From patchwork Thu Nov 7 15:31:26 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Gregory CLEMENT X-Patchwork-Id: 11233235 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A0C41139A for ; Thu, 7 Nov 2019 15:35:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7EC0A21882 for ; Thu, 7 Nov 2019 15:35:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2388979AbfKGPev (ORCPT ); Thu, 7 Nov 2019 10:34:51 -0500 Received: from relay11.mail.gandi.net ([217.70.178.231]:60099 "EHLO relay11.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729698AbfKGPev (ORCPT ); Thu, 7 Nov 2019 10:34:51 -0500 Received: from localhost (alyon-657-1-975-54.w92-137.abo.wanadoo.fr [92.137.17.54]) (Authenticated sender: gregory.clement@bootlin.com) by relay11.mail.gandi.net (Postfix) with ESMTPSA id 0296A100007; Thu, 7 Nov 2019 15:34:46 +0000 (UTC) From: Gregory CLEMENT To: Cristian Birsan , Felipe Balbi , Greg Kroah-Hartman , Alan Stern , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Rob Herring , devicetree@vger.kernel.org, Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , linux-arm-kernel@lists.infradead.org, Thomas Petazzoni , Gregory CLEMENT Subject: [PATCH 1/3] usb: gadget: udc: atmel: Don't use DT to configure end point Date: Thu, 7 Nov 2019 16:31:26 +0100 Message-Id: <20191107153128.11038-2-gregory.clement@bootlin.com> X-Mailer: git-send-email 2.24.0.rc1 In-Reply-To: <20191107153128.11038-1-gregory.clement@bootlin.com> References: <20191107153128.11038-1-gregory.clement@bootlin.com> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The endpoint configuration used to be stored in the device tree, however the configuration depend on the "version" of the controller itself. This information is already documented by the compatible string. It then possible to just rely on the compatible string and completely remove the full ep configuration done in the device tree as it was already the case for all the other USB device controller. Signed-off-by: Gregory CLEMENT Acked-by: Cristian Birsan --- drivers/usb/gadget/udc/atmel_usba_udc.c | 112 +++++++++++++++--------- drivers/usb/gadget/udc/atmel_usba_udc.h | 12 +++ 2 files changed, 84 insertions(+), 40 deletions(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 86ffc8307864..2db833caeb09 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -2040,10 +2040,56 @@ static const struct usba_udc_errata at91sam9g45_errata = { .pulse_bias = at91sam9g45_pulse_bias, }; +static const struct usba_ep_config ep_config_sam9[] __initconst = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 3 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 4 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ +}; + +static const struct usba_ep_config ep_config_sama5[] __initconst = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 3 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 4 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 7 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 8 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 9 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 10 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 11 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 12 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 13 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 14 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 15 */ +}; + +static const struct usba_udc_config udc_at91sam9rl_cfg = { + .errata = &at91sam9rl_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), +}; + +static const struct usba_udc_config udc_at91sam9g45_cfg = { + .errata = &at91sam9g45_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), +}; + +static const struct usba_udc_config udc_sama5d3_cfg = { + .config = ep_config_sama5, + .num_ep = ARRAY_SIZE(ep_config_sama5), +}; + static const struct of_device_id atmel_udc_dt_ids[] = { - { .compatible = "atmel,at91sam9rl-udc", .data = &at91sam9rl_errata }, - { .compatible = "atmel,at91sam9g45-udc", .data = &at91sam9g45_errata }, - { .compatible = "atmel,sama5d3-udc" }, + { .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg }, + { .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg }, + { .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg }, { /* sentinel */ } }; @@ -2052,18 +2098,19 @@ MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids); static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, struct usba_udc *udc) { - u32 val; struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; struct device_node *pp; int i, ret; struct usba_ep *eps, *ep; + const struct usba_udc_config *udc_config; match = of_match_node(atmel_udc_dt_ids, np); if (!match) return ERR_PTR(-EINVAL); - udc->errata = match->data; + udc_config = match->data; + udc->errata = udc_config->errata; udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc"); if (IS_ERR(udc->pmc)) udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc"); @@ -2079,8 +2126,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, if (fifo_mode == 0) { pp = NULL; - while ((pp = of_get_next_child(np, pp))) - udc->num_ep++; + udc->num_ep = udc_config->num_ep; udc->configured_ep = 1; } else { udc->num_ep = usba_config_fifo_table(udc); @@ -2097,52 +2143,38 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, pp = NULL; i = 0; - while ((pp = of_get_next_child(np, pp)) && i < udc->num_ep) { + while (i < udc->num_ep) { + const struct usba_ep_config *ep_cfg = &udc_config->config[i]; + ep = &eps[i]; - ret = of_property_read_u32(pp, "reg", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret); - goto err; - } - ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : val; + ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i; + + /* Only the first EP is 64 bytes */ + if (ep->index == 0) + ep->fifo_size = 64; + else + ep->fifo_size = 1024; - ret = of_property_read_u32(pp, "atmel,fifo-size", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret); - goto err; - } if (fifo_mode) { - if (val < udc->fifo_cfg[i].fifo_size) { + if (ep->fifo_size < udc->fifo_cfg[i].fifo_size) dev_warn(&pdev->dev, - "Using max fifo-size value from DT\n"); - ep->fifo_size = val; - } else { + "Using default max fifo-size value\n"); + else ep->fifo_size = udc->fifo_cfg[i].fifo_size; - } - } else { - ep->fifo_size = val; } - ret = of_property_read_u32(pp, "atmel,nb-banks", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret); - goto err; - } + ep->nr_banks = ep_cfg->nr_banks; if (fifo_mode) { - if (val < udc->fifo_cfg[i].nr_banks) { + if (ep->nr_banks < udc->fifo_cfg[i].nr_banks) dev_warn(&pdev->dev, - "Using max nb-banks value from DT\n"); - ep->nr_banks = val; - } else { + "Using default max nb-banks value\n"); + else ep->nr_banks = udc->fifo_cfg[i].nr_banks; - } - } else { - ep->nr_banks = val; } - ep->can_dma = of_property_read_bool(pp, "atmel,can-dma"); - ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc"); + ep->can_dma = ep_cfg->can_dma; + ep->can_isoc = ep_cfg->can_isoc; sprintf(ep->name, "ep%d", ep->index); ep->ep.name = ep->name; diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index a0225e4543d4..48e332439ed5 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -290,6 +290,12 @@ struct usba_ep { #endif }; +struct usba_ep_config { + u8 nr_banks; + unsigned int can_dma:1; + unsigned int can_isoc:1; +}; + struct usba_request { struct usb_request req; struct list_head queue; @@ -307,6 +313,12 @@ struct usba_udc_errata { void (*pulse_bias)(struct usba_udc *udc); }; +struct usba_udc_config { + const struct usba_udc_errata *errata; + const struct usba_ep_config *config; + const int num_ep; +}; + struct usba_udc { /* Protect hw registers from concurrent modifications */ spinlock_t lock; From patchwork Thu Nov 7 15:31:27 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Gregory CLEMENT X-Patchwork-Id: 11233233 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A8FAB139A for ; Thu, 7 Nov 2019 15:35:01 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9187121882 for ; Thu, 7 Nov 2019 15:35:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389023AbfKGPev (ORCPT ); Thu, 7 Nov 2019 10:34:51 -0500 Received: from relay2-d.mail.gandi.net ([217.70.183.194]:46547 "EHLO relay2-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2388901AbfKGPev (ORCPT ); Thu, 7 Nov 2019 10:34:51 -0500 X-Originating-IP: 92.137.17.54 Received: from localhost (alyon-657-1-975-54.w92-137.abo.wanadoo.fr [92.137.17.54]) (Authenticated sender: gregory.clement@bootlin.com) by relay2-d.mail.gandi.net (Postfix) with ESMTPSA id 160B640005; Thu, 7 Nov 2019 15:34:48 +0000 (UTC) From: Gregory CLEMENT To: Cristian Birsan , Felipe Balbi , Greg Kroah-Hartman , Alan Stern , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Rob Herring , devicetree@vger.kernel.org, Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , linux-arm-kernel@lists.infradead.org, Thomas Petazzoni , Gregory CLEMENT Subject: [PATCH 2/3] dt-bindings: usb: atmel: Mark EP child node as deprecated Date: Thu, 7 Nov 2019 16:31:27 +0100 Message-Id: <20191107153128.11038-3-gregory.clement@bootlin.com> X-Mailer: git-send-email 2.24.0.rc1 In-Reply-To: <20191107153128.11038-1-gregory.clement@bootlin.com> References: <20191107153128.11038-1-gregory.clement@bootlin.com> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org There is no need to describe the end point in the deice tree. These properties won't be use anymore, so mark them as deprecated to keep the old device tree documented. Signed-off-by: Gregory CLEMENT Reviewed-by: Rob Herring --- .../devicetree/bindings/usb/atmel-usb.txt | 56 +------------------ 1 file changed, 3 insertions(+), 53 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 44e80153b148..423b99a8fd97 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -88,13 +88,15 @@ Required properties: - clock-names: Should contain two strings "pclk" for the peripheral clock "hclk" for the host clock + +Deprecated property: - ep childnode: To specify the number of endpoints and their properties. Optional properties: - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether vbus is present (USB is connected). -Required child node properties: +Deprecated child node properties: - name: Name of the endpoint. - reg: Num of the endpoint. - atmel,fifo-size: Size of the fifo. @@ -112,56 +114,4 @@ usb2: gadget@fff78000 { clocks = <&utmi>, <&udphs_clk>; clock-names = "hclk", "pclk"; atmel,vbus-gpio = <&pioB 19 0>; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; From patchwork Thu Nov 7 15:31:28 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Gregory CLEMENT X-Patchwork-Id: 11233231 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A65BD139A for ; Thu, 7 Nov 2019 15:34:58 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7C58B218AE for ; Thu, 7 Nov 2019 15:34:58 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389183AbfKGPey (ORCPT ); Thu, 7 Nov 2019 10:34:54 -0500 Received: from relay11.mail.gandi.net ([217.70.178.231]:34321 "EHLO relay11.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729698AbfKGPex (ORCPT ); Thu, 7 Nov 2019 10:34:53 -0500 Received: from localhost (alyon-657-1-975-54.w92-137.abo.wanadoo.fr [92.137.17.54]) (Authenticated sender: gregory.clement@bootlin.com) by relay11.mail.gandi.net (Postfix) with ESMTPSA id 81AAC100012; Thu, 7 Nov 2019 15:34:50 +0000 (UTC) From: Gregory CLEMENT To: Cristian Birsan , Felipe Balbi , Greg Kroah-Hartman , Alan Stern , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Rob Herring , devicetree@vger.kernel.org, Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , linux-arm-kernel@lists.infradead.org, Thomas Petazzoni , Gregory CLEMENT Subject: [PATCH 3/3] ARM: dts: at91: Remove the USB EP child node Date: Thu, 7 Nov 2019 16:31:28 +0100 Message-Id: <20191107153128.11038-4-gregory.clement@bootlin.com> X-Mailer: git-send-email 2.24.0.rc1 In-Reply-To: <20191107153128.11038-1-gregory.clement@bootlin.com> References: <20191107153128.11038-1-gregory.clement@bootlin.com> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The endpoint configuration used to be stored in the device tree, however the configuration depend on the "version" of the controller itself. Then the EP child node are useless and describe as deprecated in the documentation binding: remove all the nodes from the SoC device tree file. Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/at91sam9g45.dtsi | 52 ------------- arch/arm/boot/dts/at91sam9rl.dtsi | 52 ------------- arch/arm/boot/dts/at91sam9x5.dtsi | 52 ------------- arch/arm/boot/dts/sama5d2.dtsi | 118 ----------------------------- arch/arm/boot/dts/sama5d3.dtsi | 105 ------------------------- arch/arm/boot/dts/sama5d4.dtsi | 118 ----------------------------- 6 files changed, 497 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 691c95ea6175..63bfe546cd8d 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1204,58 +1204,6 @@ clocks = <&udphs_clk>, <&utmi>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; clk32k: sckc@fffffd50 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 8643b7151565..e118bacb7d7c 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -308,58 +308,6 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; dma0: dma-controller@ffffe600 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 7c2eb93f8cac..685a1b9f3ae5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -876,58 +876,6 @@ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "pclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; watchdog: watchdog@fffffe40 { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2e2c1a7b1d1d..daafcffbe033 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -122,124 +122,6 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@7 { - reg = <7>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@8 { - reg = <8>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@9 { - reg = <9>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@10 { - reg = <10>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@11 { - reg = <11>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@12 { - reg = <12>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@13 { - reg = <13>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@14 { - reg = <14>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@15 { - reg = <15>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; }; usb1: ohci@400000 { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index f770aace0efd..dfd095f33f95 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1402,111 +1402,6 @@ clocks = <&udphs_clk>, <&utmi>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@7 { - reg = <7>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@8 { - reg = <8>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@9 { - reg = <9>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@10 { - reg = <10>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@11 { - reg = <11>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@12 { - reg = <12>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@13 { - reg = <13>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@14 { - reg = <14>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@15 { - reg = <15>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; }; usb1: ohci@600000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 6ab27a7b388d..0ece6b22d287 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -105,124 +105,6 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@7 { - reg = <7>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@8 { - reg = <8>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@9 { - reg = <9>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@10 { - reg = <10>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@11 { - reg = <11>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@12 { - reg = <12>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@13 { - reg = <13>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@14 { - reg = <14>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@15 { - reg = <15>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; }; usb1: ohci@500000 {