documentation/hwmon/{w83627ehf => w83627ehf.rst} (100%) rename Documentation/hwmon/{w83627hf => w83627hf.rst} (100%) rename Documentation/hwmon/{w83773g => w83773g.rst} (100%) rename Documentation/hwmon/{w83781d => w83781d.rst} (100%) rename Documentation/hwmon/{w83791d => w83791d.rst} (99%) rename Documentation/hwmon/{w83792d => w83792d.rst} (100%) rename Documentation/hwmon/{w83793 => w83793.rst} (100%) rename Documentation/hwmon/{w83795 => w83795.rst} (100%) rename Documentation/hwmon/{w83l785ts => w83l785ts.rst} (100%) rename Documentation/hwmon/{w83l786ng => w83l786ng.rst} (100%) rename Documentation/hwmon/{wm831x => wm831x.rst} (100%) rename Documentation/hwmon/{wm8350 => wm8350.rst} (100%) rename Documentation/hwmon/{xgene-hwmon => xgene-hwmon.rst} (100%) rename Documentation/hwmon/{zl6100 => zl6100.rst} (98%) diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt index 25cc6d8ee575..6d154c4923de 100644 --- a/Documentation/devicetree/bindings/hwmon/g762.txt +++ b/Documentation/devicetree/bindings/hwmon/g762.txt @@ -21,7 +21,7 @@ If an optional property is not set in .dts file, then current value is kept unmodified (e.g. u-boot installed value). Additional information on operational parameters for the device is available -in Documentation/hwmon/g762. A detailed datasheet for the device is available +in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf. Example g762 node: diff --git a/Documentation/hwmon/ab8500 b/Documentation/hwmon/ab8500.rst similarity index 86% rename from Documentation/hwmon/ab8500 rename to Documentation/hwmon/ab8500.rst index d87c61151239..33f93a9cec04 100644 --- a/Documentation/hwmon/ab8500 +++ b/Documentation/hwmon/ab8500.rst @@ -18,7 +18,7 @@ Authors: Description ----------- -See also Documentation/hwmon/abx500. This is the ST-Ericsson AB8500 specific +See also Documentation/hwmon/abx500.rst. This is the ST-Ericsson AB8500 specific driver. Currently only the AB8500 internal sensor and one external sensor for battery diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet.rst similarity index 100% rename from Documentation/hwmon/abituguru-datasheet rename to Documentation/hwmon/abituguru-datasheet.rst diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru.rst similarity index 100% rename from Documentation/hwmon/abituguru rename to Documentation/hwmon/abituguru.rst diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3.rst similarity index 100% rename from Documentation/hwmon/abituguru3 rename to Documentation/hwmon/abituguru3.rst diff --git a/Documentation/hwmon/abx500 b/Documentation/hwmon/abx500.rst similarity index 100% rename from Documentation/hwmon/abx500 rename to Documentation/hwmon/abx500.rst diff --git a/Documentation/hwmon/acpi_power_meter b/Documentation/hwmon/acpi_power_meter.rst similarity index 97% rename from Documentation/hwmon/acpi_power_meter rename to Documentation/hwmon/acpi_power_meter.rst index 7665ca6ba957..4a0941ade0ca 100644 --- a/Documentation/hwmon/acpi_power_meter +++ b/Documentation/hwmon/acpi_power_meter.rst @@ -21,7 +21,7 @@ the ACPI 4.0 spec (Chapter 10.4). These devices have a simple set of features--a power meter that returns average power use over a configurable interval, an optional capping mechanism, and a couple of trip points. The sysfs interface conforms with the specification outlined in the "Power" section -of Documentation/hwmon/sysfs-interface. +of Documentation/hwmon/sysfs-interface.rst. Special Features ---------------- diff --git a/Documentation/hwmon/ad7314 b/Documentation/hwmon/ad7314.rst similarity index 100% rename from Documentation/hwmon/ad7314 rename to Documentation/hwmon/ad7314.rst diff --git a/Documentation/hwmon/adc128d818 b/Documentation/hwmon/adc128d818.rst similarity index 100% rename from Documentation/hwmon/adc128d818 rename to Documentation/hwmon/adc128d818.rst diff --git a/Documentation/hwmon/adm1021 b/Documentation/hwmon/adm1021.rst similarity index 100% rename from Documentation/hwmon/adm1021 rename to Documentation/hwmon/adm1021.rst diff --git a/Documentation/hwmon/adm1025 b/Documentation/hwmon/adm1025.rst similarity index 100% rename from Documentation/hwmon/adm1025 rename to Documentation/hwmon/adm1025.rst diff --git a/Documentation/hwmon/adm1026 b/Documentation/hwmon/adm1026.rst similarity index 100% rename from Documentation/hwmon/adm1026 rename to Documentation/hwmon/adm1026.rst diff --git a/Documentation/hwmon/adm1031 b/Documentation/hwmon/adm1031.rst similarity index 100% rename from Documentation/hwmon/adm1031 rename to Documentation/hwmon/adm1031.rst diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275.rst similarity index 97% rename from Documentation/hwmon/adm1275 rename to Documentation/hwmon/adm1275.rst index 5c5860011d6e..9a1913e5b4d9 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275.rst @@ -68,7 +68,7 @@ integrated 12 bit analog-to-digital converter (ADC), accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes @@ -90,7 +90,7 @@ Platform data support --------------------- The driver supports standard PMBus driver platform data. Please see -Documentation/hwmon/pmbus for details. +Documentation/hwmon/pmbus.rst for details. Sysfs entries diff --git a/Documentation/hwmon/adm9240 b/Documentation/hwmon/adm9240.rst similarity index 100% rename from Documentation/hwmon/adm9240 rename to Documentation/hwmon/adm9240.rst diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015.rst similarity index 100% rename from Documentation/hwmon/ads1015 rename to Documentation/hwmon/ads1015.rst diff --git a/Documentation/hwmon/ads7828 b/Documentation/hwmon/ads7828.rst similarity index 100% rename from Documentation/hwmon/ads7828 rename to Documentation/hwmon/ads7828.rst diff --git a/Documentation/hwmon/adt7410 b/Documentation/hwmon/adt7410.rst similarity index 100% rename from Documentation/hwmon/adt7410 rename to Documentation/hwmon/adt7410.rst diff --git a/Documentation/hwmon/adt7411 b/Documentation/hwmon/adt7411.rst similarity index 100% rename from Documentation/hwmon/adt7411 rename to Documentation/hwmon/adt7411.rst diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462.rst similarity index 99% rename from Documentation/hwmon/adt7462 rename to Documentation/hwmon/adt7462.rst index a7a831118d32..139e19696188 100644 --- a/Documentation/hwmon/adt7462 +++ b/Documentation/hwmon/adt7462.rst @@ -68,4 +68,3 @@ The ADT7462 will scale the pwm between the lower and higher pwm speed when the temperature is between the two temperature boundaries. PWM values range from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the temperature sensor associated with the PWM control exceeds temp#_max. - diff --git a/Documentation/hwmon/adt7470 b/Documentation/hwmon/adt7470.rst similarity index 100% rename from Documentation/hwmon/adt7470 rename to Documentation/hwmon/adt7470.rst diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475.rst similarity index 100% rename from Documentation/hwmon/adt7475 rename to Documentation/hwmon/adt7475.rst diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821.rst similarity index 99% rename from Documentation/hwmon/amc6821 rename to Documentation/hwmon/amc6821.rst index d10eabcbc0f3..5ddb2849da90 100644 --- a/Documentation/hwmon/amc6821 +++ b/Documentation/hwmon/amc6821.rst @@ -106,4 +106,3 @@ different settings, you can set the following parameters: - init=1, - pwminv: 0 default pwm output, 1 inverts pwm output. - diff --git a/Documentation/hwmon/asb100 b/Documentation/hwmon/asb100.rst similarity index 99% rename from Documentation/hwmon/asb100 rename to Documentation/hwmon/asb100.rst index 311d9f7b6926..c2d5f97085fe 100644 --- a/Documentation/hwmon/asb100 +++ b/Documentation/hwmon/asb100.rst @@ -71,4 +71,3 @@ TODO: * Experiment with temp. sensor types. * Are there really 13 voltage inputs? Probably not... * Cleanups, no doubt... - diff --git a/Documentation/hwmon/asc7621 b/Documentation/hwmon/asc7621.rst similarity index 100% rename from Documentation/hwmon/asc7621 rename to Documentation/hwmon/asc7621.rst diff --git a/Documentation/hwmon/aspeed-pwm-tacho b/Documentation/hwmon/aspeed-pwm-tacho.rst similarity index 100% rename from Documentation/hwmon/aspeed-pwm-tacho rename to Documentation/hwmon/aspeed-pwm-tacho.rst diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp.rst similarity index 100% rename from Documentation/hwmon/coretemp rename to Documentation/hwmon/coretemp.rst diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052.rst similarity index 100% rename from Documentation/hwmon/da9052 rename to Documentation/hwmon/da9052.rst diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055.rst similarity index 100% rename from Documentation/hwmon/da9055 rename to Documentation/hwmon/da9055.rst diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737.rst similarity index 100% rename from Documentation/hwmon/dme1737 rename to Documentation/hwmon/dme1737.rst diff --git a/Documentation/hwmon/ds1621 b/Documentation/hwmon/ds1621.rst similarity index 100% rename from Documentation/hwmon/ds1621 rename to Documentation/hwmon/ds1621.rst diff --git a/Documentation/hwmon/ds620 b/Documentation/hwmon/ds620.rst similarity index 100% rename from Documentation/hwmon/ds620 rename to Documentation/hwmon/ds620.rst diff --git a/Documentation/hwmon/emc1403 b/Documentation/hwmon/emc1403.rst similarity index 100% rename from Documentation/hwmon/emc1403 rename to Documentation/hwmon/emc1403.rst diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103.rst similarity index 100% rename from Documentation/hwmon/emc2103 rename to Documentation/hwmon/emc2103.rst diff --git a/Documentation/hwmon/emc6w201 b/Documentation/hwmon/emc6w201.rst similarity index 100% rename from Documentation/hwmon/emc6w201 rename to Documentation/hwmon/emc6w201.rst diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f.rst similarity index 100% rename from Documentation/hwmon/f71805f rename to Documentation/hwmon/f71805f.rst diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg.rst similarity index 100% rename from Documentation/hwmon/f71882fg rename to Documentation/hwmon/f71882fg.rst diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power.rst similarity index 100% rename from Documentation/hwmon/fam15h_power rename to Documentation/hwmon/fam15h_power.rst diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates.rst similarity index 100% rename from Documentation/hwmon/ftsteutates rename to Documentation/hwmon/ftsteutates.rst diff --git a/Documentation/hwmon/g760a b/Documentation/hwmon/g760a.rst similarity index 100% rename from Documentation/hwmon/g760a rename to Documentation/hwmon/g760a.rst diff --git a/Documentation/hwmon/g762 b/Documentation/hwmon/g762.rst similarity index 97% rename from Documentation/hwmon/g762 rename to Documentation/hwmon/g762.rst index 54574e26df21..0371b3365c48 100644 --- a/Documentation/hwmon/g762 +++ b/Documentation/hwmon/g762.rst @@ -7,7 +7,7 @@ modes - PWM or DC - are supported by the device. For additional information, a detailed datasheet is available at http://natisbad.org/NAS/ref/GMT_EDS-762_763-080710-0.2.pdf. sysfs -bindings are described in Documentation/hwmon/sysfs-interface. +bindings are described in Documentation/hwmon/sysfs-interface.rst. The following entries are available to the user in a subdirectory of /sys/bus/i2c/drivers/g762/ to control the operation of the device. diff --git a/Documentation/hwmon/gl518sm b/Documentation/hwmon/gl518sm.rst similarity index 100% rename from Documentation/hwmon/gl518sm rename to Documentation/hwmon/gl518sm.rst diff --git a/Documentation/hwmon/hih6130 b/Documentation/hwmon/hih6130.rst similarity index 100% rename from Documentation/hwmon/hih6130 rename to Documentation/hwmon/hih6130.rst diff --git a/Documentation/hwmon/hwmon-kernel-api.txt b/Documentation/hwmon/hwmon-kernel-api.rst similarity index 99% rename from Documentation/hwmon/hwmon-kernel-api.txt rename to Documentation/hwmon/hwmon-kernel-api.rst index b347b959fcda..c41eb6108103 100644 --- a/Documentation/hwmon/hwmon-kernel-api.txt +++ b/Documentation/hwmon/hwmon-kernel-api.rst @@ -12,10 +12,10 @@ drivers that want to use the hardware monitoring framework. This document does not describe what a hardware monitoring (hwmon) Driver or Device is. It also does not describe the API which can be used by user space to communicate with a hardware monitoring device. If you want to know this -then please read the following file: Documentation/hwmon/sysfs-interface. +then please read the following file: Documentation/hwmon/sysfs-interface.rst. For additional guidelines on how to write and improve hwmon drivers, please -also read Documentation/hwmon/submitting-patches. +also read Documentation/hwmon/submitting-patches.rst. The API ------- diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps.rst similarity index 100% rename from Documentation/hwmon/ibm-cffps rename to Documentation/hwmon/ibm-cffps.rst diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem.rst similarity index 100% rename from Documentation/hwmon/ibmaem rename to Documentation/hwmon/ibmaem.rst diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv.rst similarity index 100% rename from Documentation/hwmon/ibmpowernv rename to Documentation/hwmon/ibmpowernv.rst diff --git a/Documentation/hwmon/ina209 b/Documentation/hwmon/ina209.rst similarity index 100% rename from Documentation/hwmon/ina209 rename to Documentation/hwmon/ina209.rst diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx.rst similarity index 97% rename from Documentation/hwmon/ina2xx rename to Documentation/hwmon/ina2xx.rst index 95badf9c396f..94b9a260c518 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx.rst @@ -78,7 +78,7 @@ refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings if the device tree is used. Additionally ina226 supports update_interval attribute as described in -Documentation/hwmon/sysfs-interface. Internally the interval is the sum of +Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of bus and shunt voltage conversion times multiplied by the averaging rate. We don't touch the conversion times and only modify the number of averages. The lower limit of the update_interval is 2 ms, the upper limit is 2253 ms. diff --git a/Documentation/hwmon/ina3221 b/Documentation/hwmon/ina3221.rst similarity index 100% rename from Documentation/hwmon/ina3221 rename to Documentation/hwmon/ina3221.rst diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst new file mode 100644 index 000000000000..893804414510 --- /dev/null +++ b/Documentation/hwmon/index.rst @@ -0,0 +1,179 @@ +========================= +Linux Hardware Monitoring +========================= + +.. toctree:: + :maxdepth: 1 + + hwmon-kernel-api.rst + pmbus-core.rst + submitting-patches.rst + sysfs-interface.rst + userspace-tools.rst + +Hardware Monitoring Kernel Drivers +================================== + +.. toctree:: + :maxdepth: 1 + + ab8500.rst + abituguru.rst + abituguru3.rst + abx500.rst + acpi_power_meter.rst + ad7314.rst + adc128d818.rst + adm1021.rst + adm1025.rst + adm1026.rst + adm1031.rst + adm1275.rst + adm9240.rst + ads1015.rst + ads7828.rst + adt7410.rst + adt7411.rst + adt7462.rst + adt7470.rst + adt7475.rst + amc6821.rst + asb100.rst + asc7621.rst + aspeed-pwm-tacho.rst + coretemp.rst + da9052.rst + da9055.rst + dme1737.rst + ds1621.rst + ds620.rst + emc1403.rst + emc2103.rst + emc6w201.rst + f71805f.rst + f71882fg.rst + fam15h_power.rst + ftsteutates.rst + g760a.rst + g762.rst + gl518sm.rst + hih6130.rst + ibmaem.rst + ibm-cffps.rst + ibmpowernv.rst + ina209.rst + ina2xx.rst + ina3221.rst + ir35221.rst + it87.rst + jc42.rst + k10temp.rst + k8temp.rst + lineage-pem.rst + lm25066.rst + lm63.rst + lm70.rst + lm73.rst + lm75.rst + lm77.rst + lm78.rst + lm80.rst + lm83.rst + lm85.rst + lm87.rst + lm90.rst + lm92.rst + lm93.rst + lm95234.rst + lm95245.rst + ltc2945.rst + ltc2978.rst + ltc2990.rst + ltc3815.rst + ltc4151.rst + ltc4215.rst + ltc4245.rst + ltc4260.rst + ltc4261.rst + max16064.rst + max16065.rst + max1619.rst + max1668.rst + max197.rst + max20751.rst + max31722.rst + max31785.rst + max31790.rst + max34440.rst + max6639.rst + max6642.rst + max6650.rst + max6697.rst + max8688.rst + mc13783-adc.rst + mcp3021.rst + menf21bmc.rst + mlxreg-fan.rst + nct6683.rst + nct6775.rst + nct7802.rst + nct7904.rst + npcm750-pwm-fan.rst + nsa320.rst + ntc_thermistor.rst + occ.rst + pc87360.rst + pc87427.rst + pcf8591.rst + pmbus.rst + powr1220.rst + pwm-fan.rst + raspberrypi-hwmon.rst + sch5627.rst + sch5636.rst + scpi-hwmon.rst + sht15.rst + sht21.rst + sht3x.rst + shtc1.rst + sis5595.rst + smm665.rst + smsc47b397.rst + smsc47m192.rst + smsc47m1.rst + tc654.rst + tc74.rst + thmc50.rst + tmp102.rst + tmp103.rst + tmp108.rst + tmp401.rst + tmp421.rst + tps40422.rst + twl4030-madc-hwmon.rst + ucd9000.rst + ucd9200.rst + vexpress.rst + via686a.rst + vt1211.rst + w83627ehf.rst + w83627hf.rst + w83773g.rst + w83781d.rst + w83791d.rst + w83792d.rst + w83793.rst + w83795.rst + w83l785ts.rst + w83l786ng.rst + wm831x.rst + wm8350.rst + xgene-hwmon.rst + zl6100.rst + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/hwmon/ir35221 b/Documentation/hwmon/ir35221.rst similarity index 100% rename from Documentation/hwmon/ir35221 rename to Documentation/hwmon/ir35221.rst diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87.rst similarity index 100% rename from Documentation/hwmon/it87 rename to Documentation/hwmon/it87.rst diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42.rst similarity index 100% rename from Documentation/hwmon/jc42 rename to Documentation/hwmon/jc42.rst diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp.rst similarity index 100% rename from Documentation/hwmon/k10temp rename to Documentation/hwmon/k10temp.rst diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp.rst similarity index 100% rename from Documentation/hwmon/k8temp rename to Documentation/hwmon/k8temp.rst diff --git a/Documentation/hwmon/lineage-pem b/Documentation/hwmon/lineage-pem.rst similarity index 100% rename from Documentation/hwmon/lineage-pem rename to Documentation/hwmon/lineage-pem.rst diff --git a/Documentation/hwmon/lm25066 b/Documentation/hwmon/lm25066.rst similarity index 97% rename from Documentation/hwmon/lm25066 rename to Documentation/hwmon/lm25066.rst index 60b7f2722931..da15e3094c8c 100644 --- a/Documentation/hwmon/lm25066 +++ b/Documentation/hwmon/lm25066.rst @@ -69,7 +69,7 @@ LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring, Control, and Protection ICs. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63.rst similarity index 100% rename from Documentation/hwmon/lm63 rename to Documentation/hwmon/lm63.rst diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70.rst similarity index 100% rename from Documentation/hwmon/lm70 rename to Documentation/hwmon/lm70.rst diff --git a/Documentation/hwmon/lm73 b/Documentation/hwmon/lm73.rst similarity index 100% rename from Documentation/hwmon/lm73 rename to Documentation/hwmon/lm73.rst diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75.rst similarity index 100% rename from Documentation/hwmon/lm75 rename to Documentation/hwmon/lm75.rst diff --git a/Documentation/hwmon/lm77 b/Documentation/hwmon/lm77.rst similarity index 100% rename from Documentation/hwmon/lm77 rename to Documentation/hwmon/lm77.rst diff --git a/Documentation/hwmon/lm78 b/Documentation/hwmon/lm78.rst similarity index 100% rename from Documentation/hwmon/lm78 rename to Documentation/hwmon/lm78.rst diff --git a/Documentation/hwmon/lm80 b/Documentation/hwmon/lm80.rst similarity index 100% rename from Documentation/hwmon/lm80 rename to Documentation/hwmon/lm80.rst diff --git a/Documentation/hwmon/lm83 b/Documentation/hwmon/lm83.rst similarity index 100% rename from Documentation/hwmon/lm83 rename to Documentation/hwmon/lm83.rst diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85.rst similarity index 100% rename from Documentation/hwmon/lm85 rename to Documentation/hwmon/lm85.rst diff --git a/Documentation/hwmon/lm87 b/Documentation/hwmon/lm87.rst similarity index 100% rename from Documentation/hwmon/lm87 rename to Documentation/hwmon/lm87.rst diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90.rst similarity index 100% rename from Documentation/hwmon/lm90 rename to Documentation/hwmon/lm90.rst diff --git a/Documentation/hwmon/lm92 b/Documentation/hwmon/lm92.rst similarity index 100% rename from Documentation/hwmon/lm92 rename to Documentation/hwmon/lm92.rst diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93.rst similarity index 100% rename from Documentation/hwmon/lm93 rename to Documentation/hwmon/lm93.rst diff --git a/Documentation/hwmon/lm95234 b/Documentation/hwmon/lm95234.rst similarity index 100% rename from Documentation/hwmon/lm95234 rename to Documentation/hwmon/lm95234.rst diff --git a/Documentation/hwmon/lm95245 b/Documentation/hwmon/lm95245.rst similarity index 100% rename from Documentation/hwmon/lm95245 rename to Documentation/hwmon/lm95245.rst diff --git a/Documentation/hwmon/ltc2945 b/Documentation/hwmon/ltc2945.rst similarity index 100% rename from Documentation/hwmon/ltc2945 rename to Documentation/hwmon/ltc2945.rst diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978.rst similarity index 100% rename from Documentation/hwmon/ltc2978 rename to Documentation/hwmon/ltc2978.rst diff --git a/Documentation/hwmon/ltc2990 b/Documentation/hwmon/ltc2990.rst similarity index 100% rename from Documentation/hwmon/ltc2990 rename to Documentation/hwmon/ltc2990.rst diff --git a/Documentation/hwmon/ltc3815 b/Documentation/hwmon/ltc3815.rst similarity index 100% rename from Documentation/hwmon/ltc3815 rename to Documentation/hwmon/ltc3815.rst diff --git a/Documentation/hwmon/ltc4151 b/Documentation/hwmon/ltc4151.rst similarity index 100% rename from Documentation/hwmon/ltc4151 rename to Documentation/hwmon/ltc4151.rst diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215.rst similarity index 100% rename from Documentation/hwmon/ltc4215 rename to Documentation/hwmon/ltc4215.rst diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245.rst similarity index 100% rename from Documentation/hwmon/ltc4245 rename to Documentation/hwmon/ltc4245.rst diff --git a/Documentation/hwmon/ltc4260 b/Documentation/hwmon/ltc4260.rst similarity index 100% rename from Documentation/hwmon/ltc4260 rename to Documentation/hwmon/ltc4260.rst diff --git a/Documentation/hwmon/ltc4261 b/Documentation/hwmon/ltc4261.rst similarity index 100% rename from Documentation/hwmon/ltc4261 rename to Documentation/hwmon/ltc4261.rst diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064.rst similarity index 96% rename from Documentation/hwmon/max16064 rename to Documentation/hwmon/max16064.rst index 61ec679dc477..6d5e9538991f 100644 --- a/Documentation/hwmon/max16064 +++ b/Documentation/hwmon/max16064.rst @@ -21,7 +21,7 @@ This driver supports hardware monitoring for Maxim MAX16064 Quad Power-Supply Controller with Active-Voltage Output Control and PMBus Interface. The driver is a client driver to the core PMBus driver. -Please see Documentation/hwmon/pmbus for details on PMBus client drivers. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/max16065 b/Documentation/hwmon/max16065.rst similarity index 100% rename from Documentation/hwmon/max16065 rename to Documentation/hwmon/max16065.rst diff --git a/Documentation/hwmon/max1619 b/Documentation/hwmon/max1619.rst similarity index 99% rename from Documentation/hwmon/max1619 rename to Documentation/hwmon/max1619.rst index 4b3762c4eceb..e25956e70f73 100644 --- a/Documentation/hwmon/max1619 +++ b/Documentation/hwmon/max1619.rst @@ -31,4 +31,3 @@ Only the external sensor has high and low limits. The max1619 driver will not update its values more frequently than every other second; reading them more often will do no harm, but will return 'old' values. - diff --git a/Documentation/hwmon/max1668 b/Documentation/hwmon/max1668.rst similarity index 100% rename from Documentation/hwmon/max1668 rename to Documentation/hwmon/max1668.rst diff --git a/Documentation/hwmon/max197 b/Documentation/hwmon/max197.rst similarity index 100% rename from Documentation/hwmon/max197 rename to Documentation/hwmon/max197.rst diff --git a/Documentation/hwmon/max20751 b/Documentation/hwmon/max20751.rst similarity index 96% rename from Documentation/hwmon/max20751 rename to Documentation/hwmon/max20751.rst index d546695900ef..aa4469be6674 100644 --- a/Documentation/hwmon/max20751 +++ b/Documentation/hwmon/max20751.rst @@ -23,7 +23,7 @@ This driver supports MAX20751 Multiphase Master with PMBus Interface and Internal Buck Converter. The driver is a client driver to the core PMBus driver. -Please see Documentation/hwmon/pmbus for details on PMBus client drivers. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/max31722 b/Documentation/hwmon/max31722.rst similarity index 100% rename from Documentation/hwmon/max31722 rename to Documentation/hwmon/max31722.rst diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785.rst similarity index 100% rename from Documentation/hwmon/max31785 rename to Documentation/hwmon/max31785.rst diff --git a/Documentation/hwmon/max31790 b/Documentation/hwmon/max31790.rst similarity index 100% rename from Documentation/hwmon/max31790 rename to Documentation/hwmon/max31790.rst diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440.rst similarity index 98% rename from Documentation/hwmon/max34440 rename to Documentation/hwmon/max34440.rst index 639838ef29fd..939138e12b02 100644 --- a/Documentation/hwmon/max34440 +++ b/Documentation/hwmon/max34440.rst @@ -76,7 +76,7 @@ based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage channels. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/max6639 b/Documentation/hwmon/max6639.rst similarity index 100% rename from Documentation/hwmon/max6639 rename to Documentation/hwmon/max6639.rst diff --git a/Documentation/hwmon/max6642 b/Documentation/hwmon/max6642.rst similarity index 100% rename from Documentation/hwmon/max6642 rename to Documentation/hwmon/max6642.rst diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650.rst similarity index 99% rename from Documentation/hwmon/max6650 rename to Documentation/hwmon/max6650.rst index 74dc3f0caaa2..253482add082 100644 --- a/Documentation/hwmon/max6650 +++ b/Documentation/hwmon/max6650.rst @@ -72,4 +72,3 @@ clock: The clock frequency in Hz of the chip the driver should assume [254000] Please have a look at the MAX6650/6651 data sheet and make sure that you fully understand the meaning of these parameters before you attempt to change them. - diff --git a/Documentation/hwmon/max6697 b/Documentation/hwmon/max6697.rst similarity index 100% rename from Documentation/hwmon/max6697 rename to Documentation/hwmon/max6697.rst diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688.rst similarity index 97% rename from Documentation/hwmon/max8688 rename to Documentation/hwmon/max8688.rst index 43da139234c1..009487759c61 100644 --- a/Documentation/hwmon/max8688 +++ b/Documentation/hwmon/max8688.rst @@ -21,7 +21,7 @@ This driver supports hardware monitoring for Maxim MAX8688 Digital Power-Supply Controller/Monitor with PMBus Interface. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc.rst similarity index 100% rename from Documentation/hwmon/mc13783-adc rename to Documentation/hwmon/mc13783-adc.rst diff --git a/Documentation/hwmon/mcp3021 b/Documentation/hwmon/mcp3021.rst similarity index 100% rename from Documentation/hwmon/mcp3021 rename to Documentation/hwmon/mcp3021.rst diff --git a/Documentation/hwmon/menf21bmc b/Documentation/hwmon/menf21bmc.rst similarity index 100% rename from Documentation/hwmon/menf21bmc rename to Documentation/hwmon/menf21bmc.rst diff --git a/Documentation/hwmon/mlxreg-fan b/Documentation/hwmon/mlxreg-fan.rst similarity index 100% rename from Documentation/hwmon/mlxreg-fan rename to Documentation/hwmon/mlxreg-fan.rst diff --git a/Documentation/hwmon/nct6683 b/Documentation/hwmon/nct6683.rst similarity index 100% rename from Documentation/hwmon/nct6683 rename to Documentation/hwmon/nct6683.rst diff --git a/Documentation/hwmon/nct6775 b/Documentation/hwmon/nct6775.rst similarity index 100% rename from Documentation/hwmon/nct6775 rename to Documentation/hwmon/nct6775.rst diff --git a/Documentation/hwmon/nct7802 b/Documentation/hwmon/nct7802.rst similarity index 100% rename from Documentation/hwmon/nct7802 rename to Documentation/hwmon/nct7802.rst diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904.rst similarity index 100% rename from Documentation/hwmon/nct7904 rename to Documentation/hwmon/nct7904.rst diff --git a/Documentation/hwmon/npcm750-pwm-fan b/Documentation/hwmon/npcm750-pwm-fan.rst similarity index 100% rename from Documentation/hwmon/npcm750-pwm-fan rename to Documentation/hwmon/npcm750-pwm-fan.rst diff --git a/Documentation/hwmon/nsa320 b/Documentation/hwmon/nsa320.rst similarity index 100% rename from Documentation/hwmon/nsa320 rename to Documentation/hwmon/nsa320.rst diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor.rst similarity index 100% rename from Documentation/hwmon/ntc_thermistor rename to Documentation/hwmon/ntc_thermistor.rst diff --git a/Documentation/hwmon/occ b/Documentation/hwmon/occ.rst similarity index 100% rename from Documentation/hwmon/occ rename to Documentation/hwmon/occ.rst diff --git a/Documentation/hwmon/pc87360 b/Documentation/hwmon/pc87360.rst similarity index 100% rename from Documentation/hwmon/pc87360 rename to Documentation/hwmon/pc87360.rst diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427.rst similarity index 100% rename from Documentation/hwmon/pc87427 rename to Documentation/hwmon/pc87427.rst diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591.rst similarity index 100% rename from Documentation/hwmon/pcf8591 rename to Documentation/hwmon/pcf8591.rst diff --git a/Documentation/hwmon/pmbus-core b/Documentation/hwmon/pmbus-core.rst similarity index 100% rename from Documentation/hwmon/pmbus-core rename to Documentation/hwmon/pmbus-core.rst diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus.rst similarity index 100% rename from Documentation/hwmon/pmbus rename to Documentation/hwmon/pmbus.rst diff --git a/Documentation/hwmon/powr1220 b/Documentation/hwmon/powr1220.rst similarity index 100% rename from Documentation/hwmon/powr1220 rename to Documentation/hwmon/powr1220.rst diff --git a/Documentation/hwmon/pwm-fan b/Documentation/hwmon/pwm-fan.rst similarity index 100% rename from Documentation/hwmon/pwm-fan rename to Documentation/hwmon/pwm-fan.rst diff --git a/Documentation/hwmon/raspberrypi-hwmon b/Documentation/hwmon/raspberrypi-hwmon.rst similarity index 100% rename from Documentation/hwmon/raspberrypi-hwmon rename to Documentation/hwmon/raspberrypi-hwmon.rst diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627.rst similarity index 100% rename from Documentation/hwmon/sch5627 rename to Documentation/hwmon/sch5627.rst diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636.rst similarity index 100% rename from Documentation/hwmon/sch5636 rename to Documentation/hwmon/sch5636.rst diff --git a/Documentation/hwmon/scpi-hwmon b/Documentation/hwmon/scpi-hwmon.rst similarity index 100% rename from Documentation/hwmon/scpi-hwmon rename to Documentation/hwmon/scpi-hwmon.rst diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15.rst similarity index 100% rename from Documentation/hwmon/sht15 rename to Documentation/hwmon/sht15.rst diff --git a/Documentation/hwmon/sht21 b/Documentation/hwmon/sht21.rst similarity index 100% rename from Documentation/hwmon/sht21 rename to Documentation/hwmon/sht21.rst diff --git a/Documentation/hwmon/sht3x b/Documentation/hwmon/sht3x.rst similarity index 100% rename from Documentation/hwmon/sht3x rename to Documentation/hwmon/sht3x.rst diff --git a/Documentation/hwmon/shtc1 b/Documentation/hwmon/shtc1.rst similarity index 100% rename from Documentation/hwmon/shtc1 rename to Documentation/hwmon/shtc1.rst diff --git a/Documentation/hwmon/sis5595 b/Documentation/hwmon/sis5595.rst similarity index 99% rename from Documentation/hwmon/sis5595 rename to Documentation/hwmon/sis5595.rst index 5acba6b0c0db..16123b3bfff9 100644 --- a/Documentation/hwmon/sis5595 +++ b/Documentation/hwmon/sis5595.rst @@ -121,4 +121,3 @@ Problems -------- Some chips refuse to be enabled. We don't know why. The driver will recognize this and print a message in dmesg. - diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665.rst similarity index 100% rename from Documentation/hwmon/smm665 rename to Documentation/hwmon/smm665.rst diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397.rst similarity index 100% rename from Documentation/hwmon/smsc47b397 rename to Documentation/hwmon/smsc47b397.rst diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1.rst similarity index 100% rename from Documentation/hwmon/smsc47m1 rename to Documentation/hwmon/smsc47m1.rst diff --git a/Documentation/hwmon/smsc47m192 b/Documentation/hwmon/smsc47m192.rst similarity index 100% rename from Documentation/hwmon/smsc47m192 rename to Documentation/hwmon/smsc47m192.rst diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches.rst similarity index 98% rename from Documentation/hwmon/submitting-patches rename to Documentation/hwmon/submitting-patches.rst index 12540b7d9b50..f9796b9d9db6 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches.rst @@ -39,7 +39,7 @@ increase the chances of your change being accepted. 2. Adding functionality to existing drivers ------------------------------------------- -* Make sure the documentation in Documentation/hwmon/ is up to +* Make sure the documentation in Documentation/hwmon/.rst is up to date. * Make sure the information in Kconfig is up to date. @@ -61,7 +61,7 @@ increase the chances of your change being accepted. * Consider adding yourself to MAINTAINERS. -* Document the driver in Documentation/hwmon/. +* Document the driver in Documentation/hwmon/.rst. * Add the driver to Kconfig and Makefile in alphabetical order. @@ -134,7 +134,7 @@ increase the chances of your change being accepted. non-standard attributes, or you believe you do, discuss it on the mailing list first. Either case, provide a detailed explanation why you need the non-standard attribute(s). - Standard attributes are specified in Documentation/hwmon/sysfs-interface. + Standard attributes are specified in Documentation/hwmon/sysfs-interface.rst. * When deciding which sysfs attributes to support, look at the chip's capabilities. While we do not expect your driver to support everything the diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface.rst similarity index 100% rename from Documentation/hwmon/sysfs-interface rename to Documentation/hwmon/sysfs-interface.rst diff --git a/Documentation/hwmon/tc654 b/Documentation/hwmon/tc654.rst similarity index 100% rename from Documentation/hwmon/tc654 rename to Documentation/hwmon/tc654.rst diff --git a/Documentation/hwmon/tc74 b/Documentation/hwmon/tc74.rst similarity index 100% rename from Documentation/hwmon/tc74 rename to Documentation/hwmon/tc74.rst diff --git a/Documentation/hwmon/thmc50 b/Documentation/hwmon/thmc50.rst similarity index 99% rename from Documentation/hwmon/thmc50 rename to Documentation/hwmon/thmc50.rst index 6dba1b59b20c..cfff3885287d 100644 --- a/Documentation/hwmon/thmc50 +++ b/Documentation/hwmon/thmc50.rst @@ -87,4 +87,3 @@ so it stops fans even if the value 0 into the ANALOG_OUT register does not. The driver was tested on Compaq AP550 with two ADM1022 chips (one works in the temp3 mode), five temperature readings and two fans. - diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102.rst similarity index 93% rename from Documentation/hwmon/tmp102 rename to Documentation/hwmon/tmp102.rst index 5e34821df4ab..b1f585531a88 100644 --- a/Documentation/hwmon/tmp102 +++ b/Documentation/hwmon/tmp102.rst @@ -28,4 +28,4 @@ The TMP102 has a programmable update rate that can select between 8, 4, 1, and 0.5 Hz. (Currently the driver only supports the default of 4 Hz). The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface under Temperatures). +Documentation/hwmon/sysfs-interface.rst under Temperatures). diff --git a/Documentation/hwmon/tmp103 b/Documentation/hwmon/tmp103.rst similarity index 92% rename from Documentation/hwmon/tmp103 rename to Documentation/hwmon/tmp103.rst index 7682a795e38c..15d25806d585 100644 --- a/Documentation/hwmon/tmp103 +++ b/Documentation/hwmon/tmp103.rst @@ -27,7 +27,7 @@ Resolution: 8 Bits Accuracy: ±1°C Typ (–10°C to +100°C) The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface under Temperatures). +Documentation/hwmon/sysfs-interface.rst under Temperatures). Please refer how to instantiate this driver: Documentation/i2c/instantiating-devices diff --git a/Documentation/hwmon/tmp108 b/Documentation/hwmon/tmp108.rst similarity index 95% rename from Documentation/hwmon/tmp108 rename to Documentation/hwmon/tmp108.rst index 7e08b7ef1e2f..5f4266a16cb2 100644 --- a/Documentation/hwmon/tmp108 +++ b/Documentation/hwmon/tmp108.rst @@ -38,4 +38,4 @@ and then the device is shut down automatically. (This driver only supports continuous mode.) The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface under Temperatures). +Documentation/hwmon/sysfs-interface.rst under Temperatures). diff --git a/Documentation/hwmon/tmp401 b/Documentation/hwmon/tmp401.rst similarity index 97% rename from Documentation/hwmon/tmp401 rename to Documentation/hwmon/tmp401.rst index bd865bbdb38d..6a05a0719bc7 100644 --- a/Documentation/hwmon/tmp401 +++ b/Documentation/hwmon/tmp401.rst @@ -68,7 +68,7 @@ supported by the driver so far, so using the default resolution of 0.5 degree). The driver provides the common sysfs-interface for temperatures (see -Documentation/hwmon/sysfs-interface under Temperatures). +Documentation/hwmon/sysfs-interface.rst under Temperatures). The TMP411 and TMP431 chips are compatible with TMP401. TMP411 provides some additional features. diff --git a/Documentation/hwmon/tmp421 b/Documentation/hwmon/tmp421.rst similarity index 100% rename from Documentation/hwmon/tmp421 rename to Documentation/hwmon/tmp421.rst diff --git a/Documentation/hwmon/tps40422 b/Documentation/hwmon/tps40422.rst similarity index 96% rename from Documentation/hwmon/tps40422 rename to Documentation/hwmon/tps40422.rst index 359751eb5ed4..b691e30479dd 100644 --- a/Documentation/hwmon/tps40422 +++ b/Documentation/hwmon/tps40422.rst @@ -21,7 +21,7 @@ This driver supports TI TPS40422 Dual-Output or Two-Phase Synchronous Buck Controller with PMBus The driver is a client driver to the core PMBus driver. -Please see Documentation/hwmon/pmbus for details on PMBus client drivers. +Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes diff --git a/Documentation/hwmon/twl4030-madc-hwmon b/Documentation/hwmon/twl4030-madc-hwmon.rst similarity index 100% rename from Documentation/hwmon/twl4030-madc-hwmon rename to Documentation/hwmon/twl4030-madc-hwmon.rst diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000.rst similarity index 97% rename from Documentation/hwmon/ucd9000 rename to Documentation/hwmon/ucd9000.rst index d69061b7312c..ebc4f2b3bfea 100644 --- a/Documentation/hwmon/ucd9000 +++ b/Documentation/hwmon/ucd9000.rst @@ -57,7 +57,7 @@ system-health monitor. The device integrates a 12-bit ADC for monitoring up to 13 power-supply voltage, current, or temperature inputs. This driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes @@ -72,7 +72,7 @@ Platform data support --------------------- The driver supports standard PMBus driver platform data. Please see -Documentation/hwmon/pmbus for details. +Documentation/hwmon/pmbus.rst for details. Sysfs entries diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200.rst similarity index 97% rename from Documentation/hwmon/ucd9200 rename to Documentation/hwmon/ucd9200.rst index 44eda4a579b6..b819dfd75f71 100644 --- a/Documentation/hwmon/ucd9200 +++ b/Documentation/hwmon/ucd9200.rst @@ -33,7 +33,7 @@ dedicated circuitry for DC/DC loop management with flash memory and a serial interface to support configuration, monitoring and management. This driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. Usage Notes @@ -48,7 +48,7 @@ Platform data support --------------------- The driver supports standard PMBus driver platform data. Please see -Documentation/hwmon/pmbus for details. +Documentation/hwmon/pmbus.rst for details. Sysfs entries diff --git a/Documentation/hwmon/userspace-tools b/Documentation/hwmon/userspace-tools.rst similarity index 100% rename from Documentation/hwmon/userspace-tools rename to Documentation/hwmon/userspace-tools.rst diff --git a/Documentation/hwmon/vexpress b/Documentation/hwmon/vexpress.rst similarity index 100% rename from Documentation/hwmon/vexpress rename to Documentation/hwmon/vexpress.rst diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a.rst similarity index 100% rename from Documentation/hwmon/via686a rename to Documentation/hwmon/via686a.rst diff --git a/Documentation/hwmon/vt1211 b/Documentation/hwmon/vt1211.rst similarity index 100% rename from Documentation/hwmon/vt1211 rename to Documentation/hwmon/vt1211.rst diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf.rst similarity index 100% rename from Documentation/hwmon/w83627ehf rename to Documentation/hwmon/w83627ehf.rst diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf.rst similarity index 100% rename from Documentation/hwmon/w83627hf rename to Documentation/hwmon/w83627hf.rst diff --git a/Documentation/hwmon/w83773g b/Documentation/hwmon/w83773g.rst similarity index 100% rename from Documentation/hwmon/w83773g rename to Documentation/hwmon/w83773g.rst diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d.rst similarity index 100% rename from Documentation/hwmon/w83781d rename to Documentation/hwmon/w83781d.rst diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d.rst similarity index 99% rename from Documentation/hwmon/w83791d rename to Documentation/hwmon/w83791d.rst index a91f9e5fb0c6..3adaed39b157 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d.rst @@ -102,7 +102,7 @@ This file is used for both legacy and new code. The sysfs interface to the beep bitmask has migrated from the original legacy method of a single sysfs beep_mask file to a newer method using multiple -`*_beep` files as described in `Documentation/hwmon/sysfs-interface`. +`*_beep` files as described in `Documentation/hwmon/sysfs-interface.rst`. A similar change has occurred for the bitmap corresponding to the alarms. The original legacy method used a single sysfs alarms file containing a bitmap diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d.rst similarity index 100% rename from Documentation/hwmon/w83792d rename to Documentation/hwmon/w83792d.rst diff --git a/Documentation/hwmon/w83793 b/Documentation/hwmon/w83793.rst similarity index 100% rename from Documentation/hwmon/w83793 rename to Documentation/hwmon/w83793.rst diff --git a/Documentation/hwmon/w83795 b/Documentation/hwmon/w83795.rst similarity index 100% rename from Documentation/hwmon/w83795 rename to Documentation/hwmon/w83795.rst diff --git a/Documentation/hwmon/w83l785ts b/Documentation/hwmon/w83l785ts.rst similarity index 100% rename from Documentation/hwmon/w83l785ts rename to Documentation/hwmon/w83l785ts.rst diff --git a/Documentation/hwmon/w83l786ng b/Documentation/hwmon/w83l786ng.rst similarity index 100% rename from Documentation/hwmon/w83l786ng rename to Documentation/hwmon/w83l786ng.rst diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x.rst similarity index 100% rename from Documentation/hwmon/wm831x rename to Documentation/hwmon/wm831x.rst diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350.rst similarity index 100% rename from Documentation/hwmon/wm8350 rename to Documentation/hwmon/wm8350.rst diff --git a/Documentation/hwmon/xgene-hwmon b/Documentation/hwmon/xgene-hwmon.rst similarity index 100% rename from Documentation/hwmon/xgene-hwmon rename to Documentation/hwmon/xgene-hwmon.rst diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100.rst similarity index 98% rename from Documentation/hwmon/zl6100 rename to Documentation/hwmon/zl6100.rst index 4029970bace4..41513bb7fe51 100644 --- a/Documentation/hwmon/zl6100 +++ b/Documentation/hwmon/zl6100.rst @@ -113,7 +113,7 @@ This driver supports hardware monitoring for Intersil / Zilker Labs ZL6100 and compatible digital DC-DC controllers. The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus and Documentation.hwmon/pmbus-core for details +Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details on PMBus client drivers. diff --git a/Documentation/index.rst b/Documentation/index.rst index 80a421cb935e..3a710dc24fc8 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -83,6 +83,7 @@ needed). media/index networking/index input/index + hwmon/index gpu/index security/index sound/index diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 911399730c1c..c3fa500df92c 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -316,7 +316,7 @@ ACPI thermal zones. |---temp[1-*]_input: The current temperature of thermal zone [1-*] |---temp[1-*]_critical: The critical trip point of thermal zone [1-*] -Please read Documentation/hwmon/sysfs-interface for additional information. +Please read Documentation/hwmon/sysfs-interface.rst for additional information. *************************** * Thermal zone attributes * diff --git a/MAINTAINERS b/MAINTAINERS index 349e5d8c3f58..6269c9d671ca 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -468,7 +468,7 @@ ADM1025 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/adm1025 +F: Documentation/hwmon/adm1025.rst F: drivers/hwmon/adm1025.c ADM1029 HARDWARE MONITOR DRIVER @@ -520,7 +520,7 @@ ADS1015 HARDWARE MONITOR DRIVER M: Dirk Eibach L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/ads1015 +F: Documentation/hwmon/ads1015.rst F: drivers/hwmon/ads1015.c F: include/linux/platform_data/ads1015.h @@ -533,7 +533,7 @@ ADT7475 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/adt7475 +F: Documentation/hwmon/adt7475.rst F: drivers/hwmon/adt7475.c ADVANSYS SCSI DRIVER @@ -764,7 +764,7 @@ AMD FAM15H PROCESSOR POWER MONITORING DRIVER M: Huang Rui L: linux-hwmon@vger.kernel.org S: Supported -F: Documentation/hwmon/fam15h_power +F: Documentation/hwmon/fam15h_power.rst F: drivers/hwmon/fam15h_power.c AMD FCH GPIO DRIVER @@ -2531,7 +2531,7 @@ ASC7621 HARDWARE MONITOR DRIVER M: George Joseph L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/asc7621 +F: Documentation/hwmon/asc7621.rst F: drivers/hwmon/asc7621.c ASPEED VIDEO ENGINE DRIVER @@ -4071,7 +4071,7 @@ CORETEMP HARDWARE MONITORING DRIVER M: Fenghua Yu L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/coretemp +F: Documentation/hwmon/coretemp.rst F: drivers/hwmon/coretemp.c COSA/SRP SYNC SERIAL DRIVER @@ -4627,7 +4627,7 @@ DIALOG SEMICONDUCTOR DRIVERS M: Support Opensource W: http://www.dialog-semiconductor.com/products S: Supported -F: Documentation/hwmon/da90?? +F: Documentation/hwmon/da90??.rst F: Documentation/devicetree/bindings/mfd/da90*.txt F: Documentation/devicetree/bindings/input/da90??-onkey.txt F: Documentation/devicetree/bindings/thermal/da90??-thermal.txt @@ -4778,7 +4778,7 @@ DME1737 HARDWARE MONITOR DRIVER M: Juerg Haefliger L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/dme1737 +F: Documentation/hwmon/dme1737.rst F: drivers/hwmon/dme1737.c DMI/SMBIOS SUPPORT @@ -6006,7 +6006,7 @@ F71805F HARDWARE MONITORING DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/f71805f +F: Documentation/hwmon/f71805f.rst F: drivers/hwmon/f71805f.c FADDR2LINE @@ -7687,7 +7687,7 @@ INA209 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/ina209 +F: Documentation/hwmon/ina209.rst F: Documentation/devicetree/bindings/hwmon/ina2xx.txt F: drivers/hwmon/ina209.c @@ -7695,7 +7695,7 @@ INA2XX HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/ina2xx +F: Documentation/hwmon/ina2xx.rst F: drivers/hwmon/ina2xx.c F: include/linux/platform_data/ina2xx.h @@ -8328,7 +8328,7 @@ IT87 HARDWARE MONITORING DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/it87 +F: Documentation/hwmon/it87.rst F: drivers/hwmon/it87.c IT913X MEDIA DRIVER @@ -8372,7 +8372,7 @@ M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained F: drivers/hwmon/jc42.c -F: Documentation/hwmon/jc42 +F: Documentation/hwmon/jc42.rst JFS FILESYSTEM M: Dave Kleikamp @@ -8420,14 +8420,14 @@ K10TEMP HARDWARE MONITORING DRIVER M: Clemens Ladisch L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/k10temp +F: Documentation/hwmon/k10temp.rst F: drivers/hwmon/k10temp.c K8TEMP HARDWARE MONITORING DRIVER M: Rudolf Marek L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/k8temp +F: Documentation/hwmon/k8temp.rst F: drivers/hwmon/k8temp.c KASAN @@ -9118,21 +9118,21 @@ LM78 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/lm78 +F: Documentation/hwmon/lm78.rst F: drivers/hwmon/lm78.c LM83 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/lm83 +F: Documentation/hwmon/lm83.rst F: drivers/hwmon/lm83.c LM90 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/lm90 +F: Documentation/hwmon/lm90.rst F: Documentation/devicetree/bindings/hwmon/lm90.txt F: drivers/hwmon/lm90.c F: include/dt-bindings/thermal/lm90.h @@ -9141,7 +9141,7 @@ LM95234 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/lm95234 +F: Documentation/hwmon/lm95234.rst F: drivers/hwmon/lm95234.c LME2510 MEDIA DRIVER @@ -9214,7 +9214,7 @@ LTC4261 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/ltc4261 +F: Documentation/hwmon/ltc4261.rst F: drivers/hwmon/ltc4261.c LTC4306 I2C MULTIPLEXER DRIVER @@ -9445,7 +9445,7 @@ MAX16065 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/max16065 +F: Documentation/hwmon/max16065.rst F: drivers/hwmon/max16065.c MAX2175 SDR TUNER DRIVER @@ -9461,14 +9461,14 @@ F: include/uapi/linux/max2175.h MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER L: linux-hwmon@vger.kernel.org S: Orphan -F: Documentation/hwmon/max6650 +F: Documentation/hwmon/max6650.rst F: drivers/hwmon/max6650.c MAX6697 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/max6697 +F: Documentation/hwmon/max6697.rst F: Documentation/devicetree/bindings/hwmon/max6697.txt F: drivers/hwmon/max6697.c F: include/linux/platform_data/max6697.h @@ -10118,7 +10118,7 @@ F: drivers/mfd/menf21bmc.c F: drivers/watchdog/menf21bmc_wdt.c F: drivers/leds/leds-menf21bmc.c F: drivers/hwmon/menf21bmc_hwmon.c -F: Documentation/hwmon/menf21bmc +F: Documentation/hwmon/menf21bmc.rst MEN Z069 WATCHDOG DRIVER M: Johannes Thumshirn @@ -10747,7 +10747,7 @@ NCT6775 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/nct6775 +F: Documentation/hwmon/nct6775.rst F: drivers/hwmon/nct6775.c NET_FAILOVER MODULE @@ -11841,7 +11841,7 @@ PC87360 HARDWARE MONITORING DRIVER M: Jim Cromie L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/pc87360 +F: Documentation/hwmon/pc87360.rst F: drivers/hwmon/pc87360.c PC8736x GPIO DRIVER @@ -11853,7 +11853,7 @@ PC87427 HARDWARE MONITORING DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/pc87427 +F: Documentation/hwmon/pc87427.rst F: drivers/hwmon/pc87427.c PCA9532 LED DRIVER @@ -12421,23 +12421,23 @@ S: Maintained F: Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt F: Documentation/devicetree/bindings/hwmon/max31785.txt F: Documentation/devicetree/bindings/hwmon/ltc2978.txt -F: Documentation/hwmon/adm1275 -F: Documentation/hwmon/ibm-cffps -F: Documentation/hwmon/ir35221 -F: Documentation/hwmon/lm25066 -F: Documentation/hwmon/ltc2978 -F: Documentation/hwmon/ltc3815 -F: Documentation/hwmon/max16064 -F: Documentation/hwmon/max20751 -F: Documentation/hwmon/max31785 -F: Documentation/hwmon/max34440 -F: Documentation/hwmon/max8688 -F: Documentation/hwmon/pmbus -F: Documentation/hwmon/pmbus-core -F: Documentation/hwmon/tps40422 -F: Documentation/hwmon/ucd9000 -F: Documentation/hwmon/ucd9200 -F: Documentation/hwmon/zl6100 +F: Documentation/hwmon/adm1275.rst +F: Documentation/hwmon/ibm-cffps.rst +F: Documentation/hwmon/ir35221.rst +F: Documentation/hwmon/lm25066.rst +F: Documentation/hwmon/ltc2978.rst +F: Documentation/hwmon/ltc3815.rst +F: Documentation/hwmon/max16064.rst +F: Documentation/hwmon/max20751.rst +F: Documentation/hwmon/max31785.rst +F: Documentation/hwmon/max34440.rst +F: Documentation/hwmon/max8688.rst +F: Documentation/hwmon/pmbus.rst +F: Documentation/hwmon/pmbus-core.rst +F: Documentation/hwmon/tps40422.rst +F: Documentation/hwmon/ucd9000.rst +F: Documentation/hwmon/ucd9200.rst +F: Documentation/hwmon/zl6100.rst F: drivers/hwmon/pmbus/ F: include/linux/pmbus.h @@ -12701,7 +12701,7 @@ M: Bartlomiej Zolnierkiewicz L: linux-hwmon@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/hwmon/pwm-fan.txt -F: Documentation/hwmon/pwm-fan +F: Documentation/hwmon/pwm-fan.rst F: drivers/hwmon/pwm-fan.c PWM IR Transmitter @@ -14366,21 +14366,21 @@ SMM665 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/smm665 +F: Documentation/hwmon/smm665.rst F: drivers/hwmon/smm665.c SMSC EMC2103 HARDWARE MONITOR DRIVER M: Steve Glendinning L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/emc2103 +F: Documentation/hwmon/emc2103.rst F: drivers/hwmon/emc2103.c SMSC SCH5627 HARDWARE MONITOR DRIVER M: Hans de Goede L: linux-hwmon@vger.kernel.org S: Supported -F: Documentation/hwmon/sch5627 +F: Documentation/hwmon/sch5627.rst F: drivers/hwmon/sch5627.c SMSC UFX6000 and UFX7000 USB to VGA DRIVER @@ -14393,7 +14393,7 @@ SMSC47B397 HARDWARE MONITOR DRIVER M: Jean Delvare L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/smsc47b397 +F: Documentation/hwmon/smsc47b397.rst F: drivers/hwmon/smsc47b397.c SMSC911x ETHERNET DRIVER @@ -15744,7 +15744,7 @@ TMP401 HARDWARE MONITOR DRIVER M: Guenter Roeck L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/tmp401 +F: Documentation/hwmon/tmp401.rst F: drivers/hwmon/tmp401.c TMPFS (SHMEM FILESYSTEM) @@ -16796,7 +16796,7 @@ VT1211 HARDWARE MONITOR DRIVER M: Juerg Haefliger L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/vt1211 +F: Documentation/hwmon/vt1211.rst F: drivers/hwmon/vt1211.c VT8231 HARDWARE MONITOR DRIVER @@ -16824,14 +16824,14 @@ W83791D HARDWARE MONITORING DRIVER M: Marc Hulsman L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/w83791d +F: Documentation/hwmon/w83791d.rst F: drivers/hwmon/w83791d.c W83793 HARDWARE MONITORING DRIVER M: Rudolf Marek L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/hwmon/w83793 +F: Documentation/hwmon/w83793.rst F: drivers/hwmon/w83793.c W83795 HARDWARE MONITORING DRIVER @@ -16940,7 +16940,7 @@ L: patches@opensource.cirrus.com T: git https://github.com/CirrusLogic/linux-drivers.git W: https://github.com/CirrusLogic/linux-drivers/wiki S: Supported -F: Documentation/hwmon/wm83?? +F: Documentation/hwmon/wm83??.rst F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt F: Documentation/devicetree/bindings/mfd/arizona.txt diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index dedd5febd3aa..470ba66b18b0 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -17,7 +17,7 @@ menuconfig HWMON To find out which specific driver(s) you need, use the sensors-detect script from the lm_sensors package. Read - for details. + for details. This support can also be built as a module. If so, the module will be called hwmon. @@ -59,7 +59,7 @@ config SENSORS_ABITUGURU chip can be found on Abit uGuru featuring motherboards (most modern Abit motherboards from before end 2005). For more info and a list of which motherboards have which revision see - Documentation/hwmon/abituguru + Documentation/hwmon/abituguru.rst This driver can also be built as a module. If so, the module will be called abituguru. @@ -73,7 +73,7 @@ config SENSORS_ABITUGURU3 and their settings is supported. The third revision of the Abit uGuru chip can be found on recent Abit motherboards (since end 2005). For more info and a list of which motherboards have which - revision see Documentation/hwmon/abituguru3 + revision see Documentation/hwmon/abituguru3.rst This driver can also be built as a module. If so, the module will be called abituguru3. @@ -643,7 +643,7 @@ config SENSORS_CORETEMP help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs - are supported. Check Documentation/hwmon/coretemp for details. + are supported. Check Documentation/hwmon/coretemp.rst for details. config SENSORS_IT87 tristate "ITE IT87xx and compatibles" diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index e6be617e3fb2..03d6e782777a 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -8,7 +8,7 @@ * * ADS7830 support, by Guillaume Roguez * - * For further information, see the Documentation/hwmon/ads7828 file. + * For further information, see the Documentation/hwmon/ads7828.rst file. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/hwmon/max197.c b/drivers/hwmon/max197.c index 3d9e210beedf..dd6a35219a18 100644 --- a/drivers/hwmon/max197.c +++ b/drivers/hwmon/max197.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/max197 file. + * For further information, see the Documentation/hwmon/max197.rst file. */ #include diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 39b41e35c2bf..7f4a63959730 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -10,7 +10,7 @@ * * Copyright (c) 2007 Wouter Horre * - * For further information, see the Documentation/hwmon/sht15 file. + * For further information, see the Documentation/hwmon/sht15.rst file. */ #include diff --git a/include/linux/platform_data/ads7828.h b/include/linux/platform_data/ads7828.h index 3245f45f9d77..a3370a007702 100644 --- a/include/linux/platform_data/ads7828.h +++ b/include/linux/platform_data/ads7828.h @@ -4,7 +4,7 @@ * Copyright (c) 2012 Savoir-faire Linux Inc. * Vivien Didelot * - * For further information, see the Documentation/hwmon/ads7828 file. + * For further information, see the Documentation/hwmon/ads7828.rst file. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/platform_data/ds620.h b/include/linux/platform_data/ds620.h index 6ef58bb77e46..f0ce22a78bb8 100644 --- a/include/linux/platform_data/ds620.h +++ b/include/linux/platform_data/ds620.h @@ -14,7 +14,7 @@ struct ds620_platform_data { * 1 = PO_LOW * 2 = PO_HIGH * - * (see Documentation/hwmon/ds620) + * (see Documentation/hwmon/ds620.rst) */ int pomode; }; diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h index 9f0aa1b48c78..dde59fd3590f 100644 --- a/include/linux/platform_data/ina2xx.h +++ b/include/linux/platform_data/ina2xx.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/ina2xx file. + * For further information, see the Documentation/hwmon/ina2xx.rst file. */ /** diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h index 8da8f94ee15c..2bbd0919bc89 100644 --- a/include/linux/platform_data/max197.h +++ b/include/linux/platform_data/max197.h @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/hwmon/max197 file. + * For further information, see the Documentation/hwmon/max197.rst file. */ #ifndef _PDATA_MAX197_H diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index ee03d429742b..5fa115d3ea4b 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -42,7 +42,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc_thermistor + * described at Documentation/hwmon/ntc_thermistor.rst * * pullup/down_ohm: 0 for infinite / not-connected *