From patchwork Fri Jun 12 14:47:10 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Kieran Bingham X-Patchwork-Id: 11601749 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id ACC181392 for ; Fri, 12 Jun 2020 14:47:51 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 8951B20888 for ; Fri, 12 Jun 2020 14:47:51 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="UyWTZEqh" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726513AbgFLOrW (ORCPT ); Fri, 12 Jun 2020 10:47:22 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58688 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726455AbgFLOrV (ORCPT ); Fri, 12 Jun 2020 10:47:21 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3642BC03E96F; Fri, 12 Jun 2020 07:47:21 -0700 (PDT) Received: from Q.local (cpc89242-aztw30-2-0-cust488.18-1.cable.virginm.net [86.31.129.233]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id A8AF82C2; Fri, 12 Jun 2020 16:47:18 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1591973239; bh=zG5q8wP2mfuUfE3Cb1aWpp0x99T6/VB9E5oBYr5LdzA=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=UyWTZEqhGniRoN8Z5E7jg60igEqq9qoJHaKOvOJm0rtGhskCI5wvILfdU/60aXgc0 uEOTI/48Z/wyyRK9SviAnH3HD4fLS4OdCfOTt/0urCS8gR4Fz6Xucwax76otKzD/Z0 w3SUwf86O0i6DzQPRZRDS3AOUAuP9k17t5LrXrSk= From: Kieran Bingham To: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Mauro Carvalho Chehab , sakari.ailus@iki.fi Cc: Kieran Bingham , Laurent Pinchart , Jacopo Mondi , =?utf-8?q?Niklas_S=C3=B6derlund?= , Hans Verkuil , Hyun Kwon , Manivannan Sadhasivam , Rob Herring , Linus Walleij , Laurent Pinchart , Jacopo Mondi , Kieran Bingham , =?utf-8?q?Niklas_?= =?utf-8?q?S=C3=B6derlund?= , Rob Herring Subject: [PATCH v10 1/4] dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286 Date: Fri, 12 Jun 2020 15:47:10 +0100 Message-Id: <20200612144713.502006-2-kieran.bingham+renesas@ideasonboard.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200612144713.502006-1-kieran.bingham+renesas@ideasonboard.com> References: <20200612144713.502006-1-kieran.bingham+renesas@ideasonboard.com> MIME-Version: 1.0 Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Laurent Pinchart The MAX9286 deserializes video data received on up to 4 Gigabit Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up to 4 data lanes. Signed-off-by: Laurent Pinchart Signed-off-by: Jacopo Mondi Signed-off-by: Kieran Bingham Reviewed-by: Niklas Söderlund Signed-off-by: Niklas Söderlund Reviewed-by: Rob Herring --- v7: - Collect Rob's RB tag - Remove redundant maxItems from remote-endpoints - Fix SPDX licence tag v10: [Jacopo] - Fix dt-validation - Fix dt-binding examples with 2 reg entries [Kieran] - Correctly match the hex camera node reg - Add (required) GPIO controller support .../bindings/media/i2c/maxim,max9286.yaml | 366 ++++++++++++++++++ 1 file changed, 366 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml new file mode 100644 index 000000000000..c632a10a753a --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -0,0 +1,366 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated Quad GMSL Deserializer + +maintainers: + - Jacopo Mondi + - Kieran Bingham + - Laurent Pinchart + - Niklas Söderlund + +description: | + The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia + Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data + lanes. + + In addition to video data, the GMSL links carry a bidirectional control + channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic + not addressed to itself to the other side of the links, where a GMSL + serializer will output it on a local I2C bus. In the other direction all I2C + traffic received over GMSL by the MAX9286 is output on the local I2C bus. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + const: maxim,max9286 + + reg: + description: I2C device address + maxItems: 1 + + poc-supply: + description: Regulator providing Power over Coax to the cameras + maxItems: 1 + + enable-gpios: + description: GPIO connected to the \#PWDN pin with inverted polarity + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + ports: + type: object + description: | + The connections to the MAX9286 GMSL and its endpoint nodes are modelled + using the OF graph bindings in accordance with the video interface + bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + The following table lists the port number corresponding to each device + port. + + Port Description + ---------------------------------------- + Port 0 GMSL Input 0 + Port 1 GMSL Input 1 + Port 2 GMSL Input 2 + Port 3 GMSL Input 3 + Port 4 CSI-2 Output + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@[0-3]: + type: object + properties: + reg: + enum: [ 0, 1, 2, 3 ] + + endpoint: + type: object + + properties: + remote-endpoint: + description: | + phandle to the remote GMSL source endpoint subnode in the + remote node port. + + required: + - remote-endpoint + + required: + - reg + - endpoint + + additionalProperties: false + + port@4: + type: object + properties: + reg: + const: 4 + + endpoint: + type: object + + properties: + remote-endpoint: + description: phandle to the remote CSI-2 sink endpoint. + + data-lanes: + description: array of physical CSI-2 data lane indexes. + + required: + - remote-endpoint + - data-lanes + + required: + - reg + - endpoint + + additionalProperties: false + + required: + - port@4 + + i2c-mux: + type: object + description: | + Each GMSL link is modelled as a child bus of an i2c bus + multiplexer/switch, in accordance with bindings described in + Documentation/devicetree/bindings/i2c/i2c-mux.txt. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^i2c@[0-3]$": + type: object + description: | + Child node of the i2c bus multiplexer which represents a GMSL link. + Each serializer device on the GMSL link remote end is represented with + an i2c-mux child node. The MAX9286 chip supports up to 4 GMSL + channels. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + description: The index of the GMSL channel. + maxItems: 1 + + patternProperties: + "^camera@[a-f0-9]+$": + type: object + description: | + The remote camera device, composed by a GMSL serializer and a + connected video source. + + properties: + compatible: + description: The remote device compatible string. + + reg: + minItems: 2 + maxItems: 3 + description: | + The I2C addresses to be assigned to the remote devices through + address reprogramming. The number of entries depends on the + requirements of the currently connected remote device. + + port: + type: object + + properties: + endpoint: + type: object + + properties: + remote-endpoint: + description: phandle to the MAX9286 sink endpoint. + + required: + - remote-endpoint + + additionalProperties: false + + required: + - endpoint + + additionalProperties: false + + required: + - compatible + - reg + - port + + additionalProperties: false + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - ports + - i2c-mux + - gpio-controller + +additionalProperties: false + +examples: + - | + #include + + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000 0 0x40>; + + gmsl-deserializer@2c { + compatible = "maxim,max9286"; + reg = <0x2c>; + poc-supply = <&camera_poc_12v>; + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + max9286_in0: endpoint { + remote-endpoint = <&rdacm20_out0>; + }; + }; + + port@1 { + reg = <1>; + + max9286_in1: endpoint { + remote-endpoint = <&rdacm20_out1>; + }; + }; + + port@2 { + reg = <2>; + + max9286_in2: endpoint { + remote-endpoint = <&rdacm20_out2>; + }; + }; + + port@3 { + reg = <3>; + + max9286_in3: endpoint { + remote-endpoint = <&rdacm20_out3>; + }; + }; + + port@4 { + reg = <4>; + + max9286_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + camera@51 { + compatible = "imi,rdacm20"; + reg = <0x51>, <0x61>; + + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + camera@52 { + compatible = "imi,rdacm20"; + reg = <0x52>, <0x62>; + + port { + rdacm20_out1: endpoint { + remote-endpoint = <&max9286_in1>; + }; + }; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + camera@53 { + compatible = "imi,rdacm20"; + reg = <0x53>, <0x63>; + + port { + rdacm20_out2: endpoint { + remote-endpoint = <&max9286_in2>; + }; + }; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + camera@54 { + compatible = "imi,rdacm20"; + reg = <0x54>, <0x64>; + + port { + rdacm20_out3: endpoint { + remote-endpoint = <&max9286_in3>; + }; + }; + }; + }; + }; + }; + }; From patchwork Fri Jun 12 14:47:11 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Kieran Bingham X-Patchwork-Id: 11601745 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A933813B1 for ; Fri, 12 Jun 2020 14:47:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 625C420835 for ; Fri, 12 Jun 2020 14:47:37 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="n8TTAm+P" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726621AbgFLOrf (ORCPT ); Fri, 12 Jun 2020 10:47:35 -0400 Received: from perceval.ideasonboard.com ([213.167.242.64]:54944 "EHLO perceval.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726479AbgFLOr1 (ORCPT ); Fri, 12 Jun 2020 10:47:27 -0400 Received: from Q.local (cpc89242-aztw30-2-0-cust488.18-1.cable.virginm.net [86.31.129.233]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 320E5730; Fri, 12 Jun 2020 16:47:20 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1591973241; bh=N9D3GuEHZNBS0QobGTORXcmWM4RAuMUZmzzioZu7X0o=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=n8TTAm+P/y3ensXUIx41o42SDZJ6dAEImU3hQ95kdZRW6+t9rL8uCvsb37dkEIo2i ZgrdcbYDGPfKphal/MRji+IGeIMG9AX2jurkTGFBMGBI9xFgZWnoezJX5XY6xwyD9j jzNFZRWAnUGhsY9x2QPGplCyEipulvCERL9OuwaU= From: Kieran Bingham To: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Mauro Carvalho Chehab , sakari.ailus@iki.fi Cc: Kieran Bingham , Laurent Pinchart , Jacopo Mondi , =?utf-8?q?Niklas_S=C3=B6derlund?= , Hans Verkuil , Hyun Kwon , Manivannan Sadhasivam , Rob Herring , Linus Walleij , Kieran Bingham , Jacopo Mondi , Laurent Pinchart , =?utf-8?q?Nik?= =?utf-8?q?las_S=C3=B6derlund?= Subject: [PATCH v10 2/4] media: i2c: Add MAX9286 driver Date: Fri, 12 Jun 2020 15:47:11 +0100 Message-Id: <20200612144713.502006-3-kieran.bingham+renesas@ideasonboard.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200612144713.502006-1-kieran.bingham+renesas@ideasonboard.com> References: <20200612144713.502006-1-kieran.bingham+renesas@ideasonboard.com> MIME-Version: 1.0 Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The MAX9286 is a 4-channel GMSL deserializer with coax or STP input and CSI-2 output. The device supports multicamera streaming applications, and features the ability to synchronise the attached cameras. CSI-2 output can be configured with 1 to 4 lanes, and a control channel is supported over I2C, which implements an I2C mux to facilitate communications with connected cameras across the reverse control channel. Signed-off-by: Jacopo Mondi Signed-off-by: Kieran Bingham Signed-off-by: Laurent Pinchart Signed-off-by: Niklas Söderlund Reviewed-by: Manivannan Sadhasivam --- v2: - Fix MAINTAINERS entry This posting is released with the following modifications to work without Sakari's VC developments: - max9286_g_mbus_config() re-instated - max9286_get_frame_desc() is not bus/csi aware - max9286_{get,set}_routing() removed v3: - Initialise notifier with v4l2_async_notifier_init - Update for new mbus csi2 format V4L2_MBUS_CSI2_DPHY v4: - Re-introduce required code to function with the VC series. - Implement max9286_get_routing, max9286_set_routing - Remove max9286_g_mbus_config v5: (internal release) - Fix printk formatting for hex value - max9286->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE (add |) - MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER -> MEDIA_ENT_F_VID_IF_BRIDGE - Remove 'device is bound' workaround v6: - v4l2_subdev_krouting instead of v4l2_subdev_routing separated to allow integration without the VC/V4L2-Mux series. - convert sd_to_max9286 to inline function - rename max9286_device to max9286_priv - Cleanup the v4l2_async_notifier - Extend MODULE_AUTHOR - Replace of_graph_get_endpoint_by_regs with fwnode_graph_get_endpoint_by_id - Pass default bus type when parsing fwnode endpoint (Manivannan Sadhasivam) - Use new YAML file reference in MAINTAINERS - Parse new i2c-mux node in max9286_get_i2c_by_id (This could/should be refactored to parse these separately first) - Spelling and calculation fixes in the FSYNC_LOCKED check comments - Identify each enabled i2c-mux channel in a single pass - max9286: Improve mux-state readbility [v2] - Fix frame sync lock durations - Add comment to describe /why/ we must open the mux in s_stream - use -EXDEV as return code for failed link synchronisation. - Fix reference counting of the dt nodeS - Convert to probe_new for I2C - Remove redundant max9286_i2c_mux_state - Provide optional enable-gpio (max9286-pwdn) v7: [Kieran] - Ensure powerdown lines are optional - Add a 4ms power-up delay - Add max9286_check_config_link() to core - Add GPIO chip controller for GPIO0OUT and GPIO1OUT - Fix GPIO registration - max9286: Split out async registration (fixes regulator -EPROBE_DEFERs failures) - Collect all V4L2 registrations - balance v4l2_async refcnting - Rename max9286_v4l2_async_ => max9286_v4l2_notifier_ [Jacopo] - Remove redundanct MAXIM_I2C_SPEED macros - Move notifiers operations - Add delay after reverse channel reconfiguration - Move link setup to completion - Fix up max9286_check_config_link() implementation - Remove redundant dual configuration of reverse channel v8: [Kieran] - Update the bound_sources mask on unbind - Convert probe kzalloc usage to devm_ variant - Fix up cleanup path from GPIO PowerDown registration - cleanup GPIO device registration fail path - Convert to use devm_regulator_get() - Fit max9286_parse_dt print on one line - Move multi-device workarounds out of upstream driver - Remove I2C mod-table - Lock format changes - Describe pad index usage - Remove poc_enabled workaround - Rename the max9286_gpio to be more explicit on it's actions. - Move max9286_init_format call - Rework probe sequence and simplify error paths. - Simplify i2c comments - Implement Pixelrate control - Disable overlap window [Jacopo] - Adapt Kconfig to latest upstream changes - Put of node on error - Calculate pixel rate - Simplify overlap window disablement v9: [Kieran] - Kconfig: Depend on OF - Re-sort addition to Makefile v10: [Kieran] - Use the same default mbus_fmt everywhere - Don't provide GPIO names - Fix dev->of_node refcnting - Fix whitespace indent - Use single sample per pixel - Remove redundant DPHY check - Remove redundant v4l2_fwnode_endpoint_free call - Validate link formats --- MAINTAINERS | 10 + drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/max9286.c | 1320 +++++++++++++++++++++++++++++++++++ 4 files changed, 1344 insertions(+) create mode 100644 drivers/media/i2c/max9286.c diff --git a/MAINTAINERS b/MAINTAINERS index 791d2a862e41..7534df72033f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10274,6 +10274,16 @@ F: Documentation/hwmon/max6697.rst F: drivers/hwmon/max6697.c F: include/linux/platform_data/max6697.h +MAX9286 QUAD GMSL DESERIALIZER DRIVER +M: Jacopo Mondi +M: Kieran Bingham +M: Laurent Pinchart +M: Niklas Söderlund +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml +F: drivers/media/i2c/max9286.c + MAX9860 MONO AUDIO VOICE CODEC DRIVER M: Peter Rosin L: alsa-devel@alsa-project.org (moderated for non-subscribers) diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index da11036ad804..0a083407aa3e 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -464,6 +464,19 @@ config VIDEO_VPX3220 To compile this driver as a module, choose M here: the module will be called vpx3220. +config VIDEO_MAX9286 + tristate "Maxim MAX9286 GMSL deserializer support" + depends on I2C && I2C_MUX + depends on OF + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + select MEDIA_CONTROLLER + help + This driver supports the Maxim MAX9286 GMSL deserializer. + + To compile this driver as a module, choose M here: the + module will be called max9286. + comment "Video and audio decoders" config VIDEO_SAA717X diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 993acab81b2c..c8010d77e1a3 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -118,6 +118,7 @@ obj-$(CONFIG_VIDEO_IMX274) += imx274.o obj-$(CONFIG_VIDEO_IMX290) += imx290.o obj-$(CONFIG_VIDEO_IMX319) += imx319.o obj-$(CONFIG_VIDEO_IMX355) += imx355.o +obj-$(CONFIG_VIDEO_MAX9286) += max9286.o obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o obj-$(CONFIG_SDR_MAX2175) += max2175.o diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c new file mode 100644 index 000000000000..47f280518fdb --- /dev/null +++ b/drivers/media/i2c/max9286.c @@ -0,0 +1,1320 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Maxim MAX9286 GMSL Deserializer Driver + * + * Copyright (C) 2017-2019 Jacopo Mondi + * Copyright (C) 2017-2019 Kieran Bingham + * Copyright (C) 2017-2019 Laurent Pinchart + * Copyright (C) 2017-2019 Niklas Söderlund + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* Register 0x00 */ +#define MAX9286_MSTLINKSEL_AUTO (7 << 5) +#define MAX9286_MSTLINKSEL(n) ((n) << 5) +#define MAX9286_EN_VS_GEN BIT(4) +#define MAX9286_LINKEN(n) (1 << (n)) +/* Register 0x01 */ +#define MAX9286_FSYNCMODE_ECU (3 << 6) +#define MAX9286_FSYNCMODE_EXT (2 << 6) +#define MAX9286_FSYNCMODE_INT_OUT (1 << 6) +#define MAX9286_FSYNCMODE_INT_HIZ (0 << 6) +#define MAX9286_GPIEN BIT(5) +#define MAX9286_ENLMO_RSTFSYNC BIT(2) +#define MAX9286_FSYNCMETH_AUTO (2 << 0) +#define MAX9286_FSYNCMETH_SEMI_AUTO (1 << 0) +#define MAX9286_FSYNCMETH_MANUAL (0 << 0) +#define MAX9286_REG_FSYNC_PERIOD_L 0x06 +#define MAX9286_REG_FSYNC_PERIOD_M 0x07 +#define MAX9286_REG_FSYNC_PERIOD_H 0x08 +/* Register 0x0a */ +#define MAX9286_FWDCCEN(n) (1 << ((n) + 4)) +#define MAX9286_REVCCEN(n) (1 << (n)) +/* Register 0x0c */ +#define MAX9286_HVEN BIT(7) +#define MAX9286_EDC_6BIT_HAMMING (2 << 5) +#define MAX9286_EDC_6BIT_CRC (1 << 5) +#define MAX9286_EDC_1BIT_PARITY (0 << 5) +#define MAX9286_DESEL BIT(4) +#define MAX9286_INVVS BIT(3) +#define MAX9286_INVHS BIT(2) +#define MAX9286_HVSRC_D0 (2 << 0) +#define MAX9286_HVSRC_D14 (1 << 0) +#define MAX9286_HVSRC_D18 (0 << 0) +/* Register 0x0f */ +#define MAX9286_0X0F_RESERVED BIT(3) +/* Register 0x12 */ +#define MAX9286_CSILANECNT(n) (((n) - 1) << 6) +#define MAX9286_CSIDBL BIT(5) +#define MAX9286_DBL BIT(4) +#define MAX9286_DATATYPE_USER_8BIT (11 << 0) +#define MAX9286_DATATYPE_USER_YUV_12BIT (10 << 0) +#define MAX9286_DATATYPE_USER_24BIT (9 << 0) +#define MAX9286_DATATYPE_RAW14 (8 << 0) +#define MAX9286_DATATYPE_RAW11 (7 << 0) +#define MAX9286_DATATYPE_RAW10 (6 << 0) +#define MAX9286_DATATYPE_RAW8 (5 << 0) +#define MAX9286_DATATYPE_YUV422_10BIT (4 << 0) +#define MAX9286_DATATYPE_YUV422_8BIT (3 << 0) +#define MAX9286_DATATYPE_RGB555 (2 << 0) +#define MAX9286_DATATYPE_RGB565 (1 << 0) +#define MAX9286_DATATYPE_RGB888 (0 << 0) +/* Register 0x15 */ +#define MAX9286_VC(n) ((n) << 5) +#define MAX9286_VCTYPE BIT(4) +#define MAX9286_CSIOUTEN BIT(3) +#define MAX9286_0X15_RESV (3 << 0) +/* Register 0x1b */ +#define MAX9286_SWITCHIN(n) (1 << ((n) + 4)) +#define MAX9286_ENEQ(n) (1 << (n)) +/* Register 0x27 */ +#define MAX9286_LOCKED BIT(7) +/* Register 0x31 */ +#define MAX9286_FSYNC_LOCKED BIT(6) +/* Register 0x34 */ +#define MAX9286_I2CLOCACK BIT(7) +#define MAX9286_I2CSLVSH_1046NS_469NS (3 << 5) +#define MAX9286_I2CSLVSH_938NS_352NS (2 << 5) +#define MAX9286_I2CSLVSH_469NS_234NS (1 << 5) +#define MAX9286_I2CSLVSH_352NS_117NS (0 << 5) +#define MAX9286_I2CMSTBT_837KBPS (7 << 2) +#define MAX9286_I2CMSTBT_533KBPS (6 << 2) +#define MAX9286_I2CMSTBT_339KBPS (5 << 2) +#define MAX9286_I2CMSTBT_173KBPS (4 << 2) +#define MAX9286_I2CMSTBT_105KBPS (3 << 2) +#define MAX9286_I2CMSTBT_84KBPS (2 << 2) +#define MAX9286_I2CMSTBT_28KBPS (1 << 2) +#define MAX9286_I2CMSTBT_8KBPS (0 << 2) +#define MAX9286_I2CSLVTO_NONE (3 << 0) +#define MAX9286_I2CSLVTO_1024US (2 << 0) +#define MAX9286_I2CSLVTO_256US (1 << 0) +#define MAX9286_I2CSLVTO_64US (0 << 0) +/* Register 0x3b */ +#define MAX9286_REV_TRF(n) ((n) << 4) +#define MAX9286_REV_AMP(n) ((((n) - 30) / 10) << 1) /* in mV */ +#define MAX9286_REV_AMP_X BIT(0) +/* Register 0x3f */ +#define MAX9286_EN_REV_CFG BIT(6) +#define MAX9286_REV_FLEN(n) ((n) - 20) +/* Register 0x49 */ +#define MAX9286_VIDEO_DETECT_MASK 0x0f +/* Register 0x69 */ +#define MAX9286_LFLTBMONMASKED BIT(7) +#define MAX9286_LOCKMONMASKED BIT(6) +#define MAX9286_AUTOCOMBACKEN BIT(5) +#define MAX9286_AUTOMASKEN BIT(4) +#define MAX9286_MASKLINK(n) ((n) << 0) + +/* + * The sink and source pads are created to match the OF graph port numbers so + * that their indexes can be used interchangeably. + */ +#define MAX9286_NUM_GMSL 4 +#define MAX9286_N_SINKS 4 +#define MAX9286_N_PADS 5 +#define MAX9286_SRC_PAD 4 + +struct max9286_source { + struct v4l2_async_subdev asd; + struct v4l2_subdev *sd; + struct fwnode_handle *fwnode; +}; + +#define asd_to_max9286_source(_asd) \ + container_of(_asd, struct max9286_source, asd) + +struct max9286_priv { + struct i2c_client *client; + struct gpio_desc *gpiod_pwdn; + struct v4l2_subdev sd; + struct media_pad pads[MAX9286_N_PADS]; + struct regulator *regulator; + + struct gpio_chip gpio; + u8 gpio_state; + + struct i2c_mux_core *mux; + unsigned int mux_channel; + bool mux_open; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *pixelrate; + + struct v4l2_mbus_framefmt fmt[MAX9286_N_SINKS]; + + /* Protects controls and fmt structures */ + struct mutex mutex; + + unsigned int nsources; + unsigned int source_mask; + unsigned int route_mask; + unsigned int bound_sources; + unsigned int csi2_data_lanes; + struct max9286_source sources[MAX9286_NUM_GMSL]; + struct v4l2_async_notifier notifier; +}; + +static struct max9286_source *next_source(struct max9286_priv *priv, + struct max9286_source *source) +{ + if (!source) + source = &priv->sources[0]; + else + source++; + + for (; source < &priv->sources[MAX9286_NUM_GMSL]; source++) { + if (source->fwnode) + return source; + } + + return NULL; +} + +#define for_each_source(priv, source) \ + for ((source) = NULL; ((source) = next_source((priv), (source))); ) + +#define to_index(priv, source) ((source) - &(priv)->sources[0]) + +static inline struct max9286_priv *sd_to_max9286(struct v4l2_subdev *sd) +{ + return container_of(sd, struct max9286_priv, sd); +} + +/* ----------------------------------------------------------------------------- + * I2C IO + */ + +static int max9286_read(struct max9286_priv *priv, u8 reg) +{ + int ret; + + ret = i2c_smbus_read_byte_data(priv->client, reg); + if (ret < 0) + dev_err(&priv->client->dev, + "%s: register 0x%02x read failed (%d)\n", + __func__, reg, ret); + + return ret; +} + +static int max9286_write(struct max9286_priv *priv, u8 reg, u8 val) +{ + int ret; + + ret = i2c_smbus_write_byte_data(priv->client, reg, val); + if (ret < 0) + dev_err(&priv->client->dev, + "%s: register 0x%02x write failed (%d)\n", + __func__, reg, ret); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * I2C Multiplexer + */ + +static void max9286_i2c_mux_configure(struct max9286_priv *priv, u8 conf) +{ + max9286_write(priv, 0x0a, conf); + + /* + * We must sleep after any change to the forward or reverse channel + * configuration. + */ + usleep_range(3000, 5000); +} + +static void max9286_i2c_mux_open(struct max9286_priv *priv) +{ + /* Open all channels on the MAX9286 */ + max9286_i2c_mux_configure(priv, 0xff); + + priv->mux_open = true; +} + +static void max9286_i2c_mux_close(struct max9286_priv *priv) +{ + /* + * Ensure that both the forward and reverse channel are disabled on the + * mux, and that the channel ID is invalidated to ensure we reconfigure + * on the next max9286_i2c_mux_select() call. + */ + max9286_i2c_mux_configure(priv, 0x00); + + priv->mux_open = false; + priv->mux_channel = -1; +} + +static int max9286_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan) +{ + struct max9286_priv *priv = i2c_mux_priv(muxc); + + /* Channel select is disabled when configured in the opened state. */ + if (priv->mux_open) + return 0; + + if (priv->mux_channel == chan) + return 0; + + priv->mux_channel = chan; + + max9286_i2c_mux_configure(priv, + MAX9286_FWDCCEN(chan) | + MAX9286_REVCCEN(chan)); + + return 0; +} + +static int max9286_i2c_mux_init(struct max9286_priv *priv) +{ + struct max9286_source *source; + int ret; + + if (!i2c_check_functionality(priv->client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -ENODEV; + + priv->mux = i2c_mux_alloc(priv->client->adapter, &priv->client->dev, + priv->nsources, 0, I2C_MUX_LOCKED, + max9286_i2c_mux_select, NULL); + if (!priv->mux) + return -ENOMEM; + + priv->mux->priv = priv; + + for_each_source(priv, source) { + unsigned int index = to_index(priv, source); + + ret = i2c_mux_add_adapter(priv->mux, 0, index, 0); + if (ret < 0) + goto error; + } + + return 0; + +error: + i2c_mux_del_adapters(priv->mux); + return ret; +} + +static void max9286_configure_i2c(struct max9286_priv *priv, bool localack) +{ + u8 config = MAX9286_I2CSLVSH_469NS_234NS | MAX9286_I2CSLVTO_1024US | + MAX9286_I2CMSTBT_105KBPS; + + if (localack) + config |= MAX9286_I2CLOCACK; + + max9286_write(priv, 0x34, config); + usleep_range(3000, 5000); +} + +/* + * max9286_check_video_links() - Make sure video links are detected and locked + * + * Performs safety checks on video link status. Make sure they are detected + * and all enabled links are locked. + * + * Returns 0 for success, -EIO for errors. + */ +static int max9286_check_video_links(struct max9286_priv *priv) +{ + unsigned int i; + int ret; + + /* + * Make sure valid video links are detected. + * The delay is not characterized in de-serializer manual, wait up + * to 5 ms. + */ + for (i = 0; i < 10; i++) { + ret = max9286_read(priv, 0x49); + if (ret < 0) + return -EIO; + + if ((ret & MAX9286_VIDEO_DETECT_MASK) == priv->source_mask) + break; + + usleep_range(350, 500); + } + + if (i == 10) { + dev_err(&priv->client->dev, + "Unable to detect video links: 0x%02x\n", ret); + return -EIO; + } + + /* Make sure all enabled links are locked (4ms max). */ + for (i = 0; i < 10; i++) { + ret = max9286_read(priv, 0x27); + if (ret < 0) + return -EIO; + + if (ret & MAX9286_LOCKED) + break; + + usleep_range(350, 450); + } + + if (i == 10) { + dev_err(&priv->client->dev, "Not all enabled links locked\n"); + return -EIO; + } + + return 0; +} + +/* + * max9286_check_config_link() - Detect and wait for configuration links + * + * Determine if the configuration channel is up and settled for a link. + * + * Returns 0 for success, -EIO for errors. + */ +static int max9286_check_config_link(struct max9286_priv *priv, + unsigned int source_mask) +{ + unsigned int conflink_mask = (source_mask & 0x0f) << 4; + unsigned int i; + int ret; + + /* + * Make sure requested configuration links are detected. + * The delay is not characterized in the chip manual: wait up + * to 5 milliseconds. + */ + for (i = 0; i < 10; i++) { + ret = max9286_read(priv, 0x49) & 0xf0; + if (ret < 0) + return -EIO; + + if (ret == conflink_mask) + break; + + usleep_range(350, 500); + } + + if (ret != conflink_mask) { + dev_err(&priv->client->dev, + "Unable to detect configuration links: 0x%02x expected 0x%02x\n", + ret, conflink_mask); + return -EIO; + } + + dev_info(&priv->client->dev, + "Successfully detected configuration links after %u loops: 0x%02x\n", + i, conflink_mask); + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdev + */ + +static int max9286_set_pixelrate(struct max9286_priv *priv) +{ + struct max9286_source *source = NULL; + u64 pixelrate = 0; + + for_each_source(priv, source) { + struct v4l2_ctrl *ctrl; + u64 source_rate = 0; + + /* Pixel rate is mandatory to be reported by sources. */ + ctrl = v4l2_ctrl_find(source->sd->ctrl_handler, + V4L2_CID_PIXEL_RATE); + if (!ctrl) { + pixelrate = 0; + break; + } + + /* All source must report the same pixel rate. */ + source_rate = v4l2_ctrl_g_ctrl_int64(ctrl); + if (!pixelrate) { + pixelrate = source_rate; + } else if (pixelrate != source_rate) { + dev_err(&priv->client->dev, + "Unable to calculate pixel rate\n"); + return -EINVAL; + } + } + + if (!pixelrate) { + dev_err(&priv->client->dev, + "No pixel rate control available in sources\n"); + return -EINVAL; + } + + /* + * The CSI-2 transmitter pixel rate is the single source rate multiplied + * by the number of available sources. + */ + return v4l2_ctrl_s_ctrl_int64(priv->pixelrate, + pixelrate * priv->nsources); +} + +static int max9286_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct max9286_priv *priv = sd_to_max9286(notifier->sd); + struct max9286_source *source = asd_to_max9286_source(asd); + unsigned int index = to_index(priv, source); + unsigned int src_pad; + int ret; + + ret = media_entity_get_fwnode_pad(&subdev->entity, + source->fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(&priv->client->dev, + "Failed to find pad for %s\n", subdev->name); + return ret; + } + + priv->bound_sources |= BIT(index); + source->sd = subdev; + src_pad = ret; + + ret = media_create_pad_link(&source->sd->entity, src_pad, + &priv->sd.entity, index, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(&priv->client->dev, + "Unable to link %s:%u -> %s:%u\n", + source->sd->name, src_pad, priv->sd.name, index); + return ret; + } + + dev_dbg(&priv->client->dev, "Bound %s pad: %u on index %u\n", + subdev->name, src_pad, index); + + /* + * We can only register v4l2_async_notifiers, which do not provide a + * means to register a complete callback. bound_sources allows us to + * identify when all remote serializers have completed their probe. + */ + if (priv->bound_sources != priv->source_mask) + return 0; + + /* + * All enabled sources have probed and enabled their reverse control + * channels: + * + * - Verify all configuration links are properly detected + * - Disable auto-ack as communication on the control channel are now + * stable. + */ + max9286_check_config_link(priv, priv->source_mask); + + /* + * Re-configure I2C with local acknowledge disabled after cameras have + * probed. + */ + max9286_configure_i2c(priv, false); + + return max9286_set_pixelrate(priv); +} + +static void max9286_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct max9286_priv *priv = sd_to_max9286(notifier->sd); + struct max9286_source *source = asd_to_max9286_source(asd); + unsigned int index = to_index(priv, source); + + source->sd = NULL; + priv->bound_sources &= ~BIT(index); +} + +static const struct v4l2_async_notifier_operations max9286_notify_ops = { + .bound = max9286_notify_bound, + .unbind = max9286_notify_unbind, +}; + +static int max9286_v4l2_notifier_register(struct max9286_priv *priv) +{ + struct device *dev = &priv->client->dev; + struct max9286_source *source = NULL; + int ret; + + if (!priv->nsources) + return 0; + + v4l2_async_notifier_init(&priv->notifier); + + for_each_source(priv, source) { + unsigned int i = to_index(priv, source); + + source->asd.match_type = V4L2_ASYNC_MATCH_FWNODE; + source->asd.match.fwnode = source->fwnode; + + ret = v4l2_async_notifier_add_subdev(&priv->notifier, + &source->asd); + if (ret) { + dev_err(dev, "Failed to add subdev for source %d", i); + v4l2_async_notifier_cleanup(&priv->notifier); + return ret; + } + + /* + * Balance the reference counting handled through + * v4l2_async_notifier_cleanup() + */ + fwnode_handle_get(source->fwnode); + } + + priv->notifier.ops = &max9286_notify_ops; + + ret = v4l2_async_subdev_notifier_register(&priv->sd, &priv->notifier); + if (ret) { + dev_err(dev, "Failed to register subdev_notifier"); + v4l2_async_notifier_cleanup(&priv->notifier); + return ret; + } + + return 0; +} + +static void max9286_v4l2_notifier_unregister(struct max9286_priv *priv) +{ + if (!priv->nsources) + return; + + v4l2_async_notifier_unregister(&priv->notifier); + v4l2_async_notifier_cleanup(&priv->notifier); +} + +static int max9286_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct max9286_priv *priv = sd_to_max9286(sd); + struct max9286_source *source; + unsigned int i; + bool sync = false; + int ret; + + if (enable) { + /* + * The frame sync between cameras is transmitted across the + * reverse channel as GPIO. We must open all channels while + * streaming to allow this synchronisation signal to be shared. + */ + max9286_i2c_mux_open(priv); + + /* Start all cameras. */ + for_each_source(priv, source) { + ret = v4l2_subdev_call(source->sd, video, s_stream, 1); + if (ret) + return ret; + } + + ret = max9286_check_video_links(priv); + if (ret) + return ret; + + /* + * Wait until frame synchronization is locked. + * + * Manual says frame sync locking should take ~6 VTS. + * From practical experience at least 8 are required. Give + * 12 complete frames time (~400ms at 30 fps) to achieve frame + * locking before returning error. + */ + for (i = 0; i < 40; i++) { + if (max9286_read(priv, 0x31) & MAX9286_FSYNC_LOCKED) { + sync = true; + break; + } + usleep_range(9000, 11000); + } + + if (!sync) { + dev_err(&priv->client->dev, + "Failed to get frame synchronization\n"); + return -EXDEV; /* Invalid cross-device link */ + } + + /* + * Enable CSI output, VC set according to link number. + * Bit 7 must be set (chip manual says it's 0 and reserved). + */ + max9286_write(priv, 0x15, 0x80 | MAX9286_VCTYPE | + MAX9286_CSIOUTEN | MAX9286_0X15_RESV); + } else { + max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV); + + /* Stop all cameras. */ + for_each_source(priv, source) + v4l2_subdev_call(source->sd, video, s_stream, 0); + + max9286_i2c_mux_close(priv); + } + + return 0; +} + +static int max9286_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->pad || code->index > 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_UYVY8_1X16; + + return 0; +} + +static struct v4l2_mbus_framefmt * +max9286_get_pad_format(struct max9286_priv *priv, + struct v4l2_subdev_pad_config *cfg, + unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(&priv->sd, cfg, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &priv->fmt[pad]; + default: + return NULL; + } +} + +static int max9286_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct max9286_priv *priv = sd_to_max9286(sd); + struct v4l2_mbus_framefmt *cfg_fmt; + + if (format->pad == MAX9286_SRC_PAD) + return -EINVAL; + + /* Refuse non YUV422 formats as we hardcode DT to 8 bit YUV422 */ + switch (format->format.code) { + case MEDIA_BUS_FMT_UYVY8_1X16: + case MEDIA_BUS_FMT_VYUY8_1X16: + case MEDIA_BUS_FMT_YUYV8_1X16: + case MEDIA_BUS_FMT_YVYU8_1X16: + break; + default: + format->format.code = MEDIA_BUS_FMT_UYVY8_1X16; + break; + } + + cfg_fmt = max9286_get_pad_format(priv, cfg, format->pad, format->which); + if (!cfg_fmt) + return -EINVAL; + + mutex_lock(&priv->mutex); + *cfg_fmt = format->format; + mutex_unlock(&priv->mutex); + + return 0; +} + +static int max9286_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct max9286_priv *priv = sd_to_max9286(sd); + struct v4l2_mbus_framefmt *cfg_fmt; + unsigned int pad = format->pad; + + /* + * Multiplexed Stream Support: Support link validation by returning the + * format of the first bound link. All links must have the same format, + * as we do not support mixing and matching of cameras connected to the + * max9286. + */ + if (pad == MAX9286_SRC_PAD) + pad = __ffs(priv->bound_sources); + + cfg_fmt = max9286_get_pad_format(priv, cfg, pad, format->which); + if (!cfg_fmt) + return -EINVAL; + + mutex_lock(&priv->mutex); + format->format = *cfg_fmt; + mutex_unlock(&priv->mutex); + + return 0; +} + +static const struct v4l2_subdev_video_ops max9286_video_ops = { + .s_stream = max9286_s_stream, +}; + +static const struct v4l2_subdev_pad_ops max9286_pad_ops = { + .enum_mbus_code = max9286_enum_mbus_code, + .get_fmt = max9286_get_fmt, + .set_fmt = max9286_set_fmt, +}; + +static const struct v4l2_subdev_ops max9286_subdev_ops = { + .video = &max9286_video_ops, + .pad = &max9286_pad_ops, +}; + +static void max9286_init_format(struct v4l2_mbus_framefmt *fmt) +{ + fmt->width = 1280; + fmt->height = 800; + fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; + fmt->colorspace = V4L2_COLORSPACE_SRGB; + fmt->field = V4L2_FIELD_NONE; + fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + fmt->quantization = V4L2_QUANTIZATION_DEFAULT; + fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; +} + +static int max9286_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format; + unsigned int i; + + for (i = 0; i < MAX9286_N_SINKS; i++) { + format = v4l2_subdev_get_try_format(subdev, fh->pad, i); + max9286_init_format(format); + } + + return 0; +} + +static const struct v4l2_subdev_internal_ops max9286_subdev_internal_ops = { + .open = max9286_open, +}; + +static int max9286_s_ctrl(struct v4l2_ctrl *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_PIXEL_RATE: + return 0; + default: + return -EINVAL; + } +} + +static const struct v4l2_ctrl_ops max9286_ctrl_ops = { + .s_ctrl = max9286_s_ctrl, +}; + +static int max9286_v4l2_register(struct max9286_priv *priv) +{ + struct device *dev = &priv->client->dev; + struct fwnode_handle *ep; + int ret; + int i; + + /* Register v4l2 async notifiers for connected Camera subdevices */ + ret = max9286_v4l2_notifier_register(priv); + if (ret) { + dev_err(dev, "Unable to register V4L2 async notifiers\n"); + return ret; + } + + /* Configure V4L2 for the MAX9286 itself */ + + for (i = 0; i < MAX9286_N_SINKS; i++) + max9286_init_format(&priv->fmt[i]); + + v4l2_i2c_subdev_init(&priv->sd, priv->client, &max9286_subdev_ops); + priv->sd.internal_ops = &max9286_subdev_internal_ops; + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + v4l2_ctrl_handler_init(&priv->ctrls, 1); + priv->pixelrate = v4l2_ctrl_new_std(&priv->ctrls, + &max9286_ctrl_ops, + V4L2_CID_PIXEL_RATE, + 1, INT_MAX, 1, 50000000); + + priv->sd.ctrl_handler = &priv->ctrls; + ret = priv->ctrls.error; + if (ret) + goto err_async; + + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + + priv->pads[MAX9286_SRC_PAD].flags = MEDIA_PAD_FL_SOURCE; + for (i = 0; i < MAX9286_SRC_PAD; i++) + priv->pads[i].flags = MEDIA_PAD_FL_SINK; + ret = media_entity_pads_init(&priv->sd.entity, MAX9286_N_PADS, + priv->pads); + if (ret) + goto err_async; + + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), MAX9286_SRC_PAD, + 0, 0); + if (!ep) { + dev_err(dev, "Unable to retrieve endpoint on \"port@4\"\n"); + ret = -ENOENT; + goto err_async; + } + priv->sd.fwnode = ep; + + ret = v4l2_async_register_subdev(&priv->sd); + if (ret < 0) { + dev_err(dev, "Unable to register subdevice\n"); + goto err_put_node; + } + + return 0; + +err_put_node: + fwnode_handle_put(ep); +err_async: + max9286_v4l2_notifier_unregister(priv); + + return ret; +} + +static void max9286_v4l2_unregister(struct max9286_priv *priv) +{ + fwnode_handle_put(priv->sd.fwnode); + v4l2_async_unregister_subdev(&priv->sd); + max9286_v4l2_notifier_unregister(priv); +} + +/* ----------------------------------------------------------------------------- + * Probe/Remove + */ + +static int max9286_setup(struct max9286_priv *priv) +{ + /* + * Link ordering values for all enabled links combinations. Orders must + * be assigned sequentially from 0 to the number of enabled links + * without leaving any hole for disabled links. We thus assign orders to + * enabled links first, and use the remaining order values for disabled + * links are all links must have a different order value; + */ + static const u8 link_order[] = { + (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xxxx */ + (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xxx0 */ + (3 << 6) | (2 << 4) | (0 << 2) | (1 << 0), /* xx0x */ + (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xx10 */ + (3 << 6) | (0 << 4) | (2 << 2) | (1 << 0), /* x0xx */ + (3 << 6) | (1 << 4) | (2 << 2) | (0 << 0), /* x1x0 */ + (3 << 6) | (1 << 4) | (0 << 2) | (2 << 0), /* x10x */ + (3 << 6) | (1 << 4) | (1 << 2) | (0 << 0), /* x210 */ + (0 << 6) | (3 << 4) | (2 << 2) | (1 << 0), /* 0xxx */ + (1 << 6) | (3 << 4) | (2 << 2) | (0 << 0), /* 1xx0 */ + (1 << 6) | (3 << 4) | (0 << 2) | (2 << 0), /* 1x0x */ + (2 << 6) | (3 << 4) | (1 << 2) | (0 << 0), /* 2x10 */ + (1 << 6) | (0 << 4) | (3 << 2) | (2 << 0), /* 10xx */ + (2 << 6) | (1 << 4) | (3 << 2) | (0 << 0), /* 21x0 */ + (2 << 6) | (1 << 4) | (0 << 2) | (3 << 0), /* 210x */ + (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* 3210 */ + }; + + /* + * Set the I2C bus speed. + * + * Enable I2C Local Acknowledge during the probe sequences of the camera + * only. This should be disabled after the mux is initialised. + */ + max9286_configure_i2c(priv, true); + + /* + * Reverse channel setup. + * + * - Enable custom reverse channel configuration (through register 0x3f) + * and set the first pulse length to 35 clock cycles. + * - Increase the reverse channel amplitude to 170mV to accommodate the + * high threshold enabled by the serializer driver. + */ + max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35)); + max9286_write(priv, 0x3b, MAX9286_REV_TRF(1) | MAX9286_REV_AMP(70) | + MAX9286_REV_AMP_X); + usleep_range(2000, 2500); + + /* + * Enable GMSL links, mask unused ones and autodetect link + * used as CSI clock source. + */ + max9286_write(priv, 0x00, MAX9286_MSTLINKSEL_AUTO | priv->route_mask); + max9286_write(priv, 0x0b, link_order[priv->route_mask]); + max9286_write(priv, 0x69, (0xf & ~priv->route_mask)); + + /* + * Video format setup: + * Disable CSI output, VC is set according to Link number. + */ + max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV); + + /* Enable CSI-2 Lane D0-D3 only, DBL mode, YUV422 8-bit. */ + max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL | + MAX9286_CSILANECNT(priv->csi2_data_lanes) | + MAX9286_DATATYPE_YUV422_8BIT); + + /* Automatic: FRAMESYNC taken from the slowest Link. */ + max9286_write(priv, 0x01, MAX9286_FSYNCMODE_INT_HIZ | + MAX9286_FSYNCMETH_AUTO); + + /* Enable HS/VS encoding, use D14/15 for HS/VS, invert VS. */ + max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_INVVS | + MAX9286_HVSRC_D14); + + /* + * The overlap window seems to provide additional validation by tracking + * the delay between vsync and frame sync, generating an error if the + * delay is bigger than the programmed window, though it's not yet clear + * what value should be set. + * + * As it's an optional value and can be disabled, we do so by setting + * a 0 overlap value. + */ + max9286_write(priv, 0x63, 0); + max9286_write(priv, 0x64, 0); + + /* + * Wait for 2ms to allow the link to resynchronize after the + * configuration change. + */ + usleep_range(2000, 5000); + + return 0; +} + +static void max9286_gpio_set(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct max9286_priv *priv = gpiochip_get_data(chip); + + if (value) + priv->gpio_state |= BIT(offset); + else + priv->gpio_state &= ~BIT(offset); + + max9286_write(priv, 0x0f, MAX9286_0X0F_RESERVED | priv->gpio_state); +} + +static int max9286_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct max9286_priv *priv = gpiochip_get_data(chip); + + return priv->gpio_state & BIT(offset); +} + +static int max9286_register_gpio(struct max9286_priv *priv) +{ + struct device *dev = &priv->client->dev; + struct gpio_chip *gpio = &priv->gpio; + int ret; + + /* Configure the GPIO */ + gpio->label = dev_name(dev); + gpio->parent = dev; + gpio->owner = THIS_MODULE; + gpio->of_node = dev->of_node; + gpio->ngpio = 2; + gpio->base = -1; + gpio->set = max9286_gpio_set; + gpio->get = max9286_gpio_get; + gpio->can_sleep = true; + + /* GPIO values default to high */ + priv->gpio_state = BIT(0) | BIT(1); + + ret = devm_gpiochip_add_data(dev, gpio, priv); + if (ret) + dev_err(dev, "Unable to create gpio_chip\n"); + + return ret; +} + +static int max9286_init(struct device *dev) +{ + struct max9286_priv *priv; + struct i2c_client *client; + int ret; + + client = to_i2c_client(dev); + priv = i2c_get_clientdata(client); + + /* Enable the bus power. */ + ret = regulator_enable(priv->regulator); + if (ret < 0) { + dev_err(&client->dev, "Unable to turn PoC on\n"); + return ret; + } + + ret = max9286_setup(priv); + if (ret) { + dev_err(dev, "Unable to setup max9286\n"); + goto err_regulator; + } + + /* + * Register all V4L2 interactions for the MAX9286 and notifiers for + * any subdevices connected. + */ + ret = max9286_v4l2_register(priv); + if (ret) { + dev_err(dev, "Failed to register with V4L2\n"); + goto err_regulator; + } + + ret = max9286_i2c_mux_init(priv); + if (ret) { + dev_err(dev, "Unable to initialize I2C multiplexer\n"); + goto err_v4l2_register; + } + + /* Leave the mux channels disabled until they are selected. */ + max9286_i2c_mux_close(priv); + + return 0; + +err_v4l2_register: + max9286_v4l2_unregister(priv); +err_regulator: + regulator_disable(priv->regulator); + + return ret; +} + +static void max9286_cleanup_dt(struct max9286_priv *priv) +{ + struct max9286_source *source; + + for_each_source(priv, source) { + fwnode_handle_put(source->fwnode); + source->fwnode = NULL; + } +} + +static int max9286_parse_dt(struct max9286_priv *priv) +{ + struct device *dev = &priv->client->dev; + struct device_node *i2c_mux; + struct device_node *node = NULL; + unsigned int i2c_mux_mask = 0; + + /* Balance the of_node_put() performed by of_find_node_by_name(). */ + of_node_get(dev->of_node); + i2c_mux = of_find_node_by_name(dev->of_node, "i2c-mux"); + if (!i2c_mux) { + dev_err(dev, "Failed to find i2c-mux node\n"); + return -EINVAL; + } + + /* Identify which i2c-mux channels are enabled */ + for_each_child_of_node(i2c_mux, node) { + u32 id = 0; + + of_property_read_u32(node, "reg", &id); + if (id >= MAX9286_NUM_GMSL) + continue; + + if (!of_device_is_available(node)) { + dev_dbg(dev, "Skipping disabled I2C bus port %u\n", id); + continue; + } + + i2c_mux_mask |= BIT(id); + } + of_node_put(node); + of_node_put(i2c_mux); + + /* Parse the endpoints */ + for_each_endpoint_of_node(dev->of_node, node) { + struct max9286_source *source; + struct of_endpoint ep; + + of_graph_parse_endpoint(node, &ep); + dev_dbg(dev, "Endpoint %pOF on port %d", + ep.local_node, ep.port); + + if (ep.port > MAX9286_NUM_GMSL) { + dev_err(dev, "Invalid endpoint %s on port %d", + of_node_full_name(ep.local_node), ep.port); + continue; + } + + /* For the source endpoint just parse the bus configuration. */ + if (ep.port == MAX9286_SRC_PAD) { + struct v4l2_fwnode_endpoint vep = { + .bus_type = V4L2_MBUS_CSI2_DPHY + }; + int ret; + + ret = v4l2_fwnode_endpoint_parse( + of_fwnode_handle(node), &vep); + if (ret) { + of_node_put(node); + return ret; + } + + priv->csi2_data_lanes = + vep.bus.mipi_csi2.num_data_lanes; + + continue; + } + + /* Skip if the corresponding GMSL link is unavailable. */ + if (!(i2c_mux_mask & BIT(ep.port))) + continue; + + if (priv->sources[ep.port].fwnode) { + dev_err(dev, + "Multiple port endpoints are not supported: %d", + ep.port); + + continue; + } + + source = &priv->sources[ep.port]; + source->fwnode = fwnode_graph_get_remote_endpoint( + of_fwnode_handle(node)); + if (!source->fwnode) { + dev_err(dev, + "Endpoint %pOF has no remote endpoint connection\n", + ep.local_node); + + continue; + } + + priv->source_mask |= BIT(ep.port); + priv->nsources++; + } + of_node_put(node); + + priv->route_mask = priv->source_mask; + + return 0; +} + +static int max9286_probe(struct i2c_client *client) +{ + struct max9286_priv *priv; + int ret; + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->mutex); + + priv->client = client; + i2c_set_clientdata(client, priv); + + priv->gpiod_pwdn = devm_gpiod_get_optional(&client->dev, "enable", + GPIOD_OUT_HIGH); + if (IS_ERR(priv->gpiod_pwdn)) + return PTR_ERR(priv->gpiod_pwdn); + + gpiod_set_consumer_name(priv->gpiod_pwdn, "max9286-pwdn"); + gpiod_set_value_cansleep(priv->gpiod_pwdn, 1); + + /* Wait at least 4ms before the I2C lines latch to the address */ + if (priv->gpiod_pwdn) + usleep_range(4000, 5000); + + /* + * The MAX9286 starts by default with all ports enabled, we disable all + * ports early to ensure that all channels are disabled if we error out + * and keep the bus consistent. + */ + max9286_i2c_mux_close(priv); + + /* + * The MAX9286 initialises with auto-acknowledge enabled by default. + * This can be invasive to other transactions on the same bus, so + * disable it early. It will be enabled only as and when needed. + */ + max9286_configure_i2c(priv, false); + + ret = max9286_register_gpio(priv); + if (ret) + goto err_powerdown; + + priv->regulator = devm_regulator_get(&client->dev, "poc"); + if (IS_ERR(priv->regulator)) { + if (PTR_ERR(priv->regulator) != -EPROBE_DEFER) + dev_err(&client->dev, + "Unable to get PoC regulator (%ld)\n", + PTR_ERR(priv->regulator)); + ret = PTR_ERR(priv->regulator); + goto err_powerdown; + } + + ret = max9286_parse_dt(priv); + if (ret) + goto err_powerdown; + + ret = max9286_init(&client->dev); + if (ret < 0) + goto err_cleanup_dt; + + return 0; + +err_cleanup_dt: + max9286_cleanup_dt(priv); +err_powerdown: + gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); + + return ret; +} + +static int max9286_remove(struct i2c_client *client) +{ + struct max9286_priv *priv = i2c_get_clientdata(client); + + i2c_mux_del_adapters(priv->mux); + + max9286_v4l2_unregister(priv); + + regulator_disable(priv->regulator); + + gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); + + max9286_cleanup_dt(priv); + + return 0; +} + +static const struct of_device_id max9286_dt_ids[] = { + { .compatible = "maxim,max9286" }, + {}, +}; +MODULE_DEVICE_TABLE(of, max9286_dt_ids); + +static struct i2c_driver max9286_i2c_driver = { + .driver = { + .name = "max9286", + .of_match_table = of_match_ptr(max9286_dt_ids), + }, + .probe_new = max9286_probe, + .remove = max9286_remove, +}; + +module_i2c_driver(max9286_i2c_driver); + +MODULE_DESCRIPTION("Maxim MAX9286 GMSL Deserializer Driver"); +MODULE_AUTHOR("Jacopo Mondi, Kieran Bingham, Laurent Pinchart, Niklas Söderlund, Vladimir Barinov"); +MODULE_LICENSE("GPL"); From patchwork Fri Jun 12 14:47:12 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Kieran Bingham X-Patchwork-Id: 11601747 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E88BB913 for ; Fri, 12 Jun 2020 14:47:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C9D4E206A4 for ; Fri, 12 Jun 2020 14:47:43 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="Ai1NCP3W" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726561AbgFLOrY (ORCPT ); Fri, 12 Jun 2020 10:47:24 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58698 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726542AbgFLOrX (ORCPT ); Fri, 12 Jun 2020 10:47:23 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7530DC03E96F; Fri, 12 Jun 2020 07:47:23 -0700 (PDT) Received: from Q.local (cpc89242-aztw30-2-0-cust488.18-1.cable.virginm.net [86.31.129.233]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 4D121B1A; Fri, 12 Jun 2020 16:47:21 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1591973242; bh=zsgqf8RLDeGBCTHNd5KBZWdXP+BQTaHck9Vt+IcKzeY=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=Ai1NCP3W7T8o7ReurqbVkkYV9xjTfh/ma4ckUHh+KedCs84Q46vG7EWKDfNhiiH4j 7KmLWZMSW5dccOotqNtSqBjZNbqnA+QsMoEehtTUPV+u5QZ55MN8lkjPKyFousevT1 yBu6/oXbotwwnaG8Mm8kGznyMObuUlSSRGXr+ALY= From: Kieran Bingham To: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Mauro Carvalho Chehab , sakari.ailus@iki.fi Cc: Kieran Bingham , Laurent Pinchart , Jacopo Mondi , =?utf-8?q?Niklas_S=C3=B6derlund?= , Hans Verkuil , Hyun Kwon , Manivannan Sadhasivam , Rob Herring , Linus Walleij , Jacopo Mondi , Kieran Bingham , Rob Herring Subject: [PATCH v10 3/4] dt-bindings: media: i2c: Add bindings for IMI RDACM2x Date: Fri, 12 Jun 2020 15:47:12 +0100 Message-Id: <20200612144713.502006-4-kieran.bingham+renesas@ideasonboard.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200612144713.502006-1-kieran.bingham+renesas@ideasonboard.com> References: <20200612144713.502006-1-kieran.bingham+renesas@ideasonboard.com> MIME-Version: 1.0 Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Jacopo Mondi The IMI RDACM20 and IMI RDACM21 are Gigabit Multimedia Serial Link (GMSL) camera capable of transmitting video and I2C control messages on a coax cable physical link for automotive applications. Document their device tree bindings. Signed-off-by: Jacopo Mondi Signed-off-by: Kieran Bingham Reviewed-by: Laurent Pinchart Reviewed-by: Rob Herring --- v2: - Provide imi vendor prefix - Fix minor spelling v3: - update binding descriptions v4: - No change v5: - Specify optional third reg address for the MCU v7: [Jacopo] - Rename to imi,rdacm2x-gmsl.yaml - Exand bindings to describe RDACM21 v9: [Jacopo] - Rework 'compatible' property as suggested by Rob - Re-order vendor prefixes ('g' comes before 'i' ... ) - Add Rob's tag .../bindings/media/i2c/imi,rdacm2x-gmsl.yaml | 159 ++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 2 files changed, 161 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml new file mode 100644 index 000000000000..fe524490e6a2 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright (C) 2019 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms + +maintainers: + - Jacopo Mondi + - Kieran Bingham + - Laurent Pinchart + - Niklas Söderlund + +description: -| + The IMI D&D RDACM20 and RDACM21 are GMSL-compatible camera designed for + automotive applications. + + The RDACM20 camera module encloses a Maxim Integrated MAX9271 GMSL serializer, + coupled with an OV10635 image sensor and an embedded MCU. Both the MCU and + the image sensor are connected to the serializer local I2C bus and are + accessible by the host SoC by direct addressing. + + The RDACM21 camera module encloses the same serializer, coupled with an + OV10640 image sensor and an OV490 ISP. Only the OV490 ISP is interfaced to + the serializer local I2C bus while the image sensor is not accessible from + the host SoC. + + They both connect to a remote GMSL endpoint through a coaxial cable. + + IMI RDACM20 + +---------------+ +--------------------------------+ + | GMSL | <- Video Stream | <- Video--------\ | + | |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV10635 | + | de-serializer | <- I2C messages -> | \<-->MCU | + +---------------+ +--------------------------------+ + + IMI RDACM21 + +---------------+ +--------------------------------+ + | GMSL | <- Video Stream | <- Video--------\ | + | |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV490 | + | | <- I2C messages -> | | | + | de-serializer | | OV10640 <-------| | + +---------------+ +--------------------------------+ + + Both camera modules serialize video data generated by the embedded camera + sensor on the GMSL serial channel to a remote GMSL de-serializer. They also + receive and transmit I2C messages encapsulated and transmitted on the GMSL + bidirectional control channel. + + All I2C traffic received on the GMSL link not directed to the serializer is + propagated on the local I2C bus to the remote device there connected. All the + I2C traffic generated on the local I2C bus not directed to the serializer is + propagated to the remote de-serializer encapsulated in the GMSL control + channel. + + The RDACM20 and RDACM21 DT node should be a direct child of the GMSL + deserializer's I2C bus corresponding to the GMSL link that the camera is + attached to. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + enum: + - imi,rdacm20 + - imi,rdacm21 + + reg: + description: -| + I2C device addresses, the first to be assigned to the serializer, the + following ones to be assigned to the remote devices. + + For RDACM20 the second entry of the property is assigned to the + OV10635 image sensor and the optional third one to the embedded MCU. + + For RDACM21 the second entry is assigned to the OV490 ISP and the optional + third one ignored. + + minItems: 2 + maxItems: 3 + + port: + type: object + additionalProperties: false + description: -| + Connection to the remote GMSL endpoint are modelled using the OF graph + bindings in accordance with the video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + The device node contains a single "port" child node with a single + "endpoint" sub-device. + + properties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: + description: -| + phandle to the remote GMSL endpoint sub-node in the remote node + port. + maxItems: 1 + + required: + - remote-endpoint + + required: + - endpoint + +required: + - compatible + - reg + - port + +examples: + - | + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000 0 0x40>; + + camera@31 { + compatible = "imi,rdacm20"; + reg = <0x31>, <0x41>, <0x51>; + + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + }; + }; + + - | + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000 0 0x40>; + + camera@31 { + compatible = "imi,rdacm21"; + reg = <0x31>, <0x41>; + + port { + rdacm21_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index d3891386d671..f0f09a4c23ad 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -455,6 +455,8 @@ patternProperties: description: ILI Technology Corporation (ILITEK) "^img,.*": description: Imagination Technologies Ltd. + "^imi,.*": + description: Integrated Micro-Electronics Inc. "^incircuit,.*": description: In-Circuit GmbH "^inet-tek,.*": From patchwork Fri Jun 12 14:47:13 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Kieran Bingham X-Patchwork-Id: 11601741 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6C1AF913 for ; Fri, 12 Jun 2020 14:47:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 4D40620888 for ; Fri, 12 Jun 2020 14:47:33 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="MZcGukAB" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726591AbgFLOr2 (ORCPT ); Fri, 12 Jun 2020 10:47:28 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58702 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726572AbgFLOrZ (ORCPT ); Fri, 12 Jun 2020 10:47:25 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D71EAC03E96F; Fri, 12 Jun 2020 07:47:24 -0700 (PDT) Received: from Q.local (cpc89242-aztw30-2-0-cust488.18-1.cable.virginm.net [86.31.129.233]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 4B7F2D9F; Fri, 12 Jun 2020 16:47:22 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1591973243; bh=735Qs6KBTEzjeCXcp3aZtA+S9Qrlf3x8jX1L0VMsHBQ=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=MZcGukABG1uhy11wNQmFWZDlRNhzFNVeqtPz23J9DflzrgqUlAxXS0nHqDgIQRG6Y p0wUqr9aq4LNBDD8qZnFlJQf88HPJFEfiUgKbYhwcar3mw9vIHjV3hTKixiSXfWKoV K6il9yux2k8wkEb8u39kvBp4dJAOkqHodNdtnMGE= From: Kieran Bingham To: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Mauro Carvalho Chehab , sakari.ailus@iki.fi Cc: Kieran Bingham , Laurent Pinchart , Jacopo Mondi , =?utf-8?q?Niklas_S=C3=B6derlund?= , Hans Verkuil , Hyun Kwon , Manivannan Sadhasivam , Rob Herring , Linus Walleij , Jacopo Mondi , Laurent Pinchart , =?utf-8?q?Nik?= =?utf-8?q?las_S=C3=B6derlund?= , Kieran Bingham , Rob Herring Subject: [PATCH v10 4/4] media: i2c: Add RDACM20 driver Date: Fri, 12 Jun 2020 15:47:13 +0100 Message-Id: <20200612144713.502006-5-kieran.bingham+renesas@ideasonboard.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200612144713.502006-1-kieran.bingham+renesas@ideasonboard.com> References: <20200612144713.502006-1-kieran.bingham+renesas@ideasonboard.com> MIME-Version: 1.0 Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org From: Jacopo Mondi The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serializer. The GMSL link carries power, control (I2C) and video data over a single coax cable. Signed-off-by: Jacopo Mondi Signed-off-by: Laurent Pinchart Signed-off-by: Niklas Söderlund Signed-off-by: Kieran Bingham Reviewed-by: Rob Herring --- v2: - Fix MAINTAINERS entry v3: - Use new V4L2_MBUS_CSI2_DPHY bus type - Remove 'always zero' error print - Fix module description v5: - use sleep rather than busy loops for 10 ms delays - Return ov10635_set_regs directly - Use devm_kzalloc instead of kzalloc in probe() - Or in the flags: dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE - Ensure v4l2_ctrl_handler_free() is called - rdacm20_probe converted to use .probe_new and drop i2c device id tables - Remove rdacm20_g_mbus_config v7: - Use new i2c_new_dummy_device API v8: - Almost a new version, main changes are: - Split max9271 out - Rework bindings to yaml format and include forthcoming RDACM21 - Remove unecessary header file - Add pixel rate calculation - Drop unused fields and dead code - Rebase on media-master v5.7-rc1 - A detailed list of changes provided as fixup patches is avilable at git://jmondi.org/linux #gmsl/jmondi/media-master/max9286-v8+old-rdacm20+split which includes the following list of patches: squash!: rdacm20: Report pixel rate squash!: rdacm20: Force sensor ID re-read squash!: rdamc20: Check register programming result squash!: rdacm20: Update to use the new max9271 APIs squash!: rdacm20: Start with serial link disabled squash!: rdacm20: Hard reset the sensor squash!: rdacm20: Cache i2c addresses squash!: rdacm20: Adjust to use new max9271 API squash!: rdacm20: Drop unused format definition squash!: rdacm20: Refresh file header squash!: max9271: Add two functions to control addresses squash!: max9271: Do not rewrite i2c address squash!: max9271: Improve gpio handling squash!: max9271: Rework core functions squash!: max9271 refresh squash!: rdacm20: Update maintainers file squash!: rdacm20: Remove unsued/duplicated defines squash!: rdacm20: Remove header file squash!: rdacm20: Move content of header into C file squash!: rdacm20: Reorganize register table squash!: rdacm20: Fix subdevice flag creation squash!: rdacm20: Drop i2c id table squash!: rdacm20: Release control handler squash!: rdacm20: Better handle i2c dummy error squash!: rdacm20: Use devm_kzalloc squash!: rdacm20: Use probe_new() squash!: rdacm20: Drop deprecated g_mbus_config media: i2c: rdacm20: Break max9271 out from rdacm20 squash!: rdacm20: Rebase on latest media/maste media: i2c: Add RDACM20 driver dt-bindings: media: i2c: Add bindings for IMI RDACM2x v9: - Drop OV10635_FORMAT and use MEDIA_BUS_FMT_UYVY8_2X8 as suggested by Hans v10: - Use usleep_range over mdelay(10) MAINTAINERS | 12 + drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 2 + drivers/media/i2c/max9271.c | 341 ++++++++++++++++++ drivers/media/i2c/max9271.h | 224 ++++++++++++ drivers/media/i2c/rdacm20.c | 667 ++++++++++++++++++++++++++++++++++++ 6 files changed, 1259 insertions(+) create mode 100644 drivers/media/i2c/max9271.c create mode 100644 drivers/media/i2c/max9271.h create mode 100644 drivers/media/i2c/rdacm20.c diff --git a/MAINTAINERS b/MAINTAINERS index 7534df72033f..2cf9f33c9c74 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14216,6 +14216,18 @@ S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev F: tools/testing/selftests/rcutorture +RDACM20 Camera Sensor +M: Jacopo Mondi +M: Kieran Bingham +M: Laurent Pinchart +M: Niklas Söderlund +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml +F: drivers/media/i2c/rdacm20.c +F: drivers/media/i2c/max9271.c +F: drivers/media/i2c/max9271.h + RDC R-321X SoC M: Florian Fainelli S: Maintained diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 0a083407aa3e..9dd9fc1bb978 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -1170,6 +1170,19 @@ config VIDEO_NOON010PC30 source "drivers/media/i2c/m5mols/Kconfig" +config VIDEO_RDACM20 + tristate "IMI RDACM20 camera support" + depends on I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + select MEDIA_CONTROLLER + help + This driver supports the IMI RDACM20 GMSL camera, used in + ADAS systems. + + This camera should be used in conjunction with a GMSL + deserialiser such as the MAX9286. + config VIDEO_RJ54N1 tristate "Sharp RJ54N1CB0C sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index c8010d77e1a3..bfb9b4a03d0d 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -119,6 +119,8 @@ obj-$(CONFIG_VIDEO_IMX290) += imx290.o obj-$(CONFIG_VIDEO_IMX319) += imx319.o obj-$(CONFIG_VIDEO_IMX355) += imx355.o obj-$(CONFIG_VIDEO_MAX9286) += max9286.o +rdacm20-camera_module-objs := rdacm20.o max9271.o +obj-$(CONFIG_VIDEO_RDACM20) += rdacm20-camera_module.o obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o obj-$(CONFIG_SDR_MAX2175) += max2175.o diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c new file mode 100644 index 000000000000..0f6f7a092a46 --- /dev/null +++ b/drivers/media/i2c/max9271.c @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017-2020 Jacopo Mondi + * Copyright (C) 2017-2020 Kieran Bingham + * Copyright (C) 2017-2020 Laurent Pinchart + * Copyright (C) 2017-2020 Niklas Söderlund + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * This file exports functions to control the Maxim MAX9271 GMSL serializer + * chip. This is not a self-contained driver, as MAX9271 is usually embedded in + * camera modules with at least one image sensor and optional additional + * components, such as uController units or ISPs/DSPs. + * + * Drivers for the camera modules (i.e. rdacm20/21) are expected to use + * functions exported from this library driver to maximize code re-use. + */ + +#include +#include + +#include "max9271.h" + +static int max9271_read(struct max9271_device *dev, u8 reg) +{ + int ret; + + dev_dbg(&dev->client->dev, "%s(0x%02x)\n", __func__, reg); + + ret = i2c_smbus_read_byte_data(dev->client, reg); + if (ret < 0) + dev_dbg(&dev->client->dev, + "%s: register 0x%02x read failed (%d)\n", + __func__, reg, ret); + + return ret; +} + +static int max9271_write(struct max9271_device *dev, u8 reg, u8 val) +{ + int ret; + + dev_dbg(&dev->client->dev, "%s(0x%02x, 0x%02x)\n", __func__, reg, val); + + ret = i2c_smbus_write_byte_data(dev->client, reg, val); + if (ret < 0) + dev_err(&dev->client->dev, + "%s: register 0x%02x write failed (%d)\n", + __func__, reg, ret); + + return ret; +} + +/* + * max9271_pclk_detect() - Detect valid pixel clock from image sensor + * + * Wait up to 10ms for a valid pixel clock. + * + * Returns 0 for success, < 0 for pixel clock not properly detected + */ +static int max9271_pclk_detect(struct max9271_device *dev) +{ + unsigned int i; + int ret; + + for (i = 0; i < 100; i++) { + ret = max9271_read(dev, 0x15); + if (ret < 0) + return ret; + + if (ret & MAX9271_PCLKDET) + return 0; + + usleep_range(50, 100); + } + + dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n"); + + return -EIO; +} + +int max9271_set_serial_link(struct max9271_device *dev, bool enable) +{ + int ret; + u8 val = MAX9271_REVCCEN | MAX9271_FWDCCEN; + + if (enable) { + ret = max9271_pclk_detect(dev); + if (ret) + return ret; + + val |= MAX9271_SEREN; + } else { + val |= MAX9271_CLINKEN; + } + + /* + * The serializer temporarily disables the reverse control channel for + * 350µs after starting/stopping the forward serial link, but the + * deserializer synchronization time isn't clearly documented. + * + * According to the serializer datasheet we should wait 3ms, while + * according to the deserializer datasheet we should wait 5ms. + * + * Short delays here appear to show bit-errors in the writes following. + * Therefore a conservative delay seems best here. + */ + max9271_write(dev, 0x04, val); + usleep_range(5000, 8000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_set_serial_link); + +int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config) +{ + int ret; + + ret = max9271_write(dev, 0x0d, i2c_config); + if (ret) + return ret; + + /* The delay required after an I2C bus configuration change is not + * characterized in the serializer manual. Sleep up to 5msec to + * stay safe. + */ + usleep_range(3500, 5000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_configure_i2c); + +int max9271_set_high_threshold(struct max9271_device *dev, bool enable) +{ + int ret; + + ret = max9271_read(dev, 0x08); + if (ret < 0) + return ret; + + /* + * Enable or disable reverse channel high threshold to increase + * immunity to power supply noise. + */ + max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0)); + usleep_range(2000, 2500); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_set_high_threshold); + +int max9271_configure_gmsl_link(struct max9271_device *dev) +{ + /* + * Configure the GMSL link: + * + * - Double input mode, high data rate, 24-bit mode + * - Latch input data on PCLKIN rising edge + * - Enable HS/VS encoding + * - 1-bit parity error detection + * + * TODO: Make the GMSL link configuration parametric. + */ + max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN | + MAX9271_EDC_1BIT_PARITY); + usleep_range(5000, 8000); + + /* + * Adjust spread spectrum to +4% and auto-detect pixel clock + * and serial link rate. + */ + max9271_write(dev, 0x02, MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES | + MAX9271_PCLK_AUTODETECT | MAX9271_SERIAL_AUTODETECT); + usleep_range(5000, 8000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_configure_gmsl_link); + +int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask) +{ + int ret; + + ret = max9271_read(dev, 0x0f); + if (ret < 0) + return 0; + + ret |= gpio_mask; + ret = max9271_write(dev, 0x0f, ret); + if (ret < 0) { + dev_err(&dev->client->dev, "Failed to set gpio (%d)\n", ret); + return ret; + } + + usleep_range(3500, 5000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_set_gpios); + +int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask) +{ + int ret; + + ret = max9271_read(dev, 0x0f); + if (ret < 0) + return 0; + + ret &= ~gpio_mask; + ret = max9271_write(dev, 0x0f, ret); + if (ret < 0) { + dev_err(&dev->client->dev, "Failed to clear gpio (%d)\n", ret); + return ret; + } + + usleep_range(3500, 5000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_clear_gpios); + +int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask) +{ + int ret; + + ret = max9271_read(dev, 0x0f); + if (ret < 0) + return 0; + + /* BIT(0) reserved: GPO is always enabled. */ + ret |= gpio_mask | BIT(0); + ret = max9271_write(dev, 0x0e, ret); + if (ret < 0) { + dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret); + return ret; + } + + usleep_range(3500, 5000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_enable_gpios); + +int max9271_disable_gpios(struct max9271_device *dev, u8 gpio_mask) +{ + int ret; + + ret = max9271_read(dev, 0x0f); + if (ret < 0) + return 0; + + /* BIT(0) reserved: GPO cannot be disabled */ + ret &= (~gpio_mask | BIT(0)); + ret = max9271_write(dev, 0x0e, ret); + if (ret < 0) { + dev_err(&dev->client->dev, "Failed to disable gpio (%d)\n", ret); + return ret; + } + + usleep_range(3500, 5000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_disable_gpios); + +int max9271_verify_id(struct max9271_device *dev) +{ + int ret; + + ret = max9271_read(dev, 0x1e); + if (ret < 0) { + dev_err(&dev->client->dev, "MAX9271 ID read failed (%d)\n", + ret); + return ret; + } + + if (ret != MAX9271_ID) { + dev_err(&dev->client->dev, "MAX9271 ID mismatch (0x%02x)\n", + ret); + return -ENXIO; + } + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_verify_id); + +int max9271_set_address(struct max9271_device *dev, u8 addr) +{ + int ret; + + ret = max9271_write(dev, 0x00, addr << 1); + if (ret < 0) { + dev_err(&dev->client->dev, + "MAX9271 I2C address change failed (%d)\n", ret); + return ret; + } + usleep_range(3500, 5000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_set_address); + +int max9271_set_deserializer_address(struct max9271_device *dev, u8 addr) +{ + int ret; + + ret = max9271_write(dev, 0x01, addr << 1); + if (ret < 0) { + dev_err(&dev->client->dev, + "MAX9271 deserializer address set failed (%d)\n", ret); + return ret; + } + usleep_range(3500, 5000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_set_deserializer_address); + +int max9271_set_translation(struct max9271_device *dev, u8 source, u8 dest) +{ + int ret; + + ret = max9271_write(dev, 0x09, source << 1); + if (ret < 0) { + dev_err(&dev->client->dev, + "MAX9271 I2C translation setup failed (%d)\n", ret); + return ret; + } + usleep_range(3500, 5000); + + ret = max9271_write(dev, 0x0a, dest << 1); + if (ret < 0) { + dev_err(&dev->client->dev, + "MAX9271 I2C translation setup failed (%d)\n", ret); + return ret; + } + usleep_range(3500, 5000); + + return 0; +} +EXPORT_SYMBOL_GPL(max9271_set_translation); diff --git a/drivers/media/i2c/max9271.h b/drivers/media/i2c/max9271.h new file mode 100644 index 000000000000..d78fb21441e9 --- /dev/null +++ b/drivers/media/i2c/max9271.h @@ -0,0 +1,224 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2017-2020 Jacopo Mondi + * Copyright (C) 2017-2020 Kieran Bingham + * Copyright (C) 2017-2020 Laurent Pinchart + * Copyright (C) 2017-2020 Niklas Söderlund + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + */ + +#include + +#define MAX9271_DEFAULT_ADDR 0x40 + +/* Register 0x02 */ +#define MAX9271_SPREAD_SPECT_0 (0 << 5) +#define MAX9271_SPREAD_SPECT_05 (1 << 5) +#define MAX9271_SPREAD_SPECT_15 (2 << 5) +#define MAX9271_SPREAD_SPECT_1 (5 << 5) +#define MAX9271_SPREAD_SPECT_2 (3 << 5) +#define MAX9271_SPREAD_SPECT_3 (6 << 5) +#define MAX9271_SPREAD_SPECT_4 (7 << 5) +#define MAX9271_R02_RES BIT(4) +#define MAX9271_PCLK_AUTODETECT (3 << 2) +#define MAX9271_SERIAL_AUTODETECT (0x03) +/* Register 0x04 */ +#define MAX9271_SEREN BIT(7) +#define MAX9271_CLINKEN BIT(6) +#define MAX9271_PRBSEN BIT(5) +#define MAX9271_SLEEP BIT(4) +#define MAX9271_INTTYPE_I2C (0 << 2) +#define MAX9271_INTTYPE_UART (1 << 2) +#define MAX9271_INTTYPE_NONE (2 << 2) +#define MAX9271_REVCCEN BIT(1) +#define MAX9271_FWDCCEN BIT(0) +/* Register 0x07 */ +#define MAX9271_DBL BIT(7) +#define MAX9271_DRS BIT(6) +#define MAX9271_BWS BIT(5) +#define MAX9271_ES BIT(4) +#define MAX9271_HVEN BIT(2) +#define MAX9271_EDC_1BIT_PARITY (0 << 0) +#define MAX9271_EDC_6BIT_CRC (1 << 0) +#define MAX9271_EDC_6BIT_HAMMING (2 << 0) +/* Register 0x08 */ +#define MAX9271_INVVS BIT(7) +#define MAX9271_INVHS BIT(6) +#define MAX9271_REV_LOGAIN BIT(3) +#define MAX9271_REV_HIVTH BIT(0) +/* Register 0x09 */ +#define MAX9271_ID 0x09 +/* Register 0x0d */ +#define MAX9271_I2CLOCACK BIT(7) +#define MAX9271_I2CSLVSH_1046NS_469NS (3 << 5) +#define MAX9271_I2CSLVSH_938NS_352NS (2 << 5) +#define MAX9271_I2CSLVSH_469NS_234NS (1 << 5) +#define MAX9271_I2CSLVSH_352NS_117NS (0 << 5) +#define MAX9271_I2CMSTBT_837KBPS (7 << 2) +#define MAX9271_I2CMSTBT_533KBPS (6 << 2) +#define MAX9271_I2CMSTBT_339KBPS (5 << 2) +#define MAX9271_I2CMSTBT_173KBPS (4 << 2) +#define MAX9271_I2CMSTBT_105KBPS (3 << 2) +#define MAX9271_I2CMSTBT_84KBPS (2 << 2) +#define MAX9271_I2CMSTBT_28KBPS (1 << 2) +#define MAX9271_I2CMSTBT_8KBPS (0 << 2) +#define MAX9271_I2CSLVTO_NONE (3 << 0) +#define MAX9271_I2CSLVTO_1024US (2 << 0) +#define MAX9271_I2CSLVTO_256US (1 << 0) +#define MAX9271_I2CSLVTO_64US (0 << 0) +/* Register 0x0f */ +#define MAX9271_GPIO5OUT BIT(5) +#define MAX9271_GPIO4OUT BIT(4) +#define MAX9271_GPIO3OUT BIT(3) +#define MAX9271_GPIO2OUT BIT(2) +#define MAX9271_GPIO1OUT BIT(1) +#define MAX9271_GPO BIT(0) +/* Register 0x15 */ +#define MAX9271_PCLKDET BIT(0) + +/** + * struct max9271_device - max9271 device + * @client: The i2c client for the max9271 instance + */ +struct max9271_device { + struct i2c_client *client; +}; + +/** + * max9271_set_serial_link() - Enable/disable serial link + * @dev: The max9271 device + * @enable: Serial link enable/disable flag + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_serial_link(struct max9271_device *dev, bool enable); + +/** + * max9271_configure_i2c() - Configure I2C bus parameters + * @dev: The max9271 device + * @i2c_config: The I2C bus configuration bit mask + * + * Configure MAX9271 I2C interface. The bus configuration provided in the + * @i2c_config parameter shall be assembled using bit values defined by the + * MAX9271_I2C* macros. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config); + +/** + * max9271_set_high_threshold() - Enable or disable reverse channel high + * threshold + * @dev: The max9271 device + * @enable: High threshold enable/disable flag + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_high_threshold(struct max9271_device *dev, bool enable); + +/** + * max9271_configure_gmsl_link() - Configure the GMSL link + * @dev: The max9271 device + * + * FIXME: the GMSL link configuration is currently hardcoded and performed + * by programming registers 0x04, 0x07 and 0x02. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_configure_gmsl_link(struct max9271_device *dev); + +/** + * max9271_set_gpios() - Set gpio lines to physical high value + * @dev: The max9271 device + * @gpio_mask: The mask of gpio lines to set to high value + * + * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]* + * bit values. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask); + +/** + * max9271_clear_gpios() - Set gpio lines to physical low value + * @dev: The max9271 device + * @gpio_mask: The mask of gpio lines to set to low value + * + * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]* + * bit values. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask); + +/** + * max9271_enable_gpios() - Enable gpio lines + * @dev: The max9271 device + * @gpio_mask: The mask of gpio lines to enable + * + * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO* + * bit values. GPO line is always enabled by default. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask); + +/** + * max9271_disable_gpios() - Disable gpio lines + * @dev: The max9271 device + * @gpio_mask: The mask of gpio lines to disable + * + * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO* + * bit values. GPO line is always enabled by default and cannot be disabled. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_disable_gpios(struct max9271_device *dev, u8 gpio_mask); + +/** + * max9271_verify_id() - Read and verify MAX9271 id + * @dev: The max9271 device + * + * Return 0 on success or a negative error code on failure + */ +int max9271_verify_id(struct max9271_device *dev); + +/** + * max9271_set_address() - Program a new I2C address + * @dev: The max9271 device + * @addr: The new I2C address in 7-bit format + * + * This function only takes care of programming the new I2C address @addr to + * in the MAX9271 chip registers, it is responsiblity of the caller to set + * the i2c address client to the @addr value to be able to communicate with + * the MAX9271 chip using the I2C framework APIs after this function returns. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_address(struct max9271_device *dev, u8 addr); + +/** + * max9271_set_deserializer_address() - Program the remote deserializer address + * @dev: The max9271 device + * @addr: The deserializer I2C address in 7-bit format + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_deserializer_address(struct max9271_device *dev, u8 addr); + +/** + * max9271_set_translation() - Program I2C address translation + * @dev: The max9271 device + * @source: The I2C source address + * @dest: The I2C destination address + * + * Program address translation from @source to @dest. This is required to + * communicate with local devices that do not support address reprogramming. + * + * TODO: The device supports translation of two address, this function currently + * supports a single one. + * + * Return 0 on success or a negative error code on failure + */ +int max9271_set_translation(struct max9271_device *dev, u8 source, u8 dest); diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c new file mode 100644 index 000000000000..1ed928c4ca70 --- /dev/null +++ b/drivers/media/i2c/rdacm20.c @@ -0,0 +1,667 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IMI RDACM20 GMSL Camera Driver + * + * Copyright (C) 2017-2020 Jacopo Mondi + * Copyright (C) 2017-2020 Kieran Bingham + * Copyright (C) 2017-2019 Laurent Pinchart + * Copyright (C) 2017-2019 Niklas Söderlund + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2015 Cogent Embedded, Inc. + */ + +/* + * The camera is made of an Omnivision OV10635 sensor connected to a Maxim + * MAX9271 GMSL serializer. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "max9271.h" + +#define OV10635_I2C_ADDRESS 0x30 + +#define OV10635_SOFTWARE_RESET 0x0103 +#define OV10635_PID 0x300a +#define OV10635_VER 0x300b +#define OV10635_SC_CMMN_SCCB_ID 0x300c +#define OV10635_SC_CMMN_SCCB_ID_SELECT BIT(0) +#define OV10635_VERSION 0xa635 + +#define OV10635_WIDTH 1280 +#define OV10635_HEIGHT 800 + +/* VTS = PCLK / FPS / HTS / 2 (= 88MHz / 1572 / 30 / 2) */ +#define OV10635_HTS 1572 +/* FPS = 29,9998 */ +#define OV10635_VTS 933 + +/* + * As the drivers supports a single MEDIA_BUS_FMT_UYVY8_2X8 format we + * can harcode the pixel rate. + * + * PCLK is fed through the system clock, programmed @88MHz. + * MEDIA_BUS_FMT_UYVY8_2X8 format = 2 samples per pixel. + * + * Pixelrate = PCLK / 2 + * FPS = (OV10635_VTS * OV10635_HTS) / PixelRate + * = 29,9998 + */ +#define OV10635_PIXEL_RATE (44000000) + +static const struct ov10635_reg { + u16 reg; + u8 val; +} ov10635_regs_wizard[] = { + { 0x301b, 0xff }, { 0x301c, 0xff }, { 0x301a, 0xff }, { 0x3011, 0x42 }, + { 0x6900, 0x0c }, { 0x6901, 0x19 }, { 0x3503, 0x10 }, { 0x3025, 0x03 }, + { 0x3003, 0x16 }, { 0x3004, 0x30 }, { 0x3005, 0x40 }, { 0x3006, 0x91 }, + { 0x3600, 0x74 }, { 0x3601, 0x2b }, { 0x3612, 0x00 }, { 0x3611, 0x67 }, + { 0x3633, 0xca }, { 0x3602, 0xaf }, { 0x3603, 0x04 }, { 0x3630, 0x28 }, + { 0x3631, 0x16 }, { 0x3714, 0x10 }, { 0x371d, 0x01 }, { 0x4300, 0x3a }, + { 0x3007, 0x01 }, { 0x3024, 0x03 }, { 0x3020, 0x0a }, { 0x3702, 0x0d }, + { 0x3703, 0x20 }, { 0x3704, 0x15 }, { 0x3709, 0xa8 }, { 0x370c, 0xc7 }, + { 0x370d, 0x80 }, { 0x3712, 0x00 }, { 0x3713, 0x20 }, { 0x3715, 0x04 }, + { 0x381d, 0x40 }, { 0x381c, 0x00 }, { 0x3822, 0x50 }, { 0x3824, 0x10 }, + { 0x3815, 0x8c }, { 0x3804, 0x05 }, { 0x3805, 0x1f }, { 0x3800, 0x00 }, + { 0x3801, 0x00 }, { 0x3806, 0x03 }, { 0x3807, 0x28 }, { 0x3802, 0x00 }, + { 0x3803, 0x07 }, { 0x3808, 0x05 }, { 0x3809, 0x00 }, { 0x380a, 0x03 }, + { 0x380b, 0x20 }, { 0x380c, OV10635_HTS >> 8 }, + { 0x380d, OV10635_HTS & 0xff }, { 0x380e, OV10635_VTS >> 8 }, + { 0x380f, OV10635_VTS & 0xff }, { 0x3813, 0x02 }, { 0x3811, 0x08 }, + { 0x381f, 0x0c }, { 0x3819, 0x04 }, { 0x3804, 0x01 }, { 0x3805, 0x00 }, + { 0x3828, 0x03 }, { 0x3829, 0x10 }, { 0x382a, 0x10 }, { 0x3621, 0x63 }, + { 0x5005, 0x08 }, { 0x56d5, 0x00 }, { 0x56d6, 0x80 }, { 0x56d7, 0x00 }, + { 0x56d8, 0x00 }, { 0x56d9, 0x00 }, { 0x56da, 0x80 }, { 0x56db, 0x00 }, + { 0x56dc, 0x00 }, { 0x56e8, 0x00 }, { 0x56e9, 0x7f }, { 0x56ea, 0x00 }, + { 0x56eb, 0x7f }, { 0x5100, 0x00 }, { 0x5101, 0x80 }, { 0x5102, 0x00 }, + { 0x5103, 0x80 }, { 0x5104, 0x00 }, { 0x5105, 0x80 }, { 0x5106, 0x00 }, + { 0x5107, 0x80 }, { 0x5108, 0x00 }, { 0x5109, 0x00 }, { 0x510a, 0x00 }, + { 0x510b, 0x00 }, { 0x510c, 0x00 }, { 0x510d, 0x00 }, { 0x510e, 0x00 }, + { 0x510f, 0x00 }, { 0x5110, 0x00 }, { 0x5111, 0x80 }, { 0x5112, 0x00 }, + { 0x5113, 0x80 }, { 0x5114, 0x00 }, { 0x5115, 0x80 }, { 0x5116, 0x00 }, + { 0x5117, 0x80 }, { 0x5118, 0x00 }, { 0x5119, 0x00 }, { 0x511a, 0x00 }, + { 0x511b, 0x00 }, { 0x511c, 0x00 }, { 0x511d, 0x00 }, { 0x511e, 0x00 }, + { 0x511f, 0x00 }, { 0x56d0, 0x00 }, { 0x5006, 0x04 }, { 0x5608, 0x05 }, + { 0x52d7, 0x06 }, { 0x528d, 0x08 }, { 0x5293, 0x12 }, { 0x52d3, 0x12 }, + { 0x5288, 0x06 }, { 0x5289, 0x20 }, { 0x52c8, 0x06 }, { 0x52c9, 0x20 }, + { 0x52cd, 0x04 }, { 0x5381, 0x00 }, { 0x5382, 0xff }, { 0x5589, 0x76 }, + { 0x558a, 0x47 }, { 0x558b, 0xef }, { 0x558c, 0xc9 }, { 0x558d, 0x49 }, + { 0x558e, 0x30 }, { 0x558f, 0x67 }, { 0x5590, 0x3f }, { 0x5591, 0xf0 }, + { 0x5592, 0x10 }, { 0x55a2, 0x6d }, { 0x55a3, 0x55 }, { 0x55a4, 0xc3 }, + { 0x55a5, 0xb5 }, { 0x55a6, 0x43 }, { 0x55a7, 0x38 }, { 0x55a8, 0x5f }, + { 0x55a9, 0x4b }, { 0x55aa, 0xf0 }, { 0x55ab, 0x10 }, { 0x5581, 0x52 }, + { 0x5300, 0x01 }, { 0x5301, 0x00 }, { 0x5302, 0x00 }, { 0x5303, 0x0e }, + { 0x5304, 0x00 }, { 0x5305, 0x0e }, { 0x5306, 0x00 }, { 0x5307, 0x36 }, + { 0x5308, 0x00 }, { 0x5309, 0xd9 }, { 0x530a, 0x00 }, { 0x530b, 0x0f }, + { 0x530c, 0x00 }, { 0x530d, 0x2c }, { 0x530e, 0x00 }, { 0x530f, 0x59 }, + { 0x5310, 0x00 }, { 0x5311, 0x7b }, { 0x5312, 0x00 }, { 0x5313, 0x22 }, + { 0x5314, 0x00 }, { 0x5315, 0xd5 }, { 0x5316, 0x00 }, { 0x5317, 0x13 }, + { 0x5318, 0x00 }, { 0x5319, 0x18 }, { 0x531a, 0x00 }, { 0x531b, 0x26 }, + { 0x531c, 0x00 }, { 0x531d, 0xdc }, { 0x531e, 0x00 }, { 0x531f, 0x02 }, + { 0x5320, 0x00 }, { 0x5321, 0x24 }, { 0x5322, 0x00 }, { 0x5323, 0x56 }, + { 0x5324, 0x00 }, { 0x5325, 0x85 }, { 0x5326, 0x00 }, { 0x5327, 0x20 }, + { 0x5609, 0x01 }, { 0x560a, 0x40 }, { 0x560b, 0x01 }, { 0x560c, 0x40 }, + { 0x560d, 0x00 }, { 0x560e, 0xfa }, { 0x560f, 0x00 }, { 0x5610, 0xfa }, + { 0x5611, 0x02 }, { 0x5612, 0x80 }, { 0x5613, 0x02 }, { 0x5614, 0x80 }, + { 0x5615, 0x01 }, { 0x5616, 0x2c }, { 0x5617, 0x01 }, { 0x5618, 0x2c }, + { 0x563b, 0x01 }, { 0x563c, 0x01 }, { 0x563d, 0x01 }, { 0x563e, 0x01 }, + { 0x563f, 0x03 }, { 0x5640, 0x03 }, { 0x5641, 0x03 }, { 0x5642, 0x05 }, + { 0x5643, 0x09 }, { 0x5644, 0x05 }, { 0x5645, 0x05 }, { 0x5646, 0x05 }, + { 0x5647, 0x05 }, { 0x5651, 0x00 }, { 0x5652, 0x80 }, { 0x521a, 0x01 }, + { 0x521b, 0x03 }, { 0x521c, 0x06 }, { 0x521d, 0x0a }, { 0x521e, 0x0e }, + { 0x521f, 0x12 }, { 0x5220, 0x16 }, { 0x5223, 0x02 }, { 0x5225, 0x04 }, + { 0x5227, 0x08 }, { 0x5229, 0x0c }, { 0x522b, 0x12 }, { 0x522d, 0x18 }, + { 0x522f, 0x1e }, { 0x5241, 0x04 }, { 0x5242, 0x01 }, { 0x5243, 0x03 }, + { 0x5244, 0x06 }, { 0x5245, 0x0a }, { 0x5246, 0x0e }, { 0x5247, 0x12 }, + { 0x5248, 0x16 }, { 0x524a, 0x03 }, { 0x524c, 0x04 }, { 0x524e, 0x08 }, + { 0x5250, 0x0c }, { 0x5252, 0x12 }, { 0x5254, 0x18 }, { 0x5256, 0x1e }, + /* fifo_line_length = 2*hts */ + { 0x4606, (2 * OV10635_HTS) >> 8 }, { 0x4607, (2 * OV10635_HTS) & 0xff }, + /* fifo_hsync_start = 2*(hts - xres) */ + { 0x460a, (2 * (OV10635_HTS - OV10635_WIDTH)) >> 8 }, + { 0x460b, (2 * (OV10635_HTS - OV10635_WIDTH)) & 0xff }, + { 0x460c, 0x00 }, { 0x4620, 0x0e }, + /* BT601: 0x08 is also acceptable as HS/VS mode */ + { 0x4700, 0x04 }, { 0x4701, 0x00 }, { 0x4702, 0x01 }, { 0x4004, 0x04 }, + { 0x4005, 0x18 }, { 0x4001, 0x06 }, { 0x4050, 0x22 }, { 0x4051, 0x24 }, + { 0x4052, 0x02 }, { 0x4057, 0x9c }, { 0x405a, 0x00 }, { 0x4202, 0x02 }, + { 0x3023, 0x10 }, { 0x0100, 0x01 }, { 0x0100, 0x01 }, { 0x6f10, 0x07 }, + { 0x6f11, 0x82 }, { 0x6f12, 0x04 }, { 0x6f13, 0x00 }, { 0xd000, 0x19 }, + { 0xd001, 0xa0 }, { 0xd002, 0x00 }, { 0xd003, 0x01 }, { 0xd004, 0xa9 }, + { 0xd005, 0xad }, { 0xd006, 0x10 }, { 0xd007, 0x40 }, { 0xd008, 0x44 }, + { 0xd009, 0x00 }, { 0xd00a, 0x68 }, { 0xd00b, 0x00 }, { 0xd00c, 0x15 }, + { 0xd00d, 0x00 }, { 0xd00e, 0x00 }, { 0xd00f, 0x00 }, { 0xd040, 0x9c }, + { 0xd041, 0x21 }, { 0xd042, 0xff }, { 0xd043, 0xf8 }, { 0xd044, 0xd4 }, + { 0xd045, 0x01 }, { 0xd046, 0x48 }, { 0xd047, 0x00 }, { 0xd048, 0xd4 }, + { 0xd049, 0x01 }, { 0xd04a, 0x50 }, { 0xd04b, 0x04 }, { 0xd04c, 0x18 }, + { 0xd04d, 0x60 }, { 0xd04e, 0x00 }, { 0xd04f, 0x01 }, { 0xd050, 0xa8 }, + { 0xd051, 0x63 }, { 0xd052, 0x02 }, { 0xd053, 0xa4 }, { 0xd054, 0x85 }, + { 0xd055, 0x43 }, { 0xd056, 0x00 }, { 0xd057, 0x00 }, { 0xd058, 0x18 }, + { 0xd059, 0x60 }, { 0xd05a, 0x00 }, { 0xd05b, 0x01 }, { 0xd05c, 0xa8 }, + { 0xd05d, 0x63 }, { 0xd05e, 0x03 }, { 0xd05f, 0xf0 }, { 0xd060, 0x98 }, + { 0xd061, 0xa3 }, { 0xd062, 0x00 }, { 0xd063, 0x00 }, { 0xd064, 0x8c }, + { 0xd065, 0x6a }, { 0xd066, 0x00 }, { 0xd067, 0x6e }, { 0xd068, 0xe5 }, + { 0xd069, 0x85 }, { 0xd06a, 0x18 }, { 0xd06b, 0x00 }, { 0xd06c, 0x10 }, + { 0xd06d, 0x00 }, { 0xd06e, 0x00 }, { 0xd06f, 0x10 }, { 0xd070, 0x9c }, + { 0xd071, 0x80 }, { 0xd072, 0x00 }, { 0xd073, 0x03 }, { 0xd074, 0x18 }, + { 0xd075, 0x60 }, { 0xd076, 0x00 }, { 0xd077, 0x01 }, { 0xd078, 0xa8 }, + { 0xd079, 0x63 }, { 0xd07a, 0x07 }, { 0xd07b, 0x80 }, { 0xd07c, 0x07 }, + { 0xd07d, 0xff }, { 0xd07e, 0xf9 }, { 0xd07f, 0x03 }, { 0xd080, 0x8c }, + { 0xd081, 0x63 }, { 0xd082, 0x00 }, { 0xd083, 0x00 }, { 0xd084, 0xa5 }, + { 0xd085, 0x6b }, { 0xd086, 0x00 }, { 0xd087, 0xff }, { 0xd088, 0x18 }, + { 0xd089, 0x80 }, { 0xd08a, 0x00 }, { 0xd08b, 0x01 }, { 0xd08c, 0xa8 }, + { 0xd08d, 0x84 }, { 0xd08e, 0x01 }, { 0xd08f, 0x04 }, { 0xd090, 0xe1 }, + { 0xd091, 0x6b }, { 0xd092, 0x58 }, { 0xd093, 0x00 }, { 0xd094, 0x94 }, + { 0xd095, 0x6a }, { 0xd096, 0x00 }, { 0xd097, 0x70 }, { 0xd098, 0xe1 }, + { 0xd099, 0x6b }, { 0xd09a, 0x20 }, { 0xd09b, 0x00 }, { 0xd09c, 0x95 }, + { 0xd09d, 0x6b }, { 0xd09e, 0x00 }, { 0xd09f, 0x00 }, { 0xd0a0, 0xe4 }, + { 0xd0a1, 0x8b }, { 0xd0a2, 0x18 }, { 0xd0a3, 0x00 }, { 0xd0a4, 0x0c }, + { 0xd0a5, 0x00 }, { 0xd0a6, 0x00 }, { 0xd0a7, 0x23 }, { 0xd0a8, 0x15 }, + { 0xd0a9, 0x00 }, { 0xd0aa, 0x00 }, { 0xd0ab, 0x00 }, { 0xd0ac, 0x18 }, + { 0xd0ad, 0x60 }, { 0xd0ae, 0x80 }, { 0xd0af, 0x06 }, { 0xd0b0, 0xa8 }, + { 0xd0b1, 0x83 }, { 0xd0b2, 0x40 }, { 0xd0b3, 0x08 }, { 0xd0b4, 0xa8 }, + { 0xd0b5, 0xe3 }, { 0xd0b6, 0x38 }, { 0xd0b7, 0x2a }, { 0xd0b8, 0xa8 }, + { 0xd0b9, 0xc3 }, { 0xd0ba, 0x40 }, { 0xd0bb, 0x09 }, { 0xd0bc, 0xa8 }, + { 0xd0bd, 0xa3 }, { 0xd0be, 0x38 }, { 0xd0bf, 0x29 }, { 0xd0c0, 0x8c }, + { 0xd0c1, 0x65 }, { 0xd0c2, 0x00 }, { 0xd0c3, 0x00 }, { 0xd0c4, 0xd8 }, + { 0xd0c5, 0x04 }, { 0xd0c6, 0x18 }, { 0xd0c7, 0x00 }, { 0xd0c8, 0x8c }, + { 0xd0c9, 0x67 }, { 0xd0ca, 0x00 }, { 0xd0cb, 0x00 }, { 0xd0cc, 0xd8 }, + { 0xd0cd, 0x06 }, { 0xd0ce, 0x18 }, { 0xd0cf, 0x00 }, { 0xd0d0, 0x18 }, + { 0xd0d1, 0x60 }, { 0xd0d2, 0x80 }, { 0xd0d3, 0x06 }, { 0xd0d4, 0xa8 }, + { 0xd0d5, 0xe3 }, { 0xd0d6, 0x67 }, { 0xd0d7, 0x02 }, { 0xd0d8, 0xa9 }, + { 0xd0d9, 0x03 }, { 0xd0da, 0x67 }, { 0xd0db, 0x03 }, { 0xd0dc, 0xa8 }, + { 0xd0dd, 0xc3 }, { 0xd0de, 0x3d }, { 0xd0df, 0x05 }, { 0xd0e0, 0x8c }, + { 0xd0e1, 0x66 }, { 0xd0e2, 0x00 }, { 0xd0e3, 0x00 }, { 0xd0e4, 0xb8 }, + { 0xd0e5, 0x63 }, { 0xd0e6, 0x00 }, { 0xd0e7, 0x18 }, { 0xd0e8, 0xb8 }, + { 0xd0e9, 0x63 }, { 0xd0ea, 0x00 }, { 0xd0eb, 0x98 }, { 0xd0ec, 0xbc }, + { 0xd0ed, 0x03 }, { 0xd0ee, 0x00 }, { 0xd0ef, 0x00 }, { 0xd0f0, 0x10 }, + { 0xd0f1, 0x00 }, { 0xd0f2, 0x00 }, { 0xd0f3, 0x16 }, { 0xd0f4, 0xb8 }, + { 0xd0f5, 0x83 }, { 0xd0f6, 0x00 }, { 0xd0f7, 0x19 }, { 0xd0f8, 0x8c }, + { 0xd0f9, 0x67 }, { 0xd0fa, 0x00 }, { 0xd0fb, 0x00 }, { 0xd0fc, 0xb8 }, + { 0xd0fd, 0xa4 }, { 0xd0fe, 0x00 }, { 0xd0ff, 0x98 }, { 0xd100, 0xb8 }, + { 0xd101, 0x83 }, { 0xd102, 0x00 }, { 0xd103, 0x08 }, { 0xd104, 0x8c }, + { 0xd105, 0x68 }, { 0xd106, 0x00 }, { 0xd107, 0x00 }, { 0xd108, 0xe0 }, + { 0xd109, 0x63 }, { 0xd10a, 0x20 }, { 0xd10b, 0x04 }, { 0xd10c, 0xe0 }, + { 0xd10d, 0x65 }, { 0xd10e, 0x18 }, { 0xd10f, 0x00 }, { 0xd110, 0xa4 }, + { 0xd111, 0x83 }, { 0xd112, 0xff }, { 0xd113, 0xff }, { 0xd114, 0xb8 }, + { 0xd115, 0x64 }, { 0xd116, 0x00 }, { 0xd117, 0x48 }, { 0xd118, 0xd8 }, + { 0xd119, 0x07 }, { 0xd11a, 0x18 }, { 0xd11b, 0x00 }, { 0xd11c, 0xd8 }, + { 0xd11d, 0x08 }, { 0xd11e, 0x20 }, { 0xd11f, 0x00 }, { 0xd120, 0x9c }, + { 0xd121, 0x60 }, { 0xd122, 0x00 }, { 0xd123, 0x00 }, { 0xd124, 0xd8 }, + { 0xd125, 0x06 }, { 0xd126, 0x18 }, { 0xd127, 0x00 }, { 0xd128, 0x00 }, + { 0xd129, 0x00 }, { 0xd12a, 0x00 }, { 0xd12b, 0x08 }, { 0xd12c, 0x15 }, + { 0xd12d, 0x00 }, { 0xd12e, 0x00 }, { 0xd12f, 0x00 }, { 0xd130, 0x8c }, + { 0xd131, 0x6a }, { 0xd132, 0x00 }, { 0xd133, 0x76 }, { 0xd134, 0xbc }, + { 0xd135, 0x23 }, { 0xd136, 0x00 }, { 0xd137, 0x00 }, { 0xd138, 0x13 }, + { 0xd139, 0xff }, { 0xd13a, 0xff }, { 0xd13b, 0xe6 }, { 0xd13c, 0x18 }, + { 0xd13d, 0x60 }, { 0xd13e, 0x80 }, { 0xd13f, 0x06 }, { 0xd140, 0x03 }, + { 0xd141, 0xff }, { 0xd142, 0xff }, { 0xd143, 0xdd }, { 0xd144, 0xa8 }, + { 0xd145, 0x83 }, { 0xd146, 0x40 }, { 0xd147, 0x08 }, { 0xd148, 0x85 }, + { 0xd149, 0x21 }, { 0xd14a, 0x00 }, { 0xd14b, 0x00 }, { 0xd14c, 0x85 }, + { 0xd14d, 0x41 }, { 0xd14e, 0x00 }, { 0xd14f, 0x04 }, { 0xd150, 0x44 }, + { 0xd151, 0x00 }, { 0xd152, 0x48 }, { 0xd153, 0x00 }, { 0xd154, 0x9c }, + { 0xd155, 0x21 }, { 0xd156, 0x00 }, { 0xd157, 0x08 }, { 0x6f0e, 0x03 }, + { 0x6f0f, 0x00 }, { 0x460e, 0x08 }, { 0x460f, 0x01 }, { 0x4610, 0x00 }, + { 0x4611, 0x01 }, { 0x4612, 0x00 }, { 0x4613, 0x01 }, + /* 8 bits */ + { 0x4605, 0x08 }, + /* Swap data bits order [9:0] -> [0:9] */ + { 0x4709, 0x10 }, { 0x4608, 0x00 }, { 0x4609, 0x08 }, { 0x6804, 0x00 }, + { 0x6805, 0x06 }, { 0x6806, 0x00 }, { 0x5120, 0x00 }, { 0x3510, 0x00 }, + { 0x3504, 0x00 }, { 0x6800, 0x00 }, { 0x6f0d, 0x01 }, + /* PCLK falling edge */ + { 0x4708, 0x01 }, { 0x5000, 0xff }, { 0x5001, 0xbf }, { 0x5002, 0x7e }, + { 0x503d, 0x00 }, { 0xc450, 0x01 }, { 0xc452, 0x04 }, { 0xc453, 0x00 }, + { 0xc454, 0x00 }, { 0xc455, 0x01 }, { 0xc456, 0x01 }, { 0xc457, 0x00 }, + { 0xc458, 0x00 }, { 0xc459, 0x00 }, { 0xc45b, 0x00 }, { 0xc45c, 0x01 }, + { 0xc45d, 0x00 }, { 0xc45e, 0x00 }, { 0xc45f, 0x00 }, { 0xc460, 0x00 }, + { 0xc461, 0x01 }, { 0xc462, 0x01 }, { 0xc464, 0x03 }, { 0xc465, 0x00 }, + { 0xc466, 0x8a }, { 0xc467, 0x00 }, { 0xc468, 0x86 }, { 0xc469, 0x00 }, + { 0xc46a, 0x40 }, { 0xc46b, 0x50 }, { 0xc46c, 0x30 }, { 0xc46d, 0x28 }, + { 0xc46e, 0x60 }, { 0xc46f, 0x40 }, { 0xc47c, 0x01 }, { 0xc47d, 0x38 }, + { 0xc47e, 0x00 }, { 0xc47f, 0x00 }, { 0xc480, 0x00 }, { 0xc481, 0xff }, + { 0xc482, 0x00 }, { 0xc483, 0x40 }, { 0xc484, 0x00 }, { 0xc485, 0x18 }, + { 0xc486, 0x00 }, { 0xc487, 0x18 }, + { 0xc488, (OV10635_VTS - 8) * 16 >> 8}, + { 0xc489, (OV10635_VTS - 8) * 16 & 0xff}, + { 0xc48a, (OV10635_VTS - 8) * 16 >> 8}, + { 0xc48b, (OV10635_VTS - 8) * 16 & 0xff}, { 0xc48c, 0x00 }, + { 0xc48d, 0x04 }, { 0xc48e, 0x00 }, { 0xc48f, 0x04 }, { 0xc490, 0x03 }, + { 0xc492, 0x20 }, { 0xc493, 0x08 }, { 0xc498, 0x02 }, { 0xc499, 0x00 }, + { 0xc49a, 0x02 }, { 0xc49b, 0x00 }, { 0xc49c, 0x02 }, { 0xc49d, 0x00 }, + { 0xc49e, 0x02 }, { 0xc49f, 0x60 }, { 0xc4a0, 0x03 }, { 0xc4a1, 0x00 }, + { 0xc4a2, 0x04 }, { 0xc4a3, 0x00 }, { 0xc4a4, 0x00 }, { 0xc4a5, 0x10 }, + { 0xc4a6, 0x00 }, { 0xc4a7, 0x40 }, { 0xc4a8, 0x00 }, { 0xc4a9, 0x80 }, + { 0xc4aa, 0x0d }, { 0xc4ab, 0x00 }, { 0xc4ac, 0x0f }, { 0xc4ad, 0xc0 }, + { 0xc4b4, 0x01 }, { 0xc4b5, 0x01 }, { 0xc4b6, 0x00 }, { 0xc4b7, 0x01 }, + { 0xc4b8, 0x00 }, { 0xc4b9, 0x01 }, { 0xc4ba, 0x01 }, { 0xc4bb, 0x00 }, + { 0xc4bc, 0x01 }, { 0xc4bd, 0x60 }, { 0xc4be, 0x02 }, { 0xc4bf, 0x33 }, + { 0xc4c8, 0x03 }, { 0xc4c9, 0xd0 }, { 0xc4ca, 0x0e }, { 0xc4cb, 0x00 }, + { 0xc4cc, 0x0e }, { 0xc4cd, 0x51 }, { 0xc4ce, 0x0e }, { 0xc4cf, 0x51 }, + { 0xc4d0, 0x04 }, { 0xc4d1, 0x80 }, { 0xc4e0, 0x04 }, { 0xc4e1, 0x02 }, + { 0xc4e2, 0x01 }, { 0xc4e4, 0x10 }, { 0xc4e5, 0x20 }, { 0xc4e6, 0x30 }, + { 0xc4e7, 0x40 }, { 0xc4e8, 0x50 }, { 0xc4e9, 0x60 }, { 0xc4ea, 0x70 }, + { 0xc4eb, 0x80 }, { 0xc4ec, 0x90 }, { 0xc4ed, 0xa0 }, { 0xc4ee, 0xb0 }, + { 0xc4ef, 0xc0 }, { 0xc4f0, 0xd0 }, { 0xc4f1, 0xe0 }, { 0xc4f2, 0xf0 }, + { 0xc4f3, 0x80 }, { 0xc4f4, 0x00 }, { 0xc4f5, 0x20 }, { 0xc4f6, 0x02 }, + { 0xc4f7, 0x00 }, { 0xc4f8, 0x00 }, { 0xc4f9, 0x00 }, { 0xc4fa, 0x00 }, + { 0xc4fb, 0x01 }, { 0xc4fc, 0x01 }, { 0xc4fd, 0x00 }, { 0xc4fe, 0x04 }, + { 0xc4ff, 0x02 }, { 0xc500, 0x48 }, { 0xc501, 0x74 }, { 0xc502, 0x58 }, + { 0xc503, 0x80 }, { 0xc504, 0x05 }, { 0xc505, 0x80 }, { 0xc506, 0x03 }, + { 0xc507, 0x80 }, { 0xc508, 0x01 }, { 0xc509, 0xc0 }, { 0xc50a, 0x01 }, + { 0xc50b, 0xa0 }, { 0xc50c, 0x01 }, { 0xc50d, 0x2c }, { 0xc50e, 0x01 }, + { 0xc50f, 0x0a }, { 0xc510, 0x00 }, { 0xc511, 0x00 }, { 0xc512, 0xe5 }, + { 0xc513, 0x14 }, { 0xc514, 0x04 }, { 0xc515, 0x00 }, { 0xc518, OV10635_VTS >> 8}, + { 0xc519, OV10635_VTS & 0xff}, { 0xc51a, OV10635_HTS >> 8}, + { 0xc51b, OV10635_HTS & 0xff}, { 0xc2e0, 0x00 }, { 0xc2e1, 0x51 }, + { 0xc2e2, 0x00 }, { 0xc2e3, 0xd6 }, { 0xc2e4, 0x01 }, { 0xc2e5, 0x5e }, + { 0xc2e9, 0x01 }, { 0xc2ea, 0x7a }, { 0xc2eb, 0x90 }, { 0xc2ed, 0x00 }, + { 0xc2ee, 0x7a }, { 0xc2ef, 0x64 }, { 0xc308, 0x00 }, { 0xc309, 0x00 }, + { 0xc30a, 0x00 }, { 0xc30c, 0x00 }, { 0xc30d, 0x01 }, { 0xc30e, 0x00 }, + { 0xc30f, 0x00 }, { 0xc310, 0x01 }, { 0xc311, 0x60 }, { 0xc312, 0xff }, + { 0xc313, 0x08 }, { 0xc314, 0x01 }, { 0xc315, 0x00 }, { 0xc316, 0xff }, + { 0xc317, 0x0b }, { 0xc318, 0x00 }, { 0xc319, 0x0c }, { 0xc31a, 0x00 }, + { 0xc31b, 0xe0 }, { 0xc31c, 0x00 }, { 0xc31d, 0x14 }, { 0xc31e, 0x00 }, + { 0xc31f, 0xc5 }, { 0xc320, 0xff }, { 0xc321, 0x4b }, { 0xc322, 0xff }, + { 0xc323, 0xf0 }, { 0xc324, 0xff }, { 0xc325, 0xe8 }, { 0xc326, 0x00 }, + { 0xc327, 0x46 }, { 0xc328, 0xff }, { 0xc329, 0xd2 }, { 0xc32a, 0xff }, + { 0xc32b, 0xe4 }, { 0xc32c, 0xff }, { 0xc32d, 0xbb }, { 0xc32e, 0x00 }, + { 0xc32f, 0x61 }, { 0xc330, 0xff }, { 0xc331, 0xf9 }, { 0xc332, 0x00 }, + { 0xc333, 0xd9 }, { 0xc334, 0x00 }, { 0xc335, 0x2e }, { 0xc336, 0x00 }, + { 0xc337, 0xb1 }, { 0xc338, 0xff }, { 0xc339, 0x64 }, { 0xc33a, 0xff }, + { 0xc33b, 0xeb }, { 0xc33c, 0xff }, { 0xc33d, 0xe8 }, { 0xc33e, 0x00 }, + { 0xc33f, 0x48 }, { 0xc340, 0xff }, { 0xc341, 0xd0 }, { 0xc342, 0xff }, + { 0xc343, 0xed }, { 0xc344, 0xff }, { 0xc345, 0xad }, { 0xc346, 0x00 }, + { 0xc347, 0x66 }, { 0xc348, 0x01 }, { 0xc349, 0x00 }, { 0x6700, 0x04 }, + { 0x6701, 0x7b }, { 0x6702, 0xfd }, { 0x6703, 0xf9 }, { 0x6704, 0x3d }, + { 0x6705, 0x71 }, { 0x6706, 0x78 }, { 0x6708, 0x05 }, { 0x6f06, 0x6f }, + { 0x6f07, 0x00 }, { 0x6f0a, 0x6f }, { 0x6f0b, 0x00 }, { 0x6f00, 0x03 }, + { 0xc34c, 0x01 }, { 0xc34d, 0x00 }, { 0xc34e, 0x46 }, { 0xc34f, 0x55 }, + { 0xc350, 0x00 }, { 0xc351, 0x40 }, { 0xc352, 0x00 }, { 0xc353, 0xff }, + { 0xc354, 0x04 }, { 0xc355, 0x08 }, { 0xc356, 0x01 }, { 0xc357, 0xef }, + { 0xc358, 0x30 }, { 0xc359, 0x01 }, { 0xc35a, 0x64 }, { 0xc35b, 0x46 }, + { 0xc35c, 0x00 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, + { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, + { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, + { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, + { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, + { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, + { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0xc261, 0x01 }, + { 0x301b, 0xf0 }, { 0x301c, 0xf0 }, { 0x301a, 0xf0 }, { 0x6f00, 0xc3 }, + { 0xc46a, 0x30 }, { 0xc46d, 0x20 }, { 0xc464, 0x84 }, { 0xc465, 0x00 }, + { 0x6f00, 0x03 }, { 0x6f00, 0x43 }, { 0x381c, 0x00 }, { 0x381d, 0x40 }, + { 0xc454, 0x01 }, { 0x6f00, 0xc3 }, { 0xc454, 0x00 }, { 0xc4b1, 0x02 }, + { 0xc4b2, 0x01 }, { 0xc4b3, 0x03 }, { 0x6f00, 0x03 }, { 0x6f00, 0x43 }, + /* enable FSIN (FRAMESYNC input) functionality */ + { 0x3832, (0x0d + 2 * 0x20 + 0x15 + 38) >> 8 }, + { 0x3833, (0x0d + 2 * 0x20 + 0x15 + 38) & 0xff }, + { 0x3834, OV10635_VTS >> 8 }, { 0x3835, OV10635_VTS & 0xff }, + { 0x302e, 0x01 }, +}; + +struct rdacm20_device { + struct device *dev; + struct max9271_device *serializer; + struct i2c_client *sensor; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_ctrl_handler ctrls; + u32 addrs[2]; +}; + +static inline struct rdacm20_device *sd_to_rdacm20(struct v4l2_subdev *sd) +{ + return container_of(sd, struct rdacm20_device, sd); +} + +static inline struct rdacm20_device *i2c_to_rdacm20(struct i2c_client *client) +{ + return sd_to_rdacm20(i2c_get_clientdata(client)); +} + +static int ov10635_read16(struct rdacm20_device *dev, u16 reg) +{ + u8 buf[2] = { reg >> 8, reg & 0xff }; + int ret; + + ret = i2c_master_send(dev->sensor, buf, 2); + if (ret != 2) { + dev_dbg(dev->dev, "%s: register 0x%04x write failed (%d)\n", + __func__, reg, ret); + return ret; + } + + ret = i2c_master_recv(dev->sensor, buf, 2); + if (ret < 0) { + dev_dbg(dev->dev, "%s: register 0x%04x read failed (%d)\n", + __func__, reg, ret); + return ret; + } + + return (buf[0] << 8) | buf[1]; +} + +static int __ov10635_write(struct rdacm20_device *dev, u16 reg, u8 val) +{ + u8 buf[3] = { reg >> 8, reg & 0xff, val }; + int ret; + + dev_dbg(dev->dev, "%s(0x%04x, 0x%02x)\n", __func__, reg, val); + + ret = i2c_master_send(dev->sensor, buf, 3); + return ret < 0 ? ret : 0; +} + +static int ov10635_write(struct rdacm20_device *dev, u16 reg, u8 val) +{ + int ret; + + ret = __ov10635_write(dev, reg, val); + if (ret < 0) + dev_err(dev->dev, "%s: register 0x%04x write failed (%d)\n", + __func__, reg, ret); + + return ret; +} + +static int ov10635_set_regs(struct rdacm20_device *dev, + const struct ov10635_reg *regs, + unsigned int nr_regs) +{ + unsigned int i; + int ret; + + for (i = 0; i < nr_regs; i++) { + ret = __ov10635_write(dev, regs[i].reg, regs[i].val); + if (ret) { + dev_err(dev->dev, + "%s: register %u (0x%04x) write failed (%d)\n", + __func__, i, regs[i].reg, ret); + return ret; + } + } + + return 0; +} + +static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct rdacm20_device *dev = sd_to_rdacm20(sd); + + return max9271_set_serial_link(dev->serializer, enable); +} + +static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->pad || code->index > 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_UYVY8_2X8; + + return 0; +} + +static int rdacm20_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *mf = &format->format; + + if (format->pad) + return -EINVAL; + + mf->width = OV10635_WIDTH; + mf->height = OV10635_HEIGHT; + mf->code = MEDIA_BUS_FMT_UYVY8_2X8; + mf->colorspace = V4L2_COLORSPACE_RAW; + mf->field = V4L2_FIELD_NONE; + mf->ycbcr_enc = V4L2_YCBCR_ENC_601; + mf->quantization = V4L2_QUANTIZATION_FULL_RANGE; + mf->xfer_func = V4L2_XFER_FUNC_NONE; + + return 0; +} + +static struct v4l2_subdev_video_ops rdacm20_video_ops = { + .s_stream = rdacm20_s_stream, +}; + +static const struct v4l2_subdev_pad_ops rdacm20_subdev_pad_ops = { + .enum_mbus_code = rdacm20_enum_mbus_code, + .get_fmt = rdacm20_get_fmt, + .set_fmt = rdacm20_get_fmt, +}; + +static struct v4l2_subdev_ops rdacm20_subdev_ops = { + .video = &rdacm20_video_ops, + .pad = &rdacm20_subdev_pad_ops, +}; + +static int rdacm20_initialize(struct rdacm20_device *dev) +{ + unsigned int retry = 3; + int ret; + + /* Verify communication with the MAX9271: ping to wakeup. */ + dev->serializer->client->addr = MAX9271_DEFAULT_ADDR; + i2c_smbus_read_byte(dev->serializer->client); + + /* Serial link disabled during config as it needs a valid pixel clock. */ + ret = max9271_set_serial_link(dev->serializer, false); + if (ret) + return ret; + + /* + * Ensure that we have a good link configuration before attempting to + * identify the device. + */ + max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS | + MAX9271_I2CSLVTO_1024US | + MAX9271_I2CMSTBT_105KBPS); + + max9271_configure_gmsl_link(dev->serializer); + + ret = max9271_verify_id(dev->serializer); + if (ret < 0) + return ret; + + ret = max9271_set_address(dev->serializer, dev->addrs[0]); + if (ret < 0) + return ret; + dev->serializer->client->addr = dev->addrs[0]; + + /* + * Reset the sensor by cycling the OV10635 reset signal connected to the + * MAX9271 GPIO1 and verify communication with the OV10635. + */ + max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT); + usleep_range(10000, 15000); + max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT); + usleep_range(10000, 15000); + +again: + ret = ov10635_read16(dev, OV10635_PID); + if (ret < 0) { + if (retry--) + goto again; + + dev_err(dev->dev, "OV10635 ID read failed (%d)\n", + ret); + return -ENXIO; + } + + if (ret != OV10635_VERSION) { + if (retry--) + goto again; + + dev_err(dev->dev, "OV10635 ID mismatch (0x%04x)\n", + ret); + return -ENXIO; + } + + /* Change the sensor I2C address. */ + ret = ov10635_write(dev, OV10635_SC_CMMN_SCCB_ID, + (dev->addrs[1] << 1) | + OV10635_SC_CMMN_SCCB_ID_SELECT); + if (ret < 0) { + dev_err(dev->dev, + "OV10635 I2C address change failed (%d)\n", ret); + return ret; + } + dev->sensor->addr = dev->addrs[1]; + usleep_range(3500, 5000); + + /* Program the 0V10635 initial configuration. */ + ret = ov10635_set_regs(dev, ov10635_regs_wizard, + ARRAY_SIZE(ov10635_regs_wizard)); + if (ret) + return ret; + + dev_info(dev->dev, "Identified MAX9271 + OV10635 device\n"); + + return 0; +} + +static int rdacm20_probe(struct i2c_client *client) +{ + struct rdacm20_device *dev; + struct fwnode_handle *ep; + int ret; + + dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + dev->dev = &client->dev; + + dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer), + GFP_KERNEL); + if (!dev->serializer) + return -ENOMEM; + + dev->serializer->client = client; + + ret = of_property_read_u32_array(client->dev.of_node, "reg", + dev->addrs, 2); + if (ret < 0) { + dev_err(dev->dev, "Invalid DT reg property: %d\n", ret); + return -EINVAL; + } + + /* Create the dummy I2C client for the sensor. */ + dev->sensor = i2c_new_dummy_device(client->adapter, + OV10635_I2C_ADDRESS); + if (IS_ERR(dev->sensor)) { + ret = PTR_ERR(dev->sensor); + goto error; + } + + /* Initialize the hardware. */ + ret = rdacm20_initialize(dev); + if (ret < 0) + goto error; + + /* Initialize and register the subdevice. */ + v4l2_i2c_subdev_init(&dev->sd, client, &rdacm20_subdev_ops); + dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + v4l2_ctrl_handler_init(&dev->ctrls, 1); + v4l2_ctrl_new_std(&dev->ctrls, NULL, V4L2_CID_PIXEL_RATE, + OV10635_PIXEL_RATE, OV10635_PIXEL_RATE, 1, + OV10635_PIXEL_RATE); + dev->sd.ctrl_handler = &dev->ctrls; + + ret = dev->ctrls.error; + if (ret) + goto error_free_ctrls; + + dev->pad.flags = MEDIA_PAD_FL_SOURCE; + dev->sd.entity.flags |= MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad); + if (ret < 0) + goto error_free_ctrls; + + ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL); + if (!ep) { + dev_err(&client->dev, + "Unable to get endpoint in node %pOF\n", + client->dev.of_node); + ret = -ENOENT; + goto error_free_ctrls; + } + dev->sd.fwnode = ep; + + ret = v4l2_async_register_subdev(&dev->sd); + if (ret) + goto error_put_node; + + return 0; + +error_put_node: + fwnode_handle_put(ep); +error_free_ctrls: + v4l2_ctrl_handler_free(&dev->ctrls); +error: + media_entity_cleanup(&dev->sd.entity); + if (dev->sensor) + i2c_unregister_device(dev->sensor); + + dev_err(&client->dev, "probe failed\n"); + + return ret; +} + +static int rdacm20_remove(struct i2c_client *client) +{ + struct rdacm20_device *dev = i2c_to_rdacm20(client); + + fwnode_handle_put(dev->sd.fwnode); + v4l2_async_unregister_subdev(&dev->sd); + v4l2_ctrl_handler_free(&dev->ctrls); + media_entity_cleanup(&dev->sd.entity); + i2c_unregister_device(dev->sensor); + + return 0; +} + +static void rdacm20_shutdown(struct i2c_client *client) +{ + struct rdacm20_device *dev = i2c_to_rdacm20(client); + + /* make sure stream off during shutdown (reset/reboot) */ + rdacm20_s_stream(&dev->sd, 0); +} + +static const struct of_device_id rdacm20_of_ids[] = { + { .compatible = "imi,rdacm20", }, + { } +}; +MODULE_DEVICE_TABLE(of, rdacm20_of_ids); + +static struct i2c_driver rdacm20_i2c_driver = { + .driver = { + .name = "rdacm20", + .of_match_table = rdacm20_of_ids, + }, + .probe_new = rdacm20_probe, + .remove = rdacm20_remove, + .shutdown = rdacm20_shutdown, +}; + +module_i2c_driver(rdacm20_i2c_driver); + +MODULE_DESCRIPTION("GMSL Camera driver for RDACM20"); +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_LICENSE("GPL");