From patchwork Fri May 29 18:25:43 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 11579497 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9CD51739 for ; Fri, 29 May 2020 18:26:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 89C2F207BC for ; Fri, 29 May 2020 18:26:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726999AbgE2S0H (ORCPT ); Fri, 29 May 2020 14:26:07 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:50484 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725839AbgE2S0H (ORCPT ); Fri, 29 May 2020 14:26:07 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id 0C9C28030772; Fri, 29 May 2020 18:26:03 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id HTBV-D7sdvH6; Fri, 29 May 2020 21:26:01 +0300 (MSK) From: Serge Semin To: Mark Brown , Rob Herring CC: Serge Semin , Serge Semin , Rob Herring , Georgy Vlasov , Ramil Zaripov , Alexey Malahov , Thomas Bogendoerfer , Feng Tang , Andy Shevchenko , Arnd Bergmann , , , , Subject: [PATCH v7] dt-bindings: spi: Convert DW SPI binding to DT schema Date: Fri, 29 May 2020 21:25:43 +0300 Message-ID: <20200529182544.9807-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Sender: linux-mips-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mips@vger.kernel.org Modern device tree bindings are supposed to be created as YAML-files in accordance with dt-schema. This commit replaces two DW SPI legacy bare text bindings with YAML file. As before the bindings file states that the corresponding dts node is supposed to be compatible either with generic DW APB SSI controller or with Microsemi/Amazon/Renesas/Intel vendors-specific controllers, to have registers, interrupts and clocks properties. Though in case of Microsemi version of the controller there must be two registers resources specified. Properties like clock-names, reg-io-width, cs-gpio, num-cs, DMA and slave device sub-nodes are optional. Signed-off-by: Serge Semin Reviewed-by: Rob Herring Cc: Georgy Vlasov Cc: Ramil Zaripov Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Feng Tang Cc: Andy Shevchenko Cc: Arnd Bergmann Cc: linux-mips@vger.kernel.org --- Changelog v7: - Rebase on top of the spi/for-next branch. - Add resets and reset-names properties, since Dinh Nguyen has slipped the patchset optional reset-support in right in front of my nose. --- .../bindings/spi/snps,dw-apb-ssi.txt | 49 ------- .../bindings/spi/snps,dw-apb-ssi.yaml | 133 ++++++++++++++++++ .../devicetree/bindings/spi/spi-dw.txt | 24 ---- 3 files changed, 133 insertions(+), 73 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt create mode 100644 Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-dw.txt diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt deleted file mode 100644 index 0f21407a7ea3..000000000000 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ /dev/null @@ -1,49 +0,0 @@ -Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface. - -Required properties: -- compatible : "snps,dw-apb-ssi" or "mscc,-spi", where soc is "ocelot" or - "jaguar2", or "amazon,alpine-dw-apb-ssi", or "snps,dwc-ssi-1.01a" or - "intel,keembay-ssi" -- reg : The register base for the controller. For "mscc,-spi", a second - register set is required (named ICPU_CFG:SPI_MST) -- interrupts : One interrupt, used by the controller. -- #address-cells : <1>, as required by generic SPI binding. -- #size-cells : <0>, also as required by generic SPI binding. -- clocks : phandles for the clocks, see the description of clock-names below. - The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock - is optional. If a single clock is specified but no clock-name, it is the - "ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first. - -Optional properties: -- clock-names : Contains the names of the clocks: - "ssi_clk", for the core clock used to generate the external SPI clock. - "pclk", the interface clock, required for register access. If a clock domain - used to enable this clock then it should be named "pclk_clkdomain". -- cs-gpios : Specifies the gpio pins to be used for chipselects. -- num-cs : The number of chipselects. If omitted, this will default to 4. -- reg-io-width : The I/O register width (in bytes) implemented by this - device. Supported values are 2 or 4 (the default). -- dmas : Phandle + identifiers of Tx and Rx DMA channels. -- dma-names : Contains the names of the DMA channels. Must be "tx" and "rx". -- resets : contains an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : must contain "spi" - -Child nodes as per the generic SPI binding. - -Example: - - spi@fff00000 { - compatible = "snps,dw-apb-ssi"; - reg = <0xfff00000 0x1000>; - interrupts = <0 154 4>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&spi_m_clk>; - num-cs = <2>; - cs-gpios = <&gpio0 13 0>, - <&gpio0 14 0>; - resets = <&rst SPIM0_RST>; - reset-names = "spi"; - }; - diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml new file mode 100644 index 000000000000..c62cbe79f00d --- /dev/null +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface + +maintainers: + - Mark Brown + +allOf: + - $ref: "spi-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - mscc,ocelot-spi + - mscc,jaguar2-spi + then: + properties: + reg: + minItems: 2 + +properties: + compatible: + oneOf: + - description: Generic DW SPI Controller + enum: + - snps,dw-apb-ssi + - snps,dwc-ssi-1.01a + - description: Microsemi Ocelot/Jaguar2 SoC SPI Controller + items: + - enum: + - mscc,ocelot-spi + - mscc,jaguar2-spi + - const: snps,dw-apb-ssi + - description: Amazon Alpine SPI Controller + const: amazon,alpine-dw-apb-ssi + - description: Renesas RZ/N1 SPI Controller + items: + - const: renesas,rzn1-spi + - const: snps,dw-apb-ssi + - description: Intel Keem Bay SPI Controller + const: intel,keembay-ssi + + reg: + minItems: 1 + items: + - description: DW APB SSI controller memory mapped registers + - description: SPI MST region map + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: SPI Controller reference clock source + - description: APB interface clock source + + clock-names: + minItems: 1 + items: + - const: ssi_clk + - const: pclk + + resets: + maxItems: 1 + + reset-names: + const: spi + + reg-io-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: I/O register width (in bytes) implemented by this device + default: 4 + enum: [ 2, 4 ] + + num-cs: + default: 4 + minimum: 1 + maximum: 4 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + +patternProperties: + "^.*@[0-9a-f]+$": + type: object + properties: + reg: + minimum: 0 + maximum: 3 + + spi-rx-bus-width: + const: 1 + + spi-tx-bus-width: + const: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - interrupts + - clocks + +examples: + - | + spi@fff00000 { + compatible = "snps,dw-apb-ssi"; + reg = <0xfff00000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 154 4>; + clocks = <&spi_m_clk>; + num-cs = <2>; + cs-gpios = <&gpio0 13 0>, + <&gpio0 14 0>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-dw.txt b/Documentation/devicetree/bindings/spi/spi-dw.txt deleted file mode 100644 index 7b63ed601990..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-dw.txt +++ /dev/null @@ -1,24 +0,0 @@ -Synopsys DesignWare SPI master - -Required properties: -- compatible: should be "snps,designware-spi" -- #address-cells: see spi-bus.txt -- #size-cells: see spi-bus.txt -- reg: address and length of the spi master registers -- interrupts: should contain one interrupt -- clocks: spi clock phandle -- num-cs: see spi-bus.txt - -Optional properties: -- cs-gpios: see spi-bus.txt - -Example: - -spi: spi@4020a000 { - compatible = "snps,designware-spi"; - interrupts = <11 1>; - reg = <0x4020a000 0x1000>; - clocks = <&pclk>; - num-cs = <2>; - cs-gpios = <&banka 0 0>; -};