From patchwork Thu Dec 19 09:28:41 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivas Kandagatla X-Patchwork-Id: 11302917 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9051E921 for ; Thu, 19 Dec 2019 09:30:43 +0000 (UTC) Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 251142465E for ; Thu, 19 Dec 2019 09:30:43 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=alsa-project.org header.i=@alsa-project.org header.b="PonrnVZk"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="EF25ASGM" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 251142465E Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=linaro.org Authentication-Results: mail.kernel.org; spf=pass smtp.mailfrom=alsa-devel-bounces@alsa-project.org Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 739001668; Thu, 19 Dec 2019 10:29:51 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 739001668 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1576747841; bh=MJNgI5oUy1aP35x9RvOXY+IE4496Cd6lGLC8NHEcllg=; h=From:To:Date:In-Reply-To:References:Cc:Subject:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=PonrnVZkJUye8tqCyI1eEDGEri8sKUyyF5DG5Sf2VT8BS1JBgtgeeGBdV07kKDvQC STiNwVFVnX2h7miCk1dsbPyWqWX0rmr7twWsuM/G0emZ/eXtvW7aOipMMWwYjR/aYk hBjCbg5CG/m+pzes97MTIUx4J1Hm+mnDDzw4kJfw= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id CE303F80268; Thu, 19 Dec 2019 10:29:08 +0100 (CET) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa1.perex.cz (Postfix, from userid 50401) id C65CFF8025A; Thu, 19 Dec 2019 10:29:06 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on alsa1.perex.cz X-Spam-Level: X-Spam-Status: No, score=-0.1 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,SPF_HELO_NONE,SPF_PASS,SURBL_BLOCKED autolearn=disabled version=3.4.0 Received: from mail-wr1-x442.google.com (mail-wr1-x442.google.com [IPv6:2a00:1450:4864:20::442]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 812DDF80234 for ; Thu, 19 Dec 2019 10:29:03 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 812DDF80234 Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="EF25ASGM" Received: by mail-wr1-x442.google.com with SMTP id q10so5196879wrm.11 for ; Thu, 19 Dec 2019 01:29:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=D/zgSAoCVsSdiweHMVDrK8nA0R60nkQkJQGcdVDh1og=; b=EF25ASGMiO9o9j2iG0RLEisgHqXZp7NRwFunGlFbYn8GG0t7TwSN4Dm0k03OX95VHe T25N5TQtJ8B5oxflT2RObxZlksD7Rm6sq3ou77lJPrlWVq5Q5pADNzSeT66QqXmMLplj Rk5D0t7FAa1D5C+TL7plL5X0uOtLi7qfvDmobXBYoOx07dt7Sfa6p5sgNm5/Z81nC7/h N9CdxWD0UST/KVpu7LJ340A31H2m6d+Ib/VcVY21G/GlPRTEFvSzLEIeNbYKMzR/NA9h zU7Q/lSDLjjZm1ZB/frDRkmOJ2O65o5sWFSplsbUMAylSTvJggS8gfJdWnQqTk7AanFd feXQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=D/zgSAoCVsSdiweHMVDrK8nA0R60nkQkJQGcdVDh1og=; b=m0FoUw5Gs7swxVBkn0IJ8rW8JIhLgGQOsS3Ckch7FzcoW9Icmy4DlZyBxHvxGJdaNW qob93QCuj01i+7edQb2YPqSD5kMoZM8HAlXULeD9F98bZ7gb1gNZOD5WVCTxIoHcxh9n tZ9Eurv60h1jwxEQ/LsFnhoVnLNcY2lYfsRaKQT8u5jR0wBqZ2RZ4co2btLJeUu8KCsr AfSmp9ztchrSEULdp6scGtdNpplJ7dNvkEZArm5UocYeibaIaKNVF9xomUpNl3tHX+Yt 5Kt36RQSaD/HXR72FcXomf8k9oVak4CsfZVep17/FcYI1D4F3jWWNlf00AchF0U2K66o nlCg== X-Gm-Message-State: APjAAAXaWXPABcw45RbzVfaUxgLI3Ye4YZBUY3fAXKfOW31ln18FJopS VlKfpnpJdLWkFr6NFeN3DQ/s5w== X-Google-Smtp-Source: APXvYqzLLr8iXOqv4fxdXSc0kDWoKj4xJ4MIR6ix+tIwu1rk1T9aqfQVmC/zYPcEyHFIy1Xm0WxhRA== X-Received: by 2002:adf:fe86:: with SMTP id l6mr8010528wrr.252.1576747742561; Thu, 19 Dec 2019 01:29:02 -0800 (PST) Received: from srini-hackbox.lan (cpc89974-aztw32-2-0-cust43.18-1.cable.virginm.net. [86.30.250.44]) by smtp.gmail.com with ESMTPSA id s1sm5627356wmc.23.2019.12.19.01.29.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 19 Dec 2019 01:29:01 -0800 (PST) From: Srinivas Kandagatla To: vkoul@kernel.org Date: Thu, 19 Dec 2019 09:28:41 +0000 Message-Id: <20191219092842.10885-2-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.21.0 In-Reply-To: <20191219092842.10885-1-srinivas.kandagatla@linaro.org> References: <20191219092842.10885-1-srinivas.kandagatla@linaro.org> MIME-Version: 1.0 Cc: robh@kernel.org, alsa-devel@alsa-project.org, bgoswami@codeaurora.org, linux-kernel@vger.kernel.org, spapothi@codeaurora.org, pierre-louis.bossart@linux.intel.com, lgirdwood@gmail.com, broonie@kernel.org, Srinivas Kandagatla Subject: [alsa-devel] [PATCH v5 1/2] dt-bindings: soundwire: add bindings for Qcom controller X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" This patch adds bindings for Qualcomm soundwire controller. Qualcomm SoundWire Master controller is present in most Qualcomm SoCs either integrated as part of WCD audio codecs via slimbus or as part of SOC I/O. Signed-off-by: Srinivas Kandagatla Reviewed-by: Rob Herring --- .../bindings/soundwire/qcom,sdw.txt | 167 ++++++++++++++++++ 1 file changed, 167 insertions(+) create mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt new file mode 100644 index 000000000000..436547f3b155 --- /dev/null +++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt @@ -0,0 +1,167 @@ +Qualcomm SoundWire Controller Bindings + + +This binding describes the Qualcomm SoundWire Controller along with its +board specific bus parameters. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,soundwire-v..", + Example: + "qcom,soundwire-v1.3.0" + "qcom,soundwire-v1.5.0" + "qcom,soundwire-v1.6.0" +- reg: + Usage: required + Value type: + Definition: the base address and size of SoundWire controller + address space. + +- interrupts: + Usage: required + Value type: + Definition: should specify the SoundWire Controller IRQ + +- clock-names: + Usage: required + Value type: + Definition: should be "iface" for SoundWire Controller interface clock + +- clocks: + Usage: required + Value type: + Definition: should specify the SoundWire Controller interface clock + +- #sound-dai-cells: + Usage: required + Value type: + Definition: must be 1 for digital audio interfaces on the controller. + +- qcom,dout-ports: + Usage: required + Value type: + Definition: must be count of data out ports + +- qcom,din-ports: + Usage: required + Value type: + Definition: must be count of data in ports + +- qcom,ports-offset1: + Usage: required + Value type: + Definition: should specify payload transport window offset1 of each + data port. Out ports followed by In ports. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,ports-offset2: + Usage: required + Value type: + Definition: should specify payload transport window offset2 of each + data port. Out ports followed by In ports. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,ports-sinterval-low: + Usage: required + Value type: + Definition: should be sample interval low of each data port. + Out ports followed by In ports. Used for Sample Interval + calculation. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,ports-word-length: + Usage: optional + Value type: + Definition: should be size of payload channel sample. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,ports-block-pack-mode: + Usage: optional + Value type: + Definition: should be 0 or 1 to indicate the block packing mode. + 0 to indicate Blocks are per Channel + 1 to indicate Blocks are per Port. + Out ports followed by In ports. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,ports-block-group-count: + Usage: optional + Value type: + Definition: should be in range 1 to 4 to indicate how many sample + intervals are combined into a payload. + Out ports followed by In ports. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,ports-lane-control: + Usage: optional + Value type: + Definition: should be in range 0 to 7 to identify which data lane + the data port uses. + Out ports followed by In ports. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,ports-hstart: + Usage: optional + Value type: + Definition: should be number identifying lowerst numbered coloum in + SoundWire Frame, i.e. left edge of the Transport sub-frame + for each port. Values between 0 and 15 are valid. + Out ports followed by In ports. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,ports-hstop: + Usage: optional + Value type: + Definition: should be number identifying highest numbered coloum in + SoundWire Frame, i.e. the right edge of the Transport + sub-frame for each port. Values between 0 and 15 are valid. + Out ports followed by In ports. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +- qcom,dports-type: + Usage: optional + Value type: + Definition: should be one of the following types + 0 for reduced port + 1 for simple ports + 2 for full port + Out ports followed by In ports. + More info in MIPI Alliance SoundWire 1.0 Specifications. + +Note: + More Information on detail of encoding of these fields can be +found in MIPI Alliance SoundWire 1.0 Specifications. + += SoundWire devices +Each subnode of the bus represents SoundWire device attached to it. +The properties of these nodes are defined by the individual bindings. + += EXAMPLE +The following example represents a SoundWire controller on DB845c board +which has controller integrated inside WCD934x codec on SDM845 SoC. + +soundwire: soundwire@c85 { + compatible = "qcom,soundwire-v1.3.0"; + reg = <0xc85 0x20>; + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + clocks = <&wcc>; + clock-names = "iface"; + #sound-dai-cells = <1>; + qcom,dports-type = <0>; + qcom,dout-ports = <6>; + qcom,din-ports = <2>; + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; + + /* Left Speaker */ + left{ + .... + }; + + /* Right Speaker */ + right{ + .... + }; +}; From patchwork Thu Dec 19 09:28:42 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivas Kandagatla X-Patchwork-Id: 11302919 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id AEFFE921 for ; Thu, 19 Dec 2019 09:31:29 +0000 (UTC) Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 418362465E for ; Thu, 19 Dec 2019 09:31:29 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=alsa-project.org header.i=@alsa-project.org header.b="GxULvJMn"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="JmmUxgwr" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 418362465E Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=linaro.org Authentication-Results: mail.kernel.org; spf=pass smtp.mailfrom=alsa-devel-bounces@alsa-project.org Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 6F7C838; Thu, 19 Dec 2019 10:30:37 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 6F7C838 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1576747887; bh=HsEoy9ZC8dMKuTn7BPwppNa5GtVrUBo0JXI3si0bDAM=; h=From:To:Date:In-Reply-To:References:Cc:Subject:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=GxULvJMnbyEdVF2bzZZpPLoP3DCVw+FS7LmrHKUrVGmHgdT1smW0r4l7MBvOYPCEb kS1zR18i6AGqmIma/7XcWWbRSwSAMbSwdAvOgmEUByGvVBFLkezG7SvQtjF7CvLgoG 7kbQiakZhMnJIFqVddhWMNyGRBlsSDyCrJZGdVr0= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id B2214F8026F; Thu, 19 Dec 2019 10:29:12 +0100 (CET) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa1.perex.cz (Postfix, from userid 50401) id EB392F80271; Thu, 19 Dec 2019 10:29:10 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on alsa1.perex.cz X-Spam-Level: X-Spam-Status: No, score=-0.1 required=5.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,SPF_HELO_NONE,SPF_PASS,SURBL_BLOCKED autolearn=disabled version=3.4.0 Received: from mail-wr1-x444.google.com (mail-wr1-x444.google.com [IPv6:2a00:1450:4864:20::444]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 923C6F80259 for ; Thu, 19 Dec 2019 10:29:05 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 923C6F80259 Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="JmmUxgwr" Received: by mail-wr1-x444.google.com with SMTP id y11so5213374wrt.6 for ; Thu, 19 Dec 2019 01:29:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=ezMOM7KmThM9SsxDqgprdFL6N0MgU9v+PCfsf9YLTC8=; b=JmmUxgwrvRhtbSfaMz2pIKLNxxZHnGwyDUD6BxWKiemH6JYK18uYslAyrMeCQrqhd2 j1p4IkUGRK3TdliF/sAfRs4P8XsTZkCjdRD1IOdZka72vjUKfV0H/qqfRTqGgglPrKxO ymfQw+PcGvhdYyuh59QIpsiNgRiLgffBU/bOBvwghhpmZ30/Lr8jkoPTGeubUrRXALYO X4d8FzcNuaXpcVqJbe8Bos4FsdUNgkTkXZJvnkunqc0XZ3v0ALgoXsmKKcf57jpuh1Mq rudXNL6PWewMesnAzd4fYNj+TLrPH0dbB6J+0u2mFSXDMg4tXnEL2Mm2ISKLW+JYRojA QKdw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=ezMOM7KmThM9SsxDqgprdFL6N0MgU9v+PCfsf9YLTC8=; b=Feaj8o4ClYt1UHkkVogJqwozbIm8y0h/Msv/+X6xWi2RxT9OjMdEwhJWxaMSYjuA7F bd3KhR23GvW/uzYwuXSwT4rlY2ZxWz8ldmdfrpC+5ATIJY2OWve9yQjYawKOQbkf+1Eq cN7PbplIoAg8RIc3H+zkoZBlWv8Kzsoj/coPtBQ08/rXakJ5oJf3EGs7hAGEE4emAe1A chttXAhuVqppsP56QOC9qWyA/mngTheAJwPlWrnEtS6rpBHP/VzpucFqHqsBUYeWGLRO P6qk7RvcORD5qWU0x1v7v+3HIEU2zOl9qHN+xjJeThhnm11IYpyv1LVHgSGpsv9/xLzC sJCw== X-Gm-Message-State: APjAAAWsiCMD21IVDn4yk/yx1fZGM+4FdpIT1gLeioTdjvlK1ccTG6nF IgWKYDzchDISXbRgE1OksT+i6w== X-Google-Smtp-Source: APXvYqx3hidTG31D1YZokOrz5tyREjyQjk9bpPqIsQufL0xO3ILeRXtAHyplIyqT1GPrO0uxhQou3g== X-Received: by 2002:adf:f80b:: with SMTP id s11mr7825408wrp.12.1576747744846; Thu, 19 Dec 2019 01:29:04 -0800 (PST) Received: from srini-hackbox.lan (cpc89974-aztw32-2-0-cust43.18-1.cable.virginm.net. [86.30.250.44]) by smtp.gmail.com with ESMTPSA id s1sm5627356wmc.23.2019.12.19.01.29.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 19 Dec 2019 01:29:04 -0800 (PST) From: Srinivas Kandagatla To: vkoul@kernel.org Date: Thu, 19 Dec 2019 09:28:42 +0000 Message-Id: <20191219092842.10885-3-srinivas.kandagatla@linaro.org> X-Mailer: git-send-email 2.21.0 In-Reply-To: <20191219092842.10885-1-srinivas.kandagatla@linaro.org> References: <20191219092842.10885-1-srinivas.kandagatla@linaro.org> MIME-Version: 1.0 Cc: robh@kernel.org, alsa-devel@alsa-project.org, bgoswami@codeaurora.org, linux-kernel@vger.kernel.org, spapothi@codeaurora.org, pierre-louis.bossart@linux.intel.com, lgirdwood@gmail.com, broonie@kernel.org, Srinivas Kandagatla Subject: [alsa-devel] [PATCH v5 2/2] soundwire: qcom: add support for SoundWire controller X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Qualcomm SoundWire Master controller is present in most Qualcomm SoCs either integrated as part of WCD audio codecs via slimbus or as part of SOC I/O. This patchset adds support to a very basic controller which has been tested with WCD934x SoundWire controller connected to WSA881x smart speaker amplifiers. Signed-off-by: Srinivas Kandagatla --- drivers/soundwire/Kconfig | 9 + drivers/soundwire/Makefile | 4 + drivers/soundwire/qcom.c | 856 +++++++++++++++++++++++++++++++++++++ 3 files changed, 869 insertions(+) create mode 100644 drivers/soundwire/qcom.c diff --git a/drivers/soundwire/Kconfig b/drivers/soundwire/Kconfig index c725d0a8b288..fa2b4ab92ed9 100644 --- a/drivers/soundwire/Kconfig +++ b/drivers/soundwire/Kconfig @@ -31,4 +31,13 @@ config SOUNDWIRE_INTEL enable this config option to get the SoundWire support for that device. +config SOUNDWIRE_QCOM + tristate "Qualcomm SoundWire Master driver" + depends on SLIMBUS + depends on SND_SOC + help + SoundWire Qualcomm Master driver. + If you have an Qualcomm platform which has a SoundWire Master then + enable this config option to get the SoundWire support for that + device endif diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile index 563894e5ecaf..e2cdff990e9f 100644 --- a/drivers/soundwire/Makefile +++ b/drivers/soundwire/Makefile @@ -21,3 +21,7 @@ obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel.o soundwire-intel-init-objs := intel_init.o obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel-init.o + +#Qualcomm driver +soundwire-qcom-objs := qcom.o +obj-$(CONFIG_SOUNDWIRE_QCOM) += soundwire-qcom.o diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c new file mode 100644 index 000000000000..98a7076db4ef --- /dev/null +++ b/drivers/soundwire/qcom.c @@ -0,0 +1,856 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2019, Linaro Limited + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "bus.h" + +#define SWRM_COMP_HW_VERSION 0x00 +#define SWRM_COMP_CFG_ADDR 0x04 +#define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK BIT(1) +#define SWRM_COMP_CFG_ENABLE_MSK BIT(0) +#define SWRM_COMP_PARAMS 0x100 +#define SWRM_COMP_PARAMS_DOUT_PORTS_MASK GENMASK(4, 0) +#define SWRM_COMP_PARAMS_DIN_PORTS_MASK GENMASK(9, 5) +#define SWRM_INTERRUPT_STATUS 0x200 +#define SWRM_INTERRUPT_STATUS_RMSK GENMASK(16, 0) +#define SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED BIT(1) +#define SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS BIT(2) +#define SWRM_INTERRUPT_STATUS_CMD_ERROR BIT(7) +#define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED BIT(10) +#define SWRM_INTERRUPT_MASK_ADDR 0x204 +#define SWRM_INTERRUPT_CLEAR 0x208 +#define SWRM_CMD_FIFO_WR_CMD 0x300 +#define SWRM_CMD_FIFO_RD_CMD 0x304 +#define SWRM_CMD_FIFO_CMD 0x308 +#define SWRM_CMD_FIFO_STATUS 0x30C +#define SWRM_CMD_FIFO_CFG_ADDR 0x314 +#define SWRM_RD_WR_CMD_RETRIES 0x7 +#define SWRM_CMD_FIFO_RD_FIFO_ADDR 0x318 +#define SWRM_ENUMERATOR_CFG_ADDR 0x500 +#define SWRM_MCP_FRAME_CTRL_BANK_ADDR(m) (0x101C + 0x40 * (m)) +#define SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT 3 +#define SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK GENMASK(2, 0) +#define SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK GENMASK(7, 3) +#define SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT 0 +#define SWRM_MCP_CFG_ADDR 0x1048 +#define SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK GENMASK(21, 17) +#define SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_SHFT 0x11 +#define SWRM_DEF_CMD_NO_PINGS 0x1f +#define SWRM_MCP_STATUS 0x104C +#define SWRM_MCP_STATUS_BANK_NUM_MASK BIT(0) +#define SWRM_MCP_SLV_STATUS 0x1090 +#define SWRM_MCP_SLV_STATUS_MASK GENMASK(1, 0) +#define SWRM_DP_PORT_CTRL_BANK(n, m) (0x1124 + 0x100 * (n - 1) + 0x40 * m) +#define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT 0x18 +#define SWRM_DP_PORT_CTRL_OFFSET2_SHFT 0x10 +#define SWRM_DP_PORT_CTRL_OFFSET1_SHFT 0x08 +#define SWRM_AHB_BRIDGE_WR_DATA_0 0xc85 +#define SWRM_AHB_BRIDGE_WR_ADDR_0 0xc89 +#define SWRM_AHB_BRIDGE_RD_ADDR_0 0xc8d +#define SWRM_AHB_BRIDGE_RD_DATA_0 0xc91 + +#define SWRM_REG_VAL_PACK(data, dev, id, reg) \ + ((reg) | ((id) << 16) | ((dev) << 20) | ((data) << 24)) + +#define SWRM_MAX_ROW_VAL 0 /* Rows = 48 */ +#define SWRM_DEFAULT_ROWS 48 +#define SWRM_MIN_COL_VAL 0 /* Cols = 2 */ +#define SWRM_DEFAULT_COL 16 +#define SWRM_MAX_COL_VAL 7 +#define SWRM_SPECIAL_CMD_ID 0xF +#define MAX_FREQ_NUM 1 +#define TIMEOUT_MS (2 * HZ) +#define QCOM_SWRM_MAX_RD_LEN 0xf +#define QCOM_SDW_MAX_PORTS 14 +#define DEFAULT_CLK_FREQ 9600000 +#define SWRM_MAX_DAIS 0xF + +struct qcom_swrm_port_config { + u8 si; + u8 off1; + u8 off2; +}; + +struct qcom_swrm_ctrl { + struct sdw_bus bus; + struct device *dev; + struct regmap *regmap; + struct completion *comp; + struct work_struct slave_work; + /* read/write lock */ + spinlock_t comp_lock; + /* Port alloc/free lock */ + struct mutex port_lock; + struct clk *hclk; + u8 wr_cmd_id; + u8 rd_cmd_id; + int irq; + unsigned int version; + int num_din_ports; + int num_dout_ports; + unsigned long dout_port_mask; + unsigned long din_port_mask; + struct qcom_swrm_port_config pconfig[QCOM_SDW_MAX_PORTS]; + struct sdw_stream_runtime *sruntime[SWRM_MAX_DAIS]; + enum sdw_slave_status status[SDW_MAX_DEVICES]; + int (*reg_read)(struct qcom_swrm_ctrl *ctrl, int reg, u32 *val); + int (*reg_write)(struct qcom_swrm_ctrl *ctrl, int reg, int val); +}; + +#define to_qcom_sdw(b) container_of(b, struct qcom_swrm_ctrl, bus) + +static int qcom_swrm_abh_reg_read(struct qcom_swrm_ctrl *ctrl, int reg, + u32 *val) +{ + struct regmap *wcd_regmap = ctrl->regmap; + int ret; + + /* pg register + offset */ + ret = regmap_bulk_write(wcd_regmap, SWRM_AHB_BRIDGE_RD_ADDR_0, + (u8 *)®, 4); + if (ret < 0) + return SDW_CMD_FAIL; + + ret = regmap_bulk_read(wcd_regmap, SWRM_AHB_BRIDGE_RD_DATA_0, + val, 4); + if (ret < 0) + return SDW_CMD_FAIL; + + return SDW_CMD_OK; +} + +static int qcom_swrm_ahb_reg_write(struct qcom_swrm_ctrl *ctrl, + int reg, int val) +{ + struct regmap *wcd_regmap = ctrl->regmap; + int ret; + /* pg register + offset */ + ret = regmap_bulk_write(wcd_regmap, SWRM_AHB_BRIDGE_WR_DATA_0, + (u8 *)&val, 4); + if (ret) + return SDW_CMD_FAIL; + + /* write address register */ + ret = regmap_bulk_write(wcd_regmap, SWRM_AHB_BRIDGE_WR_ADDR_0, + (u8 *)®, 4); + if (ret) + return SDW_CMD_FAIL; + + return SDW_CMD_OK; +} + +static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data, + u8 dev_addr, u16 reg_addr) +{ + DECLARE_COMPLETION_ONSTACK(comp); + unsigned long flags; + u32 val; + int ret; + + spin_lock_irqsave(&ctrl->comp_lock, flags); + ctrl->comp = ∁ + spin_unlock_irqrestore(&ctrl->comp_lock, flags); + val = SWRM_REG_VAL_PACK(cmd_data, dev_addr, + SWRM_SPECIAL_CMD_ID, reg_addr); + ret = ctrl->reg_write(ctrl, SWRM_CMD_FIFO_WR_CMD, val); + if (ret) + goto err; + + ret = wait_for_completion_timeout(ctrl->comp, + msecs_to_jiffies(TIMEOUT_MS)); + + if (!ret) + ret = SDW_CMD_IGNORED; + else + ret = SDW_CMD_OK; +err: + spin_lock_irqsave(&ctrl->comp_lock, flags); + ctrl->comp = NULL; + spin_unlock_irqrestore(&ctrl->comp_lock, flags); + + return ret; +} + +static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl, + u8 dev_addr, u16 reg_addr, + u32 len, u8 *rval) +{ + int i, ret; + u32 val; + DECLARE_COMPLETION_ONSTACK(comp); + unsigned long flags; + + spin_lock_irqsave(&ctrl->comp_lock, flags); + ctrl->comp = ∁ + spin_unlock_irqrestore(&ctrl->comp_lock, flags); + + val = SWRM_REG_VAL_PACK(len, dev_addr, SWRM_SPECIAL_CMD_ID, reg_addr); + ret = ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val); + if (ret) + goto err; + + ret = wait_for_completion_timeout(ctrl->comp, + msecs_to_jiffies(TIMEOUT_MS)); + + if (!ret) { + ret = SDW_CMD_IGNORED; + goto err; + } else { + ret = SDW_CMD_OK; + } + + for (i = 0; i < len; i++) { + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_RD_FIFO_ADDR, &val); + rval[i] = val & 0xFF; + } + +err: + spin_lock_irqsave(&ctrl->comp_lock, flags); + ctrl->comp = NULL; + spin_unlock_irqrestore(&ctrl->comp_lock, flags); + + return ret; +} + +static void qcom_swrm_get_device_status(struct qcom_swrm_ctrl *ctrl) +{ + u32 val; + int i; + + ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &val); + + for (i = 0; i < SDW_MAX_DEVICES; i++) { + u32 s; + + s = (val >> (i * 2)); + s &= SWRM_MCP_SLV_STATUS_MASK; + ctrl->status[i] = s; + } +} + +static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) +{ + struct qcom_swrm_ctrl *ctrl = dev_id; + u32 sts, value; + unsigned long flags; + + ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &sts); + + if (sts & SWRM_INTERRUPT_STATUS_CMD_ERROR) { + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err_ratelimited(ctrl->dev, + "CMD error, fifo status 0x%x\n", + value); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1); + } + + if ((sts & SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED) || + sts & SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS) + schedule_work(&ctrl->slave_work); + + ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, sts); + + if (sts & SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED) { + spin_lock_irqsave(&ctrl->comp_lock, flags); + if (ctrl->comp) + complete(ctrl->comp); + spin_unlock_irqrestore(&ctrl->comp_lock, flags); + } + + return IRQ_HANDLED; +} +static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) +{ + u32 val; + + /* Clear Rows and Cols */ + val = (SWRM_MAX_ROW_VAL << SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT | + SWRM_MIN_COL_VAL << SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT); + + ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val); + + /* Disable Auto enumeration */ + ctrl->reg_write(ctrl, SWRM_ENUMERATOR_CFG_ADDR, 0); + + /* Mask soundwire interrupts */ + ctrl->reg_write(ctrl, SWRM_INTERRUPT_MASK_ADDR, + SWRM_INTERRUPT_STATUS_RMSK); + + /* Configure No pings */ + ctrl->reg_read(ctrl, SWRM_MCP_CFG_ADDR, &val); + val &= ~SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK; + val |= (SWRM_DEF_CMD_NO_PINGS << + SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_SHFT); + ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val); + + /* Configure number of retries of a read/write cmd */ + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES); + + /* Set IRQ to PULSE */ + ctrl->reg_write(ctrl, SWRM_COMP_CFG_ADDR, + SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK | + SWRM_COMP_CFG_ENABLE_MSK); + return 0; +} + +static enum sdw_command_response qcom_swrm_xfer_msg(struct sdw_bus *bus, + struct sdw_msg *msg) +{ + struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus); + int ret, i, len; + + if (msg->flags == SDW_MSG_FLAG_READ) { + for (i = 0; i < msg->len;) { + if ((msg->len - i) < QCOM_SWRM_MAX_RD_LEN) + len = msg->len - i; + else + len = QCOM_SWRM_MAX_RD_LEN; + + ret = qcom_swrm_cmd_fifo_rd_cmd(ctrl, msg->dev_num, + msg->addr + i, len, + &msg->buf[i]); + if (ret) + return ret; + + i = i + len; + } + } else if (msg->flags == SDW_MSG_FLAG_WRITE) { + for (i = 0; i < msg->len; i++) { + ret = qcom_swrm_cmd_fifo_wr_cmd(ctrl, msg->buf[i], + msg->dev_num, + msg->addr + i); + if (ret) + return SDW_CMD_IGNORED; + } + } + + return SDW_CMD_OK; +} + +static int qcom_swrm_pre_bank_switch(struct sdw_bus *bus) +{ + u32 reg = SWRM_MCP_FRAME_CTRL_BANK_ADDR(bus->params.next_bank); + struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus); + u32 val; + + ctrl->reg_read(ctrl, reg, &val); + + val &= ~SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK; + val &= ~SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK; + + val |= (SWRM_MAX_ROW_VAL << SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT | + SWRM_MAX_COL_VAL << SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT); + + return ctrl->reg_write(ctrl, reg, val); +} + +static int qcom_swrm_port_params(struct sdw_bus *bus, + struct sdw_port_params *p_params, + unsigned int bank) +{ + /* TBD */ + return 0; +} + +static int qcom_swrm_transport_params(struct sdw_bus *bus, + struct sdw_transport_params *params, + enum sdw_reg_bank bank) +{ + struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus); + u32 value; + + value = params->offset1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT; + value |= params->offset2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT; + value |= params->sample_interval - 1; + + return ctrl->reg_write(ctrl, + SWRM_DP_PORT_CTRL_BANK((params->port_num), bank), + value); +} + +static int qcom_swrm_port_enable(struct sdw_bus *bus, + struct sdw_enable_ch *enable_ch, + unsigned int bank) +{ + u32 reg = SWRM_DP_PORT_CTRL_BANK(enable_ch->port_num, bank); + struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus); + u32 val; + + ctrl->reg_read(ctrl, reg, &val); + + if (enable_ch->enable) + val |= (enable_ch->ch_mask << SWRM_DP_PORT_CTRL_EN_CHAN_SHFT); + else + val &= ~(0xff << SWRM_DP_PORT_CTRL_EN_CHAN_SHFT); + + return ctrl->reg_write(ctrl, reg, val); +} + +static struct sdw_master_port_ops qcom_swrm_port_ops = { + .dpn_set_port_params = qcom_swrm_port_params, + .dpn_set_port_transport_params = qcom_swrm_transport_params, + .dpn_port_enable_ch = qcom_swrm_port_enable, +}; + +static struct sdw_master_ops qcom_swrm_ops = { + .xfer_msg = qcom_swrm_xfer_msg, + .pre_bank_switch = qcom_swrm_pre_bank_switch, +}; + +static int qcom_swrm_compute_params(struct sdw_bus *bus) +{ + struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus); + struct sdw_master_runtime *m_rt; + struct sdw_slave_runtime *s_rt; + struct sdw_port_runtime *p_rt; + struct qcom_swrm_port_config *pcfg; + int i = 0; + + list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { + list_for_each_entry(p_rt, &m_rt->port_list, port_node) { + pcfg = &ctrl->pconfig[p_rt->num - 1]; + p_rt->transport_params.port_num = p_rt->num; + p_rt->transport_params.sample_interval = pcfg->si + 1; + p_rt->transport_params.offset1 = pcfg->off1; + p_rt->transport_params.offset2 = pcfg->off2; + } + + list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { + list_for_each_entry(p_rt, &s_rt->port_list, port_node) { + pcfg = &ctrl->pconfig[i]; + p_rt->transport_params.port_num = p_rt->num; + p_rt->transport_params.sample_interval = + pcfg->si + 1; + p_rt->transport_params.offset1 = pcfg->off1; + p_rt->transport_params.offset2 = pcfg->off2; + i++; + } + } + } + + return 0; +} + +static u32 qcom_swrm_freq_tbl[MAX_FREQ_NUM] = { + DEFAULT_CLK_FREQ, +}; + +static void qcom_swrm_slave_wq(struct work_struct *work) +{ + struct qcom_swrm_ctrl *ctrl = + container_of(work, struct qcom_swrm_ctrl, slave_work); + + qcom_swrm_get_device_status(ctrl); + sdw_handle_slave_status(&ctrl->bus, ctrl->status); +} + + +static void qcom_swrm_stream_free_ports(struct qcom_swrm_ctrl *ctrl, + struct sdw_stream_runtime *stream) +{ + struct sdw_master_runtime *m_rt; + struct sdw_port_runtime *p_rt; + unsigned long *port_mask; + + mutex_lock(&ctrl->port_lock); + + list_for_each_entry(m_rt, &stream->master_list, stream_node) { + if (m_rt->direction == SDW_DATA_DIR_RX) + port_mask = &ctrl->dout_port_mask; + else + port_mask = &ctrl->din_port_mask; + + list_for_each_entry(p_rt, &m_rt->port_list, port_node) + clear_bit(p_rt->num - 1, port_mask); + } + + mutex_unlock(&ctrl->port_lock); +} + +static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl, + struct sdw_stream_runtime *stream, + struct snd_pcm_hw_params *params, + int direction) +{ + struct sdw_port_config pconfig[QCOM_SDW_MAX_PORTS]; + struct sdw_stream_config sconfig; + struct sdw_master_runtime *m_rt; + struct sdw_slave_runtime *s_rt; + struct sdw_port_runtime *p_rt; + unsigned long *port_mask; + int i, maxport, pn, nports = 0, ret = 0; + + mutex_lock(&ctrl->port_lock); + list_for_each_entry(m_rt, &stream->master_list, stream_node) { + if (m_rt->direction == SDW_DATA_DIR_RX) { + maxport = ctrl->num_dout_ports; + port_mask = &ctrl->dout_port_mask; + } else { + maxport = ctrl->num_din_ports; + port_mask = &ctrl->din_port_mask; + } + + list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { + list_for_each_entry(p_rt, &s_rt->port_list, port_node) { + /* Port numbers start from 1 - 14*/ + pn = find_first_zero_bit(port_mask, maxport); + if (pn > (maxport - 1)) { + dev_err(ctrl->dev, "All ports busy\n"); + ret = -EBUSY; + goto err; + } + set_bit(pn, port_mask); + pconfig[nports].num = pn + 1; + pconfig[nports].ch_mask = p_rt->ch_mask; + nports++; + } + } + } + + if (direction == SNDRV_PCM_STREAM_CAPTURE) + sconfig.direction = SDW_DATA_DIR_TX; + else + sconfig.direction = SDW_DATA_DIR_RX; + + /* hw parameters wil be ignored as we only support PDM */ + sconfig.ch_count = 1; + sconfig.frame_rate = params_rate(params); + sconfig.type = stream->type; + sconfig.bps = 1; + sdw_stream_add_master(&ctrl->bus, &sconfig, pconfig, + nports, stream); +err: + if (ret) { + for (i = 0; i < nports; i++) + clear_bit(pconfig[i].num - 1, port_mask); + } + + mutex_unlock(&ctrl->port_lock); + + return ret; +} + +static int qcom_swrm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); + struct sdw_stream_runtime *sruntime = ctrl->sruntime[dai->id]; + int ret; + + ret = qcom_swrm_stream_alloc_ports(ctrl, sruntime, params, + substream->stream); + if (ret) + qcom_swrm_stream_free_ports(ctrl, sruntime); + + return ret; +} + +static int qcom_swrm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); + struct sdw_stream_runtime *sruntime = ctrl->sruntime[dai->id]; + + qcom_swrm_stream_free_ports(ctrl, sruntime); + sdw_stream_remove_master(&ctrl->bus, sruntime); + + return 0; +} + +static int qcom_swrm_set_sdw_stream(struct snd_soc_dai *dai, + void *stream, int direction) +{ + struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); + + ctrl->sruntime[dai->id] = stream; + + return 0; +} + +static int qcom_swrm_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct sdw_stream_runtime *sruntime; + int ret, i; + + sruntime = sdw_alloc_stream(dai->name); + if (!sruntime) + return -ENOMEM; + + ctrl->sruntime[dai->id] = sruntime; + + for (i = 0; i < rtd->num_codecs; i++) { + ret = snd_soc_dai_set_sdw_stream(rtd->codec_dais[i], sruntime, + substream->stream); + if (ret < 0 && ret != -ENOTSUPP) { + dev_err(dai->dev, "Failed to set sdw stream on %s", + rtd->codec_dais[i]->name); + sdw_release_stream(sruntime); + return ret; + } + } + + return 0; +} + +static void qcom_swrm_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dai->dev); + + sdw_release_stream(ctrl->sruntime[dai->id]); + ctrl->sruntime[dai->id] = NULL; +} + +static const struct snd_soc_dai_ops qcom_swrm_pdm_dai_ops = { + .hw_params = qcom_swrm_hw_params, + .hw_free = qcom_swrm_hw_free, + .startup = qcom_swrm_startup, + .shutdown = qcom_swrm_shutdown, + .set_sdw_stream = qcom_swrm_set_sdw_stream, +}; + +static const struct snd_soc_component_driver qcom_swrm_dai_component = { + .name = "soundwire", +}; + +static int qcom_swrm_register_dais(struct qcom_swrm_ctrl *ctrl) +{ + int num_dais = ctrl->num_dout_ports + ctrl->num_din_ports; + struct snd_soc_dai_driver *dais; + struct snd_soc_pcm_stream *stream; + struct device *dev = ctrl->dev; + int i; + + /* PDM dais are only tested for now */ + dais = devm_kcalloc(dev, num_dais, sizeof(*dais), GFP_KERNEL); + if (!dais) + return -ENOMEM; + + for (i = 0; i < num_dais; i++) { + dais[i].name = devm_kasprintf(dev, GFP_KERNEL, "SDW Pin%d", i); + if (!dais[i].name) + return -ENOMEM; + + if (i < ctrl->num_dout_ports) + stream = &dais[i].playback; + else + stream = &dais[i].capture; + + stream->channels_min = 1; + stream->channels_max = 1; + stream->rates = SNDRV_PCM_RATE_48000; + stream->formats = SNDRV_PCM_FMTBIT_S16_LE; + + dais[i].ops = &qcom_swrm_pdm_dai_ops; + dais[i].id = i; + } + + return devm_snd_soc_register_component(ctrl->dev, + &qcom_swrm_dai_component, + dais, num_dais); +} + +static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) +{ + struct device_node *np = ctrl->dev->of_node; + u8 off1[QCOM_SDW_MAX_PORTS]; + u8 off2[QCOM_SDW_MAX_PORTS]; + u8 si[QCOM_SDW_MAX_PORTS]; + int i, ret, nports, val; + + ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val); + + ctrl->num_dout_ports = val & SWRM_COMP_PARAMS_DOUT_PORTS_MASK; + ctrl->num_din_ports = (val & SWRM_COMP_PARAMS_DIN_PORTS_MASK) >> 5; + + ret = of_property_read_u32(np, "qcom,din-ports", &val); + if (ret) + return ret; + + if (val > ctrl->num_din_ports) + return -EINVAL; + + ctrl->num_din_ports = val; + + ret = of_property_read_u32(np, "qcom,dout-ports", &val); + if (ret) + return ret; + + if (val > ctrl->num_dout_ports) + return -EINVAL; + + ctrl->num_dout_ports = val; + + nports = ctrl->num_dout_ports + ctrl->num_din_ports; + + ret = of_property_read_u8_array(np, "qcom,ports-offset1", + off1, nports); + if (ret) + return ret; + + ret = of_property_read_u8_array(np, "qcom,ports-offset2", + off2, nports); + if (ret) + return ret; + + ret = of_property_read_u8_array(np, "qcom,ports-sinterval-low", + si, nports); + if (ret) + return ret; + + for (i = 0; i < nports; i++) { + ctrl->pconfig[i].si = si[i]; + ctrl->pconfig[i].off1 = off1[i]; + ctrl->pconfig[i].off2 = off2[i]; + } + + return 0; +} + +static int qcom_swrm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sdw_master_prop *prop; + struct sdw_bus_params *params; + struct qcom_swrm_ctrl *ctrl; + int ret; + u32 val; + + ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + + if (dev->parent->bus == &slimbus_bus) { + ctrl->reg_read = qcom_swrm_abh_reg_read; + ctrl->reg_write = qcom_swrm_ahb_reg_write; + ctrl->regmap = dev_get_regmap(dev->parent, NULL); + if (!ctrl->regmap) + return -EINVAL; + } else { + /* Only WCD based SoundWire controller is supported */ + return -ENOTSUPP; + } + + ctrl->irq = of_irq_get(dev->of_node, 0); + if (ctrl->irq < 0) + return ctrl->irq; + + ctrl->hclk = devm_clk_get(dev, "iface"); + if (IS_ERR(ctrl->hclk)) + return PTR_ERR(ctrl->hclk); + + clk_prepare_enable(ctrl->hclk); + + ctrl->dev = dev; + dev_set_drvdata(&pdev->dev, ctrl); + spin_lock_init(&ctrl->comp_lock); + mutex_init(&ctrl->port_lock); + INIT_WORK(&ctrl->slave_work, qcom_swrm_slave_wq); + + ctrl->bus.dev = dev; + ctrl->bus.ops = &qcom_swrm_ops; + ctrl->bus.port_ops = &qcom_swrm_port_ops; + ctrl->bus.compute_params = &qcom_swrm_compute_params; + + ret = qcom_swrm_get_port_config(ctrl); + if (ret) + return ret; + + params = &ctrl->bus.params; + params->max_dr_freq = DEFAULT_CLK_FREQ; + params->curr_dr_freq = DEFAULT_CLK_FREQ; + params->col = SWRM_DEFAULT_COL; + params->row = SWRM_DEFAULT_ROWS; + ctrl->reg_read(ctrl, SWRM_MCP_STATUS, &val); + params->curr_bank = val & SWRM_MCP_STATUS_BANK_NUM_MASK; + params->next_bank = !params->curr_bank; + + prop = &ctrl->bus.prop; + prop->max_clk_freq = DEFAULT_CLK_FREQ; + prop->num_clk_gears = 0; + prop->num_clk_freq = MAX_FREQ_NUM; + prop->clk_freq = &qcom_swrm_freq_tbl[0]; + prop->default_col = SWRM_DEFAULT_COL; + prop->default_row = SWRM_DEFAULT_ROWS; + + ctrl->reg_read(ctrl, SWRM_COMP_HW_VERSION, &ctrl->version); + + ret = devm_request_threaded_irq(dev, ctrl->irq, NULL, + qcom_swrm_irq_handler, + IRQF_TRIGGER_RISING, + "soundwire", ctrl); + if (ret) { + dev_err(dev, "Failed to request soundwire irq\n"); + goto err; + } + + ret = sdw_add_bus_master(&ctrl->bus); + if (ret) { + dev_err(dev, "Failed to register Soundwire controller (%d)\n", + ret); + goto err; + } + + qcom_swrm_init(ctrl); + ret = qcom_swrm_register_dais(ctrl); + if (ret) + goto err; + + dev_info(dev, "Qualcomm Soundwire controller v%x.%x.%x Registered\n", + (ctrl->version >> 24) & 0xff, (ctrl->version >> 16) & 0xff, + ctrl->version & 0xffff); + + return 0; +err: + clk_disable_unprepare(ctrl->hclk); + return ret; +} + +static int qcom_swrm_remove(struct platform_device *pdev) +{ + struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(&pdev->dev); + + sdw_delete_bus_master(&ctrl->bus); + clk_disable_unprepare(ctrl->hclk); + + return 0; +} + +static const struct of_device_id qcom_swrm_of_match[] = { + { .compatible = "qcom,soundwire-v1.3.0", }, + {/* sentinel */}, +}; + +MODULE_DEVICE_TABLE(of, qcom_swrm_of_match); + +static struct platform_driver qcom_swrm_driver = { + .probe = &qcom_swrm_probe, + .remove = &qcom_swrm_remove, + .driver = { + .name = "qcom-soundwire", + .of_match_table = qcom_swrm_of_match, + } +}; +module_platform_driver(qcom_swrm_driver); + +MODULE_DESCRIPTION("Qualcomm soundwire driver"); +MODULE_LICENSE("GPL v2");