From patchwork Thu Jul 23 12:06:19 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 11680757 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1C749913 for ; Thu, 23 Jul 2020 12:07:23 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 03315208E4 for ; Thu, 23 Jul 2020 12:07:23 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="lcMpuMp0" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728304AbgGWMGw (ORCPT ); Thu, 23 Jul 2020 08:06:52 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:47680 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1728134AbgGWMGv (ORCPT ); Thu, 23 Jul 2020 08:06:51 -0400 Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 06NC3EOc006531; Thu, 23 Jul 2020 14:06:36 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=STMicroelectronics; bh=E0OlX12Uh1E9X9WriKudw2kH7GGPXD0HUts6bxpjA8Y=; b=lcMpuMp0g3YP3uyvIOlMWW/JBxGV0lAwLKnWBEj5xIDiH8SBBlF+PUFSTOjOwLREIymx IrjlTTClaq1SOtZ12Sa+giNvMAQ7N9bkDAEviYkAxDrk13ixj9x2m7rn0FXSBBjW1NZc O+teh5j0wYk9qY2ywSCyQjqvj5IdTDmfdkR2GOf7M8rHwXADI9eeqEW4IInbW5cQSBJq Po1fvMruewISoCCnRC67pieJLRxGkgrXfejK/H9zmZahQkTkuXLId8OzhmNKcu0UMHpk +pXAenl/Y2BakNRrM0zueeMGzJLpVhAc1kBayjc1Ukx4ngIUCKCH8TvZVG2fmsWCz+OM vQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 32bsahakd0-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Jul 2020 14:06:36 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id E9ACA100034; Thu, 23 Jul 2020 14:06:35 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag3node2.st.com [10.75.127.8]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id D216B2AF314; Thu, 23 Jul 2020 14:06:35 +0200 (CEST) Received: from localhost (10.75.127.47) by SFHDAG3NODE2.st.com (10.75.127.8) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Thu, 23 Jul 2020 14:06:35 +0200 From: Amelie Delaunay To: Rob Herring , Greg Kroah-Hartman , Maxime Coquelin , Alexandre Torgue , Russell King , Heikki Krogerus CC: , , , , , Amelie Delaunay , Fabrice Gasnier Subject: [PATCH v2 1/6] dt-bindings: connector: add power-opmode optional property to usb-connector Date: Thu, 23 Jul 2020 14:06:19 +0200 Message-ID: <20200723120624.26291-2-amelie.delaunay@st.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200723120624.26291-1-amelie.delaunay@st.com> References: <20200723120624.26291-1-amelie.delaunay@st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.47] X-ClientProxiedBy: SFHDAG5NODE1.st.com (10.75.127.13) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.235,18.0.687 definitions=2020-07-23_05:2020-07-23,2020-07-23 signatures=0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Power operation mode may depends on hardware design, so, add the optional property power-opmode for usb-c connector to select the power operation mode capability. Signed-off-by: Amelie Delaunay --- Changes in v2: - Add description for possible operation current values --- .../bindings/connector/usb-connector.yaml | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index 9bd52e63c935..2fd85b9a7e1a 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -88,6 +88,26 @@ properties: - device - dual + power-opmode: + description: Determines the power operation mode that the Type C connector + will support and will advertise through CC pins. + - "default" corresponds to default USB voltage and current defined by the + USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and + 5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane + operation respectively. + - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB + Type-C Cable and Connector specification, when Power Delivery is not + supported. + - "usb_power_delivery" when Power Delivery is supported, as defined in + USB Power Delivery specification. + allOf: + - $ref: /schemas/types.yaml#definitions/string + enum: + - default + - 1.5A + - 3.0A + - usb_power_delivery + # The following are optional properties for "usb-c-connector" with power # delivery support. source-pdos: From patchwork Thu Jul 23 12:06:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 11680745 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 84242913 for ; Thu, 23 Jul 2020 12:07:00 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 6A82F22B43 for ; Thu, 23 Jul 2020 12:07:00 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="wbR1S5Lf" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728603AbgGWMGz (ORCPT ); Thu, 23 Jul 2020 08:06:55 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:47690 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1728147AbgGWMGx (ORCPT ); Thu, 23 Jul 2020 08:06:53 -0400 Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 06NC3Ev0006535; Thu, 23 Jul 2020 14:06:37 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=STMicroelectronics; bh=8C43QyHOLftUsfDVTeWAc7KU52Huh5OjUoVIJgaRBEI=; b=wbR1S5LfSkgiOfYQDjKgBZC7NocJglbCA92aqaA1hQW95m3wmZt31vXECkUUOw323AYi v7KCfVuNp7K+NH8TCkLfSitSC3TBWrVyBluQHK4w47vslSFSgUZ5F/dKZxFZt43ebFKQ WHVBclgzDCoB5o7oeFQf0EJWjE7xNF/1mXdM4O6PH95fwAlm6H1JIltLjXVGOyW/osDH VEcH2n/XdMXgNtc75zr8cOvGmAQoOUTvt/CwXSmjg27QCEhZ7havQdFJPmVpoqJ+Pxux wpoJhG28C3X+6kWSA2uHsddronlihTJ61TR/7r6bJr5MGBq80GvCdW9Hqz79Z9R4tnGX 5g== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 32bsahakd2-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Jul 2020 14:06:37 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 812FC10002A; Thu, 23 Jul 2020 14:06:36 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag3node2.st.com [10.75.127.8]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 705A42AF314; Thu, 23 Jul 2020 14:06:36 +0200 (CEST) Received: from localhost (10.75.127.45) by SFHDAG3NODE2.st.com (10.75.127.8) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Thu, 23 Jul 2020 14:06:36 +0200 From: Amelie Delaunay To: Rob Herring , Greg Kroah-Hartman , Maxime Coquelin , Alexandre Torgue , Russell King , Heikki Krogerus CC: , , , , , Amelie Delaunay , Fabrice Gasnier Subject: [PATCH v2 2/6] usb: typec: add typec_find_pwr_opmode Date: Thu, 23 Jul 2020 14:06:20 +0200 Message-ID: <20200723120624.26291-3-amelie.delaunay@st.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200723120624.26291-1-amelie.delaunay@st.com> References: <20200723120624.26291-1-amelie.delaunay@st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.45] X-ClientProxiedBy: SFHDAG3NODE1.st.com (10.75.127.7) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.235,18.0.687 definitions=2020-07-23_05:2020-07-23,2020-07-23 signatures=0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org This patch adds a function that converts power operation mode string into power operation mode value. It is useful to configure power operation mode through device tree property, as power capabilities may be linked to hardware design. Acked-by: Heikki Krogerus Signed-off-by: Amelie Delaunay --- No changes in v2. --- drivers/usb/typec/class.c | 15 +++++++++++++++ include/linux/usb/typec.h | 1 + 2 files changed, 16 insertions(+) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 02655694f200..35eec707cb51 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1448,6 +1448,21 @@ void typec_set_pwr_opmode(struct typec_port *port, } EXPORT_SYMBOL_GPL(typec_set_pwr_opmode); +/** + * typec_find_pwr_opmode - Get the typec power operation mode capability + * @name: power operation mode string + * + * This routine is used to find the typec_pwr_opmode by its string @name. + * + * Returns typec_pwr_opmode if success, otherwise negative error code. + */ +int typec_find_pwr_opmode(const char *name) +{ + return match_string(typec_pwr_opmodes, + ARRAY_SIZE(typec_pwr_opmodes), name); +} +EXPORT_SYMBOL_GPL(typec_find_pwr_opmode); + /** * typec_find_orientation - Convert orientation string to enum typec_orientation * @name: Orientation string diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index 9cb1bec94b71..6be558045942 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -268,6 +268,7 @@ int typec_set_mode(struct typec_port *port, int mode); void *typec_get_drvdata(struct typec_port *port); +int typec_find_pwr_opmode(const char *name); int typec_find_orientation(const char *name); int typec_find_port_power_role(const char *name); int typec_find_power_role(const char *name); From patchwork Thu Jul 23 12:06:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 11680749 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 59098913 for ; Thu, 23 Jul 2020 12:07:05 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 3F29F2086A for ; Thu, 23 Jul 2020 12:07:05 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="ljWt6mGX" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728647AbgGWMHC (ORCPT ); Thu, 23 Jul 2020 08:07:02 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:10228 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728442AbgGWMGy (ORCPT ); Thu, 23 Jul 2020 08:06:54 -0400 Received: from pps.filterd (m0046037.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 06NC5MUs007500; Thu, 23 Jul 2020 14:06:37 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=STMicroelectronics; bh=jmfCrpD7iRQhB8zV3oMdul3HfOkcvL9AiInxyBT3bBE=; b=ljWt6mGXU4+vg6Wo94hL5yBtQzmd7woqwBa2arwOAzFTTUlIGnaL+BwlEn/A2vBKMfVK kJTGmG8Z2/UTxbt95vtgdZ0vFMGpiYLb7cjBkX8oKnEgOujcpqPnEVUFaUUXDaFLzHPU laC5uicEcT7Chu0U0/Qxym+YaZb75NslfXf7ACgPyhQFf2gXYAMsPdfhUu7f+r70D6Bb ew4a5emlski6oLA02xMh0XhyjEUghGl0U1dm4PkJQ7+Ov9IkC3b4Ku60hs1QASDp0nik Arvnb7oFZjPDsZX+iF8blvEt0Qz0ZK33vbwyIeAv/XHp3wkKMXhqRsXSwun2vgntYsNq cA== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 32bs6vabmv-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Jul 2020 14:06:37 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 36DEE100038; Thu, 23 Jul 2020 14:06:37 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag3node2.st.com [10.75.127.8]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 25C312AF314; Thu, 23 Jul 2020 14:06:37 +0200 (CEST) Received: from localhost (10.75.127.44) by SFHDAG3NODE2.st.com (10.75.127.8) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Thu, 23 Jul 2020 14:06:36 +0200 From: Amelie Delaunay To: Rob Herring , Greg Kroah-Hartman , Maxime Coquelin , Alexandre Torgue , Russell King , Heikki Krogerus CC: , , , , , Amelie Delaunay , Fabrice Gasnier Subject: [PATCH v2 3/6] dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller Date: Thu, 23 Jul 2020 14:06:21 +0200 Message-ID: <20200723120624.26291-4-amelie.delaunay@st.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200723120624.26291-1-amelie.delaunay@st.com> References: <20200723120624.26291-1-amelie.delaunay@st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.44] X-ClientProxiedBy: SFHDAG4NODE2.st.com (10.75.127.11) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.235,18.0.687 definitions=2020-07-23_05:2020-07-23,2020-07-23 signatures=0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add binding documentation for the STMicroelectronics STUSB160x Type-C port controller. Signed-off-by: Amelie Delaunay --- No changes in v2. --- .../devicetree/bindings/usb/st,stusb160x.yaml | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml new file mode 100644 index 000000000000..12a996cd9405 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/st,stusb160x.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STUSB160x Type-C controller bindings + +maintainers: + - Amelie Delaunay + +properties: + compatible: + enum: + - st,stusb1600 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: main power supply (4.1V-22V) + + vsys-supply: + description: low power supply (3.0V-5.5V) + + vconn-supply: + description: power supply (2.7V-5.5V) used to supply VConn on CC pin in + source or dual power role + + connector: + type: object + + allOf: + - $ref: ../connector/usb-connector.yaml + + properties: + compatible: + const: usb-c-connector + + power-role: true + + power-opmode: true + + required: + - compatible + +required: + - compatible + - reg + - connector + +examples: + - | + #include + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + typec: stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + vdd-supply = <&vbus_drd>; + vsys-supply = <&vdd_usb>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + power-opmode = "default"; + data-role = "dual"; + + port { + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; +... From patchwork Thu Jul 23 12:06:22 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 11680753 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 088F1618 for ; Thu, 23 Jul 2020 12:07:12 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D5CA5208E4 for ; Thu, 23 Jul 2020 12:07:11 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="AVBX/Kc9" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728722AbgGWMHL (ORCPT ); Thu, 23 Jul 2020 08:07:11 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:10234 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728545AbgGWMHE (ORCPT ); Thu, 23 Jul 2020 08:07:04 -0400 Received: from pps.filterd (m0046037.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 06NC5JX1007450; Thu, 23 Jul 2020 14:06:38 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=STMicroelectronics; bh=gh8bNjWYQyL2EK7GwEFVzTxY3EGBallyxGziet9oNtE=; b=AVBX/Kc9VdyRj4xMfyRXFVVRXWrXvofOJKG7mL2G8vUNoOldI8/9gTbND0CD05s8TmY4 I4XPKfhJoW++CZF8ZnvGw0y5hKMHYGg6dXuBOcdaxCqpcxl5WbfI3fskgAAbIMx3WvNg 1GBvcW/Js5x9fx3TOrfU5QyfzxL2KgBYS4P1yNl/QxK8HuOMuvlWSB36gYjtdDAoIXwU bHkk11Xad7ZAMFN4Hkf+L9lDoF8FZQLPHtHL2BcT/hy1pOAtxifn3RPgO7y+7wQaVrgR JqMTfx1Zcs97My8hiswgm+A+HqJxvzZfwfLp96tden4zpxS6gZogRUbUMovvazvRxv5R fA== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 32bs6vabmy-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Jul 2020 14:06:38 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 0921B10002A; Thu, 23 Jul 2020 14:06:38 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag3node2.st.com [10.75.127.8]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id DE7A62AF314; Thu, 23 Jul 2020 14:06:37 +0200 (CEST) Received: from localhost (10.75.127.46) by SFHDAG3NODE2.st.com (10.75.127.8) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Thu, 23 Jul 2020 14:06:37 +0200 From: Amelie Delaunay To: Rob Herring , Greg Kroah-Hartman , Maxime Coquelin , Alexandre Torgue , Russell King , Heikki Krogerus CC: , , , , , Amelie Delaunay , Fabrice Gasnier Subject: [PATCH v2 4/6] usb: typec: add support for STUSB160x Type-C controller family Date: Thu, 23 Jul 2020 14:06:22 +0200 Message-ID: <20200723120624.26291-5-amelie.delaunay@st.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200723120624.26291-1-amelie.delaunay@st.com> References: <20200723120624.26291-1-amelie.delaunay@st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.46] X-ClientProxiedBy: SFHDAG2NODE2.st.com (10.75.127.5) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.235,18.0.687 definitions=2020-07-23_05:2020-07-23,2020-07-23 signatures=0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org STMicroelectronics USB Type-C port controllers use I2C interface to configure, control and read the operation status of the device. All ST USB Type-C port controllers are based on the same I2C register map. That's why this driver can be used with all ST USB Type-C ICs. Some ST USB Type-C port controllers are Dual Role Port (DRP), only Sink or Source, some supports USB Power Delivery. This can be configured through connector device tree bindings. This driver is a basic Type-C port controller driver, with no power delivery support. It allows to configure ST USB Type-C port controller. Interrupt is supported and enables CC connection events, to detect attach and detach and update Type-C subsystem accordingly as well as usb role switch. ST USB Type-C port controller can be supplied in three different ways depending on the target application: - through VDD pin only (so VDD is the main supply) - through VSYS pin only (so VSYS is the main supply) - through VDD and VSYS pins. When both VDD and VSYS power supplies are present, the low power supply VSYS is selected as main supply when VSYS voltage is above 3.1V, else VDD is selected as main supply. In case of Source or Dual port type, if VDD supply is present, it has to be enabled in case of Source power role to provide Vbus. When interrupt support is available, VDD supply is dynamically managed upon attach/detach interrupt. When there is no interrupt support, VDD supply is enabled by default. Acked-by: Heikki Krogerus Signed-off-by: Amelie Delaunay --- No changes in v2. --- drivers/usb/typec/Kconfig | 12 + drivers/usb/typec/Makefile | 1 + drivers/usb/typec/stusb160x.c | 875 ++++++++++++++++++++++++++++++++++ 3 files changed, 888 insertions(+) create mode 100644 drivers/usb/typec/stusb160x.c diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index 559dd06117e7..eee8536ae600 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -73,6 +73,18 @@ config TYPEC_TPS6598X If you choose to build this driver as a dynamically linked module, the module will be called tps6598x.ko. +config TYPEC_STUSB160X + tristate "STMicroelectronics STUSB160x Type-C controller driver" + depends on I2C + depends on REGMAP_I2C + depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH + help + Say Y or M here if your system has STMicroelectronics STUSB160x + Type-C port controller. + + If you choose to build this driver as a dynamically linked module, the + module will be called stusb160x.ko. + source "drivers/usb/typec/mux/Kconfig" source "drivers/usb/typec/altmodes/Kconfig" diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile index 7753a5c3cd46..671bc2d3cd6a 100644 --- a/drivers/usb/typec/Makefile +++ b/drivers/usb/typec/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_TYPEC_TCPM) += tcpm/ obj-$(CONFIG_TYPEC_UCSI) += ucsi/ obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o +obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o obj-$(CONFIG_TYPEC) += mux/ diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c new file mode 100644 index 000000000000..ce0bd7b3ad88 --- /dev/null +++ b/drivers/usb/typec/stusb160x.c @@ -0,0 +1,875 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STMicroelectronics STUSB160x Type-C controller family driver + * + * Copyright (C) 2020, STMicroelectronics + * Author(s): Amelie Delaunay + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STUSB160X_ALERT_STATUS 0x0B /* RC */ +#define STUSB160X_ALERT_STATUS_MASK_CTRL 0x0C /* RW */ +#define STUSB160X_CC_CONNECTION_STATUS_TRANS 0x0D /* RC */ +#define STUSB160X_CC_CONNECTION_STATUS 0x0E /* RO */ +#define STUSB160X_MONITORING_STATUS_TRANS 0x0F /* RC */ +#define STUSB160X_MONITORING_STATUS 0x10 /* RO */ +#define STUSB160X_CC_OPERATION_STATUS 0x11 /* RO */ +#define STUSB160X_HW_FAULT_STATUS_TRANS 0x12 /* RC */ +#define STUSB160X_HW_FAULT_STATUS 0x13 /* RO */ +#define STUSB160X_CC_CAPABILITY_CTRL 0x18 /* RW */ +#define STUSB160X_CC_VCONN_SWITCH_CTRL 0x1E /* RW */ +#define STUSB160X_VCONN_MONITORING_CTRL 0x20 /* RW */ +#define STUSB160X_VBUS_MONITORING_RANGE_CTRL 0x22 /* RW */ +#define STUSB160X_RESET_CTRL 0x23 /* RW */ +#define STUSB160X_VBUS_DISCHARGE_TIME_CTRL 0x25 /* RW */ +#define STUSB160X_VBUS_DISCHARGE_STATUS 0x26 /* RO */ +#define STUSB160X_VBUS_ENABLE_STATUS 0x27 /* RO */ +#define STUSB160X_CC_POWER_MODE_CTRL 0x28 /* RW */ +#define STUSB160X_VBUS_MONITORING_CTRL 0x2E /* RW */ +#define STUSB1600_REG_MAX 0x2F /* RO - Reserved */ + +/* STUSB160X_ALERT_STATUS/STUSB160X_ALERT_STATUS_MASK_CTRL bitfields */ +#define STUSB160X_HW_FAULT BIT(4) +#define STUSB160X_MONITORING BIT(5) +#define STUSB160X_CC_CONNECTION BIT(6) +#define STUSB160X_ALL_ALERTS GENMASK(6, 4) + +/* STUSB160X_CC_CONNECTION_STATUS_TRANS bitfields */ +#define STUSB160X_CC_ATTACH_TRANS BIT(0) + +/* STUSB160X_CC_CONNECTION_STATUS bitfields */ +#define STUSB160X_CC_ATTACH BIT(0) +#define STUSB160X_CC_VCONN_SUPPLY BIT(1) +#define STUSB160X_CC_DATA_ROLE(s) (!!((s) & BIT(2))) +#define STUSB160X_CC_POWER_ROLE(s) (!!((s) & BIT(3))) +#define STUSB160X_CC_ATTACHED_MODE GENMASK(7, 5) + +/* STUSB160X_MONITORING_STATUS_TRANS bitfields */ +#define STUSB160X_VCONN_PRESENCE_TRANS BIT(0) +#define STUSB160X_VBUS_PRESENCE_TRANS BIT(1) +#define STUSB160X_VBUS_VSAFE0V_TRANS BIT(2) +#define STUSB160X_VBUS_VALID_TRANS BIT(3) + +/* STUSB160X_MONITORING_STATUS bitfields */ +#define STUSB160X_VCONN_PRESENCE BIT(0) +#define STUSB160X_VBUS_PRESENCE BIT(1) +#define STUSB160X_VBUS_VSAFE0V BIT(2) +#define STUSB160X_VBUS_VALID BIT(3) + +/* STUSB160X_CC_OPERATION_STATUS bitfields */ +#define STUSB160X_TYPEC_FSM_STATE GENMASK(4, 0) +#define STUSB160X_SINK_POWER_STATE GENMASK(6, 5) +#define STUSB160X_CC_ATTACHED BIT(7) + +/* STUSB160X_HW_FAULT_STATUS_TRANS bitfields */ +#define STUSB160X_VCONN_SW_OVP_FAULT_TRANS BIT(0) +#define STUSB160X_VCONN_SW_OCP_FAULT_TRANS BIT(1) +#define STUSB160X_VCONN_SW_RVP_FAULT_TRANS BIT(2) +#define STUSB160X_VPU_VALID_TRANS BIT(4) +#define STUSB160X_VPU_OVP_FAULT_TRANS BIT(5) +#define STUSB160X_THERMAL_FAULT BIT(7) + +/* STUSB160X_HW_FAULT_STATUS bitfields */ +#define STUSB160X_VCONN_SW_OVP_FAULT_CC2 BIT(0) +#define STUSB160X_VCONN_SW_OVP_FAULT_CC1 BIT(1) +#define STUSB160X_VCONN_SW_OCP_FAULT_CC2 BIT(2) +#define STUSB160X_VCONN_SW_OCP_FAULT_CC1 BIT(3) +#define STUSB160X_VCONN_SW_RVP_FAULT_CC2 BIT(4) +#define STUSB160X_VCONN_SW_RVP_FAULT_CC1 BIT(5) +#define STUSB160X_VPU_VALID BIT(6) +#define STUSB160X_VPU_OVP_FAULT BIT(7) + +/* STUSB160X_CC_CAPABILITY_CTRL bitfields */ +#define STUSB160X_CC_VCONN_SUPPLY_EN BIT(0) +#define STUSB160X_CC_VCONN_DISCHARGE_EN BIT(4) +#define STUSB160X_CC_CURRENT_ADVERTISED GENMASK(7, 6) + +/* STUSB160X_VCONN_SWITCH_CTRL bitfields */ +#define STUSB160X_CC_VCONN_SWITCH_ILIM GENMASK(3, 0) + +/* STUSB160X_VCONN_MONITORING_CTRL bitfields */ +#define STUSB160X_VCONN_UVLO_THRESHOLD BIT(6) +#define STUSB160X_VCONN_MONITORING_EN BIT(7) + +/* STUSB160X_VBUS_MONITORING_RANGE_CTRL bitfields */ +#define STUSB160X_SHIFT_LOW_VBUS_LIMIT GENMASK(3, 0) +#define STUSB160X_SHIFT_HIGH_VBUS_LIMIT GENMASK(7, 4) + +/* STUSB160X_RESET_CTRL bitfields */ +#define STUSB160X_SW_RESET_EN BIT(0) + +/* STUSB160X_VBUS_DISCHARGE_TIME_CTRL bitfields */ +#define STUSBXX02_VBUS_DISCHARGE_TIME_TO_PDO GENMASK(3, 0) +#define STUSB160X_VBUS_DISCHARGE_TIME_TO_0V GENMASK(7, 4) + +/* STUSB160X_VBUS_DISCHARGE_STATUS bitfields */ +#define STUSB160X_VBUS_DISCHARGE_EN BIT(7) + +/* STUSB160X_VBUS_ENABLE_STATUS bitfields */ +#define STUSB160X_VBUS_SOURCE_EN BIT(0) +#define STUSB160X_VBUS_SINK_EN BIT(1) + +/* STUSB160X_CC_POWER_MODE_CTRL bitfields */ +#define STUSB160X_CC_POWER_MODE GENMASK(2, 0) + +/* STUSB160X_VBUS_MONITORING_CTRL bitfields */ +#define STUSB160X_VDD_UVLO_DISABLE BIT(0) +#define STUSB160X_VBUS_VSAFE0V_THRESHOLD GENMASK(2, 1) +#define STUSB160X_VBUS_RANGE_DISABLE BIT(4) +#define STUSB160X_VDD_OVLO_DISABLE BIT(6) + +enum stusb160x_pwr_mode { + SOURCE_WITH_ACCESSORY, + SINK_WITH_ACCESSORY, + SINK_WITHOUT_ACCESSORY, + DUAL_WITH_ACCESSORY, + DUAL_WITH_ACCESSORY_AND_TRY_SRC, + DUAL_WITH_ACCESSORY_AND_TRY_SNK, +}; + +enum stusb160x_attached_mode { + NO_DEVICE_ATTACHED, + SINK_ATTACHED, + SOURCE_ATTACHED, + DEBUG_ACCESSORY_ATTACHED, + AUDIO_ACCESSORY_ATTACHED, +}; + +struct stusb160x { + struct device *dev; + struct regmap *regmap; + struct regulator *vdd_supply; + struct regulator *vsys_supply; + struct regulator *vconn_supply; + struct regulator *main_supply; + + struct typec_port *port; + struct typec_capability capability; + struct typec_partner *partner; + + enum typec_port_type port_type; + enum typec_pwr_opmode pwr_opmode; + bool vbus_on; + + struct usb_role_switch *role_sw; +}; + +static bool stusb160x_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS_MASK_CTRL: + case STUSB160X_CC_CAPABILITY_CTRL: + case STUSB160X_CC_VCONN_SWITCH_CTRL: + case STUSB160X_VCONN_MONITORING_CTRL: + case STUSB160X_VBUS_MONITORING_RANGE_CTRL: + case STUSB160X_RESET_CTRL: + case STUSB160X_VBUS_DISCHARGE_TIME_CTRL: + case STUSB160X_CC_POWER_MODE_CTRL: + case STUSB160X_VBUS_MONITORING_CTRL: + return true; + default: + return false; + } +} + +static bool stusb160x_reg_readable(struct device *dev, unsigned int reg) +{ + if (reg <= 0x0A || + (reg >= 0x14 && reg <= 0x17) || + (reg >= 0x19 && reg <= 0x1D) || + (reg >= 0x29 && reg <= 0x2D) || + (reg == 0x1F || reg == 0x21 || reg == 0x24 || reg == 0x2F)) + return false; + else + return true; +} + +static bool stusb160x_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS: + case STUSB160X_CC_CONNECTION_STATUS_TRANS: + case STUSB160X_CC_CONNECTION_STATUS: + case STUSB160X_MONITORING_STATUS_TRANS: + case STUSB160X_MONITORING_STATUS: + case STUSB160X_CC_OPERATION_STATUS: + case STUSB160X_HW_FAULT_STATUS_TRANS: + case STUSB160X_HW_FAULT_STATUS: + case STUSB160X_VBUS_DISCHARGE_STATUS: + case STUSB160X_VBUS_ENABLE_STATUS: + return true; + default: + return false; + } +} + +static bool stusb160x_reg_precious(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STUSB160X_ALERT_STATUS: + case STUSB160X_CC_CONNECTION_STATUS_TRANS: + case STUSB160X_MONITORING_STATUS_TRANS: + case STUSB160X_HW_FAULT_STATUS_TRANS: + return true; + default: + return false; + } +} + +static const struct regmap_config stusb1600_regmap_config = { + .reg_bits = 8, + .reg_stride = 1, + .val_bits = 8, + .max_register = STUSB1600_REG_MAX, + .writeable_reg = stusb160x_reg_writeable, + .readable_reg = stusb160x_reg_readable, + .volatile_reg = stusb160x_reg_volatile, + .precious_reg = stusb160x_reg_precious, + .cache_type = REGCACHE_RBTREE, +}; + +static bool stusb160x_get_vconn(struct stusb160x *chip) +{ + u32 val; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val); + if (ret) { + dev_err(chip->dev, "Unable to get Vconn status: %d\n", ret); + return false; + } + + return !!FIELD_GET(STUSB160X_CC_VCONN_SUPPLY_EN, val); +} + +static int stusb160x_set_vconn(struct stusb160x *chip, bool on) +{ + int ret; + + /* Manage VCONN input supply */ + if (chip->vconn_supply) { + if (on) { + ret = regulator_enable(chip->vconn_supply); + if (ret) { + dev_err(chip->dev, + "failed to enable vconn supply: %d\n", + ret); + return ret; + } + } else { + regulator_disable(chip->vconn_supply); + } + } + + /* Manage VCONN monitoring and power path */ + ret = regmap_update_bits(chip->regmap, STUSB160X_VCONN_MONITORING_CTRL, + STUSB160X_VCONN_MONITORING_EN, + on ? STUSB160X_VCONN_MONITORING_EN : 0); + if (ret) + goto vconn_reg_disable; + + return 0; + +vconn_reg_disable: + if (chip->vconn_supply && on) + regulator_disable(chip->vconn_supply); + + return ret; +} + +static enum typec_pwr_opmode stusb160x_get_pwr_opmode(struct stusb160x *chip) +{ + u32 val; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, &val); + if (ret) { + dev_err(chip->dev, "Unable to get pwr opmode: %d\n", ret); + return TYPEC_PWR_MODE_USB; + } + + return FIELD_GET(STUSB160X_CC_CURRENT_ADVERTISED, val); +} + +static enum typec_accessory stusb160x_get_accessory(u32 status) +{ + enum stusb160x_attached_mode mode; + + mode = FIELD_GET(STUSB160X_CC_ATTACHED_MODE, status); + + switch (mode) { + case DEBUG_ACCESSORY_ATTACHED: + return TYPEC_ACCESSORY_DEBUG; + case AUDIO_ACCESSORY_ATTACHED: + return TYPEC_ACCESSORY_AUDIO; + default: + return TYPEC_ACCESSORY_NONE; + } +} + +static enum typec_role stusb160x_get_vconn_role(u32 status) +{ + if (FIELD_GET(STUSB160X_CC_VCONN_SUPPLY, status)) + return TYPEC_SOURCE; + + return TYPEC_SINK; +} + +static void stusb160x_set_data_role(struct stusb160x *chip, + enum typec_data_role data_role, + bool attached) +{ + enum usb_role usb_role = USB_ROLE_NONE; + + if (attached) { + if (data_role == TYPEC_HOST) + usb_role = USB_ROLE_HOST; + else + usb_role = USB_ROLE_DEVICE; + } + + usb_role_switch_set_role(chip->role_sw, usb_role); + typec_set_data_role(chip->port, data_role); +} + +static int stusb160x_attach(struct stusb160x *chip, u32 status) +{ + struct typec_partner_desc desc; + int ret; + + if ((STUSB160X_CC_POWER_ROLE(status) == TYPEC_SOURCE) && + chip->vdd_supply) { + ret = regulator_enable(chip->vdd_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable Vbus supply: %d\n", ret); + return ret; + } + chip->vbus_on = true; + } + + desc.usb_pd = false; + desc.accessory = stusb160x_get_accessory(status); + desc.identity = NULL; + + chip->partner = typec_register_partner(chip->port, &desc); + if (IS_ERR(chip->partner)) { + ret = PTR_ERR(chip->partner); + goto vbus_disable; + } + + typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status)); + typec_set_pwr_opmode(chip->port, stusb160x_get_pwr_opmode(chip)); + typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status)); + stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), true); + + return 0; + +vbus_disable: + if (chip->vbus_on) { + regulator_disable(chip->vdd_supply); + chip->vbus_on = false; + } + + return ret; +} + +static void stusb160x_detach(struct stusb160x *chip, u32 status) +{ + typec_unregister_partner(chip->partner); + chip->partner = NULL; + + typec_set_pwr_role(chip->port, STUSB160X_CC_POWER_ROLE(status)); + typec_set_pwr_opmode(chip->port, TYPEC_PWR_MODE_USB); + typec_set_vconn_role(chip->port, stusb160x_get_vconn_role(status)); + stusb160x_set_data_role(chip, STUSB160X_CC_DATA_ROLE(status), false); + + if (chip->vbus_on) { + regulator_disable(chip->vdd_supply); + chip->vbus_on = false; + } +} + +static irqreturn_t stusb160x_irq_handler(int irq, void *data) +{ + struct stusb160x *chip = data; + u32 pending, trans, status; + int ret; + + ret = regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &pending); + if (ret) + goto err; + + if (pending & STUSB160X_CC_CONNECTION) { + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS_TRANS, &trans); + if (ret) + goto err; + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + goto err; + + if (trans & STUSB160X_CC_ATTACH_TRANS) { + if (status & STUSB160X_CC_ATTACH) { + ret = stusb160x_attach(chip, status); + if (ret) + goto err; + } else { + stusb160x_detach(chip, status); + } + } + } +err: + return IRQ_HANDLED; +} + +static int stusb160x_irq_init(struct stusb160x *chip, int irq) +{ + u32 status; + int ret; + + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + return ret; + + if (status & STUSB160X_CC_ATTACH) { + ret = stusb160x_attach(chip, status); + if (ret) + dev_err(chip->dev, "attach failed: %d\n", ret); + } + + ret = devm_request_threaded_irq(chip->dev, irq, NULL, + stusb160x_irq_handler, IRQF_ONESHOT, + dev_name(chip->dev), chip); + if (ret) + goto partner_unregister; + + /* Unmask CC_CONNECTION events */ + ret = regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_CC_CONNECTION, 0); + if (ret) + goto partner_unregister; + + return 0; + +partner_unregister: + if (chip->partner) { + typec_unregister_partner(chip->partner); + chip->partner = NULL; + } + + return ret; +} + +static int stusb160x_chip_init(struct stusb160x *chip) +{ + u32 val; + int ret; + + /* Change the default Type-C power mode */ + if (chip->port_type == TYPEC_PORT_SRC) + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + SOURCE_WITH_ACCESSORY); + else if (chip->port_type == TYPEC_PORT_SNK) + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + SINK_WITH_ACCESSORY); + else /* (chip->port_type == TYPEC_PORT_DRP) */ + ret = regmap_update_bits(chip->regmap, + STUSB160X_CC_POWER_MODE_CTRL, + STUSB160X_CC_POWER_MODE, + DUAL_WITH_ACCESSORY); + if (ret) + return ret; + + if (chip->port_type == TYPEC_PORT_SNK) + goto skip_src; + + /* Change the default Type-C Source power operation mode capability */ + ret = regmap_update_bits(chip->regmap, STUSB160X_CC_CAPABILITY_CTRL, + STUSB160X_CC_CURRENT_ADVERTISED, + FIELD_PREP(STUSB160X_CC_CURRENT_ADVERTISED, + chip->pwr_opmode)); + if (ret) + return ret; + + /* Manage Type-C Source Vconn supply */ + if (stusb160x_get_vconn(chip)) { + ret = stusb160x_set_vconn(chip, true); + if (ret) + return ret; + } + +skip_src: + /* Mask all events interrupts - to be unmasked with interrupt support */ + ret = regmap_update_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS); + if (ret) + return ret; + + /* Read status at least once to clear any stale interrupts */ + regmap_read(chip->regmap, STUSB160X_ALERT_STATUS, &val); + regmap_read(chip->regmap, STUSB160X_CC_CONNECTION_STATUS_TRANS, &val); + regmap_read(chip->regmap, STUSB160X_MONITORING_STATUS_TRANS, &val); + regmap_read(chip->regmap, STUSB160X_HW_FAULT_STATUS_TRANS, &val); + + return 0; +} + +static int stusb160x_get_fw_caps(struct stusb160x *chip, + struct fwnode_handle *fwnode) +{ + const char *cap_str; + int ret; + + chip->capability.fwnode = fwnode; + + /* + * Supported port type can be configured through device tree + * else it is read from chip registers in stusb160x_get_caps. + */ + ret = fwnode_property_read_string(fwnode, "power-role", &cap_str); + if (!ret) { + chip->port_type = typec_find_port_power_role(cap_str); + if (chip->port_type < 0) { + ret = chip->port_type; + return ret; + } + } + chip->capability.type = chip->port_type; + + /* Skip DRP/Source capabilities in case of Sink only */ + if (chip->port_type == TYPEC_PORT_SNK) + return 0; + + if (chip->port_type == TYPEC_PORT_DRP) + chip->capability.prefer_role = TYPEC_SINK; + + /* + * Supported power operation mode can be configured through device tree + * else it is read from chip registers in stusb160x_get_caps. + */ + ret = fwnode_property_read_string(fwnode, "power-opmode", &cap_str); + if (!ret) { + chip->pwr_opmode = typec_find_pwr_opmode(cap_str); + /* Power delivery not yet supported */ + if (chip->pwr_opmode < 0 || + chip->pwr_opmode == TYPEC_PWR_MODE_PD) { + ret = chip->pwr_opmode < 0 ? chip->pwr_opmode : -EINVAL; + dev_err(chip->dev, "bad power operation mode: %d\n", + chip->pwr_opmode); + return ret; + } + } + + return 0; +} + +static int stusb160x_get_caps(struct stusb160x *chip) +{ + enum typec_port_type *type = &chip->capability.type; + enum typec_port_data *data = &chip->capability.data; + enum typec_accessory *accessory = chip->capability.accessory; + u32 val; + int ret; + + chip->capability.revision = USB_TYPEC_REV_1_2; + + ret = regmap_read(chip->regmap, STUSB160X_CC_POWER_MODE_CTRL, &val); + if (ret) + return ret; + + switch (FIELD_GET(STUSB160X_CC_POWER_MODE, val)) { + case SOURCE_WITH_ACCESSORY: + *type = TYPEC_PORT_SRC; + *data = TYPEC_PORT_DFP; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + case SINK_WITH_ACCESSORY: + *type = TYPEC_PORT_SNK; + *data = TYPEC_PORT_UFP; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + case SINK_WITHOUT_ACCESSORY: + *type = TYPEC_PORT_SNK; + *data = TYPEC_PORT_UFP; + break; + case DUAL_WITH_ACCESSORY: + case DUAL_WITH_ACCESSORY_AND_TRY_SRC: + case DUAL_WITH_ACCESSORY_AND_TRY_SNK: + *type = TYPEC_PORT_DRP; + *data = TYPEC_PORT_DRD; + *accessory++ = TYPEC_ACCESSORY_AUDIO; + *accessory++ = TYPEC_ACCESSORY_DEBUG; + break; + default: + return -EINVAL; + } + + chip->port_type = *type; + chip->pwr_opmode = stusb160x_get_pwr_opmode(chip); + + return 0; +} + +static const struct of_device_id stusb160x_of_match[] = { + { .compatible = "st,stusb1600", .data = &stusb1600_regmap_config}, + {}, +}; + +static int stusb160x_probe(struct i2c_client *client) +{ + struct stusb160x *chip; + const struct of_device_id *match; + struct regmap_config *regmap_config; + struct fwnode_handle *fwnode; + int ret; + + chip = devm_kzalloc(&client->dev, sizeof(struct stusb160x), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + + match = i2c_of_match_device(stusb160x_of_match, client); + regmap_config = (struct regmap_config *)match->data; + chip->regmap = devm_regmap_init_i2c(client, regmap_config); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + dev_err(&client->dev, + "Failed to allocate register map:%d\n", ret); + return ret; + } + + chip->dev = &client->dev; + + chip->vsys_supply = devm_regulator_get_optional(chip->dev, "vsys"); + if (IS_ERR(chip->vsys_supply)) { + ret = PTR_ERR(chip->vsys_supply); + if (ret != -ENODEV) + return ret; + chip->vsys_supply = NULL; + } + + chip->vdd_supply = devm_regulator_get_optional(chip->dev, "vdd"); + if (IS_ERR(chip->vdd_supply)) { + ret = PTR_ERR(chip->vdd_supply); + if (ret != -ENODEV) + return ret; + chip->vdd_supply = NULL; + } + + chip->vconn_supply = devm_regulator_get_optional(chip->dev, "vconn"); + if (IS_ERR(chip->vconn_supply)) { + ret = PTR_ERR(chip->vconn_supply); + if (ret != -ENODEV) + return ret; + chip->vconn_supply = NULL; + } + + fwnode = device_get_named_child_node(chip->dev, "connector"); + if (IS_ERR(fwnode)) + return PTR_ERR(fwnode); + + /* + * When both VDD and VSYS power supplies are present, the low power + * supply VSYS is selected when VSYS voltage is above 3.1 V. + * Otherwise VDD is selected. + */ + if (chip->vdd_supply && + (!chip->vsys_supply || + (regulator_get_voltage(chip->vsys_supply) <= 3100000))) + chip->main_supply = chip->vdd_supply; + else + chip->main_supply = chip->vsys_supply; + + if (chip->main_supply) { + ret = regulator_enable(chip->main_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable main supply: %d\n", ret); + goto fwnode_put; + } + } + + /* Get configuration from chip */ + ret = stusb160x_get_caps(chip); + if (ret) { + dev_err(chip->dev, "Failed to get port caps: %d\n", ret); + goto main_reg_disable; + } + + /* Get optional re-configuration from device tree */ + ret = stusb160x_get_fw_caps(chip, fwnode); + if (ret) { + dev_err(chip->dev, "Failed to get connector caps: %d\n", ret); + goto main_reg_disable; + } + + ret = stusb160x_chip_init(chip); + if (ret) { + dev_err(chip->dev, "Failed to init port: %d\n", ret); + goto main_reg_disable; + } + + chip->port = typec_register_port(chip->dev, &chip->capability); + if (!chip->port) { + ret = -ENODEV; + goto all_reg_disable; + } + + /* + * Default power operation mode initialization: will be updated upon + * attach/detach interrupt + */ + typec_set_pwr_opmode(chip->port, chip->pwr_opmode); + + if (client->irq) { + ret = stusb160x_irq_init(chip, client->irq); + if (ret) + goto port_unregister; + + chip->role_sw = fwnode_usb_role_switch_get(fwnode); + if (IS_ERR(chip->role_sw)) { + ret = PTR_ERR(chip->role_sw); + if (ret != -EPROBE_DEFER) + dev_err(chip->dev, + "Failed to get usb role switch: %d\n", + ret); + goto port_unregister; + } + } else { + /* + * If Source or Dual power role, need to enable VDD supply + * providing Vbus if present. In case of interrupt support, + * VDD supply will be dynamically managed upon attach/detach + * interrupt. + */ + if (chip->port_type != TYPEC_PORT_SNK && chip->vdd_supply) { + ret = regulator_enable(chip->vdd_supply); + if (ret) { + dev_err(chip->dev, + "Failed to enable VDD supply: %d\n", + ret); + goto port_unregister; + } + chip->vbus_on = true; + } + } + + fwnode_handle_put(fwnode); + + return 0; + +port_unregister: + typec_unregister_port(chip->port); +all_reg_disable: + if (stusb160x_get_vconn(chip)) + stusb160x_set_vconn(chip, false); +main_reg_disable: + if (chip->main_supply) + regulator_disable(chip->main_supply); +fwnode_put: + fwnode_handle_put(fwnode); + + return ret; +} + +static int stusb160x_remove(struct i2c_client *client) +{ + struct stusb160x *chip = i2c_get_clientdata(client); + + if (chip->partner) { + typec_unregister_partner(chip->partner); + chip->partner = NULL; + } + + if (chip->vbus_on) + regulator_disable(chip->vdd_supply); + + if (chip->role_sw) + usb_role_switch_put(chip->role_sw); + + typec_unregister_port(chip->port); + + if (stusb160x_get_vconn(chip)) + stusb160x_set_vconn(chip, false); + + if (chip->main_supply) + regulator_disable(chip->main_supply); + + return 0; +} + +static int __maybe_unused stusb160x_suspend(struct device *dev) +{ + struct stusb160x *chip = dev_get_drvdata(dev); + + /* Mask interrupts */ + return regmap_update_bits(chip->regmap, + STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_ALL_ALERTS, STUSB160X_ALL_ALERTS); +} + +static int __maybe_unused stusb160x_resume(struct device *dev) +{ + struct stusb160x *chip = dev_get_drvdata(dev); + u32 status; + int ret; + + ret = regcache_sync(chip->regmap); + if (ret) + return ret; + + /* Check if attach/detach occurred during low power */ + ret = regmap_read(chip->regmap, + STUSB160X_CC_CONNECTION_STATUS, &status); + if (ret) + return ret; + + if (chip->partner && !(status & STUSB160X_CC_ATTACH)) + stusb160x_detach(chip, status); + + if (!chip->partner && (status & STUSB160X_CC_ATTACH)) { + ret = stusb160x_attach(chip, status); + if (ret) + dev_err(chip->dev, "attach failed: %d\n", ret); + } + + /* Unmask interrupts */ + return regmap_write_bits(chip->regmap, STUSB160X_ALERT_STATUS_MASK_CTRL, + STUSB160X_CC_CONNECTION, 0); +} + +static SIMPLE_DEV_PM_OPS(stusb160x_pm_ops, stusb160x_suspend, stusb160x_resume); + +static struct i2c_driver stusb160x_driver = { + .driver = { + .name = "stusb160x", + .pm = &stusb160x_pm_ops, + .of_match_table = stusb160x_of_match, + }, + .probe_new = stusb160x_probe, + .remove = stusb160x_remove, +}; +module_i2c_driver(stusb160x_driver); + +MODULE_AUTHOR("Amelie Delaunay "); +MODULE_DESCRIPTION("STMicroelectronics STUSB160x Type-C controller driver"); +MODULE_LICENSE("GPL v2"); From patchwork Thu Jul 23 12:06:23 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 11680751 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 69255913 for ; Thu, 23 Jul 2020 12:07:11 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 50AA422BEA for ; Thu, 23 Jul 2020 12:07:11 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="e/Dg+LR6" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728666AbgGWMHE (ORCPT ); Thu, 23 Jul 2020 08:07:04 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:59703 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728436AbgGWMGy (ORCPT ); Thu, 23 Jul 2020 08:06:54 -0400 Received: from pps.filterd (m0046037.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 06NC5NHJ007521; Thu, 23 Jul 2020 14:06:38 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=STMicroelectronics; bh=nAXLB7m1msCYVcwfm/hTe40ubO9ITm6M7ic6gn2Tz54=; b=e/Dg+LR6g4QLg+SkLs29gNOYDmTLYc/IHC3O5Rgt5Q90PYL0GFGa09V7cb529M0lD9pL ngsH6Cbg0mq6+1n45LE+iI9dQjzHDWboNHd5kgj7GifT0N+g5KIIIUEVnhB0LuzXR2y4 GpKETEOjlcmcs/kzB4ZxoKCRE2OGVAVQ9aq6hJm9zguAYVqNm3nLIeqHBJJyKHn7I2PF evIMZSBi1w6fVipAP4nke0NiPEuXaZZcuOnEFdY5/Ou3vaxITWmLa4xNkaW0PBtDcadr tAUrTpazGAx4lpFlWxGYOR4TYUx1SsMTQMS6M98YKP2yKfstCLVi3BxCV/yQxDbj85j6 bg== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 32bs6vabn0-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Jul 2020 14:06:38 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 88DE7100034; Thu, 23 Jul 2020 14:06:38 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag3node2.st.com [10.75.127.8]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 770092AF314; Thu, 23 Jul 2020 14:06:38 +0200 (CEST) Received: from localhost (10.75.127.47) by SFHDAG3NODE2.st.com (10.75.127.8) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Thu, 23 Jul 2020 14:06:38 +0200 From: Amelie Delaunay To: Rob Herring , Greg Kroah-Hartman , Maxime Coquelin , Alexandre Torgue , Russell King , Heikki Krogerus CC: , , , , , Amelie Delaunay , Fabrice Gasnier Subject: [PATCH v2 5/6] ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx Date: Thu, 23 Jul 2020 14:06:23 +0200 Message-ID: <20200723120624.26291-6-amelie.delaunay@st.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200723120624.26291-1-amelie.delaunay@st.com> References: <20200723120624.26291-1-amelie.delaunay@st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.47] X-ClientProxiedBy: SFHDAG5NODE1.st.com (10.75.127.13) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.235,18.0.687 definitions=2020-07-23_05:2020-07-23,2020-07-23 signatures=0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org This patch adds support for STUSB1600 USB Type-C port controller, used on I2C4 on stm32mp15xx-dkx. The default configuration on this board, on Type-C connector, is: - Dual Power Role (DRP), so set power-role to "dual"; - Vbus limited to 500mA, so set power-opmode to "default" (it means 500mA in USB 2.0). power-opmode is used to reconfigure the STUSB1600 advertising of current capability when its NVM is not in line with the board layout. On stm32mp15xx-dkx, Vbus power source of STUSB1600 is 5V_VIN (so add the vin fixed 5V regulator too). So power operation mode depends on the power supply used. To avoid any power issues, it is better to limit Vbus to 500mA on this board. ALERT# is the interrupt pin of STUSB1600. It needs an external pull-up, and signal is active low. USB OTG controller ID and Vbus signals are not connected on stm32mp15xx-dkx boards, so disconnection are not detected. Without DWC2 usb-role-switch: - if you unplug the USB cable from the Type-C port, you have to manually disconnect the USB gadget: echo disconnect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect - Then you can plug the USB cable again in the Type-C port, and manually reconnect the USB gadget: echo connect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect With DWC2 usb-role-switch, USB gadget is dynamically disconnected or connected. Signed-off-by: Amelie Delaunay --- No changes in v2. --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 7 +++++ arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 38 ++++++++++++++++++++++++ 2 files changed, 45 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 7eb858732d6d..55deaa52c3ee 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1574,6 +1574,13 @@ }; }; + stusb1600_pins_a: stusb1600-0 { + pins { + pinmux = ; + bias-pull-up; + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = , /* USART2_TX */ diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 70db923a45f7..8d55f3fd06b3 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -80,6 +80,14 @@ dais = <&sai2a_port &sai2b_port &i2s2_port>; status = "okay"; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -230,6 +238,30 @@ /delete-property/dmas; /delete-property/dma-names; + stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + pinctrl-names = "default"; + pinctrl-0 = <&stusb1600_pins_a>; + status = "okay"; + vdd-supply = <&vin>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + power-opmode = "default"; + + port { + con_usbotg_hs_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + pmic: stpmic@33 { compatible = "st,stpmic1"; reg = <0x33>; @@ -599,6 +631,12 @@ phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; status = "okay"; + + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usbotg_hs_ep>; + }; + }; }; &usbphyc { From patchwork Thu Jul 23 12:06:24 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 11680747 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B0D37618 for ; Thu, 23 Jul 2020 12:07:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 993522086A for ; Thu, 23 Jul 2020 12:07:02 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="xPT0fLTt" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728583AbgGWMGy (ORCPT ); Thu, 23 Jul 2020 08:06:54 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:22110 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728156AbgGWMGx (ORCPT ); Thu, 23 Jul 2020 08:06:53 -0400 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 06NC5shM004235; Thu, 23 Jul 2020 14:06:39 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=STMicroelectronics; bh=V5Yg5rWk6p+tWtdn9VEVBS/h5UR8ezSicEMnrwfjPks=; b=xPT0fLTtuBdeIxW2nib9Y7qDKNCCt/rnKBtodgoCEpuA8EdCmaJbxg+NXqObbFZ7Oi+9 TTUqBFEnFbPLF7mqERLM+rtaNgBvyGhPHKSWCtMpITjgsb14rNNfOJrXGN/TVDmZijF3 SKYK5hKGZS1ZsjL65ng2k1gTNiD4xE7TdPWpmcW/+k3hQGfDN44X23+HrmjV4bw4PFGH CJiBypjR/0GtDTk6DPZN3YAjZ1pRQ2GsyrRFKcCTLKxoykwQDbJHPeGBhOfTFpngQ4iV 3HdkcD0wTo1OxxeCWNC859JCSWsi1wEEXpi5gJ/SnjaKkE1SI0LYIfR0Yl7fsZSrCyjg +g== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 32bsfptfqh-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Jul 2020 14:06:39 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 2721D10002A; Thu, 23 Jul 2020 14:06:39 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag3node2.st.com [10.75.127.8]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 173DB2AF314; Thu, 23 Jul 2020 14:06:39 +0200 (CEST) Received: from localhost (10.75.127.44) by SFHDAG3NODE2.st.com (10.75.127.8) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Thu, 23 Jul 2020 14:06:38 +0200 From: Amelie Delaunay To: Rob Herring , Greg Kroah-Hartman , Maxime Coquelin , Alexandre Torgue , Russell King , Heikki Krogerus CC: , , , , , Amelie Delaunay , Fabrice Gasnier Subject: [PATCH v2 6/6] ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support Date: Thu, 23 Jul 2020 14:06:24 +0200 Message-ID: <20200723120624.26291-7-amelie.delaunay@st.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200723120624.26291-1-amelie.delaunay@st.com> References: <20200723120624.26291-1-amelie.delaunay@st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.44] X-ClientProxiedBy: SFHDAG8NODE2.st.com (10.75.127.23) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.235,18.0.687 definitions=2020-07-23_05:2020-07-23,2020-07-23 signatures=0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Enable support for the STMicroelectronics STUSB160X USB Type-C port controller driver by turning on CONFIG_TYPEC and CONFIG_TYPEC_STUSB160X as modules. Signed-off-by: Amelie Delaunay --- No changes in v2. --- arch/arm/configs/multi_v7_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 95543914d3c7..f85ee102c9a3 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -821,6 +821,8 @@ CONFIG_USB_CONFIGFS_F_HID=y CONFIG_USB_CONFIGFS_F_UVC=y CONFIG_USB_CONFIGFS_F_PRINTER=y CONFIG_USB_ETH=m +CONFIG_TYPEC=m +CONFIG_TYPEC_STUSB160X=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y