From patchwork Fri Dec 6 07:40:47 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jian Hu X-Patchwork-Id: 11275695 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1FB0614BD for ; Fri, 6 Dec 2019 07:41:59 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id D854724659 for ; Fri, 6 Dec 2019 07:41:58 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="h1/bWwB5" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org D854724659 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=amlogic.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=TZAl3ApxCIltJCMOOYzs3tDU/qdM8mKcFD3BuPHFjwY=; b=h1/bWwB5HYyysn 7RPuF+jWez10v8NYD9VzFRyytIC29FDWYeQDl8KJoOBMXgRrKXgNRELef5tGxlzJUyJ6sXWKCXxVZ Q+6cRmB1BktiJtXzshRQ9NpTAwECh6ZavWICX6Va+Wg9VCIDrq8e3E73+v9rqMtp/qZcELDwSzo9H FSFYmgaNubUo+rzJXnT8CDQDZI0xZZU38mk4Zyxv/DdVxKGZe4Gva+9MhE1EJdapaRhh+baofEUwq 6ML4lebijDGrsK4m0hYDQlVW6yAH8Duv9V+JLz/a29lJ6jYCTlC1YAoLdSeZaXhaFm96+ttFXj5eM aXxhydH/S9Hk+3JIswhg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8FS-0002OS-2c; Fri, 06 Dec 2019 07:41:58 +0000 Received: from mail-sz.amlogic.com ([211.162.65.117]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8Ej-0001eX-4A; Fri, 06 Dec 2019 07:41:17 +0000 Received: from droid15-sz.amlogic.com (10.28.8.25) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.1591.10; Fri, 6 Dec 2019 15:41:36 +0800 From: Jian Hu To: Jerome Brunet , Neil Armstrong Subject: [PATCH v4 1/6] dt-bindings: clock: meson: add A1 PLL clock controller bindings Date: Fri, 6 Dec 2019 15:40:47 +0800 Message-ID: <20191206074052.15557-2-jian.hu@amlogic.com> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191206074052.15557-1-jian.hu@amlogic.com> References: <20191206074052.15557-1-jian.hu@amlogic.com> MIME-Version: 1.0 X-Originating-IP: [10.28.8.25] X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191205_234113_167685_C9A5A901 X-CRM114-Status: UNSURE ( 9.31 ) X-CRM114-Notice: Please train this message. X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Rob Herring , Victor Wan , Jianxin Pan , devicetree@vger.kernel.org, Martin Blumenstingl , Kevin Hilman , Michael Turquette , linux-kernel@vger.kernel.org, Stephen Boyd , Jian Hu , linux-arm-kernel@lists.infradead.org, Qiufang Dai , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, Chandle Zou Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org Add the documentation to support Amlogic A1 PLL clock driver, and add A1 PLL clock controller bindings. Signed-off-by: Jian Hu --- .../bindings/clock/amlogic,a1-pll-clkc.yaml | 59 +++++++++++++++++++ include/dt-bindings/clock/a1-pll-clkc.h | 16 +++++ 2 files changed, 75 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml new file mode 100644 index 000000000000..7feeef5abf1b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson A/C serials PLL Clock Control Unit Device Tree Bindings + +maintainers: + - Neil Armstrong + - Jerome Brunet + - Jian Hu + +properties: + compatible: + - enum: + - amlogic,a1-pll-clkc + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +clocks: + minItems: 2 + maxItems: 2 + items: + - description: Input xtal_fixpll + - description: Input xtal_hifipll + +clock-names: + minItems: 2 + maxItems: 2 + items: + - const: xtal_fixpll + - const: xtal_hifipll + +required: + - compatible + - "#clock-cells" + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + clkc_pll: pll-clock-controller@7c80 { + compatible = "amlogic,a1-pll-clkc"; + reg = <0 0x7c80 0 0x18c>; + #clock-cells = <1>; + clocks = <&clkc_periphs CLKID_XTAL_FIXPLL>, + <&clkc_periphs CLKID_XTAL_HIFIPLL>; + clock-names = "xtal_fixpll", "xtal_hifipll"; + }; diff --git a/include/dt-bindings/clock/a1-pll-clkc.h b/include/dt-bindings/clock/a1-pll-clkc.h new file mode 100644 index 000000000000..58eae237e503 --- /dev/null +++ b/include/dt-bindings/clock/a1-pll-clkc.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#ifndef __A1_PLL_CLKC_H +#define __A1_PLL_CLKC_H + +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 6 +#define CLKID_FCLK_DIV3 7 +#define CLKID_FCLK_DIV5 8 +#define CLKID_FCLK_DIV7 9 +#define CLKID_HIFI_PLL 10 + +#endif /* __A1_PLL_CLKC_H */ From patchwork Fri Dec 6 07:40:48 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jian Hu X-Patchwork-Id: 11275697 X-Patchwork-Delegate: neil.armstrong@linaro.org Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id EE58314BD for ; Fri, 6 Dec 2019 07:42:01 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id C88D324659 for ; Fri, 6 Dec 2019 07:42:01 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="lobxz/7x" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org C88D324659 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=amlogic.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=tCjrrRa7+M2wrEOCx2zwZvJaGZI1ws+PrHpCAz5zyQ0=; b=lobxz/7xXWQTb7 32Oc5nSlJ1+yva+eQJgXgWffTodz/VKF1KPG6llu5bppRIOM1XfN3z6ggfhmoOdGLEFURgSf4RLCM 4zICK8dwM7PExNqZkLNbSWOyMuT1i+KAZNtnsDVbmJHa19xlWS7B2rnALYGq2idMXJlyyhGEcBn82 XqyQV0Em67gbpF6RqJasFAPZyHorSx/v7MXLbXMt7R4ABXY3RG9+MhWpoCvXGvkPdwUAAosEOMJfB Go0rNXdQBLNvZdOh+N6m8Vn8rPSaVixYiL9rXvT1uqdbbIb+qYFcYKeFsju8u5mfuASHGZ7Y0wKu9 4h8xNxy42IeWFMpRSlEg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8FU-0002Qg-RU; Fri, 06 Dec 2019 07:42:00 +0000 Received: from mail-sz.amlogic.com ([211.162.65.117]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8En-0001eX-IQ; Fri, 06 Dec 2019 07:41:19 +0000 Received: from droid15-sz.amlogic.com (10.28.8.25) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.1591.10; Fri, 6 Dec 2019 15:41:36 +0800 From: Jian Hu To: Jerome Brunet , Neil Armstrong Subject: [PATCH v4 2/6] clk: meson: add support for A1 PLL clock ops Date: Fri, 6 Dec 2019 15:40:48 +0800 Message-ID: <20191206074052.15557-3-jian.hu@amlogic.com> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191206074052.15557-1-jian.hu@amlogic.com> References: <20191206074052.15557-1-jian.hu@amlogic.com> MIME-Version: 1.0 X-Originating-IP: [10.28.8.25] X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191205_234117_629572_9329110B X-CRM114-Status: GOOD ( 10.48 ) X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Rob Herring , Victor Wan , Jianxin Pan , devicetree@vger.kernel.org, Martin Blumenstingl , Kevin Hilman , Michael Turquette , linux-kernel@vger.kernel.org, Stephen Boyd , Jian Hu , linux-arm-kernel@lists.infradead.org, Qiufang Dai , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, Chandle Zou Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org The A1 PLL design is different with previous SoCs. The PLL internal analog modules Power-on sequence is different with previous, and thus requires a strict register sequence to enable the PLL. Signed-off-by: Jian Hu --- drivers/clk/meson/clk-pll.c | 21 +++++++++++++++++++++ drivers/clk/meson/clk-pll.h | 1 + drivers/clk/meson/parm.h | 1 + 3 files changed, 23 insertions(+) diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c index ddb1e5634739..4aff31a51589 100644 --- a/drivers/clk/meson/clk-pll.c +++ b/drivers/clk/meson/clk-pll.c @@ -318,6 +318,23 @@ static int meson_clk_pll_enable(struct clk_hw *hw) struct clk_regmap *clk = to_clk_regmap(hw); struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); + /* + * The A1 design is different with previous SoCs.The PLL + * internal analog modules Power-on sequence is different with + * previous, and thus requires a strict register sequence to + * enable the PLL. + */ + if (MESON_PARM_APPLICABLE(&pll->current_en)) { + /* Enable the pll */ + meson_parm_write(clk->map, &pll->en, 1); + udelay(10); + /* Enable the pll self-adaption module current */ + meson_parm_write(clk->map, &pll->current_en, 1); + udelay(40); + meson_parm_write(clk->map, &pll->rst, 1); + meson_parm_write(clk->map, &pll->rst, 0); + } + /* do nothing if the PLL is already enabled */ if (clk_hw_is_enabled(hw)) return 0; @@ -347,6 +364,10 @@ static void meson_clk_pll_disable(struct clk_hw *hw) /* Disable the pll */ meson_parm_write(clk->map, &pll->en, 0); + + /* Disable PLL internal self-adaption module current */ + if (MESON_PARM_APPLICABLE(&pll->current_en)) + meson_parm_write(clk->map, &pll->current_en, 0); } static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h index 367efd0f6410..30f039242a65 100644 --- a/drivers/clk/meson/clk-pll.h +++ b/drivers/clk/meson/clk-pll.h @@ -36,6 +36,7 @@ struct meson_clk_pll_data { struct parm frac; struct parm l; struct parm rst; + struct parm current_en; const struct reg_sequence *init_regs; unsigned int init_count; const struct pll_params_table *table; diff --git a/drivers/clk/meson/parm.h b/drivers/clk/meson/parm.h index 3c9ef1b505ce..c53fb26577e3 100644 --- a/drivers/clk/meson/parm.h +++ b/drivers/clk/meson/parm.h @@ -20,6 +20,7 @@ (((reg) & CLRPMASK(width, shift)) | ((val) << (shift))) #define MESON_PARM_APPLICABLE(p) (!!((p)->width)) +#define MESON_PARM_CURRENT(p) (!!((p)->width)) struct parm { u16 reg_off; From patchwork Fri Dec 6 07:40:49 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jian Hu X-Patchwork-Id: 11275699 X-Patchwork-Delegate: neil.armstrong@linaro.org Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 7F3A413B6 for ; Fri, 6 Dec 2019 07:42:03 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 5629124659 for ; Fri, 6 Dec 2019 07:42:03 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="idKVy7fl" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 5629124659 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=amlogic.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=v9cvGM1V7xK2UXe/IAMlQn9MBT7XYI27c0KiUzoefaM=; b=idKVy7flf0EPfm f0VGtcPBjLR+GiobDYOAJP/dyUyeN9AVekHr2w/oRyc/BpcPVN94Nr5pVHXKY1ylOyRmSufpdmEfs nJE8RfJOSzlkv7Ajc4Xkv36SsjUy3nRlzroZ3U1kNQ0Ku3t4v3128/H8Ohb0/+vLh6fMXZWzgfaoA BtwjdPYphjs8/TAmBM9SArYTkdcNj4/L8r91wiV42sm2fthk7g8WEmGlCOvU7bShcRFYcwGBtEcTw UyB3M/6YKPYEUT//en24qlv9KRLgQ+81I1cZ1BD93EqQFDHv6gDs5FyptNwAXUutW98HmF/DcHnmK ofkJzqb78/+N1LXGhMwA==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8FW-0002T9-RH; Fri, 06 Dec 2019 07:42:02 +0000 Received: from mail-sz.amlogic.com ([211.162.65.117]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8Ep-0001eX-TW; Fri, 06 Dec 2019 07:41:21 +0000 Received: from droid15-sz.amlogic.com (10.28.8.25) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.1591.10; Fri, 6 Dec 2019 15:41:36 +0800 From: Jian Hu To: Jerome Brunet , Neil Armstrong Subject: [PATCH v4 3/6] clk: meson: eeclk: refactor eeclk common driver to support A1 Date: Fri, 6 Dec 2019 15:40:49 +0800 Message-ID: <20191206074052.15557-4-jian.hu@amlogic.com> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191206074052.15557-1-jian.hu@amlogic.com> References: <20191206074052.15557-1-jian.hu@amlogic.com> MIME-Version: 1.0 X-Originating-IP: [10.28.8.25] X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191205_234119_958428_93468453 X-CRM114-Status: GOOD ( 10.48 ) X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Rob Herring , Victor Wan , Jianxin Pan , Martin Blumenstingl , Kevin Hilman , Michael Turquette , linux-kernel@vger.kernel.org, Stephen Boyd , Jian Hu , linux-arm-kernel@lists.infradead.org, Qiufang Dai , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, Chandle Zou Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org Introduce a common probe function for A1 series, the way to get regmap is different between A1 series and the previous series. The register region is only for one clock driver, the function of meson_eeclkc_probe is not fit for A1, So it is necessary to introduce a new function. Signed-off-by: Jian Hu --- drivers/clk/meson/meson-eeclk.c | 59 +++++++++++++++++++++++++++------ drivers/clk/meson/meson-eeclk.h | 1 + 2 files changed, 50 insertions(+), 10 deletions(-) diff --git a/drivers/clk/meson/meson-eeclk.c b/drivers/clk/meson/meson-eeclk.c index a7cb1e7aedc4..12ceb1caabd8 100644 --- a/drivers/clk/meson/meson-eeclk.c +++ b/drivers/clk/meson/meson-eeclk.c @@ -13,25 +13,37 @@ #include "clk-regmap.h" #include "meson-eeclk.h" -int meson_eeclkc_probe(struct platform_device *pdev) +static struct regmap_config clkc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static struct regmap *meson_regmap_resource(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *base; + struct device *dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return ERR_CAST(base); + + return devm_regmap_init_mmio(dev, base, &clkc_regmap_config); +} + +static int meson_common_probe(struct platform_device *pdev, struct regmap *map) { const struct meson_eeclkc_data *data; struct device *dev = &pdev->dev; - struct regmap *map; int ret, i; data = of_device_get_match_data(dev); if (!data) return -EINVAL; - /* Get the hhi system controller node */ - map = syscon_node_to_regmap(of_get_parent(dev->of_node)); - if (IS_ERR(map)) { - dev_err(dev, - "failed to get HHI regmap\n"); - return PTR_ERR(map); - } - if (data->init_count) regmap_multi_reg_write(map, data->init_regs, data->init_count); @@ -54,3 +66,30 @@ int meson_eeclkc_probe(struct platform_device *pdev) return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data->hw_onecell_data); } + +int meson_eeclkc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *map; + + /* Get the hhi system controller node */ + map = syscon_node_to_regmap(of_get_parent(dev->of_node)); + if (IS_ERR(map)) { + dev_err(dev, + "failed to get HHI regmap\n"); + return PTR_ERR(map); + } + + return meson_common_probe(pdev, map); +} + +int meson_clkc_probe(struct platform_device *pdev) +{ + struct regmap *map; + + map = meson_regmap_resource(pdev); + if (IS_ERR(map)) + return PTR_ERR(map); + + return meson_common_probe(pdev, map); +} diff --git a/drivers/clk/meson/meson-eeclk.h b/drivers/clk/meson/meson-eeclk.h index 77316207bde1..a2e9ab3a4f6b 100644 --- a/drivers/clk/meson/meson-eeclk.h +++ b/drivers/clk/meson/meson-eeclk.h @@ -21,5 +21,6 @@ struct meson_eeclkc_data { }; int meson_eeclkc_probe(struct platform_device *pdev); +int meson_clkc_probe(struct platform_device *pdev); #endif /* __MESON_CLKC_H */ From patchwork Fri Dec 6 07:40:50 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jian Hu X-Patchwork-Id: 11275701 X-Patchwork-Delegate: neil.armstrong@linaro.org Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 635B714BD for ; Fri, 6 Dec 2019 07:42:06 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 2DCC624659 for ; Fri, 6 Dec 2019 07:42:06 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="cSV8IFJv" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 2DCC624659 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=amlogic.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=ZCszJ9lmUOKxWNDoq/Lt8lQg/l2/SaPPaoQPmxRKQno=; b=cSV8IFJvrgxelF q4sZn3iQvfv4sO1uuvye+a19NXBpoEAJjVqAJEblfdrGjEaMMiv+ZQY3BDL96ZVmp4iH3JyxsiBJa 7CD1er80yZHxdj0oM/ny1kskCy2UPvgWPERUb0CvuRUqFlz6fqpLLifOS1ugQxy8x9l1KSoPO1TUJ b96dlXxXsQfFhujUmsjoZ+vOC3/dfRuoV6pwls+iU/WOHkRr/5M5b3k5ZepRfzbqkPwfxPChXTkXU M/t6Yy8+iOilamWY7jxlwq+Gn2/VvwgT/BAFOXu1wSdLLRQvpra09X+g6krEhdxpbBI0r2HR3cUi2 6A8piHFUSTpwIgPHsI5w==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8FZ-0002Ww-Ny; Fri, 06 Dec 2019 07:42:05 +0000 Received: from mail-sz.amlogic.com ([211.162.65.117]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8Er-0001eX-SA; Fri, 06 Dec 2019 07:41:24 +0000 Received: from droid15-sz.amlogic.com (10.28.8.25) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.1591.10; Fri, 6 Dec 2019 15:41:36 +0800 From: Jian Hu To: Jerome Brunet , Neil Armstrong Subject: [PATCH v4 4/6] clk: meson: a1: add support for Amlogic A1 PLL clock driver Date: Fri, 6 Dec 2019 15:40:50 +0800 Message-ID: <20191206074052.15557-5-jian.hu@amlogic.com> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191206074052.15557-1-jian.hu@amlogic.com> References: <20191206074052.15557-1-jian.hu@amlogic.com> MIME-Version: 1.0 X-Originating-IP: [10.28.8.25] X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191205_234122_109611_8FBD8A30 X-CRM114-Status: GOOD ( 15.80 ) X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Rob Herring , Victor Wan , Jianxin Pan , Martin Blumenstingl , Kevin Hilman , Michael Turquette , linux-kernel@vger.kernel.org, Stephen Boyd , Jian Hu , linux-arm-kernel@lists.infradead.org, Qiufang Dai , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, Chandle Zou Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org The Amlogic A1 clock includes three drivers: pll clocks, peripheral clocks, CPU clocks. sys pll and CPU clocks will be sent in next patch. Unlike the previous series, there is no EE/AO domain in A1 CLK controllers. Signed-off-by: Jian Hu --- drivers/clk/meson/Kconfig | 10 ++ drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1-pll.c | 334 +++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1-pll.h | 56 +++++++ 4 files changed, 401 insertions(+) create mode 100644 drivers/clk/meson/a1-pll.c create mode 100644 drivers/clk/meson/a1-pll.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index dabeb435d067..14e7936ae18e 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -93,6 +93,16 @@ config COMMON_CLK_AXG_AUDIO Support for the audio clock controller on AmLogic A113D devices, aka axg, Say Y if you want audio subsystem to work. +config COMMON_CLK_A1_PLL + bool + depends on ARCH_MESON + select COMMON_CLK_MESON_EE_CLKC + select COMMON_CLK_MESON_REGMAP + select COMMON_CLK_MESON_PLL + help + Support for the PLL clock controller on Amlogic A113L device, + aka a1. Say Y if you want PLL to work. + config COMMON_CLK_G12A bool depends on ARCH_MESON diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 3939f218587a..71d3b8e6fb8a 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o +obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c new file mode 100644 index 000000000000..b248ac81ddd8 --- /dev/null +++ b/drivers/clk/meson/a1-pll.c @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + */ + +#include +#include +#include +#include "a1-pll.h" +#include "clk-pll.h" +#include "meson-eeclk.h" + +static struct clk_regmap a1_fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = &(const struct clk_parent_data){ + .fw_name = "xtal_fixpll", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_fixed_pll = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixed_pll", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fixed_pll_dco.hw + }, + .num_parents = 1, + /* + * This clock is fclk_div2/3/5's parent, + * However, fclk_div2/3/5 feeds AXI/APB/DDR. + * It is required by the platform to operate correctly. + */ + .flags = CLK_IGNORE_UNUSED, + }, +}; + +static const struct pll_mult_range a1_hifi_pll_mult_range = { + .min = 32, + .max = 64, +}; + +static const struct reg_sequence a1_hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x01800000 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00001100 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x100a1100 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x00302000 }, + { .reg = ANACTRL_HIFIPLL_CTRL0, .def = 0x01f18440 }, +}; + +static struct clk_regmap a1_hifi_pll = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 19, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_STS, + .shift = 31, + .width = 1, + }, + .current_en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 26, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HIFIPLL_CTRL2, + .shift = 6, + .width = 1, + }, + .range = &a1_hifi_pll_mult_range, + .init_regs = a1_hifi_init_regs, + .init_count = ARRAY_SIZE(a1_hifi_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &meson_clk_pll_ops, + .parent_data = &(const struct clk_parent_data){ + .fw_name = "xtal_hifipll", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor a1_fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fclk_div2_div.hw + }, + .num_parents = 1, + /* + * This clock is used by DDR clock in BL2 firmware + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor a1_fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fclk_div3_div.hw + }, + .num_parents = 1, + /* + * This clock is used by APB bus which setted in Romcode + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor a1_fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fclk_div5_div.hw + }, + .num_parents = 1, + /* + * This clock is used by AXI bus which setted in Romcode + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_IS_CRITICAL, + }, +}; + +static struct clk_fixed_factor a1_fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data a1_pll_hw_onecell_data = { + .hws = { + [CLKID_FIXED_PLL_DCO] = &a1_fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &a1_fixed_pll.hw, + [CLKID_HIFI_PLL] = &a1_hifi_pll.hw, + [CLKID_FCLK_DIV2] = &a1_fclk_div2.hw, + [CLKID_FCLK_DIV3] = &a1_fclk_div3.hw, + [CLKID_FCLK_DIV5] = &a1_fclk_div5.hw, + [CLKID_FCLK_DIV7] = &a1_fclk_div7.hw, + [CLKID_FCLK_DIV2_DIV] = &a1_fclk_div2_div.hw, + [CLKID_FCLK_DIV3_DIV] = &a1_fclk_div3_div.hw, + [CLKID_FCLK_DIV5_DIV] = &a1_fclk_div5_div.hw, + [CLKID_FCLK_DIV7_DIV] = &a1_fclk_div7_div.hw, + [NR_PLL_CLKS] = NULL, + }, + .num = NR_PLL_CLKS, +}; + +static struct clk_regmap *const a1_pll_regmaps[] = { + &a1_fixed_pll_dco, + &a1_fixed_pll, + &a1_hifi_pll, + &a1_fclk_div2, + &a1_fclk_div3, + &a1_fclk_div5, + &a1_fclk_div7, +}; + +static const struct meson_eeclkc_data a1_pll_data = { + .regmap_clks = a1_pll_regmaps, + .regmap_clk_num = ARRAY_SIZE(a1_pll_regmaps), + .hw_onecell_data = &a1_pll_hw_onecell_data, +}; +static const struct of_device_id clkc_match_table[] = { + { + .compatible = "amlogic,a1-pll-clkc", + .data = &a1_pll_data + }, + {} +}; + +static struct platform_driver a1_pll_driver = { + .probe = meson_clkc_probe, + .driver = { + .name = "a1-pll-clkc", + .of_match_table = clkc_match_table, + }, +}; + +builtin_platform_driver(a1_pll_driver); diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h new file mode 100644 index 000000000000..8ded267061ad --- /dev/null +++ b/drivers/clk/meson/a1-pll.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#ifndef __A1_PLL_H +#define __A1_PLL_H + +/* PLL register offset */ +#define ANACTRL_FIXPLL_CTRL0 0x0 +#define ANACTRL_FIXPLL_CTRL1 0x4 +#define ANACTRL_FIXPLL_CTRL2 0x8 +#define ANACTRL_FIXPLL_CTRL3 0xc +#define ANACTRL_FIXPLL_CTRL4 0x10 +#define ANACTRL_FIXPLL_STS 0x14 +#define ANACTRL_SYSPLL_CTRL0 0x80 +#define ANACTRL_SYSPLL_CTRL1 0x84 +#define ANACTRL_SYSPLL_CTRL2 0x88 +#define ANACTRL_SYSPLL_CTRL3 0x8c +#define ANACTRL_SYSPLL_CTRL4 0x90 +#define ANACTRL_SYSPLL_STS 0x94 +#define ANACTRL_HIFIPLL_CTRL0 0xc0 +#define ANACTRL_HIFIPLL_CTRL1 0xc4 +#define ANACTRL_HIFIPLL_CTRL2 0xc8 +#define ANACTRL_HIFIPLL_CTRL3 0xcc +#define ANACTRL_HIFIPLL_CTRL4 0xd0 +#define ANACTRL_HIFIPLL_STS 0xd4 +#define ANACTRL_AUDDDS_CTRL0 0x100 +#define ANACTRL_AUDDDS_CTRL1 0x104 +#define ANACTRL_AUDDDS_CTRL2 0x108 +#define ANACTRL_AUDDDS_CTRL3 0x10c +#define ANACTRL_AUDDDS_CTRL4 0x110 +#define ANACTRL_AUDDDS_STS 0x114 +#define ANACTRL_MISCTOP_CTRL0 0x140 +#define ANACTRL_POR_CNTL 0x188 + +/* + * CLKID index values + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/a1-pll-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_FIXED_PLL_DCO 0 +#define CLKID_FCLK_DIV2_DIV 2 +#define CLKID_FCLK_DIV3_DIV 3 +#define CLKID_FCLK_DIV5_DIV 4 +#define CLKID_FCLK_DIV7_DIV 5 +#define NR_PLL_CLKS 11 + +/* include the CLKIDs that have been made part of the DT binding */ +#include + +#endif /* __A1_PLL_H */ From patchwork Fri Dec 6 07:40:51 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jian Hu X-Patchwork-Id: 11275711 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6845D14BD for ; Fri, 6 Dec 2019 07:42:42 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 45F422467A for ; Fri, 6 Dec 2019 07:42:42 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="ovHKGI91" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 45F422467A Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=amlogic.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=MEE7NyMM7aSwy6/lYKTNPvgA0Uje8MPb+AV+PZ5QZlU=; b=ovHKGI91pBUsyg 8mKllSYAZB5b70WdU5VwNeRX3vb/yDn3wRGFwck7+BHhbY8u/bajoOwDN+cVu1JiDjDkuRnFqJ8vI HMkrzhdtTacpHhZ45DbxhMn7cfv6WomQfUvxzB+aFVad9QNQZX/pPdsWNEvx5U4Kof7Ek7y/CYgLg b+HkuOqx6gypvhyqB/fRVJ7Y89DOcUWuDGjAZ64jB5fi/nW/CgiMds/PlEY88MERwZhLqwIfXnent uyYM2Losk2oNjAl+gNTkSwlwVz6aQzUQg55/ekfFUCG2/aW8uUfn7HYsD8iAU/SnJrHkMvpqyEwkt eFYU8K0belMkIUEEX9Qw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8G9-000397-Pk; Fri, 06 Dec 2019 07:42:41 +0000 Received: from mail-sz.amlogic.com ([211.162.65.117]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8Fm-0002jf-2s; Fri, 06 Dec 2019 07:42:22 +0000 Received: from droid15-sz.amlogic.com (10.28.8.25) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.1591.10; Fri, 6 Dec 2019 15:42:47 +0800 From: Jian Hu To: Jerome Brunet , Neil Armstrong Subject: [PATCH v4 5/6] dt-bindings: clock: meson: add A1 peripheral clock controller bindings Date: Fri, 6 Dec 2019 15:40:51 +0800 Message-ID: <20191206074052.15557-6-jian.hu@amlogic.com> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191206074052.15557-1-jian.hu@amlogic.com> References: <20191206074052.15557-1-jian.hu@amlogic.com> MIME-Version: 1.0 X-Originating-IP: [10.28.8.25] X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191205_234218_601217_6896CC11 X-CRM114-Status: UNSURE ( 9.56 ) X-CRM114-Notice: Please train this message. X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Rob Herring , Victor Wan , Jianxin Pan , Martin Blumenstingl , Kevin Hilman , Michael Turquette , linux-kernel@vger.kernel.org, Stephen Boyd , Jian Hu , linux-arm-kernel@lists.infradead.org, Qiufang Dai , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, Chandle Zou Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org Add the documentation to support Amlogic A1 peripheral clock driver, and add A1 peripheral clock controller bindings. Signed-off-by: Jian Hu --- .../bindings/clock/amlogic,a1-clkc.yaml | 70 +++++++++++++ include/dt-bindings/clock/a1-clkc.h | 98 +++++++++++++++++++ 2 files changed, 168 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml create mode 100644 include/dt-bindings/clock/a1-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml new file mode 100644 index 000000000000..dd3ce071834e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/amlogic,a1-clkc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson A/C serials Peripheral Clock Control Unit Device Tree Bindings + +maintainers: + - Neil Armstrong + - Jerome Brunet + - Jian Hu + +properties: + "#clock-cells": + const: 1 + compatible: + - enum: + - amlogic,a1-periphs-clkc + + reg: + maxItems: 1 + + clocks: + minItems: 6 + maxItems: 6 + items: + - description: Input fixed pll div2 + - description: Input fixed pll div3 + - description: Input fixed pll div5 + - description: Input fixed pll div7 + - description: HIFI PLL + - description: Input Oscillator (usually at 24MHz) + + clock-names: + minItems: 6 + maxItems: 6 + items: + - const: fclk_div2 + - const: fclk_div3 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: xtal + +required: + - "#clock-cells" + - compatible + - reg + - clocks + - clock-names + +examples: + - | + clkc_periphs: periphs-clock-controller { + compatible = "amlogic,a1-periphs-clkc"; + reg = <0 0x800 0 0x104>; + #clock-cells = <1>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div3", "fclk_div5", + "fclk_div7", "hifi_pll", "xtal"; + }; diff --git a/include/dt-bindings/clock/a1-clkc.h b/include/dt-bindings/clock/a1-clkc.h new file mode 100644 index 000000000000..1ba01122457c --- /dev/null +++ b/include/dt-bindings/clock/a1-clkc.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#ifndef __A1_CLKC_H +#define __A1_CLKC_H + +#define CLKID_XTAL_FIXPLL 1 +#define CLKID_XTAL_USB_PHY 2 +#define CLKID_XTAL_USB_CTRL 3 +#define CLKID_XTAL_HIFIPLL 4 +#define CLKID_XTAL_SYSPLL 5 +#define CLKID_XTAL_DDS 6 +#define CLKID_SYS_CLK 7 +#define CLKID_CLKTREE 8 +#define CLKID_RESET_CTRL 9 +#define CLKID_ANALOG_CTRL 10 +#define CLKID_PWR_CTRL 11 +#define CLKID_PAD_CTRL 12 +#define CLKID_SYS_CTRL 13 +#define CLKID_TEMP_SENSOR 14 +#define CLKID_AM2AXI_DIV 15 +#define CLKID_SPICC_B 16 +#define CLKID_SPICC_A 17 +#define CLKID_CLK_MSR 18 +#define CLKID_AUDIO 19 +#define CLKID_JTAG_CTRL 20 +#define CLKID_SARADC 21 +#define CLKID_PWM_EF 22 +#define CLKID_PWM_CD 23 +#define CLKID_PWM_AB 24 +#define CLKID_CEC 25 +#define CLKID_I2C_S 26 +#define CLKID_IR_CTRL 27 +#define CLKID_I2C_M_D 28 +#define CLKID_I2C_M_C 29 +#define CLKID_I2C_M_B 30 +#define CLKID_I2C_M_A 31 +#define CLKID_ACODEC 32 +#define CLKID_OTP 33 +#define CLKID_SD_EMMC_A 34 +#define CLKID_USB_PHY 35 +#define CLKID_USB_CTRL 36 +#define CLKID_SYS_DSPB 37 +#define CLKID_SYS_DSPA 38 +#define CLKID_DMA 39 +#define CLKID_IRQ_CTRL 40 +#define CLKID_NIC 41 +#define CLKID_GIC 42 +#define CLKID_UART_C 43 +#define CLKID_UART_B 44 +#define CLKID_UART_A 45 +#define CLKID_SYS_PSRAM 46 +#define CLKID_RSA 47 +#define CLKID_CORESIGHT 48 +#define CLKID_AM2AXI_VAD 49 +#define CLKID_AUDIO_VAD 50 +#define CLKID_AXI_DMC 51 +#define CLKID_AXI_PSRAM 52 +#define CLKID_RAMB 53 +#define CLKID_RAMA 54 +#define CLKID_AXI_SPIFC 55 +#define CLKID_AXI_NIC 56 +#define CLKID_AXI_DMA 57 +#define CLKID_CPU_CTRL 58 +#define CLKID_ROM 59 +#define CLKID_PROC_I2C 60 +#define CLKID_DSPA_SEL 61 +#define CLKID_DSPB_SEL 62 +#define CLKID_DSPA_EN_DSPA 63 +#define CLKID_DSPA_EN_NIC 64 +#define CLKID_DSPB_EN_DSPB 65 +#define CLKID_DSPB_EN_NIC 66 +#define CLKID_RTC_CLK 67 +#define CLKID_CECA_32K 68 +#define CLKID_CECB_32K 69 +#define CLKID_24M 70 +#define CLKID_12M 71 +#define CLKID_FCLK_DIV2_DIVN 72 +#define CLKID_GEN 73 +#define CLKID_SARADC_SEL 74 +#define CLKID_SARADC_CLK 75 +#define CLKID_PWM_A 76 +#define CLKID_PWM_B 77 +#define CLKID_PWM_C 78 +#define CLKID_PWM_D 79 +#define CLKID_PWM_E 80 +#define CLKID_PWM_F 81 +#define CLKID_SPICC 82 +#define CLKID_TS 83 +#define CLKID_SPIFC 84 +#define CLKID_USB_BUS 85 +#define CLKID_SD_EMMC 86 +#define CLKID_PSRAM 87 +#define CLKID_DMC 88 + +#endif /* __A1_CLKC_H */ From patchwork Fri Dec 6 07:40:52 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jian Hu X-Patchwork-Id: 11275715 X-Patchwork-Delegate: neil.armstrong@linaro.org Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A446C13B6 for ; Fri, 6 Dec 2019 07:43:06 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 7317324659 for ; Fri, 6 Dec 2019 07:43:06 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="G76z1uRP" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 7317324659 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=amlogic.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=OAxOVM3XJQUgV+sWSu/KN1F7sj17c0oAyM591ASYRBg=; b=G76z1uRPtYr+FY Y+3w3B/yIS5ELxap3ChQaojQ5V+rNMaKdAU3/DQAVgbGo6smaGAPeotJpbs2E8YpirBYJ2ZOt5CCt qYnPNNunssWXAkpWeZdFzd5xgK8A8NvK5Bysf4JPtRHOH8zMNWunoYb2oHhzbq4cwbJ4bH17n8X7c pOZRD5qGY9hxacEUGV+dk+zp5wW+6RiexViM8kWN0Eb7KqrqkyY1wPp+C6FC6A+QquVcw+bbTYfCD GRAEx0whaKJCNmwT1BeGV4PeIJ1HxscW+honWTF4dzL0jJyp8nXrXpbY3n17eEimgTDthqszijT+O 8oc2NM54fvXSsqJjKfqw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8GX-0003Rz-CM; Fri, 06 Dec 2019 07:43:05 +0000 Received: from mail-sz.amlogic.com ([211.162.65.117]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1id8Fr-0002jf-3Q; Fri, 06 Dec 2019 07:42:32 +0000 Received: from droid15-sz.amlogic.com (10.28.8.25) by mail-sz.amlogic.com (10.28.11.5) with Microsoft SMTP Server id 15.1.1591.10; Fri, 6 Dec 2019 15:42:47 +0800 From: Jian Hu To: Jerome Brunet , Neil Armstrong Subject: [PATCH v4 6/6] clk: meson: a1: add support for Amlogic A1 Peripheral clock driver Date: Fri, 6 Dec 2019 15:40:52 +0800 Message-ID: <20191206074052.15557-7-jian.hu@amlogic.com> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20191206074052.15557-1-jian.hu@amlogic.com> References: <20191206074052.15557-1-jian.hu@amlogic.com> MIME-Version: 1.0 X-Originating-IP: [10.28.8.25] X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20191205_234224_309855_16D8D4F2 X-CRM114-Status: GOOD ( 13.67 ) X-Spam-Score: 0.0 (/) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record X-BeenThere: linux-amlogic@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Rob Herring , Victor Wan , Jianxin Pan , Martin Blumenstingl , Kevin Hilman , Michael Turquette , linux-kernel@vger.kernel.org, Stephen Boyd , Jian Hu , linux-arm-kernel@lists.infradead.org, Qiufang Dai , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, Chandle Zou Sender: "linux-amlogic" Errors-To: linux-amlogic-bounces+patchwork-linux-amlogic=patchwork.kernel.org@lists.infradead.org Add Amlogic Meson A1 peripheral clock driver, it depends on the A1 PLL driver. Signed-off-by: Jian Hu --- drivers/clk/meson/Kconfig | 10 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1.c | 2246 ++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1.h | 120 ++ 4 files changed, 2377 insertions(+) create mode 100644 drivers/clk/meson/a1.c create mode 100644 drivers/clk/meson/a1.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 14e7936ae18e..d6b2b51316b7 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -103,6 +103,16 @@ config COMMON_CLK_A1_PLL Support for the PLL clock controller on Amlogic A113L device, aka a1. Say Y if you want PLL to work. +config COMMON_CLK_A1 + bool + depends on ARCH_MESON + select COMMON_CLK_MESON_EE_CLKC + select COMMON_CLK_MESON_DUALDIV + select COMMON_CLK_MESON_REGMAP + help + Support for the Peripheral clock controller on Amlogic A113L device, + aka a1. Say Y if you want Peripherals to work. + config COMMON_CLK_G12A bool depends on ARCH_MESON diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 71d3b8e6fb8a..0f3890030118 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o +obj-$(CONFIG_COMMON_CLK_A1) += a1.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c new file mode 100644 index 000000000000..76fa5a9e74a5 --- /dev/null +++ b/drivers/clk/meson/a1.c @@ -0,0 +1,2246 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + */ + +#include +#include +#include +#include "a1.h" +#include "clk-dualdiv.h" +#include "meson-eeclk.h" + +/* PLLs clock in gates, its parent is xtal */ +static struct clk_regmap a1_xtal_clktree = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_clktree", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_xtal_fixpll = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_fixpll", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_xtal_usb_phy = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_usb_phy", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_xtal_usb_ctrl = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_usb_ctrl", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_xtal_hifipll = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_hifipll", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_xtal_syspll = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 5, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_syspll", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_xtal_dds = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_dds", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static const struct clk_parent_data sys_clk_parents[] = { + { .fw_name = "xtal" }, + { .fw_name = "fclk_div2"}, + { .fw_name = "fclk_div3"}, + { .fw_name = "fclk_div5"}, +}; + +static struct clk_regmap a1_sys_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_clk_parents, + .num_parents = ARRAY_SIZE(sys_clk_parents), + }, +}; + +static struct clk_regmap a1_sys_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_sys_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_sys_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_sys_b_div.hw + }, + .num_parents = 1, + /* + * This clock is used by APB bus which setted in Romcode + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static struct clk_regmap a1_sys_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_clk_parents, + .num_parents = ARRAY_SIZE(sys_clk_parents), + }, +}; + +static struct clk_regmap a1_sys_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_sys_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_sys_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_sys_a_div.hw + }, + .num_parents = 1, + /* + * This clock is used by APB bus which setted in Romcode + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static struct clk_regmap a1_sys_clk = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_clk", + .ops = &clk_regmap_mux_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_sys_a.hw, &a1_sys_b.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* rtc 32k clock in */ +static struct clk_regmap a1_rtc_32k_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static const struct meson_clk_dualdiv_param a1_32k_div_table[] = { + { + .dual = 1, + .n1 = 733, + .m1 = 8, + .n2 = 732, + .m2 = 11, + }, {} +}; + +static struct clk_regmap a1_rtc_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 28, + .width = 1, + }, + .table = a1_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_rtc_32k_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_rtc_32k_xtal = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_xtal", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_rtc_32k_clkin.hw + }, + .num_parents = 1, + }, +}; + +static u32 rtc_32k_sel[] = { 0, 1 }; + +static struct clk_regmap a1_rtc_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = RTC_CTRL, + .mask = 0x3, + .shift = 0, + .table = rtc_32k_sel, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_rtc_32k_xtal.hw, + &a1_rtc_32k_div.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +struct clk_regmap a1_rtc_clk = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_rtc_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* dsp a clk */ +static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 }; +static const struct clk_parent_data dsp_ab_clk_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, + { .hw = &a1_rtc_clk.hw }, +}; + +static struct clk_regmap a1_dspa_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_clk_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspa_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspa_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspa_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspa_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspa_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_clk_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspa_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspa_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspa_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspa_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspa_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &a1_dspa_a.hw }, + { .hw = &a1_dspa_b.hw }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspa_en_dspa = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en_dspa", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspa_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspa_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspa_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* dsp b clk */ +static struct clk_regmap a1_dspb_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_clk_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspb_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspb_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspb_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspb_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap a1_dspb_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_clk_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_clk_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspb_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspb_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspb_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspb_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap a1_dspb_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspb_a.hw, &a1_dspb_b.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dspb_en_dspb = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en_dspb", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspb_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +static struct clk_regmap a1_dspb_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dspb_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, +}; + +/* 12M/24M clock */ +static struct clk_regmap a1_24m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "24m", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor a1_24m_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "24m_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_24m.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_12m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 10, + }, + .hw.init = &(struct clk_init_data) { + .name = "12m", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_24m_div2.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_fclk_div2_divn_pre = { + .data = &(struct clk_regmap_div_data){ + .offset = CLK12_24_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn_pre", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fclk_div2", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_fclk_div2_divn = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 12, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_fclk_div2_divn_pre.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* gen clk */ +/* + * the second parent is sys_pll_div16, it will complete in the CPU clock, + * the forth parent is the clock measurement source, it relies on + * the clock measurement register configuration. + */ +static u32 gen_clk_table[] = { 0, 1, 3, 5, 6, 7, 8 }; +static const struct clk_parent_data gen_clk_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &a1_rtc_clk.hw }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap a1_gen_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = GEN_CLK_CTRL, + .mask = 0xf, + .shift = 12, + .table = gen_clk_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = gen_clk_parent_data, + .num_parents = ARRAY_SIZE(gen_clk_parent_data), + }, +}; + +static struct clk_regmap a1_gen_div = { + .data = &(struct clk_regmap_div_data){ + .offset = GEN_CLK_CTRL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_gen_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_gen = { + .data = &(struct clk_regmap_gate_data){ + .offset = GEN_CLK_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "gen", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_gen_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_saradc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SAR_ADC_CLK_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &a1_sys_clk.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap a1_saradc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SAR_ADC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_saradc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_saradc_clk = { + .data = &(struct clk_regmap_gate_data){ + .offset = SAR_ADC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "saradc_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_saradc_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* pwm a clk */ +static struct clk_regmap a1_pwm_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &a1_sys_clk.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap a1_pwm_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_pwm_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_a_div.hw + }, + .num_parents = 1, + /* + * The CPU working voltage is controlled by pwm_a + * in BL2 firmware. add the CLK_IGNORE_UNUSED flag + * to avoid changing at runtime. + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +/* pwm b clk */ +static struct clk_regmap a1_pwm_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &a1_sys_clk.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap a1_pwm_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_pwm_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* pwm c clk */ +static struct clk_regmap a1_pwm_c_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &a1_sys_clk.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap a1_pwm_c_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_c_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_pwm_c = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_c", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_c_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* pwm d clk */ +static struct clk_regmap a1_pwm_d_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &a1_sys_clk.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap a1_pwm_d_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_d_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_pwm_d = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_d", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_d_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_ef_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &a1_sys_clk.hw }, + { .fw_name = "fclk_div5", }, + { .hw = &a1_rtc_clk.hw }, +}; + +/* pwm e clk */ +static struct clk_regmap a1_pwm_e_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parent_data, + .num_parents = ARRAY_SIZE(pwm_ef_parent_data), + }, +}; + +static struct clk_regmap a1_pwm_e_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_e_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_pwm_e = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_e", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_e_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* pwm f clk */ +static struct clk_regmap a1_pwm_f_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parent_data, + .num_parents = ARRAY_SIZE(pwm_ef_parent_data), + }, +}; + +static struct clk_regmap a1_pwm_f_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_f_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_pwm_f = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_f", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_pwm_f_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* spicc clk */ + +/* div2 |\ |\ _____ + * ---------| |---DIV--| | | | spicc out + * ---------| | | |-----|GATE |--------- + * ..... |/ | / |_____| + * --------------------|/ + * 24M + */ +static const struct clk_parent_data spicc_parents[] = { + { .fw_name = "fclk_div2"}, + { .fw_name = "fclk_div3"}, + { .fw_name = "fclk_div5"}, + { .fw_name = "hifi_pll" }, +}; + +static struct clk_regmap a1_spicc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_parents, + .num_parents = 4, + }, +}; + +static struct clk_regmap a1_spicc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPICC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_spicc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_spicc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &a1_spicc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_spicc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPICC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_spicc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* ts clk */ +static struct clk_regmap a1_ts_div = { + .data = &(struct clk_regmap_div_data){ + .offset = TS_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_div", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_ts = { + .data = &(struct clk_regmap_gate_data){ + .offset = TS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "ts", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_ts_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* spifc clk */ +static struct clk_regmap a1_spifc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel", + .ops = &clk_regmap_mux_ops, + /* the same parent with spicc */ + .parent_data = spicc_parents, + .num_parents = 4, + }, +}; + +static struct clk_regmap a1_spifc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPIFC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_spifc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_spifc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &a1_spifc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_spifc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPIFC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spifc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_spifc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* usb bus clk */ +static const struct clk_parent_data usb_bus_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &a1_sys_clk.hw }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap a1_usb_bus_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = USB_BUSCLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = usb_bus_parent_data, + .num_parents = ARRAY_SIZE(usb_bus_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_usb_bus_div = { + .data = &(struct clk_regmap_div_data){ + .offset = USB_BUSCLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_usb_bus_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_usb_bus = { + .data = &(struct clk_regmap_gate_data){ + .offset = USB_BUSCLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_bus", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_usb_bus_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* sd emmc clk */ +static const struct clk_parent_data sd_emmc_parents[] = { + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, +}; + +static struct clk_regmap a1_sd_emmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_parents, + .num_parents = 4, + }, +}; + +static struct clk_regmap a1_sd_emmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SD_EMMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_sd_emmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_sd_emmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &a1_sd_emmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_sd_emmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SD_EMMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_sd_emmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_psram_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel", + .ops = &clk_regmap_mux_ops, + /* the same parent with sd_emmc */ + .parent_data = sd_emmc_parents, + .num_parents = 4, + }, +}; + +static struct clk_regmap a1_psram_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PSRAM_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_psram_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_psram_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &a1_psram_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_psram = { + .data = &(struct clk_regmap_gate_data){ + .offset = PSRAM_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "psram", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_psram_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* dmc clk */ +static struct clk_regmap a1_dmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_parents, + .num_parents = 4, + }, +}; + +static struct clk_regmap a1_dmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &a1_dmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_dmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = DMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "dmc", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_dmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* cec A clock */ +static struct clk_regmap a1_ceca_32k_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "ceca_32k_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_ceca_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECA_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = a1_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_ceca_32k_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_ceca_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_ceca_32k_div.hw, + &a1_ceca_32k_clkin.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_ceca_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_ceca_32k_sel_pre.hw, + &a1_rtc_clk.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_ceca_32k_clkout = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_clkout", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_ceca_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* cec B clock */ +static struct clk_regmap a1_cecb_32k_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "cecb_32k_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_cecb_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECB_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = a1_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_cecb_32k_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap a1_cecb_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_cecb_32k_div.hw, + &a1_cecb_32k_clkin.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_cecb_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_cecb_32k_sel_pre.hw, + &a1_rtc_clk.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap a1_cecb_32k_clkout = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_clkout", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &a1_cecb_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +#define MESON_GATE(_name, _reg, _bit) \ + MESON_PCLK(_name, _reg, _bit, &a1_sys_clk.hw) + +static MESON_GATE(a1_clk_tree, SYS_CLK_EN0, 0); +static MESON_GATE(a1_reset_ctrl, SYS_CLK_EN0, 1); +static MESON_GATE(a1_analog_ctrl, SYS_CLK_EN0, 2); +static MESON_GATE(a1_pwr_ctrl, SYS_CLK_EN0, 3); +static MESON_GATE(a1_pad_ctrl, SYS_CLK_EN0, 4); +static MESON_GATE(a1_sys_ctrl, SYS_CLK_EN0, 5); +static MESON_GATE(a1_temp_sensor, SYS_CLK_EN0, 6); +static MESON_GATE(a1_am2axi_dev, SYS_CLK_EN0, 7); +static MESON_GATE(a1_spicc_b, SYS_CLK_EN0, 8); +static MESON_GATE(a1_spicc_a, SYS_CLK_EN0, 9); +static MESON_GATE(a1_clk_msr, SYS_CLK_EN0, 10); +static MESON_GATE(a1_audio, SYS_CLK_EN0, 11); +static MESON_GATE(a1_jtag_ctrl, SYS_CLK_EN0, 12); +static MESON_GATE(a1_saradc, SYS_CLK_EN0, 13); +static MESON_GATE(a1_pwm_ef, SYS_CLK_EN0, 14); +static MESON_GATE(a1_pwm_cd, SYS_CLK_EN0, 15); +static MESON_GATE(a1_pwm_ab, SYS_CLK_EN0, 16); +static MESON_GATE(a1_cec, SYS_CLK_EN0, 17); +static MESON_GATE(a1_i2c_s, SYS_CLK_EN0, 18); +static MESON_GATE(a1_ir_ctrl, SYS_CLK_EN0, 19); +static MESON_GATE(a1_i2c_m_d, SYS_CLK_EN0, 20); +static MESON_GATE(a1_i2c_m_c, SYS_CLK_EN0, 21); +static MESON_GATE(a1_i2c_m_b, SYS_CLK_EN0, 22); +static MESON_GATE(a1_i2c_m_a, SYS_CLK_EN0, 23); +static MESON_GATE(a1_acodec, SYS_CLK_EN0, 24); +static MESON_GATE(a1_otp, SYS_CLK_EN0, 25); +static MESON_GATE(a1_sd_emmc_a, SYS_CLK_EN0, 26); +static MESON_GATE(a1_usb_phy, SYS_CLK_EN0, 27); +static MESON_GATE(a1_usb_ctrl, SYS_CLK_EN0, 28); +static MESON_GATE(a1_sys_dspb, SYS_CLK_EN0, 29); +static MESON_GATE(a1_sys_dspa, SYS_CLK_EN0, 30); +static MESON_GATE(a1_dma, SYS_CLK_EN0, 31); +static MESON_GATE(a1_irq_ctrl, SYS_CLK_EN1, 0); +static MESON_GATE(a1_nic, SYS_CLK_EN1, 1); +static MESON_GATE(a1_gic, SYS_CLK_EN1, 2); +static MESON_GATE(a1_uart_c, SYS_CLK_EN1, 3); +static MESON_GATE(a1_uart_b, SYS_CLK_EN1, 4); +static MESON_GATE(a1_uart_a, SYS_CLK_EN1, 5); +static MESON_GATE(a1_sys_psram, SYS_CLK_EN1, 6); +static MESON_GATE(a1_rsa, SYS_CLK_EN1, 8); +static MESON_GATE(a1_coresight, SYS_CLK_EN1, 9); +static MESON_GATE(a1_am2axi_vad, AXI_CLK_EN, 0); +static MESON_GATE(a1_audio_vad, AXI_CLK_EN, 1); +static MESON_GATE(a1_axi_dmc, AXI_CLK_EN, 3); +static MESON_GATE(a1_axi_psram, AXI_CLK_EN, 4); +static MESON_GATE(a1_ramb, AXI_CLK_EN, 5); +static MESON_GATE(a1_rama, AXI_CLK_EN, 6); +static MESON_GATE(a1_axi_spifc, AXI_CLK_EN, 7); +static MESON_GATE(a1_axi_nic, AXI_CLK_EN, 8); +static MESON_GATE(a1_axi_dma, AXI_CLK_EN, 9); +static MESON_GATE(a1_cpu_ctrl, AXI_CLK_EN, 10); +static MESON_GATE(a1_rom, AXI_CLK_EN, 11); +static MESON_GATE(a1_prod_i2c, AXI_CLK_EN, 12); + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data a1_periphs_hw_onecell_data = { + .hws = { + [CLKID_SYS_B_SEL] = &a1_sys_b_sel.hw, + [CLKID_SYS_B_DIV] = &a1_sys_b_div.hw, + [CLKID_SYS_B] = &a1_sys_b.hw, + [CLKID_SYS_A_SEL] = &a1_sys_a_sel.hw, + [CLKID_SYS_A_DIV] = &a1_sys_a_div.hw, + [CLKID_SYS_A] = &a1_sys_a.hw, + [CLKID_SYS_CLK] = &a1_sys_clk.hw, + [CLKID_XTAL_CLKTREE] = &a1_xtal_clktree.hw, + [CLKID_XTAL_FIXPLL] = &a1_xtal_fixpll.hw, + [CLKID_XTAL_USB_PHY] = &a1_xtal_usb_phy.hw, + [CLKID_XTAL_USB_CTRL] = &a1_xtal_usb_ctrl.hw, + [CLKID_XTAL_HIFIPLL] = &a1_xtal_hifipll.hw, + [CLKID_XTAL_SYSPLL] = &a1_xtal_syspll.hw, + [CLKID_XTAL_DDS] = &a1_xtal_dds.hw, + [CLKID_CLKTREE] = &a1_clk_tree.hw, + [CLKID_RESET_CTRL] = &a1_reset_ctrl.hw, + [CLKID_ANALOG_CTRL] = &a1_analog_ctrl.hw, + [CLKID_PWR_CTRL] = &a1_pwr_ctrl.hw, + [CLKID_PAD_CTRL] = &a1_pad_ctrl.hw, + [CLKID_SYS_CTRL] = &a1_sys_ctrl.hw, + [CLKID_TEMP_SENSOR] = &a1_temp_sensor.hw, + [CLKID_AM2AXI_DIV] = &a1_am2axi_dev.hw, + [CLKID_SPICC_B] = &a1_spicc_b.hw, + [CLKID_SPICC_A] = &a1_spicc_a.hw, + [CLKID_CLK_MSR] = &a1_clk_msr.hw, + [CLKID_AUDIO] = &a1_audio.hw, + [CLKID_JTAG_CTRL] = &a1_jtag_ctrl.hw, + [CLKID_SARADC] = &a1_saradc.hw, + [CLKID_PWM_EF] = &a1_pwm_ef.hw, + [CLKID_PWM_CD] = &a1_pwm_cd.hw, + [CLKID_PWM_AB] = &a1_pwm_ab.hw, + [CLKID_CEC] = &a1_cec.hw, + [CLKID_I2C_S] = &a1_i2c_s.hw, + [CLKID_IR_CTRL] = &a1_ir_ctrl.hw, + [CLKID_I2C_M_D] = &a1_i2c_m_d.hw, + [CLKID_I2C_M_C] = &a1_i2c_m_c.hw, + [CLKID_I2C_M_B] = &a1_i2c_m_b.hw, + [CLKID_I2C_M_A] = &a1_i2c_m_a.hw, + [CLKID_ACODEC] = &a1_acodec.hw, + [CLKID_OTP] = &a1_otp.hw, + [CLKID_SD_EMMC_A] = &a1_sd_emmc_a.hw, + [CLKID_USB_PHY] = &a1_usb_phy.hw, + [CLKID_USB_CTRL] = &a1_usb_ctrl.hw, + [CLKID_SYS_DSPB] = &a1_sys_dspb.hw, + [CLKID_SYS_DSPA] = &a1_sys_dspa.hw, + [CLKID_DMA] = &a1_dma.hw, + [CLKID_IRQ_CTRL] = &a1_irq_ctrl.hw, + [CLKID_NIC] = &a1_nic.hw, + [CLKID_GIC] = &a1_gic.hw, + [CLKID_UART_C] = &a1_uart_c.hw, + [CLKID_UART_B] = &a1_uart_b.hw, + [CLKID_UART_A] = &a1_uart_a.hw, + [CLKID_SYS_PSRAM] = &a1_sys_psram.hw, + [CLKID_RSA] = &a1_rsa.hw, + [CLKID_CORESIGHT] = &a1_coresight.hw, + [CLKID_AM2AXI_VAD] = &a1_am2axi_vad.hw, + [CLKID_AUDIO_VAD] = &a1_audio_vad.hw, + [CLKID_AXI_DMC] = &a1_axi_dmc.hw, + [CLKID_AXI_PSRAM] = &a1_axi_psram.hw, + [CLKID_RAMB] = &a1_ramb.hw, + [CLKID_RAMA] = &a1_rama.hw, + [CLKID_AXI_SPIFC] = &a1_axi_spifc.hw, + [CLKID_AXI_NIC] = &a1_axi_nic.hw, + [CLKID_AXI_DMA] = &a1_axi_dma.hw, + [CLKID_CPU_CTRL] = &a1_cpu_ctrl.hw, + [CLKID_ROM] = &a1_rom.hw, + [CLKID_PROC_I2C] = &a1_prod_i2c.hw, + [CLKID_DSPA_A_SEL] = &a1_dspa_a_sel.hw, + [CLKID_DSPA_A_DIV] = &a1_dspa_a_div.hw, + [CLKID_DSPA_A] = &a1_dspa_a.hw, + [CLKID_DSPA_B_SEL] = &a1_dspa_b_sel.hw, + [CLKID_DSPA_B_DIV] = &a1_dspa_b_div.hw, + [CLKID_DSPA_B] = &a1_dspa_b.hw, + [CLKID_DSPA_SEL] = &a1_dspa_sel.hw, + [CLKID_DSPB_A_SEL] = &a1_dspb_a_sel.hw, + [CLKID_DSPB_A_DIV] = &a1_dspb_a_div.hw, + [CLKID_DSPB_A] = &a1_dspb_a.hw, + [CLKID_DSPB_B_SEL] = &a1_dspb_b_sel.hw, + [CLKID_DSPB_B_DIV] = &a1_dspb_b_div.hw, + [CLKID_DSPB_B] = &a1_dspb_b.hw, + [CLKID_DSPB_SEL] = &a1_dspb_sel.hw, + [CLKID_DSPA_EN_DSPA] = &a1_dspa_en_dspa.hw, + [CLKID_DSPA_EN_NIC] = &a1_dspa_en_nic.hw, + [CLKID_DSPB_EN_DSPB] = &a1_dspb_en_dspb.hw, + [CLKID_DSPB_EN_NIC] = &a1_dspb_en_nic.hw, + [CLKID_24M] = &a1_24m.hw, + [CLKID_24M_DIV2] = &a1_24m_div2.hw, + [CLKID_12M] = &a1_12m.hw, + [CLKID_DIV2_PRE] = &a1_fclk_div2_divn_pre.hw, + [CLKID_FCLK_DIV2_DIVN] = &a1_fclk_div2_divn.hw, + [CLKID_GEN_SEL] = &a1_gen_sel.hw, + [CLKID_GEN_DIV] = &a1_gen_div.hw, + [CLKID_GEN] = &a1_gen.hw, + [CLKID_SARADC_SEL] = &a1_saradc_sel.hw, + [CLKID_SARADC_DIV] = &a1_saradc_div.hw, + [CLKID_SARADC_CLK] = &a1_saradc_clk.hw, + [CLKID_PWM_A_SEL] = &a1_pwm_a_sel.hw, + [CLKID_PWM_A_DIV] = &a1_pwm_a_div.hw, + [CLKID_PWM_A] = &a1_pwm_a.hw, + [CLKID_PWM_B_SEL] = &a1_pwm_b_sel.hw, + [CLKID_PWM_B_DIV] = &a1_pwm_b_div.hw, + [CLKID_PWM_B] = &a1_pwm_b.hw, + [CLKID_PWM_C_SEL] = &a1_pwm_c_sel.hw, + [CLKID_PWM_C_DIV] = &a1_pwm_c_div.hw, + [CLKID_PWM_C] = &a1_pwm_c.hw, + [CLKID_PWM_D_SEL] = &a1_pwm_d_sel.hw, + [CLKID_PWM_D_DIV] = &a1_pwm_d_div.hw, + [CLKID_PWM_D] = &a1_pwm_d.hw, + [CLKID_PWM_E_SEL] = &a1_pwm_e_sel.hw, + [CLKID_PWM_E_DIV] = &a1_pwm_e_div.hw, + [CLKID_PWM_E] = &a1_pwm_e.hw, + [CLKID_PWM_F_SEL] = &a1_pwm_f_sel.hw, + [CLKID_PWM_F_DIV] = &a1_pwm_f_div.hw, + [CLKID_PWM_F] = &a1_pwm_f.hw, + [CLKID_SPICC_SEL] = &a1_spicc_sel.hw, + [CLKID_SPICC_DIV] = &a1_spicc_div.hw, + [CLKID_SPICC_SEL2] = &a1_spicc_sel2.hw, + [CLKID_SPICC] = &a1_spicc.hw, + [CLKID_TS_DIV] = &a1_ts_div.hw, + [CLKID_TS] = &a1_ts.hw, + [CLKID_SPIFC_SEL] = &a1_spifc_sel.hw, + [CLKID_SPIFC_DIV] = &a1_spifc_div.hw, + [CLKID_SPIFC_SEL2] = &a1_spifc_sel2.hw, + [CLKID_SPIFC] = &a1_spifc.hw, + [CLKID_USB_BUS_SEL] = &a1_usb_bus_sel.hw, + [CLKID_USB_BUS_DIV] = &a1_usb_bus_div.hw, + [CLKID_USB_BUS] = &a1_usb_bus.hw, + [CLKID_SD_EMMC_SEL] = &a1_sd_emmc_sel.hw, + [CLKID_SD_EMMC_DIV] = &a1_sd_emmc_div.hw, + [CLKID_SD_EMMC_SEL2] = &a1_sd_emmc_sel2.hw, + [CLKID_SD_EMMC] = &a1_sd_emmc.hw, + [CLKID_PSRAM_SEL] = &a1_psram_sel.hw, + [CLKID_PSRAM_DIV] = &a1_psram_div.hw, + [CLKID_PSRAM_SEL2] = &a1_psram_sel2.hw, + [CLKID_PSRAM] = &a1_psram.hw, + [CLKID_DMC_SEL] = &a1_dmc_sel.hw, + [CLKID_DMC_DIV] = &a1_dmc_div.hw, + [CLKID_DMC_SEL2] = &a1_dmc_sel2.hw, + [CLKID_DMC] = &a1_dmc.hw, + [CLKID_RTC_32K_CLKIN] = &a1_rtc_32k_clkin.hw, + [CLKID_RTC_32K_DIV] = &a1_rtc_32k_div.hw, + [CLKID_RTC_32K_XTAL] = &a1_rtc_32k_xtal.hw, + [CLKID_RTC_32K_SEL] = &a1_rtc_32k_sel.hw, + [CLKID_RTC_CLK] = &a1_rtc_clk.hw, + [CLKID_CECA_32K_CLKIN] = &a1_ceca_32k_clkin.hw, + [CLKID_CECA_32K_DIV] = &a1_ceca_32k_div.hw, + [CLKID_CECA_32K_SEL_PRE] = &a1_ceca_32k_sel_pre.hw, + [CLKID_CECA_32K_SEL] = &a1_ceca_32k_sel.hw, + [CLKID_CECA_32K] = &a1_ceca_32k_clkout.hw, + [CLKID_CECB_32K_CLKIN] = &a1_cecb_32k_clkin.hw, + [CLKID_CECB_32K_DIV] = &a1_cecb_32k_div.hw, + [CLKID_CECB_32K_SEL_PRE] = &a1_cecb_32k_sel_pre.hw, + [CLKID_CECB_32K_SEL] = &a1_cecb_32k_sel.hw, + [CLKID_CECB_32K] = &a1_cecb_32k_clkout.hw, + [NR_CLKS] = NULL, + }, + .num = NR_CLKS, +}; + +/* Convenience table to populate regmap in .probe */ +static struct clk_regmap *const a1_periphs_regmaps[] = { + &a1_xtal_clktree, + &a1_xtal_fixpll, + &a1_xtal_usb_phy, + &a1_xtal_usb_ctrl, + &a1_xtal_hifipll, + &a1_xtal_syspll, + &a1_xtal_dds, + &a1_clk_tree, + &a1_reset_ctrl, + &a1_analog_ctrl, + &a1_pwr_ctrl, + &a1_sys_ctrl, + &a1_temp_sensor, + &a1_am2axi_dev, + &a1_spicc_b, + &a1_spicc_a, + &a1_clk_msr, + &a1_audio, + &a1_jtag_ctrl, + &a1_saradc, + &a1_pwm_ef, + &a1_pwm_cd, + &a1_pwm_ab, + &a1_cec, + &a1_i2c_s, + &a1_ir_ctrl, + &a1_i2c_m_d, + &a1_i2c_m_c, + &a1_i2c_m_b, + &a1_i2c_m_a, + &a1_acodec, + &a1_otp, + &a1_sd_emmc_a, + &a1_usb_phy, + &a1_usb_ctrl, + &a1_sys_dspb, + &a1_sys_dspa, + &a1_dma, + &a1_irq_ctrl, + &a1_nic, + &a1_gic, + &a1_uart_c, + &a1_uart_b, + &a1_uart_a, + &a1_sys_psram, + &a1_rsa, + &a1_coresight, + &a1_am2axi_vad, + &a1_audio_vad, + &a1_axi_dmc, + &a1_axi_psram, + &a1_ramb, + &a1_rama, + &a1_axi_spifc, + &a1_axi_nic, + &a1_axi_dma, + &a1_cpu_ctrl, + &a1_rom, + &a1_prod_i2c, + &a1_dspa_a_sel, + &a1_dspa_a_div, + &a1_dspa_a, + &a1_dspa_b_sel, + &a1_dspa_b_div, + &a1_dspa_b, + &a1_dspa_sel, + &a1_dspb_a_sel, + &a1_dspb_a_div, + &a1_dspb_a, + &a1_dspb_b_sel, + &a1_dspb_b_div, + &a1_dspb_b, + &a1_dspb_sel, + &a1_dspa_en_dspa, + &a1_dspa_en_nic, + &a1_dspb_en_dspb, + &a1_dspb_en_nic, + &a1_24m, + &a1_12m, + &a1_fclk_div2_divn_pre, + &a1_fclk_div2_divn, + &a1_gen_sel, + &a1_gen_div, + &a1_gen, + &a1_saradc_sel, + &a1_saradc_div, + &a1_saradc_clk, + &a1_pwm_a_sel, + &a1_pwm_a_div, + &a1_pwm_a, + &a1_pwm_b_sel, + &a1_pwm_b_div, + &a1_pwm_b, + &a1_pwm_c_sel, + &a1_pwm_c_div, + &a1_pwm_c, + &a1_pwm_d_sel, + &a1_pwm_d_div, + &a1_pwm_d, + &a1_pwm_e_sel, + &a1_pwm_e_div, + &a1_pwm_e, + &a1_pwm_f_sel, + &a1_pwm_f_div, + &a1_pwm_f, + &a1_spicc_sel, + &a1_spicc_div, + &a1_spicc_sel2, + &a1_spicc, + &a1_ts_div, + &a1_ts, + &a1_spifc_sel, + &a1_spifc_div, + &a1_spifc_sel2, + &a1_spifc, + &a1_usb_bus_sel, + &a1_usb_bus_div, + &a1_usb_bus, + &a1_sd_emmc_sel, + &a1_sd_emmc_div, + &a1_sd_emmc_sel2, + &a1_sd_emmc, + &a1_psram_sel, + &a1_psram_div, + &a1_psram_sel2, + &a1_psram, + &a1_dmc_sel, + &a1_dmc_div, + &a1_dmc_sel2, + &a1_dmc, + &a1_sys_b_sel, + &a1_sys_b_div, + &a1_sys_b, + &a1_sys_a_sel, + &a1_sys_a_div, + &a1_sys_a, + &a1_sys_clk, + &a1_rtc_32k_clkin, + &a1_rtc_32k_div, + &a1_rtc_32k_xtal, + &a1_rtc_32k_sel, + &a1_rtc_clk, + &a1_ceca_32k_clkin, + &a1_ceca_32k_div, + &a1_ceca_32k_sel_pre, + &a1_ceca_32k_sel, + &a1_ceca_32k_clkout, + &a1_cecb_32k_clkin, + &a1_cecb_32k_div, + &a1_cecb_32k_sel_pre, + &a1_cecb_32k_sel, + &a1_cecb_32k_clkout, +}; + +static const struct meson_eeclkc_data a1_periphs_data = { + .regmap_clks = a1_periphs_regmaps, + .regmap_clk_num = ARRAY_SIZE(a1_periphs_regmaps), + .hw_onecell_data = &a1_periphs_hw_onecell_data, +}; +static const struct of_device_id clkc_match_table[] = { + { + .compatible = "amlogic,a1-periphs-clkc", + .data = &a1_periphs_data + }, + {} +}; + +static struct platform_driver a1_periphs_driver = { + .probe = meson_clkc_probe, + .driver = { + .name = "a1-periphs-clkc", + .of_match_table = clkc_match_table, + }, +}; + +builtin_platform_driver(a1_periphs_driver); diff --git a/drivers/clk/meson/a1.h b/drivers/clk/meson/a1.h new file mode 100644 index 000000000000..1ae5e04848d6 --- /dev/null +++ b/drivers/clk/meson/a1.h @@ -0,0 +1,120 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#ifndef __A1_H +#define __A1_H + +/* peripheral clock controller register offset */ +#define SYS_OSCIN_CTRL 0x0 +#define RTC_BY_OSCIN_CTRL0 0x4 +#define RTC_BY_OSCIN_CTRL1 0x8 +#define RTC_CTRL 0xc +#define SYS_CLK_CTRL0 0x10 +#define AXI_CLK_CTRL0 0x14 +#define SYS_CLK_EN0 0x1c +#define SYS_CLK_EN1 0x20 +#define AXI_CLK_EN 0x24 +#define DSPA_CLK_EN 0x28 +#define DSPB_CLK_EN 0x2c +#define DSPA_CLK_CTRL0 0x30 +#define DSPB_CLK_CTRL0 0x34 +#define CLK12_24_CTRL 0x38 +#define GEN_CLK_CTRL 0x3c +#define TIMESTAMP_CTRL0 0x40 +#define TIMESTAMP_CTRL1 0x44 +#define TIMESTAMP_CTRL2 0x48 +#define TIMESTAMP_VAL0 0x4c +#define TIMESTAMP_VAL1 0x50 +#define TIMEBASE_CTRL0 0x54 +#define TIMEBASE_CTRL1 0x58 +#define SAR_ADC_CLK_CTRL 0xc0 +#define PWM_CLK_AB_CTRL 0xc4 +#define PWM_CLK_CD_CTRL 0xc8 +#define PWM_CLK_EF_CTRL 0xcc +#define SPICC_CLK_CTRL 0xd0 +#define TS_CLK_CTRL 0xd4 +#define SPIFC_CLK_CTRL 0xd8 +#define USB_BUSCLK_CTRL 0xdc +#define SD_EMMC_CLK_CTRL 0xe0 +#define CECA_CLK_CTRL0 0xe4 +#define CECA_CLK_CTRL1 0xe8 +#define CECB_CLK_CTRL0 0xec +#define CECB_CLK_CTRL1 0xf0 +#define PSRAM_CLK_CTRL 0xf4 +#define DMC_CLK_CTRL 0xf8 +#define FCLK_DIV1_SEL 0xfc +#define TST_CTRL 0x100 + +#define CLKID_XTAL_CLKTREE 0 +#define CLKID_SYS_A_SEL 89 +#define CLKID_SYS_A_DIV 90 +#define CLKID_SYS_A 91 +#define CLKID_SYS_B_SEL 92 +#define CLKID_SYS_B_DIV 93 +#define CLKID_SYS_B 94 +#define CLKID_DSPA_A_SEL 95 +#define CLKID_DSPA_A_DIV 96 +#define CLKID_DSPA_A 97 +#define CLKID_DSPA_B_SEL 98 +#define CLKID_DSPA_B_DIV 99 +#define CLKID_DSPA_B 100 +#define CLKID_DSPB_A_SEL 101 +#define CLKID_DSPB_A_DIV 102 +#define CLKID_DSPB_A 103 +#define CLKID_DSPB_B_SEL 104 +#define CLKID_DSPB_B_DIV 105 +#define CLKID_DSPB_B 106 +#define CLKID_RTC_32K_CLKIN 107 +#define CLKID_RTC_32K_DIV 108 +#define CLKID_RTC_32K_XTAL 109 +#define CLKID_RTC_32K_SEL 110 +#define CLKID_CECB_32K_CLKIN 111 +#define CLKID_CECB_32K_DIV 112 +#define CLKID_CECB_32K_SEL_PRE 113 +#define CLKID_CECB_32K_SEL 114 +#define CLKID_CECA_32K_CLKIN 115 +#define CLKID_CECA_32K_DIV 116 +#define CLKID_CECA_32K_SEL_PRE 117 +#define CLKID_CECA_32K_SEL 118 +#define CLKID_DIV2_PRE 119 +#define CLKID_24M_DIV2 120 +#define CLKID_GEN_SEL 121 +#define CLKID_GEN_DIV 122 +#define CLKID_SARADC_DIV 123 +#define CLKID_PWM_A_SEL 124 +#define CLKID_PWM_A_DIV 125 +#define CLKID_PWM_B_SEL 126 +#define CLKID_PWM_B_DIV 127 +#define CLKID_PWM_C_SEL 128 +#define CLKID_PWM_C_DIV 129 +#define CLKID_PWM_D_SEL 130 +#define CLKID_PWM_D_DIV 131 +#define CLKID_PWM_E_SEL 132 +#define CLKID_PWM_E_DIV 133 +#define CLKID_PWM_F_SEL 134 +#define CLKID_PWM_F_DIV 135 +#define CLKID_SPICC_SEL 136 +#define CLKID_SPICC_DIV 137 +#define CLKID_SPICC_SEL2 138 +#define CLKID_TS_DIV 139 +#define CLKID_SPIFC_SEL 140 +#define CLKID_SPIFC_DIV 141 +#define CLKID_SPIFC_SEL2 142 +#define CLKID_USB_BUS_SEL 143 +#define CLKID_USB_BUS_DIV 144 +#define CLKID_SD_EMMC_SEL 145 +#define CLKID_SD_EMMC_DIV 146 +#define CLKID_SD_EMMC_SEL2 147 +#define CLKID_PSRAM_SEL 148 +#define CLKID_PSRAM_DIV 149 +#define CLKID_PSRAM_SEL2 150 +#define CLKID_DMC_SEL 151 +#define CLKID_DMC_DIV 152 +#define CLKID_DMC_SEL2 153 +#define NR_CLKS 154 + +#include + +#endif /* __A1_H */