From patchwork Fri Jun 12 17:13:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602097 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id F092C1392 for ; Fri, 12 Jun 2020 17:14:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D926D20885 for ; Fri, 12 Jun 2020 17:14:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726568AbgFLROj (ORCPT ); Fri, 12 Jun 2020 13:14:39 -0400 Received: from mx2.suse.de ([195.135.220.15]:50472 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726302AbgFLRNp (ORCPT ); Fri, 12 Jun 2020 13:13:45 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id 86277AED8; Fri, 12 Jun 2020 17:13:47 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org, Ray Jui , Scott Branden , bcm-kernel-feedback-list@broadcom.com, Nicolas Saenz Julienne , Eric Anholt Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com, Rob Herring , devicetree@vger.kernel.org Subject: [PATCH v3 1/9] dt-bindings: reset: Add a binding for the RPi Firmware reset controller Date: Fri, 12 Jun 2020 19:13:25 +0200 Message-Id: <20200612171334.26385-2-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The firmware running on the RPi VideoCore can be used to reset and initialize HW controlled by the firmware. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Acked-by: Rob Herring --- Changes since v2: - Add include file for reset IDs Changes since v1: - Correct cells binding as per Florian's comment - Change compatible string to be more generic .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index b48ed875eb8e..23a885af3a28 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -39,6 +39,22 @@ properties: - compatible - "#clock-cells" + reset: + type: object + + properties: + compatible: + const: raspberrypi,firmware-reset + + "#reset-cells": + const: 1 + description: > + The argument is the ID of the firmware reset line to affect. + + required: + - compatible + - "#reset-cells" + additionalProperties: false required: @@ -55,5 +71,10 @@ examples: compatible = "raspberrypi,firmware-clocks"; #clock-cells = <1>; }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; }; ... diff --git a/include/dt-bindings/reset/raspberrypi,firmware-reset.h b/include/dt-bindings/reset/raspberrypi,firmware-reset.h new file mode 100644 index 000000000000..1a4f4c792723 --- /dev/null +++ b/include/dt-bindings/reset/raspberrypi,firmware-reset.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Nicolas Saenz Julienne + * Author: Nicolas Saenz Julienne + */ + +#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H +#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H + +#define RASPBERRYPI_FIRMWARE_RESET_ID_USB 0 +#define RASPBERRYPI_FIRMWARE_RESET_NUM_IDS 1 + +#endif From patchwork Fri Jun 12 17:13:26 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602091 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 16DA492A for ; Fri, 12 Jun 2020 17:14:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 076E42088E for ; Fri, 12 Jun 2020 17:14:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726341AbgFLRNs (ORCPT ); Fri, 12 Jun 2020 13:13:48 -0400 Received: from mx2.suse.de ([195.135.220.15]:50588 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726310AbgFLRNq (ORCPT ); Fri, 12 Jun 2020 13:13:46 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id B35A8AC64; Fri, 12 Jun 2020 17:13:48 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com, Nicolas Saenz Julienne Subject: [PATCH v3 2/9] reset: Add Raspberry Pi 4 firmware reset controller Date: Fri, 12 Jun 2020 19:13:26 +0200 Message-Id: <20200612171334.26385-3-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Raspberry Pi 4's co-processor controls some of the board's HW initialization process, but it's up to Linux to trigger it when relevant. Introduce a reset controller capable of interfacing with RPi4's co-processor that models these firmware initialization routines as reset lines. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Reviewed-by: Philipp Zabel --- Changes since v2: - Get ids from dt-binding Changes since v1: - Make the whole driver less USB centric as per Florian's comments drivers/reset/Kconfig | 11 +++ drivers/reset/Makefile | 1 + drivers/reset/reset-raspberrypi.c | 122 ++++++++++++++++++++++++++++++ 3 files changed, 134 insertions(+) create mode 100644 drivers/reset/reset-raspberrypi.c diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index d9efbfd29646..97e848740e13 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -140,6 +140,17 @@ config RESET_QCOM_PDC to control reset signals provided by PDC for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. +config RESET_RASPBERRYPI + tristate "Raspberry Pi 4 Firmware Reset Driver" + depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) + default USB_XHCI_PCI + help + Raspberry Pi 4's co-processor controls some of the board's HW + initialization process, but it's up to Linux to trigger it when + relevant. This driver provides a reset controller capable of + interfacing with RPi4's co-processor and model these firmware + initialization routines as reset lines. + config RESET_SCMI tristate "Reset driver controlled via ARM SCMI interface" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 249ed357c997..16947610cc3b 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o +obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o diff --git a/drivers/reset/reset-raspberrypi.c b/drivers/reset/reset-raspberrypi.c new file mode 100644 index 000000000000..91aa29f893b9 --- /dev/null +++ b/drivers/reset/reset-raspberrypi.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raspberry Pi 4 firmware reset driver + * + * Copyright (C) 2020 Nicolas Saenz Julienne + */ +#include +#include +#include +#include +#include +#include +#include +#include + +struct rpi_reset { + struct reset_controller_dev rcdev; + struct rpi_firmware *fw; +}; + +static inline struct rpi_reset *to_rpi(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct rpi_reset, rcdev); +} + +static int rpi_reset_reset(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct rpi_reset *priv = to_rpi(rcdev); + u32 dev_addr; + int ret; + + switch (id) { + case RASPBERRYPI_FIRMWARE_RESET_ID_USB: + /* + * The Raspberry Pi 4 gets its USB functionality from VL805, a + * PCIe chip that implements xHCI. After a PCI reset, VL805's + * firmware may either be loaded directly from an EEPROM or, if + * not present, by the SoC's co-processor, VideoCore. rpi's + * VideoCore OS contains both the non public firmware load + * logic and the VL805 firmware blob. This triggers the + * aforementioned process. + * + * The pci device address is expected is expected by the + * firmware encoded like this: + * + * PCI_BUS << 20 | PCI_SLOT << 15 | PCI_FUNC << 12 + * + * But since rpi's PCIe is hardwired, we know the address in + * advance. + */ + dev_addr = 0x100000; + ret = rpi_firmware_property(priv->fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, + &dev_addr, sizeof(dev_addr)); + if (ret) + return ret; + + /* Wait for vl805 to startup */ + usleep_range(200, 1000); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static const struct reset_control_ops rpi_reset_ops = { + .reset = rpi_reset_reset, +}; + +static int rpi_reset_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *fw_node; + struct rpi_firmware *fw; + struct rpi_reset *priv; + + fw_node = of_get_parent(dev->of_node); + if (!fw_node) { + dev_err(dev, "Missing firmware node\n"); + return -ENOENT; + } + + fw = rpi_firmware_get(fw_node); + of_node_put(fw_node); + if (!fw) + return -EPROBE_DEFER; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + + priv->fw = fw; + priv->rcdev.owner = THIS_MODULE; + priv->rcdev.nr_resets = RASPBERRYPI_FIRMWARE_RESET_NUM_IDS; + priv->rcdev.ops = &rpi_reset_ops; + priv->rcdev.of_node = dev->of_node; + + return devm_reset_controller_register(dev, &priv->rcdev); +} + +static const struct of_device_id rpi_reset_of_match[] = { + { .compatible = "raspberrypi,firmware-reset" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rpi_reset_of_match); + +static struct platform_driver rpi_reset_driver = { + .probe = rpi_reset_probe, + .driver = { + .name = "raspberrypi-reset", + .of_match_table = rpi_reset_of_match, + }, +}; +module_platform_driver(rpi_reset_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne "); +MODULE_DESCRIPTION("Raspberry Pi 4 firmware reset driver"); +MODULE_LICENSE("GPL"); From patchwork Fri Jun 12 17:13:27 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602089 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C3B191392 for ; Fri, 12 Jun 2020 17:14:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id AFEEE20882 for ; Fri, 12 Jun 2020 17:14:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726377AbgFLRNt (ORCPT ); Fri, 12 Jun 2020 13:13:49 -0400 Received: from mx2.suse.de ([195.135.220.15]:50668 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726327AbgFLRNs (ORCPT ); Fri, 12 Jun 2020 13:13:48 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id E04C2AEE5; Fri, 12 Jun 2020 17:13:49 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org, Rob Herring , Nicolas Saenz Julienne Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com, devicetree@vger.kernel.org Subject: [PATCH v3 3/9] ARM: dts: bcm2711: Add firmware usb reset node Date: Fri, 12 Jun 2020 19:13:27 +0200 Message-Id: <20200612171334.26385-4-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Now that the reset driver exposing Raspberry Pi 4's firmware based USB reset routine is available, let's add the device tree node exposing it. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli --- Changes since v1: - Update cell nr to match new bindings arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index c7f1d97e69bb..0cef95058fb0 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -83,6 +83,11 @@ expgpio: gpio { ""; status = "okay"; }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; }; &gpio { From patchwork Fri Jun 12 17:13:28 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602061 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0F13D13B1 for ; Fri, 12 Jun 2020 17:13:56 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E56EC208C3 for ; Fri, 12 Jun 2020 17:13:55 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726393AbgFLRNu (ORCPT ); Fri, 12 Jun 2020 13:13:50 -0400 Received: from mx2.suse.de ([195.135.220.15]:50718 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726349AbgFLRNt (ORCPT ); Fri, 12 Jun 2020 13:13:49 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id E31FFAF24; Fri, 12 Jun 2020 17:13:50 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org, Rob Herring , Nicolas Saenz Julienne Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com, devicetree@vger.kernel.org Subject: [PATCH v3 4/9] ARM: dts: bcm2711: Add reset controller to xHCI node Date: Fri, 12 Jun 2020 19:13:28 +0200 Message-Id: <20200612171334.26385-5-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The chip is hardwired to the board's PCIe bus and needs to be properly setup trough a firmware routine after a PCI fundamental reset. Pass the reset controller phandle that takes care of triggering the initialization to the relevant PCI device. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli --- Changes since v2: - Use dt-bindings to access IDs Changes since v1: - Update to match new binding arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 0cef95058fb0..e20979013414 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -4,6 +4,8 @@ #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" +#include + / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; model = "Raspberry Pi 4 Model B"; @@ -207,6 +209,13 @@ phy1: ethernet-phy@1 { }; }; +&pcie0 { + usb@1,0 { + reg = <0 0 0 0 0>; + resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>; + }; +}; + /* uart0 communicates with the BT module */ &uart0 { pinctrl-names = "default"; From patchwork Fri Jun 12 17:13:29 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602083 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id E17001392 for ; Fri, 12 Jun 2020 17:14:28 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C0B022088E for ; Fri, 12 Jun 2020 17:14:28 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726547AbgFLRO1 (ORCPT ); Fri, 12 Jun 2020 13:14:27 -0400 Received: from mx2.suse.de ([195.135.220.15]:50668 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726371AbgFLRNu (ORCPT ); Fri, 12 Jun 2020 13:13:50 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id B58D5AEF8; Fri, 12 Jun 2020 17:13:52 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org, Mathias Nyman Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com, Nicolas Saenz Julienne Subject: [PATCH v3 5/9] usb: xhci-pci: Add support for reset controllers Date: Fri, 12 Jun 2020 19:13:29 +0200 Message-Id: <20200612171334.26385-6-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Some atypical users of xhci-pci might need to manually reset their xHCI controller before starting the HCD setup. Check if a reset controller device is available to the PCI bus and trigger a reset. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Acked-by: Mathias Nyman Reviewed-by: Philipp Zabel --- Changes since v2: - Also reset on resume Changes since v1: - Use proper reset API - Make code simpler drivers/usb/host/xhci-pci.c | 10 ++++++++++ drivers/usb/host/xhci.h | 2 ++ 2 files changed, 12 insertions(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index ef513c2fb843..e76b9283faa3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "xhci.h" #include "xhci-trace.h" @@ -339,6 +340,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) struct xhci_hcd *xhci; struct usb_hcd *hcd; struct xhci_driver_data *driver_data; + struct reset_control *reset; driver_data = (struct xhci_driver_data *)id->driver_data; if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { @@ -347,6 +349,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; } + reset = devm_reset_control_get_optional_exclusive(&dev->bus->dev, NULL); + if (IS_ERR(reset)) + return PTR_ERR(reset); + reset_control_reset(reset); + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev); @@ -364,6 +371,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* USB 2.0 roothub is stored in the PCI device now. */ hcd = dev_get_drvdata(&dev->dev); xhci = hcd_to_xhci(hcd); + xhci->reset = reset; xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev, pci_name(dev), hcd); if (!xhci->shared_hcd) { @@ -515,6 +523,8 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = 0; + reset_control_reset(xhci->reset); + /* The BIOS on systems with the Intel Panther Point chipset may or may * not support xHCI natively. That means that during system resume, it * may switch the ports back to EHCI so that users can use their diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 2c6c4f8d1ee1..379ffa24877d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1770,6 +1770,8 @@ struct xhci_hcd { /* optional clocks */ struct clk *clk; struct clk *reg_clk; + /* optional reset controller */ + struct reset_control *reset; /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; From patchwork Fri Jun 12 17:13:30 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602065 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 354A692A for ; Fri, 12 Jun 2020 17:13:57 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 26849208B6 for ; Fri, 12 Jun 2020 17:13:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726450AbgFLRNz (ORCPT ); Fri, 12 Jun 2020 13:13:55 -0400 Received: from mx2.suse.de ([195.135.220.15]:50848 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726403AbgFLRNw (ORCPT ); Fri, 12 Jun 2020 13:13:52 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id C8207AAD0; Fri, 12 Jun 2020 17:13:54 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org, Mathias Nyman Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com, Nicolas Saenz Julienne Subject: [PATCH v3 6/9] Revert "USB: pci-quirks: Add Raspberry Pi 4 quirk" Date: Fri, 12 Jun 2020 19:13:30 +0200 Message-Id: <20200612171334.26385-7-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org This reverts commit c65822fef4adc0ba40c37a47337376ce75f7a7bc. The initialization of Raspberry Pi 4's USB chip is now handled through a reset controller. No need to directly call the firmware routine trough a pci quirk. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli --- drivers/firmware/Kconfig | 3 +-- drivers/usb/host/pci-quirks.c | 16 ---------------- 2 files changed, 1 insertion(+), 18 deletions(-) diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index fbd785dd0513..4843e94713a4 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -178,9 +178,8 @@ config ISCSI_IBFT Otherwise, say N. config RASPBERRYPI_FIRMWARE - bool "Raspberry Pi Firmware Driver" + tristate "Raspberry Pi Firmware Driver" depends on BCM2835_MBOX - default USB_PCI help This option enables support for communicating with the firmware on the Raspberry Pi. diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 0b949acfa258..92150ecdb036 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -16,9 +16,6 @@ #include #include #include - -#include - #include "pci-quirks.h" #include "xhci-ext-caps.h" @@ -1246,24 +1243,11 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) static void quirk_usb_early_handoff(struct pci_dev *pdev) { - int ret; - /* Skip Netlogic mips SoC's internal PCI USB controller. * This device does not need/support EHCI/OHCI handoff */ if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; - - if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { - ret = rpi_firmware_init_vl805(pdev); - if (ret) { - /* Firmware might be outdated, or something failed */ - dev_warn(&pdev->dev, - "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n", - ret); - } - } - if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && pdev->class != PCI_CLASS_SERIAL_USB_OHCI && pdev->class != PCI_CLASS_SERIAL_USB_EHCI && From patchwork Fri Jun 12 17:13:31 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602075 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id D30A91392 for ; Fri, 12 Jun 2020 17:14:18 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id BA28420885 for ; Fri, 12 Jun 2020 17:14:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726468AbgFLRN6 (ORCPT ); Fri, 12 Jun 2020 13:13:58 -0400 Received: from mx2.suse.de ([195.135.220.15]:50888 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726416AbgFLRNy (ORCPT ); Fri, 12 Jun 2020 13:13:54 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id BC500AED9; Fri, 12 Jun 2020 17:13:55 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org, Mathias Nyman Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com, Nicolas Saenz Julienne Subject: [PATCH v3 7/9] usb: host: pci-quirks: Bypass xHCI quirks for Raspberry Pi 4 Date: Fri, 12 Jun 2020 19:13:31 +0200 Message-Id: <20200612171334.26385-8-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The board doesn't need the quirks to be run, and takes care of its own initialization through a reset controller device. So let's bypass them. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli --- Changes since v2: - Correct reference counting on parent device node - Correct typos Changes since v1: - Correct typos drivers/usb/host/pci-quirks.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 92150ecdb036..977d0b6d7577 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -16,6 +16,8 @@ #include #include #include +#include + #include "pci-quirks.h" #include "xhci-ext-caps.h" @@ -1243,11 +1245,27 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) static void quirk_usb_early_handoff(struct pci_dev *pdev) { + struct device_node *parent; + bool is_rpi; + /* Skip Netlogic mips SoC's internal PCI USB controller. * This device does not need/support EHCI/OHCI handoff */ if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; + + /* + * Bypass the Raspberry Pi 4 controller xHCI controller, things are + * taken care of by the board's co-processor. + */ + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { + parent = of_get_parent(pdev->bus->dev.of_node); + is_rpi = of_device_is_compatible(parent, "brcm,bcm2711-pcie"); + of_node_put(parent); + if (is_rpi) + return; + } + if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && pdev->class != PCI_CLASS_SERIAL_USB_OHCI && pdev->class != PCI_CLASS_SERIAL_USB_EHCI && From patchwork Fri Jun 12 17:13:32 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602079 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6EBC492A for ; Fri, 12 Jun 2020 17:14:21 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5EFA620885 for ; Fri, 12 Jun 2020 17:14:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726379AbgFLROU (ORCPT ); Fri, 12 Jun 2020 13:14:20 -0400 Received: from mx2.suse.de ([195.135.220.15]:50944 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726442AbgFLRNz (ORCPT ); Fri, 12 Jun 2020 13:13:55 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id D5EBAAEE5; Fri, 12 Jun 2020 17:13:56 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org, Nicolas Saenz Julienne , Ray Jui , Scott Branden , bcm-kernel-feedback-list@broadcom.com Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, lorenzo.pieralisi@arm.com Subject: [PATCH v3 8/9] Revert "firmware: raspberrypi: Introduce vl805 init routine" Date: Fri, 12 Jun 2020 19:13:32 +0200 Message-Id: <20200612171334.26385-9-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org This reverts commit fbbc5ff3f7f9f4cad562e530ae2cf5d8964fe6d3. The vl805 init routine has moved into drivers/reset/reset-raspberrypi.c Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli --- drivers/firmware/raspberrypi.c | 61 ---------------------- include/soc/bcm2835/raspberrypi-firmware.h | 7 --- 2 files changed, 68 deletions(-) diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index ef8098856a47..a3e85186f8e6 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -12,8 +12,6 @@ #include #include #include -#include -#include #include #define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf)) @@ -21,8 +19,6 @@ #define MBOX_DATA28(msg) ((msg) & ~0xf) #define MBOX_CHAN_PROPERTY 8 -#define VL805_PCI_CONFIG_VERSION_OFFSET 0x50 - static struct platform_device *rpi_hwmon; static struct platform_device *rpi_clk; @@ -284,63 +280,6 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) } EXPORT_SYMBOL_GPL(rpi_firmware_get); -/* - * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that - * implements xHCI. After a PCI reset, VL805's firmware may either be loaded - * directly from an EEPROM or, if not present, by the SoC's co-processor, - * VideoCore. RPi4's VideoCore OS contains both the non public firmware load - * logic and the VL805 firmware blob. This function triggers the aforementioned - * process. - */ -int rpi_firmware_init_vl805(struct pci_dev *pdev) -{ - struct device_node *fw_np; - struct rpi_firmware *fw; - u32 dev_addr, version; - int ret; - - fw_np = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); - if (!fw_np) - return 0; - - fw = rpi_firmware_get(fw_np); - of_node_put(fw_np); - if (!fw) - return -ENODEV; - - /* - * Make sure we don't trigger a firmware load unnecessarily. - * - * If something went wrong with PCI, this whole exercise would be - * futile as VideoCore expects from us a configured PCI bus. Just take - * the faulty version (likely ~0) and let xHCI's registration fail - * further down the line. - */ - pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version); - if (version) - goto exit; - - dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | - PCI_FUNC(pdev->devfn) << 12; - - ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, - &dev_addr, sizeof(dev_addr)); - if (ret) - return ret; - - /* Wait for vl805 to startup */ - usleep_range(200, 1000); - - pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, - &version); -exit: - pci_info(pdev, "VL805 firmware version %08x\n", version); - - return 0; -} -EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); - static const struct of_device_id rpi_firmware_of_match[] = { { .compatible = "raspberrypi,bcm2835-firmware", }, {}, diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index 3025aca3c358..cc9cdbc66403 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -10,7 +10,6 @@ #include struct rpi_firmware; -struct pci_dev; enum rpi_firmware_property_status { RPI_FIRMWARE_STATUS_REQUEST = 0, @@ -142,7 +141,6 @@ int rpi_firmware_property(struct rpi_firmware *fw, int rpi_firmware_property_list(struct rpi_firmware *fw, void *data, size_t tag_size); struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); -int rpi_firmware_init_vl805(struct pci_dev *pdev); #else static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, void *data, size_t len) @@ -160,11 +158,6 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware { return NULL; } - -static inline int rpi_firmware_init_vl805(struct pci_dev *pdev) -{ - return 0; -} #endif #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */ From patchwork Fri Jun 12 17:13:33 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11602073 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C463792A for ; Fri, 12 Jun 2020 17:14:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B3FBC208B6 for ; Fri, 12 Jun 2020 17:14:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726478AbgFLRN7 (ORCPT ); Fri, 12 Jun 2020 13:13:59 -0400 Received: from mx2.suse.de ([195.135.220.15]:50982 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726448AbgFLRNz (ORCPT ); Fri, 12 Jun 2020 13:13:55 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id DC2AEAC64; Fri, 12 Jun 2020 17:13:57 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, p.zabel@pengutronix.de, linux-kernel@vger.kernel.org, Nicolas Saenz Julienne , Lorenzo Pieralisi , Rob Herring , bcm-kernel-feedback-list@broadcom.com Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, helgaas@kernel.org, andy.shevchenko@gmail.com, mathias.nyman@linux.intel.com, Bjorn Helgaas Subject: [PATCH v3 9/9] Revert "PCI: brcmstb: Wait for Raspberry Pi's firmware when present" Date: Fri, 12 Jun 2020 19:13:33 +0200 Message-Id: <20200612171334.26385-10-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200612171334.26385-1-nsaenzjulienne@suse.de> References: <20200612171334.26385-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org This reverts commit 44331189f9082c7e659697bbac1747db3def73e7. Now that the VL805 init routine is run through a reset controller driver the device dependencies are being taken care of by the device core. No need to do it manually here. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli --- drivers/pci/controller/pcie-brcmstb.c | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 7730ea845ff2..752f5b331579 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -28,8 +28,6 @@ #include #include -#include - #include "../pci.h" /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ @@ -931,26 +929,11 @@ static int brcm_pcie_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node, *msi_np; struct pci_host_bridge *bridge; - struct device_node *fw_np; struct brcm_pcie *pcie; struct pci_bus *child; struct resource *res; int ret; - /* - * We have to wait for Raspberry Pi's firmware interface to be up as a - * PCI fixup, rpi_firmware_init_vl805(), depends on it. This driver's - * probe can race with the firmware interface's (see - * drivers/firmware/raspberrypi.c) and potentially break the PCI fixup. - */ - fw_np = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); - if (fw_np && !rpi_firmware_get(fw_np)) { - of_node_put(fw_np); - return -EPROBE_DEFER; - } - of_node_put(fw_np); - bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); if (!bridge) return -ENOMEM;