From patchwork Thu Mar 26 07:06:07 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sandeep Maheswaram X-Patchwork-Id: 11459411 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id CA606913 for ; Thu, 26 Mar 2020 07:07:19 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9B53D20838 for ; Thu, 26 Mar 2020 07:07:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727600AbgCZHHM (ORCPT ); Thu, 26 Mar 2020 03:07:12 -0400 Received: from alexa-out-blr-01.qualcomm.com ([103.229.18.197]:44937 "EHLO alexa-out-blr-01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726210AbgCZHHM (ORCPT ); Thu, 26 Mar 2020 03:07:12 -0400 Received: from ironmsg01-blr.qualcomm.com ([10.86.208.130]) by alexa-out-blr-01.qualcomm.com with ESMTP/TLS/AES256-SHA; 26 Mar 2020 12:37:08 +0530 Received: from c-sanm-linux.qualcomm.com ([10.206.25.31]) by ironmsg01-blr.qualcomm.com with ESMTP; 26 Mar 2020 12:37:07 +0530 Received: by c-sanm-linux.qualcomm.com (Postfix, from userid 2343233) id 8A47E19BD; Thu, 26 Mar 2020 12:37:06 +0530 (IST) From: Sandeep Maheswaram To: Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Rob Herring , Mark Rutland , Felipe Balbi , Stephen Boyd , Doug Anderson , Matthias Kaehlcke Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Manu Gautam , Sandeep Maheswaram Subject: [PATCH v5 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings Date: Thu, 26 Mar 2020 12:36:07 +0530 Message-Id: <1585206368-685-2-git-send-email-sanm@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1585206368-685-1-git-send-email-sanm@codeaurora.org> References: <1585206368-685-1-git-send-email-sanm@codeaurora.org> Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Convert USB DWC3 bindings to DT schema format using json-schema. Signed-off-by: Sandeep Maheswaram --- .../devicetree/bindings/usb/qcom,dwc3.txt | 104 -------------- .../devicetree/bindings/usb/qcom,dwc3.yaml | 158 +++++++++++++++++++++ 2 files changed, 158 insertions(+), 104 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/qcom,dwc3.txt create mode 100644 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt deleted file mode 100644 index cb695aa..0000000 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ /dev/null @@ -1,104 +0,0 @@ -Qualcomm SuperSpeed DWC3 USB SoC controller - -Required properties: -- compatible: Compatible list, contains - "qcom,dwc3" - "qcom,msm8996-dwc3" for msm8996 SOC. - "qcom,msm8998-dwc3" for msm8998 SOC. - "qcom,sdm845-dwc3" for sdm845 SOC. -- reg: Offset and length of register set for QSCRATCH wrapper -- power-domains: specifies a phandle to PM domain provider node -- clocks: A list of phandle + clock-specifier pairs for the - clocks listed in clock-names -- clock-names: Should contain the following: - "core" Master/Core clock, have to be >= 125 MHz for SS - operation and >= 60MHz for HS operation - "mock_utmi" Mock utmi clock needed for ITP/SOF generation in - host mode. Its frequency should be 19.2MHz. - "sleep" Sleep clock, used for wakeup when USB3 core goes - into low power mode (U3). - -Optional clocks: - "iface" System bus AXI clock. - Not present on "qcom,msm8996-dwc3" compatible. - "cfg_noc" System Config NOC clock. - Not present on "qcom,msm8996-dwc3" compatible. -- assigned-clocks: Should be: - MOCK_UTMI_CLK - MASTER_CLK -- assigned-clock-rates: Should be: - 19.2Mhz (192000000) for MOCK_UTMI_CLK - >=125Mhz (125000000) for MASTER_CLK in SS mode - >=60Mhz (60000000) for MASTER_CLK in HS mode - -Optional properties: -- resets: Phandle to reset control that resets core and wrapper. -- interrupts: specifies interrupts from controller wrapper used - to wakeup from low power/susepnd state. Must contain - one or more entry for interrupt-names property -- interrupt-names: Must include the following entries: - - "hs_phy_irq": The interrupt that is asserted when a - wakeup event is received on USB2 bus - - "ss_phy_irq": The interrupt that is asserted when a - wakeup event is received on USB3 bus - - "dm_hs_phy_irq" and "dp_hs_phy_irq": Separate - interrupts for any wakeup event on DM and DP lines -- qcom,select-utmi-as-pipe-clk: if present, disable USB3 pipe_clk requirement. - Used when dwc3 operates without SSPHY and only - HS/FS/LS modes are supported. - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY -Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY - -Example device nodes: - - hs_phy: phy@100f8800 { - compatible = "qcom,qusb2-v2-phy"; - ... - }; - - ss_phy: phy@100f8830 { - compatible = "qcom,qmp-v3-usb3-phy"; - ... - }; - - usb3_0: usb30@a6f8800 { - compatible = "qcom,dwc3"; - reg = <0xa6f8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; - - clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "core", "mock_utmi", "sleep"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <133000000>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - reset-names = "core_reset"; - power-domains = <&gcc USB30_PRIM_GDSC>; - qcom,select-utmi-as-pipe-clk; - - dwc3@10000000 { - compatible = "snps,dwc3"; - reg = <0x10000000 0xcd00>; - interrupts = <0 205 0x4>; - phys = <&hs_phy>, <&ss_phy>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - }; - }; - diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml new file mode 100644 index 0000000..0f69475 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SuperSpeed DWC3 USB SoC controller + +maintainers: + - Manu Gautam + +properties: + compatible: + items: + - enum: + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sdm845-dwc3 + - const: qcom,dwc3 + + reg: + description: Offset and length of register set for QSCRATCH wrapper + maxItems: 1 + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + power-domains: + description: specifies a phandle to PM domain provider node + maxItems: 1 + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + items: + - description: System Config NOC clock. + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + - description: System bus AXI clock. + - description: Mock utmi clock needed for ITP/SOF generation + in host mode. Its frequency should be 19.2MHz. + - description: Sleep clock, used for wakeup when + USB3 core goes into low power mode (U3). + + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: mock_utmi + - const: sleep + + assigned-clocks: + items: + - description: Phandle and clock specifier of MOCK_UTMI_CLK. + - description: Phandle and clock specifoer of MASTER_CLK. + + assigned-clock-rates: + maxItems: 2 + items: + - description: Must be 19.2MHz (19200000). + - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode. + + resets: + maxItems: 1 + + interrupts: + items: + - description: The interrupt that is asserted + when a wakeup event is received on USB2 bus. + - description: The interrupt that is asserted + when a wakeup event is received on USB3 bus. + - description: Wakeup event on DM line. + - description: Wakeup event on DP line. + + interrupt-names: + items: + - const: hs_phy_irq + - const: ss_phy_irq + - const: dm_hs_phy_irq + - const: dp_hs_phy_irq + + qcom,select-utmi-as-pipe-clk: + description: + If present, disable USB3 pipe_clk requirement. + Used when dwc3 operates without SSPHY and only + HS/FS/LS modes are supported. + type: boolean + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block + The content of the node is defined in dwc3.txt. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - power-domains + - clocks + - clock-names + +examples: + - | + #include + #include + #include + usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = , + , + , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; From patchwork Thu Mar 26 07:06:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sandeep Maheswaram X-Patchwork-Id: 11459407 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1768913A4 for ; Thu, 26 Mar 2020 07:07:18 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id EB6CF20772 for ; Thu, 26 Mar 2020 07:07:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727724AbgCZHHO (ORCPT ); Thu, 26 Mar 2020 03:07:14 -0400 Received: from alexa-out-blr-01.qualcomm.com ([103.229.18.197]:38910 "EHLO alexa-out-blr-01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726289AbgCZHHO (ORCPT ); Thu, 26 Mar 2020 03:07:14 -0400 Received: from ironmsg01-blr.qualcomm.com ([10.86.208.130]) by alexa-out-blr-01.qualcomm.com with ESMTP/TLS/AES256-SHA; 26 Mar 2020 12:37:11 +0530 Received: from c-sanm-linux.qualcomm.com ([10.206.25.31]) by ironmsg01-blr.qualcomm.com with ESMTP; 26 Mar 2020 12:37:10 +0530 Received: by c-sanm-linux.qualcomm.com (Postfix, from userid 2343233) id B517919BD; Thu, 26 Mar 2020 12:37:09 +0530 (IST) From: Sandeep Maheswaram To: Andy Gross , Bjorn Andersson , Greg Kroah-Hartman , Rob Herring , Mark Rutland , Felipe Balbi , Stephen Boyd , Doug Anderson , Matthias Kaehlcke Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Manu Gautam , Sandeep Maheswaram Subject: [PATCH v5 2/2] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180 Date: Thu, 26 Mar 2020 12:36:08 +0530 Message-Id: <1585206368-685-3-git-send-email-sanm@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1585206368-685-1-git-send-email-sanm@codeaurora.org> References: <1585206368-685-1-git-send-email-sanm@codeaurora.org> Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add compatible for SC7180 in usb dwc3 bindings. Signed-off-by: Sandeep Maheswaram Reviewed-by: Douglas Anderson Acked-by: Rob Herring Reviewed-by: Stephen Boyd --- Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 0f69475..17e22ff 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -16,6 +16,7 @@ properties: - enum: - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 + - qcom,sc7180-dwc3 - qcom,sdm845-dwc3 - const: qcom,dwc3