From patchwork Fri May 1 17:51:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 11523107 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B57E614B4 for ; Fri, 1 May 2020 18:00:05 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9BEAD21775 for ; Fri, 1 May 2020 18:00:05 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="jCsveAiu" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730153AbgEASAB (ORCPT ); Fri, 1 May 2020 14:00:01 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:43186 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730060AbgEASAB (ORCPT ); Fri, 1 May 2020 14:00:01 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 041HxxL6101208; Fri, 1 May 2020 12:59:59 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1588355999; bh=ENgHtxzHhUhwwp/K0N0DQtW6E3n6PsibY7hXGHIvBm0=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=jCsveAiuQQ4G+2ILM6B0aLRu/A3KIbPtYwZYJOlmRhSMjthvjZLBheGe5131zBP+C zEWMJGUWDcQSpGo2j0K8yS4gaviqzM7K4cioEyCueSO+uvLF3ciXna7fFDUiQaHXmX 7SMFJ81sizi/E14EZbHyt05+OGKkvI0NcfveEudc= Received: from DLEE114.ent.ti.com (dlee114.ent.ti.com [157.170.170.25]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 041HxxsH107711 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 1 May 2020 12:59:59 -0500 Received: from DLEE104.ent.ti.com (157.170.170.34) by DLEE114.ent.ti.com (157.170.170.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Fri, 1 May 2020 12:59:59 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DLEE104.ent.ti.com (157.170.170.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Fri, 1 May 2020 12:59:58 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id 041Hxwqj127272; Fri, 1 May 2020 12:59:58 -0500 From: Dan Murphy To: CC: , , , Dan Murphy , Guru Das Srinagesh Subject: [PATCH v5 1/3] power_supply: Add additional health properties to the header Date: Fri, 1 May 2020 12:51:16 -0500 Message-ID: <20200501175118.26226-2-dmurphy@ti.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200501175118.26226-1-dmurphy@ti.com> References: <20200501175118.26226-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add HEALTH_WARM, HEALTH_COOL and HEALTH_HOT to the health enum. Tested-by: Guru Das Srinagesh Signed-off-by: Dan Murphy --- Documentation/ABI/testing/sysfs-class-power | 2 +- drivers/power/supply/power_supply_sysfs.c | 2 +- include/linux/power_supply.h | 3 +++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index bf3b48f022dc..9f3fd01a9373 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -190,7 +190,7 @@ Description: Valid values: "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", "Watchdog timer expire", "Safety timer expire", - "Over current" + "Over current", "Warm", "Cool", "Hot" What: /sys/class/power_supply//precharge_current Date: June 2017 diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c index f37ad4eae60b..d0d549611794 100644 --- a/drivers/power/supply/power_supply_sysfs.c +++ b/drivers/power/supply/power_supply_sysfs.c @@ -61,7 +61,7 @@ static const char * const power_supply_charge_type_text[] = { static const char * const power_supply_health_text[] = { "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", "Watchdog timer expire", - "Safety timer expire", "Over current" + "Safety timer expire", "Over current", "Warm", "Cool", "Hot" }; static const char * const power_supply_technology_text[] = { diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index dcd5a71e6c67..8670e90c1d51 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -61,6 +61,9 @@ enum { POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE, POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE, POWER_SUPPLY_HEALTH_OVERCURRENT, + POWER_SUPPLY_HEALTH_WARM, + POWER_SUPPLY_HEALTH_COOL, + POWER_SUPPLY_HEALTH_HOT, }; enum { From patchwork Fri May 1 17:51:17 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 11523111 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B0D7715AB for ; Fri, 1 May 2020 18:02:13 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 98B6F208DB for ; Fri, 1 May 2020 18:02:13 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="HtTbWt0e" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729609AbgEASCK (ORCPT ); Fri, 1 May 2020 14:02:10 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:33616 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729599AbgEASCK (ORCPT ); Fri, 1 May 2020 14:02:10 -0400 Received: from lelv0266.itg.ti.com ([10.180.67.225]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 041I28nJ043044; Fri, 1 May 2020 13:02:08 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1588356128; bh=yGnuyaql2OihOk/f8RBTV56LnwcUhwGV6AH75gvHuDg=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=HtTbWt0e92Y1ufpp4093A6PI5IkwO1vKMYk8kgpvehaBsKNpKo3teF/rkEdS2aRA6 N2osuE4gApT7cHjB02W8eBSdJWydyNhSQnqM2bFpEZx8rRImUY3KmhWke5anz5V3UG ADaCWcsCLn5MNBZ19CVKEP8MjnGQFB946OL767Rk= Received: from DFLE112.ent.ti.com (dfle112.ent.ti.com [10.64.6.33]) by lelv0266.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 041I289F065464 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 1 May 2020 13:02:08 -0500 Received: from DFLE101.ent.ti.com (10.64.6.22) by DFLE112.ent.ti.com (10.64.6.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Fri, 1 May 2020 12:59:59 -0500 Received: from lelv0327.itg.ti.com (10.180.67.183) by DFLE101.ent.ti.com (10.64.6.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Fri, 1 May 2020 12:59:58 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 041HxwxB122297; Fri, 1 May 2020 12:59:59 -0500 From: Dan Murphy To: CC: , , , Ricardo Rivera-Matos , Rob Herring Subject: [PATCH v5 2/3] Add the bindings for the bq25150 and bq25155 500mA charging ICs from Texas Instruments. Date: Fri, 1 May 2020 12:51:17 -0500 Message-ID: <20200501175118.26226-3-dmurphy@ti.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200501175118.26226-1-dmurphy@ti.com> References: <20200501175118.26226-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Ricardo Rivera-Matos Description: The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearbale devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller. Datasheets: http://www.ti.com/lit/ds/symlink/bq25150.pdf http://www.ti.com/lit/ds/symlink/bq25155.pdf CC: Rob Herring Signed-off-by: Ricardo Rivera-Matos --- .../bindings/power/supply/bq2515x.yaml | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml new file mode 100644 index 000000000000..673caf67a993 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/bq2515x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI bq2515x 500-mA Linear charger family + +maintainers: + - Dan Murphy + +description: | + The BQ2515x family is a highly integrated battery charge management IC that + integrates the most common functions for wearable devices, namely a charger, + an output voltage rail, ADC for battery and system monitoring, and + push-button controller. + + Specifications about the charger can be found at: + http://www.ti.com/lit/ds/symlink/bq25150.pdf + http://www.ti.com/lit/ds/symlink/bq25155.pdf + +properties: + compatible: + enum: + - ti,bq25150 + - ti,bq25155 + + reg: + maxItems: 1 + + ac_detect-gpios: + description: | + GPIO used for connecting the bq2515x device PG (AC Detect) + pin. This pin should be used if possible as this is the + recommended way to obtain the charger's input PG state. + If this pin is not specified a software-based approach for PG + detection is used. + + reset-gpios: + description: | + GPIO used for hardware reset. + + low-power-gpios: + description: | + GPIO used for low power mode of IC. + + charge-enable-gpios: + description: | + GPIO used to turn on and off charging. + + constant-charge-current-max-microamp: + description: | + Maximum charging current in micro Amps. + minimum: 50000 + maximum: 600000 + + precharge-current-max-microamp: + description: | + Maximum precharging current in micro Amps. + minimum: 1250 + maximum: 77500 + + input-current-limit-microamp: + description: | + Maximum input current in micro Amps. + minimum: 50000 + maximum: 500000 + + constant-charge-voltage-max-microvolt: + description: | + Maximum charging voltage in micro volts. + minimum: 3600000 + maximum: 4600000 + +required: + - compatible + - reg + +examples: + - | + #include + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + charger@6b { + compatible = "ti,bq25150"; + reg = <0x6b>; + + ac_detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + low-power-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + constant-charge-current-max-microamp = <300000>; + constant-charge-voltage-max-microvolt = <4200000>; + precharge-current-max-microamp = <2500>; + input-current-limit-microamp = <100000>; + }; + }; From patchwork Fri May 1 17:51:18 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 11523113 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 3B4F91392 for ; Fri, 1 May 2020 18:02:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0F0ED2184D for ; Fri, 1 May 2020 18:02:43 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="uqxL5v/Q" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729161AbgEASCm (ORCPT ); Fri, 1 May 2020 14:02:42 -0400 Received: from lelv0143.ext.ti.com ([198.47.23.248]:50142 "EHLO lelv0143.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729419AbgEASCl (ORCPT ); Fri, 1 May 2020 14:02:41 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 041I2dIN106362; Fri, 1 May 2020 13:02:39 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1588356159; bh=CuglabXvlqUAtLRSXCqNaInX3igzCGhmNFGq2d6r3AY=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=uqxL5v/QxiLXlKNdPmRryX0fZT/I8LZ+66l1B0FFdqNzhai5c939o0RmjThtKnGvo WceBdv4lER+BbHr4yHz/gNphRS3eHfgaKH85xNUqoUBYTAfSrCXmpNISLZ+GccluBW kXIZOlq/kOS0Pay5Ezlnqmkm8yXo/VnIQ5x0aaWA= Received: from DLEE108.ent.ti.com (dlee108.ent.ti.com [157.170.170.38]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 041I2die082663 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 1 May 2020 13:02:39 -0500 Received: from DLEE115.ent.ti.com (157.170.170.26) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Fri, 1 May 2020 12:59:59 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DLEE115.ent.ti.com (157.170.170.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Fri, 1 May 2020 12:59:59 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 041Hxx68044923; Fri, 1 May 2020 12:59:59 -0500 From: Dan Murphy To: CC: , , , Ricardo Rivera-Matos Subject: [PATCH v5 3/3] power: supply: bq25150 introduce the bq25150 Date: Fri, 1 May 2020 12:51:18 -0500 Message-ID: <20200501175118.26226-4-dmurphy@ti.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200501175118.26226-1-dmurphy@ti.com> References: <20200501175118.26226-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Ricardo Rivera-Matos Introduce the bq2515x family of chargers. Description: The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearbale devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller. Datasheets: bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf Signed-off-by: Ricardo Rivera-Matos --- drivers/power/supply/Kconfig | 8 + drivers/power/supply/Makefile | 1 + drivers/power/supply/bq2515x_charger.c | 1170 ++++++++++++++++++++++++ 3 files changed, 1179 insertions(+) create mode 100644 drivers/power/supply/bq2515x_charger.c diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index f3424fdce341..7732c5586fc2 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -589,6 +589,14 @@ config CHARGER_BQ24735 help Say Y to enable support for the TI BQ24735 battery charger. +config CHARGER_BQ2515X + tristate "TI BQ2515X battery charger family" + depends on I2C + depends on GPIOLIB || COMPILE_TEST + select REGMAP_I2C + help + Say Y to enable support for the TI BQ2515X battery charger. + config CHARGER_BQ25890 tristate "TI BQ25890 battery charger driver" depends on I2C diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 6c7da920ea83..8fcc175a7e22 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -80,6 +80,7 @@ obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o +obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c new file mode 100644 index 000000000000..c10789235982 --- /dev/null +++ b/drivers/power/supply/bq2515x_charger.c @@ -0,0 +1,1170 @@ +// SPDX-License-Identifier: GPL-2.0 +// BQ2515X Battery Charger Driver +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BQ2515X_MANUFACTURER "Texas Instruments" + +#define BQ2515X_STAT0 0x00 +#define BQ2515X_STAT1 0x01 +#define BQ2515X_STAT2 0x02 +#define BQ2515X_FLAG0 0x03 +#define BQ2515X_FLAG1 0x04 +#define BQ2515X_FLAG2 0x05 +#define BQ2515X_FLAG3 0x06 +#define BQ2515X_MASK0 0x07 +#define BQ2515X_MASK1 0x08 +#define BQ2515X_MASK2 0x09 +#define BQ2515X_MASK3 0x0a +#define BQ2515X_VBAT_CTRL 0x12 +#define BQ2515X_ICHG_CTRL 0x13 +#define BQ2515X_PCHRGCTRL 0x14 +#define BQ2515X_TERMCTRL 0x15 +#define BQ2515X_BUVLO 0x16 +#define BQ2515X_CHARGERCTRL0 0x17 +#define BQ2515X_CHARGERCTRL1 0x18 +#define BQ2515X_ILIMCTRL 0x19 +#define BQ2515X_LDOCTRL 0x1d +#define BQ2515X_MRCTRL 0x30 +#define BQ2515X_ICCTRL0 0x35 +#define BQ2515X_ICCTRL1 0x36 +#define BQ2515X_ICCTRL2 0x37 +#define BQ2515X_ADCCTRL0 0x40 +#define BQ2515X_ADCCTRL1 0x41 +#define BQ2515X_ADC_VBAT_M 0x42 +#define BQ2515X_ADC_VBAT_L 0x43 +#define BQ2515X_ADC_TS_M 0x44 +#define BQ2515X_ADC_TS_L 0x45 +#define BQ2515X_ADC_ICHG_M 0x46 +#define BQ2515X_ADC_ICHG_L 0x47 +#define BQ2515X_ADC_ADCIN_M 0x48 +#define BQ2515X_ADC_ADCIN_L 0x49 +#define BQ2515X_ADC_VIN_M 0x4a +#define BQ2515X_ADC_VIN_L 0x4b +#define BQ2515X_ADC_PMID_M 0x4c +#define BQ2515X_ADC_PMID_L 0x4d +#define BQ2515X_ADC_IIN_M 0x4e +#define BQ2515X_ADC_IIN_L 0x4f +#define BQ2515X_ADC_COMP1_M 0x52 +#define BQ2515X_ADC_COMP1_L 0X53 +#define BQ2515X_ADC_COMP2_M 0X54 +#define BQ2515X_ADC_COMP2_L 0x55 +#define BQ2515X_ADC_COMP3_M 0x56 +#define BQ2515X_ADC_COMP3_L 0x57 +#define BQ2515X_ADC_READ_EN 0x58 +#define BQ2515X_TS_FASTCHGCTRL 0x61 +#define BQ2515X_TS_COLD 0x62 +#define BQ2515X_TS_COOL 0x63 +#define BQ2515X_TS_WARM 0x64 +#define BQ2515X_TS_HOT 0x65 +#define BQ2515X_DEVICE_ID 0x6f + +#define BQ2515X_DEFAULT_ICHG_UA 10000 +#define BQ25150_DEFAULT_ILIM_UA 100000 +#define BQ25155_DEFAULT_ILIM_UA 500000 +#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000 +#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500 + +#define BQ2515X_DIVISOR 65536 +#define BQ2515X_VBAT_BASE_VOLT 3600000 +#define BQ2515X_VBAT_REG_MAX 4600000 +#define BQ2515X_VBAT_REG_MIN 3600000 +#define BQ2515X_VBAT_STEP_UV 10000 +#define BQ2515X_UV_FACTOR 1000000 +#define BQ2515X_ICHG_DIVISOR 52429 +#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750 +#define BQ2515X_ICHG_MIN_UA 0 +#define BQ2515X_ICHG_MAX_UA 500000 +#define BQ2515X_ICHG_RNG_1B0_UA 1250 +#define BQ2515X_ICHG_RNG_1B1_UA 2500 +#define BQ2515X_VLOWV_SEL_1B0_UV 3000000 +#define BQ2515X_VLOWV_SEL_1B1_UV 2800000 +#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750 +#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500 +#define BQ2515X_TWAKE2_MIN_US 1700000 +#define BQ2515X_TWAKE2_MAX_US 2300000 + +#define BQ2515X_ILIM_150MA 0x2 +#define BQ2515X_ILIM_MASK 0x7 +#define BQ2515X_HEALTH_MASK 0xf +#define BQ2515X_ICHGRNG_MASK 0x80 +#define BQ2515X_STAT0_MASK 0x0f +#define BQ2515X_STAT1_MASK 0x1f +#define BQ2515X_PRECHARGE_MASK 0x1f + +#define BQ2515X_TS_HOT_STAT BIT(0) +#define BQ2515X_TS_WARM_STAT BIT(1) +#define BQ2515X_TS_COOL_STAT BIT(2) +#define BQ2515X_TS_COLD_STAT BIT(3) +#define BQ2515X_SAFETY_TIMER_EXP BIT(5) + +#define BQ2515X_VIN_GOOD BIT(0) +#define BQ2515X_CHRG_DONE BIT(5) +#define BQ2515X_CV_CHRG_MODE BIT(6) + +#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7) + +#define BQ2515X_WATCHDOG_DISABLE BIT(4) + +#define BQ2515X_ICHARGE_RANGE BIT(7) + +#define BQ2515X_VLOWV_SEL BIT(5) + +#define BQ2515X_CHARGER_DISABLE BIT(0) + +#define BQ2515X_HWRESET_14S_WD BIT(1) + +static const int bq2515x_ilim_lvl_values[] = { + 50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000 +}; + +/** + * struct bq2515x_init_data - + * @icgh: fast charge current + * @vreg: charge voltage + * @ilim: input current limit + * @iprecharge: precharge current + */ +struct bq2515x_init_data { + int ichg; + int vreg; + int ilim; + int iprecharge; +}; + +enum bq2515x_id { + BQ25150, + BQ25155, +}; + +/** + * struct bq2515x_device - + * @mains: mains properties + * @battery: battery properties + * @client: i2c client structure + * @regmap: register map structure + * @dev: device structure + * @lock: thread lock structure + * @id: enumeration of device ids + * + * @reset_gpio: manual reset (MR) pin + * @lp_gpio: low power mode pin + * @ac_detect_gpio: power good (PG) pin + * @ce_gpio: charge enable (CE) pin + * + * @model_name: string value describing device model + * @device_id: value of device_id + * @mains_online: boolean value indicating power supply online + * + * @bq2515x_init_data init_data: charger initialization data structure + */ +struct bq2515x_device { + struct power_supply *mains; + struct power_supply *battery; + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + struct mutex lock; + enum bq2515x_id id; + + struct gpio_desc *reset_gpio; + struct gpio_desc *lp_gpio; + struct gpio_desc *ac_detect_gpio; + struct gpio_desc *ce_gpio; + + char model_name[I2C_NAME_SIZE]; + int device_id; + bool mains_online; + + struct bq2515x_init_data init_data; +}; + +static struct reg_default bq25150_reg_defs[] = { + {BQ2515X_FLAG0, 0x0}, + {BQ2515X_FLAG1, 0x0}, + {BQ2515X_FLAG2, 0x0}, + {BQ2515X_FLAG3, 0x0}, + {BQ2515X_MASK0, 0x0}, + {BQ2515X_MASK1, 0x0}, + {BQ2515X_MASK2, 0x71}, + {BQ2515X_MASK3, 0x0}, + {BQ2515X_VBAT_CTRL, 0x3C}, + {BQ2515X_ICHG_CTRL, 0x8}, + {BQ2515X_PCHRGCTRL, 0x2}, + {BQ2515X_TERMCTRL, 0x14}, + {BQ2515X_BUVLO, 0x0}, + {BQ2515X_CHARGERCTRL0, 0x82}, + {BQ2515X_CHARGERCTRL1, 0x42}, + {BQ2515X_ILIMCTRL, 0x1}, + {BQ2515X_LDOCTRL, 0xB0}, + {BQ2515X_MRCTRL, 0x2A}, + {BQ2515X_ICCTRL0, 0x10}, + {BQ2515X_ICCTRL1, 0x0}, + {BQ2515X_ICCTRL2, 0x0}, + {BQ2515X_ADCCTRL0, 0x2}, + {BQ2515X_ADCCTRL1, 0x40}, + {BQ2515X_ADC_COMP1_M, 0x23}, + {BQ2515X_ADC_COMP1_L, 0x20}, + {BQ2515X_ADC_COMP2_M, 0x38}, + {BQ2515X_ADC_COMP2_L, 0x90}, + {BQ2515X_ADC_COMP3_M, 0x0}, + {BQ2515X_ADC_COMP3_L, 0x0}, + {BQ2515X_ADC_READ_EN, 0x0}, + {BQ2515X_TS_FASTCHGCTRL, 0x34}, + {BQ2515X_TS_COLD, 0x7C}, + {BQ2515X_TS_COOL, 0x6D}, + {BQ2515X_TS_WARM, 0x38}, + {BQ2515X_TS_HOT, 0x27}, + {BQ2515X_DEVICE_ID, 0x20}, +}; + +static struct reg_default bq25155_reg_defs[] = { + {BQ2515X_FLAG0, 0x0}, + {BQ2515X_FLAG1, 0x0}, + {BQ2515X_FLAG2, 0x0}, + {BQ2515X_FLAG3, 0x0}, + {BQ2515X_MASK0, 0x0}, + {BQ2515X_MASK1, 0x0}, + {BQ2515X_MASK2, 0x71}, + {BQ2515X_MASK3, 0x0}, + {BQ2515X_VBAT_CTRL, 0x3C}, + {BQ2515X_ICHG_CTRL, 0x8}, + {BQ2515X_PCHRGCTRL, 0x2}, + {BQ2515X_TERMCTRL, 0x14}, + {BQ2515X_BUVLO, 0x0}, + {BQ2515X_CHARGERCTRL0, 0x82}, + {BQ2515X_CHARGERCTRL1, 0xC2}, + {BQ2515X_ILIMCTRL, 0x6}, + {BQ2515X_LDOCTRL, 0xB0}, + {BQ2515X_MRCTRL, 0x2A}, + {BQ2515X_ICCTRL0, 0x10}, + {BQ2515X_ICCTRL1, 0x0}, + {BQ2515X_ICCTRL2, 0x40}, + {BQ2515X_ADCCTRL0, 0x2}, + {BQ2515X_ADCCTRL1, 0x40}, + {BQ2515X_ADC_COMP1_M, 0x23}, + {BQ2515X_ADC_COMP1_L, 0x20}, + {BQ2515X_ADC_COMP2_M, 0x38}, + {BQ2515X_ADC_COMP2_L, 0x90}, + {BQ2515X_ADC_COMP3_M, 0x0}, + {BQ2515X_ADC_COMP3_L, 0x0}, + {BQ2515X_ADC_READ_EN, 0x0}, + {BQ2515X_TS_FASTCHGCTRL, 0x34}, + {BQ2515X_TS_COLD, 0x7C}, + {BQ2515X_TS_COOL, 0x6D}, + {BQ2515X_TS_WARM, 0x38}, + {BQ2515X_TS_HOT, 0x27}, + {BQ2515X_DEVICE_ID, 0x35}, +}; + +static bool bq2515x_is_ps_online(struct bq2515x_device *bq2515x) +{ + return bq2515x->mains_online; +} + +static int bq2515x_wake_up(struct bq2515x_device *bq2515x) +{ + int ret; + int val; + + /* Read the STAT register if we can read it then the device is out + * of ship mode. If the register cannot be read then attempt to wake + * it up and enable the ADC. + */ + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val); + if (!ret) + return ret; + + /* Need to toggle LP and bring device out of ship mode. The device + * will exit the ship mode when the MR pin is held low for at least + * t_WAKE2 as shown in section 8.3.7.1 of the datasheet. + */ + if (bq2515x->lp_gpio) + gpiod_set_value_cansleep(bq2515x->lp_gpio, 0); + + if (bq2515x->lp_gpio) { + gpiod_set_value_cansleep(bq2515x->reset_gpio, 0); + usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US); + gpiod_set_value_cansleep(bq2515x->reset_gpio, 1); + } + + return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN, BIT(3)); +} + +static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x) +{ + bool dc = false; + unsigned int val; + int ret; + + if (bq2515x->ac_detect_gpio) + val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio); + + else { + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val); + if (ret < 0) + return ret; + } + + dc = val & BQ2515X_VIN_GOOD; + + ret = bq2515x->mains_online != dc; + + bq2515x->mains_online = dc; + + return ret; +} + +static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x) +{ + int ret; + + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0, + BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE); + if (ret < 0) + return ret; + + return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2, + BQ2515X_HWRESET_14S_WD, 0); +} + +static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x) +{ + int ret; + int vbat_msb; + int vbat_lsb; + uint32_t vbat_measurement; + + if (!bq2515x_is_ps_online(bq2515x)) + bq2515x_wake_up(bq2515x); + + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb); + if (ret) + return ret; + + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb); + if (ret) + return ret; + + vbat_measurement = (vbat_msb << 8) | vbat_lsb; + + return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) * 6; +} + +static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x) +{ + int ret; + int ichg_msb; + int ichg_lsb; + uint32_t ichg_measurement; + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; + unsigned int ichg_reg_code, reg_code; + unsigned int icharge_range = 0, pchrgctrl; + unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV; + + if (!bq2515x_is_ps_online(bq2515x)) + return -ENODATA; + + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb); + if (ret < 0) + return ret; + + ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb); + if (ret < 0) + return ret; + + ichg_measurement = (ichg_msb << 8) | ichg_lsb; + + ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo); + if (ret < 0) + return ret; + + vlowv_sel = buvlo & BQ2515X_VLOWV_SEL; + + if (vlowv_sel) + vlowv = BQ2515X_VLOWV_SEL_1B1_UV; + + if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) { + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, + &pchrgctrl); + if (ret < 0) + return ret; + reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK; + } else { + ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, + &ichg_reg_code); + if (ret < 0) + return ret; + reg_code = ichg_reg_code; + } + + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); + if (ret < 0) + return ret; + + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; + + if (icharge_range) + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; + + return reg_code * (ichg_multiplier * ichg_measurement + / BQ2515X_ICHG_DIVISOR); +} + +static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x) +{ + int ret; + int ce_pin = 0; + int icctrl2; + int charger_disable; + + if (bq2515x->ce_gpio) + ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio); + + ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2); + if (ret < 0) + return ret; + + charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE; + + if (charger_disable || ce_pin) + return true; + + return false; +} + +static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val) +{ + if (bq2515x->ce_gpio) + gpiod_set_value_cansleep(bq2515x->ce_gpio, val); + + return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2, + BQ2515X_CHARGER_DISABLE, val); +} + +static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x) +{ + int ret; + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; + unsigned int ichg_reg_code; + unsigned int pchrgctrl; + unsigned int icharge_range; + + ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code); + if (ret < 0) + return ret; + + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); + if (ret < 0) + return ret; + + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; + + if (icharge_range) + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; + + return ichg_reg_code * ichg_multiplier; +} + +static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x, + int val) +{ + int ret; + unsigned int ichg_reg_code; + u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA; + unsigned int icharge_range = 0; + + if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA) + return -EINVAL; + + if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) { + ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA; + icharge_range = BQ2515X_ICHARGE_RANGE; + } + + bq2515x_set_charge_disable(bq2515x, 1); + + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL, + BQ2515X_ICHARGE_RANGE, icharge_range); + if (ret < 0) + return ret; + + ichg_reg_code = val / ichg_multiplier; + + ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code); + if (ret < 0) + return ret; + + return bq2515x_set_charge_disable(bq2515x, 0); +} + +static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x) +{ + int ret; + unsigned int pchrgctrl; + unsigned int icharge_range; + u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; + unsigned int precharge_reg_code; + + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); + if (ret < 0) + return ret; + + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; + + if (icharge_range) + precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA; + + precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK; + + return precharge_reg_code * precharge_multiplier; +} + +static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x, + int val) +{ + int ret; + unsigned int pchrgctrl; + unsigned int icharge_range; + unsigned int precharge_reg_code; + u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA; + u16 precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA; + + ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl); + if (ret < 0) + return ret; + + icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE; + + if (icharge_range) { + precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA; + precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA; + } + if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA) + return -EINVAL; + + precharge_reg_code = val / precharge_multiplier; + + ret = bq2515x_set_charge_disable(bq2515x, 1); + if (ret < 0) + return ret; + + ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL, + BQ2515X_PRECHARGE_MASK, precharge_reg_code); + if (ret < 0) + return ret; + + return bq2515x_set_charge_disable(bq2515x, 0); +} + +static int bq2515x_charging_status(struct bq2515x_device *bq2515x, + union power_supply_propval *val) +{ + bool status0_no_fault; + bool status1_no_fault; + bool ce_status; + bool charge_done; + unsigned int status; + int ret; + + if (!bq2515x_is_ps_online(bq2515x)) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + return 0; + } + + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status); + if (ret) + return ret; + + /** + * The code block below is used to determine if any faults from the + * STAT0 register are disbaling charging or if the charge has completed + * according to the CHARGE_DONE_STAT bit. + */ + if (((status & BQ2515X_STAT0_MASK) == true) & + ((status & BQ2515X_CHRG_DONE) == false)) { + status0_no_fault = true; + charge_done = false; + } else if (status & BQ2515X_CHRG_DONE) { + charge_done = true; + status0_no_fault = false; + } else { + status0_no_fault = false; + charge_done = false; + } + + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status); + if (ret) + return ret; + /** + *The code block below is used to determine if any faults from the + * STAT1 register are disbaling charging + */ + if ((status & BQ2515X_STAT1_MASK) == false) + status1_no_fault = true; + else + status1_no_fault = false; + + ce_status = (!bq2515x_get_charge_disable(bq2515x)); + + /** + *If there are no faults and charging is enabled, then status is + *charging. Otherwise, if charging is complete, then status is full. + *Otherwise, if a fault exists or charging is disbaled, then status is + *not charging + */ + if (status0_no_fault & status1_no_fault & ce_status) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (charge_done) + val->intval = POWER_SUPPLY_STATUS_FULL; + else if (!(status0_no_fault & status1_no_fault & ce_status)) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + + return ret; +} + +static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x) +{ + int vbat_reg_code; + int ret; + + ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code); + if (ret) + return ret; + + return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV; +} + +static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val) +{ + int vbat_reg_code; + + if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN) + return -EINVAL; + + vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV; + + return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code); +} + +static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x) +{ + int ret; + int ilimctrl; + + ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl); + if (ret) + return ret; + + return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK]; +} + +static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bq2515x_ilim_lvl_values); i++) { + if (val == bq2515x_ilim_lvl_values[i]) + break; + + if (val > bq2515x_ilim_lvl_values[i - 1] && + val < bq2515x_ilim_lvl_values[i]) { + if (val - bq2515x_ilim_lvl_values[i - 1] < + bq2515x_ilim_lvl_values[i] - val) { + i = i - 1; + break; + } + } + } + + return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i); +} + +static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy, + enum power_supply_property prop) +{ + switch (prop) { + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: + return true; + default: + return false; + } +} + +static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x, + union power_supply_propval *val) +{ + int health = POWER_SUPPLY_HEALTH_GOOD; + int ret; + unsigned int stat1; + unsigned int flag3; + + if (!bq2515x_is_ps_online(bq2515x)) + bq2515x_wake_up(bq2515x); + + ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3); + if (ret) + return ret; + + if (flag3 & BQ2515X_SAFETY_TIMER_EXP) { + health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE; + goto ret_health; + } + + if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT) { + health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + goto ret_health; + } + + ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1); + if (ret) + return ret; + + if (stat1 & BQ2515X_HEALTH_MASK) { + switch (stat1 & BQ2515X_HEALTH_MASK) { + case BQ2515X_TS_HOT_STAT: + health = POWER_SUPPLY_HEALTH_HOT; + break; + case BQ2515X_TS_WARM_STAT: + health = POWER_SUPPLY_HEALTH_WARM; + break; + case BQ2515X_TS_COOL_STAT: + health = POWER_SUPPLY_HEALTH_COOL; + break; + case BQ2515X_TS_COLD_STAT: + health = POWER_SUPPLY_HEALTH_COLD; + break; + default: + health = POWER_SUPPLY_HEALTH_UNKNOWN; + break; + } + } + + goto ret_health; + +ret_health: + val->intval = health; + return 0; +} + +static int bq2515x_mains_set_property(struct power_supply *psy, + enum power_supply_property prop, + const union power_supply_propval *val) +{ + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); + int ret; + + switch (prop) { + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = bq2515x_set_ilim_lvl(bq2515x, val->intval); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = bq2515x_set_batt_reg(bq2515x, val->intval); + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = bq2515x_set_const_charge_current(bq2515x, val->intval); + break; + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: + ret = bq2515x_set_precharge_current(bq2515x, val->intval); + break; + default: + return -EINVAL; + } + + return ret; +} + +static int bq2515x_mains_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); + int ret = 0; + + switch (prop) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = bq2515x->mains_online; + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: + ret = bq2515x_get_const_charge_current(bq2515x); + if (ret < 0) + return ret; + + val->intval = ret; + break; + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: + ret = bq2515x_get_precharge_current(bq2515x); + if (ret < 0) + return ret; + + val->intval = ret; + break; + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: + ret = bq2515x_get_ilim_lvl(bq2515x); + if (ret < 0) + return ret; + + val->intval = ret; + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: + ret = bq2515x_get_batt_reg(bq2515x); + if (ret < 0) + return ret; + + val->intval = ret; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = bq2515x->model_name; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = BQ2515X_MANUFACTURER; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + val->intval = BQ2515X_VBAT_REG_MAX; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + val->intval = BQ2515X_VBAT_REG_MIN; + break; + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + val->intval = BQ2515X_ICHG_MAX_UA; + break; + default: + return -EINVAL; + } + + return ret; +} + +static int bq2515x_battery_get_property(struct power_supply *psy, + enum power_supply_property prop, + union power_supply_propval *val) +{ + struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy); + int ret; + + ret = bq2515x_update_ps_status(bq2515x); + if (ret < 0) + return ret; + + switch (prop) { + + case POWER_SUPPLY_PROP_STATUS: + if (!bq2515x_is_ps_online(bq2515x)) { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + } + + ret = bq2515x_charging_status(bq2515x, val); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = bq2515x_get_battery_voltage_now(bq2515x); + if (ret < 0) + return ret; + + val->intval = ret; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = bq2515x_get_battery_current_now(bq2515x); + if (ret < 0) + return ret; + + val->intval = ret; + break; + case POWER_SUPPLY_PROP_HEALTH: + ret = bq2515x_charger_get_health(bq2515x, val); + if (ret) + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; + break; + default: + return -EINVAL; + } + return 0; +} + +static enum power_supply_property bq2515x_battery_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static enum power_supply_property bq2515x_charger_properties[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, + POWER_SUPPLY_PROP_PRECHARGE_CURRENT, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + +static struct power_supply_desc bq2515x_mains_desc = { + .name = "bq2515x-mains", + .type = POWER_SUPPLY_TYPE_MAINS, + .get_property = bq2515x_mains_get_property, + .set_property = bq2515x_mains_set_property, + .properties = bq2515x_charger_properties, + .num_properties = ARRAY_SIZE(bq2515x_charger_properties), + .property_is_writeable = bq2515x_power_supply_property_is_writeable, + +}; + +static struct power_supply_desc bq2515x_battery_desc = { + .name = "bq2515x-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .get_property = bq2515x_battery_get_property, + .properties = bq2515x_battery_properties, + .num_properties = ARRAY_SIZE(bq2515x_battery_properties), +}; + +static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x) +{ + struct power_supply_config psy_cfg = { .drv_data = bq2515x, }; + + bq2515x->mains = devm_power_supply_register(bq2515x->dev, + &bq2515x_mains_desc, + &psy_cfg); + if (IS_ERR(bq2515x->mains)) + return -EINVAL; + + bq2515x->battery = devm_power_supply_register(bq2515x->dev, + &bq2515x_battery_desc, + &psy_cfg); + if (IS_ERR(bq2515x->battery)) + return -EINVAL; + + return 0; +} + +static int bq2515x_hw_init(struct bq2515x_device *bq2515x) +{ + int ret = 0; + + if (bq2515x->init_data.ichg) + ret = bq2515x_set_const_charge_current(bq2515x, + bq2515x->init_data.ichg); + + if (ret) + goto err_out; + + if (bq2515x->init_data.ilim) + ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim); + + if (ret) + goto err_out; + + if (bq2515x->init_data.vreg) + ret = bq2515x_set_batt_reg(bq2515x, bq2515x->init_data.vreg); + + if (ret) + goto err_out; + + ret = bq2515x_disable_watchdog_timers(bq2515x); + + if (ret) + goto err_out; + +err_out: + return ret; +} + +static int bq2515x_read_properties(struct bq2515x_device *bq2515x) +{ + int ret; + + ret = device_property_read_u32(bq2515x->dev, + "constant-charge-current-max-microamp", + &bq2515x->init_data.ichg); + if (ret) + bq2515x->init_data.ichg = BQ2515X_DEFAULT_ICHG_UA; + + ret = device_property_read_u32(bq2515x->dev, + "precharge-current-max-microamp", + &bq2515x->init_data.iprecharge); + if (ret) + bq2515x->init_data.iprecharge = BQ2515X_DEFAULT_IPRECHARGE_UA; + + ret = device_property_read_u32(bq2515x->dev, + "input-current-limit-microamp", + &bq2515x->init_data.ilim); + if (ret) + switch (bq2515x->device_id) { + case BQ25150: + bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA; + break; + case BQ25155: + bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA; + break; + } + + ret = device_property_read_u32(bq2515x->dev, + "constant-charge-voltage-max-microvolt", + &bq2515x->init_data.vreg); + if (ret) + bq2515x->init_data.vreg = BQ2515X_DEFAULT_VBAT_REG_UV; + + bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev, + "ac_detect", GPIOD_IN); + if (IS_ERR(bq2515x->ac_detect_gpio)) + dev_info(bq2515x->dev, "ac_detect GPIO not defined"); + + bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev, + "reset", GPIOD_OUT_LOW); + if (IS_ERR(bq2515x->reset_gpio)) { + if (PTR_ERR(bq2515x->reset_gpio) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + + bq2515x->lp_gpio = devm_gpiod_get_optional(bq2515x->dev, "low-power", + GPIOD_OUT_LOW); + if (IS_ERR(bq2515x->lp_gpio)) { + if (PTR_ERR(bq2515x->lp_gpio) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + + bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev, + "charge-enable", + GPIOD_OUT_LOW); + if (IS_ERR(bq2515x->ce_gpio)) { + if (PTR_ERR(bq2515x->ce_gpio) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } + + return 0; +} + +static bool bq2515x_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case BQ2515X_STAT0 ... BQ2515X_FLAG3: + case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L: + return true; + default: + return false; + } +} + +static const struct regmap_config bq25150_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BQ2515X_DEVICE_ID, + .reg_defaults = bq25150_reg_defs, + .num_reg_defaults = ARRAY_SIZE(bq25150_reg_defs), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = bq2515x_volatile_register, +}; + +static const struct regmap_config bq25155_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = BQ2515X_DEVICE_ID, + .reg_defaults = bq25155_reg_defs, + .num_reg_defaults = ARRAY_SIZE(bq25155_reg_defs), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = bq2515x_volatile_register, +}; + +static int bq2515x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct bq2515x_device *bq; + int ret; + + bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL); + if (!bq) + return -ENOMEM; + + bq->client = client; + bq->dev = dev; + + mutex_init(&bq->lock); + + strncpy(bq->model_name, id->name, I2C_NAME_SIZE); + + bq->device_id = (enum bq2515x_id)of_device_get_match_data(&client->dev); + + switch (bq->device_id) { + case BQ25150: + bq->regmap = devm_regmap_init_i2c(client, +&bq25150_regmap_config); + break; + case BQ25155: + bq->regmap = devm_regmap_init_i2c(client, +&bq25155_regmap_config); + break; + } + + if (IS_ERR(bq->regmap)) { + dev_err(dev, "failed to allocate register map\n"); + return PTR_ERR(bq->regmap); + } + + i2c_set_clientdata(client, bq); + + ret = bq2515x_read_properties(bq); + if (ret) { + dev_err(dev, "Failed to read device tree properties %d\n", + ret); + goto err_out; + } + + ret = bq2515x_hw_init(bq); + if (ret) { + dev_err(dev, "Cannot initialize the chip.\n"); + goto err_out; + } + + return bq2515x_power_supply_register(bq); + +err_out: + mutex_destroy(&bq->lock); + return ret; +} + +static const struct i2c_device_id bq2515x_i2c_ids[] = { + { "bq25150", BQ25150, }, + { "bq25155", BQ25155, }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids); + +static const struct of_device_id bq2515x_of_match[] = { + { .compatible = "ti,bq25150", }, + { .compatible = "ti,bq25155", }, + { }, +}; +MODULE_DEVICE_TABLE(of, bq2515x_of_match); + +static struct i2c_driver bq2515x_driver = { + .driver = { + .name = "bq2515x-charger", + .of_match_table = bq2515x_of_match, + }, + .probe = bq2515x_probe, + .id_table = bq2515x_i2c_ids, +}; +module_i2c_driver(bq2515x_driver); + +MODULE_AUTHOR("Dan Murphy "); +MODULE_AUTHOR("Ricardo Rivera-Matos "); +MODULE_DESCRIPTION("BQ2515X charger driver"); +MODULE_LICENSE("GPL v2");