From patchwork Tue Sep 24 09:31:30 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Yangbo Lu X-Patchwork-Id: 11158323 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2D803112B for ; Tue, 24 Sep 2019 09:30:15 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 0A95D214AF for ; Tue, 24 Sep 2019 09:30:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2504186AbfIXJaO (ORCPT ); Tue, 24 Sep 2019 05:30:14 -0400 Received: from inva021.nxp.com ([92.121.34.21]:34118 "EHLO inva021.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2504226AbfIXJaO (ORCPT ); Tue, 24 Sep 2019 05:30:14 -0400 Received: from inva021.nxp.com (localhost [127.0.0.1]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 8C50E2000DE; Tue, 24 Sep 2019 11:30:12 +0200 (CEST) Received: from invc005.ap-rdc01.nxp.com (invc005.ap-rdc01.nxp.com [165.114.16.14]) by inva021.eu-rdc02.nxp.com (Postfix) with ESMTP id 55C7D2002C6; Tue, 24 Sep 2019 11:30:10 +0200 (CEST) Received: from localhost.localdomain (mega.ap.freescale.net [10.192.208.232]) by invc005.ap-rdc01.nxp.com (Postfix) with ESMTP id 05EDE402ED; Tue, 24 Sep 2019 17:30:04 +0800 (SGT) From: Yangbo Lu To: linux-mmc@vger.kernel.org, Ulf Hansson , Adrian Hunter Cc: Yangbo Lu Subject: [v2, 1/2] mmc: sdhci-of-esdhc: poll ESDHC_FLUSH_ASYNC_FIFO bit until completion Date: Tue, 24 Sep 2019 17:31:30 +0800 Message-Id: <20190924093131.17471-2-yangbo.lu@nxp.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190924093131.17471-1-yangbo.lu@nxp.com> References: <20190924093131.17471-1-yangbo.lu@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org The ESDHC_FLUSH_ASYNC_FIFO bit which is set to flush asynchronous FIFO should be polled until it's auto cleared by hardware. Signed-off-by: Yangbo Lu --- Changes for v2: - None. --- drivers/mmc/host/sdhci-of-esdhc.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 1d1953d..be0ba6b 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -655,6 +655,21 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) temp = sdhci_readl(host, ESDHC_DMA_SYSCTL); temp |= ESDHC_FLUSH_ASYNC_FIFO; sdhci_writel(host, temp, ESDHC_DMA_SYSCTL); + /* Wait max 20 ms */ + timeout = ktime_add_ms(ktime_get(), 20); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + if (!(sdhci_readl(host, ESDHC_DMA_SYSCTL) & + ESDHC_FLUSH_ASYNC_FIFO)) + break; + if (timedout) { + pr_err("%s: tuning block polling FLUSH_ASYNC_FIFO timeout.\n", + mmc_hostname(host->mmc)); + break; + } + udelay(10); + } } /* Wait max 20 ms */ @@ -811,6 +826,7 @@ static struct soc_device_attribute soc_fixup_tuning[] = { static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) { + ktime_t timeout; u32 val; esdhc_clock_enable(host, false); @@ -819,6 +835,22 @@ static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) val |= ESDHC_FLUSH_ASYNC_FIFO; sdhci_writel(host, val, ESDHC_DMA_SYSCTL); + /* Wait max 20 ms */ + timeout = ktime_add_ms(ktime_get(), 20); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + if (!(sdhci_readl(host, ESDHC_DMA_SYSCTL) & + ESDHC_FLUSH_ASYNC_FIFO)) + break; + if (timedout) { + pr_err("%s: tuning block polling FLUSH_ASYNC_FIFO timeout.\n", + mmc_hostname(host->mmc)); + break; + } + udelay(10); + } + val = sdhci_readl(host, ESDHC_TBCTL); if (enable) val |= ESDHC_TB_EN; From patchwork Tue Sep 24 09:31:31 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Yangbo Lu X-Patchwork-Id: 11158325 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4CCC9112B for ; Tue, 24 Sep 2019 09:30:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 2B0E7214AF for ; Tue, 24 Sep 2019 09:30:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2504226AbfIXJaQ (ORCPT ); Tue, 24 Sep 2019 05:30:16 -0400 Received: from inva020.nxp.com ([92.121.34.13]:47260 "EHLO inva020.nxp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2504241AbfIXJaQ (ORCPT ); Tue, 24 Sep 2019 05:30:16 -0400 Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 2A60F1A00D4; Tue, 24 Sep 2019 11:30:13 +0200 (CEST) Received: from invc005.ap-rdc01.nxp.com (invc005.ap-rdc01.nxp.com [165.114.16.14]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 55F2A1A0879; Tue, 24 Sep 2019 11:30:10 +0200 (CEST) Received: from localhost.localdomain (mega.ap.freescale.net [10.192.208.232]) by invc005.ap-rdc01.nxp.com (Postfix) with ESMTP id 98C52402EE; Tue, 24 Sep 2019 17:30:05 +0800 (SGT) From: Yangbo Lu To: linux-mmc@vger.kernel.org, Ulf Hansson , Adrian Hunter Cc: Yangbo Lu , Yinbo Zhu Subject: [v2, 2/2] mmc: sdhci-of-esdhc: fix up erratum A-008171 workaround Date: Tue, 24 Sep 2019 17:31:31 +0800 Message-Id: <20190924093131.17471-3-yangbo.lu@nxp.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190924093131.17471-1-yangbo.lu@nxp.com> References: <20190924093131.17471-1-yangbo.lu@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org A previous patch implemented an incomplete workaround of erratum A-008171. The complete workaround is as below. This patch is to implement the complete workaround which uses SW tuning if HW tuning fails, and retries both HW/SW tuning once with reduced clock if workaround fails. This is suggested by hardware team, and the patch had been verified on LS1046A eSDHC + Phison 32G eMMC which could trigger the erratum. Workaround: /* For T1040, T2080, LS1021A, T1023 Rev 1: */ 1. Program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO. 2. Program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO. 3. Program the software tuning mode by setting TBCTL[TB_MODE] = 2'h3. 4. Set SYSCTL2[EXTN] and SYSCTL2[SAMPCLKSEL]. 5. Issue SEND_TUNING_BLK Command (CMD19 for SD, CMD21 for MMC). 6. Wait for IRQSTAT[BRR], buffer read ready, to be set. 7. Clear IRQSTAT[BRR]. 8. Check SYSCTL2[EXTN] to be cleared. 9. Check SYSCTL2[SAMPCLKSEL], Sampling Clock Select. It's set value indicate tuning procedure success, and clear indicate failure. In case of tuning failure, fixed sampling scheme could be used by clearing TBCTL[TB_EN]. /* For LS1080A Rev 1, LS2088A Rev 1.0, LA1575A Rev 1.0: */ 1. Read the TBCTL[31:0] register. Write TBCTL[11:8]=4'h8 and wait for 1ms. 2. Read the TBCTL[31:0] register and rewrite again. Wait for 1ms second. 3. Read the TBSTAT[31:0] register twice. 3.1 Reset data lines by setting ESDHCCTL[RSTD] bit. 3.2 Check ESDHCCTL[RSTD] bit. 3.3 If ESDHCCTL[RSTD] is 0, go to step 3.4 else go to step 3.2. 3.4 Write 32'hFFFF_FFFF to IRQSTAT register. 4. if TBSTAT[15:8]-TBSTAT[7:0] > 4*DIV_RATIO or TBSTAT[7:0]-TBSTAT[15:8] > 4*DIV_RATIO , then program TBPTR[TB_WNDW_END_PTR] = 4*DIV_RATIO and program TBPTR[TB_WNDW_START_PTR] = 8*DIV_RATIO. /* For LS1012A Rev1, LS1043A Rev 1.x, LS1046A 1.0: */ 1. Read the TBCTL[0:31] register. Write TBCTL[20:23]=4'h8 and wait for 1ms. 2. Read the TBCTL[0:31] register and rewrite again. Wait for 1ms second. 3. Read the TBSTAT[0:31] register twice. 3.1 Reset data lines by setting ESDHCCTL[RSTD] bit. 3.2 Check ESDHCCTL[RSTD] bit. 3.3 If ESDHCCTL[RSTD] is 0, go to step 3.4 else go to step 3.2. 3.4 Write 32'hFFFF_FFFF to IRQSTAT register. 4. if TBSTAT[16:23]-TBSTAT[24:31] > 4*DIV_RATIO or TBSTAT[24:31]- TBSTAT[16:23] > 4* DIV_RATIO , then program TBPTR[TB_WNDW_END_PTR] = 4*DIV_RATIO and program TBPTR[TB_WNDW_START_PTR] = 8*DIV_RATIO. /* For LS1080A Rev 1, LS2088A Rev 1.0, LA1575A Rev 1.0 LS1012A Rev1, * LS1043A Rev 1.x, LS1046A 1.0: */ 5. else program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO. 6. Program the software tuning mode by setting TBCTL[TB_MODE] = 2'h3. 7. Set SYSCTL2[EXTN], wait 1us and SYSCTL2[SAMPCLKSEL]. 8. Issue SEND_TUNING_BLK Command (CMD19 for SD, CMD21 for MMC). 9. Wait for IRQSTAT[BRR], buffer read ready, to be set. 10. Clear IRQSTAT[BRR]. 11. Check SYSCTL2[EXTN] to be cleared. 12. Check SYSCTL2[SAMPCLKSEL], Sampling Clock Select. It's set value indicate tuning procedure success, and clear indicate failure. In case of tuning failure, fixed sampling scheme could be used by clearing TBCTL[TB_EN]. Fixes: b1f378ab5334 ("mmc: sdhci-of-esdhc: add erratum A008171 support") Signed-off-by: Yinbo Zhu Signed-off-by: Yangbo Lu Acked-by: Adrian Hunter --- Changes for v2: - Dropped sdhci start_tuning() hook. - Implemented SW tuning starting in eSDHC writew(). --- drivers/mmc/host/sdhci-esdhc.h | 14 +++ drivers/mmc/host/sdhci-of-esdhc.c | 222 ++++++++++++++++++++++++++++++++------ 2 files changed, 203 insertions(+), 33 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index 57b582b..9289bb4 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -51,6 +51,11 @@ #define ESDHC_CLOCK_HCKEN 0x00000002 #define ESDHC_CLOCK_IPGEN 0x00000001 +/* System Control 2 Register */ +#define ESDHC_SYSTEM_CONTROL_2 0x3c +#define ESDHC_SMPCLKSEL 0x00800000 +#define ESDHC_EXTN 0x00400000 + /* Host Controller Capabilities Register 2 */ #define ESDHC_CAPABILITIES_1 0x114 @@ -59,7 +64,16 @@ #define ESDHC_HS400_WNDW_ADJUST 0x00000040 #define ESDHC_HS400_MODE 0x00000010 #define ESDHC_TB_EN 0x00000004 +#define ESDHC_TB_MODE_MASK 0x00000003 +#define ESDHC_TB_MODE_SW 0x00000003 +#define ESDHC_TB_MODE_3 0x00000002 + +#define ESDHC_TBSTAT 0x124 + #define ESDHC_TBPTR 0x128 +#define ESDHC_WNDW_STRT_PTR_SHIFT 8 +#define ESDHC_WNDW_STRT_PTR_MASK (0x7f << 8) +#define ESDHC_WNDW_END_PTR_MASK 0x7f /* SD Clock Control Register */ #define ESDHC_SDCLKCTL 0x144 diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index be0ba6b..3a18951 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -77,8 +77,10 @@ struct sdhci_esdhc { bool quirk_incorrect_hostver; bool quirk_limited_clk_division; bool quirk_unreliable_pulse_detection; - bool quirk_fixup_tuning; + bool quirk_tuning_erratum_type1; + bool quirk_tuning_erratum_type2; bool quirk_ignore_data_inhibit; + bool in_sw_tuning; unsigned int peripheral_clock; const struct esdhc_clk_fixup *clk_fixup; u32 div_ratio; @@ -408,6 +410,8 @@ static void esdhc_le_writel(struct sdhci_host *host, u32 val, int reg) static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); int base = reg & ~0x3; u32 value; u32 ret; @@ -416,10 +420,24 @@ static void esdhc_be_writew(struct sdhci_host *host, u16 val, int reg) ret = esdhc_writew_fixup(host, reg, val, value); if (reg != SDHCI_TRANSFER_MODE) iowrite32be(ret, host->ioaddr + base); + + /* Starting SW tuning requires ESDHC_SMPCLKSEL to be set + * 1us later after ESDHC_EXTN is set. + */ + if (base == ESDHC_SYSTEM_CONTROL_2) { + if (!(value & ESDHC_EXTN) && (ret & ESDHC_EXTN) && + esdhc->in_sw_tuning) { + udelay(1); + ret |= ESDHC_SMPCLKSEL; + iowrite32be(ret, host->ioaddr + base); + } + } } static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); int base = reg & ~0x3; u32 value; u32 ret; @@ -428,6 +446,18 @@ static void esdhc_le_writew(struct sdhci_host *host, u16 val, int reg) ret = esdhc_writew_fixup(host, reg, val, value); if (reg != SDHCI_TRANSFER_MODE) iowrite32(ret, host->ioaddr + base); + + /* Starting SW tuning requires ESDHC_SMPCLKSEL to be set + * 1us later after ESDHC_EXTN is set. + */ + if (base == ESDHC_SYSTEM_CONTROL_2) { + if (!(value & ESDHC_EXTN) && (ret & ESDHC_EXTN) && + esdhc->in_sw_tuning) { + udelay(1); + ret |= ESDHC_SMPCLKSEL; + iowrite32(ret, host->ioaddr + base); + } + } } static void esdhc_be_writeb(struct sdhci_host *host, u8 val, int reg) @@ -811,16 +841,21 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc, } } -static struct soc_device_attribute soc_fixup_tuning[] = { +static struct soc_device_attribute soc_tuning_erratum_type1[] = { + { .family = "QorIQ T1023", .revision = "1.0", }, { .family = "QorIQ T1040", .revision = "1.0", }, { .family = "QorIQ T2080", .revision = "1.0", }, - { .family = "QorIQ T1023", .revision = "1.0", }, { .family = "QorIQ LS1021A", .revision = "1.0", }, - { .family = "QorIQ LS1080A", .revision = "1.0", }, - { .family = "QorIQ LS2080A", .revision = "1.0", }, + { }, +}; + +static struct soc_device_attribute soc_tuning_erratum_type2[] = { { .family = "QorIQ LS1012A", .revision = "1.0", }, { .family = "QorIQ LS1043A", .revision = "1.*", }, { .family = "QorIQ LS1046A", .revision = "1.0", }, + { .family = "QorIQ LS1080A", .revision = "1.0", }, + { .family = "QorIQ LS2080A", .revision = "1.0", }, + { .family = "QorIQ LA1575A", .revision = "1.0", }, { }, }; @@ -861,15 +896,97 @@ static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) esdhc_clock_enable(host, true); } +static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start, + u8 *window_end) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u8 tbstat_15_8, tbstat_7_0; + u32 val; + + if (esdhc->quirk_tuning_erratum_type1) { + *window_start = 5 * esdhc->div_ratio; + *window_end = 3 * esdhc->div_ratio; + return; + } + + /* Write TBCTL[11:8]=4'h8 */ + val = sdhci_readl(host, ESDHC_TBCTL); + val &= ~(0xf << 8); + val |= 8 << 8; + sdhci_writel(host, val, ESDHC_TBCTL); + + mdelay(1); + + /* Read TBCTL[31:0] register and rewrite again */ + val = sdhci_readl(host, ESDHC_TBCTL); + sdhci_writel(host, val, ESDHC_TBCTL); + + mdelay(1); + + /* Read the TBSTAT[31:0] register twice */ + val = sdhci_readl(host, ESDHC_TBSTAT); + val = sdhci_readl(host, ESDHC_TBSTAT); + + /* Reset data lines by setting ESDHCCTL[RSTD] */ + sdhci_reset(host, SDHCI_RESET_DATA); + /* Write 32'hFFFF_FFFF to IRQSTAT register */ + sdhci_writel(host, 0xFFFFFFFF, SDHCI_INT_STATUS); + + /* If TBSTAT[15:8]-TBSTAT[7:0] > 4 * div_ratio + * or TBSTAT[7:0]-TBSTAT[15:8] > 4 * div_ratio, + * then program TBPTR[TB_WNDW_END_PTR] = 4 * div_ratio + * and program TBPTR[TB_WNDW_START_PTR] = 8 * div_ratio. + */ + tbstat_7_0 = val & 0xff; + tbstat_15_8 = (val >> 8) & 0xff; + + if (abs(tbstat_15_8 - tbstat_7_0) > (4 * esdhc->div_ratio)) { + *window_start = 8 * esdhc->div_ratio; + *window_end = 4 * esdhc->div_ratio; + } else { + *window_start = 5 * esdhc->div_ratio; + *window_end = 3 * esdhc->div_ratio; + } +} + +static int esdhc_execute_sw_tuning(struct mmc_host *mmc, u32 opcode, + u8 window_start, u8 window_end) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u32 val; + int ret; + + /* Program TBPTR[TB_WNDW_END_PTR] and TBPTR[TB_WNDW_START_PTR] */ + val = ((u32)window_start << ESDHC_WNDW_STRT_PTR_SHIFT) & + ESDHC_WNDW_STRT_PTR_MASK; + val |= window_end & ESDHC_WNDW_END_PTR_MASK; + sdhci_writel(host, val, ESDHC_TBPTR); + + /* Program the software tuning mode by setting TBCTL[TB_MODE]=2'h3 */ + val = sdhci_readl(host, ESDHC_TBCTL); + val &= ~ESDHC_TB_MODE_MASK; + val |= ESDHC_TB_MODE_SW; + sdhci_writel(host, val, ESDHC_TBCTL); + + esdhc->in_sw_tuning = true; + ret = sdhci_execute_tuning(mmc, opcode); + esdhc->in_sw_tuning = false; + return ret; +} + static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u8 window_start, window_end; + int ret, retries = 1; bool hs400_tuning; unsigned int clk; u32 val; - int ret; /* For tuning mode, the sd clock divisor value * must be larger than 3 according to reference manual. @@ -878,39 +995,73 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) if (host->clock > clk) esdhc_of_set_clock(host, clk); - if (esdhc->quirk_limited_clk_division && - host->flags & SDHCI_HS400_TUNING) - esdhc_of_set_clock(host, host->clock); - esdhc_tuning_block_enable(host, true); hs400_tuning = host->flags & SDHCI_HS400_TUNING; - ret = sdhci_execute_tuning(mmc, opcode); - if (hs400_tuning) { - val = sdhci_readl(host, ESDHC_SDTIMNGCTL); - val |= ESDHC_FLW_CTL_BG; - sdhci_writel(host, val, ESDHC_SDTIMNGCTL); - } + do { + if (esdhc->quirk_limited_clk_division && + hs400_tuning) + esdhc_of_set_clock(host, host->clock); - if (host->tuning_err == -EAGAIN && esdhc->quirk_fixup_tuning) { + /* Do HW tuning */ + val = sdhci_readl(host, ESDHC_TBCTL); + val &= ~ESDHC_TB_MODE_MASK; + val |= ESDHC_TB_MODE_3; + sdhci_writel(host, val, ESDHC_TBCTL); - /* program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and - * program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO - */ - val = sdhci_readl(host, ESDHC_TBPTR); - val = (val & ~((0x7f << 8) | 0x7f)) | - (3 * esdhc->div_ratio) | ((5 * esdhc->div_ratio) << 8); - sdhci_writel(host, val, ESDHC_TBPTR); + ret = sdhci_execute_tuning(mmc, opcode); + if (ret) + break; - /* program the software tuning mode by setting - * TBCTL[TB_MODE]=2'h3 + /* If HW tuning fails and triggers erratum, + * try workaround. */ - val = sdhci_readl(host, ESDHC_TBCTL); - val |= 0x3; - sdhci_writel(host, val, ESDHC_TBCTL); - sdhci_execute_tuning(mmc, opcode); + ret = host->tuning_err; + if (ret == -EAGAIN && + (esdhc->quirk_tuning_erratum_type1 || + esdhc->quirk_tuning_erratum_type2)) { + /* Recover HS400 tuning flag */ + if (hs400_tuning) + host->flags |= SDHCI_HS400_TUNING; + pr_info("%s: Hold on to use fixed sampling clock. Try SW tuning!\n", + mmc_hostname(mmc)); + /* Do SW tuning */ + esdhc_prepare_sw_tuning(host, &window_start, + &window_end); + ret = esdhc_execute_sw_tuning(mmc, opcode, + window_start, + window_end); + if (ret) + break; + + /* Retry both HW/SW tuning with reduced clock. */ + ret = host->tuning_err; + if (ret == -EAGAIN && retries) { + /* Recover HS400 tuning flag */ + if (hs400_tuning) + host->flags |= SDHCI_HS400_TUNING; + + clk = host->max_clk / (esdhc->div_ratio + 1); + esdhc_of_set_clock(host, clk); + pr_info("%s: Hold on to use fixed sampling clock. Try tuning with reduced clock!\n", + mmc_hostname(mmc)); + } else { + break; + } + } else { + break; + } + } while (retries--); + + if (ret) { + esdhc_tuning_block_enable(host, false); + } else if (hs400_tuning) { + val = sdhci_readl(host, ESDHC_SDTIMNGCTL); + val |= ESDHC_FLW_CTL_BG; + sdhci_writel(host, val, ESDHC_SDTIMNGCTL); } + return ret; } @@ -1146,10 +1297,15 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) pltfm_host = sdhci_priv(host); esdhc = sdhci_pltfm_priv(pltfm_host); - if (soc_device_match(soc_fixup_tuning)) - esdhc->quirk_fixup_tuning = true; + if (soc_device_match(soc_tuning_erratum_type1)) + esdhc->quirk_tuning_erratum_type1 = true; + else + esdhc->quirk_tuning_erratum_type1 = false; + + if (soc_device_match(soc_tuning_erratum_type2)) + esdhc->quirk_tuning_erratum_type2 = true; else - esdhc->quirk_fixup_tuning = false; + esdhc->quirk_tuning_erratum_type2 = false; if (esdhc->vendor_ver == VENDOR_V_22) host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;