From patchwork Wed Jul 24 19:25:47 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Ren=C3=A9_van_Dorst?= X-Patchwork-Id: 11057531 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9ED1D1398 for ; Wed, 24 Jul 2019 19:26:27 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 8D67B288C4 for ; Wed, 24 Jul 2019 19:26:27 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 80C7F288F6; Wed, 24 Jul 2019 19:26:27 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.0 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 97693288C4 for ; Wed, 24 Jul 2019 19:26:26 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728440AbfGXT00 (ORCPT ); Wed, 24 Jul 2019 15:26:26 -0400 Received: from mx.0dd.nl ([5.2.79.48]:52928 "EHLO mx.0dd.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728433AbfGXT0X (ORCPT ); Wed, 24 Jul 2019 15:26:23 -0400 Received: from mail.vdorst.com (mail.vdorst.com [IPv6:fd01::250]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx.0dd.nl (Postfix) with ESMTPS id 7E7E45FEA6; Wed, 24 Jul 2019 21:26:19 +0200 (CEST) Authentication-Results: mx.0dd.nl; dkim=pass (2048-bit key) header.d=vdorst.com header.i=@vdorst.com header.b="jcreP32V"; dkim-atps=neutral Received: from pc-rene.vdorst.com (pc-rene.vdorst.com [192.168.2.125]) by mail.vdorst.com (Postfix) with ESMTPA id F3BA21D25D3A; Wed, 24 Jul 2019 21:26:18 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.vdorst.com F3BA21D25D3A DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=vdorst.com; s=default; t=1563996379; bh=v42mfgYB8z+fNhAakpPFeHoGNCreOow3Pqb2kVWpTUs=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=jcreP32VhADIPXEbcBs6R2Q81dI2Kow6/e3AAzoiCJx2LTniAh+ib0JV+pvIt2Mdp mb4/DNNfsmsFMXZnKWvC/+L9ONNwKT7Mm5c//VVwUnWfM3tNbGvzNmxPzYX4C0TfFp G0SD2uL9W5CqlfZVVZcZZq8FygEQ29kEDb+t7O4GJ4l2W9BSsrw3rzxpdUcHl4+Po5 yw/SSLupSlAb8+0/mNiUWG//6uDbKFN/slrumzWLCz7PyXyIzdorpQLgctSMtgAV7P +Sp6/IWgvZvi4JpX2rVBjidd/v1w/XT/S4gGVZYzToU/++KE9PzDbi+0k7tcddkuH4 l5B85W/+PnCog== From: =?utf-8?q?Ren=C3=A9_van_Dorst?= To: netdev@vger.kernel.org Cc: frank-w@public-files.de, sean.wang@mediatek.com, f.fainelli@gmail.com, linux@armlinux.org.uk, davem@davemloft.net, matthias.bgg@gmail.com, andrew@lunn.ch, vivien.didelot@gmail.com, john@phrozen.org, linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org, robh+dt@kernel.org, devicetree@vger.kernel.org, =?utf-8?q?Ren=C3=A9_van_Dor?= =?utf-8?q?st?= Subject: [PATCH net-next 1/3] net: dsa: mt7530: Convert to PHYLINK API Date: Wed, 24 Jul 2019 21:25:47 +0200 Message-Id: <20190724192549.24615-2-opensource@vdorst.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190724192549.24615-1-opensource@vdorst.com> References: <20190724192549.24615-1-opensource@vdorst.com> MIME-Version: 1.0 Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Convert mt7530 to PHYLINK API Signed-off-by: René van Dorst rfc->v1: * Renamed P5_MODE_* to P5_INTF_SEL_*. fits the function more * Convert if-statement for speed bits to a switch suggested by Daniel Santos * Refactor flow_control pause bits and don't use state->link in mt7530_phylink_mac_config() suggested by Russell King * Move MAC tx/rx en/disable to mt7530_phylink_mac_link_up/down() suggested by Russell King * Always support PHY_INTERFACE_MODE_NA in mt7530_phylink_validate() suggested by Russell King * Added phylink_set_port_modes() in mt7530_phylink_validate() suggested by Russell King * Remove dev_err on the end of mt7530_phylink_mac_config() suggested by Russell King --- drivers/net/dsa/mt7530.c | 255 +++++++++++++++++++++++++++++---------- drivers/net/dsa/mt7530.h | 32 +++-- 2 files changed, 203 insertions(+), 84 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 3181e95586d6..73a2204bf81a 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include @@ -633,63 +633,6 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(mt7530_mib); } -static void mt7530_adjust_link(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct mt7530_priv *priv = ds->priv; - - if (phy_is_pseudo_fixed_link(phydev)) { - dev_dbg(priv->dev, "phy-mode for master device = %x\n", - phydev->interface); - - /* Setup TX circuit incluing relevant PAD and driving */ - mt7530_pad_clk_setup(ds, phydev->interface); - - if (priv->id == ID_MT7530) { - /* Setup RX circuit, relevant PAD and driving on the - * host which must be placed after the setup on the - * device side is all finished. - */ - mt7623_pad_clk_setup(ds); - } - } else { - u16 lcl_adv = 0, rmt_adv = 0; - u8 flowctrl; - u32 mcr = PMCR_USERP_LINK | PMCR_FORCE_MODE; - - switch (phydev->speed) { - case SPEED_1000: - mcr |= PMCR_FORCE_SPEED_1000; - break; - case SPEED_100: - mcr |= PMCR_FORCE_SPEED_100; - break; - } - - if (phydev->link) - mcr |= PMCR_FORCE_LNK; - - if (phydev->duplex) { - mcr |= PMCR_FORCE_FDX; - - if (phydev->pause) - rmt_adv = LPA_PAUSE_CAP; - if (phydev->asym_pause) - rmt_adv |= LPA_PAUSE_ASYM; - - lcl_adv = linkmode_adv_to_lcl_adv_t( - phydev->advertising); - flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); - - if (flowctrl & FLOW_CTRL_TX) - mcr |= PMCR_TX_FC_EN; - if (flowctrl & FLOW_CTRL_RX) - mcr |= PMCR_RX_FC_EN; - } - mt7530_write(priv, MT7530_PMCR_P(port), mcr); - } -} - static int mt7530_cpu_port_enable(struct mt7530_priv *priv, int port) @@ -698,9 +641,6 @@ mt7530_cpu_port_enable(struct mt7530_priv *priv, mt7530_write(priv, MT7530_PVC_P(port), PORT_SPEC_TAG); - /* Setup the MAC by default for the cpu port */ - mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK); - /* Disable auto learning on the cpu port */ mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); @@ -728,9 +668,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port, mutex_lock(&priv->reg_mutex); - /* Setup the MAC for the user port */ - mt7530_write(priv, MT7530_PMCR_P(port), PMCR_USERP_LINK); - /* Allow the user port gets connected to the cpu port and also * restore the port matrix if the port is the member of a certain * bridge. @@ -739,7 +676,7 @@ mt7530_port_enable(struct dsa_switch *ds, int port, priv->ports[port].enable = true; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, priv->ports[port].pm); - mt7530_port_set_status(priv, port, 1); + mt7530_port_set_status(priv, port, 0); mutex_unlock(&priv->reg_mutex); @@ -1299,6 +1236,8 @@ mt7530_setup(struct dsa_switch *ds) val |= MHWTRAP_MANUAL; mt7530_write(priv, MT7530_MHWTRAP, val); + priv->p6_interface = PHY_INTERFACE_MODE_NA; + /* Enable and reset MIB counters */ mt7530_mib_reset(ds); @@ -1323,6 +1262,186 @@ mt7530_setup(struct dsa_switch *ds) return 0; } +static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + u32 mcr_cur, mcr_new; + + switch (port) { + case 0: /* Internal phy */ + case 1: + case 2: + case 3: + case 4: + if (state->interface != PHY_INTERFACE_MODE_GMII) + return; + break; + /* case 5: Port 5 is not supported! */ + case 6: /* 1st cpu port */ + if (state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_TRGMII) + return; + + if (priv->p6_interface == state->interface) + break; + /* Setup TX circuit incluing relevant PAD and driving */ + mt7530_pad_clk_setup(ds, state->interface); + + if (priv->id == ID_MT7530) { + /* Setup RX circuit, relevant PAD and driving on the + * host which must be placed after the setup on the + * device side is all finished. + */ + mt7623_pad_clk_setup(ds); + } + priv->p6_interface = state->interface; + break; + default: + dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); + return; + } + + mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); + mcr_new = mcr_cur; + mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 | + PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN); + mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | + PMCR_BACKPR_EN | PMCR_FORCE_MODE | PMCR_FORCE_LNK; + + switch (state->speed) { + case SPEED_1000: + mcr_new |= PMCR_FORCE_SPEED_1000; + break; + case SPEED_100: + mcr_new |= PMCR_FORCE_SPEED_100; + break; + } + if (state->duplex == DUPLEX_FULL) { + mcr_new |= PMCR_FORCE_FDX; + if (state->pause & MLO_PAUSE_TX) + mcr_new |= PMCR_TX_FC_EN; + if (state->pause & MLO_PAUSE_RX) + mcr_new |= PMCR_RX_FC_EN; + } + + if (mcr_new != mcr_cur) + mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); +} + +static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_port_set_status(priv, port, 0); +} + +static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_port_set_status(priv, port, 1); +} + +static void mt7530_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + switch (port) { + case 0: /* Internal phy */ + case 1: + case 2: + case 3: + case 4: + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_GMII) + goto unsupported; + break; + /* case 5: Port 5 not supported! */ + case 6: /* 1st cpu port */ + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_TRGMII) + goto unsupported; + break; + default: + linkmode_zero(supported); + dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); + return; + } + + phylink_set_port_modes(mask); + phylink_set(mask, Autoneg); + + if (state->interface != PHY_INTERFACE_MODE_TRGMII) { + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + phylink_set(mask, 1000baseT_Half); + } + + phylink_set(mask, 1000baseT_Full); + + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); + return; + +unsupported: + linkmode_zero(supported); +} + +static int +mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, + struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + u32 pmsr; + + if (port < 0 || port >= MT7530_NUM_PORTS) + return -EINVAL; + + pmsr = mt7530_read(priv, MT7530_PMSR_P(port)); + + state->link = (pmsr & PMSR_LINK); + state->an_complete = state->link; + state->duplex = !!(pmsr & PMSR_DPX); + + switch (pmsr & PMSR_SPEED_MASK) { + case PMSR_SPEED_10: + state->speed = SPEED_10; + break; + case PMSR_SPEED_100: + state->speed = SPEED_100; + break; + case PMSR_SPEED_1000: + state->speed = SPEED_1000; + break; + default: + state->speed = SPEED_UNKNOWN; + break; + } + + state->pause &= ~(MLO_PAUSE_RX | MLO_PAUSE_TX); + if (pmsr & PMSR_RX_FC) + state->pause |= MLO_PAUSE_RX; + if (pmsr & PMSR_TX_FC) + state->pause |= MLO_PAUSE_TX; + + return 1; +} + static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt7530_setup, @@ -1331,7 +1450,6 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .phy_write = mt7530_phy_write, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, - .adjust_link = mt7530_adjust_link, .port_enable = mt7530_port_enable, .port_disable = mt7530_port_disable, .port_stp_state_set = mt7530_stp_state_set, @@ -1344,6 +1462,11 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .port_vlan_prepare = mt7530_port_vlan_prepare, .port_vlan_add = mt7530_port_vlan_add, .port_vlan_del = mt7530_port_vlan_del, + .phylink_validate = mt7530_phylink_validate, + .phylink_mac_link_state = mt7530_phylink_mac_link_state, + .phylink_mac_config = mt7530_phylink_mac_config, + .phylink_mac_link_down = mt7530_phylink_mac_link_down, + .phylink_mac_link_up = mt7530_phylink_mac_link_up, }; static const struct of_device_id mt7530_of_match[] = { diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index bfac90f48102..107dd04acede 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -198,26 +198,20 @@ enum mt7530_vlan_port_attr { #define PMCR_FORCE_SPEED_100 BIT(2) #define PMCR_FORCE_FDX BIT(1) #define PMCR_FORCE_LNK BIT(0) -#define PMCR_COMMON_LINK (PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ - PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ - PMCR_TX_EN | PMCR_RX_EN | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN) -#define PMCR_CPUP_LINK (PMCR_COMMON_LINK | PMCR_FORCE_MODE | \ - PMCR_FORCE_SPEED_1000 | \ - PMCR_FORCE_FDX | \ - PMCR_FORCE_LNK) -#define PMCR_USERP_LINK PMCR_COMMON_LINK -#define PMCR_FIXED_LINK (PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ - PMCR_FORCE_MODE | PMCR_TX_EN | \ - PMCR_RX_EN | PMCR_BACKPR_EN | \ - PMCR_BACKOFF_EN | \ - PMCR_FORCE_SPEED_1000 | \ - PMCR_FORCE_FDX | \ - PMCR_FORCE_LNK) -#define PMCR_FIXED_LINK_FC (PMCR_FIXED_LINK | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN) +#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \ + PMCR_FORCE_SPEED_1000) #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) +#define PMSR_EEE1G BIT(7) +#define PMSR_EEE100M BIT(6) +#define PMSR_RX_FC BIT(5) +#define PMSR_TX_FC BIT(4) +#define PMSR_SPEED_1000 BIT(3) +#define PMSR_SPEED_100 BIT(2) +#define PMSR_SPEED_10 0x00 +#define PMSR_SPEED_MASK (PMSR_SPEED_100 | PMSR_SPEED_1000) +#define PMSR_DPX BIT(1) +#define PMSR_LINK BIT(0) /* Register for MIB */ #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) @@ -423,6 +417,7 @@ struct mt7530_port { * @ports: Holding the state among ports * @reg_mutex: The lock for protecting among process accessing * registers + * @p6_interface Holding the current port 6 interface */ struct mt7530_priv { struct device *dev; @@ -435,6 +430,7 @@ struct mt7530_priv { struct gpio_desc *reset; unsigned int id; bool mcm; + phy_interface_t p6_interface; struct mt7530_port ports[MT7530_NUM_PORTS]; /* protect among processes for registers access*/ From patchwork Wed Jul 24 19:25:48 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Ren=C3=A9_van_Dorst?= X-Patchwork-Id: 11057535 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C87E314DB for ; Wed, 24 Jul 2019 19:26:28 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id B8F75288AD for ; Wed, 24 Jul 2019 19:26:28 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id AD284288C4; Wed, 24 Jul 2019 19:26:28 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.0 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id DD93E288EC for ; Wed, 24 Jul 2019 19:26:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728678AbfGXT00 (ORCPT ); Wed, 24 Jul 2019 15:26:26 -0400 Received: from mx.0dd.nl ([5.2.79.48]:52914 "EHLO mx.0dd.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728624AbfGXT0W (ORCPT ); Wed, 24 Jul 2019 15:26:22 -0400 Received: from mail.vdorst.com (mail.vdorst.com [IPv6:fd01::250]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx.0dd.nl (Postfix) with ESMTPS id 6A1725FDF7; Wed, 24 Jul 2019 21:26:19 +0200 (CEST) Authentication-Results: mx.0dd.nl; dkim=pass (2048-bit key) header.d=vdorst.com header.i=@vdorst.com header.b="FCedyfbr"; dkim-atps=neutral Received: from pc-rene.vdorst.com (pc-rene.vdorst.com [192.168.2.125]) by mail.vdorst.com (Postfix) with ESMTPA id 1C4641D25D3C; Wed, 24 Jul 2019 21:26:19 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.vdorst.com 1C4641D25D3C DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=vdorst.com; s=default; t=1563996379; bh=DcHx/91i6+Pd3ve7+oJz5ZrfG77cZVMraX/a4nS/HZw=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=FCedyfbrYbjt9TW2rCeistR5Df5zdaCnki4FehctlOVQSKFfuO4Dl2y9VggwmYnl1 AIVXtaOesYe5eIgMgbtbxkSoOgDw8PJbS+AcFf7XbDxuOQNMMCVg+VwJifhrZ7aoRM uMd7+oMwlMBEqRNsbtGexH9mIdUhVmbNIjLK8EDoTyCLFmkMluOqS5bhPfhmuIRfhA UPZn52Chl3u4FXzWILKAPLjQBB4u4ahkK28qoP7+qTjV/XuviD2rKrPzdeVI3pUXFd JXM/rjVxKbvyHg15WiatxE+hzBLheNjbEPhnMXxeKwQKekHKz4aAxH/M3Yz6vSV4Xv f1bQZgXOStjJQ== From: =?utf-8?q?Ren=C3=A9_van_Dorst?= To: netdev@vger.kernel.org Cc: frank-w@public-files.de, sean.wang@mediatek.com, f.fainelli@gmail.com, linux@armlinux.org.uk, davem@davemloft.net, matthias.bgg@gmail.com, andrew@lunn.ch, vivien.didelot@gmail.com, john@phrozen.org, linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org, robh+dt@kernel.org, devicetree@vger.kernel.org, =?utf-8?q?Ren=C3=A9_van_Dor?= =?utf-8?q?st?= Subject: [PATCH net-next 2/3] dt-bindings: net: dsa: mt7530: Add support for port 5 Date: Wed, 24 Jul 2019 21:25:48 +0200 Message-Id: <20190724192549.24615-3-opensource@vdorst.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190724192549.24615-1-opensource@vdorst.com> References: <20190724192549.24615-1-opensource@vdorst.com> MIME-Version: 1.0 Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP MT7530 port 5 has many modes/configurations. Update the documentation how to use port 5. Signed-off-by: René van Dorst rfc->v1: * No change --- .../devicetree/bindings/net/dsa/mt7530.txt | 215 ++++++++++++++++++ 1 file changed, 215 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index 47aa205ee0bd..f3486780f2c2 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -35,6 +35,39 @@ Required properties for the child nodes within ports container: - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled "cpu". +Port 5 of the switch is muxed between: +1. GMAC5: GMAC5 can interface with another external MAC or PHY. +2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC + of the SOC. Used in many setups where port 0/4 becomes the WAN port. + +Port 5 modes/configurations: +1. Port 5 is disabled and isolated: An external phy can interface to the 2nd + GMAC of the SOC. + In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd + GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC! +2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC. + It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode + and RGMII delay. +3. Port 5 is muxed to GMAC5 and can interface to an external phy. + Port 5 becomes an extra switch port. + Only works on platform where external phy TX<->RX lines are swapped. + Like in the Ubiquiti ER-X-SFP. +4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port. + Currently a 2nd CPU port is not supported by DSA code. + +Depending on how the external PHY is wired: +1. normal: The PHY can only connect to 2nd GMAC but not to the switch +2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as + a ethernet port. But can't interface to the 2nd GMAC. + +Based on the DT the port 5 mode is configured. + +Driver tries to lookup the phy-handle of the 2nd GMAC of the master device. +When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2. +phy-mode must be set, see also example 2 below! + * mt7621: phy-mode = "rgmii-txid"; + * mt7623: phy-mode = "rgmii"; + See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must be specified. @@ -94,3 +127,185 @@ Example: }; }; }; + +Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4. + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "rgmii-txid"; + phy-handle = <&phy4>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + /* Internal phy */ + phy4: ethernet-phy@4 { + reg = <4>; + }; + + mt7530: switch@1f { + compatible = "mediatek,mt7621"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1f>; + pinctrl-names = "default"; + mediatek,mcm; + + resets = <&rstctrl 2>; + reset-names = "mcm"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + +/* Commented out. Port 4 is handled by 2nd GMAC. + port@4 { + reg = <4>; + label = "lan4"; + }; +*/ + + cpu_port0: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; +}; + +Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY. + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + /* External phy */ + ephy5: ethernet-phy@7 { + reg = <7>; + }; + + mt7530: switch@1f { + compatible = "mediatek,mt7621"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1f>; + pinctrl-names = "default"; + mediatek,mcm; + + resets = <&rstctrl 2>; + reset-names = "mcm"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "lan5"; + phy-mode = "rgmii"; + phy-handle = <&ephy5>; + }; + + cpu_port0: port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; + }; +}; From patchwork Wed Jul 24 19:25:49 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Ren=C3=A9_van_Dorst?= X-Patchwork-Id: 11057601 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 02B6D912 for ; Wed, 24 Jul 2019 20:34:51 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E5B2028897 for ; Wed, 24 Jul 2019 20:34:50 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id D73A028918; Wed, 24 Jul 2019 20:34:50 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.0 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E250B28897 for ; Wed, 24 Jul 2019 20:34:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726640AbfGXT00 (ORCPT ); Wed, 24 Jul 2019 15:26:26 -0400 Received: from mx.0dd.nl ([5.2.79.48]:52944 "EHLO mx.0dd.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728638AbfGXT0X (ORCPT ); Wed, 24 Jul 2019 15:26:23 -0400 Received: from mail.vdorst.com (mail.vdorst.com [IPv6:fd01::250]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx.0dd.nl (Postfix) with ESMTPS id 871A760255; Wed, 24 Jul 2019 21:26:19 +0200 (CEST) Authentication-Results: mx.0dd.nl; dkim=pass (2048-bit key) header.d=vdorst.com header.i=@vdorst.com header.b="Q8ZvLSZr"; dkim-atps=neutral Received: from pc-rene.vdorst.com (pc-rene.vdorst.com [192.168.2.125]) by mail.vdorst.com (Postfix) with ESMTPA id 3A9981D25D3E; Wed, 24 Jul 2019 21:26:19 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.vdorst.com 3A9981D25D3E DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=vdorst.com; s=default; t=1563996379; bh=EXNETTW7qK/WSAltzbLuKahp3WLFxEkf0NmhMfikTX8=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=Q8ZvLSZrheygipXjvH0sRTx3hURRnqBm/xkAd80YS2PjpOTHzrNGoctvJR6mYfftR w41V/flhxThrK3RYE9VoUOaz+5yUc/9crMLlrTQZjWdYtPEiVuLr07wpJXZKzB90vK S4BeTbWO891BbRIcWv75l0u0Oyvo0sTCJSNa71ZaL2D4/RdRO7p/fdqEIjcnfupDXo zDbxgILtGPR5LDgS/cQDJ2tSCNVE3CcU3yDIyusDqdVKlRvHwQBAKVn48MlzRs2a4E D5wbnyCT7QL4wdGZS0i+urJrRHsZ21flSV0speYGSJFoAGAUUZcPEU5LAKE3Kh8u3Q EzershJpPpjDw== From: =?utf-8?q?Ren=C3=A9_van_Dorst?= To: netdev@vger.kernel.org Cc: frank-w@public-files.de, sean.wang@mediatek.com, f.fainelli@gmail.com, linux@armlinux.org.uk, davem@davemloft.net, matthias.bgg@gmail.com, andrew@lunn.ch, vivien.didelot@gmail.com, john@phrozen.org, linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org, robh+dt@kernel.org, devicetree@vger.kernel.org, =?utf-8?q?Ren=C3=A9_van_Dor?= =?utf-8?q?st?= Subject: [PATCH net-next 3/3] net: dsa: mt7530: Add support for port 5 Date: Wed, 24 Jul 2019 21:25:49 +0200 Message-Id: <20190724192549.24615-4-opensource@vdorst.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190724192549.24615-1-opensource@vdorst.com> References: <20190724192549.24615-1-opensource@vdorst.com> MIME-Version: 1.0 Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Adding support for port 5. Port 5 can muxed/interface to: - internal 5th GMAC of the switch; can be used as 2nd CPU port or as extra port with an external phy for a 6th ethernet port. - internal PHY of port 0 or 4; Used in most applications so that port 0 or 4 is the WAN port and interfaces with the 2nd GMAC of the SOC. Signed-off-by: René van Dorst rfc->v1: * Removed unnecessary info print suggested by Andrew Lunn * Added support for MII mode for port 5 --- drivers/net/dsa/mt7530.c | 145 ++++++++++++++++++++++++++++++++++++--- drivers/net/dsa/mt7530.h | 28 ++++++++ 2 files changed, 165 insertions(+), 8 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 73a2204bf81a..785ce825aeb1 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -633,6 +633,75 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(mt7530_mib); } +static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) +{ + struct mt7530_priv *priv = ds->priv; + u8 tx_delay = 0; + int val; + + mutex_lock(&priv->reg_mutex); + + val = mt7530_read(priv, MT7530_MHWTRAP); + + val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS; + val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL; + + switch (priv->p5_intf_sel) { + case P5_INTF_SEL_PHY_P0: + /* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */ + val |= MHWTRAP_PHY0_SEL; + /* fall through */ + case P5_INTF_SEL_PHY_P4: + /* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */ + val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS; + + /* Setup the MAC by default for the cpu port */ + mt7530_write(priv, MT7530_PMCR_P(5), 0x56300); + break; + case P5_INTF_SEL_GMAC5: + /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ + val &= ~MHWTRAP_P5_DIS; + break; + case P5_DISABLED: + interface = PHY_INTERFACE_MODE_NA; + break; + default: + dev_err(ds->dev, "Unsupported p5_intf_sel %d\n", + priv->p5_intf_sel); + goto unlock_exit; + } + + /* Setup RGMII settings */ + if (phy_interface_mode_is_rgmii(interface)) { + val |= MHWTRAP_P5_RGMII_MODE; + + /* P5 RGMII RX Clock Control: delay setting for 1000M */ + mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN); + + /* Don't set delay in DSA mode */ + if (!dsa_is_dsa_port(priv->ds, 5) && + (interface == PHY_INTERFACE_MODE_RGMII_TXID || + interface == PHY_INTERFACE_MODE_RGMII_ID)) + tx_delay = 4; /* n * 0.5 ns */ + + /* P5 RGMII TX Clock Control: delay x */ + mt7530_write(priv, MT7530_P5RGMIITXCR, + CSR_RGMII_TXC_CFG(0x10 + tx_delay)); + + /* reduce P5 RGMII Tx driving, 8mA */ + mt7530_write(priv, MT7530_IO_DRV_CR, + P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1)); + } + + mt7530_write(priv, MT7530_MHWTRAP, val); + + dev_info(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", + val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); + +unlock_exit: + mutex_unlock(&priv->reg_mutex); +} + static int mt7530_cpu_port_enable(struct mt7530_priv *priv, int port) @@ -1167,6 +1236,10 @@ mt7530_setup(struct dsa_switch *ds) u32 id, val; struct device_node *dn; struct mt7530_dummy_poll p; + phy_interface_t interface; + struct device_node *mac_np; + struct device_node *phy_node; + const __be32 *_id; /* The parent node of master netdev which holds the common system * controller also is the container for two GMACs nodes representing @@ -1254,6 +1327,40 @@ mt7530_setup(struct dsa_switch *ds) mt7530_port_disable(ds, i); } + /* Setup port 5 */ + priv->p5_intf_sel = P5_DISABLED; + interface = PHY_INTERFACE_MODE_NA; + + if (!dsa_is_unused_port(ds, 5)) { + priv->p5_intf_sel = P5_INTF_SEL_GMAC5; + interface = of_get_phy_mode(ds->ports[5].dn); + } else { + /* Scan the ethernet nodes. Look for GMAC1, Lookup used phy */ + for_each_child_of_node(dn, mac_np) { + if (!of_device_is_compatible(mac_np, + "mediatek,eth-mac")) + continue; + _id = of_get_property(mac_np, "reg", NULL); + if (be32_to_cpup(_id) != 1) + continue; + + interface = of_get_phy_mode(mac_np); + phy_node = of_parse_phandle(mac_np, "phy-handle", 0); + + if (phy_node->parent == priv->dev->of_node->parent) { + _id = of_get_property(phy_node, "reg", NULL); + id = be32_to_cpup(_id); + if (id == 0) + priv->p5_intf_sel = P5_INTF_SEL_PHY_P0; + if (id == 4) + priv->p5_intf_sel = P5_INTF_SEL_PHY_P4; + } + break; + } + } + + mt7530_setup_port5(ds, interface); + /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) @@ -1267,7 +1374,7 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, const struct phylink_link_state *state) { struct mt7530_priv *priv = ds->priv; - u32 mcr_cur, mcr_new; + u32 mcr_cur, mcr_new = 0; switch (port) { case 0: /* Internal phy */ @@ -1278,7 +1385,19 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, if (state->interface != PHY_INTERFACE_MODE_GMII) return; break; - /* case 5: Port 5 is not supported! */ + case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + if (!phy_interface_mode_is_rgmii(state->interface) && + state->interface != PHY_INTERFACE_MODE_MII && + state->interface != PHY_INTERFACE_MODE_GMII) + return; + if (priv->p5_intf_sel != P5_INTF_SEL_GMAC5) { + priv->p5_intf_sel = P5_INTF_SEL_GMAC5; + mt7530_setup_port5(ds, state->interface); + } + /* We are connected to external phy */ + if (dsa_is_user_port(ds, 5)) + mcr_new |= PMCR_EXT_PHY; + break; case 6: /* 1st cpu port */ if (state->interface != PHY_INTERFACE_MODE_RGMII && state->interface != PHY_INTERFACE_MODE_TRGMII) @@ -1304,7 +1423,7 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, } mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); - mcr_new = mcr_cur; + mcr_new |= mcr_cur; mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 | PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN); mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | @@ -1365,7 +1484,13 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port, state->interface != PHY_INTERFACE_MODE_GMII) goto unsupported; break; - /* case 5: Port 5 not supported! */ + case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ + if (state->interface != PHY_INTERFACE_MODE_NA && + !phy_interface_mode_is_rgmii(state->interface) && + state->interface != PHY_INTERFACE_MODE_MII && + state->interface != PHY_INTERFACE_MODE_GMII) + goto unsupported; + break; case 6: /* 1st cpu port */ if (state->interface != PHY_INTERFACE_MODE_NA && state->interface != PHY_INTERFACE_MODE_RGMII && @@ -1381,15 +1506,19 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port, phylink_set_port_modes(mask); phylink_set(mask, Autoneg); - if (state->interface != PHY_INTERFACE_MODE_TRGMII) { + if (state->interface == PHY_INTERFACE_MODE_TRGMII) { + phylink_set(mask, 1000baseT_Full); + } else { phylink_set(mask, 10baseT_Half); phylink_set(mask, 10baseT_Full); phylink_set(mask, 100baseT_Half); phylink_set(mask, 100baseT_Full); - phylink_set(mask, 1000baseT_Half); - } - phylink_set(mask, 1000baseT_Full); + if (state->interface != PHY_INTERFACE_MODE_MII) { + phylink_set(mask, 1000baseT_Half); + phylink_set(mask, 1000baseT_Full); + } + } phylink_set(mask, Pause); phylink_set(mask, Asym_Pause); diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 107dd04acede..0f7276a2270a 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -186,6 +186,7 @@ enum mt7530_vlan_port_attr { /* Register for port MAC control register */ #define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100)) #define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18) +#define PMCR_EXT_PHY BIT(17) #define PMCR_MAC_MODE BIT(16) #define PMCR_FORCE_MODE BIT(15) #define PMCR_TX_EN BIT(14) @@ -245,6 +246,7 @@ enum mt7530_vlan_port_attr { /* Register for hw trap modification */ #define MT7530_MHWTRAP 0x7804 +#define MHWTRAP_PHY0_SEL BIT(20) #define MHWTRAP_MANUAL BIT(16) #define MHWTRAP_P5_MAC_SEL BIT(13) #define MHWTRAP_P6_DIS BIT(8) @@ -402,6 +404,30 @@ struct mt7530_port { u16 pvid; }; +/* Port 5 interface select definitions */ +enum p5_interface_select { + P5_DISABLED = 0, + P5_INTF_SEL_PHY_P0, + P5_INTF_SEL_PHY_P4, + P5_INTF_SEL_GMAC5, +}; + +static const char *p5_intf_modes(unsigned int p5_interface) +{ + switch (p5_interface) { + case P5_DISABLED: + return "DISABLED"; + case P5_INTF_SEL_PHY_P0: + return "PHY P0"; + case P5_INTF_SEL_PHY_P4: + return "PHY P4"; + case P5_INTF_SEL_GMAC5: + return "GMAC5"; + default: + return "unknown"; + } +} + /* struct mt7530_priv - This is the main data structure for holding the state * of the driver * @dev: The device pointer @@ -418,6 +444,7 @@ struct mt7530_port { * @reg_mutex: The lock for protecting among process accessing * registers * @p6_interface Holding the current port 6 interface + * @p5_intf_sel: Holding the current port 5 interface select */ struct mt7530_priv { struct device *dev; @@ -431,6 +458,7 @@ struct mt7530_priv { unsigned int id; bool mcm; phy_interface_t p6_interface; + unsigned int p5_intf_sel; struct mt7530_port ports[MT7530_NUM_PORTS]; /* protect among processes for registers access*/