From patchwork Wed Jul 25 13:44:30 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 10544019 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6D2E414E2 for ; Wed, 25 Jul 2018 13:44:53 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 5E39F2A01C for ; Wed, 25 Jul 2018 13:44:53 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 51D6E2A021; Wed, 25 Jul 2018 13:44:53 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id ECF192A01C for ; Wed, 25 Jul 2018 13:44:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729158AbeGYO4a (ORCPT ); Wed, 25 Jul 2018 10:56:30 -0400 Received: from relay6-d.mail.gandi.net ([217.70.183.198]:55001 "EHLO relay6-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729061AbeGYO4a (ORCPT ); Wed, 25 Jul 2018 10:56:30 -0400 X-Originating-IP: 2.224.242.101 Received: from w540.lan (2-224-242-101.ip172.fastwebnet.it [2.224.242.101]) (Authenticated sender: jacopo@jmondi.org) by relay6-d.mail.gandi.net (Postfix) with ESMTPSA id 51B68C0009; Wed, 25 Jul 2018 13:44:42 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, sakari.ailus@iki.fi, kieran.bingham@ideasonboard.com, robh@kernel.org, devicetree@vger.kernel.org Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Jacopo Mondi Subject: [v2 1/2] dt-bindings: media: i2c: Document MT9V111 bindings Date: Wed, 25 Jul 2018 15:44:30 +0200 Message-Id: <1532526271-19639-2-git-send-email-jacopo@jmondi.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1532526271-19639-1-git-send-email-jacopo@jmondi.org> References: <1532526271-19639-1-git-send-email-jacopo@jmondi.org> Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Jacopo Mondi Add documentation for Aptina MT9V111 image sensor. Reviewed-by: Rob Herring Signed-off-by: Jacopo Mondi --- .../bindings/media/i2c/aptina,mt9v111.txt | 46 ++++++++++++++++++++++ MAINTAINERS | 8 ++++ 2 files changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt -- 2.7.4 diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt new file mode 100644 index 0000000..bd896e9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt @@ -0,0 +1,46 @@ +* Aptina MT9V111 CMOS sensor +---------------------------- + +The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core +based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP). + +The sensor has an active pixel array of 640x480 pixels and can output a number +of image resolution and formats controllable through a simple two-wires +interface. + +Required properties: +-------------------- + +- compatible: shall be "aptina,mt9v111". +- clocks: reference to the system clock input provider. + +Optional properties: +-------------------- + +- enable-gpios: output enable signal, pin name "OE#". Active low. +- standby-gpios: low power state control signal, pin name "STANDBY". + Active high. +- reset-gpios: chip reset signal, pin name "RESET#". Active low. + +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: +-------- + + &i2c1 { + camera@48 { + compatible = "aptina,mt9v111"; + reg = <0x48>; + + clocks = <&camera_clk>; + + port { + mt9v111_out: endpoint { + remote-endpoint = <&ceu_in>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index bbd9b9b..4ab113c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9651,6 +9651,14 @@ F: Documentation/devicetree/bindings/media/i2c/mt9v032.txt F: drivers/media/i2c/mt9v032.c F: include/media/i2c/mt9v032.h +MT9V111 APTINA CAMERA SENSOR +M: Jacopo Mondi +L: linux-media@vger.kernel.org +T: git git://linuxtv.org/media_tree.git +S: Maintained +F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt +F: drivers/media/i2c/mt9v111.c + MULTIFUNCTION DEVICES (MFD) M: Lee Jones T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git From patchwork Wed Jul 25 13:44:31 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jacopo Mondi X-Patchwork-Id: 10544021 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 440C314E2 for ; Wed, 25 Jul 2018 13:44:56 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 2DF1E26247 for ; Wed, 25 Jul 2018 13:44:56 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 2197A2A020; Wed, 25 Jul 2018 13:44:56 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.9 required=2.0 tests=BAYES_00,MAILING_LIST_MULTI, RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 32A3326247 for ; Wed, 25 Jul 2018 13:44:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728990AbeGYO4h (ORCPT ); Wed, 25 Jul 2018 10:56:37 -0400 Received: from relay6-d.mail.gandi.net ([217.70.183.198]:39315 "EHLO relay6-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729061AbeGYO4g (ORCPT ); Wed, 25 Jul 2018 10:56:36 -0400 X-Originating-IP: 2.224.242.101 Received: from w540.lan (2-224-242-101.ip172.fastwebnet.it [2.224.242.101]) (Authenticated sender: jacopo@jmondi.org) by relay6-d.mail.gandi.net (Postfix) with ESMTPSA id 9E8D2C0004; Wed, 25 Jul 2018 13:44:44 +0000 (UTC) From: Jacopo Mondi To: mchehab@kernel.org, sakari.ailus@iki.fi, kieran.bingham@ideasonboard.com Cc: Jacopo Mondi , linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Jacopo Mondi Subject: [v2 2/2] media: i2c: Add driver for Aptina MT9V111 Date: Wed, 25 Jul 2018 15:44:31 +0200 Message-Id: <1532526271-19639-3-git-send-email-jacopo@jmondi.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1532526271-19639-1-git-send-email-jacopo@jmondi.org> References: <1532526271-19639-1-git-send-email-jacopo@jmondi.org> Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Jacopo Mondi Add V4L2 sensor driver for Aptina MT9V111 CMOS image sensor. The MT9V111 is a 1/4-Inch CMOS image sensor based on MT9V011 with an integrated Image Flow Processor. Reviewed-by: Kieran Bingham Signed-off-by: Jacopo Mondi --- drivers/media/i2c/Kconfig | 11 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/mt9v111.c | 1298 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1310 insertions(+) create mode 100644 drivers/media/i2c/mt9v111.c diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 8669853..b6fea81 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -861,6 +861,17 @@ config VIDEO_MT9V032 This is a Video4Linux2 sensor-level driver for the Micron MT9V032 752x480 CMOS sensor. +config VIDEO_MT9V111 + tristate "Aptina MT9V111 sensor support" + depends on I2C && VIDEO_V4L2 + depends on MEDIA_CAMERA_SUPPORT + help + This is a Video4Linux2 sensor driver for the Aptina/Micron + MT9V111 sensor. + + To compile this driver as a module, choose M here: the + module will be called mt9v111. + config VIDEO_SR030PC30 tristate "Siliconfile SR030PC30 sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 837c428..ba9a1e4 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o obj-$(CONFIG_VIDEO_MT9T112) += mt9t112.o obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o +obj-$(CONFIG_VIDEO_MT9V111) += mt9v111.o obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o obj-$(CONFIG_VIDEO_RJ54N1) += rj54n1cb0c.o diff --git a/drivers/media/i2c/mt9v111.c b/drivers/media/i2c/mt9v111.c new file mode 100644 index 0000000..da8f6ab --- /dev/null +++ b/drivers/media/i2c/mt9v111.c @@ -0,0 +1,1298 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * V4L2 sensor driver for Aptina MT9V111 image sensor + * Copyright (C) 2018 Jacopo Mondi + * + * Based on mt9v032 driver + * Copyright (C) 2010, Laurent Pinchart + * Copyright (C) 2008, Guennadi Liakhovetski + * + * Based on mt9v011 driver + * Copyright (c) 2009 Mauro Carvalho Chehab + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * MT9V111 is a 1/4-Inch CMOS digital image sensor with an integrated + * Image Flow Processing (IFP) engine and a sensor core loosely based on + * MT9V011. + * + * The IFP can produce several output image formats from the sensor core + * output. This driver currently supports only YUYV format permutations. + * + * The driver allows manual frame rate control through s_frame_interval subdev + * operation or V4L2_CID_V/HBLANK controls, but it is known that the + * auto-exposure algorithm might modify the programmed frame rate. While the + * driver initially programs the sensor with auto-exposure and + * auto-white-balancing enabled, it is possible to disable them and more + * precisely control the frame rate. + * + * While it seems possible to instruct the auto-exposure control algorithm to + * respect a programmed frame rate when adjusting the pixel integration time, + * registers controlling this feature are not documented in the public + * available sensor manual used to develop this driver (09005aef80e90084, + * MT9V111_1.fm - Rev. G 1/05 EN). + */ + +#define MT9V111_CHIP_ID_HIGH 0x82 +#define MT9V111_CHIP_ID_LOW 0x3a + +#define MT9V111_R01_ADDR_SPACE 0x01 +#define MT9V111_R01_IFP 0x01 +#define MT9V111_R01_CORE 0x04 + +#define MT9V111_IFP_R06_OPMODE_CTRL 0x06 +#define MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN BIT(1) +#define MT9V111_IFP_R06_OPMODE_CTRL_AE_EN BIT(14) +#define MT9V111_IFP_R07_IFP_RESET 0x07 +#define MT9V111_IFP_R07_IFP_RESET_MASK BIT(0) +#define MT9V111_IFP_R08_OUTFMT_CTRL 0x08 +#define MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER BIT(11) +#define MT9V111_IFP_R08_OUTFMT_CTRL_PCLK BIT(5) +#define MT9V111_IFP_R3A_OUTFMT_CTRL2 0x3a +#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR BIT(0) +#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC BIT(1) +#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_MASK GENMASK(2, 0) +#define MT9V111_IFP_RA5_HPAN 0xa5 +#define MT9V111_IFP_RA6_HZOOM 0xa6 +#define MT9V111_IFP_RA7_HOUT 0xa7 +#define MT9V111_IFP_RA8_VPAN 0xa8 +#define MT9V111_IFP_RA9_VZOOM 0xa9 +#define MT9V111_IFP_RAA_VOUT 0xaa +#define MT9V111_IFP_DECIMATION_MASK GENMASK(9, 0) +#define MT9V111_IFP_DECIMATION_FREEZE BIT(15) + +#define MT9V111_CORE_R03_WIN_HEIGHT 0x03 +#define MT9V111_CORE_R03_WIN_V_OFFS 2 +#define MT9V111_CORE_R04_WIN_WIDTH 0x04 +#define MT9V111_CORE_R04_WIN_H_OFFS 114 +#define MT9V111_CORE_R05_HBLANK 0x05 +#define MT9V111_CORE_R05_MIN_HBLANK 0x09 +#define MT9V111_CORE_R05_MAX_HBLANK GENMASK(9, 0) +#define MT9V111_CORE_R05_DEF_HBLANK 0x26 +#define MT9V111_CORE_R06_VBLANK 0x06 +#define MT9V111_CORE_R06_MIN_VBLANK 0x03 +#define MT9V111_CORE_R06_MAX_VBLANK GENMASK(11, 0) +#define MT9V111_CORE_R06_DEF_VBLANK 0x04 +#define MT9V111_CORE_R07_OUT_CTRL 0x07 +#define MT9V111_CORE_R07_OUT_CTRL_SAMPLE BIT(4) +#define MT9V111_CORE_R09_PIXEL_INT 0x09 +#define MT9V111_CORE_R09_PIXEL_INT_MASK GENMASK(11, 0) +#define MT9V111_CORE_R0D_CORE_RESET 0x0d +#define MT9V111_CORE_R0D_CORE_RESET_MASK BIT(0) +#define MT9V111_CORE_RFF_CHIP_VER 0xff + +#define MT9V111_PIXEL_ARRAY_WIDTH 640 +#define MT9V111_PIXEL_ARRAY_HEIGHT 480 + +#define MT9V111_MAX_CLKIN 27000000 + +/* The default sensor configuration at startup time. */ +static struct v4l2_mbus_framefmt mt9v111_def_fmt = { + .width = 640, + .height = 480, + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_SRGB, +}; + +struct mt9v111_dev { + struct device *dev; + struct i2c_client *client; + + u8 addr_space; + + struct v4l2_subdev sd; +#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) + struct media_pad pad; +#endif + + struct v4l2_ctrl *auto_awb; + struct v4l2_ctrl *auto_exp; + struct v4l2_ctrl *hblank; + struct v4l2_ctrl *vblank; + struct v4l2_ctrl_handler ctrls; + + /* Output image format and sizes. */ + struct v4l2_mbus_framefmt fmt; + unsigned int fps; + + /* Protects power up/down sequences. */ + struct mutex pwr_mutex; + int pwr_count; + + /* Protects stream on/off sequences. */ + struct mutex stream_mutex; + bool streaming; + + /* Flags to mark HW settings as not yet applied. */ + bool pending; + + /* Clock provider and system clock frequency. */ + struct clk *clk; + u32 sysclk; + + struct gpio_desc *oe; + struct gpio_desc *standby; + struct gpio_desc *reset; +}; + +#define sd_to_mt9v111(__sd) container_of((__sd), struct mt9v111_dev, sd) + +/* + * mt9v111_mbus_fmt - List all media bus formats supported by the driver. + * + * Only list the media bus code here. The image sizes are freely configurable + * in the pixel array sizes range. + * + * The desired frame interval, in the supported frame interval range, is + * obtained by configuring blanking as the sensor does not have a PLL but + * only a fixed clock divider that generates the output pixel clock. + */ +static struct mt9v111_mbus_fmt { + u32 code; +} mt9v111_formats[] = { + { + .code = MEDIA_BUS_FMT_UYVY8_2X8, + }, + { + .code = MEDIA_BUS_FMT_YUYV8_2X8, + }, + { + .code = MEDIA_BUS_FMT_VYUY8_2X8, + }, + { + .code = MEDIA_BUS_FMT_YVYU8_2X8, + }, +}; + +static u32 mt9v111_frame_intervals[] = {5, 10, 15, 20, 30}; + +/* + * mt9v111_frame_sizes - List sensor's supported resolutions. + * + * Resolution generated through decimation in the IFP block from the + * full VGA pixel array. + */ +static struct v4l2_rect mt9v111_frame_sizes[] = { + { + .width = 640, + .height = 480, + }, + { + .width = 352, + .height = 288 + }, + { + .width = 320, + .height = 240, + }, + { + .width = 176, + .height = 144, + }, + { + .width = 160, + .height = 120, + }, +}; + +/* --- Device I/O access --- */ + +static int __mt9v111_read(struct i2c_client *c, u8 reg, u16 *val) +{ + struct i2c_msg msg[2]; + __be16 buf; + int ret; + + msg[0].addr = c->addr; + msg[0].flags = 0; + msg[0].len = 1; + msg[0].buf = ® + + msg[1].addr = c->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = 2; + msg[1].buf = (char *)&buf; + + ret = i2c_transfer(c->adapter, msg, 2); + if (ret < 0) { + dev_err(&c->dev, "i2c read transfer error: %d\n", ret); + return ret; + } + + *val = be16_to_cpu(buf); + + dev_dbg(&c->dev, "%s: %x=%x\n", __func__, reg, *val); + + return 0; +} + +static int __mt9v111_write(struct i2c_client *c, u8 reg, u16 val) +{ + struct i2c_msg msg; + u8 buf[3] = { 0 }; + int ret; + + buf[0] = reg; + buf[1] = val >> 8; + buf[2] = val & 0xff; + + msg.addr = c->addr; + msg.flags = 0; + msg.len = 3; + msg.buf = (char *)buf; + + dev_dbg(&c->dev, "%s: %x = %x%x\n", __func__, reg, buf[1], buf[2]); + + ret = i2c_transfer(c->adapter, &msg, 1); + if (ret < 0) { + dev_err(&c->dev, "i2c write transfer error: %d\n", ret); + return ret; + } + + return 0; +} + +static int __mt9v111_addr_space_select(struct i2c_client *c, u16 addr_space) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(c); + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); + u16 val; + int ret; + + if (mt9v111->addr_space == addr_space) + return 0; + + ret = __mt9v111_write(c, MT9V111_R01_ADDR_SPACE, addr_space); + if (ret) + return ret; + + /* Verify address space has been updated */ + ret = __mt9v111_read(c, MT9V111_R01_ADDR_SPACE, &val); + if (ret) + return ret; + + if (val != addr_space) + return -EINVAL; + + mt9v111->addr_space = addr_space; + + return 0; +} + +static int mt9v111_read(struct i2c_client *c, u8 addr_space, u8 reg, u16 *val) +{ + int ret; + + /* Select register address space first. */ + ret = __mt9v111_addr_space_select(c, addr_space); + if (ret) + return ret; + + ret = __mt9v111_read(c, reg, val); + if (ret) + return ret; + + return 0; +} + +static int mt9v111_write(struct i2c_client *c, u8 addr_space, u8 reg, u16 val) +{ + int ret; + + /* Select register address space first. */ + ret = __mt9v111_addr_space_select(c, addr_space); + if (ret) + return ret; + + ret = __mt9v111_write(c, reg, val); + if (ret) + return ret; + + return 0; +} + +static int mt9v111_update(struct i2c_client *c, u8 addr_space, u8 reg, + u16 mask, u16 val) +{ + u16 current_val; + int ret; + + /* Select register address space first. */ + ret = __mt9v111_addr_space_select(c, addr_space); + if (ret) + return ret; + + /* Read the current register value, then update it. */ + ret = __mt9v111_read(c, reg, ¤t_val); + if (ret) + return ret; + + current_val &= ~mask; + current_val |= (val & mask); + ret = __mt9v111_write(c, reg, current_val); + if (ret) + return ret; + + return 0; +} + +/* --- Sensor HW operations --- */ + +static int __mt9v111_power_on(struct v4l2_subdev *sd) +{ + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); + int ret; + + ret = clk_prepare_enable(mt9v111->clk); + if (ret) + return ret; + + clk_set_rate(mt9v111->clk, mt9v111->sysclk); + + gpiod_set_value(mt9v111->standby, 0); + usleep_range(500, 1000); + + gpiod_set_value(mt9v111->oe, 1); + usleep_range(500, 1000); + + return 0; +} + +static int __mt9v111_power_off(struct v4l2_subdev *sd) +{ + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); + + gpiod_set_value(mt9v111->oe, 0); + usleep_range(500, 1000); + + gpiod_set_value(mt9v111->standby, 1); + usleep_range(500, 1000); + + clk_disable_unprepare(mt9v111->clk); + + return 0; +} + +static int __mt9v111_hw_reset(struct mt9v111_dev *mt9v111) +{ + if (!mt9v111->reset) + return -EINVAL; + + gpiod_set_value(mt9v111->reset, 1); + usleep_range(500, 1000); + + gpiod_set_value(mt9v111->reset, 0); + usleep_range(500, 1000); + + return 0; +} + +static int __mt9v111_sw_reset(struct mt9v111_dev *mt9v111) +{ + struct i2c_client *c = mt9v111->client; + int ret; + + /* Software reset core and IFP blocks. */ + + ret = mt9v111_update(c, MT9V111_R01_CORE, + MT9V111_CORE_R0D_CORE_RESET, + MT9V111_CORE_R0D_CORE_RESET_MASK, 1); + if (ret) + return ret; + usleep_range(500, 1000); + + ret = mt9v111_update(c, MT9V111_R01_CORE, + MT9V111_CORE_R0D_CORE_RESET, + MT9V111_CORE_R0D_CORE_RESET_MASK, 0); + if (ret) + return ret; + usleep_range(500, 1000); + + ret = mt9v111_update(c, MT9V111_R01_IFP, + MT9V111_IFP_R07_IFP_RESET, + MT9V111_IFP_R07_IFP_RESET_MASK, 1); + if (ret) + return ret; + usleep_range(500, 1000); + + ret = mt9v111_update(c, MT9V111_R01_IFP, + MT9V111_IFP_R07_IFP_RESET, + MT9V111_IFP_R07_IFP_RESET_MASK, 0); + if (ret) + return ret; + usleep_range(500, 1000); + + return 0; +} + +static int mt9v111_calc_frame_rate(struct mt9v111_dev *mt9v111, + struct v4l2_fract *tpf) +{ + unsigned int fps = tpf->numerator ? + tpf->denominator / tpf->numerator : + tpf->denominator; + unsigned int best_diff; + unsigned int frm_cols; + unsigned int row_pclk; + unsigned int best_fps; + unsigned int pclk; + unsigned int diff; + unsigned int idx; + unsigned int hb; + unsigned int vb; + unsigned int i; + int ret; + + /* Approximate to the closest supported frame interval. */ + best_diff = ~0L; + for (i = 0, idx = 0; i < ARRAY_SIZE(mt9v111_frame_intervals); i++) { + diff = abs(fps - mt9v111_frame_intervals[i]); + if (diff < best_diff) { + idx = i; + best_diff = diff; + } + } + fps = mt9v111_frame_intervals[idx]; + + /* + * The sensor does not provide a PLL circuitry and pixel clock is + * generated dividing the master clock source by two. + * + * Trow = (W + Hblank + 114) * 2 * (1 / SYSCLK) + * TFrame = Trow * (H + Vblank + 2) + * + * FPS = (SYSCLK / 2) / (Trow * (H + Vblank + 2)) + * + * This boils down to tune H and V blanks to best approximate the + * above equation. + * + * Test all available H/V blank values, until we reach the + * desired frame rate. + */ + best_fps = vb = hb = 0; + pclk = DIV_ROUND_CLOSEST(mt9v111->sysclk, 2); + row_pclk = MT9V111_PIXEL_ARRAY_WIDTH + 7 + MT9V111_CORE_R04_WIN_H_OFFS; + frm_cols = MT9V111_PIXEL_ARRAY_HEIGHT + 7 + MT9V111_CORE_R03_WIN_V_OFFS; + + best_diff = ~0L; + for (vb = MT9V111_CORE_R06_MIN_VBLANK; + vb < MT9V111_CORE_R06_MAX_VBLANK; vb++) { + for (hb = MT9V111_CORE_R05_MIN_HBLANK; + hb < MT9V111_CORE_R05_MAX_HBLANK; hb += 10) { + unsigned int t_frame = (row_pclk + hb) * + (frm_cols + vb); + unsigned int t_fps = DIV_ROUND_CLOSEST(pclk, t_frame); + + diff = abs(fps - t_fps); + if (diff < best_diff) { + best_diff = diff; + best_fps = t_fps; + + if (diff == 0) + break; + } + } + + if (diff == 0) + break; + } + + ret = v4l2_ctrl_s_ctrl_int64(mt9v111->hblank, hb); + if (ret) + return ret; + + ret = v4l2_ctrl_s_ctrl_int64(mt9v111->vblank, vb); + if (ret) + return ret; + + tpf->numerator = 1; + tpf->denominator = best_fps; + + return 0; +} + +static int mt9v111_hw_config(struct mt9v111_dev *mt9v111) +{ + struct i2c_client *c = mt9v111->client; + unsigned int ret; + u16 outfmtctrl2; + + /* Force device reset. */ + ret = __mt9v111_hw_reset(mt9v111); + if (ret == -EINVAL) + ret = __mt9v111_sw_reset(mt9v111); + if (ret) + return ret; + + /* Configure internal clock sample rate. */ + ret = mt9v111->sysclk < DIV_ROUND_CLOSEST(MT9V111_MAX_CLKIN, 2) ? + mt9v111_update(c, MT9V111_R01_CORE, + MT9V111_CORE_R07_OUT_CTRL, + MT9V111_CORE_R07_OUT_CTRL_SAMPLE, 1) : + mt9v111_update(c, MT9V111_R01_CORE, + MT9V111_CORE_R07_OUT_CTRL, + MT9V111_CORE_R07_OUT_CTRL_SAMPLE, 0); + if (ret) + return ret; + + /* + * Configure output image format components ordering. + * + * TODO: IFP block can also output several RGB permutations, we only + * support YUYV permutations at the moment. + */ + switch (mt9v111->fmt.code) { + case MEDIA_BUS_FMT_YUYV8_2X8: + outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC; + break; + case MEDIA_BUS_FMT_VYUY8_2X8: + outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR; + break; + case MEDIA_BUS_FMT_YVYU8_2X8: + outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC | + MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR; + break; + case MEDIA_BUS_FMT_UYVY8_2X8: + default: + outfmtctrl2 = 0; + break; + } + + ret = mt9v111_update(c, MT9V111_R01_IFP, MT9V111_IFP_R3A_OUTFMT_CTRL2, + MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_MASK, + outfmtctrl2); + if (ret) + return ret; + + /* + * Do not change default sensor's core configuration: + * output the whole 640x480 pixel array, skip 18 columns and 6 rows. + * + * Instead, control the output image size through IFP block. + * + * TODO: No zoom&pan support. Currently we control the output image + * size only through decimation, with no zoom support. + */ + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA5_HPAN, + MT9V111_IFP_DECIMATION_FREEZE); + if (ret) + return ret; + + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA8_VPAN, + MT9V111_IFP_DECIMATION_FREEZE); + if (ret) + return ret; + + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA6_HZOOM, + MT9V111_IFP_DECIMATION_FREEZE | + MT9V111_PIXEL_ARRAY_WIDTH); + if (ret) + return ret; + + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA9_VZOOM, + MT9V111_IFP_DECIMATION_FREEZE | + MT9V111_PIXEL_ARRAY_HEIGHT); + if (ret) + return ret; + + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA7_HOUT, + MT9V111_IFP_DECIMATION_FREEZE | + mt9v111->fmt.width); + if (ret) + return ret; + + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RAA_VOUT, + mt9v111->fmt.height); + if (ret) + return ret; + + /* Apply controls to set auto exp, auto awb and timings */ + ret = v4l2_ctrl_handler_setup(&mt9v111->ctrls); + if (ret) + return ret; + + /* + * Set pixel integration time to the whole frame time. + * This value controls the the shutter delay when running with AE + * disabled. If longer than frame time, it affects the output + * frame rate. + */ + return mt9v111_write(c, MT9V111_R01_CORE, MT9V111_CORE_R09_PIXEL_INT, + MT9V111_PIXEL_ARRAY_HEIGHT); +} + +/* --- V4L2 subdev operations --- */ + +static int mt9v111_s_power(struct v4l2_subdev *sd, int on) +{ + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); + int pwr_count; + int ret = 0; + + mutex_lock(&mt9v111->pwr_mutex); + + /* + * Make sure we're transitioning from 0 to 1, or viceversa, + * before actually changing the power state. + */ + pwr_count = mt9v111->pwr_count; + pwr_count += on ? 1 : -1; + if (pwr_count == !!on) { + ret = on ? __mt9v111_power_on(sd) : + __mt9v111_power_off(sd); + if (!ret) + /* All went well, updated power counter. */ + mt9v111->pwr_count = pwr_count; + + mutex_unlock(&mt9v111->pwr_mutex); + + return ret; + } + + /* + * Update power counter to keep track of how many nested calls we + * received. + */ + WARN_ON(pwr_count < 0 || pwr_count > 1); + mt9v111->pwr_count = pwr_count; + + mutex_unlock(&mt9v111->pwr_mutex); + + return ret; +} + +static int mt9v111_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev); + int ret; + + mutex_lock(&mt9v111->stream_mutex); + + if (mt9v111->streaming == enable) { + mutex_unlock(&mt9v111->stream_mutex); + return 0; + } + + ret = mt9v111_s_power(subdev, enable); + if (ret) + goto error_unlock; + + if (enable && mt9v111->pending) { + ret = mt9v111_hw_config(mt9v111); + if (ret) + goto error_unlock; + + /* + * No need to update control here as far as only H/VBLANK are + * supported and immediately programmed to registers in .s_ctrl + */ + + mt9v111->pending = false; + } + + mt9v111->streaming = enable ? true : false; + mutex_unlock(&mt9v111->stream_mutex); + + return 0; + +error_unlock: + mutex_unlock(&mt9v111->stream_mutex); + + return ret; +} + +static int mt9v111_s_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *ival) +{ + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); + struct v4l2_fract *tpf = &ival->interval; + unsigned int fps = tpf->numerator ? + tpf->denominator / tpf->numerator : + tpf->denominator; + unsigned int max_fps; + + if (!tpf->numerator) + tpf->numerator = 1; + + mutex_lock(&mt9v111->stream_mutex); + + if (mt9v111->streaming) { + mutex_unlock(&mt9v111->stream_mutex); + return -EBUSY; + } + + if (mt9v111->fps == fps) { + mutex_unlock(&mt9v111->stream_mutex); + return 0; + } + + /* Make sure frame rate/image sizes constraints are respected. */ + if (mt9v111->fmt.width < QVGA_WIDTH && + mt9v111->fmt.height < QVGA_HEIGHT) + max_fps = 90; + else if (mt9v111->fmt.width < CIF_WIDTH && + mt9v111->fmt.height < CIF_HEIGHT) + max_fps = 60; + else + max_fps = mt9v111->sysclk < + DIV_ROUND_CLOSEST(MT9V111_MAX_CLKIN, 2) ? 15 : + 30; + + if (fps > max_fps) { + mutex_unlock(&mt9v111->stream_mutex); + return -EINVAL; + } + + mt9v111_calc_frame_rate(mt9v111, tpf); + + mt9v111->fps = fps; + mt9v111->pending = true; + + mutex_unlock(&mt9v111->stream_mutex); + + return 0; +} + +static int mt9v111_g_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *ival) +{ + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); + struct v4l2_fract *tpf = &ival->interval; + + mutex_lock(&mt9v111->stream_mutex); + + tpf->numerator = 1; + tpf->denominator = mt9v111->fps; + + mutex_unlock(&mt9v111->stream_mutex); + + return 0; +} + +static struct v4l2_mbus_framefmt *__mt9v111_get_pad_format( + struct mt9v111_dev *mt9v111, + struct v4l2_subdev_pad_config *cfg, + unsigned int pad, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: +#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) + return v4l2_subdev_get_try_format(&mt9v111->sd, cfg, pad); +#else + return &cfg->try_fmt; +#endif + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9v111->fmt; + default: + return NULL; + } +} + +static int mt9v111_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->pad || code->index > ARRAY_SIZE(mt9v111_formats) - 1) + return -EINVAL; + + code->code = mt9v111_formats[code->index].code; + + return 0; +} + +static int mt9v111_enum_frame_interval(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_interval_enum *fie) +{ + unsigned int i; + + if (fie->pad || fie->index >= ARRAY_SIZE(mt9v111_frame_intervals)) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(mt9v111_frame_sizes); i++) + if (fie->width == mt9v111_frame_sizes[i].width && + fie->height == mt9v111_frame_sizes[i].height) + break; + + if (i == ARRAY_SIZE(mt9v111_frame_sizes)) + return -EINVAL; + + fie->interval.numerator = 1; + fie->interval.denominator = mt9v111_frame_intervals[fie->index]; + + return 0; +} + +static int mt9v111_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->pad || fse->index > ARRAY_SIZE(mt9v111_frame_sizes)) + return -EINVAL; + + fse->min_width = mt9v111_frame_sizes[fse->index].width; + fse->max_width = mt9v111_frame_sizes[fse->index].width; + fse->min_height = mt9v111_frame_sizes[fse->index].height; + fse->max_height = mt9v111_frame_sizes[fse->index].height; + + return 0; +} + +static int mt9v111_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev); + + if (format->pad) + return -EINVAL; + + mutex_lock(&mt9v111->stream_mutex); + format->format = *__mt9v111_get_pad_format(mt9v111, cfg, format->pad, + format->which); + mutex_unlock(&mt9v111->stream_mutex); + + return 0; +} + +static int mt9v111_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev); + struct v4l2_mbus_framefmt new_fmt; + struct v4l2_mbus_framefmt *__fmt; + unsigned int best_fit = ~0L; + unsigned int idx; + unsigned int i; + + mutex_lock(&mt9v111->stream_mutex); + if (mt9v111->streaming) { + mutex_unlock(&mt9v111->stream_mutex); + return -EBUSY; + } + + if (format->pad) { + mutex_unlock(&mt9v111->stream_mutex); + return -EINVAL; + } + + /* Update mbus format code and sizes. */ + for (i = 0; i < ARRAY_SIZE(mt9v111_formats); i++) { + if (format->format.code == mt9v111_formats[i].code) { + new_fmt.code = mt9v111_formats[i].code; + break; + } + } + if (i == ARRAY_SIZE(mt9v111_formats)) + new_fmt.code = mt9v111_formats[0].code; + + for (i = 0; i < ARRAY_SIZE(mt9v111_frame_sizes); i++) { + unsigned int fit = abs(mt9v111_frame_sizes[i].width - + format->format.width) + + abs(mt9v111_frame_sizes[i].height - + format->format.height); + if (fit < best_fit) { + best_fit = fit; + idx = i; + + if (fit == 0) + break; + } + } + new_fmt.width = mt9v111_frame_sizes[idx].width; + new_fmt.height = mt9v111_frame_sizes[idx].height; + + /* Update the device (or pad) format if it has changed. */ + __fmt = __mt9v111_get_pad_format(mt9v111, cfg, format->pad, + format->which); + + /* Format hasn't changed, stop here. */ + if (__fmt->code == new_fmt.code && + __fmt->width == new_fmt.width && + __fmt->height == new_fmt.height) + goto done; + + /* Update the format and sizes, then mark changes as pending. */ + __fmt->code = new_fmt.code; + __fmt->width = new_fmt.width; + __fmt->height = new_fmt.height; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + mt9v111->pending = true; + + dev_dbg(mt9v111->dev, "%s: mbus_code: %x - (%ux%u)\n", + __func__, __fmt->code, __fmt->width, __fmt->height); + +done: + format->format = *__fmt; + + mutex_unlock(&mt9v111->stream_mutex); + + return 0; +} + +static int mt9v111_init_cfg(struct v4l2_subdev *subdev, + struct v4l2_subdev_pad_config *cfg) +{ + cfg->try_fmt = mt9v111_def_fmt; + + return 0; +} + +static const struct v4l2_subdev_core_ops mt9v111_core_ops = { + .s_power = mt9v111_s_power, +}; + +static const struct v4l2_subdev_video_ops mt9v111_video_ops = { + .s_stream = mt9v111_s_stream, + .s_frame_interval = mt9v111_s_frame_interval, + .g_frame_interval = mt9v111_g_frame_interval, +}; + +static const struct v4l2_subdev_pad_ops mt9v111_pad_ops = { + .init_cfg = mt9v111_init_cfg, + .enum_mbus_code = mt9v111_enum_mbus_code, + .enum_frame_size = mt9v111_enum_frame_size, + .enum_frame_interval = mt9v111_enum_frame_interval, + .get_fmt = mt9v111_get_format, + .set_fmt = mt9v111_set_format, +}; + +static const struct v4l2_subdev_ops mt9v111_ops = { + .core = &mt9v111_core_ops, + .video = &mt9v111_video_ops, + .pad = &mt9v111_pad_ops, +}; + +#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) +static const struct media_entity_operations mt9v111_subdev_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; +#endif + +/* --- V4L2 ctrl --- */ +static int mt9v111_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct mt9v111_dev *mt9v111 = container_of(ctrl->handler, + struct mt9v111_dev, + ctrls); + int ret; + + mutex_lock(&mt9v111->pwr_mutex); + /* + * If sensor is powered down, just cache new control values, + * no actual register access. + */ + if (!mt9v111->pwr_count) { + mt9v111->pending = true; + mutex_unlock(&mt9v111->pwr_mutex); + return 0; + } + mutex_unlock(&mt9v111->pwr_mutex); + + /* + * Flickering control gets disabled if both auto exp and auto awb + * are disabled too. If any of the two is enabled, enable it. + * + * Disabling flickering when ae and awb are off allows a more precise + * control of the programmed frame rate. + */ + if (mt9v111->auto_exp->is_new || mt9v111->auto_awb->is_new) { + if (mt9v111->auto_exp->val == V4L2_EXPOSURE_MANUAL && + mt9v111->auto_awb->val == V4L2_WHITE_BALANCE_MANUAL) + ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP, + MT9V111_IFP_R08_OUTFMT_CTRL, + MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER, + 0); + else + ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP, + MT9V111_IFP_R08_OUTFMT_CTRL, + MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER, + 1); + if (ret) + return ret; + } + + ret = -EINVAL; + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP, + MT9V111_IFP_R06_OPMODE_CTRL, + MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN, + ctrl->val == V4L2_WHITE_BALANCE_AUTO ? + MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN : 0); + break; + case V4L2_CID_EXPOSURE_AUTO: + ret = mt9v111_update(mt9v111->client, MT9V111_R01_IFP, + MT9V111_IFP_R06_OPMODE_CTRL, + MT9V111_IFP_R06_OPMODE_CTRL_AE_EN, + ctrl->val == V4L2_EXPOSURE_AUTO ? + MT9V111_IFP_R06_OPMODE_CTRL_AE_EN : 0); + break; + case V4L2_CID_HBLANK: + ret = mt9v111_update(mt9v111->client, MT9V111_R01_CORE, + MT9V111_CORE_R05_HBLANK, + MT9V111_CORE_R05_MAX_HBLANK, + mt9v111->hblank->val); + break; + case V4L2_CID_VBLANK: + ret = mt9v111_update(mt9v111->client, MT9V111_R01_CORE, + MT9V111_CORE_R06_VBLANK, + MT9V111_CORE_R06_MAX_VBLANK, + mt9v111->vblank->val); + break; + } + + return ret; +} + +static const struct v4l2_ctrl_ops mt9v111_ctrl_ops = { + .s_ctrl = mt9v111_s_ctrl, +}; + +static int mt9v111_chip_probe(struct mt9v111_dev *mt9v111) +{ + int ret; + u16 val; + + ret = __mt9v111_power_on(&mt9v111->sd); + if (ret) + return ret; + + ret = mt9v111_read(mt9v111->client, MT9V111_R01_CORE, + MT9V111_CORE_RFF_CHIP_VER, &val); + if (ret) + goto power_off; + + if ((val >> 8) != MT9V111_CHIP_ID_HIGH && + (val & 0xff) != MT9V111_CHIP_ID_LOW) { + dev_err(mt9v111->dev, + "Unable to identify MT9V111 chip: 0x%2x%2x\n", + val >> 8, val & 0xff); + ret = -EIO; + goto power_off; + } + + dev_dbg(mt9v111->dev, "Chip identified: 0x%2x%2x\n", + val >> 8, val & 0xff); + +power_off: + __mt9v111_power_off(&mt9v111->sd); + + return ret; +} + +static int mt9v111_probe(struct i2c_client *client) +{ + struct mt9v111_dev *mt9v111; + struct v4l2_fract tpf; + int ret; + + mt9v111 = devm_kzalloc(&client->dev, sizeof(*mt9v111), GFP_KERNEL); + if (!mt9v111) + return -ENOMEM; + + mt9v111->dev = &client->dev; + mt9v111->client = client; + + mt9v111->clk = devm_clk_get(&client->dev, NULL); + if (IS_ERR(mt9v111->clk)) + return PTR_ERR(mt9v111->clk); + + mt9v111->sysclk = clk_get_rate(mt9v111->clk); + if (mt9v111->sysclk > MT9V111_MAX_CLKIN) + return -EINVAL; + + mt9v111->oe = devm_gpiod_get_optional(&client->dev, "enable", + GPIOD_OUT_LOW); + if (IS_ERR(mt9v111->oe)) { + dev_err(&client->dev, "Unable to get GPIO \"enable\": %ld\n", + PTR_ERR(mt9v111->oe)); + return PTR_ERR(mt9v111->oe); + } + + mt9v111->standby = devm_gpiod_get_optional(&client->dev, "standby", + GPIOD_OUT_HIGH); + if (IS_ERR(mt9v111->standby)) { + dev_err(&client->dev, "Unable to get GPIO \"standby\": %ld\n", + PTR_ERR(mt9v111->standby)); + return PTR_ERR(mt9v111->standby); + } + + mt9v111->reset = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(mt9v111->reset)) { + dev_err(&client->dev, "Unable to get GPIO \"reset\": %ld\n", + PTR_ERR(mt9v111->reset)); + return PTR_ERR(mt9v111->reset); + } + + mutex_init(&mt9v111->pwr_mutex); + mutex_init(&mt9v111->stream_mutex); + + v4l2_ctrl_handler_init(&mt9v111->ctrls, 5); + + mt9v111->auto_awb = v4l2_ctrl_new_std(&mt9v111->ctrls, + &mt9v111_ctrl_ops, + V4L2_CID_AUTO_WHITE_BALANCE, + 0, 1, 1, + V4L2_WHITE_BALANCE_AUTO); + if (IS_ERR_OR_NULL(mt9v111->auto_awb)) { + ret = PTR_ERR(mt9v111->auto_awb); + goto error_free_ctrls; + } + + mt9v111->auto_exp = v4l2_ctrl_new_std_menu(&mt9v111->ctrls, + &mt9v111_ctrl_ops, + V4L2_CID_EXPOSURE_AUTO, + V4L2_EXPOSURE_MANUAL, + 0, V4L2_EXPOSURE_AUTO); + if (IS_ERR_OR_NULL(mt9v111->auto_exp)) { + ret = PTR_ERR(mt9v111->auto_exp); + goto error_free_ctrls; + } + + /* Initialize timings */ + mt9v111->hblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, + V4L2_CID_HBLANK, + MT9V111_CORE_R05_MIN_HBLANK, + MT9V111_CORE_R05_MAX_HBLANK, 1, + MT9V111_CORE_R05_DEF_HBLANK); + if (IS_ERR_OR_NULL(mt9v111->hblank)) { + ret = PTR_ERR(mt9v111->hblank); + goto error_free_ctrls; + } + + mt9v111->vblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, + V4L2_CID_VBLANK, + MT9V111_CORE_R06_MIN_VBLANK, + MT9V111_CORE_R06_MAX_VBLANK, 1, + MT9V111_CORE_R06_DEF_VBLANK); + if (IS_ERR_OR_NULL(mt9v111->vblank)) { + ret = PTR_ERR(mt9v111->vblank); + goto error_free_ctrls; + } + + /* PIXEL_RATE is fixed: just expose it to user space. */ + v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops, + V4L2_CID_PIXEL_RATE, 0, + DIV_ROUND_CLOSEST(mt9v111->sysclk, 2), 1, + DIV_ROUND_CLOSEST(mt9v111->sysclk, 2)); + + mt9v111->sd.ctrl_handler = &mt9v111->ctrls; + + /* Start with default configuration: 640x480 UYVY. */ + mt9v111->fmt = mt9v111_def_fmt; + + /* Re-calculate blankings for 640x480@15fps. */ + mt9v111->fps = 15; + tpf.numerator = 1; + tpf.denominator = mt9v111->fps; + mt9v111_calc_frame_rate(mt9v111, &tpf); + + mt9v111->pwr_count = 0; + mt9v111->addr_space = MT9V111_R01_IFP; + mt9v111->pending = true; + + v4l2_i2c_subdev_init(&mt9v111->sd, client, &mt9v111_ops); + +#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) + mt9v111->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + mt9v111->sd.entity.ops = &mt9v111_subdev_entity_ops; + mt9v111->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + + mt9v111->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_pads_init(&mt9v111->sd.entity, 1, &mt9v111->pad); + if (ret) + goto error_free_ctrls; +#endif + + ret = mt9v111_chip_probe(mt9v111); + if (ret) + goto error_free_ctrls; + + ret = v4l2_async_register_subdev(&mt9v111->sd); + if (ret) + goto error_free_ctrls; + + return 0; + +error_free_ctrls: + v4l2_ctrl_handler_free(&mt9v111->ctrls); + +#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) + media_entity_cleanup(&mt9v111->sd.entity); +#endif + + mutex_destroy(&mt9v111->pwr_mutex); + mutex_destroy(&mt9v111->stream_mutex); + + return ret; +} + +static int mt9v111_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd); + + v4l2_async_unregister_subdev(sd); + + v4l2_ctrl_handler_free(&mt9v111->ctrls); + +#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) + media_entity_cleanup(&sd->entity); +#endif + + mutex_destroy(&mt9v111->pwr_mutex); + mutex_destroy(&mt9v111->stream_mutex); + + devm_gpiod_put(mt9v111->dev, mt9v111->oe); + devm_gpiod_put(mt9v111->dev, mt9v111->standby); + devm_gpiod_put(mt9v111->dev, mt9v111->reset); + + devm_clk_put(mt9v111->dev, mt9v111->clk); + + return 0; +} + +static const struct of_device_id mt9v111_of_match[] = { + { .compatible = "aptina,mt9v111", }, + { /* sentinel */ }, +}; + +static struct i2c_driver mt9v111_driver = { + .driver = { + .name = "mt9v111", + .of_match_table = mt9v111_of_match, + }, + .probe_new = mt9v111_probe, + .remove = mt9v111_remove, +}; + +module_i2c_driver(mt9v111_driver); + +MODULE_DESCRIPTION("V4L2 sensor driver for Aptina MT9V111"); +MODULE_AUTHOR("Jacopo Mondi "); +MODULE_LICENSE("GPL v2");