From patchwork Wed Jun 24 07:21:52 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marius Zachmann X-Patchwork-Id: 11622437 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 411C5618 for ; Wed, 24 Jun 2020 07:22:48 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 30C1F207DD for ; Wed, 24 Jun 2020 07:22:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389688AbgFXHWr (ORCPT ); Wed, 24 Jun 2020 03:22:47 -0400 Received: from ms-10.1blu.de ([178.254.4.101]:60698 "EHLO ms-10.1blu.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389599AbgFXHWr (ORCPT ); Wed, 24 Jun 2020 03:22:47 -0400 Received: from [78.43.71.214] (helo=marius.fritz.box) by ms-10.1blu.de with esmtpsa (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.86_2) (envelope-from ) id 1jnzjx-0000VK-HP; Wed, 24 Jun 2020 09:22:37 +0200 From: Marius Zachmann To: Guenter Roeck , Jean Delvare , Jiri Kosina , Benjamin Tissoires Cc: Marius Zachmann , linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org Subject: [PATCH v4 1/3] input: add to hid_ignore_list Date: Wed, 24 Jun 2020 09:21:52 +0200 Message-Id: <20200624072154.22486-2-mail@mariuszachmann.de> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200624072154.22486-1-mail@mariuszachmann.de> References: <20200624072154.22486-1-mail@mariuszachmann.de> MIME-Version: 1.0 X-Con-Id: 241080 X-Con-U: 0-mail X-Originating-IP: 78.43.71.214 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Signed-off-by: Marius Zachmann --- drivers/hid/hid-quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index ca8b5c261c7c..7b7bc7737c53 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -699,6 +699,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x0c10) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x1d00) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI4713) }, { HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM109) }, From patchwork Wed Jun 24 07:21:53 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marius Zachmann X-Patchwork-Id: 11622443 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id DF48B1731 for ; Wed, 24 Jun 2020 07:23:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C7280207DD for ; Wed, 24 Jun 2020 07:23:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389724AbgFXHXC (ORCPT ); Wed, 24 Jun 2020 03:23:02 -0400 Received: from ms-10.1blu.de ([178.254.4.101]:60700 "EHLO ms-10.1blu.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389684AbgFXHWr (ORCPT ); Wed, 24 Jun 2020 03:22:47 -0400 Received: from [78.43.71.214] (helo=marius.fritz.box) by ms-10.1blu.de with esmtpsa (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.86_2) (envelope-from ) id 1jnzjy-0000VK-4y; Wed, 24 Jun 2020 09:22:38 +0200 From: Marius Zachmann To: Guenter Roeck , Jean Delvare , Jiri Kosina , Benjamin Tissoires Cc: Marius Zachmann , linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org Subject: [PATCH v4 2/3] hwmon: add Documentation Date: Wed, 24 Jun 2020 09:21:53 +0200 Message-Id: <20200624072154.22486-3-mail@mariuszachmann.de> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200624072154.22486-1-mail@mariuszachmann.de> References: <20200624072154.22486-1-mail@mariuszachmann.de> MIME-Version: 1.0 X-Con-Id: 241080 X-Con-U: 0-mail X-Originating-IP: 78.43.71.214 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Signed-off-by: Marius Zachmann --- Documentation/hwmon/corsair-cpro.rst | 40 ++++++++++++++++++++++++++++ Documentation/hwmon/index.rst | 1 + 2 files changed, 41 insertions(+) create mode 100644 Documentation/hwmon/corsair-cpro.rst diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst new file mode 100644 index 000000000000..2383c6f72115 --- /dev/null +++ b/Documentation/hwmon/corsair-cpro.rst @@ -0,0 +1,40 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver corsair-cpro +========================== + +Supported devices: + + * Corsair Commander Pro + * Corsair Commander Pro (1000D) + +Author: Marius Zachmann + +Description +----------- + +This driver implements the sysfs interface for the Corsair Commander Pro. +The Corsair Commander Pro is a USB device with 6 fan connectors, +4 temperature sensor connectors and 2 Corsair LED connectors. +It can read the voltage levels on the SATA power connector. + +Usage Notes +----------- + +Since it is a USB device, hotswapping is possible. The device is autodetected. + +Sysfs entries +------------- + +======================= ===================================================================== +in0_input Voltage on SATA 12v +in1_input Voltage on SATA 5v +in2_input Voltage on SATA 3.3v +temp[1-4]_input Temperature on connected temperature sensors +temp[1-4] label Shows "nc" after name, when not connected +fan[1-6]_input Connected fan rpm. +fan[1-6]_label Shows connection status of the fan as detected by the device. +pwm[1-6] Sets the fan speed. Values from 0-255. + When reading, it reports the last value if it was set by the driver. + Otherwise returns 0. +======================= ===================================================================== diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 55ff4b7c5349..750d3a975d82 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -47,6 +47,7 @@ Hardware Monitoring Kernel Drivers bel-pfe bt1-pvt coretemp + corsair-cpro da9052 da9055 dell-smm-hwmon From patchwork Wed Jun 24 07:21:54 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marius Zachmann X-Patchwork-Id: 11622439 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 90C3D6C1 for ; Wed, 24 Jun 2020 07:22:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 72DFD2073E for ; Wed, 24 Jun 2020 07:22:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389709AbgFXHWv (ORCPT ); Wed, 24 Jun 2020 03:22:51 -0400 Received: from ms-10.1blu.de ([178.254.4.101]:60722 "EHLO ms-10.1blu.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389686AbgFXHWt (ORCPT ); Wed, 24 Jun 2020 03:22:49 -0400 Received: from [78.43.71.214] (helo=marius.fritz.box) by ms-10.1blu.de with esmtpsa (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.86_2) (envelope-from ) id 1jnzjy-0000VK-Mi; Wed, 24 Jun 2020 09:22:39 +0200 From: Marius Zachmann To: Guenter Roeck , Jean Delvare , Jiri Kosina , Benjamin Tissoires Cc: Marius Zachmann , linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-input@vger.kernel.org Subject: [PATCH v4 3/3] hwmon: add driver Date: Wed, 24 Jun 2020 09:21:54 +0200 Message-Id: <20200624072154.22486-4-mail@mariuszachmann.de> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200624072154.22486-1-mail@mariuszachmann.de> References: <20200624072154.22486-1-mail@mariuszachmann.de> MIME-Version: 1.0 X-Con-Id: 241080 X-Con-U: 0-mail X-Originating-IP: 78.43.71.214 Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Signed-off-by: Marius Zachmann --- MAINTAINERS | 6 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/corsair-cpro.c | 489 +++++++++++++++++++++++++++++++++++ 4 files changed, 506 insertions(+) create mode 100644 drivers/hwmon/corsair-cpro.c diff --git a/MAINTAINERS b/MAINTAINERS index 68f21d46614c..188bebb06f04 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4400,6 +4400,12 @@ S: Maintained F: Documentation/hwmon/coretemp.rst F: drivers/hwmon/coretemp.c +CORSAIR-CPRO HARDWARE MONITOR DRIVER +M: Marius Zachmann +L: linux-hwmon@vger.kernel.org +S: Maintained +F: drivers/hwmon/corsair-cpro.c + COSA/SRP SYNC SERIAL DRIVER M: Jan "Yenya" Kasprzak S: Maintained diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 288ae9f63588..8b046a5dfa40 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -439,6 +439,16 @@ config SENSORS_BT1_PVT_ALARMS the data conversion will be periodically performed and the data will be saved in the internal driver cache. +config SENSORS_CORSAIR_CPRO + tristate "Corsair Commander Pro controller" + depends on USB + help + If you say yes here you get support for the Corsair Commander Pro + controller. + + This driver can also be built as a module. If so, the module + will be called corsair-cpro. + config SENSORS_DRIVETEMP tristate "Hard disk drives with temperature sensors" depends on SCSI && ATA diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3e32c21f5efe..18e1ef74ade7 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o obj-$(CONFIG_SENSORS_BT1_PVT) += bt1-pvt.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o +obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c new file mode 100644 index 000000000000..b07a42041187 --- /dev/null +++ b/drivers/hwmon/corsair-cpro.c @@ -0,0 +1,489 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * corsair-cpro.c - Linux driver for Corsair Commander Pro + * Copyright (C) 2020 Marius Zachmann + */ + +#include +#include +#include +#include +#include +#include + +#define USB_VENDOR_ID_CORSAIR 0x1b1c +#define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10 +#define USB_PRODUCT_ID_CORSAIR_1000D 0x1d00 + +#define OUT_BUFFER_SIZE 63 +#define IN_BUFFER_SIZE 16 +#define LABEL_LENGTH 12 + +#define CTL_GET_TMP_CNCT 0x10 /* + * returns in bytes 1-4 for each temp sensor: + * 0 not connected + * 1 connected + */ +#define CTL_GET_TMP 0x11 /* + * send: byte 1 is channel, rest zero + * rcv: returns temp for channel in bytes 1 and 2 + * returns 17 in byte 0 if no sensor is connected + */ +#define CTL_GET_VOLT 0x12 /* + * send: byte 1 is rail number: 0 = 12v, 1 = 5v, 2 = 3.3v + * rcv: returns volt in bytes 1,2 + */ +#define CTL_GET_FAN_CNCT 0x20 /* + * returns in bytes 1-6 for each fan: + * 0 not connected + * 1 3pin + * 2 4pin + */ +#define CTL_GET_FAN_RPM 0x21 /* + * send: byte 1 is channel, rest zero + * rcv: returns rpm in bytes 1,2 + */ +#define CTL_SET_FAN_FPWM 0x23 /* + * set fixed pwm + * send: byte 1 is fan number + * send: byte 2 is percentage from 0 - 100 + */ + +struct ccp_device { + struct usb_device *udev; + struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */ + u8 *buffer; + int pwm[6]; + char fan_label[6][LABEL_LENGTH]; + int temp_cnct[4]; + char temp_label[4][LABEL_LENGTH]; +}; + +/* send command, check for error in response, response in ccp->buffer */ +static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2) +{ + int actual_length; + int ret; + + memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE); + ccp->buffer[0] = command; + ccp->buffer[1] = byte1; + ccp->buffer[2] = byte2; + + ret = usb_bulk_msg(ccp->udev, usb_sndintpipe(ccp->udev, 2), ccp->buffer, OUT_BUFFER_SIZE, + &actual_length, 1000); + if (ret) { + dev_err(&ccp->udev->dev, "usb_bulk_msg send failed: %d", ret); + return ret; + } + + /* response needs to be received every time */ + ret = usb_bulk_msg(ccp->udev, usb_rcvintpipe(ccp->udev, 1), ccp->buffer, IN_BUFFER_SIZE, + &actual_length, 1000); + if (ret) { + dev_err(&ccp->udev->dev, "usb_bulk_msg receive failed: %d", ret); + return ret; + } + + /* first byte of response is error code */ + if (ccp->buffer[0] != 0x00) { + dev_err(&ccp->udev->dev, "device response error: %d", ccp->buffer[0]); + return -EIO; + } + + return 0; +} + +/* for commands, which return just a number depending on a channel: */ +static int get_data(struct ccp_device *ccp, int command, int channel, long *val) +{ + int ret; + + mutex_lock(&ccp->mutex); + + ret = send_usb_cmd(ccp, command, channel, 0); + if (ret) + goto exit; + + *val = (ccp->buffer[1] << 8) + ccp->buffer[2]; + +exit: + mutex_unlock(&ccp->mutex); + return ret; +} + +static int set_pwm(struct ccp_device *ccp, int channel, long val) +{ + int ret; + + if (val < 0 || val > 255) + return -EINVAL; + + ccp->pwm[channel] = val; + + /* The Corsair Commander Pro uses values from 0-100 */ + val = DIV_ROUND_CLOSEST(val * 100, 255); + + mutex_lock(&ccp->mutex); + + ret = send_usb_cmd(ccp, CTL_SET_FAN_FPWM, channel, val); + + mutex_unlock(&ccp->mutex); + return ret; +} + +/* read fan connection status and set labels */ +static int get_fan_cnct(struct ccp_device *ccp) +{ + int channel; + int mode; + int ret; + + mutex_lock(&ccp->mutex); + + ret = send_usb_cmd(ccp, CTL_GET_FAN_CNCT, 0, 0); + if (ret) + goto exit; + + for (channel = 0; channel < 6; channel++) { + mode = ccp->buffer[channel + 1]; + + switch (mode) { + case 0: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d nc", channel + 1); + break; + case 1: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d 3pin", channel + 1); + break; + case 2: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d 4pin", channel + 1); + break; + default: + scnprintf(ccp->fan_label[channel], LABEL_LENGTH, + "fan%d other", channel + 1); + break; + } + } + +exit: + mutex_unlock(&ccp->mutex); + return ret; +} + +/* read temp sensor connection status and set labels */ +static int get_temp_cnct(struct ccp_device *ccp) +{ + int channel; + int mode; + int ret; + + mutex_lock(&ccp->mutex); + + ret = send_usb_cmd(ccp, CTL_GET_TMP_CNCT, 0, 0); + if (ret) + goto exit; + + for (channel = 0; channel < 4; channel++) { + mode = ccp->buffer[channel + 1]; + ccp->temp_cnct[channel] = mode; + + switch (mode) { + case 0: + scnprintf(ccp->temp_label[channel], LABEL_LENGTH, + "temp%d nc", channel + 1); + break; + case 1: + scnprintf(ccp->temp_label[channel], LABEL_LENGTH, + "temp%d", channel + 1); + break; + default: + scnprintf(ccp->temp_label[channel], LABEL_LENGTH, + "temp%d other", channel + 1); + break; + } + } + +exit: + mutex_unlock(&ccp->mutex); + return ret; +} + +static int get_temp(struct ccp_device *ccp, int channel, long *val) +{ + int ret; + + if (ccp->temp_cnct[channel] != 1) + return -ENODATA; + + ret = get_data(ccp, CTL_GET_TMP, channel, val); + *val = *val * 10; + + return ret; +} + +static int ccp_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + int ret = 0; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_label: + *str = ccp->fan_label[channel]; + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_label: + *str = ccp->temp_label[channel]; + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +} + +static int ccp_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + int ret = 0; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + ret = get_temp(ccp, channel, val); + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + ret = get_data(ccp, CTL_GET_FAN_RPM, channel, val); + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + /* how to read pwm values from the device is currently unknown */ + /* driver returns last set value or 0 */ + *val = ccp->pwm[channel]; + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + ret = get_data(ccp, CTL_GET_VOLT, channel, val); + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +}; + +static int ccp_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct ccp_device *ccp = dev_get_drvdata(dev); + int ret = 0; + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + ret = set_pwm(ccp, channel, val); + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + default: + ret = -EOPNOTSUPP; + break; + } + + return ret; +}; + +static umode_t ccp_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + return 0444; + case hwmon_temp_label: + return 0444; + default: + break; + } + break; + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + return 0444; + case hwmon_fan_label: + return 0444; + default: + break; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return 0644; + default: + break; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_input: + return 0444; + default: + break; + } + break; + default: + break; + } + + return 0; +}; + +static const struct hwmon_ops ccp_hwmon_ops = { + .is_visible = ccp_is_visible, + .read = ccp_read, + .read_string = ccp_read_string, + .write = ccp_write, +}; + +static const struct hwmon_channel_info *ccp_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL, + HWMON_T_INPUT | HWMON_T_LABEL + ), + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL, + HWMON_F_INPUT | HWMON_F_LABEL + ), + HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT + ), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT, + HWMON_I_INPUT, + HWMON_I_INPUT + ), + NULL +}; + +static const struct hwmon_chip_info ccp_chip_info = { + .ops = &ccp_hwmon_ops, + .info = ccp_info, +}; + +static int ccp_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct device *hwmon_dev; + struct ccp_device *ccp; + int ret; + + ccp = devm_kzalloc(&intf->dev, sizeof(struct ccp_device), GFP_KERNEL); + if (!ccp) + return -ENOMEM; + + ccp->buffer = devm_kmalloc(&intf->dev, OUT_BUFFER_SIZE, GFP_KERNEL); + if (!ccp->buffer) + return -ENOMEM; + + mutex_init(&ccp->mutex); + + ccp->udev = interface_to_usbdev(intf); + + /* temp and fan connection status only updates, when device is powered on */ + ret = get_temp_cnct(ccp); + if (ret) + return ret; + + ret = get_fan_cnct(ccp); + if (ret) + return ret; + + hwmon_dev = devm_hwmon_device_register_with_info(&intf->dev, "corsaircpro", ccp, + &ccp_chip_info, 0); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static void ccp_disconnect(struct usb_interface *intf) +{ +} + +static const struct usb_device_id ccp_devices[] = { + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) }, + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) }, + { } +}; + +static struct usb_driver ccp_driver = { + .name = "corsair-cpro", + .probe = ccp_probe, + .disconnect = ccp_disconnect, + .id_table = ccp_devices +}; + +MODULE_DEVICE_TABLE(usb, ccp_devices); +MODULE_LICENSE("GPL"); + +module_usb_driver(ccp_driver);